Commit Graph

571 Commits

Author SHA1 Message Date
Jamie Lokier 0f3bb61678
Fix import syntax error in `les_protocol.nim` added by PR #344
`les_protocol.nim` failed to build, due to very silly Nim bugs
nim-lang/Nim#8792 and nim-lang/Nim#17102.

    import
      ../../[rlp, keys], ../../common/eth_types,
      ../[rlpx, kademlia, blockchain_utils], ../private/p2p_types,

The silly part is `../` has to be quoted if it's before a group of files, but
not before a single file.  Most places in PR #344 / 7624153 use the workaround
`".."/` but it was missed in `les_protocol.nim`:

    nimbus-eth1/vendor/nim-eth/eth/p2p/rlpx_protocols/les_protocol.nim(14, 3)
        Error: cannot open file: ../../[rlp,keys]

Signed-off-by: Jamie Lokier <jamie@shareable.org>
2021-04-07 18:07:00 +01:00
Jamie Lokier a48687d277
discv4: Add test associated with fix to Kademlia crash (#341)
It's been confirmed that the test fails if the Kademlia crash workaround isn't
in `findNode`, and passes with it there.

Signed-off-by: Jamie Lokier <jamie@shareable.org>
2021-04-06 18:46:32 +01:00
Jamie Lokier 209171d97d
discv4: Refactor findNode so it can be called directly from a test
Signed-off-by: Jamie Lokier <jamie@shareable.org>
2021-04-06 18:41:47 +01:00
Kim De Mey 762415319c
Add build_dcli target and add it to CI (#344)
* Add build_dcli target and add it to CI

* Fix local imports for dcli

* And use local imports for all other files too

* Use local imports in tests and rlpx protocols
2021-04-06 13:33:24 +02:00
Jamie Lokier e4b4b7f4af
discv4: Fix Kademlia crash when trying to sync (#342)
Fixes status-im/nim-eth#341, status-im/nimbus-eth1#489.

When using discv4 (Kademlia) to find peers, there is a crash after a few
minutes.  It occurs for most of us on Eth1 mainnet, and everyone on Ropsten.

The cause is `findNodes` being called twice in succession to the same peer,
within about 5 seconds of each other.  ("About" 5 seconds, because Chronos does
not guarantee to run the timeout branch at a particular time, due to queuing
and clock reading delays.)

Then `findNodes` sends a duplicate message to the peer and calls
`waitNeighbours` to listen for the reply.  There's already a `waitNeighbours`
callback in a shared table, so that function hits an assert failure.

Ignoring the assert would be wrong as it would break timeout logic, and sending
`FindNodes` twice in rapid succession also makes us a bad peer.

As a simple workaround, just skip `findNodes` in this state and return a fake
empty `Neighbours` reply.  This is a bit of a hack as `findNodes` should not be
called like this; there's a logic error at a higher level.  But it works.

Tested for about 4 days constant operation on Ropsten.  The crash which occured
every few minutes no longer occurs, and discv4 keeps working.

Signed-off-by: Jamie Lokier <jamie@shareable.org>
2021-04-02 23:29:02 +02:00
Kim De Mey c5dace27ca
Use chronos http server for dcli metrics and remove insecure compile flag (#343)
And add cfg file to default have runtime log filtering on
2021-04-02 17:29:38 +02:00
Kim De Mey 207b783253
Nimble file cleanup and group discv5 tests to compile once (#340) 2021-03-29 15:26:34 +02:00
Kim De Mey ae4177851f
Remove no longer needed try/except (#339) 2021-03-26 17:49:03 +01:00
Kim De Mey ac8aa0e037
Run discv5 tests with chronosStrictException on (#338) 2021-03-26 15:20:03 +01:00
Jacek Sieka 698b3bea88
Exception tracking (#334)
* Exception tracking

https://github.com/status-im/nim-chronos/pull/166

* Remove redundant raises annotation

Co-authored-by: kdeme <kim.demey@gmail.com>
2021-03-25 18:12:11 +01:00
Kim De Mey 8c27f291f5
Add raises annotation to the FilterMsgHandler proc type (#337) 2021-03-25 15:06:12 +01:00
Kim De Mey 0be863d2de
Add raises annotations to make exception tracking work (#336)
See https://github.com/status-im/nim-chronos/pull/166
2021-03-24 12:52:09 +01:00
Jacek Sieka 16802c0e52
Fix minor exception effect issues (#335)
Makes code compatible with
https://github.com/status-im/nim-chronos/pull/166 without requiring it.
2021-03-23 07:47:55 +01:00
Kim De Mey be5e088b21
Move parsing of nat cli option out of setupAddress (#331)
* Move parsing of nat cli option out of setupAddress

* Change some proc to func
2021-03-05 21:23:54 +01:00
Kim De Mey 0700ec770f
Improve network address discovery / NAT setup (#323)
* Add search for best route and refactor setupNat to setupAddress

* Update setupAddress and make enr ports in discovery optional

* Add specific error log when no route is found
* Use bindIP if it is public
* Adjust some log levels
2021-03-02 17:13:29 +01:00
Kim De Mey e8fbd3a83e
Add github actions timeout of 60 minutes (#328) 2021-02-17 15:43:05 +01:00
Kim De Mey be92a68d4c
Update discv5.md
Update some documentation in the discv5 docs.
2021-02-16 11:44:03 +01:00
jangko dda2bec8aa turn networkId into distinct uint 2021-02-13 17:43:17 +07:00
Zahary Karadjov e8c9691b35
awaitWithTimeout for Future[void] 2021-02-04 16:45:50 +02:00
Kim De Mey a339944bcf
Some discv5 cleanup / refactor (#326)
* Use Address in HandshakeKey

* Refactor + comments + dcli use queryRandom

* Rename types.nim to messages.nim
2021-02-02 22:47:21 +01:00
kdeme 4e58eb48ce Add comments on enrAutoUpdate and add metric 2021-02-01 20:30:55 +02:00
kdeme bfbad64d83 Add update of ENR on newly discovered address 2021-02-01 20:30:55 +02:00
kdeme 689eef2c11 Move IpAddress into the pong message 2021-02-01 20:30:55 +02:00
kdeme d33d27c2ee Small improvements and cleanup 2021-02-01 20:30:55 +02:00
kdeme e43ee6ef9c Add ip address voting through pong responses 2021-02-01 20:30:55 +02:00
Jacek Sieka 51a8795e56
one upnp is enough (#324)
we shouldn't have to recreate the upnp interface every time
2021-01-26 14:12:04 +01:00
Kim De Mey ab969f72c1
Update discv5.md 2021-01-14 09:26:19 +01:00
Kim De Mey e25500c9f0
Merge pull request #322 from status-im/refresh-only
Only do discovery queries to refresh the table
2021-01-13 22:40:35 +01:00
kdeme 181bbadcbc
Add more message related metrics 2021-01-13 21:44:17 +01:00
kdeme aa7442c9ff
dcli: actually use the provided listen address 2021-01-11 15:01:02 +01:00
kdeme 9cedbc0cc8 Move code into seedTable and populateTable proc 2021-01-07 10:20:40 +01:00
kdeme ac58a1f35c Only do discovery queries to refresh the table 2021-01-07 10:20:40 +01:00
andri lim 8de6bd4f48
Merge pull request #321 from status-im/github_action
add github action
2021-01-06 17:31:39 +07:00
jangko f50a68a992
add github action 2021-01-05 18:54:53 +07:00
Jacek Sieka 0f48ccecc0 sqlite: manual checkpointing 2020-12-18 19:30:53 +02:00
Kim De Mey a945eacfd3
Merge pull request #318 from status-im/lookup-adjust
Fix lookup to sort and query closest nodes
2020-12-18 14:24:50 +01:00
kdeme 12ec608efd
Put a limit on the nodes returned on a findnode request 2020-12-17 17:06:42 +01:00
kdeme 21423fca42
Use of discv5.1 findnode request with multiple distances 2020-12-17 15:42:04 +01:00
kdeme a506739b23
Add query proc and use this for recurrent queries
This query proc is similar to the original (faulty) lookup proc.
But as we don't need to look for specific targets, it can be
used still as it gives a quicker and broader search resulting
in more nodes.
2020-12-17 15:23:02 +01:00
kdeme e1acc1ae2d
Avoid sending more requests to node that timed out + request metrics 2020-12-16 00:07:49 +01:00
kdeme 68c9b7b3ad
Fix lookup to sort and query closest nodes 2020-12-15 13:24:57 +01:00
Kim De Mey 0820dbba46
Use one instead of deprecated oneIndex (#317) 2020-12-15 12:41:53 +01:00
Kim De Mey d024ea8e85
Change invalid distance warning to debug (#316)
And also:

* move connected_peers metric so it does get added where it
shouldn't.

* imports cleanup
2020-12-14 12:21:03 +01:00
Mamy Ratsimbazafy 3b15abab10 Address review comment 2020-11-29 11:00:09 +02:00
Mamy André-Ratsimbazafy 482ea988c0 Add support for array[N, byte] in SQLite queries 2020-11-29 11:00:09 +02:00
Zahary Karadjov 49c40c9b95
Restore a commit accidentally omitted from a merged branch 2020-11-27 20:49:08 +02:00
Kim De Mey b4c1391be9
Discv5 ip limits for routing table (#308)
* Add ip limits to routing table and routing table buckets

* Fix order of ip limit check and duplicate check for replacement

* Fix ip limit for node with updated ip in ENR

* Fix bug where address wouldn't update on ENR update

and update some comments

* Reuse some add/remove code in routing table

* Fix seen bug on ENR update in routing table

* Rework addNode to make sure to do address check always

and adjust some logs.

* More documentation on the ip limits in routing table [skip ci]
2020-11-26 18:20:15 +01:00
Kim De Mey b88fef203b
Add info log line in case of no external IP (#313) 2020-11-26 18:19:13 +01:00
Jacek Sieka 114680453f
wait for cancellation to be processed on timeout (#311) 2020-11-17 15:36:41 +01:00
Kim De Mey bc8a8947fc
Merge pull request #310 from status-im/remove-discv5.0
Remove support for discv5.0
2020-11-13 15:08:34 +01:00