2024-09-09 09:12:56 +00:00
|
|
|
# Nimbus
|
|
|
|
|
# Copyright (c) 2021-2024 Status Research & Development GmbH
|
|
|
|
|
# Licensed and distributed under either of
|
|
|
|
|
# * MIT license (license terms in the root directory or at
|
|
|
|
|
# https://opensource.org/licenses/MIT).
|
|
|
|
|
# * Apache v2 license (license terms in the root directory or at
|
|
|
|
|
# https://www.apache.org/licenses/LICENSE-2.0).
|
|
|
|
|
# at your option. This file may not be copied, modified, or distributed
|
|
|
|
|
# except according to those terms.
|
|
|
|
|
|
|
|
|
|
{.push raises:[].}
|
|
|
|
|
|
|
|
|
|
import
|
Flare sync (#2627)
* Cosmetics, small fixes, add stashed headers verifier
* Remove direct `Era1` support
why:
Era1 is indirectly supported by using the import tool before syncing.
* Clarify database persistent save function.
why:
Function relied on the last saved state block number which was wrong.
It now relies on the tx-level. If it is 0, then data are saved directly.
Otherwise the task that owns the tx will do it.
* Extracted configuration constants into separate file
* Enable single peer mode for debugging
* Fix peer losing issue in multi-mode
details:
Running concurrent download peers was previously programmed as running
a batch downloading and storing ~8k headers and then leaving the `async`
function to be restarted by a scheduler.
This was unfortunate because of occasionally occurring long waiting
times for restart.
While the time gap until restarting were typically observed a few
millisecs, there were always a few outliers which well exceed several
seconds. This seemed to let remote peers run into timeouts.
* Prefix function names `unprocXxx()` and `stagedYyy()` by `headers`
why:
There will be other `unproc` and `staged` modules.
* Remove cruft, update logging
* Fix accounting issue
details:
When staging after fetching headers from the network, there was an off
by 1 error occurring when the result was by one smaller than requested.
Also, a whole range was mis-accounted when a peer was terminating
connection immediately after responding.
* Fix slow/error header accounting when fetching
why:
Originally set for detecting slow headers in a row, the counter
was wrongly extended to general errors.
* Ban peers for a while that respond with too few headers continuously
why:
Some peers only returned one header at a time. If these peers sit on a
farm, they might collectively slow down the download process.
* Update RPC beacon header updater
why:
Old function hook has slightly changed its meaning since it was used
for snap sync. Also, the old hook is used by other functions already.
* Limit number of peers or set to single peer mode
details:
Merge several concepts, single peer mode being one of it.
* Some code clean up, fixings for removing of compiler warnings
* De-noise header fetch related sources
why:
Header download looks relatively stable, so general debugging is not
needed, anymore. This is the equivalent of removing the scaffold from
the part of the building where work has completed.
* More clean up and code prettification for headers stuff
* Implement body fetch and block import
details:
Available headers are used stage blocks by combining existing headers
with newly fetched blocks. Then these blocks are imported/executed via
`persistBlocks()`.
* Logger cosmetics and cleanup
* Remove staged block queue debugging
details:
Feature still available, just not executed anymore
* Docu, logging update
* Update/simplify `runDaemon()`
* Re-calibrate block body requests and soft config for import blocks batch
why:
* For fetching, larger fetch requests are mostly truncated anyway on
MainNet.
* For executing, smaller batch sizes reduce the memory needed for the
price of longer execution times.
* Update metrics counters
* Docu update
* Some fixes, formatting updates, etc.
* Update `borrowed` type: uint -. uint64
also:
Always convert to `uint64` rather than `uint` where appropriate
2024-09-27 15:07:42 +00:00
|
|
|
pkg/chronos,
|
2024-09-09 09:12:56 +00:00
|
|
|
pkg/stew/[interval_set, sorted_set],
|
Flare sync (#2627)
* Cosmetics, small fixes, add stashed headers verifier
* Remove direct `Era1` support
why:
Era1 is indirectly supported by using the import tool before syncing.
* Clarify database persistent save function.
why:
Function relied on the last saved state block number which was wrong.
It now relies on the tx-level. If it is 0, then data are saved directly.
Otherwise the task that owns the tx will do it.
* Extracted configuration constants into separate file
* Enable single peer mode for debugging
* Fix peer losing issue in multi-mode
details:
Running concurrent download peers was previously programmed as running
a batch downloading and storing ~8k headers and then leaving the `async`
function to be restarted by a scheduler.
This was unfortunate because of occasionally occurring long waiting
times for restart.
While the time gap until restarting were typically observed a few
millisecs, there were always a few outliers which well exceed several
seconds. This seemed to let remote peers run into timeouts.
* Prefix function names `unprocXxx()` and `stagedYyy()` by `headers`
why:
There will be other `unproc` and `staged` modules.
* Remove cruft, update logging
* Fix accounting issue
details:
When staging after fetching headers from the network, there was an off
by 1 error occurring when the result was by one smaller than requested.
Also, a whole range was mis-accounted when a peer was terminating
connection immediately after responding.
* Fix slow/error header accounting when fetching
why:
Originally set for detecting slow headers in a row, the counter
was wrongly extended to general errors.
* Ban peers for a while that respond with too few headers continuously
why:
Some peers only returned one header at a time. If these peers sit on a
farm, they might collectively slow down the download process.
* Update RPC beacon header updater
why:
Old function hook has slightly changed its meaning since it was used
for snap sync. Also, the old hook is used by other functions already.
* Limit number of peers or set to single peer mode
details:
Merge several concepts, single peer mode being one of it.
* Some code clean up, fixings for removing of compiler warnings
* De-noise header fetch related sources
why:
Header download looks relatively stable, so general debugging is not
needed, anymore. This is the equivalent of removing the scaffold from
the part of the building where work has completed.
* More clean up and code prettification for headers stuff
* Implement body fetch and block import
details:
Available headers are used stage blocks by combining existing headers
with newly fetched blocks. Then these blocks are imported/executed via
`persistBlocks()`.
* Logger cosmetics and cleanup
* Remove staged block queue debugging
details:
Feature still available, just not executed anymore
* Docu, logging update
* Update/simplify `runDaemon()`
* Re-calibrate block body requests and soft config for import blocks batch
why:
* For fetching, larger fetch requests are mostly truncated anyway on
MainNet.
* For executing, smaller batch sizes reduce the memory needed for the
price of longer execution times.
* Update metrics counters
* Docu update
* Some fixes, formatting updates, etc.
* Update `borrowed` type: uint -. uint64
also:
Always convert to `uint64` rather than `uint` where appropriate
2024-09-27 15:07:42 +00:00
|
|
|
../sync_desc,
|
|
|
|
|
./worker_config
|
2024-09-09 09:12:56 +00:00
|
|
|
|
|
|
|
|
export
|
Flare sync (#2627)
* Cosmetics, small fixes, add stashed headers verifier
* Remove direct `Era1` support
why:
Era1 is indirectly supported by using the import tool before syncing.
* Clarify database persistent save function.
why:
Function relied on the last saved state block number which was wrong.
It now relies on the tx-level. If it is 0, then data are saved directly.
Otherwise the task that owns the tx will do it.
* Extracted configuration constants into separate file
* Enable single peer mode for debugging
* Fix peer losing issue in multi-mode
details:
Running concurrent download peers was previously programmed as running
a batch downloading and storing ~8k headers and then leaving the `async`
function to be restarted by a scheduler.
This was unfortunate because of occasionally occurring long waiting
times for restart.
While the time gap until restarting were typically observed a few
millisecs, there were always a few outliers which well exceed several
seconds. This seemed to let remote peers run into timeouts.
* Prefix function names `unprocXxx()` and `stagedYyy()` by `headers`
why:
There will be other `unproc` and `staged` modules.
* Remove cruft, update logging
* Fix accounting issue
details:
When staging after fetching headers from the network, there was an off
by 1 error occurring when the result was by one smaller than requested.
Also, a whole range was mis-accounted when a peer was terminating
connection immediately after responding.
* Fix slow/error header accounting when fetching
why:
Originally set for detecting slow headers in a row, the counter
was wrongly extended to general errors.
* Ban peers for a while that respond with too few headers continuously
why:
Some peers only returned one header at a time. If these peers sit on a
farm, they might collectively slow down the download process.
* Update RPC beacon header updater
why:
Old function hook has slightly changed its meaning since it was used
for snap sync. Also, the old hook is used by other functions already.
* Limit number of peers or set to single peer mode
details:
Merge several concepts, single peer mode being one of it.
* Some code clean up, fixings for removing of compiler warnings
* De-noise header fetch related sources
why:
Header download looks relatively stable, so general debugging is not
needed, anymore. This is the equivalent of removing the scaffold from
the part of the building where work has completed.
* More clean up and code prettification for headers stuff
* Implement body fetch and block import
details:
Available headers are used stage blocks by combining existing headers
with newly fetched blocks. Then these blocks are imported/executed via
`persistBlocks()`.
* Logger cosmetics and cleanup
* Remove staged block queue debugging
details:
Feature still available, just not executed anymore
* Docu, logging update
* Update/simplify `runDaemon()`
* Re-calibrate block body requests and soft config for import blocks batch
why:
* For fetching, larger fetch requests are mostly truncated anyway on
MainNet.
* For executing, smaller batch sizes reduce the memory needed for the
price of longer execution times.
* Update metrics counters
* Docu update
* Some fixes, formatting updates, etc.
* Update `borrowed` type: uint -. uint64
also:
Always convert to `uint64` rather than `uint` where appropriate
2024-09-27 15:07:42 +00:00
|
|
|
sync_desc, worker_config
|
2024-09-09 09:12:56 +00:00
|
|
|
|
|
|
|
|
when enableTicker:
|
|
|
|
|
import ./worker/start_stop/ticker
|
|
|
|
|
|
|
|
|
|
type
|
|
|
|
|
BnRangeSet* = IntervalSetRef[BlockNumber,uint64]
|
|
|
|
|
## Disjunct sets of block number intervals
|
|
|
|
|
|
|
|
|
|
BnRange* = Interval[BlockNumber,uint64]
|
|
|
|
|
## Single block number interval
|
|
|
|
|
|
|
|
|
|
LinkedHChainQueue* = SortedSet[BlockNumber,LinkedHChain]
|
|
|
|
|
## Block intervals sorted by largest block number.
|
|
|
|
|
|
|
|
|
|
LinkedHChain* = object
|
2024-09-10 11:37:49 +00:00
|
|
|
## Public block items for the `LinkedHChainQueue` list, indexed by the
|
|
|
|
|
## largest block number. The list `revHdrs[]` is reversed, i.e. the largest
|
|
|
|
|
## block number has the least index `0`. This makes it easier to grow the
|
|
|
|
|
## sequence with parent headers, i.e. decreasing block numbers.
|
2024-09-09 09:12:56 +00:00
|
|
|
##
|
2024-09-10 11:37:49 +00:00
|
|
|
hash*: Hash256 ## Hash of `headers[0]`
|
|
|
|
|
revHdrs*: seq[Blob] ## Encoded linked header chain
|
|
|
|
|
parentHash*: Hash256 ## Parent hash of `headers[^1]`
|
2024-09-09 09:12:56 +00:00
|
|
|
|
Flare sync (#2627)
* Cosmetics, small fixes, add stashed headers verifier
* Remove direct `Era1` support
why:
Era1 is indirectly supported by using the import tool before syncing.
* Clarify database persistent save function.
why:
Function relied on the last saved state block number which was wrong.
It now relies on the tx-level. If it is 0, then data are saved directly.
Otherwise the task that owns the tx will do it.
* Extracted configuration constants into separate file
* Enable single peer mode for debugging
* Fix peer losing issue in multi-mode
details:
Running concurrent download peers was previously programmed as running
a batch downloading and storing ~8k headers and then leaving the `async`
function to be restarted by a scheduler.
This was unfortunate because of occasionally occurring long waiting
times for restart.
While the time gap until restarting were typically observed a few
millisecs, there were always a few outliers which well exceed several
seconds. This seemed to let remote peers run into timeouts.
* Prefix function names `unprocXxx()` and `stagedYyy()` by `headers`
why:
There will be other `unproc` and `staged` modules.
* Remove cruft, update logging
* Fix accounting issue
details:
When staging after fetching headers from the network, there was an off
by 1 error occurring when the result was by one smaller than requested.
Also, a whole range was mis-accounted when a peer was terminating
connection immediately after responding.
* Fix slow/error header accounting when fetching
why:
Originally set for detecting slow headers in a row, the counter
was wrongly extended to general errors.
* Ban peers for a while that respond with too few headers continuously
why:
Some peers only returned one header at a time. If these peers sit on a
farm, they might collectively slow down the download process.
* Update RPC beacon header updater
why:
Old function hook has slightly changed its meaning since it was used
for snap sync. Also, the old hook is used by other functions already.
* Limit number of peers or set to single peer mode
details:
Merge several concepts, single peer mode being one of it.
* Some code clean up, fixings for removing of compiler warnings
* De-noise header fetch related sources
why:
Header download looks relatively stable, so general debugging is not
needed, anymore. This is the equivalent of removing the scaffold from
the part of the building where work has completed.
* More clean up and code prettification for headers stuff
* Implement body fetch and block import
details:
Available headers are used stage blocks by combining existing headers
with newly fetched blocks. Then these blocks are imported/executed via
`persistBlocks()`.
* Logger cosmetics and cleanup
* Remove staged block queue debugging
details:
Feature still available, just not executed anymore
* Docu, logging update
* Update/simplify `runDaemon()`
* Re-calibrate block body requests and soft config for import blocks batch
why:
* For fetching, larger fetch requests are mostly truncated anyway on
MainNet.
* For executing, smaller batch sizes reduce the memory needed for the
price of longer execution times.
* Update metrics counters
* Docu update
* Some fixes, formatting updates, etc.
* Update `borrowed` type: uint -. uint64
also:
Always convert to `uint64` rather than `uint` where appropriate
2024-09-27 15:07:42 +00:00
|
|
|
StagedBlocksQueue* = SortedSet[BlockNumber,BlocksForImport]
|
|
|
|
|
## Blocks sorted by least block number.
|
|
|
|
|
|
|
|
|
|
BlocksForImport* = object
|
|
|
|
|
## Block request item sorted by least block number (i.e. from `blocks[0]`.)
|
|
|
|
|
blocks*: seq[EthBlock] ## List of blocks for import
|
|
|
|
|
|
2024-09-09 09:12:56 +00:00
|
|
|
# -------------------
|
|
|
|
|
|
|
|
|
|
LinkedHChainsLayout* = object
|
|
|
|
|
## Layout of a triple of linked header chains
|
|
|
|
|
## ::
|
|
|
|
|
## G B L F
|
|
|
|
|
## o----------------o---------------------o----------------o--->
|
|
|
|
|
## | <-- linked --> | <-- unprocessed --> | <-- linked --> |
|
|
|
|
|
##
|
|
|
|
|
## see `README.md` for details and explanations
|
|
|
|
|
##
|
|
|
|
|
base*: BlockNumber
|
|
|
|
|
## `B`, maximal block number of linked chain starting at Genesis `G`
|
|
|
|
|
baseHash*: Hash256
|
|
|
|
|
## Hash of `B`
|
|
|
|
|
|
|
|
|
|
least*: BlockNumber
|
|
|
|
|
## `L`, minimal block number of linked chain ending at `F` with `B <= L`
|
|
|
|
|
leastParent*: Hash256
|
|
|
|
|
## Parent hash of `L` (similar to `parentHash` in `HeaderChainItemRef`)
|
|
|
|
|
|
|
|
|
|
final*: BlockNumber
|
|
|
|
|
## `F`, some finalised block
|
|
|
|
|
finalHash*: Hash256
|
|
|
|
|
## Hash of `F` (similar to `hash` in `HeaderChainItemRef`)
|
|
|
|
|
|
|
|
|
|
BeaconHeader* = object
|
|
|
|
|
## Beacon state to be implicitely updated by RPC method
|
|
|
|
|
changed*: bool ## Set a marker if something has changed
|
Flare sync (#2627)
* Cosmetics, small fixes, add stashed headers verifier
* Remove direct `Era1` support
why:
Era1 is indirectly supported by using the import tool before syncing.
* Clarify database persistent save function.
why:
Function relied on the last saved state block number which was wrong.
It now relies on the tx-level. If it is 0, then data are saved directly.
Otherwise the task that owns the tx will do it.
* Extracted configuration constants into separate file
* Enable single peer mode for debugging
* Fix peer losing issue in multi-mode
details:
Running concurrent download peers was previously programmed as running
a batch downloading and storing ~8k headers and then leaving the `async`
function to be restarted by a scheduler.
This was unfortunate because of occasionally occurring long waiting
times for restart.
While the time gap until restarting were typically observed a few
millisecs, there were always a few outliers which well exceed several
seconds. This seemed to let remote peers run into timeouts.
* Prefix function names `unprocXxx()` and `stagedYyy()` by `headers`
why:
There will be other `unproc` and `staged` modules.
* Remove cruft, update logging
* Fix accounting issue
details:
When staging after fetching headers from the network, there was an off
by 1 error occurring when the result was by one smaller than requested.
Also, a whole range was mis-accounted when a peer was terminating
connection immediately after responding.
* Fix slow/error header accounting when fetching
why:
Originally set for detecting slow headers in a row, the counter
was wrongly extended to general errors.
* Ban peers for a while that respond with too few headers continuously
why:
Some peers only returned one header at a time. If these peers sit on a
farm, they might collectively slow down the download process.
* Update RPC beacon header updater
why:
Old function hook has slightly changed its meaning since it was used
for snap sync. Also, the old hook is used by other functions already.
* Limit number of peers or set to single peer mode
details:
Merge several concepts, single peer mode being one of it.
* Some code clean up, fixings for removing of compiler warnings
* De-noise header fetch related sources
why:
Header download looks relatively stable, so general debugging is not
needed, anymore. This is the equivalent of removing the scaffold from
the part of the building where work has completed.
* More clean up and code prettification for headers stuff
* Implement body fetch and block import
details:
Available headers are used stage blocks by combining existing headers
with newly fetched blocks. Then these blocks are imported/executed via
`persistBlocks()`.
* Logger cosmetics and cleanup
* Remove staged block queue debugging
details:
Feature still available, just not executed anymore
* Docu, logging update
* Update/simplify `runDaemon()`
* Re-calibrate block body requests and soft config for import blocks batch
why:
* For fetching, larger fetch requests are mostly truncated anyway on
MainNet.
* For executing, smaller batch sizes reduce the memory needed for the
price of longer execution times.
* Update metrics counters
* Docu update
* Some fixes, formatting updates, etc.
* Update `borrowed` type: uint -. uint64
also:
Always convert to `uint64` rather than `uint` where appropriate
2024-09-27 15:07:42 +00:00
|
|
|
header*: BlockHeader ## Beacon chain, finalised header
|
|
|
|
|
finalised*: Hash256 ## From RPC, ghash of finalised header
|
2024-09-09 09:12:56 +00:00
|
|
|
|
|
|
|
|
LinkedHChainsSync* = object
|
|
|
|
|
## Sync state for linked header chains
|
|
|
|
|
beacon*: BeaconHeader ## See `Z` in README
|
|
|
|
|
unprocessed*: BnRangeSet ## Block or header ranges to fetch
|
Flare sync (#2627)
* Cosmetics, small fixes, add stashed headers verifier
* Remove direct `Era1` support
why:
Era1 is indirectly supported by using the import tool before syncing.
* Clarify database persistent save function.
why:
Function relied on the last saved state block number which was wrong.
It now relies on the tx-level. If it is 0, then data are saved directly.
Otherwise the task that owns the tx will do it.
* Extracted configuration constants into separate file
* Enable single peer mode for debugging
* Fix peer losing issue in multi-mode
details:
Running concurrent download peers was previously programmed as running
a batch downloading and storing ~8k headers and then leaving the `async`
function to be restarted by a scheduler.
This was unfortunate because of occasionally occurring long waiting
times for restart.
While the time gap until restarting were typically observed a few
millisecs, there were always a few outliers which well exceed several
seconds. This seemed to let remote peers run into timeouts.
* Prefix function names `unprocXxx()` and `stagedYyy()` by `headers`
why:
There will be other `unproc` and `staged` modules.
* Remove cruft, update logging
* Fix accounting issue
details:
When staging after fetching headers from the network, there was an off
by 1 error occurring when the result was by one smaller than requested.
Also, a whole range was mis-accounted when a peer was terminating
connection immediately after responding.
* Fix slow/error header accounting when fetching
why:
Originally set for detecting slow headers in a row, the counter
was wrongly extended to general errors.
* Ban peers for a while that respond with too few headers continuously
why:
Some peers only returned one header at a time. If these peers sit on a
farm, they might collectively slow down the download process.
* Update RPC beacon header updater
why:
Old function hook has slightly changed its meaning since it was used
for snap sync. Also, the old hook is used by other functions already.
* Limit number of peers or set to single peer mode
details:
Merge several concepts, single peer mode being one of it.
* Some code clean up, fixings for removing of compiler warnings
* De-noise header fetch related sources
why:
Header download looks relatively stable, so general debugging is not
needed, anymore. This is the equivalent of removing the scaffold from
the part of the building where work has completed.
* More clean up and code prettification for headers stuff
* Implement body fetch and block import
details:
Available headers are used stage blocks by combining existing headers
with newly fetched blocks. Then these blocks are imported/executed via
`persistBlocks()`.
* Logger cosmetics and cleanup
* Remove staged block queue debugging
details:
Feature still available, just not executed anymore
* Docu, logging update
* Update/simplify `runDaemon()`
* Re-calibrate block body requests and soft config for import blocks batch
why:
* For fetching, larger fetch requests are mostly truncated anyway on
MainNet.
* For executing, smaller batch sizes reduce the memory needed for the
price of longer execution times.
* Update metrics counters
* Docu update
* Some fixes, formatting updates, etc.
* Update `borrowed` type: uint -. uint64
also:
Always convert to `uint64` rather than `uint` where appropriate
2024-09-27 15:07:42 +00:00
|
|
|
borrowed*: uint64 ## Total of temp. fetched ranges
|
2024-09-09 09:12:56 +00:00
|
|
|
staged*: LinkedHChainQueue ## Blocks fetched but not stored yet
|
|
|
|
|
layout*: LinkedHChainsLayout ## Current header chains layout
|
|
|
|
|
lastLayout*: LinkedHChainsLayout ## Previous layout (for delta update)
|
|
|
|
|
|
Flare sync (#2627)
* Cosmetics, small fixes, add stashed headers verifier
* Remove direct `Era1` support
why:
Era1 is indirectly supported by using the import tool before syncing.
* Clarify database persistent save function.
why:
Function relied on the last saved state block number which was wrong.
It now relies on the tx-level. If it is 0, then data are saved directly.
Otherwise the task that owns the tx will do it.
* Extracted configuration constants into separate file
* Enable single peer mode for debugging
* Fix peer losing issue in multi-mode
details:
Running concurrent download peers was previously programmed as running
a batch downloading and storing ~8k headers and then leaving the `async`
function to be restarted by a scheduler.
This was unfortunate because of occasionally occurring long waiting
times for restart.
While the time gap until restarting were typically observed a few
millisecs, there were always a few outliers which well exceed several
seconds. This seemed to let remote peers run into timeouts.
* Prefix function names `unprocXxx()` and `stagedYyy()` by `headers`
why:
There will be other `unproc` and `staged` modules.
* Remove cruft, update logging
* Fix accounting issue
details:
When staging after fetching headers from the network, there was an off
by 1 error occurring when the result was by one smaller than requested.
Also, a whole range was mis-accounted when a peer was terminating
connection immediately after responding.
* Fix slow/error header accounting when fetching
why:
Originally set for detecting slow headers in a row, the counter
was wrongly extended to general errors.
* Ban peers for a while that respond with too few headers continuously
why:
Some peers only returned one header at a time. If these peers sit on a
farm, they might collectively slow down the download process.
* Update RPC beacon header updater
why:
Old function hook has slightly changed its meaning since it was used
for snap sync. Also, the old hook is used by other functions already.
* Limit number of peers or set to single peer mode
details:
Merge several concepts, single peer mode being one of it.
* Some code clean up, fixings for removing of compiler warnings
* De-noise header fetch related sources
why:
Header download looks relatively stable, so general debugging is not
needed, anymore. This is the equivalent of removing the scaffold from
the part of the building where work has completed.
* More clean up and code prettification for headers stuff
* Implement body fetch and block import
details:
Available headers are used stage blocks by combining existing headers
with newly fetched blocks. Then these blocks are imported/executed via
`persistBlocks()`.
* Logger cosmetics and cleanup
* Remove staged block queue debugging
details:
Feature still available, just not executed anymore
* Docu, logging update
* Update/simplify `runDaemon()`
* Re-calibrate block body requests and soft config for import blocks batch
why:
* For fetching, larger fetch requests are mostly truncated anyway on
MainNet.
* For executing, smaller batch sizes reduce the memory needed for the
price of longer execution times.
* Update metrics counters
* Docu update
* Some fixes, formatting updates, etc.
* Update `borrowed` type: uint -. uint64
also:
Always convert to `uint64` rather than `uint` where appropriate
2024-09-27 15:07:42 +00:00
|
|
|
BlocksImportSync* = object
|
|
|
|
|
## Sync state for blocks to import/execute
|
|
|
|
|
unprocessed*: BnRangeSet ## Blocks download requested
|
|
|
|
|
borrowed*: uint64 ## Total of temp. fetched ranges
|
|
|
|
|
topRequest*: BlockNumber ## Max requested block number
|
|
|
|
|
staged*: StagedBlocksQueue ## Blocks ready for import
|
|
|
|
|
|
2024-09-09 09:12:56 +00:00
|
|
|
# -------------------
|
|
|
|
|
|
|
|
|
|
FlareBuddyData* = object
|
|
|
|
|
## Local descriptor data extension
|
Flare sync (#2627)
* Cosmetics, small fixes, add stashed headers verifier
* Remove direct `Era1` support
why:
Era1 is indirectly supported by using the import tool before syncing.
* Clarify database persistent save function.
why:
Function relied on the last saved state block number which was wrong.
It now relies on the tx-level. If it is 0, then data are saved directly.
Otherwise the task that owns the tx will do it.
* Extracted configuration constants into separate file
* Enable single peer mode for debugging
* Fix peer losing issue in multi-mode
details:
Running concurrent download peers was previously programmed as running
a batch downloading and storing ~8k headers and then leaving the `async`
function to be restarted by a scheduler.
This was unfortunate because of occasionally occurring long waiting
times for restart.
While the time gap until restarting were typically observed a few
millisecs, there were always a few outliers which well exceed several
seconds. This seemed to let remote peers run into timeouts.
* Prefix function names `unprocXxx()` and `stagedYyy()` by `headers`
why:
There will be other `unproc` and `staged` modules.
* Remove cruft, update logging
* Fix accounting issue
details:
When staging after fetching headers from the network, there was an off
by 1 error occurring when the result was by one smaller than requested.
Also, a whole range was mis-accounted when a peer was terminating
connection immediately after responding.
* Fix slow/error header accounting when fetching
why:
Originally set for detecting slow headers in a row, the counter
was wrongly extended to general errors.
* Ban peers for a while that respond with too few headers continuously
why:
Some peers only returned one header at a time. If these peers sit on a
farm, they might collectively slow down the download process.
* Update RPC beacon header updater
why:
Old function hook has slightly changed its meaning since it was used
for snap sync. Also, the old hook is used by other functions already.
* Limit number of peers or set to single peer mode
details:
Merge several concepts, single peer mode being one of it.
* Some code clean up, fixings for removing of compiler warnings
* De-noise header fetch related sources
why:
Header download looks relatively stable, so general debugging is not
needed, anymore. This is the equivalent of removing the scaffold from
the part of the building where work has completed.
* More clean up and code prettification for headers stuff
* Implement body fetch and block import
details:
Available headers are used stage blocks by combining existing headers
with newly fetched blocks. Then these blocks are imported/executed via
`persistBlocks()`.
* Logger cosmetics and cleanup
* Remove staged block queue debugging
details:
Feature still available, just not executed anymore
* Docu, logging update
* Update/simplify `runDaemon()`
* Re-calibrate block body requests and soft config for import blocks batch
why:
* For fetching, larger fetch requests are mostly truncated anyway on
MainNet.
* For executing, smaller batch sizes reduce the memory needed for the
price of longer execution times.
* Update metrics counters
* Docu update
* Some fixes, formatting updates, etc.
* Update `borrowed` type: uint -. uint64
also:
Always convert to `uint64` rather than `uint` where appropriate
2024-09-27 15:07:42 +00:00
|
|
|
nHdrRespErrors*: int ## Number of errors/slow responses in a row
|
|
|
|
|
nBdyRespErrors*: int ## Ditto for bodies
|
2024-09-09 09:12:56 +00:00
|
|
|
|
Flare sync (#2627)
* Cosmetics, small fixes, add stashed headers verifier
* Remove direct `Era1` support
why:
Era1 is indirectly supported by using the import tool before syncing.
* Clarify database persistent save function.
why:
Function relied on the last saved state block number which was wrong.
It now relies on the tx-level. If it is 0, then data are saved directly.
Otherwise the task that owns the tx will do it.
* Extracted configuration constants into separate file
* Enable single peer mode for debugging
* Fix peer losing issue in multi-mode
details:
Running concurrent download peers was previously programmed as running
a batch downloading and storing ~8k headers and then leaving the `async`
function to be restarted by a scheduler.
This was unfortunate because of occasionally occurring long waiting
times for restart.
While the time gap until restarting were typically observed a few
millisecs, there were always a few outliers which well exceed several
seconds. This seemed to let remote peers run into timeouts.
* Prefix function names `unprocXxx()` and `stagedYyy()` by `headers`
why:
There will be other `unproc` and `staged` modules.
* Remove cruft, update logging
* Fix accounting issue
details:
When staging after fetching headers from the network, there was an off
by 1 error occurring when the result was by one smaller than requested.
Also, a whole range was mis-accounted when a peer was terminating
connection immediately after responding.
* Fix slow/error header accounting when fetching
why:
Originally set for detecting slow headers in a row, the counter
was wrongly extended to general errors.
* Ban peers for a while that respond with too few headers continuously
why:
Some peers only returned one header at a time. If these peers sit on a
farm, they might collectively slow down the download process.
* Update RPC beacon header updater
why:
Old function hook has slightly changed its meaning since it was used
for snap sync. Also, the old hook is used by other functions already.
* Limit number of peers or set to single peer mode
details:
Merge several concepts, single peer mode being one of it.
* Some code clean up, fixings for removing of compiler warnings
* De-noise header fetch related sources
why:
Header download looks relatively stable, so general debugging is not
needed, anymore. This is the equivalent of removing the scaffold from
the part of the building where work has completed.
* More clean up and code prettification for headers stuff
* Implement body fetch and block import
details:
Available headers are used stage blocks by combining existing headers
with newly fetched blocks. Then these blocks are imported/executed via
`persistBlocks()`.
* Logger cosmetics and cleanup
* Remove staged block queue debugging
details:
Feature still available, just not executed anymore
* Docu, logging update
* Update/simplify `runDaemon()`
* Re-calibrate block body requests and soft config for import blocks batch
why:
* For fetching, larger fetch requests are mostly truncated anyway on
MainNet.
* For executing, smaller batch sizes reduce the memory needed for the
price of longer execution times.
* Update metrics counters
* Docu update
* Some fixes, formatting updates, etc.
* Update `borrowed` type: uint -. uint64
also:
Always convert to `uint64` rather than `uint` where appropriate
2024-09-27 15:07:42 +00:00
|
|
|
# Debugging and logging.
|
|
|
|
|
nMultiLoop*: int ## Number of runs
|
|
|
|
|
stoppedMultiRun*: chronos.Moment ## Time when run-multi stopped
|
|
|
|
|
multiRunIdle*: chronos.Duration ## Idle time between runs
|
2024-09-09 09:12:56 +00:00
|
|
|
|
|
|
|
|
FlareCtxData* = object
|
|
|
|
|
## Globally shared data extension
|
Flare sync (#2627)
* Cosmetics, small fixes, add stashed headers verifier
* Remove direct `Era1` support
why:
Era1 is indirectly supported by using the import tool before syncing.
* Clarify database persistent save function.
why:
Function relied on the last saved state block number which was wrong.
It now relies on the tx-level. If it is 0, then data are saved directly.
Otherwise the task that owns the tx will do it.
* Extracted configuration constants into separate file
* Enable single peer mode for debugging
* Fix peer losing issue in multi-mode
details:
Running concurrent download peers was previously programmed as running
a batch downloading and storing ~8k headers and then leaving the `async`
function to be restarted by a scheduler.
This was unfortunate because of occasionally occurring long waiting
times for restart.
While the time gap until restarting were typically observed a few
millisecs, there were always a few outliers which well exceed several
seconds. This seemed to let remote peers run into timeouts.
* Prefix function names `unprocXxx()` and `stagedYyy()` by `headers`
why:
There will be other `unproc` and `staged` modules.
* Remove cruft, update logging
* Fix accounting issue
details:
When staging after fetching headers from the network, there was an off
by 1 error occurring when the result was by one smaller than requested.
Also, a whole range was mis-accounted when a peer was terminating
connection immediately after responding.
* Fix slow/error header accounting when fetching
why:
Originally set for detecting slow headers in a row, the counter
was wrongly extended to general errors.
* Ban peers for a while that respond with too few headers continuously
why:
Some peers only returned one header at a time. If these peers sit on a
farm, they might collectively slow down the download process.
* Update RPC beacon header updater
why:
Old function hook has slightly changed its meaning since it was used
for snap sync. Also, the old hook is used by other functions already.
* Limit number of peers or set to single peer mode
details:
Merge several concepts, single peer mode being one of it.
* Some code clean up, fixings for removing of compiler warnings
* De-noise header fetch related sources
why:
Header download looks relatively stable, so general debugging is not
needed, anymore. This is the equivalent of removing the scaffold from
the part of the building where work has completed.
* More clean up and code prettification for headers stuff
* Implement body fetch and block import
details:
Available headers are used stage blocks by combining existing headers
with newly fetched blocks. Then these blocks are imported/executed via
`persistBlocks()`.
* Logger cosmetics and cleanup
* Remove staged block queue debugging
details:
Feature still available, just not executed anymore
* Docu, logging update
* Update/simplify `runDaemon()`
* Re-calibrate block body requests and soft config for import blocks batch
why:
* For fetching, larger fetch requests are mostly truncated anyway on
MainNet.
* For executing, smaller batch sizes reduce the memory needed for the
price of longer execution times.
* Update metrics counters
* Docu update
* Some fixes, formatting updates, etc.
* Update `borrowed` type: uint -. uint64
also:
Always convert to `uint64` rather than `uint` where appropriate
2024-09-27 15:07:42 +00:00
|
|
|
nBuddies*: int ## Number of active workers
|
2024-09-09 09:12:56 +00:00
|
|
|
lhcSyncState*: LinkedHChainsSync ## Syncing by linked header chains
|
Flare sync (#2627)
* Cosmetics, small fixes, add stashed headers verifier
* Remove direct `Era1` support
why:
Era1 is indirectly supported by using the import tool before syncing.
* Clarify database persistent save function.
why:
Function relied on the last saved state block number which was wrong.
It now relies on the tx-level. If it is 0, then data are saved directly.
Otherwise the task that owns the tx will do it.
* Extracted configuration constants into separate file
* Enable single peer mode for debugging
* Fix peer losing issue in multi-mode
details:
Running concurrent download peers was previously programmed as running
a batch downloading and storing ~8k headers and then leaving the `async`
function to be restarted by a scheduler.
This was unfortunate because of occasionally occurring long waiting
times for restart.
While the time gap until restarting were typically observed a few
millisecs, there were always a few outliers which well exceed several
seconds. This seemed to let remote peers run into timeouts.
* Prefix function names `unprocXxx()` and `stagedYyy()` by `headers`
why:
There will be other `unproc` and `staged` modules.
* Remove cruft, update logging
* Fix accounting issue
details:
When staging after fetching headers from the network, there was an off
by 1 error occurring when the result was by one smaller than requested.
Also, a whole range was mis-accounted when a peer was terminating
connection immediately after responding.
* Fix slow/error header accounting when fetching
why:
Originally set for detecting slow headers in a row, the counter
was wrongly extended to general errors.
* Ban peers for a while that respond with too few headers continuously
why:
Some peers only returned one header at a time. If these peers sit on a
farm, they might collectively slow down the download process.
* Update RPC beacon header updater
why:
Old function hook has slightly changed its meaning since it was used
for snap sync. Also, the old hook is used by other functions already.
* Limit number of peers or set to single peer mode
details:
Merge several concepts, single peer mode being one of it.
* Some code clean up, fixings for removing of compiler warnings
* De-noise header fetch related sources
why:
Header download looks relatively stable, so general debugging is not
needed, anymore. This is the equivalent of removing the scaffold from
the part of the building where work has completed.
* More clean up and code prettification for headers stuff
* Implement body fetch and block import
details:
Available headers are used stage blocks by combining existing headers
with newly fetched blocks. Then these blocks are imported/executed via
`persistBlocks()`.
* Logger cosmetics and cleanup
* Remove staged block queue debugging
details:
Feature still available, just not executed anymore
* Docu, logging update
* Update/simplify `runDaemon()`
* Re-calibrate block body requests and soft config for import blocks batch
why:
* For fetching, larger fetch requests are mostly truncated anyway on
MainNet.
* For executing, smaller batch sizes reduce the memory needed for the
price of longer execution times.
* Update metrics counters
* Docu update
* Some fixes, formatting updates, etc.
* Update `borrowed` type: uint -. uint64
also:
Always convert to `uint64` rather than `uint` where appropriate
2024-09-27 15:07:42 +00:00
|
|
|
blkSyncState*: BlocksImportSync ## For importing/executing blocks
|
2024-09-09 09:12:56 +00:00
|
|
|
nextUpdate*: Moment ## For updating metrics
|
|
|
|
|
|
Flare sync (#2627)
* Cosmetics, small fixes, add stashed headers verifier
* Remove direct `Era1` support
why:
Era1 is indirectly supported by using the import tool before syncing.
* Clarify database persistent save function.
why:
Function relied on the last saved state block number which was wrong.
It now relies on the tx-level. If it is 0, then data are saved directly.
Otherwise the task that owns the tx will do it.
* Extracted configuration constants into separate file
* Enable single peer mode for debugging
* Fix peer losing issue in multi-mode
details:
Running concurrent download peers was previously programmed as running
a batch downloading and storing ~8k headers and then leaving the `async`
function to be restarted by a scheduler.
This was unfortunate because of occasionally occurring long waiting
times for restart.
While the time gap until restarting were typically observed a few
millisecs, there were always a few outliers which well exceed several
seconds. This seemed to let remote peers run into timeouts.
* Prefix function names `unprocXxx()` and `stagedYyy()` by `headers`
why:
There will be other `unproc` and `staged` modules.
* Remove cruft, update logging
* Fix accounting issue
details:
When staging after fetching headers from the network, there was an off
by 1 error occurring when the result was by one smaller than requested.
Also, a whole range was mis-accounted when a peer was terminating
connection immediately after responding.
* Fix slow/error header accounting when fetching
why:
Originally set for detecting slow headers in a row, the counter
was wrongly extended to general errors.
* Ban peers for a while that respond with too few headers continuously
why:
Some peers only returned one header at a time. If these peers sit on a
farm, they might collectively slow down the download process.
* Update RPC beacon header updater
why:
Old function hook has slightly changed its meaning since it was used
for snap sync. Also, the old hook is used by other functions already.
* Limit number of peers or set to single peer mode
details:
Merge several concepts, single peer mode being one of it.
* Some code clean up, fixings for removing of compiler warnings
* De-noise header fetch related sources
why:
Header download looks relatively stable, so general debugging is not
needed, anymore. This is the equivalent of removing the scaffold from
the part of the building where work has completed.
* More clean up and code prettification for headers stuff
* Implement body fetch and block import
details:
Available headers are used stage blocks by combining existing headers
with newly fetched blocks. Then these blocks are imported/executed via
`persistBlocks()`.
* Logger cosmetics and cleanup
* Remove staged block queue debugging
details:
Feature still available, just not executed anymore
* Docu, logging update
* Update/simplify `runDaemon()`
* Re-calibrate block body requests and soft config for import blocks batch
why:
* For fetching, larger fetch requests are mostly truncated anyway on
MainNet.
* For executing, smaller batch sizes reduce the memory needed for the
price of longer execution times.
* Update metrics counters
* Docu update
* Some fixes, formatting updates, etc.
* Update `borrowed` type: uint -. uint64
also:
Always convert to `uint64` rather than `uint` where appropriate
2024-09-27 15:07:42 +00:00
|
|
|
# Blocks import/execution settings for running `persistBlocks()` with
|
|
|
|
|
# `nBodiesBatch` blocks in each round (minimum value is
|
|
|
|
|
# `nFetchBodiesRequest`.)
|
|
|
|
|
chain*: ChainRef
|
|
|
|
|
importRunningOk*: bool ## Advisory lock, fetch vs. import
|
|
|
|
|
nBodiesBatch*: int ## Default `nFetchBodiesBatchDefault`
|
|
|
|
|
blocksStagedQuLenMax*: int ## Default `blocksStagedQueueLenMaxDefault`
|
2024-09-09 09:12:56 +00:00
|
|
|
|
|
|
|
|
# Info stuff, no functional contribution
|
|
|
|
|
nReorg*: int ## Number of reorg invocations (info only)
|
|
|
|
|
|
|
|
|
|
# Debugging stuff
|
|
|
|
|
when enableTicker:
|
|
|
|
|
ticker*: TickerRef ## Logger ticker
|
|
|
|
|
|
|
|
|
|
FlareBuddyRef* = BuddyRef[FlareCtxData,FlareBuddyData]
|
|
|
|
|
## Extended worker peer descriptor
|
|
|
|
|
|
|
|
|
|
FlareCtxRef* = CtxRef[FlareCtxData]
|
|
|
|
|
## Extended global descriptor
|
|
|
|
|
|
|
|
|
|
# ------------------------------------------------------------------------------
|
|
|
|
|
# Public helpers
|
|
|
|
|
# ------------------------------------------------------------------------------
|
|
|
|
|
|
|
|
|
|
func lhc*(ctx: FlareCtxRef): var LinkedHChainsSync =
|
|
|
|
|
## Shortcut
|
|
|
|
|
ctx.pool.lhcSyncState
|
|
|
|
|
|
Flare sync (#2627)
* Cosmetics, small fixes, add stashed headers verifier
* Remove direct `Era1` support
why:
Era1 is indirectly supported by using the import tool before syncing.
* Clarify database persistent save function.
why:
Function relied on the last saved state block number which was wrong.
It now relies on the tx-level. If it is 0, then data are saved directly.
Otherwise the task that owns the tx will do it.
* Extracted configuration constants into separate file
* Enable single peer mode for debugging
* Fix peer losing issue in multi-mode
details:
Running concurrent download peers was previously programmed as running
a batch downloading and storing ~8k headers and then leaving the `async`
function to be restarted by a scheduler.
This was unfortunate because of occasionally occurring long waiting
times for restart.
While the time gap until restarting were typically observed a few
millisecs, there were always a few outliers which well exceed several
seconds. This seemed to let remote peers run into timeouts.
* Prefix function names `unprocXxx()` and `stagedYyy()` by `headers`
why:
There will be other `unproc` and `staged` modules.
* Remove cruft, update logging
* Fix accounting issue
details:
When staging after fetching headers from the network, there was an off
by 1 error occurring when the result was by one smaller than requested.
Also, a whole range was mis-accounted when a peer was terminating
connection immediately after responding.
* Fix slow/error header accounting when fetching
why:
Originally set for detecting slow headers in a row, the counter
was wrongly extended to general errors.
* Ban peers for a while that respond with too few headers continuously
why:
Some peers only returned one header at a time. If these peers sit on a
farm, they might collectively slow down the download process.
* Update RPC beacon header updater
why:
Old function hook has slightly changed its meaning since it was used
for snap sync. Also, the old hook is used by other functions already.
* Limit number of peers or set to single peer mode
details:
Merge several concepts, single peer mode being one of it.
* Some code clean up, fixings for removing of compiler warnings
* De-noise header fetch related sources
why:
Header download looks relatively stable, so general debugging is not
needed, anymore. This is the equivalent of removing the scaffold from
the part of the building where work has completed.
* More clean up and code prettification for headers stuff
* Implement body fetch and block import
details:
Available headers are used stage blocks by combining existing headers
with newly fetched blocks. Then these blocks are imported/executed via
`persistBlocks()`.
* Logger cosmetics and cleanup
* Remove staged block queue debugging
details:
Feature still available, just not executed anymore
* Docu, logging update
* Update/simplify `runDaemon()`
* Re-calibrate block body requests and soft config for import blocks batch
why:
* For fetching, larger fetch requests are mostly truncated anyway on
MainNet.
* For executing, smaller batch sizes reduce the memory needed for the
price of longer execution times.
* Update metrics counters
* Docu update
* Some fixes, formatting updates, etc.
* Update `borrowed` type: uint -. uint64
also:
Always convert to `uint64` rather than `uint` where appropriate
2024-09-27 15:07:42 +00:00
|
|
|
func blk*(ctx: FlareCtxRef): var BlocksImportSync =
|
|
|
|
|
## Shortcut
|
|
|
|
|
ctx.pool.blkSyncState
|
|
|
|
|
|
2024-09-09 09:12:56 +00:00
|
|
|
func layout*(ctx: FlareCtxRef): var LinkedHChainsLayout =
|
|
|
|
|
## Shortcut
|
|
|
|
|
ctx.pool.lhcSyncState.layout
|
|
|
|
|
|
|
|
|
|
func db*(ctx: FlareCtxRef): CoreDbRef =
|
|
|
|
|
## Getter
|
|
|
|
|
ctx.chain.com.db
|
|
|
|
|
|
|
|
|
|
# ------------------------------------------------------------------------------
|
|
|
|
|
# Public logging/debugging helpers
|
|
|
|
|
# ------------------------------------------------------------------------------
|
|
|
|
|
|
|
|
|
|
proc `$`*(w: BnRange): string =
|
|
|
|
|
if w.len == 1: $w.minPt else: $w.minPt & ".." & $w.maxPt
|
|
|
|
|
|
|
|
|
|
proc bnStr*(w: BlockNumber): string =
|
|
|
|
|
"#" & $w
|
|
|
|
|
|
Flare sync (#2627)
* Cosmetics, small fixes, add stashed headers verifier
* Remove direct `Era1` support
why:
Era1 is indirectly supported by using the import tool before syncing.
* Clarify database persistent save function.
why:
Function relied on the last saved state block number which was wrong.
It now relies on the tx-level. If it is 0, then data are saved directly.
Otherwise the task that owns the tx will do it.
* Extracted configuration constants into separate file
* Enable single peer mode for debugging
* Fix peer losing issue in multi-mode
details:
Running concurrent download peers was previously programmed as running
a batch downloading and storing ~8k headers and then leaving the `async`
function to be restarted by a scheduler.
This was unfortunate because of occasionally occurring long waiting
times for restart.
While the time gap until restarting were typically observed a few
millisecs, there were always a few outliers which well exceed several
seconds. This seemed to let remote peers run into timeouts.
* Prefix function names `unprocXxx()` and `stagedYyy()` by `headers`
why:
There will be other `unproc` and `staged` modules.
* Remove cruft, update logging
* Fix accounting issue
details:
When staging after fetching headers from the network, there was an off
by 1 error occurring when the result was by one smaller than requested.
Also, a whole range was mis-accounted when a peer was terminating
connection immediately after responding.
* Fix slow/error header accounting when fetching
why:
Originally set for detecting slow headers in a row, the counter
was wrongly extended to general errors.
* Ban peers for a while that respond with too few headers continuously
why:
Some peers only returned one header at a time. If these peers sit on a
farm, they might collectively slow down the download process.
* Update RPC beacon header updater
why:
Old function hook has slightly changed its meaning since it was used
for snap sync. Also, the old hook is used by other functions already.
* Limit number of peers or set to single peer mode
details:
Merge several concepts, single peer mode being one of it.
* Some code clean up, fixings for removing of compiler warnings
* De-noise header fetch related sources
why:
Header download looks relatively stable, so general debugging is not
needed, anymore. This is the equivalent of removing the scaffold from
the part of the building where work has completed.
* More clean up and code prettification for headers stuff
* Implement body fetch and block import
details:
Available headers are used stage blocks by combining existing headers
with newly fetched blocks. Then these blocks are imported/executed via
`persistBlocks()`.
* Logger cosmetics and cleanup
* Remove staged block queue debugging
details:
Feature still available, just not executed anymore
* Docu, logging update
* Update/simplify `runDaemon()`
* Re-calibrate block body requests and soft config for import blocks batch
why:
* For fetching, larger fetch requests are mostly truncated anyway on
MainNet.
* For executing, smaller batch sizes reduce the memory needed for the
price of longer execution times.
* Update metrics counters
* Docu update
* Some fixes, formatting updates, etc.
* Update `borrowed` type: uint -. uint64
also:
Always convert to `uint64` rather than `uint` where appropriate
2024-09-27 15:07:42 +00:00
|
|
|
# Source: `nimbus_import.shortLog()`
|
|
|
|
|
func toStr*(a: chronos.Duration, parts: int): string =
|
|
|
|
|
## Returns string representation of Duration ``a`` as nanoseconds value.
|
|
|
|
|
if a == nanoseconds(0):
|
|
|
|
|
return "0"
|
|
|
|
|
var
|
|
|
|
|
res = ""
|
|
|
|
|
v = a.nanoseconds()
|
|
|
|
|
parts = parts
|
|
|
|
|
|
|
|
|
|
template f(n: string, T: Duration) =
|
|
|
|
|
if v >= T.nanoseconds():
|
|
|
|
|
res.add($(uint64(v div T.nanoseconds())))
|
|
|
|
|
res.add(n)
|
|
|
|
|
v = v mod T.nanoseconds()
|
|
|
|
|
dec parts
|
|
|
|
|
if v == 0 or parts <= 0:
|
|
|
|
|
return res
|
|
|
|
|
|
|
|
|
|
f("s", Second)
|
|
|
|
|
f("ms", Millisecond)
|
|
|
|
|
f("us", Microsecond)
|
|
|
|
|
f("ns", Nanosecond)
|
|
|
|
|
|
|
|
|
|
res
|
|
|
|
|
|
2024-09-09 09:12:56 +00:00
|
|
|
# ------------------------------------------------------------------------------
|
|
|
|
|
# End
|
|
|
|
|
# ------------------------------------------------------------------------------
|