diff --git a/eth/p2p/p2p_protocol_dsl.nim b/eth/p2p/p2p_protocol_dsl.nim index 6c2c88b..aae1347 100644 --- a/eth/p2p/p2p_protocol_dsl.nim +++ b/eth/p2p/p2p_protocol_dsl.nim @@ -1,7 +1,30 @@ +# nim-eth +# Copyright (c) 2018-2024 Status Research & Development GmbH +# Licensed and distributed under either of +# * MIT license (license terms in the root directory or at +# https://opensource.org/licenses/MIT). +# * Apache v2 license (license terms in the root directory or at +# https://www.apache.org/licenses/LICENSE-2.0). +# at your option. This file may not be copied, modified, or distributed except +# according to those terms. + +## This module defines a DSL for constructing communication message packet +## drivers to support the ones as defined with the Ethereum p2p protocols +## (see `devp2p `_.) +## +## Particular restictions apply to intrinsic message entities as message +## ID and request/response ID. Both must be unsigned. This is a consequence +## of message packets being serialised using RLP which is defined for +## non-negative scalar values only, see +## `Yellow Paper `_, +## Appx B, clauses (195) ff. and (199).) + + {.push raises: [].} import std/[options, sequtils, macrocache], + results, stew/shims/macros, chronos, faststreams/outputs type @@ -12,7 +35,7 @@ type msgResponse Message* = ref object - id*: int + id*: Opt[uint] ident*: NimNode kind*: MessageKind procDef*: NimNode @@ -126,7 +149,7 @@ let # Variable names affecting the public interface of the library: reqIdVar* {.compileTime.} = ident "reqId" # XXX: Binding the int type causes instantiation failure for some reason - ReqIdType* {.compileTime.} = ident "int" + ReqIdType* {.compileTime.} = ident "uint" peerVar* {.compileTime.} = ident "peer" responseVar* {.compileTime.} = ident "response" streamVar* {.compileTime.} = ident "stream" @@ -322,14 +345,14 @@ proc init*(T: type P2PProtocol, backendFactory: BackendFactory, assert(not result.backend.implementProtocolInit.isNil) if result.backend.ReqIdType.isNil: - result.backend.ReqIdType = ident "int" + result.backend.ReqIdType = ident "uint" result.processProtocolBody body if not result.backend.afterProtocolInit.isNil: result.backend.afterProtocolInit(result) -proc augmentUserHandler(p: P2PProtocol, userHandlerProc: NimNode, msgId = -1) = +proc augmentUserHandler(p: P2PProtocol, userHandlerProc: NimNode, msgId = Opt.none(uint)) = ## This procs adds a set of common helpers available in all messages handlers ## (e.g. `perProtocolMsgId`, `peer.state`, etc). @@ -363,7 +386,8 @@ proc augmentUserHandler(p: P2PProtocol, userHandlerProc: NimNode, msgId = -1) = prelude.add quote do: type `currentProtocolSym` {.used.} = `protocolNameIdent` - if msgId >= 0 and p.isRlpx: + if msgId.isSome and p.isRlpx: + let msgId = msgId.value prelude.add quote do: const `perProtocolMsgIdVar` {.used.} = `msgId` @@ -422,7 +446,7 @@ proc ResponderType(msg: Message): NimNode = proc needsSingleParamInlining(msg: Message): bool = msg.recBody.kind == nnkDistinctTy -proc newMsg(protocol: P2PProtocol, kind: MessageKind, id: int, +proc newMsg(protocol: P2PProtocol, kind: MessageKind, msgId: uint, procDef: NimNode, response: Message = nil): Message = if procDef[0].kind == nnkPostfix: @@ -454,7 +478,7 @@ proc newMsg(protocol: P2PProtocol, kind: MessageKind, id: int, recBody = newTree(nnkDistinctTy, recName) result = Message(protocol: protocol, - id: id, + id: Opt.some(msgId), ident: msgIdent, kind: kind, procDef: procDef, @@ -466,7 +490,7 @@ proc newMsg(protocol: P2PProtocol, kind: MessageKind, id: int, if procDef.body.kind != nnkEmpty: var userHandler = copy procDef - protocol.augmentUserHandler userHandler, id + protocol.augmentUserHandler userHandler, Opt.some(msgId) userHandler.name = ident(msgName & "UserHandler") # Request and Response handlers get an extra `reqId` parameter if the @@ -504,7 +528,7 @@ proc newMsg(protocol: P2PProtocol, kind: MessageKind, id: int, proc isVoid(t: NimNode): bool = t.kind == nnkEmpty or eqIdent(t, "void") -proc addMsg(p: P2PProtocol, id: int, procDef: NimNode) = +proc addMsg(p: P2PProtocol, msgId: uint, procDef: NimNode) = var returnType = procDef.params[0] hasReturnValue = not isVoid(returnType) @@ -520,7 +544,7 @@ proc addMsg(p: P2PProtocol, id: int, procDef: NimNode) = let responseIdent = ident($procDef.name & "Response") response = Message(protocol: p, - id: -1, # TODO: Implement the message IDs in RLPx-specific way + id: Opt.none(uint), ident: responseIdent, kind: msgResponse, recName: returnType, @@ -529,10 +553,10 @@ proc addMsg(p: P2PProtocol, id: int, procDef: NimNode) = outputParamDef: outputParam) p.messages.add response - let msg = p.newMsg(msgRequest, id, procDef, response = response) + let msg = p.newMsg(msgRequest, msgId, procDef, response = response) p.requests.add Request(queries: @[msg], response: response) else: - p.notifications.add p.newMsg(msgNotification, id, procDef) + p.notifications.add p.newMsg(msgNotification, msgId, procDef) proc identWithExportMarker*(msg: Message): NimNode = newTree(nnkPostfix, ident("*"), msg.ident) @@ -847,7 +871,7 @@ proc processProtocolBody*(p: P2PProtocol, protocolBody: NimNode) = ## ## All messages will have properly computed numeric IDs ## - var nextId = 0 + var nextId = 0u for n in protocolBody: case n.kind @@ -856,7 +880,7 @@ proc processProtocolBody*(p: P2PProtocol, protocolBody: NimNode) = # By default message IDs are assigned in increasing order # `nextID` can be used to skip some of the numeric slots if n.len == 2 and n[1].kind == nnkIntLit: - nextId = n[1].intVal.int + nextId = n[1].intVal.uint else: error("nextID expects a single int value", n) @@ -871,10 +895,10 @@ proc processProtocolBody*(p: P2PProtocol, protocolBody: NimNode) = error "requestResponse expects a block with at least two proc definitions" var queries = newSeq[Message]() - let responseMsg = p.newMsg(msgResponse, nextId + procs.len - 1, procs[^1]) + let responseMsg = p.newMsg(msgResponse, nextId + procs.len.uint - 1, procs[^1]) for i in 0 .. procs.len - 2: - queries.add p.newMsg(msgRequest, nextId + i, procs[i], response = responseMsg) + queries.add p.newMsg(msgRequest, nextId + i.uint, procs[i], response = responseMsg) p.requests.add Request(queries: queries, response: responseMsg) @@ -942,8 +966,11 @@ proc genTypeSection*(p: P2PProtocol): NimNode = if msg.procDef == nil: continue + # FIXME: Can `msg.id` be missing, at all? + doAssert msg.id.isSome() + let - msgId = msg.id + msgId = msg.id.value msgName = msg.ident msgRecName = msg.recName msgStrongRecName = msg.strongRecName @@ -964,7 +991,7 @@ proc genTypeSection*(p: P2PProtocol): NimNode = if p.isRlpx: result.add quote do: - template msgId*(`MSG`: type `msgStrongRecName`): int = `msgId` + template msgId*(`MSG`: type `msgStrongRecName`): uint = `msgId` proc genCode*(p: P2PProtocol): NimNode = for msg in p.messages: diff --git a/eth/p2p/private/p2p_types.nim b/eth/p2p/private/p2p_types.nim index 1676d7e..4016ce3 100644 --- a/eth/p2p/private/p2p_types.nim +++ b/eth/p2p/private/p2p_types.nim @@ -1,15 +1,19 @@ # nim-eth -# Copyright (c) 2018-2023 Status Research & Development GmbH +# Copyright (c) 2018-2024 Status Research & Development GmbH # Licensed and distributed under either of -# * MIT license (license terms in the root directory or at https://opensource.org/licenses/MIT). -# * Apache v2 license (license terms in the root directory or at https://www.apache.org/licenses/LICENSE-2.0). -# at your option. This file may not be copied, modified, or distributed except according to those terms. +# * MIT license (license terms in the root directory or at +# https://opensource.org/licenses/MIT). +# * Apache v2 license (license terms in the root directory or at +# https://www.apache.org/licenses/LICENSE-2.0). +# at your option. This file may not be copied, modified, or distributed except +# according to those terms. {.push raises: [].} import std/[deques, tables], chronos, + results, ".."/../[rlp, keys], ../../common/eth_types, ".."/[enode, kademlia, discovery, rlpxcrypt] @@ -46,12 +50,12 @@ type # Private fields: transport*: StreamTransport dispatcher*: Dispatcher - lastReqId*: int + lastReqId*: Opt[uint] secretsState*: SecretState connectionState*: ConnectionState protocolStates*: seq[RootRef] - outstandingRequests*: seq[Deque[OutstandingRequest]] - awaitedMessages*: seq[FutureBase] + outstandingRequests*: seq[Deque[OutstandingRequest]] # per `msgId` table + awaitedMessages*: seq[FutureBase] # per `msgId` table when useSnappy: snappyEnabled*: bool @@ -120,7 +124,7 @@ type disconnectHandler*: DisconnectionHandler MessageInfo* = ref object - id*: int + id*: uint # this is a `msgId` (as opposed to a `reqId`) name*: string # Private fields: @@ -138,12 +142,12 @@ type # protocol. If the other peer also supports the protocol, the stored # offset indicates the numeric value of the first message of the protocol # (for this particular connection). If the other peer doesn't support the - # particular protocol, the stored offset is -1. + # particular protocol, the stored offset is `Opt.none(uint)`. # # `messages` holds a mapping from valid message IDs to their handler procs. # - protocolOffsets*: seq[int] - messages*: seq[MessageInfo] + protocolOffsets*: seq[Opt[uint]] + messages*: seq[MessageInfo] # per `msgId` table (se above) activeProtocols*: seq[ProtocolInfo] ## @@ -151,14 +155,14 @@ type ## OutstandingRequest* = object - id*: int + id*: uint # a `reqId` that may be used for response future*: FutureBase timeoutAt*: Moment # Private types: - MessageHandlerDecorator* = proc(msgId: int, n: NimNode): NimNode + MessageHandlerDecorator* = proc(msgId: uint, n: NimNode): NimNode - ThunkProc* = proc(x: Peer, msgId: int, data: Rlp): Future[void] + ThunkProc* = proc(x: Peer, msgId: uint, data: Rlp): Future[void] {.gcsafe, async: (raises: [RlpError, EthP2PError]).} MessageContentPrinter* = proc(msg: pointer): string diff --git a/eth/p2p/rlpx.nim b/eth/p2p/rlpx.nim index 39ea67b..7b2b37a 100644 --- a/eth/p2p/rlpx.nim +++ b/eth/p2p/rlpx.nim @@ -1,9 +1,26 @@ # nim-eth -# Copyright (c) 2018-2023 Status Research & Development GmbH +# Copyright (c) 2018-2024 Status Research & Development GmbH # Licensed and distributed under either of -# * MIT license (license terms in the root directory or at https://opensource.org/licenses/MIT). -# * Apache v2 license (license terms in the root directory or at https://www.apache.org/licenses/LICENSE-2.0). -# at your option. This file may not be copied, modified, or distributed except according to those terms. +# * MIT license (license terms in the root directory or at +# https://opensource.org/licenses/MIT). +# * Apache v2 license (license terms in the root directory or at +# https://www.apache.org/licenses/LICENSE-2.0). +# at your option. This file may not be copied, modified, or distributed except +# according to those terms. + +## This module implements the `RLPx` Transport Protocol defined at +## `RLPx `_. +## +## Use NIM command line optipn `-d:p2pProtocolDebug` for dumping the +## generated driver code (just to have it stored somewhere lest one forgets.) +## +## Both, the message ID and the request/response ID are now unsigned. This goes +## along with the RLPx specs (see above) and the sub-protocol specs at +## `sub-proto `_ plus the +## fact that RLP is defined for non-negative integers smaller than 2^64 only at +## `Yellow Paper `_, +## Appx B, clauses (195) ff and (199). +## {.push raises: [].} @@ -47,7 +64,7 @@ logScope: type ResponderWithId*[MsgType] = object peer*: Peer - reqId*: int + reqId*: uint ResponderWithoutId*[MsgType] = distinct Peer @@ -107,13 +124,14 @@ when tracingEnabled: init, writeValue, getOutput proc init*[MsgName](T: type ResponderWithId[MsgName], - peer: Peer, reqId: int): T = + peer: Peer, reqId: uint): T = T(peer: peer, reqId: reqId) proc init*[MsgName](T: type ResponderWithoutId[MsgName], peer: Peer): T = T(peer) chronicles.formatIt(Peer): $(it.remote) +chronicles.formatIt(Opt[uint]): (if it.isSome(): $it.value else: "-1") include p2p_backends_helpers @@ -227,9 +245,9 @@ proc getDispatcher(node: EthereumNode, new result newSeq(result.protocolOffsets, protocolCount()) - result.protocolOffsets.fill -1 + result.protocolOffsets.fill Opt.none(uint) - var nextUserMsgId = 0x10 + var nextUserMsgId = 0x10u for localProtocol in node.protocols: let idx = localProtocol.index @@ -237,8 +255,8 @@ proc getDispatcher(node: EthereumNode, for remoteCapability in otherPeerCapabilities: if localProtocol.name == remoteCapability.name and localProtocol.version == remoteCapability.version: - result.protocolOffsets[idx] = nextUserMsgId - nextUserMsgId += localProtocol.messages.len + result.protocolOffsets[idx] = Opt.some(nextUserMsgId) + nextUserMsgId += localProtocol.messages.len.uint break findMatchingProtocol template copyTo(src, dest; index: int) = @@ -250,14 +268,14 @@ proc getDispatcher(node: EthereumNode, for localProtocol in node.protocols: let idx = localProtocol.index - if result.protocolOffsets[idx] != -1: + if result.protocolOffsets[idx].isSome: result.activeProtocols.add localProtocol localProtocol.messages.copyTo(result.messages, - result.protocolOffsets[idx]) + result.protocolOffsets[idx].value.int) -proc getMsgName*(peer: Peer, msgId: int): string = +proc getMsgName*(peer: Peer, msgId: uint): string = if not peer.dispatcher.isNil and - msgId < peer.dispatcher.messages.len and + msgId < peer.dispatcher.messages.len.uint and not peer.dispatcher.messages[msgId].isNil: return peer.dispatcher.messages[msgId].name else: @@ -268,20 +286,20 @@ proc getMsgName*(peer: Peer, msgId: int): string = of 3: "pong" else: $msgId -proc getMsgMetadata*(peer: Peer, msgId: int): (ProtocolInfo, MessageInfo) = +proc getMsgMetadata*(peer: Peer, msgId: uint): (ProtocolInfo, MessageInfo) = doAssert msgId >= 0 let dpInfo = devp2pInfo() if msgId <= dpInfo.messages[^1].id: return (dpInfo, dpInfo.messages[msgId]) - if msgId < peer.dispatcher.messages.len: + if msgId < peer.dispatcher.messages.len.uint: let numProtocol = protocolCount() for i in 0 ..< numProtocol: let protocol = getProtocol(i) let offset = peer.dispatcher.protocolOffsets[i] - if offset != -1 and - offset + protocol.messages[^1].id >= msgId: + if offset.isSome and + offset.value + protocol.messages[^1].id >= msgId: return (protocol, peer.dispatcher.messages[msgId]) # Protocol info objects @@ -318,43 +336,45 @@ proc nextMsgResolver[MsgType](msgData: Rlp, future: FutureBase) MsgType.rlpFieldsCount > 1) proc registerMsg(protocol: ProtocolInfo, - id: int, name: string, + msgId: uint, + name: string, thunk: ThunkProc, printer: MessageContentPrinter, requestResolver: RequestResolver, nextMsgResolver: NextMsgResolver) = - if protocol.messages.len <= id: - protocol.messages.setLen(id + 1) - protocol.messages[id] = MessageInfo(id: id, - name: name, - thunk: thunk, - printer: printer, - requestResolver: requestResolver, - nextMsgResolver: nextMsgResolver) + if protocol.messages.len.uint <= msgId: + protocol.messages.setLen(msgId + 1) + protocol.messages[msgId] = MessageInfo( + id: msgId, + name: name, + thunk: thunk, + printer: printer, + requestResolver: requestResolver, + nextMsgResolver: nextMsgResolver) # Message composition and encryption # -proc perPeerMsgIdImpl(peer: Peer, proto: ProtocolInfo, msgId: int): int = +proc perPeerMsgIdImpl(peer: Peer, proto: ProtocolInfo, msgId: uint): uint = result = msgId if not peer.dispatcher.isNil: - result += peer.dispatcher.protocolOffsets[proto.index] + result += peer.dispatcher.protocolOffsets[proto.index].value template getPeer(peer: Peer): auto = peer template getPeer(responder: ResponderWithId): auto = responder.peer template getPeer(responder: ResponderWithoutId): auto = Peer(responder) proc supports*(peer: Peer, proto: ProtocolInfo): bool = - peer.dispatcher.protocolOffsets[proto.index] != -1 + peer.dispatcher.protocolOffsets[proto.index].isSome proc supports*(peer: Peer, Protocol: type): bool = ## Checks whether a Peer supports a particular protocol peer.supports(Protocol.protocolInfo) -template perPeerMsgId(peer: Peer, MsgType: type): int = +template perPeerMsgId(peer: Peer, MsgType: type): uint = perPeerMsgIdImpl(peer, MsgType.msgProtocol.protocolInfo, MsgType.msgId) -proc invokeThunk*(peer: Peer, msgId: int, msgData: Rlp): Future[void] +proc invokeThunk*(peer: Peer, msgId: uint, msgData: Rlp): Future[void] {.async: (raises: [rlp.RlpError, EthP2PError]).} = template invalidIdError: untyped = raise newException(UnsupportedMessageError, @@ -362,7 +382,7 @@ proc invokeThunk*(peer: Peer, msgId: int, msgData: Rlp): Future[void] " on a connection supporting " & peer.dispatcher.describeProtocols) # msgId can be negative as it has int as type and gets decoded from rlp - if msgId >= peer.dispatcher.messages.len or msgId < 0: invalidIdError() + if msgId >= peer.dispatcher.messages.len.uint: invalidIdError() if peer.dispatcher.messages[msgId].isNil: invalidIdError() let thunk = peer.dispatcher.messages[msgId].thunk @@ -401,9 +421,9 @@ proc send*[Msg](peer: Peer, msg: Msg): Future[void] = proc registerRequest(peer: Peer, timeout: Duration, responseFuture: FutureBase, - responseMsgId: int): int = - inc peer.lastReqId - result = peer.lastReqId + responseMsgId: uint): uint = + result = if peer.lastReqId.isNone: 0u else: peer.lastReqId.value + 1u + peer.lastReqId = Opt.some(result) let timeoutAt = Moment.fromNow(timeout) let req = OutstandingRequest(id: result, @@ -418,11 +438,15 @@ proc registerRequest(peer: Peer, discard setTimer(timeoutAt, timeoutExpired, nil) -proc resolveResponseFuture(peer: Peer, msgId: int, msg: pointer, reqId: int) = +proc resolveResponseFuture(peer: Peer, msgId: uint, msg: pointer) = + ## Split off from the non request ID version from the originally combined + ## `resolveResponseFuture()` function. This seems cleaner to handle with macros + ## than a `int` or `Opt[uint]` request ID argument (yes, there is a second part + ## below.). logScope: msg = peer.dispatcher.messages[msgId].name msgContents = peer.dispatcher.messages[msgId].printer(msg) - receivedReqId = reqId + receivedReqId = -1 remotePeer = peer.remote template resolve(future) = @@ -431,7 +455,7 @@ proc resolveResponseFuture(peer: Peer, msgId: int, msg: pointer, reqId: int) = template outstandingReqs: auto = peer.outstandingRequests[msgId] - if reqId == -1: + block: # no request ID # XXX: This is a response from an ETH-like protocol that doesn't feature # request IDs. Handling the response is quite tricky here because this may # be a late response to an already timed out request or a valid response @@ -455,7 +479,22 @@ proc resolveResponseFuture(peer: Peer, msgId: int, msg: pointer, reqId: int) = resolve oldestReq.future else: trace "late or duplicate reply for a RLPx request" - else: + +proc resolveResponseFuture(peer: Peer, msgId: uint, msg: pointer, reqId: uint) = + ## Variant of `resolveResponseFuture()` for request ID argument. + logScope: + msg = peer.dispatcher.messages[msgId].name + msgContents = peer.dispatcher.messages[msgId].printer(msg) + receivedReqId = reqId + remotePeer = peer.remote + + template resolve(future) = + (peer.dispatcher.messages[msgId].requestResolver)(msg, future) + + template outstandingReqs: auto = + peer.outstandingRequests[msgId] + + block: # have request ID # TODO: This is not completely sound because we are still using a global # `reqId` sequence (the problem is that we might get a response ID that # matches a request ID for a different type of request). To make the code @@ -464,7 +503,7 @@ proc resolveResponseFuture(peer: Peer, msgId: int, msg: pointer, reqId: int) = # correctly (because then, we'll be reusing the same reqIds for different # types of requests). Alternatively, we can assign a separate interval in # the `reqId` space for each type of response. - if reqId > peer.lastReqId: + if peer.lastReqId.isNone or reqId > peer.lastReqId.value: warn "RLPx response without a matching request" return @@ -500,7 +539,7 @@ proc resolveResponseFuture(peer: Peer, msgId: int, msg: pointer, reqId: int) = debug "late or duplicate reply for a RLPx request" -proc recvMsg*(peer: Peer): Future[tuple[msgId: int, msgData: Rlp]] {.async.} = +proc recvMsg*(peer: Peer): Future[tuple[msgId: uint, msgData: Rlp]] {.async.} = ## This procs awaits the next complete RLPx message in the TCP stream var headerBytes: array[32, byte] @@ -562,11 +601,11 @@ proc recvMsg*(peer: Peer): Future[tuple[msgId: int, msgData: Rlp]] {.async.} = var rlp = rlpFromBytes(decryptedBytes) - var msgId: int32 + var msgId: uint32 try: - # int32 as this seems more than big enough for the amount of msgIds - msgId = rlp.read(int32) - result = (msgId.int, rlp) + # uint32 as this seems more than big enough for the amount of msgIds + msgId = rlp.read(uint32) + result = (msgId.uint, rlp) except RlpError: await peer.disconnectAndRaise(BreachOfProtocol, "Cannot read RLPx message id") @@ -635,7 +674,7 @@ proc nextMsg*(peer: Peer, MsgType: type): Future[MsgType] = # message handler code as the TODO mentions already. proc dispatchMessages*(peer: Peer) {.async.} = while peer.connectionState notin {Disconnecting, Disconnected}: - var msgId: int + var msgId: uint var msgData: Rlp try: (msgId, msgData) = await peer.recvMsg() @@ -676,7 +715,7 @@ proc dispatchMessages*(peer: Peer) {.async.} = # The documentation will need to be updated, explaining the fact that # nextMsg will be resolved only if the message handler has executed # successfully. - if msgId >= 0 and msgId < peer.awaitedMessages.len and + if msgId < peer.awaitedMessages.len.uint and peer.awaitedMessages[msgId] != nil: let msgInfo = peer.dispatcher.messages[msgId] try: @@ -738,12 +777,15 @@ proc p2pProtocolBackendImpl*(protocol: P2PProtocol): Backend = else: ResponderWithoutId result.implementMsg = proc (msg: Message) = + # FIXME: Or is it already assured that `msgId` is available? + doAssert msg.id.isSome + var - msgId = msg.id + msgIdValue = msg.id.value msgIdent = msg.ident msgName = $msgIdent msgRecName = msg.recName - responseMsgId = if msg.response != nil: msg.response.id else: -1 + responseMsgId = if msg.response.isNil: Opt.none(uint) else: msg.response.id hasReqId = msg.hasReqId protocol = msg.protocol @@ -764,11 +806,13 @@ proc p2pProtocolBackendImpl*(protocol: P2PProtocol): Backend = if hasReqId: # Messages using request Ids readParams.add quote do: - let `reqIdVar` = `read`(`receivedRlp`, int) + let `reqIdVar` = `read`(`receivedRlp`, uint) case msg.kind of msgRequest: - let reqToResponseOffset = responseMsgId - msgId + doAssert responseMsgId.isSome + + let reqToResponseOffset = responseMsgId.value - msgIdValue let responseMsgId = quote do: `perPeerMsgIdVar` + `reqToResponseOffset` # Each request is registered so we can resolve it when the response @@ -814,14 +858,20 @@ proc p2pProtocolBackendImpl*(protocol: P2PProtocol): Backend = when tracingEnabled: readParams.add newCall(bindSym"logReceivedMsg", peerVar, receivedMsg) - let callResolvedResponseFuture = if msg.kind == msgResponse: - newCall(resolveResponseFuture, - peerVar, - newCall(perPeerMsgId, peerVar, msgRecName), - newCall("addr", receivedMsg), - if hasReqId: reqIdVar else: newLit(-1)) - else: - newStmtList() + let callResolvedResponseFuture = + if msg.kind != msgResponse: + newStmtList() + elif hasReqId: + newCall(resolveResponseFuture, + peerVar, + newCall(perPeerMsgId, peerVar, msgRecName), + newCall("addr", receivedMsg), + reqIdVar) + else: + newCall(resolveResponseFuture, + peerVar, + newCall(perPeerMsgId, peerVar, msgRecName), + newCall("addr", receivedMsg)) var userHandlerParams = @[peerVar] if hasReqId: userHandlerParams.add reqIdVar @@ -831,7 +881,7 @@ proc p2pProtocolBackendImpl*(protocol: P2PProtocol): Backend = thunkName = ident(msgName & "Thunk") msg.defineThunk quote do: - proc `thunkName`(`peerVar`: `Peer`, _: int, data: Rlp) + proc `thunkName`(`peerVar`: `Peer`, _: uint, data: Rlp) # Fun error if you just use `RlpError` instead of `rlp.RlpError`: # "Error: type expected, but got symbol 'RlpError' of kind 'EnumField'" {.async: (raises: [rlp.RlpError, EthP2PError]).} = @@ -864,9 +914,9 @@ proc p2pProtocolBackendImpl*(protocol: P2PProtocol): Backend = quote: return `sendCall` let perPeerMsgIdValue = if isSubprotocol: - newCall(perPeerMsgIdImpl, peerVar, protocol.protocolInfo, newLit(msgId)) + newCall(perPeerMsgIdImpl, peerVar, protocol.protocolInfo, newLit(msgIdValue)) else: - newLit(msgId) + newLit(msgIdValue) if paramCount > 1: # In case there are more than 1 parameter, @@ -880,9 +930,8 @@ proc p2pProtocolBackendImpl*(protocol: P2PProtocol): Backend = let initWriter = quote do: var `rlpWriter` = `initRlpWriter`() - const `perProtocolMsgIdVar` {.used.} = `msgId` + const `perProtocolMsgIdVar` {.used.} = `msgIdValue` let `perPeerMsgIdVar` = `perPeerMsgIdValue` - # TODO: rlpx should error if perPeerMsgIdVar is signed `append`(`rlpWriter`, `perPeerMsgIdVar`) when tracingEnabled: @@ -902,7 +951,7 @@ proc p2pProtocolBackendImpl*(protocol: P2PProtocol): Backend = protocol.outProcRegistrations.add( newCall(registerMsg, protocolVar, - newLit(msgId), + newLit(msgIdValue), newLit(msgName), thunkName, newTree(nnkBracketExpr, messagePrinter, msgRecName), @@ -1026,7 +1075,7 @@ proc initPeerState*(peer: Peer, capabilities: openArray[Capability]) # Similarly, we need a bit of book-keeping data to keep track # of the potentially concurrent calls to `nextMsg`. peer.awaitedMessages.newSeq(peer.dispatcher.messages.len) - peer.lastReqId = 0 + peer.lastReqId = Opt.some(0u) peer.initProtocolStates peer.dispatcher.activeProtocols proc postHelloSteps(peer: Peer, h: DevP2P.hello) {.async.} = @@ -1416,10 +1465,10 @@ when isMainModule: # are considered GcSafe. The short answer is that they aren't, because # they dispatch into user code that might use the GC. type - GcSafeDispatchMsg = proc (peer: Peer, msgId: int, msgData: var Rlp) + GcSafeDispatchMsg = proc (peer: Peer, msgId: uint, msgData: var Rlp) GcSafeRecvMsg = proc (peer: Peer): - Future[tuple[msgId: int, msgData: Rlp]] {.gcsafe.} + Future[tuple[msgId: uint, msgData: Rlp]] {.gcsafe.} GcSafeAccept = proc (transport: StreamTransport, myKeys: KeyPair): Future[Peer] {.gcsafe.} diff --git a/tests/fuzzing/rlpx/thunk.nim b/tests/fuzzing/rlpx/thunk.nim index 6764af4..2a27b35 100644 --- a/tests/fuzzing/rlpx/thunk.nim +++ b/tests/fuzzing/rlpx/thunk.nim @@ -29,6 +29,6 @@ test: # because of undeterministic behaviour due to usage of network/async. try: var (msgId, msgData) = recvMsgMock(payload) - waitFor peer.invokeThunk(msgId.int, msgData) + waitFor peer.invokeThunk(msgId, msgData) except CatchableError as e: debug "Test caused CatchableError", exception=e.name, trace=e.repr, msg=e.msg diff --git a/tests/p2p/p2p_test_helper.nim b/tests/p2p/p2p_test_helper.nim index 3950dae..a9556be 100644 --- a/tests/p2p/p2p_test_helper.nim +++ b/tests/p2p/p2p_test_helper.nim @@ -1,3 +1,13 @@ +# nim-eth +# Copyright (c) 2018-2024 Status Research & Development GmbH +# Licensed and distributed under either of +# * MIT license (license terms in the root directory or at +# https://opensource.org/licenses/MIT). +# * Apache v2 license (license terms in the root directory or at +# https://www.apache.org/licenses/LICENSE-2.0). +# at your option. This file may not be copied, modified, or distributed except +# according to those terms. + import std/strutils, chronos, @@ -28,8 +38,8 @@ proc setupTestNode*( template sourceDir*: string = currentSourcePath.rsplit(DirSep, 1)[0] -proc recvMsgMock*(msg: openArray[byte]): tuple[msgId: int, msgData: Rlp] = +proc recvMsgMock*(msg: openArray[byte]): tuple[msgId: uint, msgData: Rlp] = var rlp = rlpFromBytes(msg) - let msgId = rlp.read(int32) - return (msgId.int, rlp) + let msgId = rlp.read(uint32) + return (msgId.uint, rlp) diff --git a/tests/p2p/test_rlpx_thunk.json b/tests/p2p/test_rlpx_thunk.json index 189c61b..1b3a606 100644 --- a/tests/p2p/test_rlpx_thunk.json +++ b/tests/p2p/test_rlpx_thunk.json @@ -9,14 +9,14 @@ "error": "UnsupportedMessageError", "description": "This is a message id not used by devp2p or eth" }, - "Message id that is bigger than int32": { + "Message id that is bigger than uint32": { "payload": "888888888888888888", "error": "UnsupportedRlpError", "description": "This payload will result in too large int for a message id" }, - "Message id that is negative": { - "payload": "8488888888", - "error": "UnsupportedRlpError", + "Unsupported big message id": { + "payload": "848888888888", + "error": "UnsupportedMessageError", "description": "This payload will result in a negative number as message id" }, "No Hash nor Status, but empty list": { diff --git a/tests/p2p/test_rlpx_thunk.nim b/tests/p2p/test_rlpx_thunk.nim index 3c3bcb1..f3b0cc5 100644 --- a/tests/p2p/test_rlpx_thunk.nim +++ b/tests/p2p/test_rlpx_thunk.nim @@ -1,3 +1,13 @@ +# nim-eth +# Copyright (c) 2018-2024 Status Research & Development GmbH +# Licensed and distributed under either of +# * MIT license (license terms in the root directory or at +# https://opensource.org/licenses/MIT). +# * Apache v2 license (license terms in the root directory or at +# https://www.apache.org/licenses/LICENSE-2.0). +# at your option. This file may not be copied, modified, or distributed except +# according to those terms. + {.used.} import @@ -23,7 +33,7 @@ let peer = res.get() proc testThunk(payload: openArray[byte]) = var (msgId, msgData) = recvMsgMock(payload) - waitFor peer.invokeThunk(msgId.int, msgData) + waitFor peer.invokeThunk(msgId, msgData) proc testPayloads(filename: string) = let js = json.parseFile(filename)