134 lines
4.4 KiB
Nim
Raw Normal View History

# nimbus-eth1
aristo: fork support via layers/txframes (#2960) * aristo: fork support via layers/txframes This change reorganises how the database is accessed: instead holding a "current frame" in the database object, a dag of frames is created based on the "base frame" held in `AristoDbRef` and all database access happens through this frame, which can be thought of as a consistent point-in-time snapshot of the database based on a particular fork of the chain. In the code, "frame", "transaction" and "layer" is used to denote more or less the same thing: a dag of stacked changes backed by the on-disk database. Although this is not a requirement, in practice each frame holds the change set of a single block - as such, the frame and its ancestors leading up to the on-disk state represents the state of the database after that block has been applied. "committing" means merging the changes to its parent frame so that the difference between them is lost and only the cumulative changes remain - this facility enables frames to be combined arbitrarily wherever they are in the dag. In particular, it becomes possible to consolidate a set of changes near the base of the dag and commit those to disk without having to re-do the in-memory frames built on top of them - this is useful for "flattening" a set of changes during a base update and sending those to storage without having to perform a block replay on top. Looking at abstractions, a side effect of this change is that the KVT and Aristo are brought closer together by considering them to be part of the "same" atomic transaction set - the way the code gets organised, applying a block and saving it to the kvt happens in the same "logical" frame - therefore, discarding the frame discards both the aristo and kvt changes at the same time - likewise, they are persisted to disk together - this makes reasoning about the database somewhat easier but has the downside of increased memory usage, something that perhaps will need addressing in the future. Because the code reasons more strictly about frames and the state of the persisted database, it also makes it more visible where ForkedChain should be used and where it is still missing - in particular, frames represent a single branch of history while forkedchain manages multiple parallel forks - user-facing services such as the RPC should use the latter, ie until it has been finalized, a getBlock request should consider all forks and not just the blocks in the canonical head branch. Another advantage of this approach is that `AristoDbRef` conceptually becomes more simple - removing its tracking of the "current" transaction stack simplifies reasoning about what can go wrong since this state now has to be passed around in the form of `AristoTxRef` - as such, many of the tests and facilities in the code that were dealing with "stack inconsistency" are now structurally prevented from happening. The test suite will need significant refactoring after this change. Once this change has been merged, there are several follow-ups to do: * there's no mechanism for keeping frames up to date as they get committed or rolled back - TODO * naming is confused - many names for the same thing for legacy reason * forkedchain support is still missing in lots of code * clean up redundant logic based on previous designs - in particular the debug and introspection code no longer makes sense * the way change sets are stored will probably need revisiting - because it's a stack of changes where each frame must be interrogated to find an on-disk value, with a base distance of 128 we'll at minimum have to perform 128 frame lookups for *every* database interaction - regardless, the "dag-like" nature will stay * dispose and commit are poorly defined and perhaps redundant - in theory, one could simply let the GC collect abandoned frames etc, though it's likely an explicit mechanism will remain useful, so they stay for now More about the changes: * `AristoDbRef` gains a `txRef` field (todo: rename) that "more or less" corresponds to the old `balancer` field * `AristoDbRef.stack` is gone - instead, there's a chain of `AristoTxRef` objects that hold their respective "layer" which has the actual changes * No more reasoning about "top" and "stack" - instead, each `AristoTxRef` can be a "head" that "more or less" corresponds to the old single-history `top` notion and its stack * `level` still represents "distance to base" - it's computed from the parent chain instead of being stored * one has to be careful not to use frames where forkedchain was intended - layers are only for a single branch of history! * fix layer vtop after rollback * engine fix * Fix test_txpool * Fix test_rpc * Fix copyright year * fix simulator * Fix copyright year * Fix copyright year * Fix tracer * Fix infinite recursion bug * Remove aristo and kvt empty files * Fic copyright year * Fix fc chain_kvt * ForkedChain refactoring * Fix merge master conflict * Fix copyright year * Reparent txFrame * Fix test * Fix txFrame reparent again * Cleanup and fix test * UpdateBase bugfix and fix test * Fixe newPayload bug discovered by hive * Fix engine api fcu * Clean up call template, chain_kvt, andn txguid * Fix copyright year * work around base block loading issue * Add test * Fix updateHead bug * Fix updateBase bug * Change func commitBase to proc commitBase * Touch up and fix debug mode crash --------- Co-authored-by: jangko <jangko128@gmail.com>
2025-02-06 08:04:50 +01:00
# Copyright (c) 2023-2025 Status Research & Development GmbH
# Licensed under either of
# * Apache License, version 2.0, ([LICENSE-APACHE](LICENSE-APACHE) or
# http://www.apache.org/licenses/LICENSE-2.0)
# * MIT license ([LICENSE-MIT](LICENSE-MIT) or
# http://opensource.org/licenses/MIT)
# at your option. This file may not be copied, modified, or distributed
# except according to those terms.
{.push raises: [].}
import
2024-06-04 15:05:13 +00:00
std/[sequtils, sets, typetraits],
eth/common,
results,
".."/[aristo_desc, aristo_get, aristo_layers, aristo_serialise, aristo_utils]
# ------------------------------------------------------------------------------
# Public functions
# ------------------------------------------------------------------------------
proc checkTopStrict*(
aristo: fork support via layers/txframes (#2960) * aristo: fork support via layers/txframes This change reorganises how the database is accessed: instead holding a "current frame" in the database object, a dag of frames is created based on the "base frame" held in `AristoDbRef` and all database access happens through this frame, which can be thought of as a consistent point-in-time snapshot of the database based on a particular fork of the chain. In the code, "frame", "transaction" and "layer" is used to denote more or less the same thing: a dag of stacked changes backed by the on-disk database. Although this is not a requirement, in practice each frame holds the change set of a single block - as such, the frame and its ancestors leading up to the on-disk state represents the state of the database after that block has been applied. "committing" means merging the changes to its parent frame so that the difference between them is lost and only the cumulative changes remain - this facility enables frames to be combined arbitrarily wherever they are in the dag. In particular, it becomes possible to consolidate a set of changes near the base of the dag and commit those to disk without having to re-do the in-memory frames built on top of them - this is useful for "flattening" a set of changes during a base update and sending those to storage without having to perform a block replay on top. Looking at abstractions, a side effect of this change is that the KVT and Aristo are brought closer together by considering them to be part of the "same" atomic transaction set - the way the code gets organised, applying a block and saving it to the kvt happens in the same "logical" frame - therefore, discarding the frame discards both the aristo and kvt changes at the same time - likewise, they are persisted to disk together - this makes reasoning about the database somewhat easier but has the downside of increased memory usage, something that perhaps will need addressing in the future. Because the code reasons more strictly about frames and the state of the persisted database, it also makes it more visible where ForkedChain should be used and where it is still missing - in particular, frames represent a single branch of history while forkedchain manages multiple parallel forks - user-facing services such as the RPC should use the latter, ie until it has been finalized, a getBlock request should consider all forks and not just the blocks in the canonical head branch. Another advantage of this approach is that `AristoDbRef` conceptually becomes more simple - removing its tracking of the "current" transaction stack simplifies reasoning about what can go wrong since this state now has to be passed around in the form of `AristoTxRef` - as such, many of the tests and facilities in the code that were dealing with "stack inconsistency" are now structurally prevented from happening. The test suite will need significant refactoring after this change. Once this change has been merged, there are several follow-ups to do: * there's no mechanism for keeping frames up to date as they get committed or rolled back - TODO * naming is confused - many names for the same thing for legacy reason * forkedchain support is still missing in lots of code * clean up redundant logic based on previous designs - in particular the debug and introspection code no longer makes sense * the way change sets are stored will probably need revisiting - because it's a stack of changes where each frame must be interrogated to find an on-disk value, with a base distance of 128 we'll at minimum have to perform 128 frame lookups for *every* database interaction - regardless, the "dag-like" nature will stay * dispose and commit are poorly defined and perhaps redundant - in theory, one could simply let the GC collect abandoned frames etc, though it's likely an explicit mechanism will remain useful, so they stay for now More about the changes: * `AristoDbRef` gains a `txRef` field (todo: rename) that "more or less" corresponds to the old `balancer` field * `AristoDbRef.stack` is gone - instead, there's a chain of `AristoTxRef` objects that hold their respective "layer" which has the actual changes * No more reasoning about "top" and "stack" - instead, each `AristoTxRef` can be a "head" that "more or less" corresponds to the old single-history `top` notion and its stack * `level` still represents "distance to base" - it's computed from the parent chain instead of being stored * one has to be careful not to use frames where forkedchain was intended - layers are only for a single branch of history! * fix layer vtop after rollback * engine fix * Fix test_txpool * Fix test_rpc * Fix copyright year * fix simulator * Fix copyright year * Fix copyright year * Fix tracer * Fix infinite recursion bug * Remove aristo and kvt empty files * Fic copyright year * Fix fc chain_kvt * ForkedChain refactoring * Fix merge master conflict * Fix copyright year * Reparent txFrame * Fix test * Fix txFrame reparent again * Cleanup and fix test * UpdateBase bugfix and fix test * Fixe newPayload bug discovered by hive * Fix engine api fcu * Clean up call template, chain_kvt, andn txguid * Fix copyright year * work around base block loading issue * Add test * Fix updateHead bug * Fix updateBase bug * Change func commitBase to proc commitBase * Touch up and fix debug mode crash --------- Co-authored-by: jangko <jangko128@gmail.com>
2025-02-06 08:04:50 +01:00
db: AristoTxRef; # Database, top layer
): Result[void,(VertexID,AristoError)] =
Core db aristo hasher profiling and timing improvement (#1938) * Explicitly use shared `Kvt` table on `Ledger` and `Clique` lookup. why: Speeds up lookup time with `Aristo` backend. For writing `Clique` data, the `Companion` model allows to write `Clique` data past the database locked by evm transactions. * Implement `CoreDb` profiling with API tracking why: Chasing time spent per APT procs ... * Implement `Ledger` profiling with API tracking why: Chasing time spent per APT procs ... * Always hashify when commiting or storing why: A dirty cache makes no sense when committing * Make sure that a zero key is created when adding/updating vertices why: This is an error fix mainly for edge cases. A typical error was that the root key got deleted when there were only a few vertices left on the DB. * Need all created and changed vertices zero-keyed on the cache why: A zero key (i.e. empty Merkle hash) indicates that a vertex key needs to be updated. This would not be needed immediately after a merge as there is an actual leaf path on the cache layer. But after subsequent merge and delete operations this information might get blurred. * Re-org hashing algorithm why: Apart from errors, the previous implementation was too slow for two reasons: + some control hashes were calculated for debugging (now all verification is done in `aristo_check` module) + the leaf paths stored on the cache are used to build the labelling (aka hashing) schedule; there paths were accumulated over successive hash sessions although it is clear that all keys were generated, already
2023-12-12 17:47:41 +00:00
# No need to specify zero keys if implied by a leaf path with valid target
# vertex ID (i.e. not deleted).
var zeroKeys: HashSet[VertexID]
for (rvid,vtx) in db.layersWalkVtx:
let key = db.layersGetKeyOrVoid rvid
Core db aristo hasher profiling and timing improvement (#1938) * Explicitly use shared `Kvt` table on `Ledger` and `Clique` lookup. why: Speeds up lookup time with `Aristo` backend. For writing `Clique` data, the `Companion` model allows to write `Clique` data past the database locked by evm transactions. * Implement `CoreDb` profiling with API tracking why: Chasing time spent per APT procs ... * Implement `Ledger` profiling with API tracking why: Chasing time spent per APT procs ... * Always hashify when commiting or storing why: A dirty cache makes no sense when committing * Make sure that a zero key is created when adding/updating vertices why: This is an error fix mainly for edge cases. A typical error was that the root key got deleted when there were only a few vertices left on the DB. * Need all created and changed vertices zero-keyed on the cache why: A zero key (i.e. empty Merkle hash) indicates that a vertex key needs to be updated. This would not be needed immediately after a merge as there is an actual leaf path on the cache layer. But after subsequent merge and delete operations this information might get blurred. * Re-org hashing algorithm why: Apart from errors, the previous implementation was too slow for two reasons: + some control hashes were calculated for debugging (now all verification is done in `aristo_check` module) + the leaf paths stored on the cache are used to build the labelling (aka hashing) schedule; there paths were accumulated over successive hash sessions although it is clear that all keys were generated, already
2023-12-12 17:47:41 +00:00
if not vtx.isValid:
if key.isValid:
return err((rvid.vid,CheckStkVtxKeyMismatch))
Core db aristo hasher profiling and timing improvement (#1938) * Explicitly use shared `Kvt` table on `Ledger` and `Clique` lookup. why: Speeds up lookup time with `Aristo` backend. For writing `Clique` data, the `Companion` model allows to write `Clique` data past the database locked by evm transactions. * Implement `CoreDb` profiling with API tracking why: Chasing time spent per APT procs ... * Implement `Ledger` profiling with API tracking why: Chasing time spent per APT procs ... * Always hashify when commiting or storing why: A dirty cache makes no sense when committing * Make sure that a zero key is created when adding/updating vertices why: This is an error fix mainly for edge cases. A typical error was that the root key got deleted when there were only a few vertices left on the DB. * Need all created and changed vertices zero-keyed on the cache why: A zero key (i.e. empty Merkle hash) indicates that a vertex key needs to be updated. This would not be needed immediately after a merge as there is an actual leaf path on the cache layer. But after subsequent merge and delete operations this information might get blurred. * Re-org hashing algorithm why: Apart from errors, the previous implementation was too slow for two reasons: + some control hashes were calculated for debugging (now all verification is done in `aristo_check` module) + the leaf paths stored on the cache are used to build the labelling (aka hashing) schedule; there paths were accumulated over successive hash sessions although it is clear that all keys were generated, already
2023-12-12 17:47:41 +00:00
else: # Empty key flags key is for update
zeroKeys.incl rvid.vid
Core db aristo hasher profiling and timing improvement (#1938) * Explicitly use shared `Kvt` table on `Ledger` and `Clique` lookup. why: Speeds up lookup time with `Aristo` backend. For writing `Clique` data, the `Companion` model allows to write `Clique` data past the database locked by evm transactions. * Implement `CoreDb` profiling with API tracking why: Chasing time spent per APT procs ... * Implement `Ledger` profiling with API tracking why: Chasing time spent per APT procs ... * Always hashify when commiting or storing why: A dirty cache makes no sense when committing * Make sure that a zero key is created when adding/updating vertices why: This is an error fix mainly for edge cases. A typical error was that the root key got deleted when there were only a few vertices left on the DB. * Need all created and changed vertices zero-keyed on the cache why: A zero key (i.e. empty Merkle hash) indicates that a vertex key needs to be updated. This would not be needed immediately after a merge as there is an actual leaf path on the cache layer. But after subsequent merge and delete operations this information might get blurred. * Re-org hashing algorithm why: Apart from errors, the previous implementation was too slow for two reasons: + some control hashes were calculated for debugging (now all verification is done in `aristo_check` module) + the leaf paths stored on the cache are used to build the labelling (aka hashing) schedule; there paths were accumulated over successive hash sessions although it is clear that all keys were generated, already
2023-12-12 17:47:41 +00:00
elif key.isValid:
# So `vtx` and `key` exist
let node = vtx.toNode(rvid.root, db).valueOr:
No ext update (#2494) * Imported/rebase from `no-ext`, PR #2485 Store extension nodes together with the branch Extension nodes must be followed by a branch - as such, it makes sense to store the two together both in the database and in memory: * fewer reads, writes and updates to traverse the tree * simpler logic for maintaining the node structure * less space used, both memory and storage, because there are fewer nodes overall There is also a downside: hashes can no longer be cached for an extension - instead, only the extension+branch hash can be cached - this seems like a fine tradeoff since computing it should be fast. TODO: fix commented code * Fix merge functions and `toNode()` * Update `merkleSignCommit()` prototype why: Result is always a 32bit hash * Update short Merkle hash key generation details: Ethereum reference MPTs use Keccak hashes as node links if the size of an RLP encoded node is at least 32 bytes. Otherwise, the RLP encoded node value is used as a pseudo node link (rather than a hash.) This is specified in the yellow paper, appendix D. Different to the `Aristo` implementation, the reference MPT would not store such a node on the key-value database. Rather the RLP encoded node value is stored instead of a node link in a parent node is stored as a node link on the parent database. Only for the root hash, the top level node is always referred to by the hash. * Fix/update `Extension` sections why: Were commented out after removal of a dedicated `Extension` type which left the system disfunctional. * Clean up unused error codes * Update unit tests * Update docu --------- Co-authored-by: Jacek Sieka <jacek@status.im>
2024-07-16 19:47:59 +00:00
# not all sub-keys might be ready du to lazy hashing
continue
if key != node.digestTo(HashKey):
return err((rvid.vid,CheckStkVtxKeyMismatch))
Core db aristo hasher profiling and timing improvement (#1938) * Explicitly use shared `Kvt` table on `Ledger` and `Clique` lookup. why: Speeds up lookup time with `Aristo` backend. For writing `Clique` data, the `Companion` model allows to write `Clique` data past the database locked by evm transactions. * Implement `CoreDb` profiling with API tracking why: Chasing time spent per APT procs ... * Implement `Ledger` profiling with API tracking why: Chasing time spent per APT procs ... * Always hashify when commiting or storing why: A dirty cache makes no sense when committing * Make sure that a zero key is created when adding/updating vertices why: This is an error fix mainly for edge cases. A typical error was that the root key got deleted when there were only a few vertices left on the DB. * Need all created and changed vertices zero-keyed on the cache why: A zero key (i.e. empty Merkle hash) indicates that a vertex key needs to be updated. This would not be needed immediately after a merge as there is an actual leaf path on the cache layer. But after subsequent merge and delete operations this information might get blurred. * Re-org hashing algorithm why: Apart from errors, the previous implementation was too slow for two reasons: + some control hashes were calculated for debugging (now all verification is done in `aristo_check` module) + the leaf paths stored on the cache are used to build the labelling (aka hashing) schedule; there paths were accumulated over successive hash sessions although it is clear that all keys were generated, already
2023-12-12 17:47:41 +00:00
else: # Empty key flags key is for update
zeroKeys.incl rvid.vid
Core db aristo hasher profiling and timing improvement (#1938) * Explicitly use shared `Kvt` table on `Ledger` and `Clique` lookup. why: Speeds up lookup time with `Aristo` backend. For writing `Clique` data, the `Companion` model allows to write `Clique` data past the database locked by evm transactions. * Implement `CoreDb` profiling with API tracking why: Chasing time spent per APT procs ... * Implement `Ledger` profiling with API tracking why: Chasing time spent per APT procs ... * Always hashify when commiting or storing why: A dirty cache makes no sense when committing * Make sure that a zero key is created when adding/updating vertices why: This is an error fix mainly for edge cases. A typical error was that the root key got deleted when there were only a few vertices left on the DB. * Need all created and changed vertices zero-keyed on the cache why: A zero key (i.e. empty Merkle hash) indicates that a vertex key needs to be updated. This would not be needed immediately after a merge as there is an actual leaf path on the cache layer. But after subsequent merge and delete operations this information might get blurred. * Re-org hashing algorithm why: Apart from errors, the previous implementation was too slow for two reasons: + some control hashes were calculated for debugging (now all verification is done in `aristo_check` module) + the leaf paths stored on the cache are used to build the labelling (aka hashing) schedule; there paths were accumulated over successive hash sessions although it is clear that all keys were generated, already
2023-12-12 17:47:41 +00:00
for (rvid,key) in db.layersWalkKey:
if not key.isValid and rvid.vid notin zeroKeys:
if not db.getVtx(rvid).isValid:
return err((rvid.vid,CheckStkKeyStrayZeroEntry))
Core db aristo hasher profiling and timing improvement (#1938) * Explicitly use shared `Kvt` table on `Ledger` and `Clique` lookup. why: Speeds up lookup time with `Aristo` backend. For writing `Clique` data, the `Companion` model allows to write `Clique` data past the database locked by evm transactions. * Implement `CoreDb` profiling with API tracking why: Chasing time spent per APT procs ... * Implement `Ledger` profiling with API tracking why: Chasing time spent per APT procs ... * Always hashify when commiting or storing why: A dirty cache makes no sense when committing * Make sure that a zero key is created when adding/updating vertices why: This is an error fix mainly for edge cases. A typical error was that the root key got deleted when there were only a few vertices left on the DB. * Need all created and changed vertices zero-keyed on the cache why: A zero key (i.e. empty Merkle hash) indicates that a vertex key needs to be updated. This would not be needed immediately after a merge as there is an actual leaf path on the cache layer. But after subsequent merge and delete operations this information might get blurred. * Re-org hashing algorithm why: Apart from errors, the previous implementation was too slow for two reasons: + some control hashes were calculated for debugging (now all verification is done in `aristo_check` module) + the leaf paths stored on the cache are used to build the labelling (aka hashing) schedule; there paths were accumulated over successive hash sessions although it is clear that all keys were generated, already
2023-12-12 17:47:41 +00:00
ok()
Core db aristo hasher profiling and timing improvement (#1938) * Explicitly use shared `Kvt` table on `Ledger` and `Clique` lookup. why: Speeds up lookup time with `Aristo` backend. For writing `Clique` data, the `Companion` model allows to write `Clique` data past the database locked by evm transactions. * Implement `CoreDb` profiling with API tracking why: Chasing time spent per APT procs ... * Implement `Ledger` profiling with API tracking why: Chasing time spent per APT procs ... * Always hashify when commiting or storing why: A dirty cache makes no sense when committing * Make sure that a zero key is created when adding/updating vertices why: This is an error fix mainly for edge cases. A typical error was that the root key got deleted when there were only a few vertices left on the DB. * Need all created and changed vertices zero-keyed on the cache why: A zero key (i.e. empty Merkle hash) indicates that a vertex key needs to be updated. This would not be needed immediately after a merge as there is an actual leaf path on the cache layer. But after subsequent merge and delete operations this information might get blurred. * Re-org hashing algorithm why: Apart from errors, the previous implementation was too slow for two reasons: + some control hashes were calculated for debugging (now all verification is done in `aristo_check` module) + the leaf paths stored on the cache are used to build the labelling (aka hashing) schedule; there paths were accumulated over successive hash sessions although it is clear that all keys were generated, already
2023-12-12 17:47:41 +00:00
proc checkTopProofMode*(
aristo: fork support via layers/txframes (#2960) * aristo: fork support via layers/txframes This change reorganises how the database is accessed: instead holding a "current frame" in the database object, a dag of frames is created based on the "base frame" held in `AristoDbRef` and all database access happens through this frame, which can be thought of as a consistent point-in-time snapshot of the database based on a particular fork of the chain. In the code, "frame", "transaction" and "layer" is used to denote more or less the same thing: a dag of stacked changes backed by the on-disk database. Although this is not a requirement, in practice each frame holds the change set of a single block - as such, the frame and its ancestors leading up to the on-disk state represents the state of the database after that block has been applied. "committing" means merging the changes to its parent frame so that the difference between them is lost and only the cumulative changes remain - this facility enables frames to be combined arbitrarily wherever they are in the dag. In particular, it becomes possible to consolidate a set of changes near the base of the dag and commit those to disk without having to re-do the in-memory frames built on top of them - this is useful for "flattening" a set of changes during a base update and sending those to storage without having to perform a block replay on top. Looking at abstractions, a side effect of this change is that the KVT and Aristo are brought closer together by considering them to be part of the "same" atomic transaction set - the way the code gets organised, applying a block and saving it to the kvt happens in the same "logical" frame - therefore, discarding the frame discards both the aristo and kvt changes at the same time - likewise, they are persisted to disk together - this makes reasoning about the database somewhat easier but has the downside of increased memory usage, something that perhaps will need addressing in the future. Because the code reasons more strictly about frames and the state of the persisted database, it also makes it more visible where ForkedChain should be used and where it is still missing - in particular, frames represent a single branch of history while forkedchain manages multiple parallel forks - user-facing services such as the RPC should use the latter, ie until it has been finalized, a getBlock request should consider all forks and not just the blocks in the canonical head branch. Another advantage of this approach is that `AristoDbRef` conceptually becomes more simple - removing its tracking of the "current" transaction stack simplifies reasoning about what can go wrong since this state now has to be passed around in the form of `AristoTxRef` - as such, many of the tests and facilities in the code that were dealing with "stack inconsistency" are now structurally prevented from happening. The test suite will need significant refactoring after this change. Once this change has been merged, there are several follow-ups to do: * there's no mechanism for keeping frames up to date as they get committed or rolled back - TODO * naming is confused - many names for the same thing for legacy reason * forkedchain support is still missing in lots of code * clean up redundant logic based on previous designs - in particular the debug and introspection code no longer makes sense * the way change sets are stored will probably need revisiting - because it's a stack of changes where each frame must be interrogated to find an on-disk value, with a base distance of 128 we'll at minimum have to perform 128 frame lookups for *every* database interaction - regardless, the "dag-like" nature will stay * dispose and commit are poorly defined and perhaps redundant - in theory, one could simply let the GC collect abandoned frames etc, though it's likely an explicit mechanism will remain useful, so they stay for now More about the changes: * `AristoDbRef` gains a `txRef` field (todo: rename) that "more or less" corresponds to the old `balancer` field * `AristoDbRef.stack` is gone - instead, there's a chain of `AristoTxRef` objects that hold their respective "layer" which has the actual changes * No more reasoning about "top" and "stack" - instead, each `AristoTxRef` can be a "head" that "more or less" corresponds to the old single-history `top` notion and its stack * `level` still represents "distance to base" - it's computed from the parent chain instead of being stored * one has to be careful not to use frames where forkedchain was intended - layers are only for a single branch of history! * fix layer vtop after rollback * engine fix * Fix test_txpool * Fix test_rpc * Fix copyright year * fix simulator * Fix copyright year * Fix copyright year * Fix tracer * Fix infinite recursion bug * Remove aristo and kvt empty files * Fic copyright year * Fix fc chain_kvt * ForkedChain refactoring * Fix merge master conflict * Fix copyright year * Reparent txFrame * Fix test * Fix txFrame reparent again * Cleanup and fix test * UpdateBase bugfix and fix test * Fixe newPayload bug discovered by hive * Fix engine api fcu * Clean up call template, chain_kvt, andn txguid * Fix copyright year * work around base block loading issue * Add test * Fix updateHead bug * Fix updateBase bug * Change func commitBase to proc commitBase * Touch up and fix debug mode crash --------- Co-authored-by: jangko <jangko128@gmail.com>
2025-02-06 08:04:50 +01:00
db: AristoTxRef; # Database, top layer
): Result[void,(VertexID,AristoError)] =
for (rvid,key) in db.layersWalkKey:
if key.isValid: # Otherwise to be deleted
let vtx = db.getVtx rvid
if vtx.isValid:
let node = vtx.toNode(rvid.root, db).valueOr:
continue
if key != node.digestTo(HashKey):
return err((rvid.vid,CheckRlxVtxKeyMismatch))
ok()
proc checkTopCommon*(
aristo: fork support via layers/txframes (#2960) * aristo: fork support via layers/txframes This change reorganises how the database is accessed: instead holding a "current frame" in the database object, a dag of frames is created based on the "base frame" held in `AristoDbRef` and all database access happens through this frame, which can be thought of as a consistent point-in-time snapshot of the database based on a particular fork of the chain. In the code, "frame", "transaction" and "layer" is used to denote more or less the same thing: a dag of stacked changes backed by the on-disk database. Although this is not a requirement, in practice each frame holds the change set of a single block - as such, the frame and its ancestors leading up to the on-disk state represents the state of the database after that block has been applied. "committing" means merging the changes to its parent frame so that the difference between them is lost and only the cumulative changes remain - this facility enables frames to be combined arbitrarily wherever they are in the dag. In particular, it becomes possible to consolidate a set of changes near the base of the dag and commit those to disk without having to re-do the in-memory frames built on top of them - this is useful for "flattening" a set of changes during a base update and sending those to storage without having to perform a block replay on top. Looking at abstractions, a side effect of this change is that the KVT and Aristo are brought closer together by considering them to be part of the "same" atomic transaction set - the way the code gets organised, applying a block and saving it to the kvt happens in the same "logical" frame - therefore, discarding the frame discards both the aristo and kvt changes at the same time - likewise, they are persisted to disk together - this makes reasoning about the database somewhat easier but has the downside of increased memory usage, something that perhaps will need addressing in the future. Because the code reasons more strictly about frames and the state of the persisted database, it also makes it more visible where ForkedChain should be used and where it is still missing - in particular, frames represent a single branch of history while forkedchain manages multiple parallel forks - user-facing services such as the RPC should use the latter, ie until it has been finalized, a getBlock request should consider all forks and not just the blocks in the canonical head branch. Another advantage of this approach is that `AristoDbRef` conceptually becomes more simple - removing its tracking of the "current" transaction stack simplifies reasoning about what can go wrong since this state now has to be passed around in the form of `AristoTxRef` - as such, many of the tests and facilities in the code that were dealing with "stack inconsistency" are now structurally prevented from happening. The test suite will need significant refactoring after this change. Once this change has been merged, there are several follow-ups to do: * there's no mechanism for keeping frames up to date as they get committed or rolled back - TODO * naming is confused - many names for the same thing for legacy reason * forkedchain support is still missing in lots of code * clean up redundant logic based on previous designs - in particular the debug and introspection code no longer makes sense * the way change sets are stored will probably need revisiting - because it's a stack of changes where each frame must be interrogated to find an on-disk value, with a base distance of 128 we'll at minimum have to perform 128 frame lookups for *every* database interaction - regardless, the "dag-like" nature will stay * dispose and commit are poorly defined and perhaps redundant - in theory, one could simply let the GC collect abandoned frames etc, though it's likely an explicit mechanism will remain useful, so they stay for now More about the changes: * `AristoDbRef` gains a `txRef` field (todo: rename) that "more or less" corresponds to the old `balancer` field * `AristoDbRef.stack` is gone - instead, there's a chain of `AristoTxRef` objects that hold their respective "layer" which has the actual changes * No more reasoning about "top" and "stack" - instead, each `AristoTxRef` can be a "head" that "more or less" corresponds to the old single-history `top` notion and its stack * `level` still represents "distance to base" - it's computed from the parent chain instead of being stored * one has to be careful not to use frames where forkedchain was intended - layers are only for a single branch of history! * fix layer vtop after rollback * engine fix * Fix test_txpool * Fix test_rpc * Fix copyright year * fix simulator * Fix copyright year * Fix copyright year * Fix tracer * Fix infinite recursion bug * Remove aristo and kvt empty files * Fic copyright year * Fix fc chain_kvt * ForkedChain refactoring * Fix merge master conflict * Fix copyright year * Reparent txFrame * Fix test * Fix txFrame reparent again * Cleanup and fix test * UpdateBase bugfix and fix test * Fixe newPayload bug discovered by hive * Fix engine api fcu * Clean up call template, chain_kvt, andn txguid * Fix copyright year * work around base block loading issue * Add test * Fix updateHead bug * Fix updateBase bug * Change func commitBase to proc commitBase * Touch up and fix debug mode crash --------- Co-authored-by: jangko <jangko128@gmail.com>
2025-02-06 08:04:50 +01:00
db: AristoTxRef; # Database, top layer
): Result[void,(VertexID,AristoError)] =
# Some `kMap[]` entries may ne void indicating backend deletion
let
kMapCount = db.layersWalkKey.toSeq.mapIt(it[1]).filterIt(it.isValid).len
kMapNilCount = db.layersWalkKey.toSeq.len - kMapCount
vTop = db.vTop
Aristo avoid storage trie update race conditions (#2251) * Update TDD suite logger output format choices why: New format is not practical for TDD as it just dumps data across a wide range (considerably larder than 80 columns.) So the new format can be turned on by function argument. * Update unit tests samples configuration why: Slightly changed the way to find the `era1` directory * Remove compiler warnings (fix deprecated expressions and phrases) * Update `Aristo` debugging tools * Always update the `storageID` field of account leaf vertices why: Storage tries are weekly linked to an account leaf object in that the `storageID` field is updated by the application. Previously, `Aristo` verified that leaf objects make sense when passed to the database. As a consequence * the database was inconsistent for a short while * the burden for correctness was all on the application which led to delayed error handling which is hard to debug. So `Aristo` will internally update the account leaf objects so that there are no race conditions due to the storage trie handling * Aristo: Let `stow()`/`persist()` bail out unless there is a `VertexID(1)` why: The journal and filter logic depends on the hash of the `VertexID(1)` which is commonly known as the state root. This implies that all changes to the database are somehow related to that. * Make sure that a `Ledger` account does not overwrite the storage trie reference why: Due to the abstraction of a sub-trie (now referred to as column with a hash describing its state) there was a weakness in the `Aristo` handler where an account leaf could be overwritten though changing the validity of the database. This has been changed and the database will now reject such changes. This patch fixes the behaviour on the application layer. In particular, the column handle returned by the `CoreDb` needs to be updated by the `Aristo` database state. This mitigates the problem that a storage trie might have vanished or re-apperaed with a different vertex ID. * Fix sub-trie deletion test why: Was originally hinged on `VertexID(1)` which cannot be wholesale deleted anymore after the last Aristo update. Also, running with `VertexID(2)` needs an artificial `VertexID(1)` for making `stow()` or `persist()` work. * Cosmetics * Activate `test_generalstate_json` * Temporarily `deactivate test_tracer_json` * Fix copyright header --------- Co-authored-by: jordan <jordan@dry.pudding> Co-authored-by: Jacek Sieka <jacek@status.im>
2024-05-30 18:48:38 +01:00
var
2024-06-04 15:05:13 +00:00
topVid = VertexID(0)
Aristo avoid storage trie update race conditions (#2251) * Update TDD suite logger output format choices why: New format is not practical for TDD as it just dumps data across a wide range (considerably larder than 80 columns.) So the new format can be turned on by function argument. * Update unit tests samples configuration why: Slightly changed the way to find the `era1` directory * Remove compiler warnings (fix deprecated expressions and phrases) * Update `Aristo` debugging tools * Always update the `storageID` field of account leaf vertices why: Storage tries are weekly linked to an account leaf object in that the `storageID` field is updated by the application. Previously, `Aristo` verified that leaf objects make sense when passed to the database. As a consequence * the database was inconsistent for a short while * the burden for correctness was all on the application which led to delayed error handling which is hard to debug. So `Aristo` will internally update the account leaf objects so that there are no race conditions due to the storage trie handling * Aristo: Let `stow()`/`persist()` bail out unless there is a `VertexID(1)` why: The journal and filter logic depends on the hash of the `VertexID(1)` which is commonly known as the state root. This implies that all changes to the database are somehow related to that. * Make sure that a `Ledger` account does not overwrite the storage trie reference why: Due to the abstraction of a sub-trie (now referred to as column with a hash describing its state) there was a weakness in the `Aristo` handler where an account leaf could be overwritten though changing the validity of the database. This has been changed and the database will now reject such changes. This patch fixes the behaviour on the application layer. In particular, the column handle returned by the `CoreDb` needs to be updated by the `Aristo` database state. This mitigates the problem that a storage trie might have vanished or re-apperaed with a different vertex ID. * Fix sub-trie deletion test why: Was originally hinged on `VertexID(1)` which cannot be wholesale deleted anymore after the last Aristo update. Also, running with `VertexID(2)` needs an artificial `VertexID(1)` for making `stow()` or `persist()` work. * Cosmetics * Activate `test_generalstate_json` * Temporarily `deactivate test_tracer_json` * Fix copyright header --------- Co-authored-by: jordan <jordan@dry.pudding> Co-authored-by: Jacek Sieka <jacek@status.im>
2024-05-30 18:48:38 +01:00
stoRoots: HashSet[VertexID]
# Collect leafs and check deleted entries
Core db aristo hasher profiling and timing improvement (#1938) * Explicitly use shared `Kvt` table on `Ledger` and `Clique` lookup. why: Speeds up lookup time with `Aristo` backend. For writing `Clique` data, the `Companion` model allows to write `Clique` data past the database locked by evm transactions. * Implement `CoreDb` profiling with API tracking why: Chasing time spent per APT procs ... * Implement `Ledger` profiling with API tracking why: Chasing time spent per APT procs ... * Always hashify when commiting or storing why: A dirty cache makes no sense when committing * Make sure that a zero key is created when adding/updating vertices why: This is an error fix mainly for edge cases. A typical error was that the root key got deleted when there were only a few vertices left on the DB. * Need all created and changed vertices zero-keyed on the cache why: A zero key (i.e. empty Merkle hash) indicates that a vertex key needs to be updated. This would not be needed immediately after a merge as there is an actual leaf path on the cache layer. But after subsequent merge and delete operations this information might get blurred. * Re-org hashing algorithm why: Apart from errors, the previous implementation was too slow for two reasons: + some control hashes were calculated for debugging (now all verification is done in `aristo_check` module) + the leaf paths stored on the cache are used to build the labelling (aka hashing) schedule; there paths were accumulated over successive hash sessions although it is clear that all keys were generated, already
2023-12-12 17:47:41 +00:00
var nNilVtx = 0
for (rvid,vtx) in db.layersWalkVtx:
Aristo db update for short nodes key edge cases (#1887) * Aristo: Provide key-value list signature calculator detail: Simple wrappers around `Aristo` core functionality * Update new API for `CoreDb` details: + Renamed new API functions `contains()` => `hasKey()` or `hasPath()` which disables the `in` operator on non-boolean `contains()` functions + The functions `get()` and `fetch()` always return a not-found error if there is no item, available. The new functions `getOrEmpty()` and `mergeOrEmpty()` return an an empty `Blob` if there is no such key found. * Rewrite `core_apps.nim` using new API from `CoreDb` * Use `Aristo` functionality for calculating Merkle signatures details: For debugging, the `VerifyAristoForMerkleRootCalc` can be set so that `Aristo` results will be verified against the legacy versions. * Provide general interface for Merkle signing key-value tables details: Export `Aristo` wrappers * Activate `CoreDb` tests why: Now, API seems to be stable enough for general tests. * Update `toHex()` usage why: Byteutils' `toHex()` is superior to `toSeq.mapIt(it.toHex(2)).join` * Split `aristo_transcode` => `aristo_serialise` + `aristo_blobify` why: + Different modules for different purposes + `aristo_serialise`: RLP encoding/decoding + `aristo_blobify`: Aristo database encoding/decoding * Compacted representation of small nodes' links instead of Keccak hashes why: Ethereum MPTs use Keccak hashes as node links if the size of an RLP encoded node is at least 32 bytes. Otherwise, the RLP encoded node value is used as a pseudo node link (rather than a hash.) Such a node is nor stored on key-value database. Rather the RLP encoded node value is stored instead of a lode link in a parent node instead. Only for the root hash, the top level node is always referred to by the hash. This feature needed an abstraction of the `HashKey` object which is now either a hash or a blob of length at most 31 bytes. This leaves two ways of representing an empty/void `HashKey` type, either as an empty blob of zero length, or the hash of an empty blob. * Update `CoreDb` interface (mainly reducing logger noise) * Fix copyright years (to make `Lint` happy)
2023-11-08 12:18:32 +00:00
if vtx.isValid:
if topVid < rvid.vid:
topVid = rvid.vid
Aristo db update for short nodes key edge cases (#1887) * Aristo: Provide key-value list signature calculator detail: Simple wrappers around `Aristo` core functionality * Update new API for `CoreDb` details: + Renamed new API functions `contains()` => `hasKey()` or `hasPath()` which disables the `in` operator on non-boolean `contains()` functions + The functions `get()` and `fetch()` always return a not-found error if there is no item, available. The new functions `getOrEmpty()` and `mergeOrEmpty()` return an an empty `Blob` if there is no such key found. * Rewrite `core_apps.nim` using new API from `CoreDb` * Use `Aristo` functionality for calculating Merkle signatures details: For debugging, the `VerifyAristoForMerkleRootCalc` can be set so that `Aristo` results will be verified against the legacy versions. * Provide general interface for Merkle signing key-value tables details: Export `Aristo` wrappers * Activate `CoreDb` tests why: Now, API seems to be stable enough for general tests. * Update `toHex()` usage why: Byteutils' `toHex()` is superior to `toSeq.mapIt(it.toHex(2)).join` * Split `aristo_transcode` => `aristo_serialise` + `aristo_blobify` why: + Different modules for different purposes + `aristo_serialise`: RLP encoding/decoding + `aristo_blobify`: Aristo database encoding/decoding * Compacted representation of small nodes' links instead of Keccak hashes why: Ethereum MPTs use Keccak hashes as node links if the size of an RLP encoded node is at least 32 bytes. Otherwise, the RLP encoded node value is used as a pseudo node link (rather than a hash.) Such a node is nor stored on key-value database. Rather the RLP encoded node value is stored instead of a lode link in a parent node instead. Only for the root hash, the top level node is always referred to by the hash. This feature needed an abstraction of the `HashKey` object which is now either a hash or a blob of length at most 31 bytes. This leaves two ways of representing an empty/void `HashKey` type, either as an empty blob of zero length, or the hash of an empty blob. * Update `CoreDb` interface (mainly reducing logger noise) * Fix copyright years (to make `Lint` happy)
2023-11-08 12:18:32 +00:00
case vtx.vType:
of Leaf:
Aristo avoid storage trie update race conditions (#2251) * Update TDD suite logger output format choices why: New format is not practical for TDD as it just dumps data across a wide range (considerably larder than 80 columns.) So the new format can be turned on by function argument. * Update unit tests samples configuration why: Slightly changed the way to find the `era1` directory * Remove compiler warnings (fix deprecated expressions and phrases) * Update `Aristo` debugging tools * Always update the `storageID` field of account leaf vertices why: Storage tries are weekly linked to an account leaf object in that the `storageID` field is updated by the application. Previously, `Aristo` verified that leaf objects make sense when passed to the database. As a consequence * the database was inconsistent for a short while * the burden for correctness was all on the application which led to delayed error handling which is hard to debug. So `Aristo` will internally update the account leaf objects so that there are no race conditions due to the storage trie handling * Aristo: Let `stow()`/`persist()` bail out unless there is a `VertexID(1)` why: The journal and filter logic depends on the hash of the `VertexID(1)` which is commonly known as the state root. This implies that all changes to the database are somehow related to that. * Make sure that a `Ledger` account does not overwrite the storage trie reference why: Due to the abstraction of a sub-trie (now referred to as column with a hash describing its state) there was a weakness in the `Aristo` handler where an account leaf could be overwritten though changing the validity of the database. This has been changed and the database will now reject such changes. This patch fixes the behaviour on the application layer. In particular, the column handle returned by the `CoreDb` needs to be updated by the `Aristo` database state. This mitigates the problem that a storage trie might have vanished or re-apperaed with a different vertex ID. * Fix sub-trie deletion test why: Was originally hinged on `VertexID(1)` which cannot be wholesale deleted anymore after the last Aristo update. Also, running with `VertexID(2)` needs an artificial `VertexID(1)` for making `stow()` or `persist()` work. * Cosmetics * Activate `test_generalstate_json` * Temporarily `deactivate test_tracer_json` * Fix copyright header --------- Co-authored-by: jordan <jordan@dry.pudding> Co-authored-by: Jacek Sieka <jacek@status.im>
2024-05-30 18:48:38 +01:00
if vtx.lData.pType == AccountData:
let stoID = vtx.lData.stoID
if stoID.isValid:
let stoVid = stoID.vid
Aristo avoid storage trie update race conditions (#2251) * Update TDD suite logger output format choices why: New format is not practical for TDD as it just dumps data across a wide range (considerably larder than 80 columns.) So the new format can be turned on by function argument. * Update unit tests samples configuration why: Slightly changed the way to find the `era1` directory * Remove compiler warnings (fix deprecated expressions and phrases) * Update `Aristo` debugging tools * Always update the `storageID` field of account leaf vertices why: Storage tries are weekly linked to an account leaf object in that the `storageID` field is updated by the application. Previously, `Aristo` verified that leaf objects make sense when passed to the database. As a consequence * the database was inconsistent for a short while * the burden for correctness was all on the application which led to delayed error handling which is hard to debug. So `Aristo` will internally update the account leaf objects so that there are no race conditions due to the storage trie handling * Aristo: Let `stow()`/`persist()` bail out unless there is a `VertexID(1)` why: The journal and filter logic depends on the hash of the `VertexID(1)` which is commonly known as the state root. This implies that all changes to the database are somehow related to that. * Make sure that a `Ledger` account does not overwrite the storage trie reference why: Due to the abstraction of a sub-trie (now referred to as column with a hash describing its state) there was a weakness in the `Aristo` handler where an account leaf could be overwritten though changing the validity of the database. This has been changed and the database will now reject such changes. This patch fixes the behaviour on the application layer. In particular, the column handle returned by the `CoreDb` needs to be updated by the `Aristo` database state. This mitigates the problem that a storage trie might have vanished or re-apperaed with a different vertex ID. * Fix sub-trie deletion test why: Was originally hinged on `VertexID(1)` which cannot be wholesale deleted anymore after the last Aristo update. Also, running with `VertexID(2)` needs an artificial `VertexID(1)` for making `stow()` or `persist()` work. * Cosmetics * Activate `test_generalstate_json` * Temporarily `deactivate test_tracer_json` * Fix copyright header --------- Co-authored-by: jordan <jordan@dry.pudding> Co-authored-by: Jacek Sieka <jacek@status.im>
2024-05-30 18:48:38 +01:00
if stoVid in stoRoots:
return err((stoVid,CheckAnyVidSharedStorageRoot))
2024-06-04 15:05:13 +00:00
if vTop < stoVid:
Aristo avoid storage trie update race conditions (#2251) * Update TDD suite logger output format choices why: New format is not practical for TDD as it just dumps data across a wide range (considerably larder than 80 columns.) So the new format can be turned on by function argument. * Update unit tests samples configuration why: Slightly changed the way to find the `era1` directory * Remove compiler warnings (fix deprecated expressions and phrases) * Update `Aristo` debugging tools * Always update the `storageID` field of account leaf vertices why: Storage tries are weekly linked to an account leaf object in that the `storageID` field is updated by the application. Previously, `Aristo` verified that leaf objects make sense when passed to the database. As a consequence * the database was inconsistent for a short while * the burden for correctness was all on the application which led to delayed error handling which is hard to debug. So `Aristo` will internally update the account leaf objects so that there are no race conditions due to the storage trie handling * Aristo: Let `stow()`/`persist()` bail out unless there is a `VertexID(1)` why: The journal and filter logic depends on the hash of the `VertexID(1)` which is commonly known as the state root. This implies that all changes to the database are somehow related to that. * Make sure that a `Ledger` account does not overwrite the storage trie reference why: Due to the abstraction of a sub-trie (now referred to as column with a hash describing its state) there was a weakness in the `Aristo` handler where an account leaf could be overwritten though changing the validity of the database. This has been changed and the database will now reject such changes. This patch fixes the behaviour on the application layer. In particular, the column handle returned by the `CoreDb` needs to be updated by the `Aristo` database state. This mitigates the problem that a storage trie might have vanished or re-apperaed with a different vertex ID. * Fix sub-trie deletion test why: Was originally hinged on `VertexID(1)` which cannot be wholesale deleted anymore after the last Aristo update. Also, running with `VertexID(2)` needs an artificial `VertexID(1)` for making `stow()` or `persist()` work. * Cosmetics * Activate `test_generalstate_json` * Temporarily `deactivate test_tracer_json` * Fix copyright header --------- Co-authored-by: jordan <jordan@dry.pudding> Co-authored-by: Jacek Sieka <jacek@status.im>
2024-05-30 18:48:38 +01:00
return err((stoVid,CheckAnyVidDeadStorageRoot))
stoRoots.incl stoVid
Aristo db update for short nodes key edge cases (#1887) * Aristo: Provide key-value list signature calculator detail: Simple wrappers around `Aristo` core functionality * Update new API for `CoreDb` details: + Renamed new API functions `contains()` => `hasKey()` or `hasPath()` which disables the `in` operator on non-boolean `contains()` functions + The functions `get()` and `fetch()` always return a not-found error if there is no item, available. The new functions `getOrEmpty()` and `mergeOrEmpty()` return an an empty `Blob` if there is no such key found. * Rewrite `core_apps.nim` using new API from `CoreDb` * Use `Aristo` functionality for calculating Merkle signatures details: For debugging, the `VerifyAristoForMerkleRootCalc` can be set so that `Aristo` results will be verified against the legacy versions. * Provide general interface for Merkle signing key-value tables details: Export `Aristo` wrappers * Activate `CoreDb` tests why: Now, API seems to be stable enough for general tests. * Update `toHex()` usage why: Byteutils' `toHex()` is superior to `toSeq.mapIt(it.toHex(2)).join` * Split `aristo_transcode` => `aristo_serialise` + `aristo_blobify` why: + Different modules for different purposes + `aristo_serialise`: RLP encoding/decoding + `aristo_blobify`: Aristo database encoding/decoding * Compacted representation of small nodes' links instead of Keccak hashes why: Ethereum MPTs use Keccak hashes as node links if the size of an RLP encoded node is at least 32 bytes. Otherwise, the RLP encoded node value is used as a pseudo node link (rather than a hash.) Such a node is nor stored on key-value database. Rather the RLP encoded node value is stored instead of a lode link in a parent node instead. Only for the root hash, the top level node is always referred to by the hash. This feature needed an abstraction of the `HashKey` object which is now either a hash or a blob of length at most 31 bytes. This leaves two ways of representing an empty/void `HashKey` type, either as an empty blob of zero length, or the hash of an empty blob. * Update `CoreDb` interface (mainly reducing logger noise) * Fix copyright years (to make `Lint` happy)
2023-11-08 12:18:32 +00:00
of Branch:
block check42Links:
var seen = false
Pre-allocate vids for branches (#2882) Each branch node may have up to 16 sub-items - currently, these are given VertexID based when they are first needed leading to a mostly-random order of vertexid for each subitem. Here, we pre-allocate all 16 vertex ids such that when a branch subitem is filled, it already has a vertexid waiting for it. This brings several important benefits: * subitems are sorted and "close" in their id sequencing - this means that when rocksdb stores them, they are likely to end up in the same data block thus improving read efficiency * because the ids are consequtive, we can store just the starting id and a bitmap representing which subitems are in use - this reduces disk space usage for branches allowing more of them fit into a single disk read, further improving disk read and caching performance - disk usage at block 18M is down from 84 to 78gb! * the in-memory footprint of VertexRef reduced allowing more instances to fit into caches and less memory to be used overall. Because of the increased locality of reference, it turns out that we no longer need to iterate over the entire database to efficiently generate the hash key database because the normal computation is now faster - this significantly benefits "live" chain processing as well where each dirtied key must be accompanied by a read of all branch subitems next to it - most of the performance benefit in this branch comes from this locality-of-reference improvement. On a sample resync, there's already ~20% improvement with later blocks seeing increasing benefit (because the trie is deeper in later blocks leading to more benefit from branch read perf improvements) ``` blocks: 18729664, baseline: 190h43m49s, contender: 153h59m0s Time (total): -36h44m48s, -19.27% ``` Note: clients need to be resynced as the PR changes the on-disk format R.I.P. little bloom filter - your life in the repo was short but valuable
2024-12-04 11:42:04 +01:00
for _, _ in vtx.pairs():
if seen:
break check42Links
seen = true
return err((rvid.vid,CheckAnyVtxBranchLinksMissing))
Aristo db update for short nodes key edge cases (#1887) * Aristo: Provide key-value list signature calculator detail: Simple wrappers around `Aristo` core functionality * Update new API for `CoreDb` details: + Renamed new API functions `contains()` => `hasKey()` or `hasPath()` which disables the `in` operator on non-boolean `contains()` functions + The functions `get()` and `fetch()` always return a not-found error if there is no item, available. The new functions `getOrEmpty()` and `mergeOrEmpty()` return an an empty `Blob` if there is no such key found. * Rewrite `core_apps.nim` using new API from `CoreDb` * Use `Aristo` functionality for calculating Merkle signatures details: For debugging, the `VerifyAristoForMerkleRootCalc` can be set so that `Aristo` results will be verified against the legacy versions. * Provide general interface for Merkle signing key-value tables details: Export `Aristo` wrappers * Activate `CoreDb` tests why: Now, API seems to be stable enough for general tests. * Update `toHex()` usage why: Byteutils' `toHex()` is superior to `toSeq.mapIt(it.toHex(2)).join` * Split `aristo_transcode` => `aristo_serialise` + `aristo_blobify` why: + Different modules for different purposes + `aristo_serialise`: RLP encoding/decoding + `aristo_blobify`: Aristo database encoding/decoding * Compacted representation of small nodes' links instead of Keccak hashes why: Ethereum MPTs use Keccak hashes as node links if the size of an RLP encoded node is at least 32 bytes. Otherwise, the RLP encoded node value is used as a pseudo node link (rather than a hash.) Such a node is nor stored on key-value database. Rather the RLP encoded node value is stored instead of a lode link in a parent node instead. Only for the root hash, the top level node is always referred to by the hash. This feature needed an abstraction of the `HashKey` object which is now either a hash or a blob of length at most 31 bytes. This leaves two ways of representing an empty/void `HashKey` type, either as an empty blob of zero length, or the hash of an empty blob. * Update `CoreDb` interface (mainly reducing logger noise) * Fix copyright years (to make `Lint` happy)
2023-11-08 12:18:32 +00:00
else:
nNilVtx.inc
let rc = db.layersGetKey rvid
if rc.isErr:
return err((rvid.vid,CheckAnyVtxEmptyKeyMissing))
if rc.value[0].isValid:
return err((rvid.vid,CheckAnyVtxEmptyKeyExpected))
2024-06-04 15:05:13 +00:00
if vTop.distinctBase < LEAST_FREE_VID:
# Verify that all vids are below `LEAST_FREE_VID`
if topVid.distinctBase < LEAST_FREE_VID:
for (rvid,key) in db.layersWalkKey:
if key.isValid and LEAST_FREE_VID <= rvid.vid.distinctBase:
2024-06-04 15:05:13 +00:00
return err((topVid,CheckAnyVTopUnset))
# If present, there are at least as many deleted hashes as there are deleted
# vertices.
if kMapNilCount != 0 and kMapNilCount < nNilVtx:
return err((VertexID(0),CheckAnyVtxEmptyKeyMismatch))
ok()
# ------------------------------------------------------------------------------
# End
# ------------------------------------------------------------------------------