This is a minimal set of changes to make things work with the new types
in nim-eth - this is the minimal PR that merely resolves
incompatibilities while the full change set would include more cleanup
and migration.
* Cosmetics, small fixes, add stashed headers verifier
* Remove direct `Era1` support
why:
Era1 is indirectly supported by using the import tool before syncing.
* Clarify database persistent save function.
why:
Function relied on the last saved state block number which was wrong.
It now relies on the tx-level. If it is 0, then data are saved directly.
Otherwise the task that owns the tx will do it.
* Extracted configuration constants into separate file
* Enable single peer mode for debugging
* Fix peer losing issue in multi-mode
details:
Running concurrent download peers was previously programmed as running
a batch downloading and storing ~8k headers and then leaving the `async`
function to be restarted by a scheduler.
This was unfortunate because of occasionally occurring long waiting
times for restart.
While the time gap until restarting were typically observed a few
millisecs, there were always a few outliers which well exceed several
seconds. This seemed to let remote peers run into timeouts.
* Prefix function names `unprocXxx()` and `stagedYyy()` by `headers`
why:
There will be other `unproc` and `staged` modules.
* Remove cruft, update logging
* Fix accounting issue
details:
When staging after fetching headers from the network, there was an off
by 1 error occurring when the result was by one smaller than requested.
Also, a whole range was mis-accounted when a peer was terminating
connection immediately after responding.
* Fix slow/error header accounting when fetching
why:
Originally set for detecting slow headers in a row, the counter
was wrongly extended to general errors.
* Ban peers for a while that respond with too few headers continuously
why:
Some peers only returned one header at a time. If these peers sit on a
farm, they might collectively slow down the download process.
* Update RPC beacon header updater
why:
Old function hook has slightly changed its meaning since it was used
for snap sync. Also, the old hook is used by other functions already.
* Limit number of peers or set to single peer mode
details:
Merge several concepts, single peer mode being one of it.
* Some code clean up, fixings for removing of compiler warnings
* De-noise header fetch related sources
why:
Header download looks relatively stable, so general debugging is not
needed, anymore. This is the equivalent of removing the scaffold from
the part of the building where work has completed.
* More clean up and code prettification for headers stuff
* Implement body fetch and block import
details:
Available headers are used stage blocks by combining existing headers
with newly fetched blocks. Then these blocks are imported/executed via
`persistBlocks()`.
* Logger cosmetics and cleanup
* Remove staged block queue debugging
details:
Feature still available, just not executed anymore
* Docu, logging update
* Update/simplify `runDaemon()`
* Re-calibrate block body requests and soft config for import blocks batch
why:
* For fetching, larger fetch requests are mostly truncated anyway on
MainNet.
* For executing, smaller batch sizes reduce the memory needed for the
price of longer execution times.
* Update metrics counters
* Docu update
* Some fixes, formatting updates, etc.
* Update `borrowed` type: uint -. uint64
also:
Always convert to `uint64` rather than `uint` where appropriate
* init style for Hash256
https://github.com/status-im/nim-eth/pull/733 updates `Hash256` to
become an array instead of an object - unfortunately, nim does not allow
constructing arrays with `name()`, so this PR changes it to `default`
which works with both.
* lint
* Wiring ForkedChainRef to other components
- Disable majority of hive simulators
- Only enable pyspec_sim for the moment
- The pyspec_sim is using a smaller RPC service wired to ForkedChainRef
- The RPC service will gradually grow
* Addressing PR review
* Fix test_beacon/setup_env
* Enable consensus_sim (#2441)
* Enable consensus_sim
* Remove isFile check
* Enable Engine API jwt auth tests and exchange cap tests
* Enable engine api in build_sim.sh
* Wire ForkedChainRef to Engine API newPayload
* Wire Engine API getBodies to ForkedChainRef
* Wire Engine API api_forkchoice to ForkedChainRef
* Wire more RPC methods to ForkedChainRef
* Implement eth_syncing
* Implement eth_call and eth_getlogs
* TxPool: simplify smartHead
* Fix smartHead usage
* Fix txpool headDiff
* Remove hasBlockHeader and use headerExists
* Addressing review
* bump metrics
* Remove cruft
* Cosmetics, update some logging, noise control
* Renamed `CoreDb` function `hasKey` => `hasKeyRc` and provided `hasKey`
why:
Currently, `hasKey` returns a `Result[]` rather than a `bool` which
is what one would expect from a function prototype of this name.
This was a bit of an annoyance and cost unnecessary attention.
* Use block number or timestamp to determine fork rules
Avoid confusion raised by `forkGTE` usage where block informations are present.
* Get rid of forkGTE
* Rename `newKvt()` -> `ctx.getKvt()`
why:
Clean up legacy shortcut. Also, the `KVT` returned is not instantiated
but refers to the shared `KVT` that resides in a context which is a
generalisation of an in-memory database fork. The function `ctx`
retrieves the default context.
* Rename `newTransaction()` -> `ctx.newTransaction()`
why:
Clean up legacy shortcut. The transaction is applied to a context as a
generalisation of an in-memory database fork. The function `ctx`
retrieves the default context.
* Rename `getColumn(CtGeneric)` -> `getGeneric()`
why:
No more a list of well known sub-tries needed, a single one is enough.
In fact, `getColumn()` did only support a single sub-tree by now.
* Reduce TODO list
* Simplify txpool baseFeeGet
- Avoid using toEVMFork because we are not in EVM
- Rename `isLondon` to `isLondonOrLater`
* Remove timestamp from isLondonOrLater
* CoreDb: remove PHK tries
why:
There is no general use anymore for an MPT with a pre-hashed key. It
was used to resemble the `SecureHexaryTrie` logic from the legacy DB.
The only pace where this is needed is the `Leger` which uses a
a distinct MPT version anyway (see `distinct_ledgers.nim`.)
* Rename `CoreDx*` -> `CoreDb*`
why:
The naming `CoreDx*` was used to differentiate the new CoreDb API from
the legacy API which had descriptors named `CoreDb*`.
* Bump nim-eth, nim-web3, nimbus-eth2
- Replace std.Option with results.Opt
- Fields name changes
* More fixes
* Fix Portal stream async raises and portal testnet Opt usage
* Bump eth + nimbus-eth2 + more fixes related to eth_types changes
* Fix in utp test app and nimbus-eth2 bump
* Fix test_blockchain_json rebase conflict
* Fix EVMC block_timestamp conversion plus commentary
---------
Co-authored-by: kdeme <kim.demey@gmail.com>
This PR consolidates the split header-body sequences into a single EthBlock
sequence and cleans up the fallout from that which significantly reduces
block processing overhead during import thanks to less garbage collection
and fewer copies of things all around.
Notably, since the number of headers must always match the number of bodies,
we also get rid of a pointless degree of freedom that in the future could
introduce unnecessary bugs.
* only read header and body from era file
* avoid several unnecessary copies along the block processing way
* simplify signatures, cleaning up unused arguemnts and returns
* use `stew/assign2` in a few strategic places where the generated
nim assignent is slow and add a few `move` to work around poor
analysis in nim 1.6 (will need to be revisited for 2.0)
```
stats-20240607_2223-a814aa0b.csv vs stats-20240608_0714-21c1d0a9.csv
bps_x bps_y tps_x tps_y bpsd tpsd timed
block_number
(498305, 713245] 1,540.52 1,809.73 2,361.58 2775.340189 17.63% 17.63% -14.92%
(713245, 928185] 730.36 865.26 1,715.90 2028.973852 18.01% 18.01% -15.21%
(928185, 1143126] 663.03 789.10 2,529.26 3032.490771 19.79% 19.79% -16.28%
(1143126, 1358066] 393.46 508.05 2,152.50 2777.578119 29.13% 29.13% -22.50%
(1358066, 1573007] 370.88 440.72 2,351.31 2791.896052 18.81% 18.81% -15.80%
(1573007, 1787947] 283.65 335.11 2,068.93 2441.373402 17.60% 17.60% -14.91%
(1787947, 2002888] 287.29 342.11 2,078.39 2474.179448 18.99% 18.99% -15.91%
(2002888, 2217828] 293.38 343.16 2,208.83 2584.77457 17.16% 17.16% -14.61%
(2217828, 2432769] 140.09 167.86 1,081.87 1296.336926 18.82% 18.82% -15.80%
blocks: 1934464, baseline: 3h13m1s, contender: 2h43m47s
bpsd (mean): 19.55%
tpsd (mean): 19.55%
Time (total): -29m13s, -15.14%
```
* CoreDb: Remove crufty second/off-site KVT
why:
Was used to allow late `Clique` to store directly to disk
* CoreDb: Remove prune flag related functionality
why:
Is completely legacy stuff
* CoreDb: Remove dependence on legacy API (tests unsupported yet)
why:
Does not fully support Aristo
* Re-factoring `state_db` using new API
details:
Only minimum changes needed to compile `nimbus`
* Update tests and aux modules
* Turn off legacy API and remove `distinct_tries`
comment:
The legacy API has now cruft status, will be removed soon
* Fix copyright years
* Update rpc for verified proxy
---------
Co-authored-by: Jacek Sieka <jacek@status.im>
This PR extends the `nimbus import` command to also allow reading from
era files - this command allows creating or topping up an existing
database with data coming from era files instead of network sync.
* add `--era1-dir` and `--max-blocks` options to command line
* make `persistBlocks` report basic stats like transactions and gas
* improve error reporting in several API
* allow importing multiple RLP files in one go
* clean up logging options to match nimbus-eth2
* make sure database is closed properly on shutdown
* Update TDD suite logger output format choices
why:
New format is not practical for TDD as it just dumps data across a wide
range (considerably larder than 80 columns.)
So the new format can be turned on by function argument.
* Update unit tests samples configuration
why:
Slightly changed the way to find the `era1` directory
* Remove compiler warnings (fix deprecated expressions and phrases)
* Update `Aristo` debugging tools
* Always update the `storageID` field of account leaf vertices
why:
Storage tries are weekly linked to an account leaf object in that
the `storageID` field is updated by the application.
Previously, `Aristo` verified that leaf objects make sense when passed
to the database. As a consequence
* the database was inconsistent for a short while
* the burden for correctness was all on the application which led
to delayed error handling which is hard to debug.
So `Aristo` will internally update the account leaf objects so that
there are no race conditions due to the storage trie handling
* Aristo: Let `stow()`/`persist()` bail out unless there is a `VertexID(1)`
why:
The journal and filter logic depends on the hash of the `VertexID(1)`
which is commonly known as the state root. This implies that all
changes to the database are somehow related to that.
* Make sure that a `Ledger` account does not overwrite the storage trie reference
why:
Due to the abstraction of a sub-trie (now referred to as column with a
hash describing its state) there was a weakness in the `Aristo` handler
where an account leaf could be overwritten though changing the validity
of the database. This has been changed and the database will now reject
such changes.
This patch fixes the behaviour on the application layer. In particular,
the column handle returned by the `CoreDb` needs to be updated by
the `Aristo` database state. This mitigates the problem that a storage
trie might have vanished or re-apperaed with a different vertex ID.
* Fix sub-trie deletion test
why:
Was originally hinged on `VertexID(1)` which cannot be wholesale
deleted anymore after the last Aristo update. Also, running with
`VertexID(2)` needs an artificial `VertexID(1)` for making `stow()`
or `persist()` work.
* Cosmetics
* Activate `test_generalstate_json`
* Temporarily `deactivate test_tracer_json`
* Fix copyright header
---------
Co-authored-by: jordan <jordan@dry.pudding>
Co-authored-by: Jacek Sieka <jacek@status.im>
* Update some docu & messages
* Remove cruft from the ledger modules
* Must not overwrite genesis data on an initialised database
why:
This will overwrite the global state of the Aristo single state DB.
Otherwise resuming at the last synced state becomes impossible.
* Provide latest block number from journal
why:
This relates the global state of the DB directly to the corresponding
block number.
* Implemented unit test providing DB pre-load and resume
* CoreDb: Provide default db backend symbols
why:
Handy for running `Aristo` against standard tests
note:
These defaults are currently set to legacy DB types. The must be
enabled manually in `db/core_db.nim`.
* Provide `Aristo` for macro assembler related tests
caveat:
Some tests use `initStorageTrie()` which lets `Aristo` bail out. The
test need to run on `distinct_ledgers` (or something like) rather than
`distinct_tries`.
* Tests: Misc modules that can run on `Aristo` as well
* NoHive: Module that can run on `Aristo` as well
* Fix copyright year
* ditto
* Activate `LedgerRef` wrapper for `AccountsCache`
details:
`accounts_cache.nim` methods are indirectly processed by the wrapper
methods from `ledger.nim`.
This works for all sources except `test_state_db.nim` where the source
`accounts_cache.nim` is included (rather than imported) in order to
access objects privy to the very source.
* Provide facility to switch to a preselected `LedgerRef` type
details:
Can be set as suggestion when initialising `CommonRef`
* Update `CoreDb` test suite for better time tracking
details:
+ Allow time logging by pre-defined block intervals
+ Print `CoreDb`/`Ledger`profiling results (if enabled)
* Fix copyright year
* Show elapsed times with enabled `CoreDb` API tracking
* Show elapsed times with enabled `LedgerRef` API tracking
* Reorg `CoreDb` auto destructors for `Aristo` DB
why:
While `Aristo` supports some parallelism for concurrent database access,
this comes with a price of management overhead. With a naive approach,
the auto-destructor will slow down execution because the ledger and
evm treat the database in a shared mode where a DB descriptor is just
created and thrown away shortly after.
This is reflected in the `Coredb` abstraction layer above `Aristo`/`Kvt`
where a few `Shared` type descriptors are cached and a shared reference
is returned rather than a disposable new object.
* For `CoreDb` support transaction level tracking
details:
This is mainly an extra for the legacy DB as `Aristo` and `Kvt` support
this already.
Also return an error on the legacy DB backend when `persistent()` is
called while there are transactions pending (the `persistent()` call
does nothing otherwise on the legacy backend.)
* Clear compiler warnings (remove unused variables etc.)
* Split off `ReadOnlyStateDB` from `AccountStateDB` from `state_db.nim`
why:
Apart from testing, applications use `ReadOnlyStateDB` as an easy
way to access the accounts ledger. This is well supported by the
`Aristo` db, but writable mode is only parially supported.
The writable AccountStateDB` object for modifying accounts is not
used by production code.
So, for lecgacy and testing apps, the full support of the previous
`AccountStateDB` is now enabled by `import db/state_db/read_write`
and the `import db/state_db` provides read-only mode.
* Encapsulate `AccountStateDB` as `GenesisLedgerRef` or genesis creation
why:
`AccountStateDB` has poor support for `Aristo` and is not widely used
in favour of `AccountsLedger` (which will be abstracted as `ledger`.)
Currently, using other than the `AccountStateDB` ledgers within the
`GenesisLedgerRef` wrapper is experimental and test only. Eventually,
the wrapper should disappear so that the `Ledger` object (which
encapsulates `AccountsCache` and `AccountsLedger`) will prevail.
* For the `Ledger`, provide access to raw accounts `MPT`
why:
This gives to the `CoreDbMptRef` descriptor from the `CoreDb` (which is
the legacy version of CoreDxMptRef`.) For the new `ledger` API, the
accounts are based on the `CoreDxMAccRef` descriptor which uses a
particular sub-system for accounts while legacy applications use the
`CoreDbPhkRef` equivalent of the `SecureHexaryTrie`.
The only place where this feature will currently be used is the
`genesis.nim` source file.
* Fix `Aristo` bugs, missing boundary checks, typos, etc.
* Verify root vertex in `MPT` and account constructors
why:
Was missing so far, in particular the accounts constructor must
verify `VertexID(1)
* Fix include file
Jacek Sieka
Jordan Hrycaj
tersec
andri lim
Kim De Mey