nimbus-eth1/nimbus/sync/beacon/worker/start_stop/ticker.nim

164 lines
5.0 KiB
Nim
Raw Normal View History

# Nimbus - Fetch account and storage states from peers efficiently
#
# Copyright (c) 2021-2024 Status Research & Development GmbH
# Licensed under either of
# * Apache License, version 2.0, ([LICENSE-APACHE](LICENSE-APACHE) or
# http://www.apache.org/licenses/LICENSE-2.0)
# * MIT license ([LICENSE-MIT](LICENSE-MIT) or
# http://opensource.org/licenses/MIT)
# at your option. This file may not be copied, modified, or distributed
# except according to those terms.
{.push raises: [].}
import
Flare sync (#2627) * Cosmetics, small fixes, add stashed headers verifier * Remove direct `Era1` support why: Era1 is indirectly supported by using the import tool before syncing. * Clarify database persistent save function. why: Function relied on the last saved state block number which was wrong. It now relies on the tx-level. If it is 0, then data are saved directly. Otherwise the task that owns the tx will do it. * Extracted configuration constants into separate file * Enable single peer mode for debugging * Fix peer losing issue in multi-mode details: Running concurrent download peers was previously programmed as running a batch downloading and storing ~8k headers and then leaving the `async` function to be restarted by a scheduler. This was unfortunate because of occasionally occurring long waiting times for restart. While the time gap until restarting were typically observed a few millisecs, there were always a few outliers which well exceed several seconds. This seemed to let remote peers run into timeouts. * Prefix function names `unprocXxx()` and `stagedYyy()` by `headers` why: There will be other `unproc` and `staged` modules. * Remove cruft, update logging * Fix accounting issue details: When staging after fetching headers from the network, there was an off by 1 error occurring when the result was by one smaller than requested. Also, a whole range was mis-accounted when a peer was terminating connection immediately after responding. * Fix slow/error header accounting when fetching why: Originally set for detecting slow headers in a row, the counter was wrongly extended to general errors. * Ban peers for a while that respond with too few headers continuously why: Some peers only returned one header at a time. If these peers sit on a farm, they might collectively slow down the download process. * Update RPC beacon header updater why: Old function hook has slightly changed its meaning since it was used for snap sync. Also, the old hook is used by other functions already. * Limit number of peers or set to single peer mode details: Merge several concepts, single peer mode being one of it. * Some code clean up, fixings for removing of compiler warnings * De-noise header fetch related sources why: Header download looks relatively stable, so general debugging is not needed, anymore. This is the equivalent of removing the scaffold from the part of the building where work has completed. * More clean up and code prettification for headers stuff * Implement body fetch and block import details: Available headers are used stage blocks by combining existing headers with newly fetched blocks. Then these blocks are imported/executed via `persistBlocks()`. * Logger cosmetics and cleanup * Remove staged block queue debugging details: Feature still available, just not executed anymore * Docu, logging update * Update/simplify `runDaemon()` * Re-calibrate block body requests and soft config for import blocks batch why: * For fetching, larger fetch requests are mostly truncated anyway on MainNet. * For executing, smaller batch sizes reduce the memory needed for the price of longer execution times. * Update metrics counters * Docu update * Some fixes, formatting updates, etc. * Update `borrowed` type: uint -. uint64 also: Always convert to `uint64` rather than `uint` where appropriate
2024-09-27 15:07:42 +00:00
std/strutils,
pkg/[chronos, chronicles, eth/common, stint],
../../../../utils/prettify,
../helpers
logScope:
topics = "ticker"
type
TickerStatsUpdater* = proc: TickerStats {.gcsafe, raises: [].}
## Full sync state update function
TickerStats* = object
## Full sync state (see `TickerFullStatsUpdater`)
Flare sync (#2627) * Cosmetics, small fixes, add stashed headers verifier * Remove direct `Era1` support why: Era1 is indirectly supported by using the import tool before syncing. * Clarify database persistent save function. why: Function relied on the last saved state block number which was wrong. It now relies on the tx-level. If it is 0, then data are saved directly. Otherwise the task that owns the tx will do it. * Extracted configuration constants into separate file * Enable single peer mode for debugging * Fix peer losing issue in multi-mode details: Running concurrent download peers was previously programmed as running a batch downloading and storing ~8k headers and then leaving the `async` function to be restarted by a scheduler. This was unfortunate because of occasionally occurring long waiting times for restart. While the time gap until restarting were typically observed a few millisecs, there were always a few outliers which well exceed several seconds. This seemed to let remote peers run into timeouts. * Prefix function names `unprocXxx()` and `stagedYyy()` by `headers` why: There will be other `unproc` and `staged` modules. * Remove cruft, update logging * Fix accounting issue details: When staging after fetching headers from the network, there was an off by 1 error occurring when the result was by one smaller than requested. Also, a whole range was mis-accounted when a peer was terminating connection immediately after responding. * Fix slow/error header accounting when fetching why: Originally set for detecting slow headers in a row, the counter was wrongly extended to general errors. * Ban peers for a while that respond with too few headers continuously why: Some peers only returned one header at a time. If these peers sit on a farm, they might collectively slow down the download process. * Update RPC beacon header updater why: Old function hook has slightly changed its meaning since it was used for snap sync. Also, the old hook is used by other functions already. * Limit number of peers or set to single peer mode details: Merge several concepts, single peer mode being one of it. * Some code clean up, fixings for removing of compiler warnings * De-noise header fetch related sources why: Header download looks relatively stable, so general debugging is not needed, anymore. This is the equivalent of removing the scaffold from the part of the building where work has completed. * More clean up and code prettification for headers stuff * Implement body fetch and block import details: Available headers are used stage blocks by combining existing headers with newly fetched blocks. Then these blocks are imported/executed via `persistBlocks()`. * Logger cosmetics and cleanup * Remove staged block queue debugging details: Feature still available, just not executed anymore * Docu, logging update * Update/simplify `runDaemon()` * Re-calibrate block body requests and soft config for import blocks batch why: * For fetching, larger fetch requests are mostly truncated anyway on MainNet. * For executing, smaller batch sizes reduce the memory needed for the price of longer execution times. * Update metrics counters * Docu update * Some fixes, formatting updates, etc. * Update `borrowed` type: uint -. uint64 also: Always convert to `uint64` rather than `uint` where appropriate
2024-09-27 15:07:42 +00:00
stateTop*: BlockNumber
base*: BlockNumber
least*: BlockNumber
final*: BlockNumber
beacon*: BlockNumber
Flare sync (#2627) * Cosmetics, small fixes, add stashed headers verifier * Remove direct `Era1` support why: Era1 is indirectly supported by using the import tool before syncing. * Clarify database persistent save function. why: Function relied on the last saved state block number which was wrong. It now relies on the tx-level. If it is 0, then data are saved directly. Otherwise the task that owns the tx will do it. * Extracted configuration constants into separate file * Enable single peer mode for debugging * Fix peer losing issue in multi-mode details: Running concurrent download peers was previously programmed as running a batch downloading and storing ~8k headers and then leaving the `async` function to be restarted by a scheduler. This was unfortunate because of occasionally occurring long waiting times for restart. While the time gap until restarting were typically observed a few millisecs, there were always a few outliers which well exceed several seconds. This seemed to let remote peers run into timeouts. * Prefix function names `unprocXxx()` and `stagedYyy()` by `headers` why: There will be other `unproc` and `staged` modules. * Remove cruft, update logging * Fix accounting issue details: When staging after fetching headers from the network, there was an off by 1 error occurring when the result was by one smaller than requested. Also, a whole range was mis-accounted when a peer was terminating connection immediately after responding. * Fix slow/error header accounting when fetching why: Originally set for detecting slow headers in a row, the counter was wrongly extended to general errors. * Ban peers for a while that respond with too few headers continuously why: Some peers only returned one header at a time. If these peers sit on a farm, they might collectively slow down the download process. * Update RPC beacon header updater why: Old function hook has slightly changed its meaning since it was used for snap sync. Also, the old hook is used by other functions already. * Limit number of peers or set to single peer mode details: Merge several concepts, single peer mode being one of it. * Some code clean up, fixings for removing of compiler warnings * De-noise header fetch related sources why: Header download looks relatively stable, so general debugging is not needed, anymore. This is the equivalent of removing the scaffold from the part of the building where work has completed. * More clean up and code prettification for headers stuff * Implement body fetch and block import details: Available headers are used stage blocks by combining existing headers with newly fetched blocks. Then these blocks are imported/executed via `persistBlocks()`. * Logger cosmetics and cleanup * Remove staged block queue debugging details: Feature still available, just not executed anymore * Docu, logging update * Update/simplify `runDaemon()` * Re-calibrate block body requests and soft config for import blocks batch why: * For fetching, larger fetch requests are mostly truncated anyway on MainNet. * For executing, smaller batch sizes reduce the memory needed for the price of longer execution times. * Update metrics counters * Docu update * Some fixes, formatting updates, etc. * Update `borrowed` type: uint -. uint64 also: Always convert to `uint64` rather than `uint` where appropriate
2024-09-27 15:07:42 +00:00
hdrUnprocTop*: BlockNumber
nHdrUnprocessed*: uint64
nHdrUnprocFragm*: int
nHdrStaged*: int
hdrStagedTop*: BlockNumber
blkUnprocTop*: BlockNumber
nBlkUnprocessed*: uint64
nBlkUnprocFragm*: int
nBlkStaged*: int
blkStagedBottom*: BlockNumber
reorg*: int
TickerRef* = ref object
## Ticker descriptor object
nBuddies: int
started: Moment
visited: Moment
prettyPrint: proc(t: TickerRef) {.gcsafe, raises: [].}
statsCb: TickerStatsUpdater
lastStats: TickerStats
const
tickerStartDelay = chronos.milliseconds(100)
tickerLogInterval = chronos.seconds(1)
tickerLogSuppressMax = chronos.seconds(100)
# ------------------------------------------------------------------------------
# Private functions: printing ticker messages
# ------------------------------------------------------------------------------
proc tickerLogger(t: TickerRef) {.gcsafe.} =
let
data = t.statsCb()
now = Moment.now()
if data != t.lastStats or
tickerLogSuppressMax < (now - t.visited):
let
T = data.stateTop.bnStr
B = data.base.bnStr
L = data.least.bnStr
F = data.final.bnStr
Z = data.beacon.bnStr
Flare sync (#2627) * Cosmetics, small fixes, add stashed headers verifier * Remove direct `Era1` support why: Era1 is indirectly supported by using the import tool before syncing. * Clarify database persistent save function. why: Function relied on the last saved state block number which was wrong. It now relies on the tx-level. If it is 0, then data are saved directly. Otherwise the task that owns the tx will do it. * Extracted configuration constants into separate file * Enable single peer mode for debugging * Fix peer losing issue in multi-mode details: Running concurrent download peers was previously programmed as running a batch downloading and storing ~8k headers and then leaving the `async` function to be restarted by a scheduler. This was unfortunate because of occasionally occurring long waiting times for restart. While the time gap until restarting were typically observed a few millisecs, there were always a few outliers which well exceed several seconds. This seemed to let remote peers run into timeouts. * Prefix function names `unprocXxx()` and `stagedYyy()` by `headers` why: There will be other `unproc` and `staged` modules. * Remove cruft, update logging * Fix accounting issue details: When staging after fetching headers from the network, there was an off by 1 error occurring when the result was by one smaller than requested. Also, a whole range was mis-accounted when a peer was terminating connection immediately after responding. * Fix slow/error header accounting when fetching why: Originally set for detecting slow headers in a row, the counter was wrongly extended to general errors. * Ban peers for a while that respond with too few headers continuously why: Some peers only returned one header at a time. If these peers sit on a farm, they might collectively slow down the download process. * Update RPC beacon header updater why: Old function hook has slightly changed its meaning since it was used for snap sync. Also, the old hook is used by other functions already. * Limit number of peers or set to single peer mode details: Merge several concepts, single peer mode being one of it. * Some code clean up, fixings for removing of compiler warnings * De-noise header fetch related sources why: Header download looks relatively stable, so general debugging is not needed, anymore. This is the equivalent of removing the scaffold from the part of the building where work has completed. * More clean up and code prettification for headers stuff * Implement body fetch and block import details: Available headers are used stage blocks by combining existing headers with newly fetched blocks. Then these blocks are imported/executed via `persistBlocks()`. * Logger cosmetics and cleanup * Remove staged block queue debugging details: Feature still available, just not executed anymore * Docu, logging update * Update/simplify `runDaemon()` * Re-calibrate block body requests and soft config for import blocks batch why: * For fetching, larger fetch requests are mostly truncated anyway on MainNet. * For executing, smaller batch sizes reduce the memory needed for the price of longer execution times. * Update metrics counters * Docu update * Some fixes, formatting updates, etc. * Update `borrowed` type: uint -. uint64 also: Always convert to `uint64` rather than `uint` where appropriate
2024-09-27 15:07:42 +00:00
hS = if data.nHdrStaged == 0: "n/a"
else: data.hdrStagedTop.bnStr & "(" & $data.nHdrStaged & ")"
Flare sync (#2627) * Cosmetics, small fixes, add stashed headers verifier * Remove direct `Era1` support why: Era1 is indirectly supported by using the import tool before syncing. * Clarify database persistent save function. why: Function relied on the last saved state block number which was wrong. It now relies on the tx-level. If it is 0, then data are saved directly. Otherwise the task that owns the tx will do it. * Extracted configuration constants into separate file * Enable single peer mode for debugging * Fix peer losing issue in multi-mode details: Running concurrent download peers was previously programmed as running a batch downloading and storing ~8k headers and then leaving the `async` function to be restarted by a scheduler. This was unfortunate because of occasionally occurring long waiting times for restart. While the time gap until restarting were typically observed a few millisecs, there were always a few outliers which well exceed several seconds. This seemed to let remote peers run into timeouts. * Prefix function names `unprocXxx()` and `stagedYyy()` by `headers` why: There will be other `unproc` and `staged` modules. * Remove cruft, update logging * Fix accounting issue details: When staging after fetching headers from the network, there was an off by 1 error occurring when the result was by one smaller than requested. Also, a whole range was mis-accounted when a peer was terminating connection immediately after responding. * Fix slow/error header accounting when fetching why: Originally set for detecting slow headers in a row, the counter was wrongly extended to general errors. * Ban peers for a while that respond with too few headers continuously why: Some peers only returned one header at a time. If these peers sit on a farm, they might collectively slow down the download process. * Update RPC beacon header updater why: Old function hook has slightly changed its meaning since it was used for snap sync. Also, the old hook is used by other functions already. * Limit number of peers or set to single peer mode details: Merge several concepts, single peer mode being one of it. * Some code clean up, fixings for removing of compiler warnings * De-noise header fetch related sources why: Header download looks relatively stable, so general debugging is not needed, anymore. This is the equivalent of removing the scaffold from the part of the building where work has completed. * More clean up and code prettification for headers stuff * Implement body fetch and block import details: Available headers are used stage blocks by combining existing headers with newly fetched blocks. Then these blocks are imported/executed via `persistBlocks()`. * Logger cosmetics and cleanup * Remove staged block queue debugging details: Feature still available, just not executed anymore * Docu, logging update * Update/simplify `runDaemon()` * Re-calibrate block body requests and soft config for import blocks batch why: * For fetching, larger fetch requests are mostly truncated anyway on MainNet. * For executing, smaller batch sizes reduce the memory needed for the price of longer execution times. * Update metrics counters * Docu update * Some fixes, formatting updates, etc. * Update `borrowed` type: uint -. uint64 also: Always convert to `uint64` rather than `uint` where appropriate
2024-09-27 15:07:42 +00:00
hU = if data.nHdrUnprocFragm == 0: "n/a"
else: data.hdrUnprocTop.bnStr & "(" &
Flare sync (#2627) * Cosmetics, small fixes, add stashed headers verifier * Remove direct `Era1` support why: Era1 is indirectly supported by using the import tool before syncing. * Clarify database persistent save function. why: Function relied on the last saved state block number which was wrong. It now relies on the tx-level. If it is 0, then data are saved directly. Otherwise the task that owns the tx will do it. * Extracted configuration constants into separate file * Enable single peer mode for debugging * Fix peer losing issue in multi-mode details: Running concurrent download peers was previously programmed as running a batch downloading and storing ~8k headers and then leaving the `async` function to be restarted by a scheduler. This was unfortunate because of occasionally occurring long waiting times for restart. While the time gap until restarting were typically observed a few millisecs, there were always a few outliers which well exceed several seconds. This seemed to let remote peers run into timeouts. * Prefix function names `unprocXxx()` and `stagedYyy()` by `headers` why: There will be other `unproc` and `staged` modules. * Remove cruft, update logging * Fix accounting issue details: When staging after fetching headers from the network, there was an off by 1 error occurring when the result was by one smaller than requested. Also, a whole range was mis-accounted when a peer was terminating connection immediately after responding. * Fix slow/error header accounting when fetching why: Originally set for detecting slow headers in a row, the counter was wrongly extended to general errors. * Ban peers for a while that respond with too few headers continuously why: Some peers only returned one header at a time. If these peers sit on a farm, they might collectively slow down the download process. * Update RPC beacon header updater why: Old function hook has slightly changed its meaning since it was used for snap sync. Also, the old hook is used by other functions already. * Limit number of peers or set to single peer mode details: Merge several concepts, single peer mode being one of it. * Some code clean up, fixings for removing of compiler warnings * De-noise header fetch related sources why: Header download looks relatively stable, so general debugging is not needed, anymore. This is the equivalent of removing the scaffold from the part of the building where work has completed. * More clean up and code prettification for headers stuff * Implement body fetch and block import details: Available headers are used stage blocks by combining existing headers with newly fetched blocks. Then these blocks are imported/executed via `persistBlocks()`. * Logger cosmetics and cleanup * Remove staged block queue debugging details: Feature still available, just not executed anymore * Docu, logging update * Update/simplify `runDaemon()` * Re-calibrate block body requests and soft config for import blocks batch why: * For fetching, larger fetch requests are mostly truncated anyway on MainNet. * For executing, smaller batch sizes reduce the memory needed for the price of longer execution times. * Update metrics counters * Docu update * Some fixes, formatting updates, etc. * Update `borrowed` type: uint -. uint64 also: Always convert to `uint64` rather than `uint` where appropriate
2024-09-27 15:07:42 +00:00
data.nHdrUnprocessed.toSI & "," & $data.nHdrUnprocFragm & ")"
bS = if data.nBlkStaged == 0: "n/a"
else: data.blkStagedBottom.bnStr & "(" & $data.nBlkStaged & ")"
Flare sync (#2627) * Cosmetics, small fixes, add stashed headers verifier * Remove direct `Era1` support why: Era1 is indirectly supported by using the import tool before syncing. * Clarify database persistent save function. why: Function relied on the last saved state block number which was wrong. It now relies on the tx-level. If it is 0, then data are saved directly. Otherwise the task that owns the tx will do it. * Extracted configuration constants into separate file * Enable single peer mode for debugging * Fix peer losing issue in multi-mode details: Running concurrent download peers was previously programmed as running a batch downloading and storing ~8k headers and then leaving the `async` function to be restarted by a scheduler. This was unfortunate because of occasionally occurring long waiting times for restart. While the time gap until restarting were typically observed a few millisecs, there were always a few outliers which well exceed several seconds. This seemed to let remote peers run into timeouts. * Prefix function names `unprocXxx()` and `stagedYyy()` by `headers` why: There will be other `unproc` and `staged` modules. * Remove cruft, update logging * Fix accounting issue details: When staging after fetching headers from the network, there was an off by 1 error occurring when the result was by one smaller than requested. Also, a whole range was mis-accounted when a peer was terminating connection immediately after responding. * Fix slow/error header accounting when fetching why: Originally set for detecting slow headers in a row, the counter was wrongly extended to general errors. * Ban peers for a while that respond with too few headers continuously why: Some peers only returned one header at a time. If these peers sit on a farm, they might collectively slow down the download process. * Update RPC beacon header updater why: Old function hook has slightly changed its meaning since it was used for snap sync. Also, the old hook is used by other functions already. * Limit number of peers or set to single peer mode details: Merge several concepts, single peer mode being one of it. * Some code clean up, fixings for removing of compiler warnings * De-noise header fetch related sources why: Header download looks relatively stable, so general debugging is not needed, anymore. This is the equivalent of removing the scaffold from the part of the building where work has completed. * More clean up and code prettification for headers stuff * Implement body fetch and block import details: Available headers are used stage blocks by combining existing headers with newly fetched blocks. Then these blocks are imported/executed via `persistBlocks()`. * Logger cosmetics and cleanup * Remove staged block queue debugging details: Feature still available, just not executed anymore * Docu, logging update * Update/simplify `runDaemon()` * Re-calibrate block body requests and soft config for import blocks batch why: * For fetching, larger fetch requests are mostly truncated anyway on MainNet. * For executing, smaller batch sizes reduce the memory needed for the price of longer execution times. * Update metrics counters * Docu update * Some fixes, formatting updates, etc. * Update `borrowed` type: uint -. uint64 also: Always convert to `uint64` rather than `uint` where appropriate
2024-09-27 15:07:42 +00:00
bU = if data.nBlkUnprocFragm == 0: "n/a"
else: data.blkUnprocTop.bnStr & "(" &
Flare sync (#2627) * Cosmetics, small fixes, add stashed headers verifier * Remove direct `Era1` support why: Era1 is indirectly supported by using the import tool before syncing. * Clarify database persistent save function. why: Function relied on the last saved state block number which was wrong. It now relies on the tx-level. If it is 0, then data are saved directly. Otherwise the task that owns the tx will do it. * Extracted configuration constants into separate file * Enable single peer mode for debugging * Fix peer losing issue in multi-mode details: Running concurrent download peers was previously programmed as running a batch downloading and storing ~8k headers and then leaving the `async` function to be restarted by a scheduler. This was unfortunate because of occasionally occurring long waiting times for restart. While the time gap until restarting were typically observed a few millisecs, there were always a few outliers which well exceed several seconds. This seemed to let remote peers run into timeouts. * Prefix function names `unprocXxx()` and `stagedYyy()` by `headers` why: There will be other `unproc` and `staged` modules. * Remove cruft, update logging * Fix accounting issue details: When staging after fetching headers from the network, there was an off by 1 error occurring when the result was by one smaller than requested. Also, a whole range was mis-accounted when a peer was terminating connection immediately after responding. * Fix slow/error header accounting when fetching why: Originally set for detecting slow headers in a row, the counter was wrongly extended to general errors. * Ban peers for a while that respond with too few headers continuously why: Some peers only returned one header at a time. If these peers sit on a farm, they might collectively slow down the download process. * Update RPC beacon header updater why: Old function hook has slightly changed its meaning since it was used for snap sync. Also, the old hook is used by other functions already. * Limit number of peers or set to single peer mode details: Merge several concepts, single peer mode being one of it. * Some code clean up, fixings for removing of compiler warnings * De-noise header fetch related sources why: Header download looks relatively stable, so general debugging is not needed, anymore. This is the equivalent of removing the scaffold from the part of the building where work has completed. * More clean up and code prettification for headers stuff * Implement body fetch and block import details: Available headers are used stage blocks by combining existing headers with newly fetched blocks. Then these blocks are imported/executed via `persistBlocks()`. * Logger cosmetics and cleanup * Remove staged block queue debugging details: Feature still available, just not executed anymore * Docu, logging update * Update/simplify `runDaemon()` * Re-calibrate block body requests and soft config for import blocks batch why: * For fetching, larger fetch requests are mostly truncated anyway on MainNet. * For executing, smaller batch sizes reduce the memory needed for the price of longer execution times. * Update metrics counters * Docu update * Some fixes, formatting updates, etc. * Update `borrowed` type: uint -. uint64 also: Always convert to `uint64` rather than `uint` where appropriate
2024-09-27 15:07:42 +00:00
data.nBlkUnprocessed.toSI & "," & $data.nBlkUnprocFragm & ")"
reorg = data.reorg
peers = t.nBuddies
# With `int64`, there are more than 29*10^10 years range for seconds
up = (now - t.started).seconds.uint64.toSI
mem = getTotalMem().uint.toSI
t.lastStats = data
t.visited = now
Flare sync (#2627) * Cosmetics, small fixes, add stashed headers verifier * Remove direct `Era1` support why: Era1 is indirectly supported by using the import tool before syncing. * Clarify database persistent save function. why: Function relied on the last saved state block number which was wrong. It now relies on the tx-level. If it is 0, then data are saved directly. Otherwise the task that owns the tx will do it. * Extracted configuration constants into separate file * Enable single peer mode for debugging * Fix peer losing issue in multi-mode details: Running concurrent download peers was previously programmed as running a batch downloading and storing ~8k headers and then leaving the `async` function to be restarted by a scheduler. This was unfortunate because of occasionally occurring long waiting times for restart. While the time gap until restarting were typically observed a few millisecs, there were always a few outliers which well exceed several seconds. This seemed to let remote peers run into timeouts. * Prefix function names `unprocXxx()` and `stagedYyy()` by `headers` why: There will be other `unproc` and `staged` modules. * Remove cruft, update logging * Fix accounting issue details: When staging after fetching headers from the network, there was an off by 1 error occurring when the result was by one smaller than requested. Also, a whole range was mis-accounted when a peer was terminating connection immediately after responding. * Fix slow/error header accounting when fetching why: Originally set for detecting slow headers in a row, the counter was wrongly extended to general errors. * Ban peers for a while that respond with too few headers continuously why: Some peers only returned one header at a time. If these peers sit on a farm, they might collectively slow down the download process. * Update RPC beacon header updater why: Old function hook has slightly changed its meaning since it was used for snap sync. Also, the old hook is used by other functions already. * Limit number of peers or set to single peer mode details: Merge several concepts, single peer mode being one of it. * Some code clean up, fixings for removing of compiler warnings * De-noise header fetch related sources why: Header download looks relatively stable, so general debugging is not needed, anymore. This is the equivalent of removing the scaffold from the part of the building where work has completed. * More clean up and code prettification for headers stuff * Implement body fetch and block import details: Available headers are used stage blocks by combining existing headers with newly fetched blocks. Then these blocks are imported/executed via `persistBlocks()`. * Logger cosmetics and cleanup * Remove staged block queue debugging details: Feature still available, just not executed anymore * Docu, logging update * Update/simplify `runDaemon()` * Re-calibrate block body requests and soft config for import blocks batch why: * For fetching, larger fetch requests are mostly truncated anyway on MainNet. * For executing, smaller batch sizes reduce the memory needed for the price of longer execution times. * Update metrics counters * Docu update * Some fixes, formatting updates, etc. * Update `borrowed` type: uint -. uint64 also: Always convert to `uint64` rather than `uint` where appropriate
2024-09-27 15:07:42 +00:00
info "State", up, peers, T, B, L, F, Z, hS, hU, bS, bU, reorg, mem
# ------------------------------------------------------------------------------
# Private functions: ticking log messages
# ------------------------------------------------------------------------------
proc setLogTicker(t: TickerRef; at: Moment) {.gcsafe.}
proc runLogTicker(t: TickerRef) {.gcsafe.} =
t.prettyPrint(t)
t.setLogTicker(Moment.fromNow(tickerLogInterval))
proc setLogTicker(t: TickerRef; at: Moment) =
if t.statsCb.isNil:
Flare sync (#2627) * Cosmetics, small fixes, add stashed headers verifier * Remove direct `Era1` support why: Era1 is indirectly supported by using the import tool before syncing. * Clarify database persistent save function. why: Function relied on the last saved state block number which was wrong. It now relies on the tx-level. If it is 0, then data are saved directly. Otherwise the task that owns the tx will do it. * Extracted configuration constants into separate file * Enable single peer mode for debugging * Fix peer losing issue in multi-mode details: Running concurrent download peers was previously programmed as running a batch downloading and storing ~8k headers and then leaving the `async` function to be restarted by a scheduler. This was unfortunate because of occasionally occurring long waiting times for restart. While the time gap until restarting were typically observed a few millisecs, there were always a few outliers which well exceed several seconds. This seemed to let remote peers run into timeouts. * Prefix function names `unprocXxx()` and `stagedYyy()` by `headers` why: There will be other `unproc` and `staged` modules. * Remove cruft, update logging * Fix accounting issue details: When staging after fetching headers from the network, there was an off by 1 error occurring when the result was by one smaller than requested. Also, a whole range was mis-accounted when a peer was terminating connection immediately after responding. * Fix slow/error header accounting when fetching why: Originally set for detecting slow headers in a row, the counter was wrongly extended to general errors. * Ban peers for a while that respond with too few headers continuously why: Some peers only returned one header at a time. If these peers sit on a farm, they might collectively slow down the download process. * Update RPC beacon header updater why: Old function hook has slightly changed its meaning since it was used for snap sync. Also, the old hook is used by other functions already. * Limit number of peers or set to single peer mode details: Merge several concepts, single peer mode being one of it. * Some code clean up, fixings for removing of compiler warnings * De-noise header fetch related sources why: Header download looks relatively stable, so general debugging is not needed, anymore. This is the equivalent of removing the scaffold from the part of the building where work has completed. * More clean up and code prettification for headers stuff * Implement body fetch and block import details: Available headers are used stage blocks by combining existing headers with newly fetched blocks. Then these blocks are imported/executed via `persistBlocks()`. * Logger cosmetics and cleanup * Remove staged block queue debugging details: Feature still available, just not executed anymore * Docu, logging update * Update/simplify `runDaemon()` * Re-calibrate block body requests and soft config for import blocks batch why: * For fetching, larger fetch requests are mostly truncated anyway on MainNet. * For executing, smaller batch sizes reduce the memory needed for the price of longer execution times. * Update metrics counters * Docu update * Some fixes, formatting updates, etc. * Update `borrowed` type: uint -. uint64 also: Always convert to `uint64` rather than `uint` where appropriate
2024-09-27 15:07:42 +00:00
debug "Stopped", nBuddies=t.nBuddies
else:
# Store the `runLogTicker()` in a closure to avoid some garbage collection
# memory corruption issues that might occur otherwise.
discard setTimer(at, proc(ign: pointer) = runLogTicker(t))
# ------------------------------------------------------------------------------
# Public constructor and start/stop functions
# ------------------------------------------------------------------------------
proc init*(T: type TickerRef; cb: TickerStatsUpdater): T =
## Constructor
result = TickerRef(
prettyPrint: tickerLogger,
statsCb: cb,
started: Moment.now())
result.setLogTicker Moment.fromNow(tickerStartDelay)
proc destroy*(t: TickerRef) =
## Stop ticker unconditionally
if not t.isNil:
t.statsCb = TickerStatsUpdater(nil)
# ------------------------------------------------------------------------------
# Public functions
# ------------------------------------------------------------------------------
proc startBuddy*(t: TickerRef) =
## Increment buddies counter and start ticker unless running.
if not t.isNil:
if t.nBuddies <= 0:
t.nBuddies = 1
else:
t.nBuddies.inc
Flare sync (#2627) * Cosmetics, small fixes, add stashed headers verifier * Remove direct `Era1` support why: Era1 is indirectly supported by using the import tool before syncing. * Clarify database persistent save function. why: Function relied on the last saved state block number which was wrong. It now relies on the tx-level. If it is 0, then data are saved directly. Otherwise the task that owns the tx will do it. * Extracted configuration constants into separate file * Enable single peer mode for debugging * Fix peer losing issue in multi-mode details: Running concurrent download peers was previously programmed as running a batch downloading and storing ~8k headers and then leaving the `async` function to be restarted by a scheduler. This was unfortunate because of occasionally occurring long waiting times for restart. While the time gap until restarting were typically observed a few millisecs, there were always a few outliers which well exceed several seconds. This seemed to let remote peers run into timeouts. * Prefix function names `unprocXxx()` and `stagedYyy()` by `headers` why: There will be other `unproc` and `staged` modules. * Remove cruft, update logging * Fix accounting issue details: When staging after fetching headers from the network, there was an off by 1 error occurring when the result was by one smaller than requested. Also, a whole range was mis-accounted when a peer was terminating connection immediately after responding. * Fix slow/error header accounting when fetching why: Originally set for detecting slow headers in a row, the counter was wrongly extended to general errors. * Ban peers for a while that respond with too few headers continuously why: Some peers only returned one header at a time. If these peers sit on a farm, they might collectively slow down the download process. * Update RPC beacon header updater why: Old function hook has slightly changed its meaning since it was used for snap sync. Also, the old hook is used by other functions already. * Limit number of peers or set to single peer mode details: Merge several concepts, single peer mode being one of it. * Some code clean up, fixings for removing of compiler warnings * De-noise header fetch related sources why: Header download looks relatively stable, so general debugging is not needed, anymore. This is the equivalent of removing the scaffold from the part of the building where work has completed. * More clean up and code prettification for headers stuff * Implement body fetch and block import details: Available headers are used stage blocks by combining existing headers with newly fetched blocks. Then these blocks are imported/executed via `persistBlocks()`. * Logger cosmetics and cleanup * Remove staged block queue debugging details: Feature still available, just not executed anymore * Docu, logging update * Update/simplify `runDaemon()` * Re-calibrate block body requests and soft config for import blocks batch why: * For fetching, larger fetch requests are mostly truncated anyway on MainNet. * For executing, smaller batch sizes reduce the memory needed for the price of longer execution times. * Update metrics counters * Docu update * Some fixes, formatting updates, etc. * Update `borrowed` type: uint -. uint64 also: Always convert to `uint64` rather than `uint` where appropriate
2024-09-27 15:07:42 +00:00
debug "Start buddy", nBuddies=t.nBuddies
proc stopBuddy*(t: TickerRef) =
## Decrement buddies counter and stop ticker if there are no more registered
## buddies.
if not t.isNil:
if 0 < t.nBuddies:
t.nBuddies.dec
Flare sync (#2627) * Cosmetics, small fixes, add stashed headers verifier * Remove direct `Era1` support why: Era1 is indirectly supported by using the import tool before syncing. * Clarify database persistent save function. why: Function relied on the last saved state block number which was wrong. It now relies on the tx-level. If it is 0, then data are saved directly. Otherwise the task that owns the tx will do it. * Extracted configuration constants into separate file * Enable single peer mode for debugging * Fix peer losing issue in multi-mode details: Running concurrent download peers was previously programmed as running a batch downloading and storing ~8k headers and then leaving the `async` function to be restarted by a scheduler. This was unfortunate because of occasionally occurring long waiting times for restart. While the time gap until restarting were typically observed a few millisecs, there were always a few outliers which well exceed several seconds. This seemed to let remote peers run into timeouts. * Prefix function names `unprocXxx()` and `stagedYyy()` by `headers` why: There will be other `unproc` and `staged` modules. * Remove cruft, update logging * Fix accounting issue details: When staging after fetching headers from the network, there was an off by 1 error occurring when the result was by one smaller than requested. Also, a whole range was mis-accounted when a peer was terminating connection immediately after responding. * Fix slow/error header accounting when fetching why: Originally set for detecting slow headers in a row, the counter was wrongly extended to general errors. * Ban peers for a while that respond with too few headers continuously why: Some peers only returned one header at a time. If these peers sit on a farm, they might collectively slow down the download process. * Update RPC beacon header updater why: Old function hook has slightly changed its meaning since it was used for snap sync. Also, the old hook is used by other functions already. * Limit number of peers or set to single peer mode details: Merge several concepts, single peer mode being one of it. * Some code clean up, fixings for removing of compiler warnings * De-noise header fetch related sources why: Header download looks relatively stable, so general debugging is not needed, anymore. This is the equivalent of removing the scaffold from the part of the building where work has completed. * More clean up and code prettification for headers stuff * Implement body fetch and block import details: Available headers are used stage blocks by combining existing headers with newly fetched blocks. Then these blocks are imported/executed via `persistBlocks()`. * Logger cosmetics and cleanup * Remove staged block queue debugging details: Feature still available, just not executed anymore * Docu, logging update * Update/simplify `runDaemon()` * Re-calibrate block body requests and soft config for import blocks batch why: * For fetching, larger fetch requests are mostly truncated anyway on MainNet. * For executing, smaller batch sizes reduce the memory needed for the price of longer execution times. * Update metrics counters * Docu update * Some fixes, formatting updates, etc. * Update `borrowed` type: uint -. uint64 also: Always convert to `uint64` rather than `uint` where appropriate
2024-09-27 15:07:42 +00:00
debug "Stop buddy", nBuddies=t.nBuddies
# ------------------------------------------------------------------------------
# End
# ------------------------------------------------------------------------------