2022-10-10 02:31:28 +00:00
|
|
|
# Nimbus - Ethereum Wire Protocol
|
Sync: Support for `eth/65` protocol
This patch adds the `eth/65` protocol, documented at
https://github.com/ethereum/devp2p/blob/master/caps/eth.md.
This is an intentionally simple patch, designed to not break, change or depend
on other functionality much, so that the "_old_ sync" methods can be run
usefully again and observed. This patch isn't "new sync" (a different set of
sync algorithms), but it is one of the foundations.
For a while now Nimbus Eth1 only supported protocol `eth/63`. But that's
obsolete, and very few nodes still support it. This meant Nimbus Eth1 would
make slow progress trying to sync, as most up to date clients rejected it.
The current specification is `eth/66`, and the functionality we really need is
in `eth/64`.
So why `eth/65`?
- `eth/64` is essential because of the `forkId` feature. But `eth/64` is on
its way out as well. Many clients, especially the most up to date Geth
running the current hard-forks (Berlin/London) don't talk `eth/64` any more.
- `eth/66` is the current specification, but some clients don't talk `eth/66`
yet. We'd like to have the best peer connectivity during tests, and
currently everything that talks `eth/66` also talks `eth/65`.
- Nimbus Eth1 RLPx only talks one version at a time. (Without changes to the
RLPx module. When those go in we'll add `eth/64..eth/66` for greater peer
reach and testing the `eth/66` behaviour. For simplicity and decoupling,
this patch contains just one version, the most useful.)
What are `eth/64` and `eth/65`?
- `eth/64` (EIP-2364) added `forkId` which allows nodes to distinguish between
Ethereum (ETH) and Ethereum Classic (ETC) blockchains, which share the same
genesis block. `forkId` also protects the system when a new hard fork is
going to be rolled out, by blocking interaction with out of date nodes. The
feature is required nowadays.
We send the right details to allow connection (this has been tested a lot),
but don't apply the full validation rules of EIP-2124/EIP-2364 in this patch.
It's to keep this patch simple (in its effects) and because those rules have
consequences best tested separately. In practice the other node will reject
us when we would reject it, so this is ok for testing, as long as it doesn't
get seriously deployed.
- `eth/65` added more efficient transaction pool methods.
- Then a later version of `eth/65` (without a new number) added typed
transactions, described in [EIP-2976](https://eips.ethereum.org/EIPS/eip-2976).
Why it's moved to `nimbus-eth1`:
- Mainly because `eth/64` onwards depend on the current state of block
synchronisation, as well as the blockchain's sequence of hard-fork block
numbers, both of which are part of `nimbus-eth1` run-time state. These
aren't available to pure `nim-eth` code. Although it would be possible to
add an API to let `nimbus-eth1` set these numbers, there isn't any point
because the protocol would still only be useful to `nimbus-eth1`.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
2021-07-21 20:00:03 +00:00
|
|
|
#
|
2024-02-19 11:46:48 +00:00
|
|
|
# Copyright (c) 2018-2024 Status Research & Development GmbH
|
Sync: Support for `eth/65` protocol
This patch adds the `eth/65` protocol, documented at
https://github.com/ethereum/devp2p/blob/master/caps/eth.md.
This is an intentionally simple patch, designed to not break, change or depend
on other functionality much, so that the "_old_ sync" methods can be run
usefully again and observed. This patch isn't "new sync" (a different set of
sync algorithms), but it is one of the foundations.
For a while now Nimbus Eth1 only supported protocol `eth/63`. But that's
obsolete, and very few nodes still support it. This meant Nimbus Eth1 would
make slow progress trying to sync, as most up to date clients rejected it.
The current specification is `eth/66`, and the functionality we really need is
in `eth/64`.
So why `eth/65`?
- `eth/64` is essential because of the `forkId` feature. But `eth/64` is on
its way out as well. Many clients, especially the most up to date Geth
running the current hard-forks (Berlin/London) don't talk `eth/64` any more.
- `eth/66` is the current specification, but some clients don't talk `eth/66`
yet. We'd like to have the best peer connectivity during tests, and
currently everything that talks `eth/66` also talks `eth/65`.
- Nimbus Eth1 RLPx only talks one version at a time. (Without changes to the
RLPx module. When those go in we'll add `eth/64..eth/66` for greater peer
reach and testing the `eth/66` behaviour. For simplicity and decoupling,
this patch contains just one version, the most useful.)
What are `eth/64` and `eth/65`?
- `eth/64` (EIP-2364) added `forkId` which allows nodes to distinguish between
Ethereum (ETH) and Ethereum Classic (ETC) blockchains, which share the same
genesis block. `forkId` also protects the system when a new hard fork is
going to be rolled out, by blocking interaction with out of date nodes. The
feature is required nowadays.
We send the right details to allow connection (this has been tested a lot),
but don't apply the full validation rules of EIP-2124/EIP-2364 in this patch.
It's to keep this patch simple (in its effects) and because those rules have
consequences best tested separately. In practice the other node will reject
us when we would reject it, so this is ok for testing, as long as it doesn't
get seriously deployed.
- `eth/65` added more efficient transaction pool methods.
- Then a later version of `eth/65` (without a new number) added typed
transactions, described in [EIP-2976](https://eips.ethereum.org/EIPS/eip-2976).
Why it's moved to `nimbus-eth1`:
- Mainly because `eth/64` onwards depend on the current state of block
synchronisation, as well as the blockchain's sequence of hard-fork block
numbers, both of which are part of `nimbus-eth1` run-time state. These
aren't available to pure `nim-eth` code. Although it would be possible to
add an API to let `nimbus-eth1` set these numbers, there isn't any point
because the protocol would still only be useful to `nimbus-eth1`.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
2021-07-21 20:00:03 +00:00
|
|
|
# Licensed under either of
|
2022-05-13 16:30:10 +00:00
|
|
|
# * Apache License, version 2.0, ([LICENSE-APACHE](LICENSE-APACHE) or
|
|
|
|
# http://www.apache.org/licenses/LICENSE-2.0)
|
|
|
|
# * MIT license ([LICENSE-MIT](LICENSE-MIT) or
|
|
|
|
# http://opensource.org/licenses/MIT)
|
|
|
|
# at your option. This file may not be copied, modified, or distributed
|
|
|
|
# except according to those terms.
|
|
|
|
|
2022-10-10 02:31:28 +00:00
|
|
|
## This module implements Ethereum Wire Protocol version 66, `eth/66`.
|
|
|
|
## Specification:
|
|
|
|
## `eth/66 <https://github.com/ethereum/devp2p/blob/master/caps/eth.md>`_
|
Sync: Support for `eth/65` protocol
This patch adds the `eth/65` protocol, documented at
https://github.com/ethereum/devp2p/blob/master/caps/eth.md.
This is an intentionally simple patch, designed to not break, change or depend
on other functionality much, so that the "_old_ sync" methods can be run
usefully again and observed. This patch isn't "new sync" (a different set of
sync algorithms), but it is one of the foundations.
For a while now Nimbus Eth1 only supported protocol `eth/63`. But that's
obsolete, and very few nodes still support it. This meant Nimbus Eth1 would
make slow progress trying to sync, as most up to date clients rejected it.
The current specification is `eth/66`, and the functionality we really need is
in `eth/64`.
So why `eth/65`?
- `eth/64` is essential because of the `forkId` feature. But `eth/64` is on
its way out as well. Many clients, especially the most up to date Geth
running the current hard-forks (Berlin/London) don't talk `eth/64` any more.
- `eth/66` is the current specification, but some clients don't talk `eth/66`
yet. We'd like to have the best peer connectivity during tests, and
currently everything that talks `eth/66` also talks `eth/65`.
- Nimbus Eth1 RLPx only talks one version at a time. (Without changes to the
RLPx module. When those go in we'll add `eth/64..eth/66` for greater peer
reach and testing the `eth/66` behaviour. For simplicity and decoupling,
this patch contains just one version, the most useful.)
What are `eth/64` and `eth/65`?
- `eth/64` (EIP-2364) added `forkId` which allows nodes to distinguish between
Ethereum (ETH) and Ethereum Classic (ETC) blockchains, which share the same
genesis block. `forkId` also protects the system when a new hard fork is
going to be rolled out, by blocking interaction with out of date nodes. The
feature is required nowadays.
We send the right details to allow connection (this has been tested a lot),
but don't apply the full validation rules of EIP-2124/EIP-2364 in this patch.
It's to keep this patch simple (in its effects) and because those rules have
consequences best tested separately. In practice the other node will reject
us when we would reject it, so this is ok for testing, as long as it doesn't
get seriously deployed.
- `eth/65` added more efficient transaction pool methods.
- Then a later version of `eth/65` (without a new number) added typed
transactions, described in [EIP-2976](https://eips.ethereum.org/EIPS/eip-2976).
Why it's moved to `nimbus-eth1`:
- Mainly because `eth/64` onwards depend on the current state of block
synchronisation, as well as the blockchain's sequence of hard-fork block
numbers, both of which are part of `nimbus-eth1` run-time state. These
aren't available to pure `nim-eth` code. Although it would be possible to
add an API to let `nimbus-eth1` set these numbers, there isn't any point
because the protocol would still only be useful to `nimbus-eth1`.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
2021-07-21 20:00:03 +00:00
|
|
|
|
|
|
|
import
|
2022-10-10 02:31:28 +00:00
|
|
|
stint,
|
2022-05-17 11:09:49 +00:00
|
|
|
chronicles,
|
|
|
|
chronos,
|
2022-10-10 02:31:28 +00:00
|
|
|
eth/[common, p2p, p2p/private/p2p_types],
|
2022-05-17 11:09:49 +00:00
|
|
|
stew/byteutils,
|
2022-10-10 02:31:28 +00:00
|
|
|
./trace_config,
|
|
|
|
./eth/eth_types,
|
|
|
|
../types,
|
2022-12-02 04:39:12 +00:00
|
|
|
../../utils/utils
|
2022-05-09 14:04:48 +00:00
|
|
|
|
2022-10-10 02:31:28 +00:00
|
|
|
export
|
|
|
|
eth_types
|
Sync: Support for `eth/65` protocol
This patch adds the `eth/65` protocol, documented at
https://github.com/ethereum/devp2p/blob/master/caps/eth.md.
This is an intentionally simple patch, designed to not break, change or depend
on other functionality much, so that the "_old_ sync" methods can be run
usefully again and observed. This patch isn't "new sync" (a different set of
sync algorithms), but it is one of the foundations.
For a while now Nimbus Eth1 only supported protocol `eth/63`. But that's
obsolete, and very few nodes still support it. This meant Nimbus Eth1 would
make slow progress trying to sync, as most up to date clients rejected it.
The current specification is `eth/66`, and the functionality we really need is
in `eth/64`.
So why `eth/65`?
- `eth/64` is essential because of the `forkId` feature. But `eth/64` is on
its way out as well. Many clients, especially the most up to date Geth
running the current hard-forks (Berlin/London) don't talk `eth/64` any more.
- `eth/66` is the current specification, but some clients don't talk `eth/66`
yet. We'd like to have the best peer connectivity during tests, and
currently everything that talks `eth/66` also talks `eth/65`.
- Nimbus Eth1 RLPx only talks one version at a time. (Without changes to the
RLPx module. When those go in we'll add `eth/64..eth/66` for greater peer
reach and testing the `eth/66` behaviour. For simplicity and decoupling,
this patch contains just one version, the most useful.)
What are `eth/64` and `eth/65`?
- `eth/64` (EIP-2364) added `forkId` which allows nodes to distinguish between
Ethereum (ETH) and Ethereum Classic (ETC) blockchains, which share the same
genesis block. `forkId` also protects the system when a new hard fork is
going to be rolled out, by blocking interaction with out of date nodes. The
feature is required nowadays.
We send the right details to allow connection (this has been tested a lot),
but don't apply the full validation rules of EIP-2124/EIP-2364 in this patch.
It's to keep this patch simple (in its effects) and because those rules have
consequences best tested separately. In practice the other node will reject
us when we would reject it, so this is ok for testing, as long as it doesn't
get seriously deployed.
- `eth/65` added more efficient transaction pool methods.
- Then a later version of `eth/65` (without a new number) added typed
transactions, described in [EIP-2976](https://eips.ethereum.org/EIPS/eip-2976).
Why it's moved to `nimbus-eth1`:
- Mainly because `eth/64` onwards depend on the current state of block
synchronisation, as well as the blockchain's sequence of hard-fork block
numbers, both of which are part of `nimbus-eth1` run-time state. These
aren't available to pure `nim-eth` code. Although it would be possible to
add an API to let `nimbus-eth1` set these numbers, there isn't any point
because the protocol would still only be useful to `nimbus-eth1`.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
2021-07-21 20:00:03 +00:00
|
|
|
|
2022-10-10 02:31:28 +00:00
|
|
|
logScope:
|
|
|
|
topics = "eth66"
|
2021-07-26 22:28:27 +00:00
|
|
|
|
2023-01-30 22:10:23 +00:00
|
|
|
static:
|
|
|
|
const stopCompilerGossip {.used.} = Hash256().toHex
|
|
|
|
|
Sync: Support for `eth/65` protocol
This patch adds the `eth/65` protocol, documented at
https://github.com/ethereum/devp2p/blob/master/caps/eth.md.
This is an intentionally simple patch, designed to not break, change or depend
on other functionality much, so that the "_old_ sync" methods can be run
usefully again and observed. This patch isn't "new sync" (a different set of
sync algorithms), but it is one of the foundations.
For a while now Nimbus Eth1 only supported protocol `eth/63`. But that's
obsolete, and very few nodes still support it. This meant Nimbus Eth1 would
make slow progress trying to sync, as most up to date clients rejected it.
The current specification is `eth/66`, and the functionality we really need is
in `eth/64`.
So why `eth/65`?
- `eth/64` is essential because of the `forkId` feature. But `eth/64` is on
its way out as well. Many clients, especially the most up to date Geth
running the current hard-forks (Berlin/London) don't talk `eth/64` any more.
- `eth/66` is the current specification, but some clients don't talk `eth/66`
yet. We'd like to have the best peer connectivity during tests, and
currently everything that talks `eth/66` also talks `eth/65`.
- Nimbus Eth1 RLPx only talks one version at a time. (Without changes to the
RLPx module. When those go in we'll add `eth/64..eth/66` for greater peer
reach and testing the `eth/66` behaviour. For simplicity and decoupling,
this patch contains just one version, the most useful.)
What are `eth/64` and `eth/65`?
- `eth/64` (EIP-2364) added `forkId` which allows nodes to distinguish between
Ethereum (ETH) and Ethereum Classic (ETC) blockchains, which share the same
genesis block. `forkId` also protects the system when a new hard fork is
going to be rolled out, by blocking interaction with out of date nodes. The
feature is required nowadays.
We send the right details to allow connection (this has been tested a lot),
but don't apply the full validation rules of EIP-2124/EIP-2364 in this patch.
It's to keep this patch simple (in its effects) and because those rules have
consequences best tested separately. In practice the other node will reject
us when we would reject it, so this is ok for testing, as long as it doesn't
get seriously deployed.
- `eth/65` added more efficient transaction pool methods.
- Then a later version of `eth/65` (without a new number) added typed
transactions, described in [EIP-2976](https://eips.ethereum.org/EIPS/eip-2976).
Why it's moved to `nimbus-eth1`:
- Mainly because `eth/64` onwards depend on the current state of block
synchronisation, as well as the blockchain's sequence of hard-fork block
numbers, both of which are part of `nimbus-eth1` run-time state. These
aren't available to pure `nim-eth` code. Although it would be possible to
add an API to let `nimbus-eth1` set these numbers, there isn't any point
because the protocol would still only be useful to `nimbus-eth1`.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
2021-07-21 20:00:03 +00:00
|
|
|
const
|
2022-03-21 17:12:07 +00:00
|
|
|
ethVersion* = 66
|
2022-05-10 08:02:34 +00:00
|
|
|
prettyEthProtoName* = "[eth/" & $ethVersion & "]"
|
Sync: Support for `eth/65` protocol
This patch adds the `eth/65` protocol, documented at
https://github.com/ethereum/devp2p/blob/master/caps/eth.md.
This is an intentionally simple patch, designed to not break, change or depend
on other functionality much, so that the "_old_ sync" methods can be run
usefully again and observed. This patch isn't "new sync" (a different set of
sync algorithms), but it is one of the foundations.
For a while now Nimbus Eth1 only supported protocol `eth/63`. But that's
obsolete, and very few nodes still support it. This meant Nimbus Eth1 would
make slow progress trying to sync, as most up to date clients rejected it.
The current specification is `eth/66`, and the functionality we really need is
in `eth/64`.
So why `eth/65`?
- `eth/64` is essential because of the `forkId` feature. But `eth/64` is on
its way out as well. Many clients, especially the most up to date Geth
running the current hard-forks (Berlin/London) don't talk `eth/64` any more.
- `eth/66` is the current specification, but some clients don't talk `eth/66`
yet. We'd like to have the best peer connectivity during tests, and
currently everything that talks `eth/66` also talks `eth/65`.
- Nimbus Eth1 RLPx only talks one version at a time. (Without changes to the
RLPx module. When those go in we'll add `eth/64..eth/66` for greater peer
reach and testing the `eth/66` behaviour. For simplicity and decoupling,
this patch contains just one version, the most useful.)
What are `eth/64` and `eth/65`?
- `eth/64` (EIP-2364) added `forkId` which allows nodes to distinguish between
Ethereum (ETH) and Ethereum Classic (ETC) blockchains, which share the same
genesis block. `forkId` also protects the system when a new hard fork is
going to be rolled out, by blocking interaction with out of date nodes. The
feature is required nowadays.
We send the right details to allow connection (this has been tested a lot),
but don't apply the full validation rules of EIP-2124/EIP-2364 in this patch.
It's to keep this patch simple (in its effects) and because those rules have
consequences best tested separately. In practice the other node will reject
us when we would reject it, so this is ok for testing, as long as it doesn't
get seriously deployed.
- `eth/65` added more efficient transaction pool methods.
- Then a later version of `eth/65` (without a new number) added typed
transactions, described in [EIP-2976](https://eips.ethereum.org/EIPS/eip-2976).
Why it's moved to `nimbus-eth1`:
- Mainly because `eth/64` onwards depend on the current state of block
synchronisation, as well as the blockchain's sequence of hard-fork block
numbers, both of which are part of `nimbus-eth1` run-time state. These
aren't available to pure `nim-eth` code. Although it would be possible to
add an API to let `nimbus-eth1` set these numbers, there isn't any point
because the protocol would still only be useful to `nimbus-eth1`.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
2021-07-21 20:00:03 +00:00
|
|
|
|
2022-05-23 16:53:19 +00:00
|
|
|
# Pickeled tracer texts
|
|
|
|
trEthRecvReceived* =
|
|
|
|
"<< " & prettyEthProtoName & " Received "
|
2022-06-06 13:42:08 +00:00
|
|
|
trEthRecvReceivedBlockHeaders* =
|
|
|
|
trEthRecvReceived & "BlockHeaders (0x04)"
|
|
|
|
trEthRecvReceivedBlockBodies* =
|
|
|
|
trEthRecvReceived & "BlockBodies (0x06)"
|
|
|
|
|
2022-05-23 16:53:19 +00:00
|
|
|
trEthRecvProtocolViolation* =
|
|
|
|
"<< " & prettyEthProtoName & " Protocol violation, "
|
|
|
|
trEthRecvError* =
|
|
|
|
"<< " & prettyEthProtoName & " Error "
|
|
|
|
trEthRecvTimeoutWaiting* =
|
|
|
|
"<< " & prettyEthProtoName & " Timeout waiting "
|
2022-06-06 13:42:08 +00:00
|
|
|
trEthRecvDiscarding* =
|
|
|
|
"<< " & prettyEthProtoName & " Discarding "
|
|
|
|
|
2022-05-23 16:53:19 +00:00
|
|
|
trEthSendSending* =
|
|
|
|
">> " & prettyEthProtoName & " Sending "
|
2022-06-06 13:42:08 +00:00
|
|
|
trEthSendSendingGetBlockHeaders* =
|
|
|
|
trEthSendSending & "GetBlockHeaders (0x03)"
|
|
|
|
trEthSendSendingGetBlockBodies* =
|
|
|
|
trEthSendSending & "GetBlockBodies (0x05)"
|
|
|
|
|
2022-05-23 16:53:19 +00:00
|
|
|
trEthSendReplying* =
|
|
|
|
">> " & prettyEthProtoName & " Replying "
|
2022-06-06 13:42:08 +00:00
|
|
|
|
2022-05-23 16:53:19 +00:00
|
|
|
trEthSendDelaying* =
|
|
|
|
">> " & prettyEthProtoName & " Delaying "
|
2022-05-10 08:02:34 +00:00
|
|
|
|
2022-11-16 06:45:28 +00:00
|
|
|
trEthRecvNewBlock* =
|
|
|
|
"<< " & prettyEthProtoName & " Received NewBlock"
|
|
|
|
trEthRecvNewBlockHashes* =
|
|
|
|
"<< " & prettyEthProtoName & " Received NewBlockHashes"
|
|
|
|
trEthSendNewBlock* =
|
|
|
|
">> " & prettyEthProtoName & " Sending NewBlock"
|
|
|
|
trEthSendNewBlockHashes* =
|
|
|
|
">> " & prettyEthProtoName & " Sending NewBlockHashes"
|
2022-08-04 08:04:30 +00:00
|
|
|
|
2024-02-19 11:46:48 +00:00
|
|
|
template handleHandlerError(x: untyped) =
|
|
|
|
if x.isErr:
|
|
|
|
raise newException(EthP2PError, x.error)
|
|
|
|
|
2022-05-13 16:30:10 +00:00
|
|
|
p2pProtocol eth66(version = ethVersion,
|
|
|
|
rlpxName = "eth",
|
2023-01-20 15:01:29 +00:00
|
|
|
peerState = EthPeerState,
|
2022-10-10 02:31:28 +00:00
|
|
|
networkState = EthWireBase,
|
2022-05-13 16:30:10 +00:00
|
|
|
useRequestIds = true):
|
Sync: Support for `eth/65` protocol
This patch adds the `eth/65` protocol, documented at
https://github.com/ethereum/devp2p/blob/master/caps/eth.md.
This is an intentionally simple patch, designed to not break, change or depend
on other functionality much, so that the "_old_ sync" methods can be run
usefully again and observed. This patch isn't "new sync" (a different set of
sync algorithms), but it is one of the foundations.
For a while now Nimbus Eth1 only supported protocol `eth/63`. But that's
obsolete, and very few nodes still support it. This meant Nimbus Eth1 would
make slow progress trying to sync, as most up to date clients rejected it.
The current specification is `eth/66`, and the functionality we really need is
in `eth/64`.
So why `eth/65`?
- `eth/64` is essential because of the `forkId` feature. But `eth/64` is on
its way out as well. Many clients, especially the most up to date Geth
running the current hard-forks (Berlin/London) don't talk `eth/64` any more.
- `eth/66` is the current specification, but some clients don't talk `eth/66`
yet. We'd like to have the best peer connectivity during tests, and
currently everything that talks `eth/66` also talks `eth/65`.
- Nimbus Eth1 RLPx only talks one version at a time. (Without changes to the
RLPx module. When those go in we'll add `eth/64..eth/66` for greater peer
reach and testing the `eth/66` behaviour. For simplicity and decoupling,
this patch contains just one version, the most useful.)
What are `eth/64` and `eth/65`?
- `eth/64` (EIP-2364) added `forkId` which allows nodes to distinguish between
Ethereum (ETH) and Ethereum Classic (ETC) blockchains, which share the same
genesis block. `forkId` also protects the system when a new hard fork is
going to be rolled out, by blocking interaction with out of date nodes. The
feature is required nowadays.
We send the right details to allow connection (this has been tested a lot),
but don't apply the full validation rules of EIP-2124/EIP-2364 in this patch.
It's to keep this patch simple (in its effects) and because those rules have
consequences best tested separately. In practice the other node will reject
us when we would reject it, so this is ok for testing, as long as it doesn't
get seriously deployed.
- `eth/65` added more efficient transaction pool methods.
- Then a later version of `eth/65` (without a new number) added typed
transactions, described in [EIP-2976](https://eips.ethereum.org/EIPS/eip-2976).
Why it's moved to `nimbus-eth1`:
- Mainly because `eth/64` onwards depend on the current state of block
synchronisation, as well as the blockchain's sequence of hard-fork block
numbers, both of which are part of `nimbus-eth1` run-time state. These
aren't available to pure `nim-eth` code. Although it would be possible to
add an API to let `nimbus-eth1` set these numbers, there isn't any point
because the protocol would still only be useful to `nimbus-eth1`.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
2021-07-21 20:00:03 +00:00
|
|
|
|
|
|
|
onPeerConnected do (peer: Peer):
|
|
|
|
let
|
2022-10-10 02:31:28 +00:00
|
|
|
network = peer.network
|
|
|
|
ctx = peer.networkState
|
2024-02-19 11:46:48 +00:00
|
|
|
statusRes = ctx.getStatus()
|
|
|
|
handleHandlerError(statusRes)
|
|
|
|
let status = statusRes.get
|
Sync: Support for `eth/65` protocol
This patch adds the `eth/65` protocol, documented at
https://github.com/ethereum/devp2p/blob/master/caps/eth.md.
This is an intentionally simple patch, designed to not break, change or depend
on other functionality much, so that the "_old_ sync" methods can be run
usefully again and observed. This patch isn't "new sync" (a different set of
sync algorithms), but it is one of the foundations.
For a while now Nimbus Eth1 only supported protocol `eth/63`. But that's
obsolete, and very few nodes still support it. This meant Nimbus Eth1 would
make slow progress trying to sync, as most up to date clients rejected it.
The current specification is `eth/66`, and the functionality we really need is
in `eth/64`.
So why `eth/65`?
- `eth/64` is essential because of the `forkId` feature. But `eth/64` is on
its way out as well. Many clients, especially the most up to date Geth
running the current hard-forks (Berlin/London) don't talk `eth/64` any more.
- `eth/66` is the current specification, but some clients don't talk `eth/66`
yet. We'd like to have the best peer connectivity during tests, and
currently everything that talks `eth/66` also talks `eth/65`.
- Nimbus Eth1 RLPx only talks one version at a time. (Without changes to the
RLPx module. When those go in we'll add `eth/64..eth/66` for greater peer
reach and testing the `eth/66` behaviour. For simplicity and decoupling,
this patch contains just one version, the most useful.)
What are `eth/64` and `eth/65`?
- `eth/64` (EIP-2364) added `forkId` which allows nodes to distinguish between
Ethereum (ETH) and Ethereum Classic (ETC) blockchains, which share the same
genesis block. `forkId` also protects the system when a new hard fork is
going to be rolled out, by blocking interaction with out of date nodes. The
feature is required nowadays.
We send the right details to allow connection (this has been tested a lot),
but don't apply the full validation rules of EIP-2124/EIP-2364 in this patch.
It's to keep this patch simple (in its effects) and because those rules have
consequences best tested separately. In practice the other node will reject
us when we would reject it, so this is ok for testing, as long as it doesn't
get seriously deployed.
- `eth/65` added more efficient transaction pool methods.
- Then a later version of `eth/65` (without a new number) added typed
transactions, described in [EIP-2976](https://eips.ethereum.org/EIPS/eip-2976).
Why it's moved to `nimbus-eth1`:
- Mainly because `eth/64` onwards depend on the current state of block
synchronisation, as well as the blockchain's sequence of hard-fork block
numbers, both of which are part of `nimbus-eth1` run-time state. These
aren't available to pure `nim-eth` code. Although it would be possible to
add an API to let `nimbus-eth1` set these numbers, there isn't any point
because the protocol would still only be useful to `nimbus-eth1`.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
2021-07-21 20:00:03 +00:00
|
|
|
|
2022-05-23 16:53:19 +00:00
|
|
|
trace trEthSendSending & "Status (0x00)", peer,
|
2022-10-10 02:31:28 +00:00
|
|
|
td = status.totalDifficulty,
|
2022-11-16 06:45:28 +00:00
|
|
|
bestHash = short(status.bestBlockHash),
|
2022-10-10 02:31:28 +00:00
|
|
|
networkId = network.networkId,
|
2022-11-16 06:45:28 +00:00
|
|
|
genesis = short(status.genesisHash),
|
2022-10-10 02:31:28 +00:00
|
|
|
forkHash = status.forkId.forkHash.toHex,
|
|
|
|
forkNext = status.forkId.forkNext
|
2021-07-26 22:28:27 +00:00
|
|
|
|
2021-07-26 23:36:49 +00:00
|
|
|
let m = await peer.status(ethVersion,
|
Sync: Support for `eth/65` protocol
This patch adds the `eth/65` protocol, documented at
https://github.com/ethereum/devp2p/blob/master/caps/eth.md.
This is an intentionally simple patch, designed to not break, change or depend
on other functionality much, so that the "_old_ sync" methods can be run
usefully again and observed. This patch isn't "new sync" (a different set of
sync algorithms), but it is one of the foundations.
For a while now Nimbus Eth1 only supported protocol `eth/63`. But that's
obsolete, and very few nodes still support it. This meant Nimbus Eth1 would
make slow progress trying to sync, as most up to date clients rejected it.
The current specification is `eth/66`, and the functionality we really need is
in `eth/64`.
So why `eth/65`?
- `eth/64` is essential because of the `forkId` feature. But `eth/64` is on
its way out as well. Many clients, especially the most up to date Geth
running the current hard-forks (Berlin/London) don't talk `eth/64` any more.
- `eth/66` is the current specification, but some clients don't talk `eth/66`
yet. We'd like to have the best peer connectivity during tests, and
currently everything that talks `eth/66` also talks `eth/65`.
- Nimbus Eth1 RLPx only talks one version at a time. (Without changes to the
RLPx module. When those go in we'll add `eth/64..eth/66` for greater peer
reach and testing the `eth/66` behaviour. For simplicity and decoupling,
this patch contains just one version, the most useful.)
What are `eth/64` and `eth/65`?
- `eth/64` (EIP-2364) added `forkId` which allows nodes to distinguish between
Ethereum (ETH) and Ethereum Classic (ETC) blockchains, which share the same
genesis block. `forkId` also protects the system when a new hard fork is
going to be rolled out, by blocking interaction with out of date nodes. The
feature is required nowadays.
We send the right details to allow connection (this has been tested a lot),
but don't apply the full validation rules of EIP-2124/EIP-2364 in this patch.
It's to keep this patch simple (in its effects) and because those rules have
consequences best tested separately. In practice the other node will reject
us when we would reject it, so this is ok for testing, as long as it doesn't
get seriously deployed.
- `eth/65` added more efficient transaction pool methods.
- Then a later version of `eth/65` (without a new number) added typed
transactions, described in [EIP-2976](https://eips.ethereum.org/EIPS/eip-2976).
Why it's moved to `nimbus-eth1`:
- Mainly because `eth/64` onwards depend on the current state of block
synchronisation, as well as the blockchain's sequence of hard-fork block
numbers, both of which are part of `nimbus-eth1` run-time state. These
aren't available to pure `nim-eth` code. Although it would be possible to
add an API to let `nimbus-eth1` set these numbers, there isn't any point
because the protocol would still only be useful to `nimbus-eth1`.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
2021-07-21 20:00:03 +00:00
|
|
|
network.networkId,
|
2022-10-10 02:31:28 +00:00
|
|
|
status.totalDifficulty,
|
|
|
|
status.bestBlockHash,
|
|
|
|
status.genesisHash,
|
|
|
|
status.forkId,
|
Sync: Support for `eth/65` protocol
This patch adds the `eth/65` protocol, documented at
https://github.com/ethereum/devp2p/blob/master/caps/eth.md.
This is an intentionally simple patch, designed to not break, change or depend
on other functionality much, so that the "_old_ sync" methods can be run
usefully again and observed. This patch isn't "new sync" (a different set of
sync algorithms), but it is one of the foundations.
For a while now Nimbus Eth1 only supported protocol `eth/63`. But that's
obsolete, and very few nodes still support it. This meant Nimbus Eth1 would
make slow progress trying to sync, as most up to date clients rejected it.
The current specification is `eth/66`, and the functionality we really need is
in `eth/64`.
So why `eth/65`?
- `eth/64` is essential because of the `forkId` feature. But `eth/64` is on
its way out as well. Many clients, especially the most up to date Geth
running the current hard-forks (Berlin/London) don't talk `eth/64` any more.
- `eth/66` is the current specification, but some clients don't talk `eth/66`
yet. We'd like to have the best peer connectivity during tests, and
currently everything that talks `eth/66` also talks `eth/65`.
- Nimbus Eth1 RLPx only talks one version at a time. (Without changes to the
RLPx module. When those go in we'll add `eth/64..eth/66` for greater peer
reach and testing the `eth/66` behaviour. For simplicity and decoupling,
this patch contains just one version, the most useful.)
What are `eth/64` and `eth/65`?
- `eth/64` (EIP-2364) added `forkId` which allows nodes to distinguish between
Ethereum (ETH) and Ethereum Classic (ETC) blockchains, which share the same
genesis block. `forkId` also protects the system when a new hard fork is
going to be rolled out, by blocking interaction with out of date nodes. The
feature is required nowadays.
We send the right details to allow connection (this has been tested a lot),
but don't apply the full validation rules of EIP-2124/EIP-2364 in this patch.
It's to keep this patch simple (in its effects) and because those rules have
consequences best tested separately. In practice the other node will reject
us when we would reject it, so this is ok for testing, as long as it doesn't
get seriously deployed.
- `eth/65` added more efficient transaction pool methods.
- Then a later version of `eth/65` (without a new number) added typed
transactions, described in [EIP-2976](https://eips.ethereum.org/EIPS/eip-2976).
Why it's moved to `nimbus-eth1`:
- Mainly because `eth/64` onwards depend on the current state of block
synchronisation, as well as the blockchain's sequence of hard-fork block
numbers, both of which are part of `nimbus-eth1` run-time state. These
aren't available to pure `nim-eth` code. Although it would be possible to
add an API to let `nimbus-eth1` set these numbers, there isn't any point
because the protocol would still only be useful to `nimbus-eth1`.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
2021-07-21 20:00:03 +00:00
|
|
|
timeout = chronos.seconds(10))
|
|
|
|
|
2022-05-23 16:53:19 +00:00
|
|
|
when trEthTraceHandshakesOk:
|
2021-07-27 01:32:50 +00:00
|
|
|
trace "Handshake: Local and remote networkId",
|
|
|
|
local=network.networkId, remote=m.networkId
|
|
|
|
trace "Handshake: Local and remote genesisHash",
|
2022-10-10 02:31:28 +00:00
|
|
|
local=status.genesisHash, remote=m.genesisHash
|
2021-07-27 01:32:50 +00:00
|
|
|
trace "Handshake: Local and remote forkId",
|
2022-10-10 02:31:28 +00:00
|
|
|
local=(status.forkId.forkHash.toHex & "/" & $status.forkId.forkNext),
|
2021-07-27 01:32:50 +00:00
|
|
|
remote=(m.forkId.forkHash.toHex & "/" & $m.forkId.forkNext)
|
|
|
|
|
Sync: Support for `eth/65` protocol
This patch adds the `eth/65` protocol, documented at
https://github.com/ethereum/devp2p/blob/master/caps/eth.md.
This is an intentionally simple patch, designed to not break, change or depend
on other functionality much, so that the "_old_ sync" methods can be run
usefully again and observed. This patch isn't "new sync" (a different set of
sync algorithms), but it is one of the foundations.
For a while now Nimbus Eth1 only supported protocol `eth/63`. But that's
obsolete, and very few nodes still support it. This meant Nimbus Eth1 would
make slow progress trying to sync, as most up to date clients rejected it.
The current specification is `eth/66`, and the functionality we really need is
in `eth/64`.
So why `eth/65`?
- `eth/64` is essential because of the `forkId` feature. But `eth/64` is on
its way out as well. Many clients, especially the most up to date Geth
running the current hard-forks (Berlin/London) don't talk `eth/64` any more.
- `eth/66` is the current specification, but some clients don't talk `eth/66`
yet. We'd like to have the best peer connectivity during tests, and
currently everything that talks `eth/66` also talks `eth/65`.
- Nimbus Eth1 RLPx only talks one version at a time. (Without changes to the
RLPx module. When those go in we'll add `eth/64..eth/66` for greater peer
reach and testing the `eth/66` behaviour. For simplicity and decoupling,
this patch contains just one version, the most useful.)
What are `eth/64` and `eth/65`?
- `eth/64` (EIP-2364) added `forkId` which allows nodes to distinguish between
Ethereum (ETH) and Ethereum Classic (ETC) blockchains, which share the same
genesis block. `forkId` also protects the system when a new hard fork is
going to be rolled out, by blocking interaction with out of date nodes. The
feature is required nowadays.
We send the right details to allow connection (this has been tested a lot),
but don't apply the full validation rules of EIP-2124/EIP-2364 in this patch.
It's to keep this patch simple (in its effects) and because those rules have
consequences best tested separately. In practice the other node will reject
us when we would reject it, so this is ok for testing, as long as it doesn't
get seriously deployed.
- `eth/65` added more efficient transaction pool methods.
- Then a later version of `eth/65` (without a new number) added typed
transactions, described in [EIP-2976](https://eips.ethereum.org/EIPS/eip-2976).
Why it's moved to `nimbus-eth1`:
- Mainly because `eth/64` onwards depend on the current state of block
synchronisation, as well as the blockchain's sequence of hard-fork block
numbers, both of which are part of `nimbus-eth1` run-time state. These
aren't available to pure `nim-eth` code. Although it would be possible to
add an API to let `nimbus-eth1` set these numbers, there isn't any point
because the protocol would still only be useful to `nimbus-eth1`.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
2021-07-21 20:00:03 +00:00
|
|
|
if m.networkId != network.networkId:
|
|
|
|
trace "Peer for a different network (networkId)", peer,
|
|
|
|
expectNetworkId=network.networkId, gotNetworkId=m.networkId
|
2022-05-23 16:53:19 +00:00
|
|
|
raise newException(
|
|
|
|
UselessPeerError, "Eth handshake for different network")
|
Sync: Support for `eth/65` protocol
This patch adds the `eth/65` protocol, documented at
https://github.com/ethereum/devp2p/blob/master/caps/eth.md.
This is an intentionally simple patch, designed to not break, change or depend
on other functionality much, so that the "_old_ sync" methods can be run
usefully again and observed. This patch isn't "new sync" (a different set of
sync algorithms), but it is one of the foundations.
For a while now Nimbus Eth1 only supported protocol `eth/63`. But that's
obsolete, and very few nodes still support it. This meant Nimbus Eth1 would
make slow progress trying to sync, as most up to date clients rejected it.
The current specification is `eth/66`, and the functionality we really need is
in `eth/64`.
So why `eth/65`?
- `eth/64` is essential because of the `forkId` feature. But `eth/64` is on
its way out as well. Many clients, especially the most up to date Geth
running the current hard-forks (Berlin/London) don't talk `eth/64` any more.
- `eth/66` is the current specification, but some clients don't talk `eth/66`
yet. We'd like to have the best peer connectivity during tests, and
currently everything that talks `eth/66` also talks `eth/65`.
- Nimbus Eth1 RLPx only talks one version at a time. (Without changes to the
RLPx module. When those go in we'll add `eth/64..eth/66` for greater peer
reach and testing the `eth/66` behaviour. For simplicity and decoupling,
this patch contains just one version, the most useful.)
What are `eth/64` and `eth/65`?
- `eth/64` (EIP-2364) added `forkId` which allows nodes to distinguish between
Ethereum (ETH) and Ethereum Classic (ETC) blockchains, which share the same
genesis block. `forkId` also protects the system when a new hard fork is
going to be rolled out, by blocking interaction with out of date nodes. The
feature is required nowadays.
We send the right details to allow connection (this has been tested a lot),
but don't apply the full validation rules of EIP-2124/EIP-2364 in this patch.
It's to keep this patch simple (in its effects) and because those rules have
consequences best tested separately. In practice the other node will reject
us when we would reject it, so this is ok for testing, as long as it doesn't
get seriously deployed.
- `eth/65` added more efficient transaction pool methods.
- Then a later version of `eth/65` (without a new number) added typed
transactions, described in [EIP-2976](https://eips.ethereum.org/EIPS/eip-2976).
Why it's moved to `nimbus-eth1`:
- Mainly because `eth/64` onwards depend on the current state of block
synchronisation, as well as the blockchain's sequence of hard-fork block
numbers, both of which are part of `nimbus-eth1` run-time state. These
aren't available to pure `nim-eth` code. Although it would be possible to
add an API to let `nimbus-eth1` set these numbers, there isn't any point
because the protocol would still only be useful to `nimbus-eth1`.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
2021-07-21 20:00:03 +00:00
|
|
|
|
2022-10-10 02:31:28 +00:00
|
|
|
if m.genesisHash != status.genesisHash:
|
Sync: Support for `eth/65` protocol
This patch adds the `eth/65` protocol, documented at
https://github.com/ethereum/devp2p/blob/master/caps/eth.md.
This is an intentionally simple patch, designed to not break, change or depend
on other functionality much, so that the "_old_ sync" methods can be run
usefully again and observed. This patch isn't "new sync" (a different set of
sync algorithms), but it is one of the foundations.
For a while now Nimbus Eth1 only supported protocol `eth/63`. But that's
obsolete, and very few nodes still support it. This meant Nimbus Eth1 would
make slow progress trying to sync, as most up to date clients rejected it.
The current specification is `eth/66`, and the functionality we really need is
in `eth/64`.
So why `eth/65`?
- `eth/64` is essential because of the `forkId` feature. But `eth/64` is on
its way out as well. Many clients, especially the most up to date Geth
running the current hard-forks (Berlin/London) don't talk `eth/64` any more.
- `eth/66` is the current specification, but some clients don't talk `eth/66`
yet. We'd like to have the best peer connectivity during tests, and
currently everything that talks `eth/66` also talks `eth/65`.
- Nimbus Eth1 RLPx only talks one version at a time. (Without changes to the
RLPx module. When those go in we'll add `eth/64..eth/66` for greater peer
reach and testing the `eth/66` behaviour. For simplicity and decoupling,
this patch contains just one version, the most useful.)
What are `eth/64` and `eth/65`?
- `eth/64` (EIP-2364) added `forkId` which allows nodes to distinguish between
Ethereum (ETH) and Ethereum Classic (ETC) blockchains, which share the same
genesis block. `forkId` also protects the system when a new hard fork is
going to be rolled out, by blocking interaction with out of date nodes. The
feature is required nowadays.
We send the right details to allow connection (this has been tested a lot),
but don't apply the full validation rules of EIP-2124/EIP-2364 in this patch.
It's to keep this patch simple (in its effects) and because those rules have
consequences best tested separately. In practice the other node will reject
us when we would reject it, so this is ok for testing, as long as it doesn't
get seriously deployed.
- `eth/65` added more efficient transaction pool methods.
- Then a later version of `eth/65` (without a new number) added typed
transactions, described in [EIP-2976](https://eips.ethereum.org/EIPS/eip-2976).
Why it's moved to `nimbus-eth1`:
- Mainly because `eth/64` onwards depend on the current state of block
synchronisation, as well as the blockchain's sequence of hard-fork block
numbers, both of which are part of `nimbus-eth1` run-time state. These
aren't available to pure `nim-eth` code. Although it would be possible to
add an API to let `nimbus-eth1` set these numbers, there isn't any point
because the protocol would still only be useful to `nimbus-eth1`.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
2021-07-21 20:00:03 +00:00
|
|
|
trace "Peer for a different network (genesisHash)", peer,
|
2022-11-16 06:45:28 +00:00
|
|
|
expectGenesis=short(status.genesisHash), gotGenesis=short(m.genesisHash)
|
2022-05-23 16:53:19 +00:00
|
|
|
raise newException(
|
|
|
|
UselessPeerError, "Eth handshake for different network")
|
Sync: Support for `eth/65` protocol
This patch adds the `eth/65` protocol, documented at
https://github.com/ethereum/devp2p/blob/master/caps/eth.md.
This is an intentionally simple patch, designed to not break, change or depend
on other functionality much, so that the "_old_ sync" methods can be run
usefully again and observed. This patch isn't "new sync" (a different set of
sync algorithms), but it is one of the foundations.
For a while now Nimbus Eth1 only supported protocol `eth/63`. But that's
obsolete, and very few nodes still support it. This meant Nimbus Eth1 would
make slow progress trying to sync, as most up to date clients rejected it.
The current specification is `eth/66`, and the functionality we really need is
in `eth/64`.
So why `eth/65`?
- `eth/64` is essential because of the `forkId` feature. But `eth/64` is on
its way out as well. Many clients, especially the most up to date Geth
running the current hard-forks (Berlin/London) don't talk `eth/64` any more.
- `eth/66` is the current specification, but some clients don't talk `eth/66`
yet. We'd like to have the best peer connectivity during tests, and
currently everything that talks `eth/66` also talks `eth/65`.
- Nimbus Eth1 RLPx only talks one version at a time. (Without changes to the
RLPx module. When those go in we'll add `eth/64..eth/66` for greater peer
reach and testing the `eth/66` behaviour. For simplicity and decoupling,
this patch contains just one version, the most useful.)
What are `eth/64` and `eth/65`?
- `eth/64` (EIP-2364) added `forkId` which allows nodes to distinguish between
Ethereum (ETH) and Ethereum Classic (ETC) blockchains, which share the same
genesis block. `forkId` also protects the system when a new hard fork is
going to be rolled out, by blocking interaction with out of date nodes. The
feature is required nowadays.
We send the right details to allow connection (this has been tested a lot),
but don't apply the full validation rules of EIP-2124/EIP-2364 in this patch.
It's to keep this patch simple (in its effects) and because those rules have
consequences best tested separately. In practice the other node will reject
us when we would reject it, so this is ok for testing, as long as it doesn't
get seriously deployed.
- `eth/65` added more efficient transaction pool methods.
- Then a later version of `eth/65` (without a new number) added typed
transactions, described in [EIP-2976](https://eips.ethereum.org/EIPS/eip-2976).
Why it's moved to `nimbus-eth1`:
- Mainly because `eth/64` onwards depend on the current state of block
synchronisation, as well as the blockchain's sequence of hard-fork block
numbers, both of which are part of `nimbus-eth1` run-time state. These
aren't available to pure `nim-eth` code. Although it would be possible to
add an API to let `nimbus-eth1` set these numbers, there isn't any point
because the protocol would still only be useful to `nimbus-eth1`.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
2021-07-21 20:00:03 +00:00
|
|
|
|
|
|
|
trace "Peer matches our network", peer
|
|
|
|
peer.state.initialized = true
|
|
|
|
peer.state.bestDifficulty = m.totalDifficulty
|
|
|
|
peer.state.bestBlockHash = m.bestHash
|
|
|
|
|
|
|
|
handshake:
|
|
|
|
# User message 0x00: Status.
|
|
|
|
proc status(peer: Peer,
|
2021-07-26 23:36:49 +00:00
|
|
|
ethVersionArg: uint,
|
Sync: Support for `eth/65` protocol
This patch adds the `eth/65` protocol, documented at
https://github.com/ethereum/devp2p/blob/master/caps/eth.md.
This is an intentionally simple patch, designed to not break, change or depend
on other functionality much, so that the "_old_ sync" methods can be run
usefully again and observed. This patch isn't "new sync" (a different set of
sync algorithms), but it is one of the foundations.
For a while now Nimbus Eth1 only supported protocol `eth/63`. But that's
obsolete, and very few nodes still support it. This meant Nimbus Eth1 would
make slow progress trying to sync, as most up to date clients rejected it.
The current specification is `eth/66`, and the functionality we really need is
in `eth/64`.
So why `eth/65`?
- `eth/64` is essential because of the `forkId` feature. But `eth/64` is on
its way out as well. Many clients, especially the most up to date Geth
running the current hard-forks (Berlin/London) don't talk `eth/64` any more.
- `eth/66` is the current specification, but some clients don't talk `eth/66`
yet. We'd like to have the best peer connectivity during tests, and
currently everything that talks `eth/66` also talks `eth/65`.
- Nimbus Eth1 RLPx only talks one version at a time. (Without changes to the
RLPx module. When those go in we'll add `eth/64..eth/66` for greater peer
reach and testing the `eth/66` behaviour. For simplicity and decoupling,
this patch contains just one version, the most useful.)
What are `eth/64` and `eth/65`?
- `eth/64` (EIP-2364) added `forkId` which allows nodes to distinguish between
Ethereum (ETH) and Ethereum Classic (ETC) blockchains, which share the same
genesis block. `forkId` also protects the system when a new hard fork is
going to be rolled out, by blocking interaction with out of date nodes. The
feature is required nowadays.
We send the right details to allow connection (this has been tested a lot),
but don't apply the full validation rules of EIP-2124/EIP-2364 in this patch.
It's to keep this patch simple (in its effects) and because those rules have
consequences best tested separately. In practice the other node will reject
us when we would reject it, so this is ok for testing, as long as it doesn't
get seriously deployed.
- `eth/65` added more efficient transaction pool methods.
- Then a later version of `eth/65` (without a new number) added typed
transactions, described in [EIP-2976](https://eips.ethereum.org/EIPS/eip-2976).
Why it's moved to `nimbus-eth1`:
- Mainly because `eth/64` onwards depend on the current state of block
synchronisation, as well as the blockchain's sequence of hard-fork block
numbers, both of which are part of `nimbus-eth1` run-time state. These
aren't available to pure `nim-eth` code. Although it would be possible to
add an API to let `nimbus-eth1` set these numbers, there isn't any point
because the protocol would still only be useful to `nimbus-eth1`.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
2021-07-21 20:00:03 +00:00
|
|
|
networkId: NetworkId,
|
|
|
|
totalDifficulty: DifficultyInt,
|
2022-05-17 11:09:49 +00:00
|
|
|
bestHash: Hash256,
|
|
|
|
genesisHash: Hash256,
|
2022-10-10 02:31:28 +00:00
|
|
|
forkId: ChainForkId) =
|
2022-05-23 16:53:19 +00:00
|
|
|
trace trEthRecvReceived & "Status (0x00)", peer,
|
2022-11-16 06:45:28 +00:00
|
|
|
networkId, totalDifficulty, bestHash=short(bestHash), genesisHash=short(genesisHash),
|
2021-07-26 22:28:27 +00:00
|
|
|
forkHash=forkId.forkHash.toHex, forkNext=forkId.forkNext
|
Sync: Support for `eth/65` protocol
This patch adds the `eth/65` protocol, documented at
https://github.com/ethereum/devp2p/blob/master/caps/eth.md.
This is an intentionally simple patch, designed to not break, change or depend
on other functionality much, so that the "_old_ sync" methods can be run
usefully again and observed. This patch isn't "new sync" (a different set of
sync algorithms), but it is one of the foundations.
For a while now Nimbus Eth1 only supported protocol `eth/63`. But that's
obsolete, and very few nodes still support it. This meant Nimbus Eth1 would
make slow progress trying to sync, as most up to date clients rejected it.
The current specification is `eth/66`, and the functionality we really need is
in `eth/64`.
So why `eth/65`?
- `eth/64` is essential because of the `forkId` feature. But `eth/64` is on
its way out as well. Many clients, especially the most up to date Geth
running the current hard-forks (Berlin/London) don't talk `eth/64` any more.
- `eth/66` is the current specification, but some clients don't talk `eth/66`
yet. We'd like to have the best peer connectivity during tests, and
currently everything that talks `eth/66` also talks `eth/65`.
- Nimbus Eth1 RLPx only talks one version at a time. (Without changes to the
RLPx module. When those go in we'll add `eth/64..eth/66` for greater peer
reach and testing the `eth/66` behaviour. For simplicity and decoupling,
this patch contains just one version, the most useful.)
What are `eth/64` and `eth/65`?
- `eth/64` (EIP-2364) added `forkId` which allows nodes to distinguish between
Ethereum (ETH) and Ethereum Classic (ETC) blockchains, which share the same
genesis block. `forkId` also protects the system when a new hard fork is
going to be rolled out, by blocking interaction with out of date nodes. The
feature is required nowadays.
We send the right details to allow connection (this has been tested a lot),
but don't apply the full validation rules of EIP-2124/EIP-2364 in this patch.
It's to keep this patch simple (in its effects) and because those rules have
consequences best tested separately. In practice the other node will reject
us when we would reject it, so this is ok for testing, as long as it doesn't
get seriously deployed.
- `eth/65` added more efficient transaction pool methods.
- Then a later version of `eth/65` (without a new number) added typed
transactions, described in [EIP-2976](https://eips.ethereum.org/EIPS/eip-2976).
Why it's moved to `nimbus-eth1`:
- Mainly because `eth/64` onwards depend on the current state of block
synchronisation, as well as the blockchain's sequence of hard-fork block
numbers, both of which are part of `nimbus-eth1` run-time state. These
aren't available to pure `nim-eth` code. Although it would be possible to
add an API to let `nimbus-eth1` set these numbers, there isn't any point
because the protocol would still only be useful to `nimbus-eth1`.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
2021-07-21 20:00:03 +00:00
|
|
|
|
|
|
|
# User message 0x01: NewBlockHashes.
|
|
|
|
proc newBlockHashes(peer: Peer, hashes: openArray[NewBlockHashesAnnounce]) =
|
2022-05-23 16:53:19 +00:00
|
|
|
when trEthTraceGossipOk:
|
2022-10-10 02:31:28 +00:00
|
|
|
trace trEthRecvReceived & "NewBlockHashes (0x01)", peer,
|
2022-05-23 16:53:19 +00:00
|
|
|
hashes=hashes.len
|
2022-10-10 02:31:28 +00:00
|
|
|
|
|
|
|
let ctx = peer.networkState()
|
2024-02-19 11:46:48 +00:00
|
|
|
let res = ctx.handleNewBlockHashes(peer, hashes)
|
|
|
|
handleHandlerError(res)
|
Sync: Support for `eth/65` protocol
This patch adds the `eth/65` protocol, documented at
https://github.com/ethereum/devp2p/blob/master/caps/eth.md.
This is an intentionally simple patch, designed to not break, change or depend
on other functionality much, so that the "_old_ sync" methods can be run
usefully again and observed. This patch isn't "new sync" (a different set of
sync algorithms), but it is one of the foundations.
For a while now Nimbus Eth1 only supported protocol `eth/63`. But that's
obsolete, and very few nodes still support it. This meant Nimbus Eth1 would
make slow progress trying to sync, as most up to date clients rejected it.
The current specification is `eth/66`, and the functionality we really need is
in `eth/64`.
So why `eth/65`?
- `eth/64` is essential because of the `forkId` feature. But `eth/64` is on
its way out as well. Many clients, especially the most up to date Geth
running the current hard-forks (Berlin/London) don't talk `eth/64` any more.
- `eth/66` is the current specification, but some clients don't talk `eth/66`
yet. We'd like to have the best peer connectivity during tests, and
currently everything that talks `eth/66` also talks `eth/65`.
- Nimbus Eth1 RLPx only talks one version at a time. (Without changes to the
RLPx module. When those go in we'll add `eth/64..eth/66` for greater peer
reach and testing the `eth/66` behaviour. For simplicity and decoupling,
this patch contains just one version, the most useful.)
What are `eth/64` and `eth/65`?
- `eth/64` (EIP-2364) added `forkId` which allows nodes to distinguish between
Ethereum (ETH) and Ethereum Classic (ETC) blockchains, which share the same
genesis block. `forkId` also protects the system when a new hard fork is
going to be rolled out, by blocking interaction with out of date nodes. The
feature is required nowadays.
We send the right details to allow connection (this has been tested a lot),
but don't apply the full validation rules of EIP-2124/EIP-2364 in this patch.
It's to keep this patch simple (in its effects) and because those rules have
consequences best tested separately. In practice the other node will reject
us when we would reject it, so this is ok for testing, as long as it doesn't
get seriously deployed.
- `eth/65` added more efficient transaction pool methods.
- Then a later version of `eth/65` (without a new number) added typed
transactions, described in [EIP-2976](https://eips.ethereum.org/EIPS/eip-2976).
Why it's moved to `nimbus-eth1`:
- Mainly because `eth/64` onwards depend on the current state of block
synchronisation, as well as the blockchain's sequence of hard-fork block
numbers, both of which are part of `nimbus-eth1` run-time state. These
aren't available to pure `nim-eth` code. Although it would be possible to
add an API to let `nimbus-eth1` set these numbers, there isn't any point
because the protocol would still only be useful to `nimbus-eth1`.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
2021-07-21 20:00:03 +00:00
|
|
|
|
|
|
|
# User message 0x02: Transactions.
|
|
|
|
proc transactions(peer: Peer, transactions: openArray[Transaction]) =
|
2022-05-23 16:53:19 +00:00
|
|
|
when trEthTraceGossipOk:
|
2022-10-10 02:31:28 +00:00
|
|
|
trace trEthRecvReceived & "Transactions (0x02)", peer,
|
2022-05-23 16:53:19 +00:00
|
|
|
transactions=transactions.len
|
2022-10-10 02:31:28 +00:00
|
|
|
|
|
|
|
let ctx = peer.networkState()
|
2024-02-19 11:46:48 +00:00
|
|
|
let res = ctx.handleAnnouncedTxs(peer, transactions)
|
|
|
|
handleHandlerError(res)
|
Sync: Support for `eth/65` protocol
This patch adds the `eth/65` protocol, documented at
https://github.com/ethereum/devp2p/blob/master/caps/eth.md.
This is an intentionally simple patch, designed to not break, change or depend
on other functionality much, so that the "_old_ sync" methods can be run
usefully again and observed. This patch isn't "new sync" (a different set of
sync algorithms), but it is one of the foundations.
For a while now Nimbus Eth1 only supported protocol `eth/63`. But that's
obsolete, and very few nodes still support it. This meant Nimbus Eth1 would
make slow progress trying to sync, as most up to date clients rejected it.
The current specification is `eth/66`, and the functionality we really need is
in `eth/64`.
So why `eth/65`?
- `eth/64` is essential because of the `forkId` feature. But `eth/64` is on
its way out as well. Many clients, especially the most up to date Geth
running the current hard-forks (Berlin/London) don't talk `eth/64` any more.
- `eth/66` is the current specification, but some clients don't talk `eth/66`
yet. We'd like to have the best peer connectivity during tests, and
currently everything that talks `eth/66` also talks `eth/65`.
- Nimbus Eth1 RLPx only talks one version at a time. (Without changes to the
RLPx module. When those go in we'll add `eth/64..eth/66` for greater peer
reach and testing the `eth/66` behaviour. For simplicity and decoupling,
this patch contains just one version, the most useful.)
What are `eth/64` and `eth/65`?
- `eth/64` (EIP-2364) added `forkId` which allows nodes to distinguish between
Ethereum (ETH) and Ethereum Classic (ETC) blockchains, which share the same
genesis block. `forkId` also protects the system when a new hard fork is
going to be rolled out, by blocking interaction with out of date nodes. The
feature is required nowadays.
We send the right details to allow connection (this has been tested a lot),
but don't apply the full validation rules of EIP-2124/EIP-2364 in this patch.
It's to keep this patch simple (in its effects) and because those rules have
consequences best tested separately. In practice the other node will reject
us when we would reject it, so this is ok for testing, as long as it doesn't
get seriously deployed.
- `eth/65` added more efficient transaction pool methods.
- Then a later version of `eth/65` (without a new number) added typed
transactions, described in [EIP-2976](https://eips.ethereum.org/EIPS/eip-2976).
Why it's moved to `nimbus-eth1`:
- Mainly because `eth/64` onwards depend on the current state of block
synchronisation, as well as the blockchain's sequence of hard-fork block
numbers, both of which are part of `nimbus-eth1` run-time state. These
aren't available to pure `nim-eth` code. Although it would be possible to
add an API to let `nimbus-eth1` set these numbers, there isn't any point
because the protocol would still only be useful to `nimbus-eth1`.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
2021-07-21 20:00:03 +00:00
|
|
|
|
|
|
|
requestResponse:
|
|
|
|
# User message 0x03: GetBlockHeaders.
|
|
|
|
proc getBlockHeaders(peer: Peer, request: BlocksRequest) =
|
2022-05-23 16:53:19 +00:00
|
|
|
when trEthTracePacketsOk:
|
|
|
|
trace trEthRecvReceived & "GetBlockHeaders (0x03)", peer,
|
2022-10-10 02:31:28 +00:00
|
|
|
count=request.maxResults
|
2022-05-09 14:04:48 +00:00
|
|
|
|
Sync: Support for `eth/65` protocol
This patch adds the `eth/65` protocol, documented at
https://github.com/ethereum/devp2p/blob/master/caps/eth.md.
This is an intentionally simple patch, designed to not break, change or depend
on other functionality much, so that the "_old_ sync" methods can be run
usefully again and observed. This patch isn't "new sync" (a different set of
sync algorithms), but it is one of the foundations.
For a while now Nimbus Eth1 only supported protocol `eth/63`. But that's
obsolete, and very few nodes still support it. This meant Nimbus Eth1 would
make slow progress trying to sync, as most up to date clients rejected it.
The current specification is `eth/66`, and the functionality we really need is
in `eth/64`.
So why `eth/65`?
- `eth/64` is essential because of the `forkId` feature. But `eth/64` is on
its way out as well. Many clients, especially the most up to date Geth
running the current hard-forks (Berlin/London) don't talk `eth/64` any more.
- `eth/66` is the current specification, but some clients don't talk `eth/66`
yet. We'd like to have the best peer connectivity during tests, and
currently everything that talks `eth/66` also talks `eth/65`.
- Nimbus Eth1 RLPx only talks one version at a time. (Without changes to the
RLPx module. When those go in we'll add `eth/64..eth/66` for greater peer
reach and testing the `eth/66` behaviour. For simplicity and decoupling,
this patch contains just one version, the most useful.)
What are `eth/64` and `eth/65`?
- `eth/64` (EIP-2364) added `forkId` which allows nodes to distinguish between
Ethereum (ETH) and Ethereum Classic (ETC) blockchains, which share the same
genesis block. `forkId` also protects the system when a new hard fork is
going to be rolled out, by blocking interaction with out of date nodes. The
feature is required nowadays.
We send the right details to allow connection (this has been tested a lot),
but don't apply the full validation rules of EIP-2124/EIP-2364 in this patch.
It's to keep this patch simple (in its effects) and because those rules have
consequences best tested separately. In practice the other node will reject
us when we would reject it, so this is ok for testing, as long as it doesn't
get seriously deployed.
- `eth/65` added more efficient transaction pool methods.
- Then a later version of `eth/65` (without a new number) added typed
transactions, described in [EIP-2976](https://eips.ethereum.org/EIPS/eip-2976).
Why it's moved to `nimbus-eth1`:
- Mainly because `eth/64` onwards depend on the current state of block
synchronisation, as well as the blockchain's sequence of hard-fork block
numbers, both of which are part of `nimbus-eth1` run-time state. These
aren't available to pure `nim-eth` code. Although it would be possible to
add an API to let `nimbus-eth1` set these numbers, there isn't any point
because the protocol would still only be useful to `nimbus-eth1`.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
2021-07-21 20:00:03 +00:00
|
|
|
if request.maxResults > uint64(maxHeadersFetch):
|
2022-05-13 16:30:10 +00:00
|
|
|
debug "GetBlockHeaders (0x03) requested too many headers",
|
2021-07-26 22:28:27 +00:00
|
|
|
peer, requested=request.maxResults, max=maxHeadersFetch
|
Sync: Support for `eth/65` protocol
This patch adds the `eth/65` protocol, documented at
https://github.com/ethereum/devp2p/blob/master/caps/eth.md.
This is an intentionally simple patch, designed to not break, change or depend
on other functionality much, so that the "_old_ sync" methods can be run
usefully again and observed. This patch isn't "new sync" (a different set of
sync algorithms), but it is one of the foundations.
For a while now Nimbus Eth1 only supported protocol `eth/63`. But that's
obsolete, and very few nodes still support it. This meant Nimbus Eth1 would
make slow progress trying to sync, as most up to date clients rejected it.
The current specification is `eth/66`, and the functionality we really need is
in `eth/64`.
So why `eth/65`?
- `eth/64` is essential because of the `forkId` feature. But `eth/64` is on
its way out as well. Many clients, especially the most up to date Geth
running the current hard-forks (Berlin/London) don't talk `eth/64` any more.
- `eth/66` is the current specification, but some clients don't talk `eth/66`
yet. We'd like to have the best peer connectivity during tests, and
currently everything that talks `eth/66` also talks `eth/65`.
- Nimbus Eth1 RLPx only talks one version at a time. (Without changes to the
RLPx module. When those go in we'll add `eth/64..eth/66` for greater peer
reach and testing the `eth/66` behaviour. For simplicity and decoupling,
this patch contains just one version, the most useful.)
What are `eth/64` and `eth/65`?
- `eth/64` (EIP-2364) added `forkId` which allows nodes to distinguish between
Ethereum (ETH) and Ethereum Classic (ETC) blockchains, which share the same
genesis block. `forkId` also protects the system when a new hard fork is
going to be rolled out, by blocking interaction with out of date nodes. The
feature is required nowadays.
We send the right details to allow connection (this has been tested a lot),
but don't apply the full validation rules of EIP-2124/EIP-2364 in this patch.
It's to keep this patch simple (in its effects) and because those rules have
consequences best tested separately. In practice the other node will reject
us when we would reject it, so this is ok for testing, as long as it doesn't
get seriously deployed.
- `eth/65` added more efficient transaction pool methods.
- Then a later version of `eth/65` (without a new number) added typed
transactions, described in [EIP-2976](https://eips.ethereum.org/EIPS/eip-2976).
Why it's moved to `nimbus-eth1`:
- Mainly because `eth/64` onwards depend on the current state of block
synchronisation, as well as the blockchain's sequence of hard-fork block
numbers, both of which are part of `nimbus-eth1` run-time state. These
aren't available to pure `nim-eth` code. Although it would be possible to
add an API to let `nimbus-eth1` set these numbers, there isn't any point
because the protocol would still only be useful to `nimbus-eth1`.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
2021-07-21 20:00:03 +00:00
|
|
|
await peer.disconnect(BreachOfProtocol)
|
|
|
|
return
|
|
|
|
|
2022-10-10 02:31:28 +00:00
|
|
|
let ctx = peer.networkState()
|
|
|
|
let headers = ctx.getBlockHeaders(request)
|
2024-02-19 11:46:48 +00:00
|
|
|
handleHandlerError(headers)
|
|
|
|
if headers.get.len > 0:
|
2022-05-23 16:53:19 +00:00
|
|
|
trace trEthSendReplying & "with BlockHeaders (0x04)", peer,
|
2024-02-19 11:46:48 +00:00
|
|
|
sent=headers.get.len, requested=request.maxResults
|
2021-07-26 22:28:27 +00:00
|
|
|
else:
|
2022-05-23 16:53:19 +00:00
|
|
|
trace trEthSendReplying & "EMPTY BlockHeaders (0x04)", peer,
|
|
|
|
sent=0, requested=request.maxResults
|
2021-07-26 22:28:27 +00:00
|
|
|
|
2024-02-19 11:46:48 +00:00
|
|
|
await response.send(headers.get)
|
Sync: Support for `eth/65` protocol
This patch adds the `eth/65` protocol, documented at
https://github.com/ethereum/devp2p/blob/master/caps/eth.md.
This is an intentionally simple patch, designed to not break, change or depend
on other functionality much, so that the "_old_ sync" methods can be run
usefully again and observed. This patch isn't "new sync" (a different set of
sync algorithms), but it is one of the foundations.
For a while now Nimbus Eth1 only supported protocol `eth/63`. But that's
obsolete, and very few nodes still support it. This meant Nimbus Eth1 would
make slow progress trying to sync, as most up to date clients rejected it.
The current specification is `eth/66`, and the functionality we really need is
in `eth/64`.
So why `eth/65`?
- `eth/64` is essential because of the `forkId` feature. But `eth/64` is on
its way out as well. Many clients, especially the most up to date Geth
running the current hard-forks (Berlin/London) don't talk `eth/64` any more.
- `eth/66` is the current specification, but some clients don't talk `eth/66`
yet. We'd like to have the best peer connectivity during tests, and
currently everything that talks `eth/66` also talks `eth/65`.
- Nimbus Eth1 RLPx only talks one version at a time. (Without changes to the
RLPx module. When those go in we'll add `eth/64..eth/66` for greater peer
reach and testing the `eth/66` behaviour. For simplicity and decoupling,
this patch contains just one version, the most useful.)
What are `eth/64` and `eth/65`?
- `eth/64` (EIP-2364) added `forkId` which allows nodes to distinguish between
Ethereum (ETH) and Ethereum Classic (ETC) blockchains, which share the same
genesis block. `forkId` also protects the system when a new hard fork is
going to be rolled out, by blocking interaction with out of date nodes. The
feature is required nowadays.
We send the right details to allow connection (this has been tested a lot),
but don't apply the full validation rules of EIP-2124/EIP-2364 in this patch.
It's to keep this patch simple (in its effects) and because those rules have
consequences best tested separately. In practice the other node will reject
us when we would reject it, so this is ok for testing, as long as it doesn't
get seriously deployed.
- `eth/65` added more efficient transaction pool methods.
- Then a later version of `eth/65` (without a new number) added typed
transactions, described in [EIP-2976](https://eips.ethereum.org/EIPS/eip-2976).
Why it's moved to `nimbus-eth1`:
- Mainly because `eth/64` onwards depend on the current state of block
synchronisation, as well as the blockchain's sequence of hard-fork block
numbers, both of which are part of `nimbus-eth1` run-time state. These
aren't available to pure `nim-eth` code. Although it would be possible to
add an API to let `nimbus-eth1` set these numbers, there isn't any point
because the protocol would still only be useful to `nimbus-eth1`.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
2021-07-21 20:00:03 +00:00
|
|
|
|
|
|
|
# User message 0x04: BlockHeaders.
|
|
|
|
proc blockHeaders(p: Peer, headers: openArray[BlockHeader])
|
|
|
|
|
|
|
|
requestResponse:
|
|
|
|
# User message 0x05: GetBlockBodies.
|
2022-05-17 11:09:49 +00:00
|
|
|
proc getBlockBodies(peer: Peer, hashes: openArray[Hash256]) =
|
2022-05-23 16:53:19 +00:00
|
|
|
trace trEthRecvReceived & "GetBlockBodies (0x05)", peer,
|
|
|
|
hashes=hashes.len
|
Sync: Support for `eth/65` protocol
This patch adds the `eth/65` protocol, documented at
https://github.com/ethereum/devp2p/blob/master/caps/eth.md.
This is an intentionally simple patch, designed to not break, change or depend
on other functionality much, so that the "_old_ sync" methods can be run
usefully again and observed. This patch isn't "new sync" (a different set of
sync algorithms), but it is one of the foundations.
For a while now Nimbus Eth1 only supported protocol `eth/63`. But that's
obsolete, and very few nodes still support it. This meant Nimbus Eth1 would
make slow progress trying to sync, as most up to date clients rejected it.
The current specification is `eth/66`, and the functionality we really need is
in `eth/64`.
So why `eth/65`?
- `eth/64` is essential because of the `forkId` feature. But `eth/64` is on
its way out as well. Many clients, especially the most up to date Geth
running the current hard-forks (Berlin/London) don't talk `eth/64` any more.
- `eth/66` is the current specification, but some clients don't talk `eth/66`
yet. We'd like to have the best peer connectivity during tests, and
currently everything that talks `eth/66` also talks `eth/65`.
- Nimbus Eth1 RLPx only talks one version at a time. (Without changes to the
RLPx module. When those go in we'll add `eth/64..eth/66` for greater peer
reach and testing the `eth/66` behaviour. For simplicity and decoupling,
this patch contains just one version, the most useful.)
What are `eth/64` and `eth/65`?
- `eth/64` (EIP-2364) added `forkId` which allows nodes to distinguish between
Ethereum (ETH) and Ethereum Classic (ETC) blockchains, which share the same
genesis block. `forkId` also protects the system when a new hard fork is
going to be rolled out, by blocking interaction with out of date nodes. The
feature is required nowadays.
We send the right details to allow connection (this has been tested a lot),
but don't apply the full validation rules of EIP-2124/EIP-2364 in this patch.
It's to keep this patch simple (in its effects) and because those rules have
consequences best tested separately. In practice the other node will reject
us when we would reject it, so this is ok for testing, as long as it doesn't
get seriously deployed.
- `eth/65` added more efficient transaction pool methods.
- Then a later version of `eth/65` (without a new number) added typed
transactions, described in [EIP-2976](https://eips.ethereum.org/EIPS/eip-2976).
Why it's moved to `nimbus-eth1`:
- Mainly because `eth/64` onwards depend on the current state of block
synchronisation, as well as the blockchain's sequence of hard-fork block
numbers, both of which are part of `nimbus-eth1` run-time state. These
aren't available to pure `nim-eth` code. Although it would be possible to
add an API to let `nimbus-eth1` set these numbers, there isn't any point
because the protocol would still only be useful to `nimbus-eth1`.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
2021-07-21 20:00:03 +00:00
|
|
|
if hashes.len > maxBodiesFetch:
|
2022-05-13 16:30:10 +00:00
|
|
|
debug "GetBlockBodies (0x05) requested too many bodies",
|
2021-07-26 22:28:27 +00:00
|
|
|
peer, requested=hashes.len, max=maxBodiesFetch
|
Sync: Support for `eth/65` protocol
This patch adds the `eth/65` protocol, documented at
https://github.com/ethereum/devp2p/blob/master/caps/eth.md.
This is an intentionally simple patch, designed to not break, change or depend
on other functionality much, so that the "_old_ sync" methods can be run
usefully again and observed. This patch isn't "new sync" (a different set of
sync algorithms), but it is one of the foundations.
For a while now Nimbus Eth1 only supported protocol `eth/63`. But that's
obsolete, and very few nodes still support it. This meant Nimbus Eth1 would
make slow progress trying to sync, as most up to date clients rejected it.
The current specification is `eth/66`, and the functionality we really need is
in `eth/64`.
So why `eth/65`?
- `eth/64` is essential because of the `forkId` feature. But `eth/64` is on
its way out as well. Many clients, especially the most up to date Geth
running the current hard-forks (Berlin/London) don't talk `eth/64` any more.
- `eth/66` is the current specification, but some clients don't talk `eth/66`
yet. We'd like to have the best peer connectivity during tests, and
currently everything that talks `eth/66` also talks `eth/65`.
- Nimbus Eth1 RLPx only talks one version at a time. (Without changes to the
RLPx module. When those go in we'll add `eth/64..eth/66` for greater peer
reach and testing the `eth/66` behaviour. For simplicity and decoupling,
this patch contains just one version, the most useful.)
What are `eth/64` and `eth/65`?
- `eth/64` (EIP-2364) added `forkId` which allows nodes to distinguish between
Ethereum (ETH) and Ethereum Classic (ETC) blockchains, which share the same
genesis block. `forkId` also protects the system when a new hard fork is
going to be rolled out, by blocking interaction with out of date nodes. The
feature is required nowadays.
We send the right details to allow connection (this has been tested a lot),
but don't apply the full validation rules of EIP-2124/EIP-2364 in this patch.
It's to keep this patch simple (in its effects) and because those rules have
consequences best tested separately. In practice the other node will reject
us when we would reject it, so this is ok for testing, as long as it doesn't
get seriously deployed.
- `eth/65` added more efficient transaction pool methods.
- Then a later version of `eth/65` (without a new number) added typed
transactions, described in [EIP-2976](https://eips.ethereum.org/EIPS/eip-2976).
Why it's moved to `nimbus-eth1`:
- Mainly because `eth/64` onwards depend on the current state of block
synchronisation, as well as the blockchain's sequence of hard-fork block
numbers, both of which are part of `nimbus-eth1` run-time state. These
aren't available to pure `nim-eth` code. Although it would be possible to
add an API to let `nimbus-eth1` set these numbers, there isn't any point
because the protocol would still only be useful to `nimbus-eth1`.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
2021-07-21 20:00:03 +00:00
|
|
|
await peer.disconnect(BreachOfProtocol)
|
|
|
|
return
|
|
|
|
|
2022-10-10 02:31:28 +00:00
|
|
|
let ctx = peer.networkState()
|
|
|
|
let bodies = ctx.getBlockBodies(hashes)
|
2024-02-19 11:46:48 +00:00
|
|
|
handleHandlerError(bodies)
|
|
|
|
if bodies.get.len > 0:
|
2022-05-23 16:53:19 +00:00
|
|
|
trace trEthSendReplying & "with BlockBodies (0x06)", peer,
|
2024-02-19 11:46:48 +00:00
|
|
|
sent=bodies.get.len, requested=hashes.len
|
2021-07-26 22:28:27 +00:00
|
|
|
else:
|
2022-05-23 16:53:19 +00:00
|
|
|
trace trEthSendReplying & "EMPTY BlockBodies (0x06)", peer,
|
|
|
|
sent=0, requested=hashes.len
|
2021-07-26 22:28:27 +00:00
|
|
|
|
2024-02-19 11:46:48 +00:00
|
|
|
await response.send(bodies.get)
|
Sync: Support for `eth/65` protocol
This patch adds the `eth/65` protocol, documented at
https://github.com/ethereum/devp2p/blob/master/caps/eth.md.
This is an intentionally simple patch, designed to not break, change or depend
on other functionality much, so that the "_old_ sync" methods can be run
usefully again and observed. This patch isn't "new sync" (a different set of
sync algorithms), but it is one of the foundations.
For a while now Nimbus Eth1 only supported protocol `eth/63`. But that's
obsolete, and very few nodes still support it. This meant Nimbus Eth1 would
make slow progress trying to sync, as most up to date clients rejected it.
The current specification is `eth/66`, and the functionality we really need is
in `eth/64`.
So why `eth/65`?
- `eth/64` is essential because of the `forkId` feature. But `eth/64` is on
its way out as well. Many clients, especially the most up to date Geth
running the current hard-forks (Berlin/London) don't talk `eth/64` any more.
- `eth/66` is the current specification, but some clients don't talk `eth/66`
yet. We'd like to have the best peer connectivity during tests, and
currently everything that talks `eth/66` also talks `eth/65`.
- Nimbus Eth1 RLPx only talks one version at a time. (Without changes to the
RLPx module. When those go in we'll add `eth/64..eth/66` for greater peer
reach and testing the `eth/66` behaviour. For simplicity and decoupling,
this patch contains just one version, the most useful.)
What are `eth/64` and `eth/65`?
- `eth/64` (EIP-2364) added `forkId` which allows nodes to distinguish between
Ethereum (ETH) and Ethereum Classic (ETC) blockchains, which share the same
genesis block. `forkId` also protects the system when a new hard fork is
going to be rolled out, by blocking interaction with out of date nodes. The
feature is required nowadays.
We send the right details to allow connection (this has been tested a lot),
but don't apply the full validation rules of EIP-2124/EIP-2364 in this patch.
It's to keep this patch simple (in its effects) and because those rules have
consequences best tested separately. In practice the other node will reject
us when we would reject it, so this is ok for testing, as long as it doesn't
get seriously deployed.
- `eth/65` added more efficient transaction pool methods.
- Then a later version of `eth/65` (without a new number) added typed
transactions, described in [EIP-2976](https://eips.ethereum.org/EIPS/eip-2976).
Why it's moved to `nimbus-eth1`:
- Mainly because `eth/64` onwards depend on the current state of block
synchronisation, as well as the blockchain's sequence of hard-fork block
numbers, both of which are part of `nimbus-eth1` run-time state. These
aren't available to pure `nim-eth` code. Although it would be possible to
add an API to let `nimbus-eth1` set these numbers, there isn't any point
because the protocol would still only be useful to `nimbus-eth1`.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
2021-07-21 20:00:03 +00:00
|
|
|
|
|
|
|
# User message 0x06: BlockBodies.
|
|
|
|
proc blockBodies(peer: Peer, blocks: openArray[BlockBody])
|
|
|
|
|
|
|
|
# User message 0x07: NewBlock.
|
2022-10-10 02:31:28 +00:00
|
|
|
proc newBlock(peer: Peer, blk: EthBlock, totalDifficulty: DifficultyInt) =
|
Sync: Fix `NewBlockAnnounce` RLP decoding errors
Turns out `{.rlpInline.}` doesn't do anything.
It's documented but not implemented.
Due to this, whenever a peer sent us a `NewBlock` message, we had an RLP
decoding error processing it, and disconnected the peer thinking it was the
peer's error.
These messages are sent often by good peers, so whenever we connected to a
really good peer, we'd end up disconnecting from it due to this.
Because a block body is a list of transactions, the parse errors looked
suspiciously like EIP-2718/2976/2930/1559 typed transaction RLP errors.
But it was a failure to parse `BlockBody` inline.
Conveniently, the `EthBlock` type defined for another reason is encoded exactly
the way `NewBlockAnnounce` needs to be, so we can reuse that type.
This didn't stand out before updating to `eth/65`, because with old protocols
we tend to only connect to old peers, which may be out of date themselves and
have no new blocks to send. Also, we didn't really investigate occasional
disconnects before, we assumed they're just part of P2P life.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
2021-07-27 00:17:52 +00:00
|
|
|
# (Note, needs to use `EthBlock` instead of its alias `NewBlockAnnounce`
|
|
|
|
# because either `p2pProtocol` or RLPx doesn't work with an alias.)
|
2022-05-23 16:53:19 +00:00
|
|
|
when trEthTraceGossipOk:
|
2022-10-10 02:31:28 +00:00
|
|
|
trace trEthRecvReceived & "NewBlock (0x07)", peer,
|
2022-05-23 16:53:19 +00:00
|
|
|
totalDifficulty,
|
2022-10-10 02:31:28 +00:00
|
|
|
blockNumber = blk.header.blockNumber,
|
|
|
|
blockDifficulty = blk.header.difficulty
|
|
|
|
|
|
|
|
let ctx = peer.networkState()
|
2024-02-19 11:46:48 +00:00
|
|
|
let res = ctx.handleNewBlock(peer, blk, totalDifficulty)
|
|
|
|
handleHandlerError(res)
|
Sync: Support for `eth/65` protocol
This patch adds the `eth/65` protocol, documented at
https://github.com/ethereum/devp2p/blob/master/caps/eth.md.
This is an intentionally simple patch, designed to not break, change or depend
on other functionality much, so that the "_old_ sync" methods can be run
usefully again and observed. This patch isn't "new sync" (a different set of
sync algorithms), but it is one of the foundations.
For a while now Nimbus Eth1 only supported protocol `eth/63`. But that's
obsolete, and very few nodes still support it. This meant Nimbus Eth1 would
make slow progress trying to sync, as most up to date clients rejected it.
The current specification is `eth/66`, and the functionality we really need is
in `eth/64`.
So why `eth/65`?
- `eth/64` is essential because of the `forkId` feature. But `eth/64` is on
its way out as well. Many clients, especially the most up to date Geth
running the current hard-forks (Berlin/London) don't talk `eth/64` any more.
- `eth/66` is the current specification, but some clients don't talk `eth/66`
yet. We'd like to have the best peer connectivity during tests, and
currently everything that talks `eth/66` also talks `eth/65`.
- Nimbus Eth1 RLPx only talks one version at a time. (Without changes to the
RLPx module. When those go in we'll add `eth/64..eth/66` for greater peer
reach and testing the `eth/66` behaviour. For simplicity and decoupling,
this patch contains just one version, the most useful.)
What are `eth/64` and `eth/65`?
- `eth/64` (EIP-2364) added `forkId` which allows nodes to distinguish between
Ethereum (ETH) and Ethereum Classic (ETC) blockchains, which share the same
genesis block. `forkId` also protects the system when a new hard fork is
going to be rolled out, by blocking interaction with out of date nodes. The
feature is required nowadays.
We send the right details to allow connection (this has been tested a lot),
but don't apply the full validation rules of EIP-2124/EIP-2364 in this patch.
It's to keep this patch simple (in its effects) and because those rules have
consequences best tested separately. In practice the other node will reject
us when we would reject it, so this is ok for testing, as long as it doesn't
get seriously deployed.
- `eth/65` added more efficient transaction pool methods.
- Then a later version of `eth/65` (without a new number) added typed
transactions, described in [EIP-2976](https://eips.ethereum.org/EIPS/eip-2976).
Why it's moved to `nimbus-eth1`:
- Mainly because `eth/64` onwards depend on the current state of block
synchronisation, as well as the blockchain's sequence of hard-fork block
numbers, both of which are part of `nimbus-eth1` run-time state. These
aren't available to pure `nim-eth` code. Although it would be possible to
add an API to let `nimbus-eth1` set these numbers, there isn't any point
because the protocol would still only be useful to `nimbus-eth1`.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
2021-07-21 20:00:03 +00:00
|
|
|
|
|
|
|
# User message 0x08: NewPooledTransactionHashes.
|
2022-05-17 11:09:49 +00:00
|
|
|
proc newPooledTransactionHashes(peer: Peer, txHashes: openArray[Hash256]) =
|
2022-05-23 16:53:19 +00:00
|
|
|
when trEthTraceGossipOk:
|
2022-10-10 02:31:28 +00:00
|
|
|
trace trEthRecvReceived & "NewPooledTransactionHashes (0x08)", peer,
|
2022-05-23 16:53:19 +00:00
|
|
|
hashes=txHashes.len
|
2022-10-10 02:31:28 +00:00
|
|
|
|
|
|
|
let ctx = peer.networkState()
|
2024-02-19 11:46:48 +00:00
|
|
|
let res = ctx.handleAnnouncedTxsHashes(peer, txHashes)
|
|
|
|
handleHandlerError(res)
|
Sync: Support for `eth/65` protocol
This patch adds the `eth/65` protocol, documented at
https://github.com/ethereum/devp2p/blob/master/caps/eth.md.
This is an intentionally simple patch, designed to not break, change or depend
on other functionality much, so that the "_old_ sync" methods can be run
usefully again and observed. This patch isn't "new sync" (a different set of
sync algorithms), but it is one of the foundations.
For a while now Nimbus Eth1 only supported protocol `eth/63`. But that's
obsolete, and very few nodes still support it. This meant Nimbus Eth1 would
make slow progress trying to sync, as most up to date clients rejected it.
The current specification is `eth/66`, and the functionality we really need is
in `eth/64`.
So why `eth/65`?
- `eth/64` is essential because of the `forkId` feature. But `eth/64` is on
its way out as well. Many clients, especially the most up to date Geth
running the current hard-forks (Berlin/London) don't talk `eth/64` any more.
- `eth/66` is the current specification, but some clients don't talk `eth/66`
yet. We'd like to have the best peer connectivity during tests, and
currently everything that talks `eth/66` also talks `eth/65`.
- Nimbus Eth1 RLPx only talks one version at a time. (Without changes to the
RLPx module. When those go in we'll add `eth/64..eth/66` for greater peer
reach and testing the `eth/66` behaviour. For simplicity and decoupling,
this patch contains just one version, the most useful.)
What are `eth/64` and `eth/65`?
- `eth/64` (EIP-2364) added `forkId` which allows nodes to distinguish between
Ethereum (ETH) and Ethereum Classic (ETC) blockchains, which share the same
genesis block. `forkId` also protects the system when a new hard fork is
going to be rolled out, by blocking interaction with out of date nodes. The
feature is required nowadays.
We send the right details to allow connection (this has been tested a lot),
but don't apply the full validation rules of EIP-2124/EIP-2364 in this patch.
It's to keep this patch simple (in its effects) and because those rules have
consequences best tested separately. In practice the other node will reject
us when we would reject it, so this is ok for testing, as long as it doesn't
get seriously deployed.
- `eth/65` added more efficient transaction pool methods.
- Then a later version of `eth/65` (without a new number) added typed
transactions, described in [EIP-2976](https://eips.ethereum.org/EIPS/eip-2976).
Why it's moved to `nimbus-eth1`:
- Mainly because `eth/64` onwards depend on the current state of block
synchronisation, as well as the blockchain's sequence of hard-fork block
numbers, both of which are part of `nimbus-eth1` run-time state. These
aren't available to pure `nim-eth` code. Although it would be possible to
add an API to let `nimbus-eth1` set these numbers, there isn't any point
because the protocol would still only be useful to `nimbus-eth1`.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
2021-07-21 20:00:03 +00:00
|
|
|
|
|
|
|
requestResponse:
|
|
|
|
# User message 0x09: GetPooledTransactions.
|
2022-05-17 11:09:49 +00:00
|
|
|
proc getPooledTransactions(peer: Peer, txHashes: openArray[Hash256]) =
|
2022-05-23 16:53:19 +00:00
|
|
|
trace trEthRecvReceived & "GetPooledTransactions (0x09)", peer,
|
|
|
|
hashes=txHashes.len
|
2021-07-26 22:28:27 +00:00
|
|
|
|
2022-10-10 02:31:28 +00:00
|
|
|
let ctx = peer.networkState()
|
|
|
|
let txs = ctx.getPooledTxs(txHashes)
|
2024-02-19 11:46:48 +00:00
|
|
|
handleHandlerError(txs)
|
|
|
|
if txs.get.len > 0:
|
2022-10-10 02:31:28 +00:00
|
|
|
trace trEthSendReplying & "with PooledTransactions (0x0a)", peer,
|
2024-02-19 11:46:48 +00:00
|
|
|
sent=txs.get.len, requested=txHashes.len
|
2022-10-10 02:31:28 +00:00
|
|
|
else:
|
|
|
|
trace trEthSendReplying & "EMPTY PooledTransactions (0x0a)", peer,
|
|
|
|
sent=0, requested=txHashes.len
|
|
|
|
|
2024-02-19 11:46:48 +00:00
|
|
|
await response.send(txs.get)
|
Sync: Support for `eth/65` protocol
This patch adds the `eth/65` protocol, documented at
https://github.com/ethereum/devp2p/blob/master/caps/eth.md.
This is an intentionally simple patch, designed to not break, change or depend
on other functionality much, so that the "_old_ sync" methods can be run
usefully again and observed. This patch isn't "new sync" (a different set of
sync algorithms), but it is one of the foundations.
For a while now Nimbus Eth1 only supported protocol `eth/63`. But that's
obsolete, and very few nodes still support it. This meant Nimbus Eth1 would
make slow progress trying to sync, as most up to date clients rejected it.
The current specification is `eth/66`, and the functionality we really need is
in `eth/64`.
So why `eth/65`?
- `eth/64` is essential because of the `forkId` feature. But `eth/64` is on
its way out as well. Many clients, especially the most up to date Geth
running the current hard-forks (Berlin/London) don't talk `eth/64` any more.
- `eth/66` is the current specification, but some clients don't talk `eth/66`
yet. We'd like to have the best peer connectivity during tests, and
currently everything that talks `eth/66` also talks `eth/65`.
- Nimbus Eth1 RLPx only talks one version at a time. (Without changes to the
RLPx module. When those go in we'll add `eth/64..eth/66` for greater peer
reach and testing the `eth/66` behaviour. For simplicity and decoupling,
this patch contains just one version, the most useful.)
What are `eth/64` and `eth/65`?
- `eth/64` (EIP-2364) added `forkId` which allows nodes to distinguish between
Ethereum (ETH) and Ethereum Classic (ETC) blockchains, which share the same
genesis block. `forkId` also protects the system when a new hard fork is
going to be rolled out, by blocking interaction with out of date nodes. The
feature is required nowadays.
We send the right details to allow connection (this has been tested a lot),
but don't apply the full validation rules of EIP-2124/EIP-2364 in this patch.
It's to keep this patch simple (in its effects) and because those rules have
consequences best tested separately. In practice the other node will reject
us when we would reject it, so this is ok for testing, as long as it doesn't
get seriously deployed.
- `eth/65` added more efficient transaction pool methods.
- Then a later version of `eth/65` (without a new number) added typed
transactions, described in [EIP-2976](https://eips.ethereum.org/EIPS/eip-2976).
Why it's moved to `nimbus-eth1`:
- Mainly because `eth/64` onwards depend on the current state of block
synchronisation, as well as the blockchain's sequence of hard-fork block
numbers, both of which are part of `nimbus-eth1` run-time state. These
aren't available to pure `nim-eth` code. Although it would be possible to
add an API to let `nimbus-eth1` set these numbers, there isn't any point
because the protocol would still only be useful to `nimbus-eth1`.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
2021-07-21 20:00:03 +00:00
|
|
|
|
|
|
|
# User message 0x0a: PooledTransactions.
|
|
|
|
proc pooledTransactions(peer: Peer, transactions: openArray[Transaction])
|
|
|
|
|
|
|
|
nextId 0x0d
|
|
|
|
|
2022-05-09 14:04:48 +00:00
|
|
|
# User message 0x0d: GetNodeData.
|
2022-05-17 11:09:49 +00:00
|
|
|
proc getNodeData(peer: Peer, nodeHashes: openArray[Hash256]) =
|
2022-10-10 02:31:28 +00:00
|
|
|
trace trEthRecvReceived & "GetNodeData (0x0d)", peer,
|
2022-05-17 11:09:49 +00:00
|
|
|
hashes=nodeHashes.len
|
2022-05-09 14:04:48 +00:00
|
|
|
|
2022-10-10 02:31:28 +00:00
|
|
|
let ctx = peer.networkState()
|
|
|
|
let data = ctx.getStorageNodes(nodeHashes)
|
2024-02-19 11:46:48 +00:00
|
|
|
handleHandlerError(data)
|
2022-05-09 14:04:48 +00:00
|
|
|
|
2022-10-10 02:31:28 +00:00
|
|
|
trace trEthSendReplying & "NodeData (0x0e)", peer,
|
2024-02-19 11:46:48 +00:00
|
|
|
sent=data.get.len, requested=nodeHashes.len
|
2022-05-09 14:04:48 +00:00
|
|
|
|
2024-02-19 11:46:48 +00:00
|
|
|
await peer.nodeData(data.get)
|
2022-05-09 14:04:48 +00:00
|
|
|
|
|
|
|
# User message 0x0e: NodeData.
|
|
|
|
proc nodeData(peer: Peer, data: openArray[Blob]) =
|
2022-10-10 02:31:28 +00:00
|
|
|
trace trEthRecvReceived & "NodeData (0x0e)", peer,
|
2022-05-09 14:04:48 +00:00
|
|
|
bytes=data.len
|
2022-10-10 02:31:28 +00:00
|
|
|
let ctx = peer.networkState()
|
2024-02-19 11:46:48 +00:00
|
|
|
let res = ctx.handleNodeData(peer, data)
|
|
|
|
handleHandlerError(res)
|
Sync: Support for `eth/65` protocol
This patch adds the `eth/65` protocol, documented at
https://github.com/ethereum/devp2p/blob/master/caps/eth.md.
This is an intentionally simple patch, designed to not break, change or depend
on other functionality much, so that the "_old_ sync" methods can be run
usefully again and observed. This patch isn't "new sync" (a different set of
sync algorithms), but it is one of the foundations.
For a while now Nimbus Eth1 only supported protocol `eth/63`. But that's
obsolete, and very few nodes still support it. This meant Nimbus Eth1 would
make slow progress trying to sync, as most up to date clients rejected it.
The current specification is `eth/66`, and the functionality we really need is
in `eth/64`.
So why `eth/65`?
- `eth/64` is essential because of the `forkId` feature. But `eth/64` is on
its way out as well. Many clients, especially the most up to date Geth
running the current hard-forks (Berlin/London) don't talk `eth/64` any more.
- `eth/66` is the current specification, but some clients don't talk `eth/66`
yet. We'd like to have the best peer connectivity during tests, and
currently everything that talks `eth/66` also talks `eth/65`.
- Nimbus Eth1 RLPx only talks one version at a time. (Without changes to the
RLPx module. When those go in we'll add `eth/64..eth/66` for greater peer
reach and testing the `eth/66` behaviour. For simplicity and decoupling,
this patch contains just one version, the most useful.)
What are `eth/64` and `eth/65`?
- `eth/64` (EIP-2364) added `forkId` which allows nodes to distinguish between
Ethereum (ETH) and Ethereum Classic (ETC) blockchains, which share the same
genesis block. `forkId` also protects the system when a new hard fork is
going to be rolled out, by blocking interaction with out of date nodes. The
feature is required nowadays.
We send the right details to allow connection (this has been tested a lot),
but don't apply the full validation rules of EIP-2124/EIP-2364 in this patch.
It's to keep this patch simple (in its effects) and because those rules have
consequences best tested separately. In practice the other node will reject
us when we would reject it, so this is ok for testing, as long as it doesn't
get seriously deployed.
- `eth/65` added more efficient transaction pool methods.
- Then a later version of `eth/65` (without a new number) added typed
transactions, described in [EIP-2976](https://eips.ethereum.org/EIPS/eip-2976).
Why it's moved to `nimbus-eth1`:
- Mainly because `eth/64` onwards depend on the current state of block
synchronisation, as well as the blockchain's sequence of hard-fork block
numbers, both of which are part of `nimbus-eth1` run-time state. These
aren't available to pure `nim-eth` code. Although it would be possible to
add an API to let `nimbus-eth1` set these numbers, there isn't any point
because the protocol would still only be useful to `nimbus-eth1`.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
2021-07-21 20:00:03 +00:00
|
|
|
|
|
|
|
requestResponse:
|
|
|
|
# User message 0x0f: GetReceipts.
|
2022-05-17 11:09:49 +00:00
|
|
|
proc getReceipts(peer: Peer, hashes: openArray[Hash256]) =
|
2022-05-23 16:53:19 +00:00
|
|
|
trace trEthRecvReceived & "GetReceipts (0x0f)", peer,
|
2022-05-17 11:09:49 +00:00
|
|
|
hashes=hashes.len
|
2021-07-26 22:28:27 +00:00
|
|
|
|
2022-10-10 02:31:28 +00:00
|
|
|
let ctx = peer.networkState()
|
|
|
|
let rec = ctx.getReceipts(hashes)
|
2024-02-19 11:46:48 +00:00
|
|
|
handleHandlerError(rec)
|
|
|
|
if rec.get.len > 0:
|
2022-10-10 02:31:28 +00:00
|
|
|
trace trEthSendReplying & "with Receipts (0x10)", peer,
|
2024-02-19 11:46:48 +00:00
|
|
|
sent=rec.get.len, requested=hashes.len
|
2022-10-10 02:31:28 +00:00
|
|
|
else:
|
|
|
|
trace trEthSendReplying & "EMPTY Receipts (0x10)", peer,
|
|
|
|
sent=0, requested=hashes.len
|
|
|
|
|
2024-02-19 11:46:48 +00:00
|
|
|
await response.send(rec.get)
|
Sync: Support for `eth/65` protocol
This patch adds the `eth/65` protocol, documented at
https://github.com/ethereum/devp2p/blob/master/caps/eth.md.
This is an intentionally simple patch, designed to not break, change or depend
on other functionality much, so that the "_old_ sync" methods can be run
usefully again and observed. This patch isn't "new sync" (a different set of
sync algorithms), but it is one of the foundations.
For a while now Nimbus Eth1 only supported protocol `eth/63`. But that's
obsolete, and very few nodes still support it. This meant Nimbus Eth1 would
make slow progress trying to sync, as most up to date clients rejected it.
The current specification is `eth/66`, and the functionality we really need is
in `eth/64`.
So why `eth/65`?
- `eth/64` is essential because of the `forkId` feature. But `eth/64` is on
its way out as well. Many clients, especially the most up to date Geth
running the current hard-forks (Berlin/London) don't talk `eth/64` any more.
- `eth/66` is the current specification, but some clients don't talk `eth/66`
yet. We'd like to have the best peer connectivity during tests, and
currently everything that talks `eth/66` also talks `eth/65`.
- Nimbus Eth1 RLPx only talks one version at a time. (Without changes to the
RLPx module. When those go in we'll add `eth/64..eth/66` for greater peer
reach and testing the `eth/66` behaviour. For simplicity and decoupling,
this patch contains just one version, the most useful.)
What are `eth/64` and `eth/65`?
- `eth/64` (EIP-2364) added `forkId` which allows nodes to distinguish between
Ethereum (ETH) and Ethereum Classic (ETC) blockchains, which share the same
genesis block. `forkId` also protects the system when a new hard fork is
going to be rolled out, by blocking interaction with out of date nodes. The
feature is required nowadays.
We send the right details to allow connection (this has been tested a lot),
but don't apply the full validation rules of EIP-2124/EIP-2364 in this patch.
It's to keep this patch simple (in its effects) and because those rules have
consequences best tested separately. In practice the other node will reject
us when we would reject it, so this is ok for testing, as long as it doesn't
get seriously deployed.
- `eth/65` added more efficient transaction pool methods.
- Then a later version of `eth/65` (without a new number) added typed
transactions, described in [EIP-2976](https://eips.ethereum.org/EIPS/eip-2976).
Why it's moved to `nimbus-eth1`:
- Mainly because `eth/64` onwards depend on the current state of block
synchronisation, as well as the blockchain's sequence of hard-fork block
numbers, both of which are part of `nimbus-eth1` run-time state. These
aren't available to pure `nim-eth` code. Although it would be possible to
add an API to let `nimbus-eth1` set these numbers, there isn't any point
because the protocol would still only be useful to `nimbus-eth1`.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
2021-07-21 20:00:03 +00:00
|
|
|
|
|
|
|
# User message 0x10: Receipts.
|
2022-10-10 02:31:28 +00:00
|
|
|
proc receipts(peer: Peer, receipts: openArray[seq[Receipt]])
|