2024-09-09 09:12:56 +00:00
|
|
|
# Nimbus
|
|
|
|
|
# Copyright (c) 2023-2024 Status Research & Development GmbH
|
|
|
|
|
# Licensed and distributed under either of
|
|
|
|
|
# * MIT license (license terms in the root directory or at
|
|
|
|
|
# https://opensource.org/licenses/MIT).
|
|
|
|
|
# * Apache v2 license (license terms in the root directory or at
|
|
|
|
|
# https://www.apache.org/licenses/LICENSE-2.0).
|
|
|
|
|
# at your option. This file may not be copied, modified, or distributed
|
|
|
|
|
# except according to those terms.
|
|
|
|
|
|
|
|
|
|
{.push raises:[].}
|
|
|
|
|
|
|
|
|
|
import
|
|
|
|
|
pkg/metrics,
|
Flare sync (#2627)
* Cosmetics, small fixes, add stashed headers verifier
* Remove direct `Era1` support
why:
Era1 is indirectly supported by using the import tool before syncing.
* Clarify database persistent save function.
why:
Function relied on the last saved state block number which was wrong.
It now relies on the tx-level. If it is 0, then data are saved directly.
Otherwise the task that owns the tx will do it.
* Extracted configuration constants into separate file
* Enable single peer mode for debugging
* Fix peer losing issue in multi-mode
details:
Running concurrent download peers was previously programmed as running
a batch downloading and storing ~8k headers and then leaving the `async`
function to be restarted by a scheduler.
This was unfortunate because of occasionally occurring long waiting
times for restart.
While the time gap until restarting were typically observed a few
millisecs, there were always a few outliers which well exceed several
seconds. This seemed to let remote peers run into timeouts.
* Prefix function names `unprocXxx()` and `stagedYyy()` by `headers`
why:
There will be other `unproc` and `staged` modules.
* Remove cruft, update logging
* Fix accounting issue
details:
When staging after fetching headers from the network, there was an off
by 1 error occurring when the result was by one smaller than requested.
Also, a whole range was mis-accounted when a peer was terminating
connection immediately after responding.
* Fix slow/error header accounting when fetching
why:
Originally set for detecting slow headers in a row, the counter
was wrongly extended to general errors.
* Ban peers for a while that respond with too few headers continuously
why:
Some peers only returned one header at a time. If these peers sit on a
farm, they might collectively slow down the download process.
* Update RPC beacon header updater
why:
Old function hook has slightly changed its meaning since it was used
for snap sync. Also, the old hook is used by other functions already.
* Limit number of peers or set to single peer mode
details:
Merge several concepts, single peer mode being one of it.
* Some code clean up, fixings for removing of compiler warnings
* De-noise header fetch related sources
why:
Header download looks relatively stable, so general debugging is not
needed, anymore. This is the equivalent of removing the scaffold from
the part of the building where work has completed.
* More clean up and code prettification for headers stuff
* Implement body fetch and block import
details:
Available headers are used stage blocks by combining existing headers
with newly fetched blocks. Then these blocks are imported/executed via
`persistBlocks()`.
* Logger cosmetics and cleanup
* Remove staged block queue debugging
details:
Feature still available, just not executed anymore
* Docu, logging update
* Update/simplify `runDaemon()`
* Re-calibrate block body requests and soft config for import blocks batch
why:
* For fetching, larger fetch requests are mostly truncated anyway on
MainNet.
* For executing, smaller batch sizes reduce the memory needed for the
price of longer execution times.
* Update metrics counters
* Docu update
* Some fixes, formatting updates, etc.
* Update `borrowed` type: uint -. uint64
also:
Always convert to `uint64` rather than `uint` where appropriate
2024-09-27 15:07:42 +00:00
|
|
|
../../worker_desc,
|
|
|
|
|
".."/[db, blocks_staged, headers_staged]
|
2024-09-09 09:12:56 +00:00
|
|
|
|
|
|
|
|
|
2024-10-03 20:19:11 +00:00
|
|
|
declareGauge beacon_base, "" &
|
Flare sync (#2627)
* Cosmetics, small fixes, add stashed headers verifier
* Remove direct `Era1` support
why:
Era1 is indirectly supported by using the import tool before syncing.
* Clarify database persistent save function.
why:
Function relied on the last saved state block number which was wrong.
It now relies on the tx-level. If it is 0, then data are saved directly.
Otherwise the task that owns the tx will do it.
* Extracted configuration constants into separate file
* Enable single peer mode for debugging
* Fix peer losing issue in multi-mode
details:
Running concurrent download peers was previously programmed as running
a batch downloading and storing ~8k headers and then leaving the `async`
function to be restarted by a scheduler.
This was unfortunate because of occasionally occurring long waiting
times for restart.
While the time gap until restarting were typically observed a few
millisecs, there were always a few outliers which well exceed several
seconds. This seemed to let remote peers run into timeouts.
* Prefix function names `unprocXxx()` and `stagedYyy()` by `headers`
why:
There will be other `unproc` and `staged` modules.
* Remove cruft, update logging
* Fix accounting issue
details:
When staging after fetching headers from the network, there was an off
by 1 error occurring when the result was by one smaller than requested.
Also, a whole range was mis-accounted when a peer was terminating
connection immediately after responding.
* Fix slow/error header accounting when fetching
why:
Originally set for detecting slow headers in a row, the counter
was wrongly extended to general errors.
* Ban peers for a while that respond with too few headers continuously
why:
Some peers only returned one header at a time. If these peers sit on a
farm, they might collectively slow down the download process.
* Update RPC beacon header updater
why:
Old function hook has slightly changed its meaning since it was used
for snap sync. Also, the old hook is used by other functions already.
* Limit number of peers or set to single peer mode
details:
Merge several concepts, single peer mode being one of it.
* Some code clean up, fixings for removing of compiler warnings
* De-noise header fetch related sources
why:
Header download looks relatively stable, so general debugging is not
needed, anymore. This is the equivalent of removing the scaffold from
the part of the building where work has completed.
* More clean up and code prettification for headers stuff
* Implement body fetch and block import
details:
Available headers are used stage blocks by combining existing headers
with newly fetched blocks. Then these blocks are imported/executed via
`persistBlocks()`.
* Logger cosmetics and cleanup
* Remove staged block queue debugging
details:
Feature still available, just not executed anymore
* Docu, logging update
* Update/simplify `runDaemon()`
* Re-calibrate block body requests and soft config for import blocks batch
why:
* For fetching, larger fetch requests are mostly truncated anyway on
MainNet.
* For executing, smaller batch sizes reduce the memory needed for the
price of longer execution times.
* Update metrics counters
* Docu update
* Some fixes, formatting updates, etc.
* Update `borrowed` type: uint -. uint64
also:
Always convert to `uint64` rather than `uint` where appropriate
2024-09-27 15:07:42 +00:00
|
|
|
"Max block number of imported/executed blocks"
|
|
|
|
|
|
2024-10-03 20:19:11 +00:00
|
|
|
declareGauge beacon_coupler, "" &
|
|
|
|
|
"Max block number for header chain starting at genesis"
|
2024-09-09 09:12:56 +00:00
|
|
|
|
2024-10-03 20:19:11 +00:00
|
|
|
declareGauge beacon_dangling, "" &
|
Flare sync (#2627)
* Cosmetics, small fixes, add stashed headers verifier
* Remove direct `Era1` support
why:
Era1 is indirectly supported by using the import tool before syncing.
* Clarify database persistent save function.
why:
Function relied on the last saved state block number which was wrong.
It now relies on the tx-level. If it is 0, then data are saved directly.
Otherwise the task that owns the tx will do it.
* Extracted configuration constants into separate file
* Enable single peer mode for debugging
* Fix peer losing issue in multi-mode
details:
Running concurrent download peers was previously programmed as running
a batch downloading and storing ~8k headers and then leaving the `async`
function to be restarted by a scheduler.
This was unfortunate because of occasionally occurring long waiting
times for restart.
While the time gap until restarting were typically observed a few
millisecs, there were always a few outliers which well exceed several
seconds. This seemed to let remote peers run into timeouts.
* Prefix function names `unprocXxx()` and `stagedYyy()` by `headers`
why:
There will be other `unproc` and `staged` modules.
* Remove cruft, update logging
* Fix accounting issue
details:
When staging after fetching headers from the network, there was an off
by 1 error occurring when the result was by one smaller than requested.
Also, a whole range was mis-accounted when a peer was terminating
connection immediately after responding.
* Fix slow/error header accounting when fetching
why:
Originally set for detecting slow headers in a row, the counter
was wrongly extended to general errors.
* Ban peers for a while that respond with too few headers continuously
why:
Some peers only returned one header at a time. If these peers sit on a
farm, they might collectively slow down the download process.
* Update RPC beacon header updater
why:
Old function hook has slightly changed its meaning since it was used
for snap sync. Also, the old hook is used by other functions already.
* Limit number of peers or set to single peer mode
details:
Merge several concepts, single peer mode being one of it.
* Some code clean up, fixings for removing of compiler warnings
* De-noise header fetch related sources
why:
Header download looks relatively stable, so general debugging is not
needed, anymore. This is the equivalent of removing the scaffold from
the part of the building where work has completed.
* More clean up and code prettification for headers stuff
* Implement body fetch and block import
details:
Available headers are used stage blocks by combining existing headers
with newly fetched blocks. Then these blocks are imported/executed via
`persistBlocks()`.
* Logger cosmetics and cleanup
* Remove staged block queue debugging
details:
Feature still available, just not executed anymore
* Docu, logging update
* Update/simplify `runDaemon()`
* Re-calibrate block body requests and soft config for import blocks batch
why:
* For fetching, larger fetch requests are mostly truncated anyway on
MainNet.
* For executing, smaller batch sizes reduce the memory needed for the
price of longer execution times.
* Update metrics counters
* Docu update
* Some fixes, formatting updates, etc.
* Update `borrowed` type: uint -. uint64
also:
Always convert to `uint64` rather than `uint` where appropriate
2024-09-27 15:07:42 +00:00
|
|
|
"Starting/min block number for higher up headers chain"
|
2024-09-09 09:12:56 +00:00
|
|
|
|
2024-10-03 20:19:11 +00:00
|
|
|
declareGauge beacon_end, "" &
|
Flare sync (#2627)
* Cosmetics, small fixes, add stashed headers verifier
* Remove direct `Era1` support
why:
Era1 is indirectly supported by using the import tool before syncing.
* Clarify database persistent save function.
why:
Function relied on the last saved state block number which was wrong.
It now relies on the tx-level. If it is 0, then data are saved directly.
Otherwise the task that owns the tx will do it.
* Extracted configuration constants into separate file
* Enable single peer mode for debugging
* Fix peer losing issue in multi-mode
details:
Running concurrent download peers was previously programmed as running
a batch downloading and storing ~8k headers and then leaving the `async`
function to be restarted by a scheduler.
This was unfortunate because of occasionally occurring long waiting
times for restart.
While the time gap until restarting were typically observed a few
millisecs, there were always a few outliers which well exceed several
seconds. This seemed to let remote peers run into timeouts.
* Prefix function names `unprocXxx()` and `stagedYyy()` by `headers`
why:
There will be other `unproc` and `staged` modules.
* Remove cruft, update logging
* Fix accounting issue
details:
When staging after fetching headers from the network, there was an off
by 1 error occurring when the result was by one smaller than requested.
Also, a whole range was mis-accounted when a peer was terminating
connection immediately after responding.
* Fix slow/error header accounting when fetching
why:
Originally set for detecting slow headers in a row, the counter
was wrongly extended to general errors.
* Ban peers for a while that respond with too few headers continuously
why:
Some peers only returned one header at a time. If these peers sit on a
farm, they might collectively slow down the download process.
* Update RPC beacon header updater
why:
Old function hook has slightly changed its meaning since it was used
for snap sync. Also, the old hook is used by other functions already.
* Limit number of peers or set to single peer mode
details:
Merge several concepts, single peer mode being one of it.
* Some code clean up, fixings for removing of compiler warnings
* De-noise header fetch related sources
why:
Header download looks relatively stable, so general debugging is not
needed, anymore. This is the equivalent of removing the scaffold from
the part of the building where work has completed.
* More clean up and code prettification for headers stuff
* Implement body fetch and block import
details:
Available headers are used stage blocks by combining existing headers
with newly fetched blocks. Then these blocks are imported/executed via
`persistBlocks()`.
* Logger cosmetics and cleanup
* Remove staged block queue debugging
details:
Feature still available, just not executed anymore
* Docu, logging update
* Update/simplify `runDaemon()`
* Re-calibrate block body requests and soft config for import blocks batch
why:
* For fetching, larger fetch requests are mostly truncated anyway on
MainNet.
* For executing, smaller batch sizes reduce the memory needed for the
price of longer execution times.
* Update metrics counters
* Docu update
* Some fixes, formatting updates, etc.
* Update `borrowed` type: uint -. uint64
also:
Always convert to `uint64` rather than `uint` where appropriate
2024-09-27 15:07:42 +00:00
|
|
|
"Ending/max block number of higher up headers chain"
|
2024-09-09 09:12:56 +00:00
|
|
|
|
2024-10-03 20:19:11 +00:00
|
|
|
declareGauge beacon_final, "" &
|
|
|
|
|
"Block number of latest known finalised header"
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
declareGauge beacon_header_lists_staged, "" &
|
Flare sync (#2627)
* Cosmetics, small fixes, add stashed headers verifier
* Remove direct `Era1` support
why:
Era1 is indirectly supported by using the import tool before syncing.
* Clarify database persistent save function.
why:
Function relied on the last saved state block number which was wrong.
It now relies on the tx-level. If it is 0, then data are saved directly.
Otherwise the task that owns the tx will do it.
* Extracted configuration constants into separate file
* Enable single peer mode for debugging
* Fix peer losing issue in multi-mode
details:
Running concurrent download peers was previously programmed as running
a batch downloading and storing ~8k headers and then leaving the `async`
function to be restarted by a scheduler.
This was unfortunate because of occasionally occurring long waiting
times for restart.
While the time gap until restarting were typically observed a few
millisecs, there were always a few outliers which well exceed several
seconds. This seemed to let remote peers run into timeouts.
* Prefix function names `unprocXxx()` and `stagedYyy()` by `headers`
why:
There will be other `unproc` and `staged` modules.
* Remove cruft, update logging
* Fix accounting issue
details:
When staging after fetching headers from the network, there was an off
by 1 error occurring when the result was by one smaller than requested.
Also, a whole range was mis-accounted when a peer was terminating
connection immediately after responding.
* Fix slow/error header accounting when fetching
why:
Originally set for detecting slow headers in a row, the counter
was wrongly extended to general errors.
* Ban peers for a while that respond with too few headers continuously
why:
Some peers only returned one header at a time. If these peers sit on a
farm, they might collectively slow down the download process.
* Update RPC beacon header updater
why:
Old function hook has slightly changed its meaning since it was used
for snap sync. Also, the old hook is used by other functions already.
* Limit number of peers or set to single peer mode
details:
Merge several concepts, single peer mode being one of it.
* Some code clean up, fixings for removing of compiler warnings
* De-noise header fetch related sources
why:
Header download looks relatively stable, so general debugging is not
needed, anymore. This is the equivalent of removing the scaffold from
the part of the building where work has completed.
* More clean up and code prettification for headers stuff
* Implement body fetch and block import
details:
Available headers are used stage blocks by combining existing headers
with newly fetched blocks. Then these blocks are imported/executed via
`persistBlocks()`.
* Logger cosmetics and cleanup
* Remove staged block queue debugging
details:
Feature still available, just not executed anymore
* Docu, logging update
* Update/simplify `runDaemon()`
* Re-calibrate block body requests and soft config for import blocks batch
why:
* For fetching, larger fetch requests are mostly truncated anyway on
MainNet.
* For executing, smaller batch sizes reduce the memory needed for the
price of longer execution times.
* Update metrics counters
* Docu update
* Some fixes, formatting updates, etc.
* Update `borrowed` type: uint -. uint64
also:
Always convert to `uint64` rather than `uint` where appropriate
2024-09-27 15:07:42 +00:00
|
|
|
"Number of header list records staged for serialised processing"
|
2024-09-09 09:12:56 +00:00
|
|
|
|
2024-10-02 11:31:33 +00:00
|
|
|
declareGauge beacon_headers_unprocessed, "" &
|
Flare sync (#2627)
* Cosmetics, small fixes, add stashed headers verifier
* Remove direct `Era1` support
why:
Era1 is indirectly supported by using the import tool before syncing.
* Clarify database persistent save function.
why:
Function relied on the last saved state block number which was wrong.
It now relies on the tx-level. If it is 0, then data are saved directly.
Otherwise the task that owns the tx will do it.
* Extracted configuration constants into separate file
* Enable single peer mode for debugging
* Fix peer losing issue in multi-mode
details:
Running concurrent download peers was previously programmed as running
a batch downloading and storing ~8k headers and then leaving the `async`
function to be restarted by a scheduler.
This was unfortunate because of occasionally occurring long waiting
times for restart.
While the time gap until restarting were typically observed a few
millisecs, there were always a few outliers which well exceed several
seconds. This seemed to let remote peers run into timeouts.
* Prefix function names `unprocXxx()` and `stagedYyy()` by `headers`
why:
There will be other `unproc` and `staged` modules.
* Remove cruft, update logging
* Fix accounting issue
details:
When staging after fetching headers from the network, there was an off
by 1 error occurring when the result was by one smaller than requested.
Also, a whole range was mis-accounted when a peer was terminating
connection immediately after responding.
* Fix slow/error header accounting when fetching
why:
Originally set for detecting slow headers in a row, the counter
was wrongly extended to general errors.
* Ban peers for a while that respond with too few headers continuously
why:
Some peers only returned one header at a time. If these peers sit on a
farm, they might collectively slow down the download process.
* Update RPC beacon header updater
why:
Old function hook has slightly changed its meaning since it was used
for snap sync. Also, the old hook is used by other functions already.
* Limit number of peers or set to single peer mode
details:
Merge several concepts, single peer mode being one of it.
* Some code clean up, fixings for removing of compiler warnings
* De-noise header fetch related sources
why:
Header download looks relatively stable, so general debugging is not
needed, anymore. This is the equivalent of removing the scaffold from
the part of the building where work has completed.
* More clean up and code prettification for headers stuff
* Implement body fetch and block import
details:
Available headers are used stage blocks by combining existing headers
with newly fetched blocks. Then these blocks are imported/executed via
`persistBlocks()`.
* Logger cosmetics and cleanup
* Remove staged block queue debugging
details:
Feature still available, just not executed anymore
* Docu, logging update
* Update/simplify `runDaemon()`
* Re-calibrate block body requests and soft config for import blocks batch
why:
* For fetching, larger fetch requests are mostly truncated anyway on
MainNet.
* For executing, smaller batch sizes reduce the memory needed for the
price of longer execution times.
* Update metrics counters
* Docu update
* Some fixes, formatting updates, etc.
* Update `borrowed` type: uint -. uint64
also:
Always convert to `uint64` rather than `uint` where appropriate
2024-09-27 15:07:42 +00:00
|
|
|
"Number of block numbers ready to fetch and stage headers"
|
|
|
|
|
|
2024-10-03 20:19:11 +00:00
|
|
|
declareGauge beacon_block_lists_staged, "" &
|
Flare sync (#2627)
* Cosmetics, small fixes, add stashed headers verifier
* Remove direct `Era1` support
why:
Era1 is indirectly supported by using the import tool before syncing.
* Clarify database persistent save function.
why:
Function relied on the last saved state block number which was wrong.
It now relies on the tx-level. If it is 0, then data are saved directly.
Otherwise the task that owns the tx will do it.
* Extracted configuration constants into separate file
* Enable single peer mode for debugging
* Fix peer losing issue in multi-mode
details:
Running concurrent download peers was previously programmed as running
a batch downloading and storing ~8k headers and then leaving the `async`
function to be restarted by a scheduler.
This was unfortunate because of occasionally occurring long waiting
times for restart.
While the time gap until restarting were typically observed a few
millisecs, there were always a few outliers which well exceed several
seconds. This seemed to let remote peers run into timeouts.
* Prefix function names `unprocXxx()` and `stagedYyy()` by `headers`
why:
There will be other `unproc` and `staged` modules.
* Remove cruft, update logging
* Fix accounting issue
details:
When staging after fetching headers from the network, there was an off
by 1 error occurring when the result was by one smaller than requested.
Also, a whole range was mis-accounted when a peer was terminating
connection immediately after responding.
* Fix slow/error header accounting when fetching
why:
Originally set for detecting slow headers in a row, the counter
was wrongly extended to general errors.
* Ban peers for a while that respond with too few headers continuously
why:
Some peers only returned one header at a time. If these peers sit on a
farm, they might collectively slow down the download process.
* Update RPC beacon header updater
why:
Old function hook has slightly changed its meaning since it was used
for snap sync. Also, the old hook is used by other functions already.
* Limit number of peers or set to single peer mode
details:
Merge several concepts, single peer mode being one of it.
* Some code clean up, fixings for removing of compiler warnings
* De-noise header fetch related sources
why:
Header download looks relatively stable, so general debugging is not
needed, anymore. This is the equivalent of removing the scaffold from
the part of the building where work has completed.
* More clean up and code prettification for headers stuff
* Implement body fetch and block import
details:
Available headers are used stage blocks by combining existing headers
with newly fetched blocks. Then these blocks are imported/executed via
`persistBlocks()`.
* Logger cosmetics and cleanup
* Remove staged block queue debugging
details:
Feature still available, just not executed anymore
* Docu, logging update
* Update/simplify `runDaemon()`
* Re-calibrate block body requests and soft config for import blocks batch
why:
* For fetching, larger fetch requests are mostly truncated anyway on
MainNet.
* For executing, smaller batch sizes reduce the memory needed for the
price of longer execution times.
* Update metrics counters
* Docu update
* Some fixes, formatting updates, etc.
* Update `borrowed` type: uint -. uint64
also:
Always convert to `uint64` rather than `uint` where appropriate
2024-09-27 15:07:42 +00:00
|
|
|
"Number of block list records staged for importing"
|
|
|
|
|
|
2024-10-02 11:31:33 +00:00
|
|
|
declareGauge beacon_blocks_unprocessed, "" &
|
Flare sync (#2627)
* Cosmetics, small fixes, add stashed headers verifier
* Remove direct `Era1` support
why:
Era1 is indirectly supported by using the import tool before syncing.
* Clarify database persistent save function.
why:
Function relied on the last saved state block number which was wrong.
It now relies on the tx-level. If it is 0, then data are saved directly.
Otherwise the task that owns the tx will do it.
* Extracted configuration constants into separate file
* Enable single peer mode for debugging
* Fix peer losing issue in multi-mode
details:
Running concurrent download peers was previously programmed as running
a batch downloading and storing ~8k headers and then leaving the `async`
function to be restarted by a scheduler.
This was unfortunate because of occasionally occurring long waiting
times for restart.
While the time gap until restarting were typically observed a few
millisecs, there were always a few outliers which well exceed several
seconds. This seemed to let remote peers run into timeouts.
* Prefix function names `unprocXxx()` and `stagedYyy()` by `headers`
why:
There will be other `unproc` and `staged` modules.
* Remove cruft, update logging
* Fix accounting issue
details:
When staging after fetching headers from the network, there was an off
by 1 error occurring when the result was by one smaller than requested.
Also, a whole range was mis-accounted when a peer was terminating
connection immediately after responding.
* Fix slow/error header accounting when fetching
why:
Originally set for detecting slow headers in a row, the counter
was wrongly extended to general errors.
* Ban peers for a while that respond with too few headers continuously
why:
Some peers only returned one header at a time. If these peers sit on a
farm, they might collectively slow down the download process.
* Update RPC beacon header updater
why:
Old function hook has slightly changed its meaning since it was used
for snap sync. Also, the old hook is used by other functions already.
* Limit number of peers or set to single peer mode
details:
Merge several concepts, single peer mode being one of it.
* Some code clean up, fixings for removing of compiler warnings
* De-noise header fetch related sources
why:
Header download looks relatively stable, so general debugging is not
needed, anymore. This is the equivalent of removing the scaffold from
the part of the building where work has completed.
* More clean up and code prettification for headers stuff
* Implement body fetch and block import
details:
Available headers are used stage blocks by combining existing headers
with newly fetched blocks. Then these blocks are imported/executed via
`persistBlocks()`.
* Logger cosmetics and cleanup
* Remove staged block queue debugging
details:
Feature still available, just not executed anymore
* Docu, logging update
* Update/simplify `runDaemon()`
* Re-calibrate block body requests and soft config for import blocks batch
why:
* For fetching, larger fetch requests are mostly truncated anyway on
MainNet.
* For executing, smaller batch sizes reduce the memory needed for the
price of longer execution times.
* Update metrics counters
* Docu update
* Some fixes, formatting updates, etc.
* Update `borrowed` type: uint -. uint64
also:
Always convert to `uint64` rather than `uint` where appropriate
2024-09-27 15:07:42 +00:00
|
|
|
"Number of block numbers ready to fetch and stage block data"
|
2024-09-09 09:12:56 +00:00
|
|
|
|
2024-10-03 20:19:11 +00:00
|
|
|
|
|
|
|
|
declareGauge beacon_buddies, "" &
|
Flare sync (#2627)
* Cosmetics, small fixes, add stashed headers verifier
* Remove direct `Era1` support
why:
Era1 is indirectly supported by using the import tool before syncing.
* Clarify database persistent save function.
why:
Function relied on the last saved state block number which was wrong.
It now relies on the tx-level. If it is 0, then data are saved directly.
Otherwise the task that owns the tx will do it.
* Extracted configuration constants into separate file
* Enable single peer mode for debugging
* Fix peer losing issue in multi-mode
details:
Running concurrent download peers was previously programmed as running
a batch downloading and storing ~8k headers and then leaving the `async`
function to be restarted by a scheduler.
This was unfortunate because of occasionally occurring long waiting
times for restart.
While the time gap until restarting were typically observed a few
millisecs, there were always a few outliers which well exceed several
seconds. This seemed to let remote peers run into timeouts.
* Prefix function names `unprocXxx()` and `stagedYyy()` by `headers`
why:
There will be other `unproc` and `staged` modules.
* Remove cruft, update logging
* Fix accounting issue
details:
When staging after fetching headers from the network, there was an off
by 1 error occurring when the result was by one smaller than requested.
Also, a whole range was mis-accounted when a peer was terminating
connection immediately after responding.
* Fix slow/error header accounting when fetching
why:
Originally set for detecting slow headers in a row, the counter
was wrongly extended to general errors.
* Ban peers for a while that respond with too few headers continuously
why:
Some peers only returned one header at a time. If these peers sit on a
farm, they might collectively slow down the download process.
* Update RPC beacon header updater
why:
Old function hook has slightly changed its meaning since it was used
for snap sync. Also, the old hook is used by other functions already.
* Limit number of peers or set to single peer mode
details:
Merge several concepts, single peer mode being one of it.
* Some code clean up, fixings for removing of compiler warnings
* De-noise header fetch related sources
why:
Header download looks relatively stable, so general debugging is not
needed, anymore. This is the equivalent of removing the scaffold from
the part of the building where work has completed.
* More clean up and code prettification for headers stuff
* Implement body fetch and block import
details:
Available headers are used stage blocks by combining existing headers
with newly fetched blocks. Then these blocks are imported/executed via
`persistBlocks()`.
* Logger cosmetics and cleanup
* Remove staged block queue debugging
details:
Feature still available, just not executed anymore
* Docu, logging update
* Update/simplify `runDaemon()`
* Re-calibrate block body requests and soft config for import blocks batch
why:
* For fetching, larger fetch requests are mostly truncated anyway on
MainNet.
* For executing, smaller batch sizes reduce the memory needed for the
price of longer execution times.
* Update metrics counters
* Docu update
* Some fixes, formatting updates, etc.
* Update `borrowed` type: uint -. uint64
also:
Always convert to `uint64` rather than `uint` where appropriate
2024-09-27 15:07:42 +00:00
|
|
|
"Number of currently active worker instances"
|
2024-09-09 09:12:56 +00:00
|
|
|
|
|
|
|
|
|
2024-10-02 11:31:33 +00:00
|
|
|
template updateMetricsImpl*(ctx: BeaconCtxRef) =
|
2024-10-03 20:19:11 +00:00
|
|
|
metrics.set(beacon_base, ctx.dbStateBlockNumber().int64)
|
|
|
|
|
metrics.set(beacon_coupler, ctx.layout.coupler.int64)
|
|
|
|
|
metrics.set(beacon_dangling, ctx.layout.dangling.int64)
|
|
|
|
|
metrics.set(beacon_end, ctx.layout.endBn.int64)
|
|
|
|
|
metrics.set(beacon_final, ctx.lhc.final.header.number.int64)
|
Flare sync (#2627)
* Cosmetics, small fixes, add stashed headers verifier
* Remove direct `Era1` support
why:
Era1 is indirectly supported by using the import tool before syncing.
* Clarify database persistent save function.
why:
Function relied on the last saved state block number which was wrong.
It now relies on the tx-level. If it is 0, then data are saved directly.
Otherwise the task that owns the tx will do it.
* Extracted configuration constants into separate file
* Enable single peer mode for debugging
* Fix peer losing issue in multi-mode
details:
Running concurrent download peers was previously programmed as running
a batch downloading and storing ~8k headers and then leaving the `async`
function to be restarted by a scheduler.
This was unfortunate because of occasionally occurring long waiting
times for restart.
While the time gap until restarting were typically observed a few
millisecs, there were always a few outliers which well exceed several
seconds. This seemed to let remote peers run into timeouts.
* Prefix function names `unprocXxx()` and `stagedYyy()` by `headers`
why:
There will be other `unproc` and `staged` modules.
* Remove cruft, update logging
* Fix accounting issue
details:
When staging after fetching headers from the network, there was an off
by 1 error occurring when the result was by one smaller than requested.
Also, a whole range was mis-accounted when a peer was terminating
connection immediately after responding.
* Fix slow/error header accounting when fetching
why:
Originally set for detecting slow headers in a row, the counter
was wrongly extended to general errors.
* Ban peers for a while that respond with too few headers continuously
why:
Some peers only returned one header at a time. If these peers sit on a
farm, they might collectively slow down the download process.
* Update RPC beacon header updater
why:
Old function hook has slightly changed its meaning since it was used
for snap sync. Also, the old hook is used by other functions already.
* Limit number of peers or set to single peer mode
details:
Merge several concepts, single peer mode being one of it.
* Some code clean up, fixings for removing of compiler warnings
* De-noise header fetch related sources
why:
Header download looks relatively stable, so general debugging is not
needed, anymore. This is the equivalent of removing the scaffold from
the part of the building where work has completed.
* More clean up and code prettification for headers stuff
* Implement body fetch and block import
details:
Available headers are used stage blocks by combining existing headers
with newly fetched blocks. Then these blocks are imported/executed via
`persistBlocks()`.
* Logger cosmetics and cleanup
* Remove staged block queue debugging
details:
Feature still available, just not executed anymore
* Docu, logging update
* Update/simplify `runDaemon()`
* Re-calibrate block body requests and soft config for import blocks batch
why:
* For fetching, larger fetch requests are mostly truncated anyway on
MainNet.
* For executing, smaller batch sizes reduce the memory needed for the
price of longer execution times.
* Update metrics counters
* Docu update
* Some fixes, formatting updates, etc.
* Update `borrowed` type: uint -. uint64
also:
Always convert to `uint64` rather than `uint` where appropriate
2024-09-27 15:07:42 +00:00
|
|
|
|
2024-10-03 20:19:11 +00:00
|
|
|
metrics.set(beacon_header_lists_staged, ctx.headersStagedQueueLen())
|
2024-10-02 11:31:33 +00:00
|
|
|
metrics.set(beacon_headers_unprocessed,
|
Flare sync (#2627)
* Cosmetics, small fixes, add stashed headers verifier
* Remove direct `Era1` support
why:
Era1 is indirectly supported by using the import tool before syncing.
* Clarify database persistent save function.
why:
Function relied on the last saved state block number which was wrong.
It now relies on the tx-level. If it is 0, then data are saved directly.
Otherwise the task that owns the tx will do it.
* Extracted configuration constants into separate file
* Enable single peer mode for debugging
* Fix peer losing issue in multi-mode
details:
Running concurrent download peers was previously programmed as running
a batch downloading and storing ~8k headers and then leaving the `async`
function to be restarted by a scheduler.
This was unfortunate because of occasionally occurring long waiting
times for restart.
While the time gap until restarting were typically observed a few
millisecs, there were always a few outliers which well exceed several
seconds. This seemed to let remote peers run into timeouts.
* Prefix function names `unprocXxx()` and `stagedYyy()` by `headers`
why:
There will be other `unproc` and `staged` modules.
* Remove cruft, update logging
* Fix accounting issue
details:
When staging after fetching headers from the network, there was an off
by 1 error occurring when the result was by one smaller than requested.
Also, a whole range was mis-accounted when a peer was terminating
connection immediately after responding.
* Fix slow/error header accounting when fetching
why:
Originally set for detecting slow headers in a row, the counter
was wrongly extended to general errors.
* Ban peers for a while that respond with too few headers continuously
why:
Some peers only returned one header at a time. If these peers sit on a
farm, they might collectively slow down the download process.
* Update RPC beacon header updater
why:
Old function hook has slightly changed its meaning since it was used
for snap sync. Also, the old hook is used by other functions already.
* Limit number of peers or set to single peer mode
details:
Merge several concepts, single peer mode being one of it.
* Some code clean up, fixings for removing of compiler warnings
* De-noise header fetch related sources
why:
Header download looks relatively stable, so general debugging is not
needed, anymore. This is the equivalent of removing the scaffold from
the part of the building where work has completed.
* More clean up and code prettification for headers stuff
* Implement body fetch and block import
details:
Available headers are used stage blocks by combining existing headers
with newly fetched blocks. Then these blocks are imported/executed via
`persistBlocks()`.
* Logger cosmetics and cleanup
* Remove staged block queue debugging
details:
Feature still available, just not executed anymore
* Docu, logging update
* Update/simplify `runDaemon()`
* Re-calibrate block body requests and soft config for import blocks batch
why:
* For fetching, larger fetch requests are mostly truncated anyway on
MainNet.
* For executing, smaller batch sizes reduce the memory needed for the
price of longer execution times.
* Update metrics counters
* Docu update
* Some fixes, formatting updates, etc.
* Update `borrowed` type: uint -. uint64
also:
Always convert to `uint64` rather than `uint` where appropriate
2024-09-27 15:07:42 +00:00
|
|
|
(ctx.headersUnprocTotal() + ctx.headersUnprocBorrowed()).int64)
|
|
|
|
|
|
2024-10-03 20:19:11 +00:00
|
|
|
metrics.set(beacon_block_lists_staged, ctx.blocksStagedQueueLen())
|
2024-10-02 11:31:33 +00:00
|
|
|
metrics.set(beacon_blocks_unprocessed,
|
Flare sync (#2627)
* Cosmetics, small fixes, add stashed headers verifier
* Remove direct `Era1` support
why:
Era1 is indirectly supported by using the import tool before syncing.
* Clarify database persistent save function.
why:
Function relied on the last saved state block number which was wrong.
It now relies on the tx-level. If it is 0, then data are saved directly.
Otherwise the task that owns the tx will do it.
* Extracted configuration constants into separate file
* Enable single peer mode for debugging
* Fix peer losing issue in multi-mode
details:
Running concurrent download peers was previously programmed as running
a batch downloading and storing ~8k headers and then leaving the `async`
function to be restarted by a scheduler.
This was unfortunate because of occasionally occurring long waiting
times for restart.
While the time gap until restarting were typically observed a few
millisecs, there were always a few outliers which well exceed several
seconds. This seemed to let remote peers run into timeouts.
* Prefix function names `unprocXxx()` and `stagedYyy()` by `headers`
why:
There will be other `unproc` and `staged` modules.
* Remove cruft, update logging
* Fix accounting issue
details:
When staging after fetching headers from the network, there was an off
by 1 error occurring when the result was by one smaller than requested.
Also, a whole range was mis-accounted when a peer was terminating
connection immediately after responding.
* Fix slow/error header accounting when fetching
why:
Originally set for detecting slow headers in a row, the counter
was wrongly extended to general errors.
* Ban peers for a while that respond with too few headers continuously
why:
Some peers only returned one header at a time. If these peers sit on a
farm, they might collectively slow down the download process.
* Update RPC beacon header updater
why:
Old function hook has slightly changed its meaning since it was used
for snap sync. Also, the old hook is used by other functions already.
* Limit number of peers or set to single peer mode
details:
Merge several concepts, single peer mode being one of it.
* Some code clean up, fixings for removing of compiler warnings
* De-noise header fetch related sources
why:
Header download looks relatively stable, so general debugging is not
needed, anymore. This is the equivalent of removing the scaffold from
the part of the building where work has completed.
* More clean up and code prettification for headers stuff
* Implement body fetch and block import
details:
Available headers are used stage blocks by combining existing headers
with newly fetched blocks. Then these blocks are imported/executed via
`persistBlocks()`.
* Logger cosmetics and cleanup
* Remove staged block queue debugging
details:
Feature still available, just not executed anymore
* Docu, logging update
* Update/simplify `runDaemon()`
* Re-calibrate block body requests and soft config for import blocks batch
why:
* For fetching, larger fetch requests are mostly truncated anyway on
MainNet.
* For executing, smaller batch sizes reduce the memory needed for the
price of longer execution times.
* Update metrics counters
* Docu update
* Some fixes, formatting updates, etc.
* Update `borrowed` type: uint -. uint64
also:
Always convert to `uint64` rather than `uint` where appropriate
2024-09-27 15:07:42 +00:00
|
|
|
(ctx.blocksUnprocTotal() + ctx.blocksUnprocBorrowed()).int64)
|
|
|
|
|
|
2024-10-03 20:19:11 +00:00
|
|
|
metrics.set(beacon_buddies, ctx.pool.nBuddies)
|
2024-09-09 09:12:56 +00:00
|
|
|
|
|
|
|
|
# End
|