nim-libp2p/tests/testnoise.nim

300 lines
9.5 KiB
Nim
Raw Permalink Normal View History

{.used.}
# Nim-Libp2p
2023-01-20 14:47:40 +00:00
# Copyright (c) 2023 Status Research & Development GmbH
2022-07-01 18:19:57 +00:00
# Licensed under either of
# * Apache License, version 2.0, ([LICENSE-APACHE](LICENSE-APACHE))
# * MIT license ([LICENSE-MIT](LICENSE-MIT))
# at your option.
# This file may not be copied, modified, or distributed except according to
# those terms.
Noise (#90) * Start ChaCha20Poly1305 integration (BearSSL) * Add Curve25519 (BearSSL) required operations for noise * Fix curve mulgen iterate/derive * Fix misleading header * Add chachapoly proper test * Curve25519 integration tests (failing, something is wrong) * Add few converters, finish c25519 integration tests * Remove implicit converters * removed internal globals * Start noise implementation * Fix public() using proper bear mulgen * Noise protocol WIP * Noise progress * Add a quick nim version of HKDF * Converted hkdf to iterator, useful for noise * Noise protocol implementation progress * Noise progress * XX handshake almost there * noise progress * Noise, testing handshake with test vectors * Noise handshake progress, still wrong somewhere! * Noise handshake success! * Full verified noise XX handshake completed * Fix and rewrite test to be similar to switch one * Start with connection upgrade * Switch chachapoly to CT implementations * Improve HKDF implementation * Use a type insted of tuple for HandshakeResult * Remove unnecessary Let * More cosmetic fixes * Properly check randomBytes result * Fix chachapoly signature * Noise full circle (altho dispatcher is nil cursed) * Allow nil aads in chachapoly routines * Noise implementation up to running full test * Use bearssl HKDF as well * Directly use bearssl rng for curve25519 keys * Add a (disabled/no CI) noise interop test server * WIP on fixing interop issues * More fixes in noise implementation for interop * bump chronos requirement (nimble) * Add a chachapoly test for very small size payloads * Noise, more tracing * Add 2 properly working noise tests * Fix payload packing, following the spec properly (and not go version but rather rust) * Sanity, replace discard with asyncCheck * Small fixes and optimization * Use stew endian2 rather then system endian module * Update nimble deps (chronos) * Minor cosmetic/code sanity fixes * Noise, handle Nonce max * Noise tests, make sure to close secured conns * More polish, improve code readability too * More polish and testing again which test fails * Further polishing * Restore noise tests * Remove useless Future[void] * Remove useless CipherState initializer * add a proper read wait future in second noise test * Remove noise generic secure implementation for now * Few fixes to run eth2 sim * Add more debug info in noise traces * Merge size + payload write in sendEncryptedMessage * Revert secure interface, add outgoing property directly in newNoise * remove sendEncrypted and receiveEncrypted * Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
2020-06-03 02:21:11 +00:00
import chronos, stew/byteutils
Noise (#90) * Start ChaCha20Poly1305 integration (BearSSL) * Add Curve25519 (BearSSL) required operations for noise * Fix curve mulgen iterate/derive * Fix misleading header * Add chachapoly proper test * Curve25519 integration tests (failing, something is wrong) * Add few converters, finish c25519 integration tests * Remove implicit converters * removed internal globals * Start noise implementation * Fix public() using proper bear mulgen * Noise protocol WIP * Noise progress * Add a quick nim version of HKDF * Converted hkdf to iterator, useful for noise * Noise protocol implementation progress * Noise progress * XX handshake almost there * noise progress * Noise, testing handshake with test vectors * Noise handshake progress, still wrong somewhere! * Noise handshake success! * Full verified noise XX handshake completed * Fix and rewrite test to be similar to switch one * Start with connection upgrade * Switch chachapoly to CT implementations * Improve HKDF implementation * Use a type insted of tuple for HandshakeResult * Remove unnecessary Let * More cosmetic fixes * Properly check randomBytes result * Fix chachapoly signature * Noise full circle (altho dispatcher is nil cursed) * Allow nil aads in chachapoly routines * Noise implementation up to running full test * Use bearssl HKDF as well * Directly use bearssl rng for curve25519 keys * Add a (disabled/no CI) noise interop test server * WIP on fixing interop issues * More fixes in noise implementation for interop * bump chronos requirement (nimble) * Add a chachapoly test for very small size payloads * Noise, more tracing * Add 2 properly working noise tests * Fix payload packing, following the spec properly (and not go version but rather rust) * Sanity, replace discard with asyncCheck * Small fixes and optimization * Use stew endian2 rather then system endian module * Update nimble deps (chronos) * Minor cosmetic/code sanity fixes * Noise, handle Nonce max * Noise tests, make sure to close secured conns * More polish, improve code readability too * More polish and testing again which test fails * Further polishing * Restore noise tests * Remove useless Future[void] * Remove useless CipherState initializer * add a proper read wait future in second noise test * Remove noise generic secure implementation for now * Few fixes to run eth2 sim * Add more debug info in noise traces * Merge size + payload write in sendEncryptedMessage * Revert secure interface, add outgoing property directly in newNoise * remove sendEncrypted and receiveEncrypted * Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
import chronicles
import ../libp2p/[switch,
errors,
Noise (#90) * Start ChaCha20Poly1305 integration (BearSSL) * Add Curve25519 (BearSSL) required operations for noise * Fix curve mulgen iterate/derive * Fix misleading header * Add chachapoly proper test * Curve25519 integration tests (failing, something is wrong) * Add few converters, finish c25519 integration tests * Remove implicit converters * removed internal globals * Start noise implementation * Fix public() using proper bear mulgen * Noise protocol WIP * Noise progress * Add a quick nim version of HKDF * Converted hkdf to iterator, useful for noise * Noise protocol implementation progress * Noise progress * XX handshake almost there * noise progress * Noise, testing handshake with test vectors * Noise handshake progress, still wrong somewhere! * Noise handshake success! * Full verified noise XX handshake completed * Fix and rewrite test to be similar to switch one * Start with connection upgrade * Switch chachapoly to CT implementations * Improve HKDF implementation * Use a type insted of tuple for HandshakeResult * Remove unnecessary Let * More cosmetic fixes * Properly check randomBytes result * Fix chachapoly signature * Noise full circle (altho dispatcher is nil cursed) * Allow nil aads in chachapoly routines * Noise implementation up to running full test * Use bearssl HKDF as well * Directly use bearssl rng for curve25519 keys * Add a (disabled/no CI) noise interop test server * WIP on fixing interop issues * More fixes in noise implementation for interop * bump chronos requirement (nimble) * Add a chachapoly test for very small size payloads * Noise, more tracing * Add 2 properly working noise tests * Fix payload packing, following the spec properly (and not go version but rather rust) * Sanity, replace discard with asyncCheck * Small fixes and optimization * Use stew endian2 rather then system endian module * Update nimble deps (chronos) * Minor cosmetic/code sanity fixes * Noise, handle Nonce max * Noise tests, make sure to close secured conns * More polish, improve code readability too * More polish and testing again which test fails * Further polishing * Restore noise tests * Remove useless Future[void] * Remove useless CipherState initializer * add a proper read wait future in second noise test * Remove noise generic secure implementation for now * Few fixes to run eth2 sim * Add more debug info in noise traces * Merge size + payload write in sendEncryptedMessage * Revert secure interface, add outgoing property directly in newNoise * remove sendEncrypted and receiveEncrypted * Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
multistream,
stream/bufferstream,
Noise (#90) * Start ChaCha20Poly1305 integration (BearSSL) * Add Curve25519 (BearSSL) required operations for noise * Fix curve mulgen iterate/derive * Fix misleading header * Add chachapoly proper test * Curve25519 integration tests (failing, something is wrong) * Add few converters, finish c25519 integration tests * Remove implicit converters * removed internal globals * Start noise implementation * Fix public() using proper bear mulgen * Noise protocol WIP * Noise progress * Add a quick nim version of HKDF * Converted hkdf to iterator, useful for noise * Noise protocol implementation progress * Noise progress * XX handshake almost there * noise progress * Noise, testing handshake with test vectors * Noise handshake progress, still wrong somewhere! * Noise handshake success! * Full verified noise XX handshake completed * Fix and rewrite test to be similar to switch one * Start with connection upgrade * Switch chachapoly to CT implementations * Improve HKDF implementation * Use a type insted of tuple for HandshakeResult * Remove unnecessary Let * More cosmetic fixes * Properly check randomBytes result * Fix chachapoly signature * Noise full circle (altho dispatcher is nil cursed) * Allow nil aads in chachapoly routines * Noise implementation up to running full test * Use bearssl HKDF as well * Directly use bearssl rng for curve25519 keys * Add a (disabled/no CI) noise interop test server * WIP on fixing interop issues * More fixes in noise implementation for interop * bump chronos requirement (nimble) * Add a chachapoly test for very small size payloads * Noise, more tracing * Add 2 properly working noise tests * Fix payload packing, following the spec properly (and not go version but rather rust) * Sanity, replace discard with asyncCheck * Small fixes and optimization * Use stew endian2 rather then system endian module * Update nimble deps (chronos) * Minor cosmetic/code sanity fixes * Noise, handle Nonce max * Noise tests, make sure to close secured conns * More polish, improve code readability too * More polish and testing again which test fails * Further polishing * Restore noise tests * Remove useless Future[void] * Remove useless CipherState initializer * add a proper read wait future in second noise test * Remove noise generic secure implementation for now * Few fixes to run eth2 sim * Add more debug info in noise traces * Merge size + payload write in sendEncryptedMessage * Revert secure interface, add outgoing property directly in newNoise * remove sendEncrypted and receiveEncrypted * Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
protocols/identify,
stream/connection,
Noise (#90) * Start ChaCha20Poly1305 integration (BearSSL) * Add Curve25519 (BearSSL) required operations for noise * Fix curve mulgen iterate/derive * Fix misleading header * Add chachapoly proper test * Curve25519 integration tests (failing, something is wrong) * Add few converters, finish c25519 integration tests * Remove implicit converters * removed internal globals * Start noise implementation * Fix public() using proper bear mulgen * Noise protocol WIP * Noise progress * Add a quick nim version of HKDF * Converted hkdf to iterator, useful for noise * Noise protocol implementation progress * Noise progress * XX handshake almost there * noise progress * Noise, testing handshake with test vectors * Noise handshake progress, still wrong somewhere! * Noise handshake success! * Full verified noise XX handshake completed * Fix and rewrite test to be similar to switch one * Start with connection upgrade * Switch chachapoly to CT implementations * Improve HKDF implementation * Use a type insted of tuple for HandshakeResult * Remove unnecessary Let * More cosmetic fixes * Properly check randomBytes result * Fix chachapoly signature * Noise full circle (altho dispatcher is nil cursed) * Allow nil aads in chachapoly routines * Noise implementation up to running full test * Use bearssl HKDF as well * Directly use bearssl rng for curve25519 keys * Add a (disabled/no CI) noise interop test server * WIP on fixing interop issues * More fixes in noise implementation for interop * bump chronos requirement (nimble) * Add a chachapoly test for very small size payloads * Noise, more tracing * Add 2 properly working noise tests * Fix payload packing, following the spec properly (and not go version but rather rust) * Sanity, replace discard with asyncCheck * Small fixes and optimization * Use stew endian2 rather then system endian module * Update nimble deps (chronos) * Minor cosmetic/code sanity fixes * Noise, handle Nonce max * Noise tests, make sure to close secured conns * More polish, improve code readability too * More polish and testing again which test fails * Further polishing * Restore noise tests * Remove useless Future[void] * Remove useless CipherState initializer * add a proper read wait future in second noise test * Remove noise generic secure implementation for now * Few fixes to run eth2 sim * Add more debug info in noise traces * Merge size + payload write in sendEncryptedMessage * Revert secure interface, add outgoing property directly in newNoise * remove sendEncrypted and receiveEncrypted * Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
transports/transport,
transports/tcptransport,
multiaddress,
peerinfo,
crypto/crypto,
protocols/protocol,
muxers/muxer,
muxers/mplex/mplex,
protocols/secure/noise,
protocols/secure/secio,
protocols/secure/secure,
upgrademngrs/muxedupgrade,
connmanager]
import ./helpers
Noise (#90) * Start ChaCha20Poly1305 integration (BearSSL) * Add Curve25519 (BearSSL) required operations for noise * Fix curve mulgen iterate/derive * Fix misleading header * Add chachapoly proper test * Curve25519 integration tests (failing, something is wrong) * Add few converters, finish c25519 integration tests * Remove implicit converters * removed internal globals * Start noise implementation * Fix public() using proper bear mulgen * Noise protocol WIP * Noise progress * Add a quick nim version of HKDF * Converted hkdf to iterator, useful for noise * Noise protocol implementation progress * Noise progress * XX handshake almost there * noise progress * Noise, testing handshake with test vectors * Noise handshake progress, still wrong somewhere! * Noise handshake success! * Full verified noise XX handshake completed * Fix and rewrite test to be similar to switch one * Start with connection upgrade * Switch chachapoly to CT implementations * Improve HKDF implementation * Use a type insted of tuple for HandshakeResult * Remove unnecessary Let * More cosmetic fixes * Properly check randomBytes result * Fix chachapoly signature * Noise full circle (altho dispatcher is nil cursed) * Allow nil aads in chachapoly routines * Noise implementation up to running full test * Use bearssl HKDF as well * Directly use bearssl rng for curve25519 keys * Add a (disabled/no CI) noise interop test server * WIP on fixing interop issues * More fixes in noise implementation for interop * bump chronos requirement (nimble) * Add a chachapoly test for very small size payloads * Noise, more tracing * Add 2 properly working noise tests * Fix payload packing, following the spec properly (and not go version but rather rust) * Sanity, replace discard with asyncCheck * Small fixes and optimization * Use stew endian2 rather then system endian module * Update nimble deps (chronos) * Minor cosmetic/code sanity fixes * Noise, handle Nonce max * Noise tests, make sure to close secured conns * More polish, improve code readability too * More polish and testing again which test fails * Further polishing * Restore noise tests * Remove useless Future[void] * Remove useless CipherState initializer * add a proper read wait future in second noise test * Remove noise generic secure implementation for now * Few fixes to run eth2 sim * Add more debug info in noise traces * Merge size + payload write in sendEncryptedMessage * Revert secure interface, add outgoing property directly in newNoise * remove sendEncrypted and receiveEncrypted * Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
const
TestCodec = "/test/proto/1.0.0"
Noise (#90) * Start ChaCha20Poly1305 integration (BearSSL) * Add Curve25519 (BearSSL) required operations for noise * Fix curve mulgen iterate/derive * Fix misleading header * Add chachapoly proper test * Curve25519 integration tests (failing, something is wrong) * Add few converters, finish c25519 integration tests * Remove implicit converters * removed internal globals * Start noise implementation * Fix public() using proper bear mulgen * Noise protocol WIP * Noise progress * Add a quick nim version of HKDF * Converted hkdf to iterator, useful for noise * Noise protocol implementation progress * Noise progress * XX handshake almost there * noise progress * Noise, testing handshake with test vectors * Noise handshake progress, still wrong somewhere! * Noise handshake success! * Full verified noise XX handshake completed * Fix and rewrite test to be similar to switch one * Start with connection upgrade * Switch chachapoly to CT implementations * Improve HKDF implementation * Use a type insted of tuple for HandshakeResult * Remove unnecessary Let * More cosmetic fixes * Properly check randomBytes result * Fix chachapoly signature * Noise full circle (altho dispatcher is nil cursed) * Allow nil aads in chachapoly routines * Noise implementation up to running full test * Use bearssl HKDF as well * Directly use bearssl rng for curve25519 keys * Add a (disabled/no CI) noise interop test server * WIP on fixing interop issues * More fixes in noise implementation for interop * bump chronos requirement (nimble) * Add a chachapoly test for very small size payloads * Noise, more tracing * Add 2 properly working noise tests * Fix payload packing, following the spec properly (and not go version but rather rust) * Sanity, replace discard with asyncCheck * Small fixes and optimization * Use stew endian2 rather then system endian module * Update nimble deps (chronos) * Minor cosmetic/code sanity fixes * Noise, handle Nonce max * Noise tests, make sure to close secured conns * More polish, improve code readability too * More polish and testing again which test fails * Further polishing * Restore noise tests * Remove useless Future[void] * Remove useless CipherState initializer * add a proper read wait future in second noise test * Remove noise generic secure implementation for now * Few fixes to run eth2 sim * Add more debug info in noise traces * Merge size + payload write in sendEncryptedMessage * Revert secure interface, add outgoing property directly in newNoise * remove sendEncrypted and receiveEncrypted * Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
type
TestProto = ref object of LPProtocol
2023-06-07 11:12:49 +00:00
{.push raises: [].}
method init(p: TestProto) {.gcsafe.} =
proc handle(conn: Connection, proto: string) {.async.} =
2020-06-03 02:21:11 +00:00
let msg = string.fromBytes(await conn.readLp(1024))
Noise (#90) * Start ChaCha20Poly1305 integration (BearSSL) * Add Curve25519 (BearSSL) required operations for noise * Fix curve mulgen iterate/derive * Fix misleading header * Add chachapoly proper test * Curve25519 integration tests (failing, something is wrong) * Add few converters, finish c25519 integration tests * Remove implicit converters * removed internal globals * Start noise implementation * Fix public() using proper bear mulgen * Noise protocol WIP * Noise progress * Add a quick nim version of HKDF * Converted hkdf to iterator, useful for noise * Noise protocol implementation progress * Noise progress * XX handshake almost there * noise progress * Noise, testing handshake with test vectors * Noise handshake progress, still wrong somewhere! * Noise handshake success! * Full verified noise XX handshake completed * Fix and rewrite test to be similar to switch one * Start with connection upgrade * Switch chachapoly to CT implementations * Improve HKDF implementation * Use a type insted of tuple for HandshakeResult * Remove unnecessary Let * More cosmetic fixes * Properly check randomBytes result * Fix chachapoly signature * Noise full circle (altho dispatcher is nil cursed) * Allow nil aads in chachapoly routines * Noise implementation up to running full test * Use bearssl HKDF as well * Directly use bearssl rng for curve25519 keys * Add a (disabled/no CI) noise interop test server * WIP on fixing interop issues * More fixes in noise implementation for interop * bump chronos requirement (nimble) * Add a chachapoly test for very small size payloads * Noise, more tracing * Add 2 properly working noise tests * Fix payload packing, following the spec properly (and not go version but rather rust) * Sanity, replace discard with asyncCheck * Small fixes and optimization * Use stew endian2 rather then system endian module * Update nimble deps (chronos) * Minor cosmetic/code sanity fixes * Noise, handle Nonce max * Noise tests, make sure to close secured conns * More polish, improve code readability too * More polish and testing again which test fails * Further polishing * Restore noise tests * Remove useless Future[void] * Remove useless CipherState initializer * add a proper read wait future in second noise test * Remove noise generic secure implementation for now * Few fixes to run eth2 sim * Add more debug info in noise traces * Merge size + payload write in sendEncryptedMessage * Revert secure interface, add outgoing property directly in newNoise * remove sendEncrypted and receiveEncrypted * Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
check "Hello!" == msg
await conn.writeLp("Hello!")
await conn.close()
p.codec = TestCodec
p.handler = handle
{.pop.}
proc createSwitch(ma: MultiAddress; outgoing: bool, secio: bool = false): (Switch, PeerInfo) =
var
privateKey = PrivateKey.random(ECDSA, rng[]).get()
2022-10-20 10:22:28 +00:00
peerInfo = PeerInfo.new(privateKey, @[ma])
Noise (#90) * Start ChaCha20Poly1305 integration (BearSSL) * Add Curve25519 (BearSSL) required operations for noise * Fix curve mulgen iterate/derive * Fix misleading header * Add chachapoly proper test * Curve25519 integration tests (failing, something is wrong) * Add few converters, finish c25519 integration tests * Remove implicit converters * removed internal globals * Start noise implementation * Fix public() using proper bear mulgen * Noise protocol WIP * Noise progress * Add a quick nim version of HKDF * Converted hkdf to iterator, useful for noise * Noise protocol implementation progress * Noise progress * XX handshake almost there * noise progress * Noise, testing handshake with test vectors * Noise handshake progress, still wrong somewhere! * Noise handshake success! * Full verified noise XX handshake completed * Fix and rewrite test to be similar to switch one * Start with connection upgrade * Switch chachapoly to CT implementations * Improve HKDF implementation * Use a type insted of tuple for HandshakeResult * Remove unnecessary Let * More cosmetic fixes * Properly check randomBytes result * Fix chachapoly signature * Noise full circle (altho dispatcher is nil cursed) * Allow nil aads in chachapoly routines * Noise implementation up to running full test * Use bearssl HKDF as well * Directly use bearssl rng for curve25519 keys * Add a (disabled/no CI) noise interop test server * WIP on fixing interop issues * More fixes in noise implementation for interop * bump chronos requirement (nimble) * Add a chachapoly test for very small size payloads * Noise, more tracing * Add 2 properly working noise tests * Fix payload packing, following the spec properly (and not go version but rather rust) * Sanity, replace discard with asyncCheck * Small fixes and optimization * Use stew endian2 rather then system endian module * Update nimble deps (chronos) * Minor cosmetic/code sanity fixes * Noise, handle Nonce max * Noise tests, make sure to close secured conns * More polish, improve code readability too * More polish and testing again which test fails * Further polishing * Restore noise tests * Remove useless Future[void] * Remove useless CipherState initializer * add a proper read wait future in second noise test * Remove noise generic secure implementation for now * Few fixes to run eth2 sim * Add more debug info in noise traces * Merge size + payload write in sendEncryptedMessage * Revert secure interface, add outgoing property directly in newNoise * remove sendEncrypted and receiveEncrypted * Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
proc createMplex(conn: Connection): Muxer =
result = Mplex.new(conn)
Noise (#90) * Start ChaCha20Poly1305 integration (BearSSL) * Add Curve25519 (BearSSL) required operations for noise * Fix curve mulgen iterate/derive * Fix misleading header * Add chachapoly proper test * Curve25519 integration tests (failing, something is wrong) * Add few converters, finish c25519 integration tests * Remove implicit converters * removed internal globals * Start noise implementation * Fix public() using proper bear mulgen * Noise protocol WIP * Noise progress * Add a quick nim version of HKDF * Converted hkdf to iterator, useful for noise * Noise protocol implementation progress * Noise progress * XX handshake almost there * noise progress * Noise, testing handshake with test vectors * Noise handshake progress, still wrong somewhere! * Noise handshake success! * Full verified noise XX handshake completed * Fix and rewrite test to be similar to switch one * Start with connection upgrade * Switch chachapoly to CT implementations * Improve HKDF implementation * Use a type insted of tuple for HandshakeResult * Remove unnecessary Let * More cosmetic fixes * Properly check randomBytes result * Fix chachapoly signature * Noise full circle (altho dispatcher is nil cursed) * Allow nil aads in chachapoly routines * Noise implementation up to running full test * Use bearssl HKDF as well * Directly use bearssl rng for curve25519 keys * Add a (disabled/no CI) noise interop test server * WIP on fixing interop issues * More fixes in noise implementation for interop * bump chronos requirement (nimble) * Add a chachapoly test for very small size payloads * Noise, more tracing * Add 2 properly working noise tests * Fix payload packing, following the spec properly (and not go version but rather rust) * Sanity, replace discard with asyncCheck * Small fixes and optimization * Use stew endian2 rather then system endian module * Update nimble deps (chronos) * Minor cosmetic/code sanity fixes * Noise, handle Nonce max * Noise tests, make sure to close secured conns * More polish, improve code readability too * More polish and testing again which test fails * Further polishing * Restore noise tests * Remove useless Future[void] * Remove useless CipherState initializer * add a proper read wait future in second noise test * Remove noise generic secure implementation for now * Few fixes to run eth2 sim * Add more debug info in noise traces * Merge size + payload write in sendEncryptedMessage * Revert secure interface, add outgoing property directly in newNoise * remove sendEncrypted and receiveEncrypted * Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
let
identify = Identify.new(peerInfo)
2023-03-08 11:30:19 +00:00
peerStore = PeerStore.new(identify)
mplexProvider = MuxerProvider.new(createMplex, MplexCodec)
muxers = @[mplexProvider]
secureManagers = if secio:
[Secure(Secio.new(rng, privateKey))]
else:
[Secure(Noise.new(rng, privateKey, outgoing = outgoing))]
connManager = ConnManager.new()
ms = MultistreamSelect.new()
2023-10-13 12:08:17 +00:00
muxedUpgrade = MuxedUpgrade.new(muxers, secureManagers, ms)
transports = @[Transport(TcpTransport.new(upgrade = muxedUpgrade))]
let switch = newSwitch(
peerInfo,
transports,
secureManagers,
connManager,
2023-03-08 11:30:19 +00:00
ms,
peerStore)
Noise (#90) * Start ChaCha20Poly1305 integration (BearSSL) * Add Curve25519 (BearSSL) required operations for noise * Fix curve mulgen iterate/derive * Fix misleading header * Add chachapoly proper test * Curve25519 integration tests (failing, something is wrong) * Add few converters, finish c25519 integration tests * Remove implicit converters * removed internal globals * Start noise implementation * Fix public() using proper bear mulgen * Noise protocol WIP * Noise progress * Add a quick nim version of HKDF * Converted hkdf to iterator, useful for noise * Noise protocol implementation progress * Noise progress * XX handshake almost there * noise progress * Noise, testing handshake with test vectors * Noise handshake progress, still wrong somewhere! * Noise handshake success! * Full verified noise XX handshake completed * Fix and rewrite test to be similar to switch one * Start with connection upgrade * Switch chachapoly to CT implementations * Improve HKDF implementation * Use a type insted of tuple for HandshakeResult * Remove unnecessary Let * More cosmetic fixes * Properly check randomBytes result * Fix chachapoly signature * Noise full circle (altho dispatcher is nil cursed) * Allow nil aads in chachapoly routines * Noise implementation up to running full test * Use bearssl HKDF as well * Directly use bearssl rng for curve25519 keys * Add a (disabled/no CI) noise interop test server * WIP on fixing interop issues * More fixes in noise implementation for interop * bump chronos requirement (nimble) * Add a chachapoly test for very small size payloads * Noise, more tracing * Add 2 properly working noise tests * Fix payload packing, following the spec properly (and not go version but rather rust) * Sanity, replace discard with asyncCheck * Small fixes and optimization * Use stew endian2 rather then system endian module * Update nimble deps (chronos) * Minor cosmetic/code sanity fixes * Noise, handle Nonce max * Noise tests, make sure to close secured conns * More polish, improve code readability too * More polish and testing again which test fails * Further polishing * Restore noise tests * Remove useless Future[void] * Remove useless CipherState initializer * add a proper read wait future in second noise test * Remove noise generic secure implementation for now * Few fixes to run eth2 sim * Add more debug info in noise traces * Merge size + payload write in sendEncryptedMessage * Revert secure interface, add outgoing property directly in newNoise * remove sendEncrypted and receiveEncrypted * Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
result = (switch, peerInfo)
suite "Noise":
teardown:
checkTrackers()
asyncTest "e2e: handle write + noise":
let
2021-12-16 10:05:20 +00:00
server = @[MultiAddress.init("/ip4/0.0.0.0/tcp/0").tryGet()]
serverPrivKey = PrivateKey.random(ECDSA, rng[]).get()
serverInfo = PeerInfo.new(serverPrivKey, server)
serverNoise = Noise.new(rng, serverPrivKey, outgoing = false)
let transport1: TcpTransport = TcpTransport.new(upgrade = Upgrade())
Remove asynccheck (#590) * Merge master (#555) * Revisit Floodsub (#543) Fixes #525 add coverage to unsubscribeAll and testing * add mounted protos to identify message (#546) * add stable/unstable auto bumps * fix auto-bump CI * merge nbc auto bump with CI in order to bump only on CI success * put conditional locks on nbc bump (#549) * Fix minor exception issues (#550) Makes code compatible with https://github.com/status-im/nim-chronos/pull/166 without requiring it. * fix nimbus ref for auto-bump stable's PR * Split dialer (#542) * extracting dialing logic to dialer * exposing upgrade methods on transport * cleanup * fixing tests to use new interfaces * add comments * add base exception class and fix hierarchy * fix imports * `doAssert` is `ValueError` not `AssertionError`? * revert back to `AssertionError` Co-authored-by: Giovanni Petrantoni <7008900+sinkingsugar@users.noreply.github.com> Co-authored-by: Jacek Sieka <jacek@status.im> * Merge master (#555) * Revisit Floodsub (#543) Fixes #525 add coverage to unsubscribeAll and testing * add mounted protos to identify message (#546) * add stable/unstable auto bumps * fix auto-bump CI * merge nbc auto bump with CI in order to bump only on CI success * put conditional locks on nbc bump (#549) * Fix minor exception issues (#550) Makes code compatible with https://github.com/status-im/nim-chronos/pull/166 without requiring it. * fix nimbus ref for auto-bump stable's PR * Split dialer (#542) * extracting dialing logic to dialer * exposing upgrade methods on transport * cleanup * fixing tests to use new interfaces * add comments * add base exception class and fix hierarchy * fix imports * `doAssert` is `ValueError` not `AssertionError`? * revert back to `AssertionError` Co-authored-by: Giovanni Petrantoni <7008900+sinkingsugar@users.noreply.github.com> Co-authored-by: Jacek Sieka <jacek@status.im> * cleanup Co-authored-by: Giovanni Petrantoni <7008900+sinkingsugar@users.noreply.github.com> Co-authored-by: Jacek Sieka <jacek@status.im>
2021-06-14 23:21:44 +00:00
asyncSpawn transport1.start(server)
proc acceptHandler() {.async.} =
let conn = await transport1.accept()
let sconn = await serverNoise.secure(conn, Opt.none(PeerId))
try:
await sconn.write("Hello!")
finally:
await sconn.close()
await conn.close()
let
acceptFut = acceptHandler()
transport2: TcpTransport = TcpTransport.new(upgrade = Upgrade())
clientPrivKey = PrivateKey.random(ECDSA, rng[]).get()
clientInfo = PeerInfo.new(clientPrivKey, transport1.addrs)
clientNoise = Noise.new(rng, clientPrivKey, outgoing = true)
conn = await transport2.dial(transport1.addrs[0])
let sconn = await clientNoise.secure(conn, Opt.some(serverInfo.peerId))
var msg = newSeq[byte](6)
await sconn.readExactly(addr msg[0], 6)
await sconn.close()
await conn.close()
await acceptFut
await transport1.stop()
await transport2.stop()
check string.fromBytes(msg) == "Hello!"
asyncTest "e2e: handle write + noise (wrong prologue)":
let
2021-12-16 10:05:20 +00:00
server = @[MultiAddress.init("/ip4/0.0.0.0/tcp/0").tryGet()]
serverPrivKey = PrivateKey.random(ECDSA, rng[]).get()
serverInfo = PeerInfo.new(serverPrivKey, server)
serverNoise = Noise.new(rng, serverPrivKey, outgoing = false)
let
transport1: TcpTransport = TcpTransport.new(upgrade = Upgrade())
Remove asynccheck (#590) * Merge master (#555) * Revisit Floodsub (#543) Fixes #525 add coverage to unsubscribeAll and testing * add mounted protos to identify message (#546) * add stable/unstable auto bumps * fix auto-bump CI * merge nbc auto bump with CI in order to bump only on CI success * put conditional locks on nbc bump (#549) * Fix minor exception issues (#550) Makes code compatible with https://github.com/status-im/nim-chronos/pull/166 without requiring it. * fix nimbus ref for auto-bump stable's PR * Split dialer (#542) * extracting dialing logic to dialer * exposing upgrade methods on transport * cleanup * fixing tests to use new interfaces * add comments * add base exception class and fix hierarchy * fix imports * `doAssert` is `ValueError` not `AssertionError`? * revert back to `AssertionError` Co-authored-by: Giovanni Petrantoni <7008900+sinkingsugar@users.noreply.github.com> Co-authored-by: Jacek Sieka <jacek@status.im> * Merge master (#555) * Revisit Floodsub (#543) Fixes #525 add coverage to unsubscribeAll and testing * add mounted protos to identify message (#546) * add stable/unstable auto bumps * fix auto-bump CI * merge nbc auto bump with CI in order to bump only on CI success * put conditional locks on nbc bump (#549) * Fix minor exception issues (#550) Makes code compatible with https://github.com/status-im/nim-chronos/pull/166 without requiring it. * fix nimbus ref for auto-bump stable's PR * Split dialer (#542) * extracting dialing logic to dialer * exposing upgrade methods on transport * cleanup * fixing tests to use new interfaces * add comments * add base exception class and fix hierarchy * fix imports * `doAssert` is `ValueError` not `AssertionError`? * revert back to `AssertionError` Co-authored-by: Giovanni Petrantoni <7008900+sinkingsugar@users.noreply.github.com> Co-authored-by: Jacek Sieka <jacek@status.im> * cleanup Co-authored-by: Giovanni Petrantoni <7008900+sinkingsugar@users.noreply.github.com> Co-authored-by: Jacek Sieka <jacek@status.im>
2021-06-14 23:21:44 +00:00
asyncSpawn transport1.start(server)
proc acceptHandler() {.async.} =
var conn: Connection
try:
conn = await transport1.accept()
discard await serverNoise.secure(conn, Opt.none(PeerId))
except CatchableError:
discard
finally:
await conn.close()
let
handlerWait = acceptHandler()
transport2: TcpTransport = TcpTransport.new(upgrade = Upgrade())
clientPrivKey = PrivateKey.random(ECDSA, rng[]).get()
clientInfo = PeerInfo.new(clientPrivKey, transport1.addrs)
clientNoise = Noise.new(rng, clientPrivKey, outgoing = true, commonPrologue = @[1'u8, 2'u8, 3'u8])
conn = await transport2.dial(transport1.addrs[0])
var sconn: Connection = nil
expect(NoiseDecryptTagError):
sconn = await clientNoise.secure(conn, Opt.some(conn.peerId))
Noise (#90) * Start ChaCha20Poly1305 integration (BearSSL) * Add Curve25519 (BearSSL) required operations for noise * Fix curve mulgen iterate/derive * Fix misleading header * Add chachapoly proper test * Curve25519 integration tests (failing, something is wrong) * Add few converters, finish c25519 integration tests * Remove implicit converters * removed internal globals * Start noise implementation * Fix public() using proper bear mulgen * Noise protocol WIP * Noise progress * Add a quick nim version of HKDF * Converted hkdf to iterator, useful for noise * Noise protocol implementation progress * Noise progress * XX handshake almost there * noise progress * Noise, testing handshake with test vectors * Noise handshake progress, still wrong somewhere! * Noise handshake success! * Full verified noise XX handshake completed * Fix and rewrite test to be similar to switch one * Start with connection upgrade * Switch chachapoly to CT implementations * Improve HKDF implementation * Use a type insted of tuple for HandshakeResult * Remove unnecessary Let * More cosmetic fixes * Properly check randomBytes result * Fix chachapoly signature * Noise full circle (altho dispatcher is nil cursed) * Allow nil aads in chachapoly routines * Noise implementation up to running full test * Use bearssl HKDF as well * Directly use bearssl rng for curve25519 keys * Add a (disabled/no CI) noise interop test server * WIP on fixing interop issues * More fixes in noise implementation for interop * bump chronos requirement (nimble) * Add a chachapoly test for very small size payloads * Noise, more tracing * Add 2 properly working noise tests * Fix payload packing, following the spec properly (and not go version but rather rust) * Sanity, replace discard with asyncCheck * Small fixes and optimization * Use stew endian2 rather then system endian module * Update nimble deps (chronos) * Minor cosmetic/code sanity fixes * Noise, handle Nonce max * Noise tests, make sure to close secured conns * More polish, improve code readability too * More polish and testing again which test fails * Further polishing * Restore noise tests * Remove useless Future[void] * Remove useless CipherState initializer * add a proper read wait future in second noise test * Remove noise generic secure implementation for now * Few fixes to run eth2 sim * Add more debug info in noise traces * Merge size + payload write in sendEncryptedMessage * Revert secure interface, add outgoing property directly in newNoise * remove sendEncrypted and receiveEncrypted * Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
await conn.close()
await handlerWait
await transport1.stop()
await transport2.stop()
asyncTest "e2e: handle read + noise":
let
2021-12-16 10:05:20 +00:00
server = @[MultiAddress.init("/ip4/0.0.0.0/tcp/0").tryGet()]
serverPrivKey = PrivateKey.random(ECDSA, rng[]).get()
serverInfo = PeerInfo.new(serverPrivKey, server)
serverNoise = Noise.new(rng, serverPrivKey, outgoing = false)
readTask = newFuture[void]()
let transport1: TcpTransport = TcpTransport.new(upgrade = Upgrade())
Remove asynccheck (#590) * Merge master (#555) * Revisit Floodsub (#543) Fixes #525 add coverage to unsubscribeAll and testing * add mounted protos to identify message (#546) * add stable/unstable auto bumps * fix auto-bump CI * merge nbc auto bump with CI in order to bump only on CI success * put conditional locks on nbc bump (#549) * Fix minor exception issues (#550) Makes code compatible with https://github.com/status-im/nim-chronos/pull/166 without requiring it. * fix nimbus ref for auto-bump stable's PR * Split dialer (#542) * extracting dialing logic to dialer * exposing upgrade methods on transport * cleanup * fixing tests to use new interfaces * add comments * add base exception class and fix hierarchy * fix imports * `doAssert` is `ValueError` not `AssertionError`? * revert back to `AssertionError` Co-authored-by: Giovanni Petrantoni <7008900+sinkingsugar@users.noreply.github.com> Co-authored-by: Jacek Sieka <jacek@status.im> * Merge master (#555) * Revisit Floodsub (#543) Fixes #525 add coverage to unsubscribeAll and testing * add mounted protos to identify message (#546) * add stable/unstable auto bumps * fix auto-bump CI * merge nbc auto bump with CI in order to bump only on CI success * put conditional locks on nbc bump (#549) * Fix minor exception issues (#550) Makes code compatible with https://github.com/status-im/nim-chronos/pull/166 without requiring it. * fix nimbus ref for auto-bump stable's PR * Split dialer (#542) * extracting dialing logic to dialer * exposing upgrade methods on transport * cleanup * fixing tests to use new interfaces * add comments * add base exception class and fix hierarchy * fix imports * `doAssert` is `ValueError` not `AssertionError`? * revert back to `AssertionError` Co-authored-by: Giovanni Petrantoni <7008900+sinkingsugar@users.noreply.github.com> Co-authored-by: Jacek Sieka <jacek@status.im> * cleanup Co-authored-by: Giovanni Petrantoni <7008900+sinkingsugar@users.noreply.github.com> Co-authored-by: Jacek Sieka <jacek@status.im>
2021-06-14 23:21:44 +00:00
asyncSpawn transport1.start(server)
proc acceptHandler() {.async.} =
let conn = await transport1.accept()
let sconn = await serverNoise.secure(conn, Opt.none(PeerId))
defer:
await sconn.close()
await conn.close()
var msg = newSeq[byte](6)
await sconn.readExactly(addr msg[0], 6)
check string.fromBytes(msg) == "Hello!"
let
acceptFut = acceptHandler()
transport2: TcpTransport = TcpTransport.new(upgrade = Upgrade())
clientPrivKey = PrivateKey.random(ECDSA, rng[]).get()
clientInfo = PeerInfo.new(clientPrivKey, transport1.addrs)
clientNoise = Noise.new(rng, clientPrivKey, outgoing = true)
conn = await transport2.dial(transport1.addrs[0])
let sconn = await clientNoise.secure(conn, Opt.some(serverInfo.peerId))
await sconn.write("Hello!")
await acceptFut
await sconn.close()
await conn.close()
await transport1.stop()
await transport2.stop()
asyncTest "e2e: handle read + noise fragmented":
let
2021-12-16 10:05:20 +00:00
server = @[MultiAddress.init("/ip4/0.0.0.0/tcp/0").tryGet()]
serverPrivKey = PrivateKey.random(ECDSA, rng[]).get()
serverInfo = PeerInfo.new(serverPrivKey, server)
serverNoise = Noise.new(rng, serverPrivKey, outgoing = false)
readTask = newFuture[void]()
var hugePayload = newSeq[byte](0xFFFFF)
hmacDrbgGenerate(rng[], hugePayload)
trace "Sending huge payload", size = hugePayload.len
let
transport1: TcpTransport = TcpTransport.new(upgrade = Upgrade())
listenFut = transport1.start(server)
proc acceptHandler() {.async.} =
let conn = await transport1.accept()
let sconn = await serverNoise.secure(conn, Opt.none(PeerId))
defer:
await sconn.close()
let msg = await sconn.readLp(1024*1024)
check msg == hugePayload
readTask.complete()
let
acceptFut = acceptHandler()
transport2: TcpTransport = TcpTransport.new(upgrade = Upgrade())
clientPrivKey = PrivateKey.random(ECDSA, rng[]).get()
clientInfo = PeerInfo.new(clientPrivKey, transport1.addrs)
clientNoise = Noise.new(rng, clientPrivKey, outgoing = true)
conn = await transport2.dial(transport1.addrs[0])
let sconn = await clientNoise.secure(conn, Opt.some(serverInfo.peerId))
await sconn.writeLp(hugePayload)
await readTask
await sconn.close()
await conn.close()
await acceptFut
await transport2.stop()
await transport1.stop()
await listenFut
asyncTest "e2e use switch dial proto string":
2021-12-16 10:05:20 +00:00
let ma1 = MultiAddress.init("/ip4/0.0.0.0/tcp/0").tryGet()
let ma2 = MultiAddress.init("/ip4/0.0.0.0/tcp/0").tryGet()
var peerInfo1, peerInfo2: PeerInfo
var switch1, switch2: Switch
(switch1, peerInfo1) = createSwitch(ma1, false)
let testProto = new TestProto
testProto.init()
testProto.codec = TestCodec
switch1.mount(testProto)
(switch2, peerInfo2) = createSwitch(ma2, true)
await switch1.start()
await switch2.start()
let conn = await switch2.dial(switch1.peerInfo.peerId, switch1.peerInfo.addrs, TestCodec)
await conn.writeLp("Hello!")
let msg = string.fromBytes(await conn.readLp(1024))
check "Hello!" == msg
await conn.close()
Noise (#90) * Start ChaCha20Poly1305 integration (BearSSL) * Add Curve25519 (BearSSL) required operations for noise * Fix curve mulgen iterate/derive * Fix misleading header * Add chachapoly proper test * Curve25519 integration tests (failing, something is wrong) * Add few converters, finish c25519 integration tests * Remove implicit converters * removed internal globals * Start noise implementation * Fix public() using proper bear mulgen * Noise protocol WIP * Noise progress * Add a quick nim version of HKDF * Converted hkdf to iterator, useful for noise * Noise protocol implementation progress * Noise progress * XX handshake almost there * noise progress * Noise, testing handshake with test vectors * Noise handshake progress, still wrong somewhere! * Noise handshake success! * Full verified noise XX handshake completed * Fix and rewrite test to be similar to switch one * Start with connection upgrade * Switch chachapoly to CT implementations * Improve HKDF implementation * Use a type insted of tuple for HandshakeResult * Remove unnecessary Let * More cosmetic fixes * Properly check randomBytes result * Fix chachapoly signature * Noise full circle (altho dispatcher is nil cursed) * Allow nil aads in chachapoly routines * Noise implementation up to running full test * Use bearssl HKDF as well * Directly use bearssl rng for curve25519 keys * Add a (disabled/no CI) noise interop test server * WIP on fixing interop issues * More fixes in noise implementation for interop * bump chronos requirement (nimble) * Add a chachapoly test for very small size payloads * Noise, more tracing * Add 2 properly working noise tests * Fix payload packing, following the spec properly (and not go version but rather rust) * Sanity, replace discard with asyncCheck * Small fixes and optimization * Use stew endian2 rather then system endian module * Update nimble deps (chronos) * Minor cosmetic/code sanity fixes * Noise, handle Nonce max * Noise tests, make sure to close secured conns * More polish, improve code readability too * More polish and testing again which test fails * Further polishing * Restore noise tests * Remove useless Future[void] * Remove useless CipherState initializer * add a proper read wait future in second noise test * Remove noise generic secure implementation for now * Few fixes to run eth2 sim * Add more debug info in noise traces * Merge size + payload write in sendEncryptedMessage * Revert secure interface, add outgoing property directly in newNoise * remove sendEncrypted and receiveEncrypted * Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
await allFuturesThrowing(
switch1.stop(),
switch2.stop())
asyncTest "e2e test wrong secure negotiation":
2021-12-16 10:05:20 +00:00
let ma1 = MultiAddress.init("/ip4/0.0.0.0/tcp/0").tryGet()
let ma2 = MultiAddress.init("/ip4/0.0.0.0/tcp/0").tryGet()
var peerInfo1, peerInfo2: PeerInfo
var switch1, switch2: Switch
(switch1, peerInfo1) = createSwitch(ma1, false)
let testProto = new TestProto
testProto.init()
testProto.codec = TestCodec
switch1.mount(testProto)
(switch2, peerInfo2) = createSwitch(ma2, true, true) # secio, we want to fail
await switch1.start()
await switch2.start()
2022-09-26 09:03:24 +00:00
expect(DialFailedError):
let conn = await switch2.dial(switch1.peerInfo.peerId, switch1.peerInfo.addrs, TestCodec)
await allFuturesThrowing(
switch1.stop(),
switch2.stop())