nimbus-eth1/nimbus/db/ledger/base_iterators.nim

93 lines
2.6 KiB
Nim
Raw Normal View History

Core db aristo hasher profiling and timing improvement (#1938) * Explicitly use shared `Kvt` table on `Ledger` and `Clique` lookup. why: Speeds up lookup time with `Aristo` backend. For writing `Clique` data, the `Companion` model allows to write `Clique` data past the database locked by evm transactions. * Implement `CoreDb` profiling with API tracking why: Chasing time spent per APT procs ... * Implement `Ledger` profiling with API tracking why: Chasing time spent per APT procs ... * Always hashify when commiting or storing why: A dirty cache makes no sense when committing * Make sure that a zero key is created when adding/updating vertices why: This is an error fix mainly for edge cases. A typical error was that the root key got deleted when there were only a few vertices left on the DB. * Need all created and changed vertices zero-keyed on the cache why: A zero key (i.e. empty Merkle hash) indicates that a vertex key needs to be updated. This would not be needed immediately after a merge as there is an actual leaf path on the cache layer. But after subsequent merge and delete operations this information might get blurred. * Re-org hashing algorithm why: Apart from errors, the previous implementation was too slow for two reasons: + some control hashes were calculated for debugging (now all verification is done in `aristo_check` module) + the leaf paths stored on the cache are used to build the labelling (aka hashing) schedule; there paths were accumulated over successive hash sessions although it is clear that all keys were generated, already
2023-12-12 17:47:41 +00:00
# Nimbus
# Copyright (c) 2023-2024 Status Research & Development GmbH
Core db aristo hasher profiling and timing improvement (#1938) * Explicitly use shared `Kvt` table on `Ledger` and `Clique` lookup. why: Speeds up lookup time with `Aristo` backend. For writing `Clique` data, the `Companion` model allows to write `Clique` data past the database locked by evm transactions. * Implement `CoreDb` profiling with API tracking why: Chasing time spent per APT procs ... * Implement `Ledger` profiling with API tracking why: Chasing time spent per APT procs ... * Always hashify when commiting or storing why: A dirty cache makes no sense when committing * Make sure that a zero key is created when adding/updating vertices why: This is an error fix mainly for edge cases. A typical error was that the root key got deleted when there were only a few vertices left on the DB. * Need all created and changed vertices zero-keyed on the cache why: A zero key (i.e. empty Merkle hash) indicates that a vertex key needs to be updated. This would not be needed immediately after a merge as there is an actual leaf path on the cache layer. But after subsequent merge and delete operations this information might get blurred. * Re-org hashing algorithm why: Apart from errors, the previous implementation was too slow for two reasons: + some control hashes were calculated for debugging (now all verification is done in `aristo_check` module) + the leaf paths stored on the cache are used to build the labelling (aka hashing) schedule; there paths were accumulated over successive hash sessions although it is clear that all keys were generated, already
2023-12-12 17:47:41 +00:00
# Licensed under either of
# * Apache License, version 2.0, ([LICENSE-APACHE](LICENSE-APACHE) or
# http://www.apache.org/licenses/LICENSE-2.0)
# * MIT license ([LICENSE-MIT](LICENSE-MIT) or
# http://opensource.org/licenses/MIT)
# at your option. This file may not be copied, modified, or distributed
# except according to those terms.
{.push raises: [].}
import
eth/common,
../core_db,
./backend/[accounts_ledger, accounts_ledger_desc],
Core db aristo hasher profiling and timing improvement (#1938) * Explicitly use shared `Kvt` table on `Ledger` and `Clique` lookup. why: Speeds up lookup time with `Aristo` backend. For writing `Clique` data, the `Companion` model allows to write `Clique` data past the database locked by evm transactions. * Implement `CoreDb` profiling with API tracking why: Chasing time spent per APT procs ... * Implement `Ledger` profiling with API tracking why: Chasing time spent per APT procs ... * Always hashify when commiting or storing why: A dirty cache makes no sense when committing * Make sure that a zero key is created when adding/updating vertices why: This is an error fix mainly for edge cases. A typical error was that the root key got deleted when there were only a few vertices left on the DB. * Need all created and changed vertices zero-keyed on the cache why: A zero key (i.e. empty Merkle hash) indicates that a vertex key needs to be updated. This would not be needed immediately after a merge as there is an actual leaf path on the cache layer. But after subsequent merge and delete operations this information might get blurred. * Re-org hashing algorithm why: Apart from errors, the previous implementation was too slow for two reasons: + some control hashes were calculated for debugging (now all verification is done in `aristo_check` module) + the leaf paths stored on the cache are used to build the labelling (aka hashing) schedule; there paths were accumulated over successive hash sessions although it is clear that all keys were generated, already
2023-12-12 17:47:41 +00:00
./base/api_tracking,
./base
when LedgerEnableApiTracking:
import
std/times,
chronicles
const
apiTxt = LedgerApiTxt
func `$`(a: EthAddress): string {.used.} = a.toStr
# ------------------------------------------------------------------------------
# Public iterators
# ------------------------------------------------------------------------------
iterator accounts*(ldg: LedgerRef): Account =
ldg.beginTrackApi LdgAccountsIt
case ldg.ldgType:
of LedgerCache:
for w in ldg.AccountsLedgerRef.accountsIt():
yield w
else:
raiseAssert: "Unsupported ledger type: " & $ldg.ldgType
ldg.ifTrackApi: debug apiTxt, api, elapsed
Core db aristo hasher profiling and timing improvement (#1938) * Explicitly use shared `Kvt` table on `Ledger` and `Clique` lookup. why: Speeds up lookup time with `Aristo` backend. For writing `Clique` data, the `Companion` model allows to write `Clique` data past the database locked by evm transactions. * Implement `CoreDb` profiling with API tracking why: Chasing time spent per APT procs ... * Implement `Ledger` profiling with API tracking why: Chasing time spent per APT procs ... * Always hashify when commiting or storing why: A dirty cache makes no sense when committing * Make sure that a zero key is created when adding/updating vertices why: This is an error fix mainly for edge cases. A typical error was that the root key got deleted when there were only a few vertices left on the DB. * Need all created and changed vertices zero-keyed on the cache why: A zero key (i.e. empty Merkle hash) indicates that a vertex key needs to be updated. This would not be needed immediately after a merge as there is an actual leaf path on the cache layer. But after subsequent merge and delete operations this information might get blurred. * Re-org hashing algorithm why: Apart from errors, the previous implementation was too slow for two reasons: + some control hashes were calculated for debugging (now all verification is done in `aristo_check` module) + the leaf paths stored on the cache are used to build the labelling (aka hashing) schedule; there paths were accumulated over successive hash sessions although it is clear that all keys were generated, already
2023-12-12 17:47:41 +00:00
iterator addresses*(ldg: LedgerRef): EthAddress =
ldg.beginTrackApi LdgAdressesIt
case ldg.ldgType:
of LedgerCache:
for w in ldg.AccountsLedgerRef.addressesIt():
yield w
else:
raiseAssert: "Unsupported ledger type: " & $ldg.ldgType
ldg.ifTrackApi: debug apiTxt, api, elapsed
Core db aristo hasher profiling and timing improvement (#1938) * Explicitly use shared `Kvt` table on `Ledger` and `Clique` lookup. why: Speeds up lookup time with `Aristo` backend. For writing `Clique` data, the `Companion` model allows to write `Clique` data past the database locked by evm transactions. * Implement `CoreDb` profiling with API tracking why: Chasing time spent per APT procs ... * Implement `Ledger` profiling with API tracking why: Chasing time spent per APT procs ... * Always hashify when commiting or storing why: A dirty cache makes no sense when committing * Make sure that a zero key is created when adding/updating vertices why: This is an error fix mainly for edge cases. A typical error was that the root key got deleted when there were only a few vertices left on the DB. * Need all created and changed vertices zero-keyed on the cache why: A zero key (i.e. empty Merkle hash) indicates that a vertex key needs to be updated. This would not be needed immediately after a merge as there is an actual leaf path on the cache layer. But after subsequent merge and delete operations this information might get blurred. * Re-org hashing algorithm why: Apart from errors, the previous implementation was too slow for two reasons: + some control hashes were calculated for debugging (now all verification is done in `aristo_check` module) + the leaf paths stored on the cache are used to build the labelling (aka hashing) schedule; there paths were accumulated over successive hash sessions although it is clear that all keys were generated, already
2023-12-12 17:47:41 +00:00
iterator cachedStorage*(ldg: LedgerRef, eAddr: EthAddress): (UInt256,UInt256) =
ldg.beginTrackApi LdgCachedStorageIt
case ldg.ldgType:
of LedgerCache:
for w in ldg.AccountsLedgerRef.cachedStorageIt(eAddr):
yield w
else:
raiseAssert: "Unsupported ledger type: " & $ldg.ldgType
ldg.ifTrackApi: debug apiTxt, api, elapsed, eAddr
Core db aristo hasher profiling and timing improvement (#1938) * Explicitly use shared `Kvt` table on `Ledger` and `Clique` lookup. why: Speeds up lookup time with `Aristo` backend. For writing `Clique` data, the `Companion` model allows to write `Clique` data past the database locked by evm transactions. * Implement `CoreDb` profiling with API tracking why: Chasing time spent per APT procs ... * Implement `Ledger` profiling with API tracking why: Chasing time spent per APT procs ... * Always hashify when commiting or storing why: A dirty cache makes no sense when committing * Make sure that a zero key is created when adding/updating vertices why: This is an error fix mainly for edge cases. A typical error was that the root key got deleted when there were only a few vertices left on the DB. * Need all created and changed vertices zero-keyed on the cache why: A zero key (i.e. empty Merkle hash) indicates that a vertex key needs to be updated. This would not be needed immediately after a merge as there is an actual leaf path on the cache layer. But after subsequent merge and delete operations this information might get blurred. * Re-org hashing algorithm why: Apart from errors, the previous implementation was too slow for two reasons: + some control hashes were calculated for debugging (now all verification is done in `aristo_check` module) + the leaf paths stored on the cache are used to build the labelling (aka hashing) schedule; there paths were accumulated over successive hash sessions although it is clear that all keys were generated, already
2023-12-12 17:47:41 +00:00
iterator pairs*(ldg: LedgerRef): (EthAddress,Account) =
ldg.beginTrackApi LdgPairsIt
case ldg.ldgType:
of LedgerCache:
for w in ldg.AccountsLedgerRef.pairsIt():
yield w
else:
raiseAssert: "Unsupported ledger type: " & $ldg.ldgType
ldg.ifTrackApi: debug apiTxt, api, elapsed
Core db aristo hasher profiling and timing improvement (#1938) * Explicitly use shared `Kvt` table on `Ledger` and `Clique` lookup. why: Speeds up lookup time with `Aristo` backend. For writing `Clique` data, the `Companion` model allows to write `Clique` data past the database locked by evm transactions. * Implement `CoreDb` profiling with API tracking why: Chasing time spent per APT procs ... * Implement `Ledger` profiling with API tracking why: Chasing time spent per APT procs ... * Always hashify when commiting or storing why: A dirty cache makes no sense when committing * Make sure that a zero key is created when adding/updating vertices why: This is an error fix mainly for edge cases. A typical error was that the root key got deleted when there were only a few vertices left on the DB. * Need all created and changed vertices zero-keyed on the cache why: A zero key (i.e. empty Merkle hash) indicates that a vertex key needs to be updated. This would not be needed immediately after a merge as there is an actual leaf path on the cache layer. But after subsequent merge and delete operations this information might get blurred. * Re-org hashing algorithm why: Apart from errors, the previous implementation was too slow for two reasons: + some control hashes were calculated for debugging (now all verification is done in `aristo_check` module) + the leaf paths stored on the cache are used to build the labelling (aka hashing) schedule; there paths were accumulated over successive hash sessions although it is clear that all keys were generated, already
2023-12-12 17:47:41 +00:00
iterator storage*(
ldg: LedgerRef;
eAddr: EthAddress;
): (UInt256,UInt256) =
Core db aristo hasher profiling and timing improvement (#1938) * Explicitly use shared `Kvt` table on `Ledger` and `Clique` lookup. why: Speeds up lookup time with `Aristo` backend. For writing `Clique` data, the `Companion` model allows to write `Clique` data past the database locked by evm transactions. * Implement `CoreDb` profiling with API tracking why: Chasing time spent per APT procs ... * Implement `Ledger` profiling with API tracking why: Chasing time spent per APT procs ... * Always hashify when commiting or storing why: A dirty cache makes no sense when committing * Make sure that a zero key is created when adding/updating vertices why: This is an error fix mainly for edge cases. A typical error was that the root key got deleted when there were only a few vertices left on the DB. * Need all created and changed vertices zero-keyed on the cache why: A zero key (i.e. empty Merkle hash) indicates that a vertex key needs to be updated. This would not be needed immediately after a merge as there is an actual leaf path on the cache layer. But after subsequent merge and delete operations this information might get blurred. * Re-org hashing algorithm why: Apart from errors, the previous implementation was too slow for two reasons: + some control hashes were calculated for debugging (now all verification is done in `aristo_check` module) + the leaf paths stored on the cache are used to build the labelling (aka hashing) schedule; there paths were accumulated over successive hash sessions although it is clear that all keys were generated, already
2023-12-12 17:47:41 +00:00
ldg.beginTrackApi LdgStorageIt
case ldg.ldgType:
of LedgerCache:
for w in ldg.AccountsLedgerRef.storageIt(eAddr):
yield w
else:
raiseAssert: "Unsupported ledger type: " & $ldg.ldgType
ldg.ifTrackApi: debug apiTxt, api, elapsed, eAddr
Core db aristo hasher profiling and timing improvement (#1938) * Explicitly use shared `Kvt` table on `Ledger` and `Clique` lookup. why: Speeds up lookup time with `Aristo` backend. For writing `Clique` data, the `Companion` model allows to write `Clique` data past the database locked by evm transactions. * Implement `CoreDb` profiling with API tracking why: Chasing time spent per APT procs ... * Implement `Ledger` profiling with API tracking why: Chasing time spent per APT procs ... * Always hashify when commiting or storing why: A dirty cache makes no sense when committing * Make sure that a zero key is created when adding/updating vertices why: This is an error fix mainly for edge cases. A typical error was that the root key got deleted when there were only a few vertices left on the DB. * Need all created and changed vertices zero-keyed on the cache why: A zero key (i.e. empty Merkle hash) indicates that a vertex key needs to be updated. This would not be needed immediately after a merge as there is an actual leaf path on the cache layer. But after subsequent merge and delete operations this information might get blurred. * Re-org hashing algorithm why: Apart from errors, the previous implementation was too slow for two reasons: + some control hashes were calculated for debugging (now all verification is done in `aristo_check` module) + the leaf paths stored on the cache are used to build the labelling (aka hashing) schedule; there paths were accumulated over successive hash sessions although it is clear that all keys were generated, already
2023-12-12 17:47:41 +00:00
# ------------------------------------------------------------------------------
# End
# ------------------------------------------------------------------------------