* Attempt to roll back stateless mode implementation in a single PR
why:
+ Stateless mode is not fully working and in the way
+ Single PR should make it feasible to investigate for a possible
re-implementation
* Fix copyright year
* Fix annotation for exception (evmc mode)
* Introduce wrapper type for EIP-4844 transactions
EIP-4844 blob sidecars are a concept that only exists in the mempool.
After inclusion of a transaction into an execution block, only the
versioned hash within the transaction remains. To improve type safety,
replace the `Transaction.networkPayload` member with a wrapper type
`PooledTransaction` that is used in contexts where blob sidecars exist.
* Bump nimbus-eth2 to 87605d08a7f9cfc3b223bd32143e93a6cdf351ac
* IPv6 'listen-address' in `nimbus_verified_proxy`
* Bump nim-libp2p to 21cbe3a91a70811522554e89e6a791172cebfef2
* Fix beacon_lc_bridge payload conversion and conf.listenAddress type
* Change nimbus_verified_proxy.asExecutionData param to SomeExecutionPayload
* Rerun nph to fix asExecutionData style format
* nimbus_verified_proxy listenAddress
* Use PooledTransaction in nimbus-eth1 tests
---------
Co-authored-by: jangko <jangko128@gmail.com>
* Aristo: Rename journal related sources and functions
why:
Previously, the naming was hinged on the phrases `fifo`, `filter` etc.
which reflect the inner workings of cascaded filters. This was
unfortunate for reading/understanding the source code for actions where
the focus is the journal as a whole.
* Aristo: Fix buffer overflow (path length truncating error)
* Aristo: Tighten `hikeUp()` stop check, update error code
why:
Detect dangling vertex links. These are legit with `snap` sync
processing but not with regular processing.
* Aristo: Raise assert in regular mode `merge()` at a dangling link/edge
why:
With `snap` sync processing, partial trees are ok and can be amended.
Not so in regular mode.
Previously there was only a debug message when a non-legit dangling edge
was encountered.
* Aristo: Make sure that vertices are copied before modification
why:
Otherwise vertices from lower layers might also be modified
* Aristo: Fix relaxed mode for validity checker `check()`
* Remove cruft
* Aristo: Update API for transaction handling
details:
+ Split `aristo_tx.nim` into sub-modules
+ Split `forkWith()` into `findTx()` + `forkTx()`
+ Removed `forkTop()`, `forkBase()` (now superseded by new `forkTx()`)
* CoreDb+Aristo: Fix initialiser (missing methods)
* Code cosmetics
* Aristo+Kvt: Fix api wrappers
why:
Api setup killed the backend descriptor when backend mapping was
disabled.
* Aristo: Implement masked profiling entries
why:
Database backend should be listed but not counted in tally
* CoreDb: Simplify backend() methods
why:
DBMS backend access Was provided very early and over engineered. Now
there are only two backend machines, one for `Kvt` and the other one
for an `Mpt` available only via new API.
* CoreDb: Code cleanup regarding descriptor types
* CoreDb: Refactor/redefine `persistent()` methods
why:
There were `persistent()` methods for any type of caching storage
facilities `Kvt`, `Mpt`, `Phk`, and `Acc`. Now there is only a single
`persistent()` method storing all facilities in tandem (similar to
how transactions work.)
For non shared `Kvt` tables, there is now an extra storage method
`saveOffSite()`.
* CoreDb lingo update: `trie` becomes `column`
why:
Notion of a `trie` is pretty much hidden by the new `CoreDb` api.
Revealed are sort of database columns for accounts an storage data,
any of which have an internal state represented by a Keccack hash.
So a `trie` or `MPT` becomes a `column` and a `rootHash` becomes a
column state.
* Aristo: rename backend filed `filters` => `journal`
* Update full sync logging
details:
+ Disable eth handler noise while syncing
+ Log journal depth (if available)
* Fix copyright year
* Fix cruft and unwanted imports
* Suspend `snap` sync tests
why:
Snap needs to be updated. While this is not done, tests are obsolete
and eat up memory resources only
* Suspend rocks DB timing tests
why:
Currently of no use for general test suite.
* Mothballed unused evm code for opportunistic DB handling
why:
Needs to be refactored anyway. Uses hard coded protocol dependencies.
* Update `eth` protocol configuration
why:
+ new upcoming version `eth68`
+ prepare for eth-multi protocol stack support
* Strip the `legacy_` prefix from eth66 compiler flag variable
why:
Being it is an oddity having `eth67_enabled`, `eth68_enabled`, and
`legacy_eth_66_enabled`.
* Providing eth68 stubs
* Fix copyright year
* Fix eth68 stub method name
* Add new RocksNamespaceRef type and remove backups and readonly support from RocksDb KvStore.
* Bump nim-rocksdb to fc2ba4a836b6b47ae1b17d1c45801c7e06585e19
* Fix tests.
* Fix copyright notice.
* Aristo: Provide key-value list signature calculator
detail:
Simple wrappers around `Aristo` core functionality
* Update new API for `CoreDb`
details:
+ Renamed new API functions `contains()` => `hasKey()` or `hasPath()`
which disables the `in` operator on non-boolean `contains()` functions
+ The functions `get()` and `fetch()` always return a not-found error if
there is no item, available. The new functions `getOrEmpty()` and
`mergeOrEmpty()` return an an empty `Blob` if there is no such key
found.
* Rewrite `core_apps.nim` using new API from `CoreDb`
* Use `Aristo` functionality for calculating Merkle signatures
details:
For debugging, the `VerifyAristoForMerkleRootCalc` can be set so
that `Aristo` results will be verified against the legacy versions.
* Provide general interface for Merkle signing key-value tables
details:
Export `Aristo` wrappers
* Activate `CoreDb` tests
why:
Now, API seems to be stable enough for general tests.
* Update `toHex()` usage
why:
Byteutils' `toHex()` is superior to `toSeq.mapIt(it.toHex(2)).join`
* Split `aristo_transcode` => `aristo_serialise` + `aristo_blobify`
why:
+ Different modules for different purposes
+ `aristo_serialise`: RLP encoding/decoding
+ `aristo_blobify`: Aristo database encoding/decoding
* Compacted representation of small nodes' links instead of Keccak hashes
why:
Ethereum MPTs use Keccak hashes as node links if the size of an RLP
encoded node is at least 32 bytes. Otherwise, the RLP encoded node
value is used as a pseudo node link (rather than a hash.) Such a node
is nor stored on key-value database. Rather the RLP encoded node value
is stored instead of a lode link in a parent node instead. Only for
the root hash, the top level node is always referred to by the hash.
This feature needed an abstraction of the `HashKey` object which is now
either a hash or a blob of length at most 31 bytes. This leaves two
ways of representing an empty/void `HashKey` type, either as an empty
blob of zero length, or the hash of an empty blob.
* Update `CoreDb` interface (mainly reducing logger noise)
* Fix copyright years (to make `Lint` happy)
* CoreDB: Re-org API
details:
Legacy API internally uses vertex ID for root node abstraction
* Cosmetics: Move some unit test helpers to common sub-directory
* Extract constant from `accouns_cache.nim` => `constants.nim`
* Fix tracer methods
why:
Logger dump data were wrongly dumped from the production database. This
caused an assert exception when iterating over the persistent database
(instead of the memory logger.) This event in turn was enabled after
fixing another inconsistency which just set up an empty iterator. Unit
tests failed to detect that.
* Split `core_db/base.nim` into several sources
* Rename `core_db/legacy.nim` => `core_db/legacy_db.nim`
* Update `CoreDb` API, dual methods returning `Result[]` or plain value
detail:
Plain value methods implemet the legacy API, they defect on error results
* Redesign `CoreDB` direct backend access
why:
Made the `backend` directive integral part of the API
* Discontinue providing unused or otherwise available functions
details:
+ setTransactionID() removed, not used and not easily replicable in Aristo
+ maybeGet() removed, available via direct backend access
+ newPhk() removed, never used & was experimental anyway
* Update/reorg backend API
why:
+ Added error print function `$$()`
+ General descriptor completion (and optional validation) via `bless()`
* Update `Aristo`/`Kvt` exception handling
why:
Avoid `CatchableError` exceptions, rather pass them as error code where
appropriate.
* More `CoreDB` compliant `Aristo` and `Kvt` methods
details:
+ Providing functions like `contains()`, `getVtxRc()` (returns `Result[]`).
+ Additional error code: `NotImplemented`
* Rewrite/reorg of Aristo DB constructor
why:
Previously used global object `DefaultQidLayoutRef` as default
initialiser. This object was created at compile time which lead to
non-gc safe functions.
* Update nimbus/db/core_db/legacy_db.nim
Co-authored-by: Kim De Mey <kim.demey@gmail.com>
* Update nimbus/db/aristo/aristo_transcode.nim
Co-authored-by: Kim De Mey <kim.demey@gmail.com>
* Update nimbus/db/core_db/legacy_db.nim
Co-authored-by: Kim De Mey <kim.demey@gmail.com>
---------
Co-authored-by: Kim De Mey <kim.demey@gmail.com>
* Kvt: Implemented multi-descriptor access on the same backend
why:
This behaviour mirrors the one of Aristo and can be used for
simultaneous transactions on Aristo + Kvt
* Kvt: Update database iterators
why:
Forgot to run on the top layer first
* Kvt: Misc fixes
* Aristo, use `openArray[byte]` rather than `Blob` in prototype
* Aristo, by default hashify right after cloning descriptor
why:
Typically, a completed descriptor is expected after cloning. Hashing
can be suppressed by argument flag.
* Aristo provides `replicate()` iterator, similar to legacy `replicate()`
* Aristo API fixes and updates
* CoreDB: Rename `legacy_persistent` => `legacy_rocksdb`
why:
More systematic, will be in line with Aristo DB which might have
more than one persistent backends
* CoreDB: Prettify API sources
why:
Better to read and maintain
details:
Annotating with custom pragmas which cleans up the prototypes
* CoreDB: Update MPT/put() prototype allowing `CatchableError`
why:
Will be needed for Aristo API (legacy is OK with `RlpError`)
* Nimbus folder environment update
details:
* Integrated `CoreDbRef` for the sources in the `nimbus` sub-folder.
* The `nimbus` program does not compile yet as it needs the updates
in the parallel `stateless` sub-folder.
* Stateless environment update
details:
* Integrated `CoreDbRef` for the sources in the `stateless` sub-folder.
* The `nimbus` program compiles now.
* Premix environment update
details:
* Integrated `CoreDbRef` for the sources in the `premix` sub-folder.
* Fluffy environment update
details:
* Integrated `CoreDbRef` for the sources in the `fluffy` sub-folder.
* Tools environment update
details:
* Integrated `CoreDbRef` for the sources in the `tools` sub-folder.
* Nodocker environment update
details:
* Integrated `CoreDbRef` for the sources in the
`hive_integration/nodocker` sub-folder.
* Tests environment update
details:
* Integrated `CoreDbRef` for the sources in the `tests` sub-folder.
* The unit tests compile and run cleanly now.
* Generalise `CoreDbRef` to any `select_backend` supported database
why:
Generalisation was just missed due to overcoming some compiler oddity
which was tied to rocksdb for testing.
* Suppress compiler warning for `newChainDB()`
why:
Warning was added to this function which must be wrapped so that
any `CatchableError` is re-raised as `Defect`.
* Split off persistent `CoreDbRef` constructor into separate file
why:
This allows to compile a memory only database version without linking
the backend library.
* Use memory `CoreDbRef` database by default
detail:
Persistent DB constructor needs to import `db/core_db/persistent
why:
Most tests use memory DB anyway. This avoids linking `-lrocksdb` or
any other backend by default.
* fix `toLegacyBackend()` availability check
why:
got garbled after memory/persistent split.
* Clarify raw access to MPT for snap sync handler
why:
Logically, `kvt` is not the raw access for the hexary trie (although
this holds for the legacy database)
* Remove 32bit os support from `custom_network` unit test
also:
* Fix compilation annoyance #1648
* Fix unit test on Kiln (changed `merge` logic?)
* Hide unused sources do not compile
why:
* Get them out of the way before major update
* Import and function prototype mismatch -- maybe some changes got out
of scope.
* Re-implemented `db_chain` as `core_db`
why:
Hiding `TrieDatabaseRef` and `HexaryTrie` by default allows to replace
the current db wrapper by some other one, e.g. Aristo
* Support compiler exception warnings for CoreDbRef base methods.
* Allow `pairs()` iterator on all memory based key-value tables
why:
Previously only available for capture recorder.
* Backport `chain_db.nim` changes into its re-implementation `core_apps.nim`
* Fix exception annotation
previously, the withdrawal validation is in process_block only,
but the one in persist block, which is also used in synchronizer
is not validated properly.
* Fix include
why:
Eth67 not default yet so that got missed
* Rename `LeafKey` => `LeafTie`
why:
Name is a pen picture of what this object is for. Also, it avoids the
ubiquitous term `key`.
* Provided `getOrVoid()` wrapper for `getOrDefault()`
also:
Provide `isValid()` syntactic sugar for `.isNil.not`, `!= 0` etc.
Reorg descriptor source, split into sub-sources
* Bundled `NodeKey` objects with root ID and called it `HashLabel`
why:
`NodeKey` (aka repurposed Hash265) objects are unique only within a
particular sub-trie (e.g. storage slots) which are kept separated
(i.e non-interleaved) by design. This is not applied to the backend
as the map VertexID->NodeKey labelling the nodes needs not be injective.
For the in-memory database (transaction) layers, the injective map
VertexID->(VertexID,NodeKey) is used where the first field of the image
tuple is the root ID of the sub-trie the `NodeKey` object is valid. So
identical storage tries for different accounts can be represented.
andri lim
tersec
Jacek Sieka
Jordan Hrycaj
Etan Kissling
BiKangNing
web3-developer
kdeme