Commit Graph

198 Commits

Author SHA1 Message Date
Dmitriy Ryajov 034a1e8b1b
small cleanups from tcp-limits2 (#446) 2020-11-23 15:02:23 -06:00
Dmitriy Ryajov 1d16d22f5f
Don't allow concurrent pushdata (#444)
* handle resets properly with/without pushes/reads

* add clarifying comments

* pushEof should also not be concurrent

* move channel reset to bufferstream

this is where the action happens - lpchannel merely redefines how close
is done

Co-authored-by: Jacek Sieka <jacek@status.im>
2020-11-23 09:07:11 -06:00
Jacek Sieka 74acd0a33a
fix channels not being reset (#439)
* fix channels not being reset

silly for loop..

* allow only one concurrent read
* fix mplex test race condition
* add some bufferstream eof tests

* deadlock, lost data and hung channel fixes

* prevent concurrent `reset` calls
* reset LPChannel when read is cancelled (since data is lost)
* ensure there's one, and one only, 0-byte readOnce on EOF
* ensure that all data is returned before EOF is returned
* keep running activity monitor for half-closed channels (or they never
get closed)
2020-11-17 08:59:25 -06:00
Dmitriy Ryajov 4fb3f50d2c
Reset channels on close (#425)
* reset when failed to read/write muxed conn

* add more comprehensive resource cleanup tests

* style

* cleanup tests
2020-11-06 09:24:24 -06:00
Dmitriy Ryajov 3956f3fd69
make sure all streams are tracked (#422)
* make sure all streams are tracked

* revert unnecesary change
2020-11-04 21:52:54 -06:00
Jacek Sieka 03639f1446
Revert "Channel leaks (#413)" (#417)
This reverts commit 1de1d49223.
2020-11-01 14:49:25 -06:00
Dmitriy Ryajov 1de1d49223
Channel leaks (#413)
* break stream tracking by type

* use closeWithEOF to await wrapped stream

* fix cancelation leaks

* fix channel leaks

* logging

* use close monitor and always call closeUnderlying

* don't use closeWithEOF

* removing close monitor

* logging
2020-10-27 11:21:03 -06:00
Jacek Sieka 17e00e642a
limit write queue length (#376)
To break a potential read/write deadlock, gossipsub uses an unbounded
queue for writes - when peers are too slow to process this queue, it may
end up growing without bounds causing high memory usage.

Here, we introduce a maximum write queue length after which the peer is
disconnected - the queue is generous enough that any "normal" usage
should be fine - writes that are `await`:ed are not affected, only
writes that are launched in an `asyncSpawn` task or similar.

* avoid unnecessary copy of message when there are no send observers
* release message memory earlier in gossipsub
* simplify pubsubpeer logging
2020-09-24 18:43:20 +02:00
Jacek Sieka 25bd0a18f4
small fixes (#374)
* add helper to read EOF marker after closing stream (else stream stay
alive until timeout/reset)
* don't assert on empty channel message
* don't loop when writing to chronos (no need)
2020-09-24 07:30:19 +02:00
Jacek Sieka 49a12e619d
channel close race and deadlock fixes (#368)
* channel close race and deadlock fixes

* remove send lock, write chunks in one go
* push some of half-closed implementation to BufferStream
* fix some hangs where LPChannel readers and writers would not always
wake up
* simplify lazy channels
* fix close happening more than once in some orderings
* reenable connection tracking tests
* close channels first on mplex close such that consumers can read bytes

A notable difference is that BufferedStream is no longer considered EOF
until someone has actually read the EOF marker.

* docs, simplification
2020-09-21 19:48:19 +02:00
Giovanni Petrantoni b99d2039a8
Gossip one one (#240)
* allow multiple codecs per protocol (without breaking things)

* add 1.1 protocol to gossip

* explicit peering part 1

* explicit peering part 2

* explicit peering part 3

* PeerInfo and ControlPrune protocols

* fix encodePrune

* validated always, even explicit peers

* prune by score (score is stub still)

* add a way to pass parameters to gossip

* standard setup fixes

* take into account explicit direct peers in publish

* add floodPublish logic

* small fixes, publish still half broken

* make sure to waitsub in sparse test

* use var semantics to optimize table access

* wip... lvalues don't work properly sadly...

* big publish refactor, replenish and balance

* fix internal tests

* use g.peers for fanout (todo: don't include flood peers)

* exclude non gossip from fanout

* internal test fixes

* fix flood tests

* fix test's trypublish

* test interop fixes

* make sure to not remove peers from gossip table

* restore old replenishFanout

* cleanups

* restore utility module import

* restore trace vs debug in gossip

* improve fanout replenish behavior further

* triage publish nil peers (issue is on master too but just hidden behind a if/in)

* getGossipPeers fixes

* remove topics from pubsubpeer (was unused)

* simplify rebalanceMesh (following spec) and make it finally reach D_high

* better diagnostics

* merge new pubsubpeer, copy 1.1 to new module

* fix up merge

* conditional enable gossip11 module

* add back topics in peers, re-enable flood publish

* add more heartbeat locking to prevent races

* actually lock the heartbeat

* minor fixes

* with sugar

* merge 1.0

* remove assertion in publish

* fix multistream 1.1 multi proto

* Fix merge oops

* wip

* fix gossip 11 upstream

* gossipsub11 -> gossipsub

* support interop testing

* tests fixing

* fix directchat build

* control prune updates (pb)

* wip parameters

* gossip internal tests fixes

* parameters wip

* finishup with params

* cleanups/wip

* small sugar

* grafted and pruned procs

* wip updateScores

* wip

* fix logging issue

* pubsubpeer, chronicles explicit override

* fix internal gossip tests

* wip

* tables troubleshooting

* score wip

* score wip

* fixes

* fix test utils generateNodes

* don't delete while iterating in score update

* fix grafted defect

* add a handleConnect in subscribeTopic

* pruning improvements

* wip

* score fixes

* post merge - builds gossip tests

* further merge fixes

* rebalance improvements and opportunistic grafting

* fix test for now

* restore explicit peering

* implement peer exchange graft message

* add an hard cap to PX

* backoff time management

* IWANT cap/budget

* Adaptive gossip dissemination

* outbound mesh quota, internal tests fixing

* oversub prune score based, finish outbound quota

* finishup with score and ihave budget

* use go daemon 0.3.0

* import fixes

* byScore cleanup score sorting

* remove pointless scaling in `/` Duration operator

* revert using libp2p org for daemon

* interop fixes

* fixes and cleanup

* remove heartbeat assertion, minor debug fixes

* logging improvements and cleaning up

* (to revert) add some traces

* add explicit topic to gossip rpcs

* pubsub merge fixes and type fix in switch

* Revert "(to revert) add some traces"

This reverts commit 4663eaab6c.

* cleanup some now irrelevant todo

* shuffle peers anyway as score might be disabled

* add missing shuffle

* old merge fix

* more merge fixes

* debug improvements

* re-enable gossip internal tests

* add gossip10 fallback (dormant but tested)

* split gossipsub internal tests into 1.0 and 1.1

Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
2020-09-21 11:16:29 +02:00
Jacek Sieka 0db45462cd
mplex fixes (#362)
* remove almost-empty types module
* lock when writing message (that's the only place the lock matters, and
only when the message is > max msg size)
* logging updates (log in consistent order, makes reading logs easier)
* raise EOF from readExactly only if no bytes have been read (to signal
that _no_ bytes were lost)
2020-09-14 10:19:54 +02:00
Jacek Sieka 96d4c44fec
refactor bufferstream to use a queue (#346)
This change modifies how the backpressure algorithm in bufferstream
works - in particular, instead of working byte-by-byte, it will now work
seq-by-seq.

When data arrives, it usually does so in packets - in the current
bufferstream, the packet is read then split into bytes which are fed one
by one to the bufferstream. On the reading side, the bytes are popped of
the bufferstream, again byte by byte, to satisfy `readOnce` requests -
this introduces a lot of synchronization traffic because the checks for
full buffer and for async event handling must be done for every byte.

In this PR, a queue of length 1 is used instead - this means there will
at most exist one "packet" in `pushTo`, one in the queue and one in the
slush buffer that is used to store incomplete reads.

* avoid byte-by-byte copy to buffer, with synchronization in-between
* reuse AsyncQueue synchronization logic instead of rolling own
* avoid writeHandler callback - implement `write` method instead
* simplify EOF signalling by only setting EOF flag in queue reader (and
reset)
* remove BufferStream pipes (unused)
* fixes drainBuffer deadlock when drain is called from within read loop
and thus blocks draining
* fix lpchannel init order
2020-09-10 08:19:13 +02:00
Jacek Sieka 5b347adf58
logging fixes and small cleanups (#361)
In particular, allow longer multistream select reads
2020-09-09 19:12:08 +02:00
Jacek Sieka 82c179db9e
mplex fixes (#356)
* close the right connection when channel send fails
* don't crash on channel id that is not unique
2020-09-08 08:24:28 +02:00
Jacek Sieka c1856fda53
simplify and unify logging (#353)
* use short format for logging peerid
* log peerid:oid for connections
2020-09-06 10:31:47 +02:00
Eugene Kabanov 0b85192119
Remove asyncCheck from codebase. (#345)
* Remove asyncCheck from codebase.

* Replace all `discard` statements with new `asyncSpawn`.

* Bump `nim-chronos` requirement.
2020-09-04 18:30:45 +02:00
Jacek Sieka 397f9edfd4
simplify mplex (#327)
* less async
* less copying of data
* less redundant cleanup
2020-08-15 07:58:30 +02:00
Dmitriy Ryajov b76b3e0e9b
Rework pubsub (#322)
* move pubsub of off switch, pass switch into pubsub

* use join on lpstreams

* properly cleanup up failed peers

* fix tests

* fix peertable hasPeerId

* fix tests

* rework sending, remove helpers from pubsubpeer, unify in broadcast

* further split broadcast into send

* use send where appropriate

* use formatIt

* improve trace

Co-authored-by: Giovanni Petrantoni <giovanni@fragcolor.xyz>
2020-08-11 18:05:49 -06:00
Dmitriy Ryajov 2325692f55
Fix half closed (#324)
* don't call `close` in `remoteClose`

* make sure timeout are properly propagted

* fix tests

* adding remote close write test
2020-08-10 16:17:11 -06:00
Giovanni Petrantoni 5c986cf657
Fix build, add some raises (#315)
* Fix build, add some raises

* wip

* wip more raises

* missing exc object in mplex

* proper lifetime for subscribePeer

Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
2020-08-05 19:30:57 -06:00
Dmitriy Ryajov 74a6dccd80
adding channel limits to mplex (#309) 2020-08-04 23:16:04 -06:00
Ștefan Talpalaru 843d32f8db
put expensive metrics under a Nim define (#310) 2020-08-04 17:27:59 -06:00
Dmitriy Ryajov cf2b42b914
Moving idle timeout to Connection to enable across all connection streams (#307)
* move idle timeout logic to connection

* more informative logs

* more informative logs
2020-08-04 07:22:05 -06:00
Dmitriy Ryajov 980764774e
pubsub timeouts tuning (#295)
* add finegrained timeouts to pubsub

* use 10 millis timeout in tests

* finalization

* revert timeouts

* use `atEof` for reads

* adjust timeouts and use atEof for reads

* use atEof for reads

* set isEof flag

* no backoff for pubsub streams

* temp timer increase, make macos finalize

* don't call `subscribePeer` in libp2p anymore

* more traces

* leak tests

* lower timeouts

* handle exceptions in control message

* don't use `cancelAndWait`

* handle exceptions in helpers

* wip

* don't send empty messages

* check for leaks properly

* don't use cancelAndWait

* don't await subscribption sends

* remove subscrivePeer calls from switch

* trying without the hooks again
2020-08-02 23:20:11 -06:00
Jacek Sieka e655a510cd
misc cleanups (#303) 2020-08-02 12:22:49 +02:00
Dmitriy Ryajov f7fdf31365
Pubsub lifetime (#284)
* lifecycle hooks

* tests

* move trace after closed check

* restore 1 second heartbeat

* await close event

* fix tests

* print direction string

* more trace logging

* add pubsub monitor

* add log scope

* adjust idle timeout

* add exc.msg to trace
2020-07-27 13:33:51 -06:00
Giovanni Petrantoni c3404f6eea
Handle cancellation in timeoutMonitor (#283)
* Handle cancellation in timeoutMonitor

* refactor lpchannel timeout as suggested by cheatfate
2020-07-21 09:03:41 -06:00
Dmitriy Ryajov 38eb36efae
don't use close event to stop timer (#280) 2020-07-18 11:00:44 -06:00
Dmitriy Ryajov ba071cafa6
Channel timeout (#278)
* add support for channel timeouts

* tests for channel timeout

* add timeouts to standard switch

* fix mplex init

* cleanup timer on stream close

* add comment for `isConnected`

* move cleanup event
2020-07-17 12:44:41 -06:00
Ștefan Talpalaru b8b0a2b4bc
CI: build binaries with TRACE & JSON logs (#268)
Also: remove unused imports.
2020-07-14 02:02:16 +02:00
Dmitriy Ryajov 181cf73ca7
Drain buffer (#264)
* drain lpchannel on reset

* move drainBuffer to bufferstream
2020-07-12 18:37:10 +02:00
Dmitriy Ryajov c788a6a3c0
Cleanup resources (#246)
* consolidate reading in lpstream

* remove debug echo

* tune log level

* add channel cleanup and cancelation handling

* cancelation handling

* cancelation handling

* cancelation handling

* cancelation handling

* cleanup and cancelation handling

* cancelation handling

* cancelation

* tests

* rename isConnected to connected

* remove testing trace

* comment out debug stacktraces

* explicit raises
2020-06-29 09:15:31 -06:00
Dmitriy Ryajov 902880ef1f
consolidate reading in lpstream (#241)
* consolidate reading in lpstream

* remove debug echo

* throw if not enough bytes where read

* tune log level

* set eof flag

* test readExactly to fail on not enough bytes
2020-06-27 11:33:34 -06:00
Dmitriy Ryajov 7a95f1844b
Concurrent dials (#238)
* count published messages

* don't call `switch.dial` in `subscribeToPeer`

* add secureconn constructor

* close in the correct order

* concurent dial lock and track in/out conns better

* make tests pass

* add todo comment

* disconect peers that open too many connections

* wip

* do connection and muxer tracking in one place

* prevent nil pointer in observers

* drop connections when peers is over max

* prevent channel leaks

* don't use closure to handle channel
2020-06-24 09:08:44 -06:00
Jacek Sieka b99fd88deb
logging fixes 2020-06-21 11:14:19 +02:00
Giovanni Petrantoni 7852c6dd0f
Noise and eth2/nbc fixes (#226)
* Remove noise padding payload (spec removed it)

* add log scope in secure

* avoid defect array out of range in switch secure when "na"

* improve identify traces

* wip noise fixes

* noise protobuf adjustments (trying)

* add more debugging messages/traces, improve their actual contents

* re-enable ID check in noise

* bump go daemon tag version

* bump go daemon tag version

* enable noise in daemonapi

* interop testing, (both secio and noise will be tested)

* azure cache bump (p2pd)

* CI changes

- Travis: use Go 1.14
- azure-pipelines.yml: big cleanup
- Azure: bump cache keys
- build 64-bit p2pd on 32-bit Windows
- install both Mingw-w64 architectures

* noise logging fixes

* alternate testing between noise and secio

* increase timeout to avoid VM errors in CI (multistream tests)

* refactor heartbeat management in gossipsub

* remove locking within heartbeat

* refactor heartbeat management in gossipsub

* remove locking within heartbeat

Co-authored-by: Ștefan Talpalaru <stefantalpalaru@yahoo.com>
2020-06-20 19:56:55 +09:00
Dmitriy Ryajov 5b28e8c488
Cleanup lpstream, Connection and BufferStream (#228)
* count published messages

* don't call `switch.dial` in `subscribeToPeer`

* don't use delegation in connection

* move connection out to own file

* don't breakout on reset

* make sure to call close on secured conn

* add lpstream tracing

* don't breackdown by conn id

* fix import

* remove unused lable

* reset  connection on exception

* add additional metrics for skipped messages

* check for nil in secure.close
2020-06-19 11:29:43 -06:00
Dmitriy Ryajov 3c4c10d871
con't crash on nil ptr 2020-06-15 13:37:25 -06:00
Dmitriy Ryajov 7cb6c81159
Don't modify iterables while iterating them (#219)
* don't modify iterables while iterating

* assert handlers to properly close connections
2020-06-15 12:30:09 -06:00
Dmitriy Ryajov 9cd47fe816
add a logScope to make tracing less ugly (#218)
* add a logScope to make tracing less ugly

* don't crash on nil pointer
2020-06-15 12:10:41 -06:00
Dmitriy Ryajov 85b56d0b3a
Observedaddr (#217)
* send correct observerAddr

* run tests with info log level

* set observedaddr for channels
2020-06-12 19:56:17 -06:00
Dmitriy Ryajov 6b196ad7b4
remove pubsub peer on disconnect (#212)
* remove pubsub peer on disconnect

* make sure lock is aquired

* add $

* count upgrades/dials/disconnects
2020-06-11 08:45:59 -06:00
Viktor Kirilov 1afec627c2
proper name for topics so that we can filter dynamically using chronicles (#210)
* proper name for topics so that we can filter dynamically using chronicles

* lowercase
2020-06-10 10:48:01 +02:00
Dmitriy Ryajov 5960d42c50
remove casts from (#203) 2020-06-02 20:21:11 -06:00
Dmitriy Ryajov 285884c20c
Close peers (#201)
* wip

* exceptions and resource cleanup

* correct peerlifetime on disconnect

* emulate defered

* remove comment
2020-06-02 11:32:42 -06:00
Dmitriy Ryajov c7298f34f4 additional comments 2020-06-02 09:10:27 -06:00
Dmitriy Ryajov 1b4876d26d emulate `defered` 2020-06-02 09:10:27 -06:00
Dmitriy Ryajov 4df151a3a3 typos 2020-06-02 09:10:27 -06:00
Dmitriy Ryajov 27a7f8c948 move EOF flag after local close and comments 2020-06-02 09:10:27 -06:00
Dmitriy Ryajov 815282a5da remove all() 2020-06-02 09:10:27 -06:00
Dmitriy Ryajov abc12d0fb5 move stram close to a better location 2020-06-02 09:10:27 -06:00
Dmitriy Ryajov d83ce4c932 exceptions and resource cleanup 2020-06-02 09:10:27 -06:00
Dmitriy Ryajov 46daed9a38 wip 2020-06-02 09:10:27 -06:00
Dmitriy Ryajov 62da2a05c3 wip: rework with proper half-closed 2020-06-02 09:10:27 -06:00
Giovanni Petrantoni 7c9e5c2f7a "Could not write to connection" message split between trace and debug due to log size 2020-05-30 23:47:56 +09:00
Dmitriy Ryajov 7900fd9f61
Half closed (#174)
* call write until all is written out

* add comments to lpchannel fields

* add an eof flag to signal which end closed

* wip: rework with proper half-closed

* add eof and closed handling

* propagate closes to piped

* call parent close

* moving bufferstream trackers out

* move writeLock to bufferstream

* move writeLock out

* remove unused call

* wip

* rebasing master

* fix mplex tests

* wip

* fix bufferstream after backport

* wip

* rename to differentiate from chronos tracker

* close connection on chronos close

* make reset request asyncCheck

* fix channel cleanup

* misc

* don't use read

* fix backports

* make noise work again

* proper exception handling

* don't reraise just yet

* add convenience templates

* dont double wrap

* use async pragma

* fixes after backporting

* muxer owns connection

* remove on transport close cleanup

* revert back allread

* adding some todos

* read from stream

* inc count before closing

* rebasing master

* rebase master

* use correct exception type

* use try/finally insted of defer

* fix compile in trace mode

* reset channels on mplex close
2020-05-19 18:14:15 -06:00
Dmitriy Ryajov 681991ae48
reduce buffer size in lpchannel (#184) 2020-05-19 16:15:36 -06:00
Dmitriy Ryajov 1819502fb5
Cleanup - tests and logging (#178)
* make async for proper exception handling

* tryAndWarn msg messes up Exception msg

* misc: comment out tracker dumps

* cleanup mplex tests

* more informative errors

* give CI time to run

* revert change, bacause it causes races
2020-05-18 07:49:49 -06:00
Jacek Sieka 69abf5097d
handle a few exceptions (#170)
* handle a few exceptions

Some of these are maybe too aggressive, but in return, they'll log
their exception - more refactoring needed to sort this out - right now
we get crashes on unhandled exceptions of unknown origin

* during connection setup
* while closing channels
* while processing pubsubs

* catch exceptions that are raised and don't try to catch exceptions that are not raised

* propagate cancellederror

* one more

* more

* more

* make interop tests less fragile

* Raise expiration time in gossipsub fanout test for slow CI

Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
Co-authored-by: Giovanni Petrantoni <giovanni@fragcolor.xyz>
2020-05-14 21:56:56 -06:00
Giovanni Petrantoni 005e088405
Properly track and close mplex handlers (#166)
* Properly track and close mplex handlers

* Avoid verbose warnings

* Fix tryAndWarn trace issue

* Handle LPEOF in lpchannel close
2020-05-12 14:45:32 +02:00
Jacek Sieka 3053f03814 fix varint issues
* fixes #111
2020-05-11 09:12:23 -06:00
Jacek Sieka fbf640794b
move channel size constant 2020-05-09 08:48:26 +02:00
Jacek Sieka 1efada474c
remove readLoop in secure protocols (#162)
* remove readLoop in secure protocols, fix security issues

* fix Defect on remote sending 0-byte noise/secio message
* remove msglen from `write` (unused)
* simplify SecureConn data flow
* document some control-flow issues

* unify exception behaviour across noise and secio

* secio would not raise on mac/decryption errors

* fix compile error
2020-05-07 14:37:46 -06:00
Jacek Sieka 330da51819
removals (#159)
* remove unused stream methods
* reimplement some of them with proc's
* remove broken tests
* Error->Defect for defect
* warning fixes
2020-05-06 18:31:47 +02:00
Giovanni Petrantoni 4c6a123d31
Add chronos trackers and used them to sanitize resource disposal (#131)
* Add chronos trackers and used them to sanitize resource disposal

* Chronos trackers for transport tests wip

* No more chronos leaks in testtransport

* Make tcp transport and test more robust when closing

* Test async leaking tracking wip

* Fix a regression in wire connect

* Add chronos trackers to more tests and sanitize resource closure

* Wip fixing floodsub tests

* Floodsub wip

* Made floodsub basically deterministic, hit a nim bug with captures tho

* Wrap up floodsub tests refactor

* Wrapping up

* Add allFuturesThrowing utility

* Fix missing allFuturesThrowing in noise tests!

* Make tests green

* attempt fixing gossipsub failing cases

* Make sure to check also fanout in waitSub

* More verbose traces

* Gossipsub test improvments

* Refactor TcpTransport remove asyncCheck

* Add Connection trackers

* Add stricter connection tracking, wip mplex fix

* More asynccheck removal, in order to avoid connection leaks

* bump chronicles requirement

* Enable tracker dump to check CI output

* Wait for more futures in testmplex

* Remove tracker dump messages

* add tryAndWarn utility, fix mplex issue with go interop

* All allFuturesThrowing to directchat too

* make sure to cleanup on transport close
2020-04-21 10:24:42 +09:00
Giovanni Petrantoni 303ec297da
Start removing allFutures (#125)
* Start removing allFutures

* More allfutures removal

* Complete allFutures removal except legacy and tests

* Introduce table values copies to prevent error

* Switch to allFinished

* Resolve TODOs in flood/gossip

* muxer handler, log and re-raise

* Add a common and flexible way to check multiple futures
2020-04-11 13:08:25 +09:00
Dmitriy Ryajov 6cbcc7859e reduse usssage of asyncCheck 2020-04-07 12:16:59 -06:00
Dmitriy Ryajov 8dda6c289d more connection closes to fix leaks 2020-04-07 12:16:59 -06:00
Giovanni Petrantoni e39bf0a4cf
Mplex: Add the ability to send any size payload (#123)
* Mplex: Add the ability to send any size payload

* Ensure size of coder header
2020-04-03 17:26:46 +02:00
Dmitriy Ryajov 5285f0d091
Fix/misc (#116)
* only check for payload size

* only subscribe if connection succeeded

* fix failing test

* check that the strem is active before openning

* msg type should not be > than 0x7

* fix tests

* check max against enum val
2020-03-29 08:28:48 -06:00
Dmitriy Ryajov 3effb95f10 close underlying bufferstream in lpchannel 2020-03-28 09:29:43 -06:00
Dmitriy Ryajov 4199508f17 readMplexVarint should return uint64 2020-03-24 15:41:40 -06:00
Dmitriy Ryajov 2de98751ae fix: use exact types for mplex id 2020-03-24 15:41:40 -06:00
Giovanni Petrantoni 0a3e4a764b
Less verbose traces (#112)
* Make traces less verbose with shortHexDump utility

* Rename shortHexDump into shortLog

* Improve shortLog, add shortLog for crypto keys

* Add proper shortLog implementations in messages
2020-03-23 15:03:36 +09:00
Dmitriy Ryajov 761b221b75 don't trace the payload 2020-03-12 08:01:43 -06:00
Dmitriy Ryajov 5c234f704d added 1 byte jitter test 2020-03-12 08:01:43 -06:00
Dmitriy Ryajov 406b79887d add jitter tolerance to mplex 2020-03-12 08:01:43 -06:00
Dmitriy Ryajov 82af623641 use correct shift 2020-03-11 09:58:24 -06:00
Dmitriy Ryajov 07695b2260 use `readExactly` not `read` to read all bytes 2020-03-11 09:58:24 -06:00
Eugene Kabanov 381630f185
Fix and refactoring of some procedures which are able to return nil as result (#97)
* Fix do not return nil as result.

* Fix mplex test to properly raise.
2020-03-04 21:45:14 +02:00
Dmitriy Ryajov 1a987a9c5b fix: delete mplex channel 2020-02-16 13:51:03 -06:00
Dmitriy Ryajov 65ed2c7cee make code more robust 2020-02-16 11:31:35 -06:00
Dmitriy Ryajov acdaeb8f5d working out synchronization issues 2020-02-16 11:31:35 -06:00
Dmitriy Ryajov b1dd564c32 make sure we don't exit the handler prematurely 2020-02-16 11:31:35 -06:00
Dmitriy Ryajov f9ad113d11 don't send close message if remote closed 2020-02-16 11:31:35 -06:00
Dmitriy Ryajov f767614827 remove unnecesary async lock 2020-02-16 11:31:35 -06:00
Dmitriy Ryajov 934c858542 increase timeout to allow floodsub to finish 2020-02-16 11:31:35 -06:00
Dmitriy Ryajov 0349165830 typo 2020-02-16 11:31:35 -06:00
Dmitriy Ryajov 7f8eb0272e cleanup and fix tests 2020-02-16 11:31:35 -06:00
Dmitriy Ryajov 53e163abf2 check for size bounds when reading varints 2020-02-16 11:31:35 -06:00
Dmitriy Ryajov 94fc4e6fd2 don't use sleeps for synchronization 2020-02-16 11:31:35 -06:00
Giovanni Petrantoni 39dc9ad8a3 Revert "Implement timeout in mplex in order to read reliably close state"
This reverts commit 314cb6e6bf.
2020-02-12 11:57:38 -05:00
Giovanni Petrantoni 11bd55308f Revert "Properly use already specified MaxReadWriteTime as timeout"
This reverts commit 8f5dd75e7f.
2020-02-12 11:57:38 -05:00
Giovanni Petrantoni ea0d167285 Fix max size write mplex test 2020-02-12 11:57:38 -05:00
Giovanni Petrantoni cf5dd27e57 Properly use already specified MaxReadWriteTime as timeout 2020-02-12 11:57:38 -05:00
Giovanni Petrantoni 4034dfae19 Implement timeout in mplex in order to read reliably close state 2020-02-12 11:57:38 -05:00
Giovanni Petrantoni 136ac3f550 Use already existing error for channel push over size 2020-02-12 11:57:38 -05:00
Giovanni Petrantoni 120ba0d528 Add a safety check on message size limit when pushing new data in mplex 2020-02-12 11:57:38 -05:00
Giovanni Petrantoni 23712ecf3b
Lazy channels (#78)
* Implemented lazy stream opening for mplex connections

* Properly fix newStream usage

* Make lazy channel open optional

* Add Lazy channel test

* Cleanup mplex test

* Move lazyness properly into LPChannel

* Connection writeLp back to proc
2020-02-11 12:30:36 -05:00