nimbus-eth1/nimbus/core/executor/process_block.nim

231 lines
7.9 KiB
Nim
Raw Normal View History

Feature/goerli replay clique poa (#743) * extract unused clique/mining support into separate file why: mining is currently unsupported by nimbus * Replay first 51840 transactions from Goerli block chain why: Currently Goerli is loaded but the block headers are not verified. Replaying allows real data PoA development. details: Simple stupid gzipped dump/undump layer for debugging based on the zlib module (no nim-faststream support.) This is a replay running against p2p/chain.persistBlocks() where the data were captured from. * prepare stubs for PoA engine * split executor source into sup-modules why: make room for updates, clique integration should go into executor/update_poastate.nim * Simplify p2p/executor.processBlock() function prototype why: vmState argument always wraps basicChainDB * split processBlock() into sub-functions why: isolate the part where it will support clique/poa * provided additional processTransaction() function prototype without _fork_ argument why: with the exception of some tests, the _fork_ argument is always derived from the other prototype argument _vmState_ details: similar situation with makeReceipt() * provide new processBlock() version explicitly supporting PoA details: The new processBlock() version supporting PoA is the general one also supporting non-PoA networks, it needs an additional _Clique_ descriptor function argument for PoA state (if any.) The old processBlock() function without the _Clique_ descriptor argument retorns an error on PoA networgs (e.g. Goerli.) * re-implemented Clique descriptor as _ref object_ why: gives more flexibility when moving around the descriptor object details: also cleaned up a bit the clique sources * comments for clarifying handling of Clique/PoA state descriptor
2021-07-06 13:14:45 +00:00
# Nimbus
# Copyright (c) 2018-2024 Status Research & Development GmbH
Feature/goerli replay clique poa (#743) * extract unused clique/mining support into separate file why: mining is currently unsupported by nimbus * Replay first 51840 transactions from Goerli block chain why: Currently Goerli is loaded but the block headers are not verified. Replaying allows real data PoA development. details: Simple stupid gzipped dump/undump layer for debugging based on the zlib module (no nim-faststream support.) This is a replay running against p2p/chain.persistBlocks() where the data were captured from. * prepare stubs for PoA engine * split executor source into sup-modules why: make room for updates, clique integration should go into executor/update_poastate.nim * Simplify p2p/executor.processBlock() function prototype why: vmState argument always wraps basicChainDB * split processBlock() into sub-functions why: isolate the part where it will support clique/poa * provided additional processTransaction() function prototype without _fork_ argument why: with the exception of some tests, the _fork_ argument is always derived from the other prototype argument _vmState_ details: similar situation with makeReceipt() * provide new processBlock() version explicitly supporting PoA details: The new processBlock() version supporting PoA is the general one also supporting non-PoA networks, it needs an additional _Clique_ descriptor function argument for PoA state (if any.) The old processBlock() function without the _Clique_ descriptor argument retorns an error on PoA networgs (e.g. Goerli.) * re-implemented Clique descriptor as _ref object_ why: gives more flexibility when moving around the descriptor object details: also cleaned up a bit the clique sources * comments for clarifying handling of Clique/PoA state descriptor
2021-07-06 13:14:45 +00:00
# Licensed under either of
# * Apache License, version 2.0, ([LICENSE-APACHE](LICENSE-APACHE) or
# http://www.apache.org/licenses/LICENSE-2.0)
# * MIT license ([LICENSE-MIT](LICENSE-MIT) or
# http://opensource.org/licenses/MIT)
# at your option. This file may not be copied, modified, or distributed except
# according to those terms.
import
2022-12-02 04:35:41 +00:00
../../common/common,
../../utils/utils,
Feature/goerli replay clique poa (#743) * extract unused clique/mining support into separate file why: mining is currently unsupported by nimbus * Replay first 51840 transactions from Goerli block chain why: Currently Goerli is loaded but the block headers are not verified. Replaying allows real data PoA development. details: Simple stupid gzipped dump/undump layer for debugging based on the zlib module (no nim-faststream support.) This is a replay running against p2p/chain.persistBlocks() where the data were captured from. * prepare stubs for PoA engine * split executor source into sup-modules why: make room for updates, clique integration should go into executor/update_poastate.nim * Simplify p2p/executor.processBlock() function prototype why: vmState argument always wraps basicChainDB * split processBlock() into sub-functions why: isolate the part where it will support clique/poa * provided additional processTransaction() function prototype without _fork_ argument why: with the exception of some tests, the _fork_ argument is always derived from the other prototype argument _vmState_ details: similar situation with makeReceipt() * provide new processBlock() version explicitly supporting PoA details: The new processBlock() version supporting PoA is the general one also supporting non-PoA networks, it needs an additional _Clique_ descriptor function argument for PoA state (if any.) The old processBlock() function without the _Clique_ descriptor argument retorns an error on PoA networgs (e.g. Goerli.) * re-implemented Clique descriptor as _ref object_ why: gives more flexibility when moving around the descriptor object details: also cleaned up a bit the clique sources * comments for clarifying handling of Clique/PoA state descriptor
2021-07-06 13:14:45 +00:00
../../constants,
../../db/ledger,
Feature/goerli replay clique poa (#743) * extract unused clique/mining support into separate file why: mining is currently unsupported by nimbus * Replay first 51840 transactions from Goerli block chain why: Currently Goerli is loaded but the block headers are not verified. Replaying allows real data PoA development. details: Simple stupid gzipped dump/undump layer for debugging based on the zlib module (no nim-faststream support.) This is a replay running against p2p/chain.persistBlocks() where the data were captured from. * prepare stubs for PoA engine * split executor source into sup-modules why: make room for updates, clique integration should go into executor/update_poastate.nim * Simplify p2p/executor.processBlock() function prototype why: vmState argument always wraps basicChainDB * split processBlock() into sub-functions why: isolate the part where it will support clique/poa * provided additional processTransaction() function prototype without _fork_ argument why: with the exception of some tests, the _fork_ argument is always derived from the other prototype argument _vmState_ details: similar situation with makeReceipt() * provide new processBlock() version explicitly supporting PoA details: The new processBlock() version supporting PoA is the general one also supporting non-PoA networks, it needs an additional _Clique_ descriptor function argument for PoA state (if any.) The old processBlock() function without the _Clique_ descriptor argument retorns an error on PoA networgs (e.g. Goerli.) * re-implemented Clique descriptor as _ref object_ why: gives more flexibility when moving around the descriptor object details: also cleaned up a bit the clique sources * comments for clarifying handling of Clique/PoA state descriptor
2021-07-06 13:14:45 +00:00
../../transaction,
../../evm/state,
../../evm/types,
Feature/goerli replay clique poa (#743) * extract unused clique/mining support into separate file why: mining is currently unsupported by nimbus * Replay first 51840 transactions from Goerli block chain why: Currently Goerli is loaded but the block headers are not verified. Replaying allows real data PoA development. details: Simple stupid gzipped dump/undump layer for debugging based on the zlib module (no nim-faststream support.) This is a replay running against p2p/chain.persistBlocks() where the data were captured from. * prepare stubs for PoA engine * split executor source into sup-modules why: make room for updates, clique integration should go into executor/update_poastate.nim * Simplify p2p/executor.processBlock() function prototype why: vmState argument always wraps basicChainDB * split processBlock() into sub-functions why: isolate the part where it will support clique/poa * provided additional processTransaction() function prototype without _fork_ argument why: with the exception of some tests, the _fork_ argument is always derived from the other prototype argument _vmState_ details: similar situation with makeReceipt() * provide new processBlock() version explicitly supporting PoA details: The new processBlock() version supporting PoA is the general one also supporting non-PoA networks, it needs an additional _Clique_ descriptor function argument for PoA state (if any.) The old processBlock() function without the _Clique_ descriptor argument retorns an error on PoA networgs (e.g. Goerli.) * re-implemented Clique descriptor as _ref object_ why: gives more flexibility when moving around the descriptor object details: also cleaned up a bit the clique sources * comments for clarifying handling of Clique/PoA state descriptor
2021-07-06 13:14:45 +00:00
../dao,
../eip6110,
Feature/goerli replay clique poa (#743) * extract unused clique/mining support into separate file why: mining is currently unsupported by nimbus * Replay first 51840 transactions from Goerli block chain why: Currently Goerli is loaded but the block headers are not verified. Replaying allows real data PoA development. details: Simple stupid gzipped dump/undump layer for debugging based on the zlib module (no nim-faststream support.) This is a replay running against p2p/chain.persistBlocks() where the data were captured from. * prepare stubs for PoA engine * split executor source into sup-modules why: make room for updates, clique integration should go into executor/update_poastate.nim * Simplify p2p/executor.processBlock() function prototype why: vmState argument always wraps basicChainDB * split processBlock() into sub-functions why: isolate the part where it will support clique/poa * provided additional processTransaction() function prototype without _fork_ argument why: with the exception of some tests, the _fork_ argument is always derived from the other prototype argument _vmState_ details: similar situation with makeReceipt() * provide new processBlock() version explicitly supporting PoA details: The new processBlock() version supporting PoA is the general one also supporting non-PoA networks, it needs an additional _Clique_ descriptor function argument for PoA state (if any.) The old processBlock() function without the _Clique_ descriptor argument retorns an error on PoA networgs (e.g. Goerli.) * re-implemented Clique descriptor as _ref object_ why: gives more flexibility when moving around the descriptor object details: also cleaned up a bit the clique sources * comments for clarifying handling of Clique/PoA state descriptor
2021-07-06 13:14:45 +00:00
./calculate_reward,
./executor_helpers,
./process_transaction,
eth/common/transaction_utils,
Feature/goerli replay clique poa (#743) * extract unused clique/mining support into separate file why: mining is currently unsupported by nimbus * Replay first 51840 transactions from Goerli block chain why: Currently Goerli is loaded but the block headers are not verified. Replaying allows real data PoA development. details: Simple stupid gzipped dump/undump layer for debugging based on the zlib module (no nim-faststream support.) This is a replay running against p2p/chain.persistBlocks() where the data were captured from. * prepare stubs for PoA engine * split executor source into sup-modules why: make room for updates, clique integration should go into executor/update_poastate.nim * Simplify p2p/executor.processBlock() function prototype why: vmState argument always wraps basicChainDB * split processBlock() into sub-functions why: isolate the part where it will support clique/poa * provided additional processTransaction() function prototype without _fork_ argument why: with the exception of some tests, the _fork_ argument is always derived from the other prototype argument _vmState_ details: similar situation with makeReceipt() * provide new processBlock() version explicitly supporting PoA details: The new processBlock() version supporting PoA is the general one also supporting non-PoA networks, it needs an additional _Clique_ descriptor function argument for PoA state (if any.) The old processBlock() function without the _Clique_ descriptor argument retorns an error on PoA networgs (e.g. Goerli.) * re-implemented Clique descriptor as _ref object_ why: gives more flexibility when moving around the descriptor object details: also cleaned up a bit the clique sources * comments for clarifying handling of Clique/PoA state descriptor
2021-07-06 13:14:45 +00:00
chronicles,
2024-05-30 12:54:03 +00:00
results
Feature/goerli replay clique poa (#743) * extract unused clique/mining support into separate file why: mining is currently unsupported by nimbus * Replay first 51840 transactions from Goerli block chain why: Currently Goerli is loaded but the block headers are not verified. Replaying allows real data PoA development. details: Simple stupid gzipped dump/undump layer for debugging based on the zlib module (no nim-faststream support.) This is a replay running against p2p/chain.persistBlocks() where the data were captured from. * prepare stubs for PoA engine * split executor source into sup-modules why: make room for updates, clique integration should go into executor/update_poastate.nim * Simplify p2p/executor.processBlock() function prototype why: vmState argument always wraps basicChainDB * split processBlock() into sub-functions why: isolate the part where it will support clique/poa * provided additional processTransaction() function prototype without _fork_ argument why: with the exception of some tests, the _fork_ argument is always derived from the other prototype argument _vmState_ details: similar situation with makeReceipt() * provide new processBlock() version explicitly supporting PoA details: The new processBlock() version supporting PoA is the general one also supporting non-PoA networks, it needs an additional _Clique_ descriptor function argument for PoA state (if any.) The old processBlock() function without the _Clique_ descriptor argument retorns an error on PoA networgs (e.g. Goerli.) * re-implemented Clique descriptor as _ref object_ why: gives more flexibility when moving around the descriptor object details: also cleaned up a bit the clique sources * comments for clarifying handling of Clique/PoA state descriptor
2021-07-06 13:14:45 +00:00
{.push raises: [].}
Feature/implement poa processing (#748) * re-shuffled Clique functions why: Due to the port from the go-sources, the interface logic is not optimal for nimbus. The main visible function is currently snapshot() and most of the _procurement_ of this function result has been moved to a sub-directory. * run eip-225 Clique test against p2p/chain.persistBlocks() why: Previously, loading the test block chains was fugdged with the purpose only to fill the database. As it is now clear how nimbus works on Goerli, the same can be achieved with a more realistic scenario. details: Eventually these tests will be pre-cursor to the reply tests for the Goerli chain supporting TDD approach with more simple cases. * fix exception annotations for executor module why: needed for exception tracking details: main annoyance are vmState methods (in state.nim) which potentially throw a base level Exception (a proc would only throws CatchableError) * split p2p/chain into sub-modules and fix exception annotations why: make space for implementing PoA stuff * provide over-loadable Clique PRNG why: There is a PRNG provided for generating reproducible number sequences. The functions which employ the PRNG to generate time slots were ported ported from the go-implementation. They are currently unused. * implement trusted signer assembly in p2p/chain.persistBlocks() details: * PoA processing moved there at the end of a transaction. Currently, there is no action (eg. transaction rollback) if this fails. * The unit tests with staged blocks work ok. In particular, there should be tests with to-be-rejected blocks. * TODO: 1.Optimise throughput/cache handling; 2.Verify headers * fix statement cast in pool.nim * added table features to LRU cache why: Clique uses the LRU cache using a mixture of volatile online items from the LRU cache and database checkpoints for hard synchronisation. For performance, Clique needs more table like features. details: First, last, and query key added, as well as efficient random delete added. Also key-item pair iterator added for debugging. * re-factored LRU snapshot caching why: Caching was sub-optimal (aka. bonkers) in that it skipped over memory caches in many cases and so mostly rebuild the snapshot from the last on-disk checkpoint. details; The LRU snapshot toValue() handler has been moved into the module clique_snapshot. This is for the fact that toValue() is not supposed to see the whole LRU cache database. So there must be a higher layer working with the the whole LRU cache and the on-disk checkpoint database. also: some clean up todo: The code still assumes that the block headers are valid in itself. This is particular important when an epoch header (aka re-sync header) is processed as it must contain the PoA result of all previous headers. So blocks need to be verified when they come in before used for PoA processing. * fix some snapshot cache fringe cases why: Must not index empty sequences in clique_snapshot module
2021-07-14 15:13:27 +00:00
# Factored this out of procBlkPreamble so that it can be used directly for
# stateless execution of specific transactions.
proc processTransactions*(
vmState: BaseVMState,
header: Header,
transactions: seq[Transaction],
skipReceipts = false,
collectLogs = false
): Result[void, string] =
vmState.receipts.setLen(if skipReceipts: 0 else: transactions.len)
vmState.cumulativeGasUsed = 0
vmState.allLogs = @[]
for txIndex, tx in transactions:
let sender = tx.recoverSender().valueOr:
return err("Could not get sender for tx with index " & $(txIndex))
let rc = vmState.processTransaction(tx, sender, header)
if rc.isErr:
return err("Error processing tx with index " & $(txIndex) & ":" & rc.error)
if skipReceipts:
# TODO don't generate logs at all if we're not going to put them in
# receipts
if collectLogs:
vmState.allLogs.add vmState.getAndClearLogEntries()
else:
discard vmState.getAndClearLogEntries()
else:
vmState.receipts[txIndex] = vmState.makeReceipt(tx.txType)
if collectLogs:
vmState.allLogs.add vmState.receipts[txIndex].logs
ok()
proc procBlkPreamble(
vmState: BaseVMState, blk: Block, skipValidation, skipReceipts, skipUncles: bool
): Result[void, string] =
template header(): Header =
blk.header
let com = vmState.com
if com.daoForkSupport and com.daoForkBlock.get == header.number:
Feature/goerli replay clique poa (#743) * extract unused clique/mining support into separate file why: mining is currently unsupported by nimbus * Replay first 51840 transactions from Goerli block chain why: Currently Goerli is loaded but the block headers are not verified. Replaying allows real data PoA development. details: Simple stupid gzipped dump/undump layer for debugging based on the zlib module (no nim-faststream support.) This is a replay running against p2p/chain.persistBlocks() where the data were captured from. * prepare stubs for PoA engine * split executor source into sup-modules why: make room for updates, clique integration should go into executor/update_poastate.nim * Simplify p2p/executor.processBlock() function prototype why: vmState argument always wraps basicChainDB * split processBlock() into sub-functions why: isolate the part where it will support clique/poa * provided additional processTransaction() function prototype without _fork_ argument why: with the exception of some tests, the _fork_ argument is always derived from the other prototype argument _vmState_ details: similar situation with makeReceipt() * provide new processBlock() version explicitly supporting PoA details: The new processBlock() version supporting PoA is the general one also supporting non-PoA networks, it needs an additional _Clique_ descriptor function argument for PoA state (if any.) The old processBlock() function without the _Clique_ descriptor argument retorns an error on PoA networgs (e.g. Goerli.) * re-implemented Clique descriptor as _ref object_ why: gives more flexibility when moving around the descriptor object details: also cleaned up a bit the clique sources * comments for clarifying handling of Clique/PoA state descriptor
2021-07-06 13:14:45 +00:00
vmState.mutateStateDB:
db.applyDAOHardFork()
if not skipValidation: # Expensive!
if blk.transactions.calcTxRoot != header.txRoot:
return err("Mismatched txRoot")
Feature/goerli replay clique poa (#743) * extract unused clique/mining support into separate file why: mining is currently unsupported by nimbus * Replay first 51840 transactions from Goerli block chain why: Currently Goerli is loaded but the block headers are not verified. Replaying allows real data PoA development. details: Simple stupid gzipped dump/undump layer for debugging based on the zlib module (no nim-faststream support.) This is a replay running against p2p/chain.persistBlocks() where the data were captured from. * prepare stubs for PoA engine * split executor source into sup-modules why: make room for updates, clique integration should go into executor/update_poastate.nim * Simplify p2p/executor.processBlock() function prototype why: vmState argument always wraps basicChainDB * split processBlock() into sub-functions why: isolate the part where it will support clique/poa * provided additional processTransaction() function prototype without _fork_ argument why: with the exception of some tests, the _fork_ argument is always derived from the other prototype argument _vmState_ details: similar situation with makeReceipt() * provide new processBlock() version explicitly supporting PoA details: The new processBlock() version supporting PoA is the general one also supporting non-PoA networks, it needs an additional _Clique_ descriptor function argument for PoA state (if any.) The old processBlock() function without the _Clique_ descriptor argument retorns an error on PoA networgs (e.g. Goerli.) * re-implemented Clique descriptor as _ref object_ why: gives more flexibility when moving around the descriptor object details: also cleaned up a bit the clique sources * comments for clarifying handling of Clique/PoA state descriptor
2021-07-06 13:14:45 +00:00
if com.isPragueOrLater(header.timestamp):
if header.requestsHash.isNone:
return err("Post-Prague block header must have requestsHash")
?vmState.processParentBlockHash(header.parentHash)
else:
if header.requestsHash.isSome:
return err("Pre-Prague block header must not have requestsHash")
if com.isCancunOrLater(header.timestamp):
if header.parentBeaconBlockRoot.isNone:
return err("Post-Cancun block header must have parentBeaconBlockRoot")
?vmState.processBeaconBlockRoot(header.parentBeaconBlockRoot.get)
else:
if header.parentBeaconBlockRoot.isSome:
return err("Pre-Cancun block header must not have parentBeaconBlockRoot")
if header.txRoot != EMPTY_ROOT_HASH:
Consolidate block type for block processing (#2325) This PR consolidates the split header-body sequences into a single EthBlock sequence and cleans up the fallout from that which significantly reduces block processing overhead during import thanks to less garbage collection and fewer copies of things all around. Notably, since the number of headers must always match the number of bodies, we also get rid of a pointless degree of freedom that in the future could introduce unnecessary bugs. * only read header and body from era file * avoid several unnecessary copies along the block processing way * simplify signatures, cleaning up unused arguemnts and returns * use `stew/assign2` in a few strategic places where the generated nim assignent is slow and add a few `move` to work around poor analysis in nim 1.6 (will need to be revisited for 2.0) ``` stats-20240607_2223-a814aa0b.csv vs stats-20240608_0714-21c1d0a9.csv bps_x bps_y tps_x tps_y bpsd tpsd timed block_number (498305, 713245] 1,540.52 1,809.73 2,361.58 2775.340189 17.63% 17.63% -14.92% (713245, 928185] 730.36 865.26 1,715.90 2028.973852 18.01% 18.01% -15.21% (928185, 1143126] 663.03 789.10 2,529.26 3032.490771 19.79% 19.79% -16.28% (1143126, 1358066] 393.46 508.05 2,152.50 2777.578119 29.13% 29.13% -22.50% (1358066, 1573007] 370.88 440.72 2,351.31 2791.896052 18.81% 18.81% -15.80% (1573007, 1787947] 283.65 335.11 2,068.93 2441.373402 17.60% 17.60% -14.91% (1787947, 2002888] 287.29 342.11 2,078.39 2474.179448 18.99% 18.99% -15.91% (2002888, 2217828] 293.38 343.16 2,208.83 2584.77457 17.16% 17.16% -14.61% (2217828, 2432769] 140.09 167.86 1,081.87 1296.336926 18.82% 18.82% -15.80% blocks: 1934464, baseline: 3h13m1s, contender: 2h43m47s bpsd (mean): 19.55% tpsd (mean): 19.55% Time (total): -29m13s, -15.14% ```
2024-06-09 14:32:20 +00:00
if blk.transactions.len == 0:
return err("Transactions missing from body")
let collectLogs = header.requestsHash.isSome and not skipValidation
?processTransactions(vmState, header, blk.transactions, skipReceipts, collectLogs)
elif blk.transactions.len > 0:
return err("Transactions in block with empty txRoot")
Feature/goerli replay clique poa (#743) * extract unused clique/mining support into separate file why: mining is currently unsupported by nimbus * Replay first 51840 transactions from Goerli block chain why: Currently Goerli is loaded but the block headers are not verified. Replaying allows real data PoA development. details: Simple stupid gzipped dump/undump layer for debugging based on the zlib module (no nim-faststream support.) This is a replay running against p2p/chain.persistBlocks() where the data were captured from. * prepare stubs for PoA engine * split executor source into sup-modules why: make room for updates, clique integration should go into executor/update_poastate.nim * Simplify p2p/executor.processBlock() function prototype why: vmState argument always wraps basicChainDB * split processBlock() into sub-functions why: isolate the part where it will support clique/poa * provided additional processTransaction() function prototype without _fork_ argument why: with the exception of some tests, the _fork_ argument is always derived from the other prototype argument _vmState_ details: similar situation with makeReceipt() * provide new processBlock() version explicitly supporting PoA details: The new processBlock() version supporting PoA is the general one also supporting non-PoA networks, it needs an additional _Clique_ descriptor function argument for PoA state (if any.) The old processBlock() function without the _Clique_ descriptor argument retorns an error on PoA networgs (e.g. Goerli.) * re-implemented Clique descriptor as _ref object_ why: gives more flexibility when moving around the descriptor object details: also cleaned up a bit the clique sources * comments for clarifying handling of Clique/PoA state descriptor
2021-07-06 13:14:45 +00:00
if com.isShanghaiOrLater(header.timestamp):
if header.withdrawalsRoot.isNone:
return err("Post-Shanghai block header must have withdrawalsRoot")
Consolidate block type for block processing (#2325) This PR consolidates the split header-body sequences into a single EthBlock sequence and cleans up the fallout from that which significantly reduces block processing overhead during import thanks to less garbage collection and fewer copies of things all around. Notably, since the number of headers must always match the number of bodies, we also get rid of a pointless degree of freedom that in the future could introduce unnecessary bugs. * only read header and body from era file * avoid several unnecessary copies along the block processing way * simplify signatures, cleaning up unused arguemnts and returns * use `stew/assign2` in a few strategic places where the generated nim assignent is slow and add a few `move` to work around poor analysis in nim 1.6 (will need to be revisited for 2.0) ``` stats-20240607_2223-a814aa0b.csv vs stats-20240608_0714-21c1d0a9.csv bps_x bps_y tps_x tps_y bpsd tpsd timed block_number (498305, 713245] 1,540.52 1,809.73 2,361.58 2775.340189 17.63% 17.63% -14.92% (713245, 928185] 730.36 865.26 1,715.90 2028.973852 18.01% 18.01% -15.21% (928185, 1143126] 663.03 789.10 2,529.26 3032.490771 19.79% 19.79% -16.28% (1143126, 1358066] 393.46 508.05 2,152.50 2777.578119 29.13% 29.13% -22.50% (1358066, 1573007] 370.88 440.72 2,351.31 2791.896052 18.81% 18.81% -15.80% (1573007, 1787947] 283.65 335.11 2,068.93 2441.373402 17.60% 17.60% -14.91% (1787947, 2002888] 287.29 342.11 2,078.39 2474.179448 18.99% 18.99% -15.91% (2002888, 2217828] 293.38 343.16 2,208.83 2584.77457 17.16% 17.16% -14.61% (2217828, 2432769] 140.09 167.86 1,081.87 1296.336926 18.82% 18.82% -15.80% blocks: 1934464, baseline: 3h13m1s, contender: 2h43m47s bpsd (mean): 19.55% tpsd (mean): 19.55% Time (total): -29m13s, -15.14% ```
2024-06-09 14:32:20 +00:00
if blk.withdrawals.isNone:
return err("Post-Shanghai block body must have withdrawals")
Consolidate block type for block processing (#2325) This PR consolidates the split header-body sequences into a single EthBlock sequence and cleans up the fallout from that which significantly reduces block processing overhead during import thanks to less garbage collection and fewer copies of things all around. Notably, since the number of headers must always match the number of bodies, we also get rid of a pointless degree of freedom that in the future could introduce unnecessary bugs. * only read header and body from era file * avoid several unnecessary copies along the block processing way * simplify signatures, cleaning up unused arguemnts and returns * use `stew/assign2` in a few strategic places where the generated nim assignent is slow and add a few `move` to work around poor analysis in nim 1.6 (will need to be revisited for 2.0) ``` stats-20240607_2223-a814aa0b.csv vs stats-20240608_0714-21c1d0a9.csv bps_x bps_y tps_x tps_y bpsd tpsd timed block_number (498305, 713245] 1,540.52 1,809.73 2,361.58 2775.340189 17.63% 17.63% -14.92% (713245, 928185] 730.36 865.26 1,715.90 2028.973852 18.01% 18.01% -15.21% (928185, 1143126] 663.03 789.10 2,529.26 3032.490771 19.79% 19.79% -16.28% (1143126, 1358066] 393.46 508.05 2,152.50 2777.578119 29.13% 29.13% -22.50% (1358066, 1573007] 370.88 440.72 2,351.31 2791.896052 18.81% 18.81% -15.80% (1573007, 1787947] 283.65 335.11 2,068.93 2441.373402 17.60% 17.60% -14.91% (1787947, 2002888] 287.29 342.11 2,078.39 2474.179448 18.99% 18.99% -15.91% (2002888, 2217828] 293.38 343.16 2,208.83 2584.77457 17.16% 17.16% -14.61% (2217828, 2432769] 140.09 167.86 1,081.87 1296.336926 18.82% 18.82% -15.80% blocks: 1934464, baseline: 3h13m1s, contender: 2h43m47s bpsd (mean): 19.55% tpsd (mean): 19.55% Time (total): -29m13s, -15.14% ```
2024-06-09 14:32:20 +00:00
for withdrawal in blk.withdrawals.get:
vmState.stateDB.addBalance(withdrawal.address, withdrawal.weiAmount)
else:
if header.withdrawalsRoot.isSome:
return err("Pre-Shanghai block header must not have withdrawalsRoot")
Consolidate block type for block processing (#2325) This PR consolidates the split header-body sequences into a single EthBlock sequence and cleans up the fallout from that which significantly reduces block processing overhead during import thanks to less garbage collection and fewer copies of things all around. Notably, since the number of headers must always match the number of bodies, we also get rid of a pointless degree of freedom that in the future could introduce unnecessary bugs. * only read header and body from era file * avoid several unnecessary copies along the block processing way * simplify signatures, cleaning up unused arguemnts and returns * use `stew/assign2` in a few strategic places where the generated nim assignent is slow and add a few `move` to work around poor analysis in nim 1.6 (will need to be revisited for 2.0) ``` stats-20240607_2223-a814aa0b.csv vs stats-20240608_0714-21c1d0a9.csv bps_x bps_y tps_x tps_y bpsd tpsd timed block_number (498305, 713245] 1,540.52 1,809.73 2,361.58 2775.340189 17.63% 17.63% -14.92% (713245, 928185] 730.36 865.26 1,715.90 2028.973852 18.01% 18.01% -15.21% (928185, 1143126] 663.03 789.10 2,529.26 3032.490771 19.79% 19.79% -16.28% (1143126, 1358066] 393.46 508.05 2,152.50 2777.578119 29.13% 29.13% -22.50% (1358066, 1573007] 370.88 440.72 2,351.31 2791.896052 18.81% 18.81% -15.80% (1573007, 1787947] 283.65 335.11 2,068.93 2441.373402 17.60% 17.60% -14.91% (1787947, 2002888] 287.29 342.11 2,078.39 2474.179448 18.99% 18.99% -15.91% (2002888, 2217828] 293.38 343.16 2,208.83 2584.77457 17.16% 17.16% -14.61% (2217828, 2432769] 140.09 167.86 1,081.87 1296.336926 18.82% 18.82% -15.80% blocks: 1934464, baseline: 3h13m1s, contender: 2h43m47s bpsd (mean): 19.55% tpsd (mean): 19.55% Time (total): -29m13s, -15.14% ```
2024-06-09 14:32:20 +00:00
if blk.withdrawals.isSome:
return err("Pre-Shanghai block body must not have withdrawals")
Feature/goerli replay clique poa (#743) * extract unused clique/mining support into separate file why: mining is currently unsupported by nimbus * Replay first 51840 transactions from Goerli block chain why: Currently Goerli is loaded but the block headers are not verified. Replaying allows real data PoA development. details: Simple stupid gzipped dump/undump layer for debugging based on the zlib module (no nim-faststream support.) This is a replay running against p2p/chain.persistBlocks() where the data were captured from. * prepare stubs for PoA engine * split executor source into sup-modules why: make room for updates, clique integration should go into executor/update_poastate.nim * Simplify p2p/executor.processBlock() function prototype why: vmState argument always wraps basicChainDB * split processBlock() into sub-functions why: isolate the part where it will support clique/poa * provided additional processTransaction() function prototype without _fork_ argument why: with the exception of some tests, the _fork_ argument is always derived from the other prototype argument _vmState_ details: similar situation with makeReceipt() * provide new processBlock() version explicitly supporting PoA details: The new processBlock() version supporting PoA is the general one also supporting non-PoA networks, it needs an additional _Clique_ descriptor function argument for PoA state (if any.) The old processBlock() function without the _Clique_ descriptor argument retorns an error on PoA networgs (e.g. Goerli.) * re-implemented Clique descriptor as _ref object_ why: gives more flexibility when moving around the descriptor object details: also cleaned up a bit the clique sources * comments for clarifying handling of Clique/PoA state descriptor
2021-07-06 13:14:45 +00:00
if vmState.cumulativeGasUsed != header.gasUsed:
# TODO replace logging with better error
Feature/goerli replay clique poa (#743) * extract unused clique/mining support into separate file why: mining is currently unsupported by nimbus * Replay first 51840 transactions from Goerli block chain why: Currently Goerli is loaded but the block headers are not verified. Replaying allows real data PoA development. details: Simple stupid gzipped dump/undump layer for debugging based on the zlib module (no nim-faststream support.) This is a replay running against p2p/chain.persistBlocks() where the data were captured from. * prepare stubs for PoA engine * split executor source into sup-modules why: make room for updates, clique integration should go into executor/update_poastate.nim * Simplify p2p/executor.processBlock() function prototype why: vmState argument always wraps basicChainDB * split processBlock() into sub-functions why: isolate the part where it will support clique/poa * provided additional processTransaction() function prototype without _fork_ argument why: with the exception of some tests, the _fork_ argument is always derived from the other prototype argument _vmState_ details: similar situation with makeReceipt() * provide new processBlock() version explicitly supporting PoA details: The new processBlock() version supporting PoA is the general one also supporting non-PoA networks, it needs an additional _Clique_ descriptor function argument for PoA state (if any.) The old processBlock() function without the _Clique_ descriptor argument retorns an error on PoA networgs (e.g. Goerli.) * re-implemented Clique descriptor as _ref object_ why: gives more flexibility when moving around the descriptor object details: also cleaned up a bit the clique sources * comments for clarifying handling of Clique/PoA state descriptor
2021-07-06 13:14:45 +00:00
debug "gasUsed neq cumulativeGasUsed",
gasUsed = header.gasUsed, cumulativeGasUsed = vmState.cumulativeGasUsed
return err("gasUsed mismatch")
Feature/goerli replay clique poa (#743) * extract unused clique/mining support into separate file why: mining is currently unsupported by nimbus * Replay first 51840 transactions from Goerli block chain why: Currently Goerli is loaded but the block headers are not verified. Replaying allows real data PoA development. details: Simple stupid gzipped dump/undump layer for debugging based on the zlib module (no nim-faststream support.) This is a replay running against p2p/chain.persistBlocks() where the data were captured from. * prepare stubs for PoA engine * split executor source into sup-modules why: make room for updates, clique integration should go into executor/update_poastate.nim * Simplify p2p/executor.processBlock() function prototype why: vmState argument always wraps basicChainDB * split processBlock() into sub-functions why: isolate the part where it will support clique/poa * provided additional processTransaction() function prototype without _fork_ argument why: with the exception of some tests, the _fork_ argument is always derived from the other prototype argument _vmState_ details: similar situation with makeReceipt() * provide new processBlock() version explicitly supporting PoA details: The new processBlock() version supporting PoA is the general one also supporting non-PoA networks, it needs an additional _Clique_ descriptor function argument for PoA state (if any.) The old processBlock() function without the _Clique_ descriptor argument retorns an error on PoA networgs (e.g. Goerli.) * re-implemented Clique descriptor as _ref object_ why: gives more flexibility when moving around the descriptor object details: also cleaned up a bit the clique sources * comments for clarifying handling of Clique/PoA state descriptor
2021-07-06 13:14:45 +00:00
if header.ommersHash != EMPTY_UNCLE_HASH:
# TODO It's strange that we persist uncles before processing block but the
# rest after...
if not skipUncles:
let h = vmState.com.db.persistUncles(blk.uncles)
if h != header.ommersHash:
return err("ommersHash mismatch")
elif not skipValidation and rlpHash(blk.uncles) != header.ommersHash:
return err("ommersHash mismatch")
elif blk.uncles.len > 0:
return err("Uncles in block with empty uncle hash")
Feature/goerli replay clique poa (#743) * extract unused clique/mining support into separate file why: mining is currently unsupported by nimbus * Replay first 51840 transactions from Goerli block chain why: Currently Goerli is loaded but the block headers are not verified. Replaying allows real data PoA development. details: Simple stupid gzipped dump/undump layer for debugging based on the zlib module (no nim-faststream support.) This is a replay running against p2p/chain.persistBlocks() where the data were captured from. * prepare stubs for PoA engine * split executor source into sup-modules why: make room for updates, clique integration should go into executor/update_poastate.nim * Simplify p2p/executor.processBlock() function prototype why: vmState argument always wraps basicChainDB * split processBlock() into sub-functions why: isolate the part where it will support clique/poa * provided additional processTransaction() function prototype without _fork_ argument why: with the exception of some tests, the _fork_ argument is always derived from the other prototype argument _vmState_ details: similar situation with makeReceipt() * provide new processBlock() version explicitly supporting PoA details: The new processBlock() version supporting PoA is the general one also supporting non-PoA networks, it needs an additional _Clique_ descriptor function argument for PoA state (if any.) The old processBlock() function without the _Clique_ descriptor argument retorns an error on PoA networgs (e.g. Goerli.) * re-implemented Clique descriptor as _ref object_ why: gives more flexibility when moving around the descriptor object details: also cleaned up a bit the clique sources * comments for clarifying handling of Clique/PoA state descriptor
2021-07-06 13:14:45 +00:00
ok()
Feature/goerli replay clique poa (#743) * extract unused clique/mining support into separate file why: mining is currently unsupported by nimbus * Replay first 51840 transactions from Goerli block chain why: Currently Goerli is loaded but the block headers are not verified. Replaying allows real data PoA development. details: Simple stupid gzipped dump/undump layer for debugging based on the zlib module (no nim-faststream support.) This is a replay running against p2p/chain.persistBlocks() where the data were captured from. * prepare stubs for PoA engine * split executor source into sup-modules why: make room for updates, clique integration should go into executor/update_poastate.nim * Simplify p2p/executor.processBlock() function prototype why: vmState argument always wraps basicChainDB * split processBlock() into sub-functions why: isolate the part where it will support clique/poa * provided additional processTransaction() function prototype without _fork_ argument why: with the exception of some tests, the _fork_ argument is always derived from the other prototype argument _vmState_ details: similar situation with makeReceipt() * provide new processBlock() version explicitly supporting PoA details: The new processBlock() version supporting PoA is the general one also supporting non-PoA networks, it needs an additional _Clique_ descriptor function argument for PoA state (if any.) The old processBlock() function without the _Clique_ descriptor argument retorns an error on PoA networgs (e.g. Goerli.) * re-implemented Clique descriptor as _ref object_ why: gives more flexibility when moving around the descriptor object details: also cleaned up a bit the clique sources * comments for clarifying handling of Clique/PoA state descriptor
2021-07-06 13:14:45 +00:00
proc procBlkEpilogue(
vmState: BaseVMState, blk: Block, skipValidation: bool, skipReceipts: bool
): Result[void, string] =
template header(): Header =
blk.header
Feature/goerli replay clique poa (#743) * extract unused clique/mining support into separate file why: mining is currently unsupported by nimbus * Replay first 51840 transactions from Goerli block chain why: Currently Goerli is loaded but the block headers are not verified. Replaying allows real data PoA development. details: Simple stupid gzipped dump/undump layer for debugging based on the zlib module (no nim-faststream support.) This is a replay running against p2p/chain.persistBlocks() where the data were captured from. * prepare stubs for PoA engine * split executor source into sup-modules why: make room for updates, clique integration should go into executor/update_poastate.nim * Simplify p2p/executor.processBlock() function prototype why: vmState argument always wraps basicChainDB * split processBlock() into sub-functions why: isolate the part where it will support clique/poa * provided additional processTransaction() function prototype without _fork_ argument why: with the exception of some tests, the _fork_ argument is always derived from the other prototype argument _vmState_ details: similar situation with makeReceipt() * provide new processBlock() version explicitly supporting PoA details: The new processBlock() version supporting PoA is the general one also supporting non-PoA networks, it needs an additional _Clique_ descriptor function argument for PoA state (if any.) The old processBlock() function without the _Clique_ descriptor argument retorns an error on PoA networgs (e.g. Goerli.) * re-implemented Clique descriptor as _ref object_ why: gives more flexibility when moving around the descriptor object details: also cleaned up a bit the clique sources * comments for clarifying handling of Clique/PoA state descriptor
2021-07-06 13:14:45 +00:00
# Reward beneficiary
vmState.mutateStateDB:
if vmState.collectWitnessData:
Feature/goerli replay clique poa (#743) * extract unused clique/mining support into separate file why: mining is currently unsupported by nimbus * Replay first 51840 transactions from Goerli block chain why: Currently Goerli is loaded but the block headers are not verified. Replaying allows real data PoA development. details: Simple stupid gzipped dump/undump layer for debugging based on the zlib module (no nim-faststream support.) This is a replay running against p2p/chain.persistBlocks() where the data were captured from. * prepare stubs for PoA engine * split executor source into sup-modules why: make room for updates, clique integration should go into executor/update_poastate.nim * Simplify p2p/executor.processBlock() function prototype why: vmState argument always wraps basicChainDB * split processBlock() into sub-functions why: isolate the part where it will support clique/poa * provided additional processTransaction() function prototype without _fork_ argument why: with the exception of some tests, the _fork_ argument is always derived from the other prototype argument _vmState_ details: similar situation with makeReceipt() * provide new processBlock() version explicitly supporting PoA details: The new processBlock() version supporting PoA is the general one also supporting non-PoA networks, it needs an additional _Clique_ descriptor function argument for PoA state (if any.) The old processBlock() function without the _Clique_ descriptor argument retorns an error on PoA networgs (e.g. Goerli.) * re-implemented Clique descriptor as _ref object_ why: gives more flexibility when moving around the descriptor object details: also cleaned up a bit the clique sources * comments for clarifying handling of Clique/PoA state descriptor
2021-07-06 13:14:45 +00:00
db.collectWitnessData()
# Clearing the account cache here helps manage its size when replaying
# large ranges of blocks, implicitly limiting its size using the gas limit
db.persist(
clearEmptyAccount = vmState.com.isSpuriousOrLater(header.number),
clearCache = true)
Feature/goerli replay clique poa (#743) * extract unused clique/mining support into separate file why: mining is currently unsupported by nimbus * Replay first 51840 transactions from Goerli block chain why: Currently Goerli is loaded but the block headers are not verified. Replaying allows real data PoA development. details: Simple stupid gzipped dump/undump layer for debugging based on the zlib module (no nim-faststream support.) This is a replay running against p2p/chain.persistBlocks() where the data were captured from. * prepare stubs for PoA engine * split executor source into sup-modules why: make room for updates, clique integration should go into executor/update_poastate.nim * Simplify p2p/executor.processBlock() function prototype why: vmState argument always wraps basicChainDB * split processBlock() into sub-functions why: isolate the part where it will support clique/poa * provided additional processTransaction() function prototype without _fork_ argument why: with the exception of some tests, the _fork_ argument is always derived from the other prototype argument _vmState_ details: similar situation with makeReceipt() * provide new processBlock() version explicitly supporting PoA details: The new processBlock() version supporting PoA is the general one also supporting non-PoA networks, it needs an additional _Clique_ descriptor function argument for PoA state (if any.) The old processBlock() function without the _Clique_ descriptor argument retorns an error on PoA networgs (e.g. Goerli.) * re-implemented Clique descriptor as _ref object_ why: gives more flexibility when moving around the descriptor object details: also cleaned up a bit the clique sources * comments for clarifying handling of Clique/PoA state descriptor
2021-07-06 13:14:45 +00:00
var
withdrawalReqs: seq[byte]
consolidationReqs: seq[byte]
if header.requestsHash.isSome:
# Execute EIP-7002 and EIP-7251 before calculating stateRoot
# because they will alter the state
withdrawalReqs = processDequeueWithdrawalRequests(vmState)
consolidationReqs = processDequeueConsolidationRequests(vmState)
if not skipValidation:
let stateRoot = vmState.stateDB.getStateRoot()
if header.stateRoot != stateRoot:
# TODO replace logging with better error
debug "wrong state root in block",
blockNumber = header.number,
expected = header.stateRoot,
actual = stateRoot,
arrivedFrom = vmState.parent.stateRoot
return err("stateRoot mismatch, expect: " &
$header.stateRoot & ", got: " & $stateRoot)
if not skipReceipts:
let bloom = createBloom(vmState.receipts)
if header.logsBloom != bloom:
return err("bloom mismatch")
let receiptsRoot = calcReceiptsRoot(vmState.receipts)
if header.receiptsRoot != receiptsRoot:
# TODO replace logging with better error
debug "wrong receiptRoot in block",
blockNumber = header.number,
actual = receiptsRoot,
expected = header.receiptsRoot
return err("receiptRoot mismatch")
Feature/goerli replay clique poa (#743) * extract unused clique/mining support into separate file why: mining is currently unsupported by nimbus * Replay first 51840 transactions from Goerli block chain why: Currently Goerli is loaded but the block headers are not verified. Replaying allows real data PoA development. details: Simple stupid gzipped dump/undump layer for debugging based on the zlib module (no nim-faststream support.) This is a replay running against p2p/chain.persistBlocks() where the data were captured from. * prepare stubs for PoA engine * split executor source into sup-modules why: make room for updates, clique integration should go into executor/update_poastate.nim * Simplify p2p/executor.processBlock() function prototype why: vmState argument always wraps basicChainDB * split processBlock() into sub-functions why: isolate the part where it will support clique/poa * provided additional processTransaction() function prototype without _fork_ argument why: with the exception of some tests, the _fork_ argument is always derived from the other prototype argument _vmState_ details: similar situation with makeReceipt() * provide new processBlock() version explicitly supporting PoA details: The new processBlock() version supporting PoA is the general one also supporting non-PoA networks, it needs an additional _Clique_ descriptor function argument for PoA state (if any.) The old processBlock() function without the _Clique_ descriptor argument retorns an error on PoA networgs (e.g. Goerli.) * re-implemented Clique descriptor as _ref object_ why: gives more flexibility when moving around the descriptor object details: also cleaned up a bit the clique sources * comments for clarifying handling of Clique/PoA state descriptor
2021-07-06 13:14:45 +00:00
if header.requestsHash.isSome:
let
depositReqs = ?parseDepositLogs(vmState.allLogs, vmState.com.depositContractAddress)
requestsHash = calcRequestsHash(depositReqs, withdrawalReqs, consolidationReqs)
if header.requestsHash.get != requestsHash:
debug "wrong requestsHash in block",
blockNumber = header.number,
actual = requestsHash,
expected = header.requestsHash.get
return err("requestsHash mismatch")
ok()
Feature/goerli replay clique poa (#743) * extract unused clique/mining support into separate file why: mining is currently unsupported by nimbus * Replay first 51840 transactions from Goerli block chain why: Currently Goerli is loaded but the block headers are not verified. Replaying allows real data PoA development. details: Simple stupid gzipped dump/undump layer for debugging based on the zlib module (no nim-faststream support.) This is a replay running against p2p/chain.persistBlocks() where the data were captured from. * prepare stubs for PoA engine * split executor source into sup-modules why: make room for updates, clique integration should go into executor/update_poastate.nim * Simplify p2p/executor.processBlock() function prototype why: vmState argument always wraps basicChainDB * split processBlock() into sub-functions why: isolate the part where it will support clique/poa * provided additional processTransaction() function prototype without _fork_ argument why: with the exception of some tests, the _fork_ argument is always derived from the other prototype argument _vmState_ details: similar situation with makeReceipt() * provide new processBlock() version explicitly supporting PoA details: The new processBlock() version supporting PoA is the general one also supporting non-PoA networks, it needs an additional _Clique_ descriptor function argument for PoA state (if any.) The old processBlock() function without the _Clique_ descriptor argument retorns an error on PoA networgs (e.g. Goerli.) * re-implemented Clique descriptor as _ref object_ why: gives more flexibility when moving around the descriptor object details: also cleaned up a bit the clique sources * comments for clarifying handling of Clique/PoA state descriptor
2021-07-06 13:14:45 +00:00
# ------------------------------------------------------------------------------
# Public functions
# ------------------------------------------------------------------------------
proc processBlock*(
vmState: BaseVMState, ## Parent environment of header/body block
blk: Block, ## Header/body block to add to the blockchain
skipValidation: bool = false,
skipReceipts: bool = false,
skipUncles: bool = false,
): Result[void, string] =
Consolidate block type for block processing (#2325) This PR consolidates the split header-body sequences into a single EthBlock sequence and cleans up the fallout from that which significantly reduces block processing overhead during import thanks to less garbage collection and fewer copies of things all around. Notably, since the number of headers must always match the number of bodies, we also get rid of a pointless degree of freedom that in the future could introduce unnecessary bugs. * only read header and body from era file * avoid several unnecessary copies along the block processing way * simplify signatures, cleaning up unused arguemnts and returns * use `stew/assign2` in a few strategic places where the generated nim assignent is slow and add a few `move` to work around poor analysis in nim 1.6 (will need to be revisited for 2.0) ``` stats-20240607_2223-a814aa0b.csv vs stats-20240608_0714-21c1d0a9.csv bps_x bps_y tps_x tps_y bpsd tpsd timed block_number (498305, 713245] 1,540.52 1,809.73 2,361.58 2775.340189 17.63% 17.63% -14.92% (713245, 928185] 730.36 865.26 1,715.90 2028.973852 18.01% 18.01% -15.21% (928185, 1143126] 663.03 789.10 2,529.26 3032.490771 19.79% 19.79% -16.28% (1143126, 1358066] 393.46 508.05 2,152.50 2777.578119 29.13% 29.13% -22.50% (1358066, 1573007] 370.88 440.72 2,351.31 2791.896052 18.81% 18.81% -15.80% (1573007, 1787947] 283.65 335.11 2,068.93 2441.373402 17.60% 17.60% -14.91% (1787947, 2002888] 287.29 342.11 2,078.39 2474.179448 18.99% 18.99% -15.91% (2002888, 2217828] 293.38 343.16 2,208.83 2584.77457 17.16% 17.16% -14.61% (2217828, 2432769] 140.09 167.86 1,081.87 1296.336926 18.82% 18.82% -15.80% blocks: 1934464, baseline: 3h13m1s, contender: 2h43m47s bpsd (mean): 19.55% tpsd (mean): 19.55% Time (total): -29m13s, -15.14% ```
2024-06-09 14:32:20 +00:00
## Generalised function to processes `blk` for any network.
?vmState.procBlkPreamble(blk, skipValidation, skipReceipts, skipUncles)
Feature/goerli replay clique poa (#743) * extract unused clique/mining support into separate file why: mining is currently unsupported by nimbus * Replay first 51840 transactions from Goerli block chain why: Currently Goerli is loaded but the block headers are not verified. Replaying allows real data PoA development. details: Simple stupid gzipped dump/undump layer for debugging based on the zlib module (no nim-faststream support.) This is a replay running against p2p/chain.persistBlocks() where the data were captured from. * prepare stubs for PoA engine * split executor source into sup-modules why: make room for updates, clique integration should go into executor/update_poastate.nim * Simplify p2p/executor.processBlock() function prototype why: vmState argument always wraps basicChainDB * split processBlock() into sub-functions why: isolate the part where it will support clique/poa * provided additional processTransaction() function prototype without _fork_ argument why: with the exception of some tests, the _fork_ argument is always derived from the other prototype argument _vmState_ details: similar situation with makeReceipt() * provide new processBlock() version explicitly supporting PoA details: The new processBlock() version supporting PoA is the general one also supporting non-PoA networks, it needs an additional _Clique_ descriptor function argument for PoA state (if any.) The old processBlock() function without the _Clique_ descriptor argument retorns an error on PoA networgs (e.g. Goerli.) * re-implemented Clique descriptor as _ref object_ why: gives more flexibility when moving around the descriptor object details: also cleaned up a bit the clique sources * comments for clarifying handling of Clique/PoA state descriptor
2021-07-06 13:14:45 +00:00
2022-12-02 04:35:41 +00:00
# EIP-3675: no reward for miner in POA/POS
if not vmState.com.proofOfStake(blk.header):
Consolidate block type for block processing (#2325) This PR consolidates the split header-body sequences into a single EthBlock sequence and cleans up the fallout from that which significantly reduces block processing overhead during import thanks to less garbage collection and fewer copies of things all around. Notably, since the number of headers must always match the number of bodies, we also get rid of a pointless degree of freedom that in the future could introduce unnecessary bugs. * only read header and body from era file * avoid several unnecessary copies along the block processing way * simplify signatures, cleaning up unused arguemnts and returns * use `stew/assign2` in a few strategic places where the generated nim assignent is slow and add a few `move` to work around poor analysis in nim 1.6 (will need to be revisited for 2.0) ``` stats-20240607_2223-a814aa0b.csv vs stats-20240608_0714-21c1d0a9.csv bps_x bps_y tps_x tps_y bpsd tpsd timed block_number (498305, 713245] 1,540.52 1,809.73 2,361.58 2775.340189 17.63% 17.63% -14.92% (713245, 928185] 730.36 865.26 1,715.90 2028.973852 18.01% 18.01% -15.21% (928185, 1143126] 663.03 789.10 2,529.26 3032.490771 19.79% 19.79% -16.28% (1143126, 1358066] 393.46 508.05 2,152.50 2777.578119 29.13% 29.13% -22.50% (1358066, 1573007] 370.88 440.72 2,351.31 2791.896052 18.81% 18.81% -15.80% (1573007, 1787947] 283.65 335.11 2,068.93 2441.373402 17.60% 17.60% -14.91% (1787947, 2002888] 287.29 342.11 2,078.39 2474.179448 18.99% 18.99% -15.91% (2002888, 2217828] 293.38 343.16 2,208.83 2584.77457 17.16% 17.16% -14.61% (2217828, 2432769] 140.09 167.86 1,081.87 1296.336926 18.82% 18.82% -15.80% blocks: 1934464, baseline: 3h13m1s, contender: 2h43m47s bpsd (mean): 19.55% tpsd (mean): 19.55% Time (total): -29m13s, -15.14% ```
2024-06-09 14:32:20 +00:00
vmState.calculateReward(blk.header, blk.uncles)
Feature/goerli replay clique poa (#743) * extract unused clique/mining support into separate file why: mining is currently unsupported by nimbus * Replay first 51840 transactions from Goerli block chain why: Currently Goerli is loaded but the block headers are not verified. Replaying allows real data PoA development. details: Simple stupid gzipped dump/undump layer for debugging based on the zlib module (no nim-faststream support.) This is a replay running against p2p/chain.persistBlocks() where the data were captured from. * prepare stubs for PoA engine * split executor source into sup-modules why: make room for updates, clique integration should go into executor/update_poastate.nim * Simplify p2p/executor.processBlock() function prototype why: vmState argument always wraps basicChainDB * split processBlock() into sub-functions why: isolate the part where it will support clique/poa * provided additional processTransaction() function prototype without _fork_ argument why: with the exception of some tests, the _fork_ argument is always derived from the other prototype argument _vmState_ details: similar situation with makeReceipt() * provide new processBlock() version explicitly supporting PoA details: The new processBlock() version supporting PoA is the general one also supporting non-PoA networks, it needs an additional _Clique_ descriptor function argument for PoA state (if any.) The old processBlock() function without the _Clique_ descriptor argument retorns an error on PoA networgs (e.g. Goerli.) * re-implemented Clique descriptor as _ref object_ why: gives more flexibility when moving around the descriptor object details: also cleaned up a bit the clique sources * comments for clarifying handling of Clique/PoA state descriptor
2021-07-06 13:14:45 +00:00
?vmState.procBlkEpilogue(blk, skipValidation, skipReceipts)
Feature/goerli replay clique poa (#743) * extract unused clique/mining support into separate file why: mining is currently unsupported by nimbus * Replay first 51840 transactions from Goerli block chain why: Currently Goerli is loaded but the block headers are not verified. Replaying allows real data PoA development. details: Simple stupid gzipped dump/undump layer for debugging based on the zlib module (no nim-faststream support.) This is a replay running against p2p/chain.persistBlocks() where the data were captured from. * prepare stubs for PoA engine * split executor source into sup-modules why: make room for updates, clique integration should go into executor/update_poastate.nim * Simplify p2p/executor.processBlock() function prototype why: vmState argument always wraps basicChainDB * split processBlock() into sub-functions why: isolate the part where it will support clique/poa * provided additional processTransaction() function prototype without _fork_ argument why: with the exception of some tests, the _fork_ argument is always derived from the other prototype argument _vmState_ details: similar situation with makeReceipt() * provide new processBlock() version explicitly supporting PoA details: The new processBlock() version supporting PoA is the general one also supporting non-PoA networks, it needs an additional _Clique_ descriptor function argument for PoA state (if any.) The old processBlock() function without the _Clique_ descriptor argument retorns an error on PoA networgs (e.g. Goerli.) * re-implemented Clique descriptor as _ref object_ why: gives more flexibility when moving around the descriptor object details: also cleaned up a bit the clique sources * comments for clarifying handling of Clique/PoA state descriptor
2021-07-06 13:14:45 +00:00
ok()
Feature/goerli replay clique poa (#743) * extract unused clique/mining support into separate file why: mining is currently unsupported by nimbus * Replay first 51840 transactions from Goerli block chain why: Currently Goerli is loaded but the block headers are not verified. Replaying allows real data PoA development. details: Simple stupid gzipped dump/undump layer for debugging based on the zlib module (no nim-faststream support.) This is a replay running against p2p/chain.persistBlocks() where the data were captured from. * prepare stubs for PoA engine * split executor source into sup-modules why: make room for updates, clique integration should go into executor/update_poastate.nim * Simplify p2p/executor.processBlock() function prototype why: vmState argument always wraps basicChainDB * split processBlock() into sub-functions why: isolate the part where it will support clique/poa * provided additional processTransaction() function prototype without _fork_ argument why: with the exception of some tests, the _fork_ argument is always derived from the other prototype argument _vmState_ details: similar situation with makeReceipt() * provide new processBlock() version explicitly supporting PoA details: The new processBlock() version supporting PoA is the general one also supporting non-PoA networks, it needs an additional _Clique_ descriptor function argument for PoA state (if any.) The old processBlock() function without the _Clique_ descriptor argument retorns an error on PoA networgs (e.g. Goerli.) * re-implemented Clique descriptor as _ref object_ why: gives more flexibility when moving around the descriptor object details: also cleaned up a bit the clique sources * comments for clarifying handling of Clique/PoA state descriptor
2021-07-06 13:14:45 +00:00
# ------------------------------------------------------------------------------
# End
# ------------------------------------------------------------------------------