RLP Enum deserialization would currently not check if "hole values"
were attempted to be converted to the enum type. Now use
checkedEnumAssign and fail with RlpTypeMismatch on invalid values.
There is at least one occurance of an enum with holes in rlpx p2p:
DisconnectionReason. For this enum the issue could occur.
Also:
- Added enum RLP tests and rlpx p2p disconnect message tests to
test the DisconnectionReason with enum hole value.
- Fixed worse custom DisconnectionReason decoding occurance
in rlpx in waitSingleMsg proc where this issue could occur.
Nim devel brach(1.7.1) introduce gc=orc as default mode.
Because the p2p protocol using unsafe pointer operations
for it's ProtocolInfo and using global variables scattered
around, the orc mistakenly(or maybe correctly) crash the protocol.
* Move NetworkId type to common eth_types
NetworkId is after all a common type and this way it avoid an
application that requires it to also import all devp2p related
network types.
RLP related calls are moved to eth_types_rlp, this means that p2p
protocols that send NetworkId over the wire need to import this
too. Or just common in general.
* Remove # in front of multiline comment end bracket
These seem to be interpreted wrongly by the GitHub code browser.
* Fix stability issues
why:
Handling malformed messages typically raises `RangeError` exceptions
when de-serialising RLP, or decoding message data. This is an
(incomplete) attempt to weed out some out it driven by real live
tests.
remark:
Employing the new `snap` protocol there might be different views on what
the messages really contain (currently specs are more a hint.)
* Update RLP exception handling
* Undo effect-less patch
why:
problem occurred somewhere above the try/catch handler
* Using `checkedEnumAssign()` for RLP enum
* Provide dedicated `DisconnectionReason` enum type RLP reader
why:
Without this reader, the program communicating via RLPX will crash when
receiving out of bound reason codes disconnect message.
Out of bound value assignments to an enum causes a `RangeError`defect
and consequently the program to terminate. This `RangeError` is avoided
here and a `MalformedRlpError` catchable error raised.
* Using default exception type in bespoke `read(DisconnectionReason)`
why:
This should not differ from the default enum parser. The particular
message is different and more targeted, here.
Note: The default RLP parser was not used because `
`array[1,DisconnectionReason]` is currently not properly handled and
should give a siliar error message as a `DisconnectionReason` error.
* De-clutter, custom read() was not needed
Co-authored-by: jordan <jordan@curd.mjh-it.com>
* Handle the decodeAuthMessage error case separatly and log to trace
Garbage data on the TCP port (e.g. from port scanners) would
cause lots of error log messages, so log this to trace and get rid
of a (little) bit of exception usage in the process.
* Remove usage of result var in rlpxAccept and rlpxConnect
* Discv4: Add ENRRequest & ENRResponse msgs to avoid fails on these
Fix#499
These messages are not implemented yet however, but just ignored.
why:
Rlp errors throw exceptions which cause the dispatcher loop to
terminate the current session immediately.
details:
The DisconnectionReasonList message requires a single entry list.
Observed and now accepted deviations are:
Geth: single byte number
bor(a Geth fork): blobbed single entry list containing a number
why:
This is a legacy feature and its usage should peter out over time.
details:
Use -d:chunked_rlpx_enabled for enabling chunked RLPx message handling.
why:
For some reason, Nethermind insists on sending chunked messages to
the syncing peer. Unfortunately, for the test networks the Nethermind
modes are the importent ones as they speak eth/65 as well while others
like Geth only support eth/66 which is not implemented here, yet.
Currently only setting `--styleCheck:hint` as there are some
dependency fixes required and the compiler seems to trip over the
findnode MessageKind, findnode Message field and the findNode
proc. Also over protocol.Protocol usage.
Closes [nimbus-eth1#767](https://github.com/status-im/nimbus-eth1/issues/767).
Crashes occur when certain invalid RLPx messages are received from a peer.
Specifically, `msgId` out of range. Because any peer can easily trigger this
crash, we'd consider it a DOS vulnerability if Nimbus-eth1 was in general use.
We noticed when syncing to Goerli, there were some rare crashes with this
exception. It turned out one peer with custom code, perhaps malfunctioning,
was sending these messages if we were unlucky enough to connect to it.
`invokeThunk` is called from `dispatchMessages` and checks the range of
`msgId`. It correctly recognise that it's out of range, raises and exception
and produces a message. Job done.
Except the code in `dispatchMessage` treats all that as a warning instead of
error, and continues to process the message. A bit lower down, `msgId` is used
again without a range check.
The trivial fix is to check array bounds before access.
--
ps. Here's the stack trace ("reraised" sections hidden):
```
WRN 2021-11-08 21:29:33.238+00:00 Error while handling RLPx message topics="rlpx" tid=2003472 file=rlpx.nim:607 peer=Node[<IP>:45456] msg=45 err="RLPx message with an invalid id 45 on a connection supporting eth,snap"
/home/jamie/Status/nimbus-eth1/nimbus/p2p/chain/chain_desc.nim(437) main
/home/jamie/Status/nimbus-eth1/nimbus/p2p/chain/chain_desc.nim(430) NimMain
/home/jamie/Status/nimbus-eth1/nimbus/nimbus.nim(258) process
/home/jamie/Status/nimbus-eth1/vendor/nim-chronos/chronos/asyncloop.nim(279) poll
/home/jamie/Status/nimbus-eth1/vendor/nim-chronos/chronos/asyncmacro2.nim(74) colonanonymous
/home/jamie/Status/nimbus-eth1/vendor/nim-eth/eth/p2p/rlpx.nim(1218) rlpxAccept
/home/jamie/Status/nimbus-eth1/vendor/nim-chronos/chronos/asyncmacro2.nim(101) postHelloSteps
/home/jamie/Status/nimbus-eth1/vendor/nim-chronos/chronos/asyncmacro2.nim(74) colonanonymous
/home/jamie/Status/nimbus-eth1/vendor/nim-eth/eth/p2p/rlpx.nim(985) postHelloSteps
/home/jamie/Status/nimbus-eth1/vendor/nim-chronos/chronos/asyncmacro2.nim(101) dispatchMessages
/home/jamie/Status/nimbus-eth1/vendor/nim-chronos/chronos/asyncmacro2.nim(77) colonanonymous
/home/jamie/Status/nimbus-eth1/vendor/nim-eth/eth/p2p/rlpx.nim(614) dispatchMessages
/home/jamie/Status/nimbus-eth1/vendor/nimbus-build-system/vendor/Nim/lib/system/chcks.nim(23) raiseIndexError2
/home/jamie/Status/nimbus-eth1/vendor/nimbus-build-system/vendor/Nim/lib/system/fatal.nim(49) sysFatal
[[reraised from: ... ]]
[[reraised from: ... ]]
[[reraised from: ... ]]
[[reraised from: ... ]]
Error: unhandled exception: index 45 not in 0 .. 40 [IndexError]
```
Signed-off-by: Jamie Lokier <jamie@shareable.org>
Don't treat 3 characters as special in `cmp`. `cmp` for `ProtocolInfo` was
wrong because it ignored all characters after the first 3.
In the wild we have seen protocol names longer than 3 characters. `snap`,
`hive`, `istanbul`, `bzzeth`, `bzz-stream`, `bzz-retrieve`, `dbix`, `opera`,
`pchain`, `pchain_child_0`, `sero`, `smilobft`, `spock`.
There was never a 3 character limit in the [specification]
(https://github.com/ethereum/devp2p/blob/master/rlpx.md).
It always said "short ASCII name", until recently on 2021-02-25 it was changed
to an 8 characters limit.
Also `pi.nameStr` can be removed. Nothing uses it, and it has the same actual
effect as just copying the string `pi.name`.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
* Add build_dcli target and add it to CI
* Fix local imports for dcli
* And use local imports for all other files too
* Use local imports in tests and rlpx protocols
* use bearssl rng throughout
* seeder can fail
* imports and exports
* modules, sigh
* one more try
* move var
* even fewer thread vars
* remove out-of-date genrated files
* simplify some modules
* mark several modules with raises
* fix clearing of keys in auth.nim
* fix keyfile case dropping off
* fix keyfile stream storage
* uuid should be output in lowercase
* enode: simplify API
Kim De Mey
Lorenzo Delgado
Justin Traglia
andri lim
Jacek Sieka
Jordan Hrycaj
Jordan Hrycaj
Jamie Lokier
Zahary Karadjov
Ștefan Talpalaru