* Refactor gossipsub into multiple modules
* splitup further gossipsub
* move more mesh related stuff to behavior
* fix internal tests
* fix PubSubPeer.outbound flag, make it more reliable
* use discard rather then _
* master merge
* wip
* avoid deadlocks
* tcp limits
* expose client field in chronosstream
* limit incoming connections
* update with new listen api
* fix release
* don't override peerinfo in connection
* rework transport with accept
* use semaphore to track resource ussage
* rework with new transport accept api
* move events to conn manager (#373)
* use semaphore to track resource ussage
* merge master
* expose api to acquire conn slots
* don't fail expensive metrics
* allow tracking and updating connections
* set global connection limits to 80
* add per peer connection limits
* make sure conn is closed if tracking failed
* more descriptive naming for handle
* rework with new transport accept api
* add `getStream` hide `selectConn`
* add TransportClosedError
* make nil explicit
* don't make unnecessary copies of message
* logging
* error handling
* cleanup semaphore
* track connections properly
* throw `TooManyConnections` when tracking outgoing
* use proper exception and handle conventions
* check onCloseHandle for nil
* revert internalConnect changes
* adding upgraded flag
* await stream before closing
* simplify tracking
* wip
* logging
* split connection limits into incoming and outgoing
* further streamline connection limits split counts
* don't use closeWithEOF
* move peer and conn event triggers from switch
* wip
* wip
* wip
* merge master
* handle nil connections properly
* add clarifying comment
* don't raise exc on nil
* no finally
* add proper min/max connections logic
* rebase master
* merge master
* master merge
* remove request timeout
should be addressed in separate PR
* merge master
* share semaphore when in/out limits arent enforced
* merge master
* use import
* pass semaphore to trackConn
* don't close last conn
* use storeConn
* merge master
* use storeConn
* Remove unused connections in pubsubpeer, also removed wrong usages, add a disconnect bad peers parameter
* handle exceptions in disconnectPeer
* small fix
* use the proper disconnection procedure for gossip peers
* fixes, more metrics add test about disconnection
* hot fix possible null pointers in switch
* silly isnil sugar
* Fix and test gossip directPeer connections
* add proper cancelation handling
* remove cancelled futures explicitly
* use fifo to keep proper order
* add out of order cancelations test
* make count public
* use `new` instead of `init`
* remove private `queue` from tests
* expose count as a readonly prop
* use `delete()` to preserve seq order
* salt ids in seen table
* add subscription validation callback and avoid processing topics we don't care of
* apply penalty on bad subscription
* fix IHave handling IDs
* reduce indenting, add some comments
* fix gossip randombytes generation
* do not descore unwanted topics (might happen, due to timing, needs improvements)
* cleaning up and added tests
* validate subscriptions only when subscribing
* set notice level for failed publish
* fix floodsub behavior
* adding an upgraded event to conn
* set stopped flag asap
* trigger upgradded event on conn
* set concurrency limit for accepts
* backporting semaphore from tcp-limits2
* export unittests module
* make params explicit
* tone down debug logs
* adding semaphore tests
* use semaphore to throttle concurent upgrades
* add libp2p scope
* trigger upgraded event before any other events
* add event handler for connection upgrade
* cleanup upgraded event on conn close
* make upgrades slot release rebust
* dont forget to release slot on nil connection
* misc
* make sure semaphore is always released
* minor improvements and a nil check
* removing unneeded comment
* make upgradeMonitor a non-closure proc
* make sure the `upgraded` event is initialized
* handle exceptions in accepts when stopping
* don't leak exceptions when stopping accept loops
* add more traces, remove async from rebalance
* more traces
* avoid computng scores when weight is 0.0
* debug colocation, fix an indent in unsubpeer (minor)
* add full ValidationResult coverage
* store in cache only after validation
* gossip 1.0 fixes
* fix typo
* gossip 10 internal test fixes
* test fixing
* refactor peerstats usages
* populate tables if missing when scoring
* streamline socket read/write hot path
This avoids some unnecessary memory copying on the hot path of noise /
mplex, as well as getting rid of a few futures - profiling shows that
this is one of the main culprits of small memory allocations, which
makes sense - this is where gossip fan-out happens.
* fewer futures (and corresponding closures) when sending lpchannel
messages
* avoid data copies when encrypting and framing noise messages
* avoid copying tuple when reading noise data (poor c codegen)
* fix setting eof flag in secure read
* write noise frames in one go
...and closing secure socket once is enough
* check that connection is not closed or eof
* don't release connection lock prematurely
* test that only valid connections can be added
* correct exception type on closed connection
* add clarifying comment
* use closeWithEOF for more stable test
* misc comments
* log stream id in buffestream asserts
* use closeWithEOF to prevent races in tests
* give some time to the remote handler to trigger
* adding more tests to make codecov happy
* handle resets properly with/without pushes/reads
* add clarifying comments
* pushEof should also not be concurrent
* move channel reset to bufferstream
this is where the action happens - lpchannel merely redefines how close
is done
Co-authored-by: Jacek Sieka <jacek@status.im>
* move gossip parameters to runtime
* internal test fixes
* add missing params
* restore const parameters are soldi base and use them in init
* more constants tuning
* rework transport to use the new accept api
* use the new chronos primits
* fixup tests to use the new transport api
* handle all exceptions in upgradeIncoming
* master merge
* add multiaddress exception type
* raise appropriate exception on invalida address
* allow retrying on TransportTooManyError
* adding TODO
* wip
* merge master
* add sleep if nil is returned
* accept loop handles all exceptions
* avoid issues with tray/except/finally
* make consistent with master
* cleanup accept loop
* logging
* Update libp2p/transports/tcptransport.nim
Co-authored-by: Jacek Sieka <jacek@status.im>
* use Direction enum instead of initiator flag
* use consistent import style
* remove experimental `closeWithEOF()`
Co-authored-by: Jacek Sieka <jacek@status.im>
* fix channels not being reset
silly for loop..
* allow only one concurrent read
* fix mplex test race condition
* add some bufferstream eof tests
* deadlock, lost data and hung channel fixes
* prevent concurrent `reset` calls
* reset LPChannel when read is cancelled (since data is lost)
* ensure there's one, and one only, 0-byte readOnce on EOF
* ensure that all data is returned before EOF is returned
* keep running activity monitor for half-closed channels (or they never
get closed)
* break stream tracking by type
* use closeWithEOF to await wrapped stream
* fix cancelation leaks
* fix channel leaks
* logging
* use close monitor and always call closeUnderlying
* don't use closeWithEOF
* removing close monitor
* logging
To break a potential read/write deadlock, gossipsub uses an unbounded
queue for writes - when peers are too slow to process this queue, it may
end up growing without bounds causing high memory usage.
Here, we introduce a maximum write queue length after which the peer is
disconnected - the queue is generous enough that any "normal" usage
should be fine - writes that are `await`:ed are not affected, only
writes that are launched in an `asyncSpawn` task or similar.
* avoid unnecessary copy of message when there are no send observers
* release message memory earlier in gossipsub
* simplify pubsubpeer logging
* add helper to read EOF marker after closing stream (else stream stay
alive until timeout/reset)
* don't assert on empty channel message
* don't loop when writing to chronos (no need)
When messages can't be sent to peer, we try to establish a send
connection - this causes messages to stack up as more and more unsent
messages are blocked on the dial lock.
* remove dial lock
* run reconnection loop in background task
* channel close race and deadlock fixes
* remove send lock, write chunks in one go
* push some of half-closed implementation to BufferStream
* fix some hangs where LPChannel readers and writers would not always
wake up
* simplify lazy channels
* fix close happening more than once in some orderings
* reenable connection tracking tests
* close channels first on mplex close such that consumers can read bytes
A notable difference is that BufferedStream is no longer considered EOF
until someone has actually read the EOF marker.
* docs, simplification
* add peer lifecycle events
* rework peer events to not use connection events
* don't use result in pubsub and switch init
* wip
* use ordered hashes and remove logscope
* logging
* add missing test
* small fixes
* remove almost-empty types module
* lock when writing message (that's the only place the lock matters, and
only when the message is > max msg size)
* logging updates (log in consistent order, makes reading logs easier)
* raise EOF from readExactly only if no bytes have been read (to signal
that _no_ bytes were lost)
This change modifies how the backpressure algorithm in bufferstream
works - in particular, instead of working byte-by-byte, it will now work
seq-by-seq.
When data arrives, it usually does so in packets - in the current
bufferstream, the packet is read then split into bytes which are fed one
by one to the bufferstream. On the reading side, the bytes are popped of
the bufferstream, again byte by byte, to satisfy `readOnce` requests -
this introduces a lot of synchronization traffic because the checks for
full buffer and for async event handling must be done for every byte.
In this PR, a queue of length 1 is used instead - this means there will
at most exist one "packet" in `pushTo`, one in the queue and one in the
slush buffer that is used to store incomplete reads.
* avoid byte-by-byte copy to buffer, with synchronization in-between
* reuse AsyncQueue synchronization logic instead of rolling own
* avoid writeHandler callback - implement `write` method instead
* simplify EOF signalling by only setting EOF flag in queue reader (and
reset)
* remove BufferStream pipes (unused)
* fixes drainBuffer deadlock when drain is called from within read loop
and thus blocks draining
* fix lpchannel init order
if the connection is already closed (because the remote closes during
identfiy for example), an exception would be raised which would leave
the connection in limbo, beacuse it would not go through the rest of
internalConnect.
Also, if the connection is already closed, the disconnect event would be
scheduled before the connect event :/
* mcache fixes
* remove timed cache - the window shifting already removes old messages
* ref -> object
* avoid unnecessary allocations with `[]` operator
* simplify init
* fix several gossipsub/floodsub issues
* floodsub, gossipsub: don't rebroadcast messages that fail validation
(!)
* floodsub, gossipsub: don't crash when unsubscribing from unknown
topics (!)
* gossipsub: don't send message to peers that are not interested in the
topic, when messages don't share topic list
* floodsub: don't repeat all messages for each message when
rebroadcasting
* floodsub: allow sending empty data
* floodsub: fix inefficient unsubscribe
* sync floodsub/gossipsub logging
* gossipsub: include incoming messages in mcache (!)
* gossipsub: don't rebroadcast already-seen messages (!)
* pubsubpeer: remove incoming/outgoing seen caches - these are already
handled in gossipsub, floodsub and will cause trouble when peers try to
resubscribe / regraft topics (because control messages will have same
digest)
* timedcache: reimplement without timers (fixes timer leaks and extreme
inefficiency due to per-message closures, futures etc)
* timedcache: ref -> obj
when identify is run on incoming connections, the connmanager tables are
updated too late for incoming connections to properly be handled
this is a quickfix that will eventually need cleaning up
* remove send lock
When mplex receives data it will block until a reader has processed the
data. Thus, when a large message is received, such as a gossipsub
subscription table, all of mplex will be blocked until all reading is
finished.
However, if at the same time a `dial` to establish a gossipsub send
connection is ongoing, that `dial` will be blocked because mplex is no
longer reading data - specifically, it might indeed be the connection
that's processing the previous data that is waiting for a send
connection.
There are other problems with the current code:
* If an exception is raised, it is not necessarily raised for the same
connection as `p.sendConn`, so resetting `p.sendConn` in the exception
handling is wrong
* `p.isConnected` is checked before taking the lock - thus, if it
returns false, a new dial will be started. If a new task enters `send`
before dial is finished, it will also determine `p.isConnected` is
false, then get stuck on the lock - when the previous task finishes and
releases the lock, the new task will _also_ dial and thus reset
`p.sendConn` causing a leak.
* prefer existing connection
simplifies flow
* move pubsub of off switch, pass switch into pubsub
* use join on lpstreams
* properly cleanup up failed peers
* fix tests
* fix peertable hasPeerId
* fix tests
* rework sending, remove helpers from pubsubpeer, unify in broadcast
* further split broadcast into send
* use send where appropriate
* use formatIt
* improve trace
Co-authored-by: Giovanni Petrantoni <giovanni@fragcolor.xyz>
* peer hooks -> events
* peerinfo -> peerid
* include connection direction in event
* check connection status after event
* lock connmanager lookup also when dialling peer
* clean up un-upgraded connection when upgrade fails
* await peer eventing
* remove join/lifetime future from peerinfo
Peerinfo instances are not unique per peer so the lifetime future is
misleading - it fires when a random connection is closed, not the "last"
one
* document switch values
* naming
* peerevent->conneevent
Every Chronicles log record has an existing `msg` property matching
the static string supplied in the log statement. Thus, it's currently
not possible to use `msg` as the name of a user property:
https://github.com/status-im/nim-chronicles/issues/86
* prefer PeerID in switch api
This avoids ref issues like ref identity and nil
* use existing peerinfo instance if possible
* remove secureCodec
there may be multiple connections per peerinfo with different codecs
* avoid some extra async::
* add finegrained timeouts to pubsub
* use 10 millis timeout in tests
* finalization
* revert timeouts
* use `atEof` for reads
* adjust timeouts and use atEof for reads
* use atEof for reads
* set isEof flag
* no backoff for pubsub streams
* temp timer increase, make macos finalize
* don't call `subscribePeer` in libp2p anymore
* more traces
* leak tests
* lower timeouts
* handle exceptions in control message
* don't use `cancelAndWait`
* handle exceptions in helpers
* wip
* don't send empty messages
* check for leaks properly
* don't use cancelAndWait
* don't await subscribption sends
* remove subscrivePeer calls from switch
* trying without the hooks again
* resolve several races in connmanager
collections may change while doing await
* close conn
* simplify connmanager API
PeerID avoids nil and ref issues
* remove silly condition
* Don't ignore missing \n in multistream requests
Also make sure to except and quit an existing connection if multistream handshake fails
* solve handshake tracking in ms handler
* Initial commit.
* Workaround nim's bug and add some other compilation error fixes.
* Rename to libp2p_pki_schemes.
Fix secio.
Add tests.
* Attempt to fix command line.
* Fix command line.
Show status in tests.
* add support for channel timeouts
* tests for channel timeout
* add timeouts to standard switch
* fix mplex init
* cleanup timer on stream close
* add comment for `isConnected`
* move cleanup event
* Fix security issue #266.
* Add more tests.
* Fix PeerID tests should not use RSA-512 keys.
* Fix crypto tests to use vectors with 2048+ bits.
* Disable 4096bit RSA key generation for CI debug runs.
* Fix gossip messages seqno according to spec
* Add peers back to gossipsub table, slow down heartbeat
* Revert "Add peers back to gossipsub table, slow down heartbeat"
This reverts commit 01e2e62172.
* make seqno a threadvar, remove from peerinfo
* seqno refactor, into pubsub
* Minprotobuf initial commit
* Fix noise.
* Add signed integers support.
Add checks for field number value.
Remove some casts.
* Fix compile errors.
* Fix comments and constants.
* more cleanup
* fix tests
* merging master
* remove `withLock` as it conflicts with stdlib
* wip
* more fanout ttl
Co-authored-by: Giovanni Petrantoni <giovanni@fragcolor.xyz>
* gossipsub is a function of subscription messages only
* graft/prune work with mesh, get filled up from gossipsub
* fix race conditions with await
* fix exception unsafety when grafting/pruning
* fix allowing up to DHi peers in mesh on incoming graft
* fix metrics in several places
* reuse single RNG instance for all crypto key generation
* use foolproof rng
* initRng -> newRng (because it's ref)
* fix test
* imports/exports, chat fix
* fix rsa
* imports and exports
* work around threadvar issue
* fixup
* mac workaround test
* Peer resultification and defect only
* Fixing some tests
* test fixes
* Rename peer into peerid
* better result error message in identify
* further merge fixes
* don't send public key in message when not signing (information leak)
* don't run rebalance if there are peers in gossip (see #242)
* don't crash randomly on bad peer id from remote
Giovanni Petrantoni
Dmitriy Ryajov
Giovanni Petrantoni
Jacek Sieka
Mamy Ratsimbazafy
Giovanni Petrantoni
cheatfate
Dean Eigenmann
Oskar Thorén
Zahary Karadjov
Ștefan Talpalaru