* Refactor tests and move socket to separate file
* Move sockets handling to separate class
* Abstract over underlying transport
* Fix bug with receiving duplicated SYN packet
* Fix race condition in connect
* Modify outbuffer
Each element of outbuffer keeps encoded packet ,number
of transmissions of givern packet and information if
given packet needs to be re-send.
* Add initial handling of timeouts
* Add tests for syn re-sends
Currently, `ElemType` can only be called on `List` types when they are
first assigned to a variable called `T`. The template has been adjusted
so that different variable names may be used. The template can now also
be applied to in-line computed types, e.g., `ElemType(typeof(x))`.
There was a cyrillic T in some big-endian specific code that broke the
compilation on such platforms. This replaces that T with an ASCII T to
fix the build.
* Don't fail ENR decoding when value is an RLP list
* Store RLP raw list in the ENR field pair instead
* Add ENR kList FieldKind so lists can be treated differently
Treated differently now when printing out the ENR, mentioning
that it is a raw RLP list
* Add initial handling of acks
Add implemetaion of circular buffer based on reference implementation
Add way to test number of packet in flight
Add acking of initial syn packet
* Allow for tcp/udp ports to always be configured
- Allow for an ENR to be build with tcp and udp ports also when
no IP address is provided
- In the address set-up always provide best efforttcp and udp ports
also when configuration of external ip (and/or ports) fails.
* Add initial impl of utp over udp
* Add more comments
* Add licenses and push declarations
* Add tests to nimble task
* Pr comments
Use better random generator
Raise assert error in case of buffer io exception
* Modify nodes verification
* Move nodes verification to separate module
By moving verification to separate module it can be re-used
in different contexts not only in discoveryv5.
The new sync code wants to start without waiting. We can `discard` the async
result but there is no need for a background task polling and running a timer
for no clear benefit.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
Don't treat 3 characters as special in `cmp`. `cmp` for `ProtocolInfo` was
wrong because it ignored all characters after the first 3.
In the wild we have seen protocol names longer than 3 characters. `snap`,
`hive`, `istanbul`, `bzzeth`, `bzz-stream`, `bzz-retrieve`, `dbix`, `opera`,
`pchain`, `pchain_child_0`, `sero`, `smilobft`, `spock`.
There was never a 3 character limit in the [specification]
(https://github.com/ethereum/devp2p/blob/master/rlpx.md).
It always said "short ASCII name", until recently on 2021-02-25 it was changed
to an 8 characters limit.
Also `pi.nameStr` can be removed. Nothing uses it, and it has the same actual
effect as just copying the string `pi.name`.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
For a long time this caused invalid RLP parsing of `NewBlock` messages in the
`eth` protocol.
The `rlpInline` pragma was accepted but had no effect. We could implemented
it, but it doesn't seem worth doing, with tests etc, as there's only one user
which has been fixed another way.
With `NewBlock`, whenever a peer sent us `NewBlock`, we'd get an RLP decoding
error, and disconnected the peer thinking it was the peer's error.
These messages are sent often by good peers, so whenever we connected to a
really good peer, we'd end up disconnecting within a minute due to this. This
went unnoticed for years, as we stayed connected to old peers which have no new
blocks, and we weren't looking at peer quality, disconnect reasons or real-time
blockchain updates anyway.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
1. Generalises the special cases for serialising RLP `seq[Transaction]`.
Previously it only used the special case inside `BlockBody` and `EthBlock`.
Now it uses it for all `seq[Transaction]` regardless of what objects they
are parts of, or no object at all. `openArray[Transaction]` is also
included, as this was found to be necessary to match in some places.
2. Bug fix parsing `Transaction`: Always read the first byte to get the
transaction type instead of parsing an RLP `int`. This way invalid or
adversarial input gives a correct error (i.e. invalid type code).
When it was read with `rlp.read(int)`, those inputs gave many crazy
messages (e.g. "too large to fit in memory"). In the specification it's a
byte. (Technically the input is not RLP and we shouldn't be using the RLP
parser anyway to parse standalone transaction objects).
3. Bug fix parsing `Transaction`: If a typed transaction is detected in
`seq[Transaction]`, the previous code removed the RLP (blob) wrapper, then
passed the contents to `read(Transaction)`. That meant a blob-wrapped
legacy transaction would be accepted. This is incorrect. The new code
passes the contents to the typed transaction decoder, which correctly
rejects a wrapped legacy transaction as having invalid type.
Change 1 has a large, practical effect on `eth/65` syncing with peers.
Serialisation of `eth` message types `Transactions` and `PooledTransactions`
have been broken since the introduction of typed transactions (EIP-2718), as
used in Berlin/London forks. (The special case for `seq[Transaction]` inside
`BlockBody` only fixed message type `BlockBodies`.)
Due to this, whenever a peer sent us a `Transactions` message, we had an RLP
decoding error processing it, and disconnected the peer thinking it was the
peer's error.
These messages are sent often by good peers, so whenever we connected to a
really good peer, we'd end up disconnecting from it within a few tens of
seconds due to this.
This didn't get noticed before updating to `eth/65`, because with old protocols
we tend to only connect to old peers, which may be out of date themselves and
have no typed transactions. Also, we didn't really investigate occasional
disconnects before, we assumed they're just part of P2P life.
The root cause is the RLP serialisation of individual `Transaction` is meant to
be subtly different from arrays/sequences of `Transaction` objects in network
messages. RFC-2976 covers this but it's quite subtle:
- Individual transactions are encoded and stored as either `RLP([fields..])`
for legacy transactions, or `Type || RLP([fields..])`. Both of these
encodings are byte sequences. The part after `Type` doesn't have to be
RLP in theory, but all types so far use RLP. EIP-2718 covers this.
- In arrays (sequences), transactions are encoded as either `RLP([fields..])`
for legacy transactions, or `RLP(Type || RLP([fields..]))` for all typed
transactions to date. Spot the extra `RLP(..)` blob encoding, to make it
valid RLP inside a larger RLP. EIP-2976 covers this, "Typed Transactions
over Gossip", although it's not very clear about the blob encoding.
In practice the extra `RLP(..)` applies to all arrays/sequences of transactions
that are to be RLP-encoded as a list. In principle, it should be all
aggregates (object fields etc.), but it's enough for us to enable it for all
arrays/sequences, as this is what's used in the protocol and EIP-2976.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
Storing large blobs in a "WITHOUT ROWID" table turns out to be extremely
slow when the tree must be rebalanced.
* Split out keystore capability into separate interface, making each
keystore a separate instance
* Disable "WITHOUT ROWID" optimization by default
* Implement prefix lookup that allows iterating over all values with a
certain prefix in their key
* Fix raw Exceptions in hexary caused by forward declarations
* Fix raw Exceptions in trie/db caused by forward declarations
* And now we can remove those db Proc CatchableError raises
`les_protocol.nim` failed to build, due to very silly Nim bugs
nim-lang/Nim#8792 and nim-lang/Nim#17102.
import
../../[rlp, keys], ../../common/eth_types,
../[rlpx, kademlia, blockchain_utils], ../private/p2p_types,
The silly part is `../` has to be quoted if it's before a group of files, but
not before a single file. Most places in PR #344 / 7624153 use the workaround
`".."/` but it was missed in `les_protocol.nim`:
nimbus-eth1/vendor/nim-eth/eth/p2p/rlpx_protocols/les_protocol.nim(14, 3)
Error: cannot open file: ../../[rlp,keys]
Signed-off-by: Jamie Lokier <jamie@shareable.org>
* Add build_dcli target and add it to CI
* Fix local imports for dcli
* And use local imports for all other files too
* Use local imports in tests and rlpx protocols
Fixesstatus-im/nim-eth#341, status-im/nimbus-eth1#489.
When using discv4 (Kademlia) to find peers, there is a crash after a few
minutes. It occurs for most of us on Eth1 mainnet, and everyone on Ropsten.
The cause is `findNodes` being called twice in succession to the same peer,
within about 5 seconds of each other. ("About" 5 seconds, because Chronos does
not guarantee to run the timeout branch at a particular time, due to queuing
and clock reading delays.)
Then `findNodes` sends a duplicate message to the peer and calls
`waitNeighbours` to listen for the reply. There's already a `waitNeighbours`
callback in a shared table, so that function hits an assert failure.
Ignoring the assert would be wrong as it would break timeout logic, and sending
`FindNodes` twice in rapid succession also makes us a bad peer.
As a simple workaround, just skip `findNodes` in this state and return a fake
empty `Neighbours` reply. This is a bit of a hack as `findNodes` should not be
called like this; there's a logic error at a higher level. But it works.
Tested for about 4 days constant operation on Ropsten. The crash which occured
every few minutes no longer occurs, and discv4 keeps working.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
* Add search for best route and refactor setupNat to setupAddress
* Update setupAddress and make enr ports in discovery optional
* Add specific error log when no route is found
* Use bindIP if it is public
* Adjust some log levels
Zahary Karadjov
KonradStaniec
Etan Kissling
Kim De Mey
Jamie Lokier
Ștefan Talpalaru
jangko
Jacek Sieka