nim-libp2p/tests/pubsub/testgossipsub.nim

1066 lines
32 KiB
Nim
Raw Normal View History

2022-07-01 18:19:57 +00:00
# Nim-Libp2p
2023-01-20 14:47:40 +00:00
# Copyright (c) 2023 Status Research & Development GmbH
2022-07-01 18:19:57 +00:00
# Licensed under either of
# * Apache License, version 2.0, ([LICENSE-APACHE](LICENSE-APACHE))
# * MIT license ([LICENSE-MIT](LICENSE-MIT))
# at your option.
# This file may not be copied, modified, or distributed except according to
# those terms.
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
2020-05-08 20:58:23 +00:00
{.used.}
import sequtils, options, tables, sets, sugar
2023-10-05 15:12:07 +00:00
import chronos, stew/byteutils, chronos/ratelimit
import chronicles
2023-10-05 15:12:07 +00:00
import metrics
import utils, ../../libp2p/[errors,
peerid,
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
peerinfo,
stream/connection,
stream/bufferstream,
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
crypto/crypto,
protocols/pubsub/pubsub,
protocols/pubsub/gossipsub,
2023-10-05 15:12:07 +00:00
protocols/pubsub/gossipsub/scoring,
protocols/pubsub/pubsubpeer,
protocols/pubsub/peertable,
protocols/pubsub/timedcache,
protocols/pubsub/rpc/messages]
import ../../libp2p/protocols/pubsub/errors as pubsub_errors
import ../helpers
proc `$`(peer: PubSubPeer): string = shortLog(peer)
template tryPublish(call: untyped, require: int, wait = 10.milliseconds, timeout = 5.seconds): untyped =
var
expiration = Moment.now() + timeout
pubs = 0
while pubs < require and Moment.now() < expiration:
pubs = pubs + call
await sleepAsync(wait)
doAssert pubs >= require, "Failed to publish!"
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
suite "GossipSub":
teardown:
checkTrackers()
asyncTest "GossipSub validation should succeed":
var handlerFut = newFuture[bool]()
proc handler(topic: string, data: seq[byte]) {.async, gcsafe.} =
check topic == "foobar"
handlerFut.complete(true)
let
nodes = generateNodes(2, gossip = true)
# start switches
nodesFut = await allFinished(
nodes[0].switch.start(),
nodes[1].switch.start(),
)
await subscribeNodes(nodes)
nodes[0].subscribe("foobar", handler)
nodes[1].subscribe("foobar", handler)
var subs: seq[Future[void]]
subs &= waitSub(nodes[1], nodes[0], "foobar")
subs &= waitSub(nodes[0], nodes[1], "foobar")
await allFuturesThrowing(subs)
var validatorFut = newFuture[bool]()
proc validator(topic: string,
message: Message):
Future[ValidationResult] {.async.} =
check topic == "foobar"
validatorFut.complete(true)
result = ValidationResult.Accept
nodes[1].addValidator("foobar", validator)
tryPublish await nodes[0].publish("foobar", "Hello!".toBytes()), 1
check (await validatorFut) and (await handlerFut)
await allFuturesThrowing(
nodes[0].switch.stop(),
nodes[1].switch.stop()
)
Gossip one one (#240) * allow multiple codecs per protocol (without breaking things) * add 1.1 protocol to gossip * explicit peering part 1 * explicit peering part 2 * explicit peering part 3 * PeerInfo and ControlPrune protocols * fix encodePrune * validated always, even explicit peers * prune by score (score is stub still) * add a way to pass parameters to gossip * standard setup fixes * take into account explicit direct peers in publish * add floodPublish logic * small fixes, publish still half broken * make sure to waitsub in sparse test * use var semantics to optimize table access * wip... lvalues don't work properly sadly... * big publish refactor, replenish and balance * fix internal tests * use g.peers for fanout (todo: don't include flood peers) * exclude non gossip from fanout * internal test fixes * fix flood tests * fix test's trypublish * test interop fixes * make sure to not remove peers from gossip table * restore old replenishFanout * cleanups * restore utility module import * restore trace vs debug in gossip * improve fanout replenish behavior further * triage publish nil peers (issue is on master too but just hidden behind a if/in) * getGossipPeers fixes * remove topics from pubsubpeer (was unused) * simplify rebalanceMesh (following spec) and make it finally reach D_high * better diagnostics * merge new pubsubpeer, copy 1.1 to new module * fix up merge * conditional enable gossip11 module * add back topics in peers, re-enable flood publish * add more heartbeat locking to prevent races * actually lock the heartbeat * minor fixes * with sugar * merge 1.0 * remove assertion in publish * fix multistream 1.1 multi proto * Fix merge oops * wip * fix gossip 11 upstream * gossipsub11 -> gossipsub * support interop testing * tests fixing * fix directchat build * control prune updates (pb) * wip parameters * gossip internal tests fixes * parameters wip * finishup with params * cleanups/wip * small sugar * grafted and pruned procs * wip updateScores * wip * fix logging issue * pubsubpeer, chronicles explicit override * fix internal gossip tests * wip * tables troubleshooting * score wip * score wip * fixes * fix test utils generateNodes * don't delete while iterating in score update * fix grafted defect * add a handleConnect in subscribeTopic * pruning improvements * wip * score fixes * post merge - builds gossip tests * further merge fixes * rebalance improvements and opportunistic grafting * fix test for now * restore explicit peering * implement peer exchange graft message * add an hard cap to PX * backoff time management * IWANT cap/budget * Adaptive gossip dissemination * outbound mesh quota, internal tests fixing * oversub prune score based, finish outbound quota * finishup with score and ihave budget * use go daemon 0.3.0 * import fixes * byScore cleanup score sorting * remove pointless scaling in `/` Duration operator * revert using libp2p org for daemon * interop fixes * fixes and cleanup * remove heartbeat assertion, minor debug fixes * logging improvements and cleaning up * (to revert) add some traces * add explicit topic to gossip rpcs * pubsub merge fixes and type fix in switch * Revert "(to revert) add some traces" This reverts commit 4663eaab6cc336c81cee50bc54025cf0b7bcbd99. * cleanup some now irrelevant todo * shuffle peers anyway as score might be disabled * add missing shuffle * old merge fix * more merge fixes * debug improvements * re-enable gossip internal tests * add gossip10 fallback (dormant but tested) * split gossipsub internal tests into 1.0 and 1.1 Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
2020-09-21 09:16:29 +00:00
await allFuturesThrowing(nodesFut.concat())
Gossip one one (#240) * allow multiple codecs per protocol (without breaking things) * add 1.1 protocol to gossip * explicit peering part 1 * explicit peering part 2 * explicit peering part 3 * PeerInfo and ControlPrune protocols * fix encodePrune * validated always, even explicit peers * prune by score (score is stub still) * add a way to pass parameters to gossip * standard setup fixes * take into account explicit direct peers in publish * add floodPublish logic * small fixes, publish still half broken * make sure to waitsub in sparse test * use var semantics to optimize table access * wip... lvalues don't work properly sadly... * big publish refactor, replenish and balance * fix internal tests * use g.peers for fanout (todo: don't include flood peers) * exclude non gossip from fanout * internal test fixes * fix flood tests * fix test's trypublish * test interop fixes * make sure to not remove peers from gossip table * restore old replenishFanout * cleanups * restore utility module import * restore trace vs debug in gossip * improve fanout replenish behavior further * triage publish nil peers (issue is on master too but just hidden behind a if/in) * getGossipPeers fixes * remove topics from pubsubpeer (was unused) * simplify rebalanceMesh (following spec) and make it finally reach D_high * better diagnostics * merge new pubsubpeer, copy 1.1 to new module * fix up merge * conditional enable gossip11 module * add back topics in peers, re-enable flood publish * add more heartbeat locking to prevent races * actually lock the heartbeat * minor fixes * with sugar * merge 1.0 * remove assertion in publish * fix multistream 1.1 multi proto * Fix merge oops * wip * fix gossip 11 upstream * gossipsub11 -> gossipsub * support interop testing * tests fixing * fix directchat build * control prune updates (pb) * wip parameters * gossip internal tests fixes * parameters wip * finishup with params * cleanups/wip * small sugar * grafted and pruned procs * wip updateScores * wip * fix logging issue * pubsubpeer, chronicles explicit override * fix internal gossip tests * wip * tables troubleshooting * score wip * score wip * fixes * fix test utils generateNodes * don't delete while iterating in score update * fix grafted defect * add a handleConnect in subscribeTopic * pruning improvements * wip * score fixes * post merge - builds gossip tests * further merge fixes * rebalance improvements and opportunistic grafting * fix test for now * restore explicit peering * implement peer exchange graft message * add an hard cap to PX * backoff time management * IWANT cap/budget * Adaptive gossip dissemination * outbound mesh quota, internal tests fixing * oversub prune score based, finish outbound quota * finishup with score and ihave budget * use go daemon 0.3.0 * import fixes * byScore cleanup score sorting * remove pointless scaling in `/` Duration operator * revert using libp2p org for daemon * interop fixes * fixes and cleanup * remove heartbeat assertion, minor debug fixes * logging improvements and cleaning up * (to revert) add some traces * add explicit topic to gossip rpcs * pubsub merge fixes and type fix in switch * Revert "(to revert) add some traces" This reverts commit 4663eaab6cc336c81cee50bc54025cf0b7bcbd99. * cleanup some now irrelevant todo * shuffle peers anyway as score might be disabled * add missing shuffle * old merge fix * more merge fixes * debug improvements * re-enable gossip internal tests * add gossip10 fallback (dormant but tested) * split gossipsub internal tests into 1.0 and 1.1 Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
2020-09-21 09:16:29 +00:00
asyncTest "GossipSub validation should fail (reject)":
proc handler(topic: string, data: seq[byte]) {.async, gcsafe.} =
check false # if we get here, it should fail
let
nodes = generateNodes(2, gossip = true)
# start switches
nodesFut = await allFinished(
nodes[0].switch.start(),
nodes[1].switch.start(),
)
await subscribeNodes(nodes)
nodes[0].subscribe("foobar", handler)
nodes[1].subscribe("foobar", handler)
2023-03-08 11:30:19 +00:00
await waitSubGraph(nodes, "foobar")
let gossip1 = GossipSub(nodes[0])
let gossip2 = GossipSub(nodes[1])
check:
gossip1.mesh["foobar"].len == 1 and "foobar" notin gossip1.fanout
gossip2.mesh["foobar"].len == 1 and "foobar" notin gossip2.fanout
var validatorFut = newFuture[bool]()
proc validator(topic: string,
message: Message):
Future[ValidationResult] {.async.} =
result = ValidationResult.Reject
validatorFut.complete(true)
nodes[1].addValidator("foobar", validator)
tryPublish await nodes[0].publish("foobar", "Hello!".toBytes()), 1
check (await validatorFut) == true
await allFuturesThrowing(
nodes[0].switch.stop(),
nodes[1].switch.stop()
)
await allFuturesThrowing(nodesFut.concat())
asyncTest "GossipSub validation should fail (ignore)":
proc handler(topic: string, data: seq[byte]) {.async, gcsafe.} =
check false # if we get here, it should fail
let
nodes = generateNodes(2, gossip = true)
# start switches
nodesFut = await allFinished(
nodes[0].switch.start(),
nodes[1].switch.start(),
)
await subscribeNodes(nodes)
nodes[0].subscribe("foobar", handler)
nodes[1].subscribe("foobar", handler)
2023-03-08 11:30:19 +00:00
await waitSubGraph(nodes, "foobar")
let gossip1 = GossipSub(nodes[0])
let gossip2 = GossipSub(nodes[1])
check:
gossip1.mesh["foobar"].len == 1 and "foobar" notin gossip1.fanout
gossip2.mesh["foobar"].len == 1 and "foobar" notin gossip2.fanout
var validatorFut = newFuture[bool]()
proc validator(topic: string,
message: Message):
Future[ValidationResult] {.async.} =
result = ValidationResult.Ignore
validatorFut.complete(true)
nodes[1].addValidator("foobar", validator)
tryPublish await nodes[0].publish("foobar", "Hello!".toBytes()), 1
check (await validatorFut) == true
await allFuturesThrowing(
nodes[0].switch.stop(),
nodes[1].switch.stop()
)
await allFuturesThrowing(nodesFut.concat())
asyncTest "GossipSub validation one fails and one succeeds":
var handlerFut = newFuture[bool]()
proc handler(topic: string, data: seq[byte]) {.async, gcsafe.} =
check topic == "foo"
handlerFut.complete(true)
let
nodes = generateNodes(2, gossip = true)
# start switches
nodesFut = await allFinished(
nodes[0].switch.start(),
nodes[1].switch.start(),
)
await subscribeNodes(nodes)
nodes[1].subscribe("foo", handler)
nodes[1].subscribe("bar", handler)
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
var passed, failed: Future[bool] = newFuture[bool]()
proc validator(topic: string,
message: Message):
Future[ValidationResult] {.async.} =
result = if topic == "foo":
passed.complete(true)
ValidationResult.Accept
else:
failed.complete(true)
ValidationResult.Reject
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
nodes[1].addValidator("foo", "bar", validator)
tryPublish await nodes[0].publish("foo", "Hello!".toBytes()), 1
tryPublish await nodes[0].publish("bar", "Hello!".toBytes()), 1
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
check ((await passed) and (await failed) and (await handlerFut))
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
let gossip1 = GossipSub(nodes[0])
let gossip2 = GossipSub(nodes[1])
check:
"foo" notin gossip1.mesh and gossip1.fanout["foo"].len == 1
"foo" notin gossip2.mesh and "foo" notin gossip2.fanout
"bar" notin gossip1.mesh and gossip1.fanout["bar"].len == 1
"bar" notin gossip2.mesh and "bar" notin gossip2.fanout
await allFuturesThrowing(
nodes[0].switch.stop(),
nodes[1].switch.stop()
)
await allFuturesThrowing(nodesFut.concat())
asyncTest "GossipSub unsub - resub faster than backoff":
var handlerFut = newFuture[bool]()
proc handler(topic: string, data: seq[byte]) {.async, gcsafe.} =
check topic == "foobar"
handlerFut.complete(true)
let
nodes = generateNodes(2, gossip = true)
# start switches
nodesFut = await allFinished(
nodes[0].switch.start(),
nodes[1].switch.start(),
)
await subscribeNodes(nodes)
nodes[0].subscribe("foobar", handler)
nodes[1].subscribe("foobar", handler)
var subs: seq[Future[void]]
subs &= waitSub(nodes[1], nodes[0], "foobar")
subs &= waitSub(nodes[0], nodes[1], "foobar")
await allFuturesThrowing(subs)
nodes[0].unsubscribe("foobar", handler)
nodes[0].subscribe("foobar", handler)
# regular backoff is 60 seconds, so we must not wait that long
await (waitSub(nodes[0], nodes[1], "foobar") and waitSub(nodes[1], nodes[0], "foobar")).wait(30.seconds)
var validatorFut = newFuture[bool]()
proc validator(topic: string,
message: Message):
Future[ValidationResult] {.async.} =
check topic == "foobar"
validatorFut.complete(true)
result = ValidationResult.Accept
nodes[1].addValidator("foobar", validator)
tryPublish await nodes[0].publish("foobar", "Hello!".toBytes()), 1
check (await validatorFut) and (await handlerFut)
await allFuturesThrowing(
nodes[0].switch.stop(),
nodes[1].switch.stop()
)
await allFuturesThrowing(nodesFut.concat())
asyncTest "e2e - GossipSub should add remote peer topic subscriptions":
proc handler(topic: string, data: seq[byte]) {.async, gcsafe.} =
discard
let
nodes = generateNodes(
2,
gossip = true)
# start switches
nodesFut = await allFinished(
nodes[0].switch.start(),
nodes[1].switch.start(),
)
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
await subscribeNodes(nodes)
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
nodes[1].subscribe("foobar", handler)
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
let gossip1 = GossipSub(nodes[0])
let gossip2 = GossipSub(nodes[1])
checkExpiring:
"foobar" in gossip2.topics and
"foobar" in gossip1.gossipsub and
2021-12-16 10:05:20 +00:00
gossip1.gossipsub.hasPeerId("foobar", gossip2.peerInfo.peerId)
await allFuturesThrowing(
nodes[0].switch.stop(),
nodes[1].switch.stop()
)
await allFuturesThrowing(nodesFut.concat())
asyncTest "e2e - GossipSub should add remote peer topic subscriptions if both peers are subscribed":
proc handler(topic: string, data: seq[byte]) {.async, gcsafe.} =
discard
let
nodes = generateNodes(
2,
gossip = true)
# start switches
nodesFut = await allFinished(
nodes[0].switch.start(),
nodes[1].switch.start(),
)
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
await subscribeNodes(nodes)
nodes[0].subscribe("foobar", handler)
nodes[1].subscribe("foobar", handler)
var subs: seq[Future[void]]
subs &= waitSub(nodes[1], nodes[0], "foobar")
subs &= waitSub(nodes[0], nodes[1], "foobar")
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
await allFuturesThrowing(subs)
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
let
gossip1 = GossipSub(nodes[0])
gossip2 = GossipSub(nodes[1])
check:
"foobar" in gossip1.topics
"foobar" in gossip2.topics
"foobar" in gossip1.gossipsub
"foobar" in gossip2.gossipsub
2021-12-16 10:05:20 +00:00
gossip1.gossipsub.hasPeerId("foobar", gossip2.peerInfo.peerId) or
gossip1.mesh.hasPeerId("foobar", gossip2.peerInfo.peerId)
2021-12-16 10:05:20 +00:00
gossip2.gossipsub.hasPeerId("foobar", gossip1.peerInfo.peerId) or
gossip2.mesh.hasPeerId("foobar", gossip1.peerInfo.peerId)
await allFuturesThrowing(
nodes[0].switch.stop(),
nodes[1].switch.stop()
)
await allFuturesThrowing(nodesFut.concat())
asyncTest "e2e - GossipSub send over fanout A -> B":
var passed = newFuture[void]()
proc handler(topic: string, data: seq[byte]) {.async, gcsafe.} =
check topic == "foobar"
passed.complete()
let
nodes = generateNodes(
2,
gossip = true)
# start switches
nodesFut = await allFinished(
nodes[0].switch.start(),
nodes[1].switch.start(),
)
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
await subscribeNodes(nodes)
nodes[1].subscribe("foobar", handler)
await waitSub(nodes[0], nodes[1], "foobar")
var observed = 0
let
obs1 = PubSubObserver(onRecv: proc(peer: PubSubPeer; msgs: var RPCMsg) =
inc observed
)
obs2 = PubSubObserver(onSend: proc(peer: PubSubPeer; msgs: var RPCMsg) =
inc observed
)
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
nodes[1].addObserver(obs1)
nodes[0].addObserver(obs2)
tryPublish await nodes[0].publish("foobar", "Hello!".toBytes()), 1
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
var gossip1: GossipSub = GossipSub(nodes[0])
var gossip2: GossipSub = GossipSub(nodes[1])
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
check:
"foobar" in gossip1.gossipsub
2021-12-16 10:05:20 +00:00
gossip1.fanout.hasPeerId("foobar", gossip2.peerInfo.peerId)
not gossip1.mesh.hasPeerId("foobar", gossip2.peerInfo.peerId)
await passed.wait(2.seconds)
await allFuturesThrowing(
nodes[0].switch.stop(),
nodes[1].switch.stop()
)
await allFuturesThrowing(nodesFut.concat())
check observed == 2
asyncTest "e2e - GossipSub send over fanout A -> B for subscribed topic":
var passed = newFuture[void]()
proc handler(topic: string, data: seq[byte]) {.async, gcsafe.} =
check topic == "foobar"
passed.complete()
let
nodes = generateNodes(
2,
2022-02-21 17:14:43 +00:00
gossip = true,
unsubscribeBackoff = 10.minutes)
# start switches
nodesFut = await allFinished(
nodes[0].switch.start(),
nodes[1].switch.start(),
)
2023-03-08 11:30:19 +00:00
GossipSub(nodes[1]).parameters.d = 0
GossipSub(nodes[1]).parameters.dHigh = 0
GossipSub(nodes[1]).parameters.dLow = 0
await subscribeNodes(nodes)
nodes[0].subscribe("foobar", handler)
2023-03-08 11:30:19 +00:00
nodes[1].subscribe("foobar", handler)
let gsNode = GossipSub(nodes[1])
2023-03-08 11:30:19 +00:00
checkExpiring:
gsNode.mesh.getOrDefault("foobar").len == 0 and
GossipSub(nodes[0]).mesh.getOrDefault("foobar").len == 0 and
(
GossipSub(nodes[0]).gossipsub.getOrDefault("foobar").len == 1 or
GossipSub(nodes[0]).fanout.getOrDefault("foobar").len == 1
)
tryPublish await nodes[0].publish("foobar", "Hello!".toBytes()), 1
check:
GossipSub(nodes[0]).fanout.getOrDefault("foobar").len > 0
GossipSub(nodes[0]).mesh.getOrDefault("foobar").len == 0
await passed.wait(2.seconds)
trace "test done, stopping..."
await allFuturesThrowing(
nodes[0].switch.stop(),
nodes[1].switch.stop()
)
await allFuturesThrowing(nodesFut.concat())
asyncTest "e2e - GossipSub send over mesh A -> B":
var passed: Future[bool] = newFuture[bool]()
proc handler(topic: string, data: seq[byte]) {.async, gcsafe.} =
check topic == "foobar"
passed.complete(true)
let
nodes = generateNodes(
2,
gossip = true)
# start switches
nodesFut = await allFinished(
nodes[0].switch.start(),
nodes[1].switch.start(),
)
await subscribeNodes(nodes)
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
nodes[0].subscribe("foobar", handler)
nodes[1].subscribe("foobar", handler)
await waitSub(nodes[0], nodes[1], "foobar")
2020-01-07 08:06:27 +00:00
tryPublish await nodes[0].publish("foobar", "Hello!".toBytes()), 1
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
check await passed
var gossip1: GossipSub = GossipSub(nodes[0])
var gossip2: GossipSub = GossipSub(nodes[1])
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
check:
"foobar" in gossip1.gossipsub
"foobar" in gossip2.gossipsub
2021-12-16 10:05:20 +00:00
gossip1.mesh.hasPeerId("foobar", gossip2.peerInfo.peerId)
not gossip1.fanout.hasPeerId("foobar", gossip2.peerInfo.peerId)
gossip2.mesh.hasPeerId("foobar", gossip1.peerInfo.peerId)
not gossip2.fanout.hasPeerId("foobar", gossip1.peerInfo.peerId)
await allFuturesThrowing(
nodes[0].switch.stop(),
nodes[1].switch.stop()
)
await allFuturesThrowing(nodesFut.concat())
asyncTest "e2e - GossipSub should not send to source & peers who already seen":
# 3 nodes: A, B, C
2023-03-08 11:30:19 +00:00
# A publishes, C relays, B is having a long validation
# so B should not send to anyone
let
nodes = generateNodes(
3,
gossip = true)
# start switches
nodesFut = await allFinished(
nodes[0].switch.start(),
nodes[1].switch.start(),
nodes[2].switch.start(),
)
await subscribeNodes(nodes)
var cRelayed: Future[void] = newFuture[void]()
var bFinished: Future[void] = newFuture[void]()
var
aReceived = 0
cReceived = 0
proc handlerA(topic: string, data: seq[byte]) {.async, gcsafe.} =
inc aReceived
check aReceived < 2
proc handlerB(topic: string, data: seq[byte]) {.async, gcsafe.} = discard
proc handlerC(topic: string, data: seq[byte]) {.async, gcsafe.} =
inc cReceived
check cReceived < 2
cRelayed.complete()
nodes[0].subscribe("foobar", handlerA)
nodes[1].subscribe("foobar", handlerB)
nodes[2].subscribe("foobar", handlerC)
2023-03-08 11:30:19 +00:00
await waitSubGraph(nodes, "foobar")
var gossip1: GossipSub = GossipSub(nodes[0])
var gossip2: GossipSub = GossipSub(nodes[1])
var gossip3: GossipSub = GossipSub(nodes[2])
proc slowValidator(topic: string, message: Message): Future[ValidationResult] {.async.} =
await cRelayed
# Empty A & C caches to detect duplicates
gossip1.seen = TimedCache[MessageId].init()
gossip3.seen = TimedCache[MessageId].init()
let msgId = toSeq(gossip2.validationSeen.keys)[0]
checkExpiring(try: gossip2.validationSeen[msgId].len > 0 except: false)
result = ValidationResult.Accept
bFinished.complete()
nodes[1].addValidator("foobar", slowValidator)
2023-03-08 11:30:19 +00:00
checkExpiring(
gossip1.mesh.getOrDefault("foobar").len == 2 and
gossip2.mesh.getOrDefault("foobar").len == 2 and
gossip3.mesh.getOrDefault("foobar").len == 2)
tryPublish await nodes[0].publish("foobar", "Hello!".toBytes()), 2
await bFinished
await allFuturesThrowing(
nodes[0].switch.stop(),
nodes[1].switch.stop(),
nodes[2].switch.stop()
)
await allFuturesThrowing(nodesFut.concat())
asyncTest "e2e - GossipSub send over floodPublish A -> B":
var passed: Future[bool] = newFuture[bool]()
proc handler(topic: string, data: seq[byte]) {.async, gcsafe.} =
check topic == "foobar"
passed.complete(true)
let
nodes = generateNodes(
2,
gossip = true)
# start switches
nodesFut = await allFinished(
nodes[0].switch.start(),
nodes[1].switch.start(),
)
var gossip1: GossipSub = GossipSub(nodes[0])
gossip1.parameters.floodPublish = true
var gossip2: GossipSub = GossipSub(nodes[1])
gossip2.parameters.floodPublish = true
await subscribeNodes(nodes)
# nodes[0].subscribe("foobar", handler)
nodes[1].subscribe("foobar", handler)
await waitSub(nodes[0], nodes[1], "foobar")
tryPublish await nodes[0].publish("foobar", "Hello!".toBytes()), 1
2023-03-08 11:30:19 +00:00
check await passed.wait(10.seconds)
check:
"foobar" in gossip1.gossipsub
"foobar" notin gossip2.gossipsub
2021-12-16 10:05:20 +00:00
not gossip1.mesh.hasPeerId("foobar", gossip2.peerInfo.peerId)
await allFuturesThrowing(
nodes[0].switch.stop(),
nodes[1].switch.stop()
)
await allFuturesThrowing(nodesFut.concat())
# Helper procedures to avoid repetition
proc setupNodes(count: int): seq[PubSub] =
generateNodes(count, gossip = true)
proc startNodes(nodes: seq[PubSub]) {.async.} =
await allFuturesThrowing(
nodes.mapIt(it.switch.start())
)
proc stopNodes(nodes: seq[PubSub]) {.async.} =
await allFuturesThrowing(
nodes.mapIt(it.switch.stop())
)
proc connectNodes(nodes: seq[PubSub], target: PubSub) {.async.} =
proc handler(topic: string, data: seq[byte]) {.async, gcsafe.} =
check topic == "foobar"
for node in nodes:
node.subscribe("foobar", handler)
await node.switch.connect(target.peerInfo.peerId, target.peerInfo.addrs)
proc baseTestProcedure(nodes: seq[PubSub], gossip1: GossipSub, numPeersFirstMsg: int, numPeersSecondMsg: int) {.async.} =
proc handler(topic: string, data: seq[byte]) {.async, gcsafe.} =
check topic == "foobar"
block setup:
for i in 0..<50:
if (await nodes[0].publish("foobar", ("Hello!" & $i).toBytes())) == 19:
break setup
await sleepAsync(10.milliseconds)
check false
check (await nodes[0].publish("foobar", newSeq[byte](2_500_000))) == numPeersFirstMsg
check (await nodes[0].publish("foobar", newSeq[byte](500_001))) == numPeersSecondMsg
# Now try with a mesh
gossip1.subscribe("foobar", handler)
checkExpiring: gossip1.mesh.peers("foobar") > 5
# use a different length so that the message is not equal to the last
check (await nodes[0].publish("foobar", newSeq[byte](500_000))) == numPeersSecondMsg
# Actual tests
asyncTest "e2e - GossipSub floodPublish limit":
let
nodes = setupNodes(20)
gossip1 = GossipSub(nodes[0])
gossip1.parameters.floodPublish = true
gossip1.parameters.heartbeatInterval = milliseconds(700)
await startNodes(nodes)
await connectNodes(nodes[1..^1], nodes[0])
await baseTestProcedure(nodes, gossip1, gossip1.parameters.dLow, 17)
await stopNodes(nodes)
asyncTest "e2e - GossipSub floodPublish limit with bandwidthEstimatebps = 0":
let
nodes = setupNodes(20)
gossip1 = GossipSub(nodes[0])
gossip1.parameters.floodPublish = true
gossip1.parameters.heartbeatInterval = milliseconds(700)
gossip1.parameters.bandwidthEstimatebps = 0
await startNodes(nodes)
await connectNodes(nodes[1..^1], nodes[0])
await baseTestProcedure(nodes, gossip1, nodes.len - 1, nodes.len - 1)
await stopNodes(nodes)
asyncTest "e2e - GossipSub with multiple peers":
var runs = 10
let
nodes = generateNodes(runs, gossip = true, triggerSelf = true)
nodesFut = nodes.mapIt(it.switch.start())
await subscribeNodes(nodes)
var seen: Table[string, int]
var seenFut = newFuture[void]()
for i in 0..<nodes.len:
let dialer = nodes[i]
var handler: TopicHandler
closureScope:
var peerName = $dialer.peerInfo.peerId
handler = proc(topic: string, data: seq[byte]) {.async, gcsafe, closure.} =
if peerName notin seen:
seen[peerName] = 0
seen[peerName].inc
check topic == "foobar"
if not seenFut.finished() and seen.len >= runs:
seenFut.complete()
dialer.subscribe("foobar", handler)
await waitSubGraph(nodes, "foobar")
tryPublish await wait(nodes[0].publish("foobar",
toBytes("from node " &
$nodes[0].peerInfo.peerId)),
1.minutes), 1
await wait(seenFut, 1.minutes)
check: seen.len >= runs
for k, v in seen.pairs:
check: v >= 1
for node in nodes:
var gossip = GossipSub(node)
check:
"foobar" in gossip.gossipsub
await allFuturesThrowing(
nodes.mapIt(
allFutures(
it.switch.stop())))
2020-01-10 03:59:27 +00:00
await allFuturesThrowing(nodesFut)
asyncTest "e2e - GossipSub with multiple peers (sparse)":
var runs = 10
let
nodes = generateNodes(runs, gossip = true, triggerSelf = true)
nodesFut = nodes.mapIt(it.switch.start())
await subscribeSparseNodes(nodes)
var seen: Table[string, int]
var seenFut = newFuture[void]()
for i in 0..<nodes.len:
let dialer = nodes[i]
var handler: TopicHandler
capture dialer, i:
var peerName = $dialer.peerInfo.peerId
handler = proc(topic: string, data: seq[byte]) {.async, gcsafe, closure.} =
if peerName notin seen:
seen[peerName] = 0
seen[peerName].inc
check topic == "foobar"
if not seenFut.finished() and seen.len >= runs:
seenFut.complete()
dialer.subscribe("foobar", handler)
await waitSubGraph(nodes, "foobar")
tryPublish await wait(nodes[0].publish("foobar",
toBytes("from node " &
$nodes[0].peerInfo.peerId)),
1.minutes), 1
await wait(seenFut, 60.seconds)
check: seen.len >= runs
for k, v in seen.pairs:
check: v >= 1
for node in nodes:
var gossip = GossipSub(node)
check:
"foobar" in gossip.gossipsub
gossip.fanout.len == 0
gossip.mesh["foobar"].len > 0
await allFuturesThrowing(
nodes.mapIt(
allFutures(
it.switch.stop())))
await allFuturesThrowing(nodesFut)
asyncTest "e2e - GossipSub peer exchange":
# A, B & C are subscribed to something
# B unsubcribe from it, it should send
# PX to A & C
#
# C sent his SPR, not A
proc handler(topic: string, data: seq[byte]) {.async, gcsafe.} =
discard # not used in this test
let
nodes = generateNodes(
2,
gossip = true,
enablePX = true) &
generateNodes(1, gossip = true, sendSignedPeerRecord = true)
# start switches
nodesFut = await allFinished(
nodes[0].switch.start(),
nodes[1].switch.start(),
nodes[2].switch.start(),
)
var
gossip0 = GossipSub(nodes[0])
gossip1 = GossipSub(nodes[1])
gossip2 = GossipSub(nodes[1])
await subscribeNodes(nodes)
nodes[0].subscribe("foobar", handler)
nodes[1].subscribe("foobar", handler)
nodes[2].subscribe("foobar", handler)
for x in 0..<3:
for y in 0..<3:
if x != y:
await waitSub(nodes[x], nodes[y], "foobar")
var passed: Future[void] = newFuture[void]()
gossip0.routingRecordsHandler.add(proc(peer: PeerId, tag: string, peers: seq[RoutingRecordsPair]) =
check:
tag == "foobar"
peers.len == 2
peers[0].record.isSome() xor peers[1].record.isSome()
passed.complete()
)
nodes[1].unsubscribe("foobar", handler)
await passed.wait(5.seconds)
await allFuturesThrowing(
nodes[0].switch.stop(),
nodes[1].switch.stop(),
nodes[2].switch.stop()
)
await allFuturesThrowing(nodesFut.concat())
2023-07-28 08:58:05 +00:00
asyncTest "e2e - iDontWant":
# 3 nodes: A <=> B <=> C
# (A & C are NOT connected). We pre-emptively send a dontwant from C to B,
# and check that B doesn't relay the message to C.
# We also check that B sends IDONTWANT to C, but not A
func dumbMsgIdProvider(m: Message): Result[MessageId, ValidationResult] =
ok(newSeq[byte](10))
let
nodes = generateNodes(
3,
gossip = true,
msgIdProvider = dumbMsgIdProvider
)
nodesFut = await allFinished(
nodes[0].switch.start(),
nodes[1].switch.start(),
nodes[2].switch.start(),
)
await nodes[0].switch.connect(nodes[1].switch.peerInfo.peerId, nodes[1].switch.peerInfo.addrs)
await nodes[1].switch.connect(nodes[2].switch.peerInfo.peerId, nodes[2].switch.peerInfo.addrs)
let bFinished = newFuture[void]()
proc handlerA(topic: string, data: seq[byte]) {.async, gcsafe.} = discard
proc handlerB(topic: string, data: seq[byte]) {.async, gcsafe.} = bFinished.complete()
proc handlerC(topic: string, data: seq[byte]) {.async, gcsafe.} = doAssert false
nodes[0].subscribe("foobar", handlerA)
nodes[1].subscribe("foobar", handlerB)
nodes[2].subscribe("foobar", handlerB)
await waitSubGraph(nodes, "foobar")
var gossip1: GossipSub = GossipSub(nodes[0])
var gossip2: GossipSub = GossipSub(nodes[1])
var gossip3: GossipSub = GossipSub(nodes[2])
check: gossip3.mesh.peers("foobar") == 1
gossip3.broadcast(gossip3.mesh["foobar"], RPCMsg(control: some(ControlMessage(
idontwant: @[ControlIWant(messageIds: @[newSeq[byte](10)])]
))))
checkExpiring: gossip2.mesh.getOrDefault("foobar").anyIt(it.heDontWants[^1].len == 1)
tryPublish await nodes[0].publish("foobar", newSeq[byte](10000)), 1
await bFinished
checkExpiring: toSeq(gossip3.mesh.getOrDefault("foobar")).anyIt(it.heDontWants[^1].len == 1)
check: toSeq(gossip1.mesh.getOrDefault("foobar")).anyIt(it.heDontWants[^1].len == 0)
await allFuturesThrowing(
nodes[0].switch.stop(),
nodes[1].switch.stop(),
nodes[2].switch.stop()
)
await allFuturesThrowing(nodesFut.concat())
2023-10-05 15:12:07 +00:00
proc initializeGossipTest(): Future[(seq[PubSub], GossipSub, GossipSub)] {.async.} =
let nodes = generateNodes(
2,
gossip = true,
overheadRateLimit = Opt.some((20, 1.millis)))
discard await allFinished(
nodes[0].switch.start(),
nodes[1].switch.start(),
)
await subscribeNodes(nodes)
proc handle(topic: string, data: seq[byte]) {.async, gcsafe.} = discard
let gossip0 = GossipSub(nodes[0])
let gossip1 = GossipSub(nodes[1])
gossip0.subscribe("foobar", handle)
gossip1.subscribe("foobar", handle)
await waitSubGraph(nodes, "foobar")
2023-11-09 13:20:28 +00:00
# Avoid being disconnected by failing signature verification
gossip0.verifySignature = false
gossip1.verifySignature = false
2023-10-05 15:12:07 +00:00
return (nodes, gossip0, gossip1)
proc currentRateLimitHits(): float64 =
try:
libp2p_gossipsub_peers_rate_limit_hits.valueByName("libp2p_gossipsub_peers_rate_limit_hits_total", @["nim-libp2p"])
except KeyError:
0
asyncTest "e2e - GossipSub should not rate limit decodable messages below the size allowed":
let rateLimitHits = currentRateLimitHits()
let (nodes, gossip0, gossip1) = await initializeGossipTest()
2023-11-09 13:20:28 +00:00
gossip0.broadcast(gossip0.mesh["foobar"], RPCMsg(messages: @[Message(topicIDs: @["foobar"], data: newSeq[byte](10))]))
2023-10-05 15:12:07 +00:00
await sleepAsync(300.millis)
check currentRateLimitHits() == rateLimitHits
check gossip1.switch.isConnected(gossip0.switch.peerInfo.peerId) == true
# Disconnect peer when rate limiting is enabled
gossip1.parameters.disconnectPeerAboveRateLimit = true
2023-11-09 13:20:28 +00:00
gossip0.broadcast(gossip0.mesh["foobar"], RPCMsg(messages: @[Message(topicIDs: @["foobar"], data: newSeq[byte](12))]))
await sleepAsync(300.millis)
2023-10-05 15:12:07 +00:00
2023-11-09 13:20:28 +00:00
check gossip1.switch.isConnected(gossip0.switch.peerInfo.peerId) == true
2023-10-05 15:12:07 +00:00
check currentRateLimitHits() == rateLimitHits
await stopNodes(nodes)
asyncTest "e2e - GossipSub should rate limit undecodable messages above the size allowed":
let rateLimitHits = currentRateLimitHits()
let (nodes, gossip0, gossip1) = await initializeGossipTest()
# Simulate sending an undecodable message
2023-11-09 13:20:28 +00:00
await gossip1.peers[gossip0.switch.peerInfo.peerId].sendEncoded(newSeqWith[byte](33, 1.byte))
2023-10-05 15:12:07 +00:00
await sleepAsync(300.millis)
check currentRateLimitHits() == rateLimitHits + 1
check gossip1.switch.isConnected(gossip0.switch.peerInfo.peerId) == true
# Disconnect peer when rate limiting is enabled
gossip1.parameters.disconnectPeerAboveRateLimit = true
2023-11-09 13:20:28 +00:00
await gossip0.peers[gossip1.switch.peerInfo.peerId].sendEncoded(newSeqWith[byte](35, 1.byte))
2023-10-05 15:12:07 +00:00
checkExpiring gossip1.switch.isConnected(gossip0.switch.peerInfo.peerId) == false
check currentRateLimitHits() == rateLimitHits + 2
await stopNodes(nodes)
asyncTest "e2e - GossipSub should rate limit decodable messages above the size allowed":
let rateLimitHits = currentRateLimitHits()
let (nodes, gossip0, gossip1) = await initializeGossipTest()
let msg = RPCMsg(control: some(ControlMessage(prune: @[
ControlPrune(topicID: "foobar", peers: @[
2023-11-09 13:20:28 +00:00
PeerInfoMsg(peerId: PeerId(data: newSeq[byte](33)))
2023-10-05 15:12:07 +00:00
], backoff: 123'u64)
])))
gossip0.broadcast(gossip0.mesh["foobar"], msg)
await sleepAsync(300.millis)
check currentRateLimitHits() == rateLimitHits + 1
check gossip1.switch.isConnected(gossip0.switch.peerInfo.peerId) == true
# Disconnect peer when rate limiting is enabled
gossip1.parameters.disconnectPeerAboveRateLimit = true
2023-11-09 13:20:28 +00:00
let msg2 = RPCMsg(control: some(ControlMessage(prune: @[
ControlPrune(topicID: "foobar", peers: @[
PeerInfoMsg(peerId: PeerId(data: newSeq[byte](35)))
], backoff: 123'u64)
])))
gossip0.broadcast(gossip0.mesh["foobar"], msg2)
checkExpiring gossip1.switch.isConnected(gossip0.switch.peerInfo.peerId) == false
check currentRateLimitHits() == rateLimitHits + 2
await stopNodes(nodes)
asyncTest "e2e - GossipSub should rate limit invalid messages above the size allowed":
let rateLimitHits = currentRateLimitHits()
let (nodes, gossip0, gossip1) = await initializeGossipTest()
let topic = "foobar"
proc execValidator(topic: string, message: messages.Message): Future[ValidationResult] {.raises: [].} =
let res = newFuture[ValidationResult]()
res.complete(ValidationResult.Reject)
res
gossip0.addValidator(topic, execValidator)
gossip1.addValidator(topic, execValidator)
let msg = RPCMsg(messages: @[Message(topicIDs: @[topic], data: newSeq[byte](40))])
gossip0.broadcast(gossip0.mesh[topic], msg)
await sleepAsync(300.millis)
check currentRateLimitHits() == rateLimitHits + 1
check gossip1.switch.isConnected(gossip0.switch.peerInfo.peerId) == true
# Disconnect peer when rate limiting is enabled
gossip1.parameters.disconnectPeerAboveRateLimit = true
gossip0.broadcast(gossip0.mesh[topic], RPCMsg(messages: @[Message(topicIDs: @[topic], data: newSeq[byte](35))]))
2023-10-05 15:12:07 +00:00
checkExpiring gossip1.switch.isConnected(gossip0.switch.peerInfo.peerId) == false
check currentRateLimitHits() == rateLimitHits + 2
await stopNodes(nodes)