Our need is only a baseline tx pool gasLimit calculator.
If need we can expand it in the future.
But for now, a simple but understandable tx pool is more important.
* Use block number or timestamp to determine fork rules
Avoid confusion raised by `forkGTE` usage where block informations are present.
* Get rid of forkGTE
* Rename `newKvt()` -> `ctx.getKvt()`
why:
Clean up legacy shortcut. Also, the `KVT` returned is not instantiated
but refers to the shared `KVT` that resides in a context which is a
generalisation of an in-memory database fork. The function `ctx`
retrieves the default context.
* Rename `newTransaction()` -> `ctx.newTransaction()`
why:
Clean up legacy shortcut. The transaction is applied to a context as a
generalisation of an in-memory database fork. The function `ctx`
retrieves the default context.
* Rename `getColumn(CtGeneric)` -> `getGeneric()`
why:
No more a list of well known sub-tries needed, a single one is enough.
In fact, `getColumn()` did only support a single sub-tree by now.
* Reduce TODO list
This significantly speeds up block import at the cost of less protection
against invalid data, potentially resulting in an invalid database
getting stored.
The risk is small given that import is used only for validated data -
evaluating the right level of of validation vs performance is left for a
future PR.
A side effect of this approach is that there is no cached stated root in
the database - computing it currently requires a lot of memory since the
intermediate roots get cached in memory in full while the computation is
ongoing - a future PR will need to address this deficiency, for example
by streaming the already-computed hashes directly to the database.
* avoid costly hike memory allocations for operations that don't need to
re-traverse it
* avoid unnecessary state checks (which might trigger unwanted state
root computations)
* disable optimize-for-hits due to the MPT no longer being complete at
all times
* Use simpler schema when writing transactions, receipts, and withdrawals
Using MPT not only slow but also take up more spaces than needed.
Aristo will remove older tries and only keep the last block tries.
Using simpler schema will avoid those problems.
* Rename getTransaction to getTransactionByIndex
* rebased from `github/on-demand-mpt`
ackn:
wip: on-demand mpt construction
Given that actual data is stored in the `Vertex` structure, it's useful
to think of the MPT as a cache for computing roots rather than being a
functional requirement on its own.
This PR engenders this line of thinking by incrementally computing the
MPT only when it's needed, ie when a state (or similar) root is needed.
This has the effect of siginficantly reducing memory usage as well as
improving performance:
* no need for dirty-mpt-node book-keeping
* no need to build complex forest of upcoming hashing work
* only hashes that are functionally needed are ever computed -
intermediate nodes whose MTP root is not observed are never computed /
processed
* Unit test hot fixes
* Unit test hot fixes cont.
(somehow lost that part)
---------
Co-authored-by: Jacek Sieka <jacek@status.im>
* Tighten `CoreDb` API for accounts
why:
Apart from cruft, the way to fetch the accounts state root via a
`CoreDbColRef` record was unnecessarily complicated.
* Extend `CoreDb` API for accounts to cover storage tries
why:
In future, this will make the notion of column objects obsolete. Storage
trees will then be indexed by the account address rather than the vertex
ID equivalent like a `CoreDbColRef`.
* Apply new/extended accounts API to ledger and tests
details:
This makes the `distinct_ledger` module obsolete
* Remove column object constructors
why:
They were needed as an abstraction of MPT sub-trees including storage
trees. Now, storage trees are handled by the account (e.g. via address)
they belong to and all other trees can be identified by a constant well
known vertex ID. So there is no need for column objects anymore.
Still there are some left-over column object methods wnich will be
removed next.
* Remove `serialise()` and `PayloadRef` from default Aristo API
why:
Not needed. `PayloadRef` was used for unstructured/unknown payload
formats (account or blob) and `serialise()` was used for decodng
`PayloadRef`. Now it is known in advance what the payload looks
like.
* Added query function `hasStorageData()` whether a storage area exists
why:
Useful for supporting `slotStateEmpty()` of the `CoreDb` API
* In the `Ledger` replace `storage.stateEmpty()` by `slotStateEmpty()`
* On Aristo, hide the storage root/vertex ID in the `PayloadRef`
why:
The storage vertex ID is fully controlled by Aristo while the
`AristoAccount` object is controlled by the application. With the
storage root part of the `AristoAccount` object, there was a useless
administrative burden to keep that storage root field up to date.
* Remove cruft, update comments etc.
* Update changed MPT access paradigms
why:
Fixes verified proxy tests
* Fluffy cosmetics
* Simplify txpool baseFeeGet
- Avoid using toEVMFork because we are not in EVM
- Rename `isLondon` to `isLondonOrLater`
* Remove timestamp from isLondonOrLater
* ForkedChain implementation
- revamp test_blockchain_json using ForkedChain
- re-enable previously failing test cases.
* Remove excess error handling
* Avoid reloading parent header
* Do not force base update
* Write baggage to database
* Add findActiveChain to finalizedSegment
* Create new stagingTx in addBlock
* Check last stateRoot existence in test_blockchain_json
* Resolve rebase conflict
* More precise nomenclature for block import cursor
* Ensure bad block nor imported and good block not rejected
* finalizeSegment become forkChoice and align with engine API forkChoice spec
* Display reason when good block rejected
* Fix comments
* Put BaseDistance into CalculateNewBase equation
* Separate finalizedHash from baseHash
* Add more doAssert constraint
* Add push raises: []
When processing long ranges of blocks, the account cache grows unbounded
which cause huge memory spikes.
Here, we move the cache to a second-level cache after each block - the
second-level cache is cleared on the next block after that which creates
a simple LRU effect.
There's a small performance cost of course, though overall the freed-up
memory can now be reassigned to the rocksdb row cache which not only
makes up for the loss but overall leads to a performance increase.
The bump to 2gb of rocksdb row cache here needs more testing but is
slightly less and loosely basedy on the savings from this PR and the
circular ref fix in #2408 - another way to phrase this is that it's
better to give rocksdb more breathing room than let the memory sit
unused until circular ref collection happens ;)
This buffer eleminates a large part of allocations during MPT traversal,
reducing overall memory usage and GC pressure.
Ideally, we would use it throughout in the API instead of
`openArray[byte]` since the built-in length limit appropriately exposes
the natural 64-nibble depth constraint that `openArray` fails to
capture.
It is common for many accounts to share the same code - at the database
level, code is stored by hash meaning only one copy exists per unique
program but when loaded in memory, a copy is made for each account.
Further, every time we execute the code, it must be scanned for invalid
jump destinations which slows down EVM exeuction.
Finally, the extcodesize call causes code to be loaded even if only the
size is needed.
This PR improves on all these points by introducing a shared
CodeBytesRef type whose code section is immutable and that can be shared
between accounts. Further, a dedicated `len` API call is added so that
the EXTCODESIZE opcode can operate without polluting the GC and code
cache, for cases where only the size is requested - rocksdb will in this
case cache the code itself in the row cache meaning that lookup of the
code itself remains fast when length is asked for first.
With 16k code entries, there's a 90% hit rate which goes up to 99%
during the 2.3M attack - the cache significantly lowers memory
consumption and execution time not only during this event but across the
board.
* CoreDb: remove PHK tries
why:
There is no general use anymore for an MPT with a pre-hashed key. It
was used to resemble the `SecureHexaryTrie` logic from the legacy DB.
The only pace where this is needed is the `Leger` which uses a
a distinct MPT version anyway (see `distinct_ledgers.nim`.)
* Rename `CoreDx*` -> `CoreDb*`
why:
The naming `CoreDx*` was used to differentiate the new CoreDb API from
the legacy API which had descriptors named `CoreDb*`.
Broadly, when importing blocks we don't need a transaction / frame per
block because we can simply abort the whole update and try again with a
smaller range if we find a faulty block.
Of course, this applies mainly to semi-trusted blocks where we're not
expected to fail in applying them - this could be blocks either from
files or header-verified blocks as given by consensus.
When performing block import, we can batch state root verifications and
header checks, doing them only once per chunk of blocks, assuming that
the other blocks in the batch are valid by extension.
When we're not generating receipts, we can also skip per-transaction
state root computation pre-byzantium, which is what provides a ~20%
speedup in this PR, at least on those early blocks :)
We also stop storing transactions, receipts and uncles redundantly when
importing from era1 - there is no need to waste database storage on this
when we can load it from the era1 file (eventually).
State lookups potentially trigger expensive re-hashings - this is the
first of several steps to remove the unnecessary ones from the general
flow of block processing
* avoid re-reading parent block header from database when it's already
in memory
* Bump nim-eth, nim-web3, nimbus-eth2
- Replace std.Option with results.Opt
- Fields name changes
* More fixes
* Fix Portal stream async raises and portal testnet Opt usage
* Bump eth + nimbus-eth2 + more fixes related to eth_types changes
* Fix in utp test app and nimbus-eth2 bump
* Fix test_blockchain_json rebase conflict
* Fix EVMC block_timestamp conversion plus commentary
---------
Co-authored-by: kdeme <kim.demey@gmail.com>
* bump rockdb
* Rename `KVT` objects related to filters according to `Aristo` naming
details:
filter* => delta*
roFilter => balancer
* Compulsory error handling if `persistent()` fails
* Add return code to `reCentre()`
why:
Might eventually fail if re-centring is blocked. Some logic will be
added in subsequent patch sets.
* Add column families from earlier session to rocksdb in opening procedure
why:
All previously used CFs must be declared when re-opening an existing
database.
* Update `init()` and add rocksdb `reinit()` methods for changing parameters
why:
Opening a set column families (with different open options) must span
at least the ones that are already on disk.
* Provide write-trigger-event interface into `Aristo` backend
why:
This allows to save data from a guest application (think `KVT`) to
get synced with the write cycle so the guest and `Aristo` save all
atomically.
* Use `KVT` with new column family interface from `Aristo`
* Remove obsolete guest interface
* Implement `KVT` piggyback on `Aristo` backend
* CoreDb: Add separate `KVT`/`Aristo` backend mode for debugging
* Remove `rocks_db` import from `persist()` function
why:
Some systems (i.p `fluffy` and friends) use the `Aristo` memory
backend emulation and do not link against rocksdb when building the
application. So this should fix that problem.
`initTable` is obsolete since nim 0.19 and can introduce significant
memory overhead while providing no benefit (since the table will be
grown to the default initial size on first use anyway).
In particular, aristo layers will not necessarily use all tables they
initialize, for exampe when many empty accounts are being created.
This PR consolidates the split header-body sequences into a single EthBlock
sequence and cleans up the fallout from that which significantly reduces
block processing overhead during import thanks to less garbage collection
and fewer copies of things all around.
Notably, since the number of headers must always match the number of bodies,
we also get rid of a pointless degree of freedom that in the future could
introduce unnecessary bugs.
* only read header and body from era file
* avoid several unnecessary copies along the block processing way
* simplify signatures, cleaning up unused arguemnts and returns
* use `stew/assign2` in a few strategic places where the generated
nim assignent is slow and add a few `move` to work around poor
analysis in nim 1.6 (will need to be revisited for 2.0)
```
stats-20240607_2223-a814aa0b.csv vs stats-20240608_0714-21c1d0a9.csv
bps_x bps_y tps_x tps_y bpsd tpsd timed
block_number
(498305, 713245] 1,540.52 1,809.73 2,361.58 2775.340189 17.63% 17.63% -14.92%
(713245, 928185] 730.36 865.26 1,715.90 2028.973852 18.01% 18.01% -15.21%
(928185, 1143126] 663.03 789.10 2,529.26 3032.490771 19.79% 19.79% -16.28%
(1143126, 1358066] 393.46 508.05 2,152.50 2777.578119 29.13% 29.13% -22.50%
(1358066, 1573007] 370.88 440.72 2,351.31 2791.896052 18.81% 18.81% -15.80%
(1573007, 1787947] 283.65 335.11 2,068.93 2441.373402 17.60% 17.60% -14.91%
(1787947, 2002888] 287.29 342.11 2,078.39 2474.179448 18.99% 18.99% -15.91%
(2002888, 2217828] 293.38 343.16 2,208.83 2584.77457 17.16% 17.16% -14.61%
(2217828, 2432769] 140.09 167.86 1,081.87 1296.336926 18.82% 18.82% -15.80%
blocks: 1934464, baseline: 3h13m1s, contender: 2h43m47s
bpsd (mean): 19.55%
tpsd (mean): 19.55%
Time (total): -29m13s, -15.14%
```
* Cleanup unneeded stateless and block witness code. Keeping MultiKeys which is used in the eth_getProofsByBlockNumber RPC endpoint which is needed for the Fluffy state network bridge.
* Rename generateWitness flag to collectWitnessData to better describe what the flag does. We only collect the keys of the touched accounts and storage slots but no block witness generation is supported for now.
* Move remaining stateless code into nimbus directory.
* Add vmstate parameter to ChainRef to fix test.
* Exclude *.in from check copyright year
---------
Co-authored-by: jangko <jangko128@gmail.com>
* Remove exception from evm memory
* Remove exception from gas meter
* Remove exception from stack
* Remove exception from precompiles
* Remove exception from gas_costs
* Remove exception from op handlers
* Remove exception from op dispatcher
* Remove exception from call_evm
* Remove exception from EVM
* Fix tools and tests
* Remove exception from EVMC
* fix evmc
* Fix evmc
* Remove remnants of async evm stuff
* Remove superflous error handling
* Proc to func
* Fix errors detected by CI
* Fix EVM op call stack usage
* REmove exception handling from getVmState
* Better error message instead of just doAssert
* Remove unused validation
* Remove superflous catchRaise
* Use results.expect instead of unsafeValue
* CoreDb: Remove crufty second/off-site KVT
why:
Was used to allow late `Clique` to store directly to disk
* CoreDb: Remove prune flag related functionality
why:
Is completely legacy stuff
* CoreDb: Remove dependence on legacy API (tests unsupported yet)
why:
Does not fully support Aristo
* Re-factoring `state_db` using new API
details:
Only minimum changes needed to compile `nimbus`
* Update tests and aux modules
* Turn off legacy API and remove `distinct_tries`
comment:
The legacy API has now cruft status, will be removed soon
* Fix copyright years
* Update rpc for verified proxy
---------
Co-authored-by: Jacek Sieka <jacek@status.im>
* Fix `blobify()` for `SavedState` object
why:
Have to treat varying sizes for `HashKey`, i.p. for an empty key which
has zero size.
* Store correct block number in `SavedState` record
why:
Stored `block-number - 1` for some obscure reason.
* Cosmetcs, docu
`persist` is a hotspot when processing blocks because it is run at least
once per transaction and loops over the entire account cache every time.
Here, we introduce an extra `dirty` map that keeps track of all accounts
that need checking during `persist` which fixes the immediate
inefficiency, though probably this could benefit from a more thorough
review - we also get rid of the unused clearCache flag - we start with
a fresh cache on every fresh vmState.
* avoid unnecessary code hash comparisons
* avoid unnecessary copies when iterating
* use EMPTY_CODE_HASH throughout for code hash comparison
* Add persistent last state stamp feature
why:
This allows to run `CoreDb` without journal
* Start `CoreDb` without journal
* Remove journal related functions from `CoredDb`
why:
Typo. That worked the wrong way in the unit tests because the
tests always store the last item separately with extended
logging.
Co-authored-by: jordan <jordan@dry.pudding>
This PR extends the `nimbus import` command to also allow reading from
era files - this command allows creating or topping up an existing
database with data coming from era files instead of network sync.
* add `--era1-dir` and `--max-blocks` options to command line
* make `persistBlocks` report basic stats like transactions and gas
* improve error reporting in several API
* allow importing multiple RLP files in one go
* clean up logging options to match nimbus-eth2
* make sure database is closed properly on shutdown
andri lim
Jacek Sieka
Jordan Hrycaj
Kim De Mey
tersec
Barnabas Busa
web3-developer