remove unusued rlpx features, tighten hello exchange and some error h… (#759)

* disconnect peers that send non-hello messages during initial hello
step
* fix devp2p protocol version - 4 because we don't implement snappy
(yet) - this is cosmetic since this particular version field is not
actually being used
* fix ack message length checking
* move RLPx transport code to separate module, annotate with asyncraises
* increase max RLPx message size to 16mb, per EIP-706
* make sure both accept/connect timeout after 10s
* aim to log every connection attempt once at debug level
* make capability-id/context-id check more accurate
* disallow random messages before hello

eth/p2p.nim

@@ -27,7 +27,7 @@ proc addCapability*(node: EthereumNode,
 
   let pos = lowerBound(node.protocols, p, rlpx.cmp)
   node.protocols.insert(p, pos)
-  node.capabilities.insert(p.asCapability, pos)
+  node.capabilities.insert(p.capability, pos)
 
   if p.networkStateInitializer != nil and networkState.isNil:
     node.protocolStates[p.index] = p.networkStateInitializer(node)

eth/p2p/auth.nim

@@ -40,7 +40,7 @@ const
     ## least 100 bytes of padding to make the message distinguishable from
     ## pre-EIP8 and at most 200 to stay within recommendation
 
-  # signature + pubkey + nounce + version + rlp encoding overhead
+  # signature + pubkey + nonce + version + rlp encoding overhead
   # 65 + 64 + 32 + 1 + 7 = 169
   PlainAuthMessageEIP8Length = 169
   PlainAuthMessageMaxEIP8 = PlainAuthMessageEIP8Length + MaxPadLenEIP8
@@ -57,7 +57,8 @@ const
   PlainAckMessageEIP8Length = 102
   PlainAckMessageMaxEIP8 = PlainAckMessageEIP8Length + MaxPadLenEIP8
   # Min. encrypted message + size prefix = 217
-  AckMessageEIP8Length* = eciesEncryptedLength(PlainAckMessageMaxEIP8) + MsgLenLenEIP8
+  AckMessageEIP8Length* =
+    eciesEncryptedLength(PlainAckMessageEIP8Length) + MsgLenLenEIP8
   AckMessageMaxEIP8* = AckMessageEIP8Length + MaxPadLenEIP8
     ## Minimal output buffer size to pass into `ackMessage`
 
@@ -225,18 +226,27 @@ proc ackMessage*(
     return err(AuthError.EciesError)
   ok(fullsize)
 
-proc decodeMsgLen*(h: Handshake, input: openArray[byte]): AuthResult[int] =
+func decodeMsgLen(input: openArray[byte]): AuthResult[int] =
   if input.len < 2:
     return err(AuthError.IncompleteError)
-  let len = int(uint16.fromBytesBE(input)) + 2
+  ok(int(uint16.fromBytesBE(input)) + 2)
+
+func decodeAuthMsgLen*(h: Handshake, input: openArray[byte]): AuthResult[int] =
+  let len = ?decodeMsgLen(input)
   if len < AuthMessageEIP8Length:
     return err(AuthError.IncompleteError)
   ok(len)
 
+func decodeAckMsgLen*(h: Handshake, input: openArray[byte]): AuthResult[int] =
+  let len = ?decodeMsgLen(input)
+  if len < AckMessageEIP8Length:
+    return err(AuthError.IncompleteError)
+  ok(len)
+
 proc decodeAuthMessage*(h: var Handshake, m: openArray[byte]): AuthResult[void] =
   ## Decodes EIP-8 AuthMessage.
   let
-    expectedLength = ?h.decodeMsgLen(m)
+    expectedLength = ?h.decodeAuthMsgLen(m)
     size = expectedLength - MsgLenLenEIP8
 
   # Check if the prefixed size is => than the minimum
@@ -289,7 +299,7 @@ proc decodeAuthMessage*(h: var Handshake, m: openArray[byte]): AuthResult[void]
 proc decodeAckMessage*(h: var Handshake, m: openArray[byte]): AuthResult[void] =
   ## Decodes EIP-8 AckMessage.
   let
-    expectedLength = ?h.decodeMsgLen(m)
+    expectedLength = ?h.decodeAckMsgLen(m)
     size = expectedLength - MsgLenLenEIP8
 
   # Check if the prefixed size is => than the minimum

eth/p2p/p2p_backends_helpers.nim

@@ -16,7 +16,7 @@ let protocolManager = ProtocolManager()
 proc registerProtocol*(proto: ProtocolInfo) {.gcsafe.} =
   {.gcsafe.}:
     proto.index = protocolManager.protocols.len
-    if proto.name == "p2p":
+    if proto.capability.name == "p2p":
       doAssert(proto.index == 0)
     protocolManager.protocols.add proto
 

eth/p2p/p2p_protocol_dsl.nim

@@ -25,7 +25,7 @@
 import
   std/[options, sequtils, macrocache],
   results,
-  stew/shims/macros, chronos, faststreams/outputs
+  stew/shims/macros, chronos
 
 type
   MessageKind* = enum
@@ -699,77 +699,6 @@ proc writeParamsAsRecord*(params: openArray[NimNode],
       var `writer` = init(WriterType(`Format`), `outputStream`)
       writeValue(`writer`, `param`)
 
-proc useStandardBody*(sendProc: SendProc,
-                      preSerializationStep: proc(stream: NimNode): NimNode,
-                      postSerializationStep: proc(stream: NimNode): NimNode,
-                      sendCallGenerator: proc (peer, bytes: NimNode): NimNode) =
-  let
-    msg = sendProc.msg
-    msgBytes = ident "msgBytes"
-    recipient = sendProc.peerParam
-    sendCall = sendCallGenerator(recipient, msgBytes)
-
-  if sendProc.msgParams.len == 0:
-    sendProc.setBody quote do:
-      var `msgBytes`: seq[byte]
-      `sendCall`
-    return
-
-  let
-    outputStream = ident "outputStream"
-
-    msgRecName = msg.recName
-    Format = msg.protocol.backend.SerializationFormat
-
-    preSerialization = if preSerializationStep.isNil: newStmtList()
-                       else: preSerializationStep(outputStream)
-
-    serialization = writeParamsAsRecord(sendProc.msgParams,
-                                       outputStream, Format, msgRecName)
-
-    postSerialization = if postSerializationStep.isNil: newStmtList()
-                        else: postSerializationStep(outputStream)
-
-    tracing = when not tracingEnabled:
-                newStmtList()
-              else:
-                logSentMsgFields(recipient,
-                                 msg.protocol.protocolInfo,
-                                 $msg.ident,
-                                 sendProc.msgParams)
-
-  sendProc.setBody quote do:
-    mixin init, WriterType, beginRecord, endRecord, getOutput
-
-    var `outputStream` = memoryOutput()
-    `preSerialization`
-    `serialization`
-    `postSerialization`
-    `tracing`
-    let `msgBytes` = getOutput(`outputStream`)
-    `sendCall`
-
-proc correctSerializerProcParams(params: NimNode) =
-  # A serializer proc is just like a send proc, but:
-  # 1. it has a void return type
-  params[0] = ident "void"
-  # 2. The peer params is replaced with OutputStream
-  params[1] = newIdentDefs(streamVar, bindSym "OutputStream")
-  # 3. The timeout param is removed
-  params.del(params.len - 1)
-
-proc createSerializer*(msg: Message, procType = nnkProcDef): NimNode =
-  var serializer = msg.createSendProc(procType, nameSuffix = "Serializer")
-  correctSerializerProcParams serializer.def.params
-
-  serializer.setBody writeParamsAsRecord(
-    serializer.msgParams,
-    streamVar,
-    msg.protocol.backend.SerializationFormat,
-    msg.recName)
-
-  return serializer.def
-
 proc defineThunk*(msg: Message, thunk: NimNode) =
   let protocol = msg.protocol
 
@@ -1019,7 +948,7 @@ proc genCode*(p: P2PProtocol): NimNode =
   regBody.add newCall(p.backend.registerProtocol, protocolVar)
 
   result.add quote do:
-    proc `protocolReg`() {.raises: [RlpError].} =
+    proc `protocolReg`() =
       let `protocolVar` = `protocolInit`
       `regBody`
     `protocolReg`()

eth/p2p/private/p2p_types.nim

@@ -15,9 +15,9 @@ import
   chronos,
   results,
   ".."/../[rlp], ../../common/[base, keys],
-  ".."/[enode, kademlia, discovery, rlpxcrypt]
+  ".."/[enode, kademlia, discovery, rlpxtransport]
 
-export base.NetworkId
+export base.NetworkId, rlpxtransport
 
 const
   useSnappy* = defined(useSnappy)
@@ -48,16 +48,16 @@ type
     network*: EthereumNode
 
     # Private fields:
-    transport*: StreamTransport
+    transport*: RlpxTransport
     dispatcher*: Dispatcher
     lastReqId*: Opt[uint64]
-    secretsState*: SecretState
     connectionState*: ConnectionState
     protocolStates*: seq[RootRef]
     outstandingRequests*: seq[Deque[OutstandingRequest]] # per `msgId` table
     awaitedMessages*: seq[FutureBase] # per `msgId` table
     when useSnappy:
       snappyEnabled*: bool
+    clientId*: string
 
   SeenNode* = object
     nodeId*: NodeId
@@ -111,8 +111,7 @@ type
     protocols*: seq[ProtocolInfo]
 
   ProtocolInfo* = ref object
-    name*: string
+    capability*: Capability
-    version*: uint64
     messages*: seq[MessageInfo]
     index*: int # the position of the protocol in the
                 # ordered list of supported protocols
@@ -209,12 +208,14 @@ type
     ClientQuitting = 0x08,
     UnexpectedIdentity = 0x09,
     SelfConnection = 0x0A,
-    MessageTimeout = 0x0B,
+    PingTimeout = 0x0B,
     SubprotocolReason = 0x10
 
   Address = enode.Address
 
 proc `$`*(peer: Peer): string = $peer.remote
 
+proc `$`*(v: Capability): string = v.name & "/" & $v.version
+
 proc toENode*(v: EthereumNode): ENode =
   ENode(pubkey: v.keys.pubkey, address: v.address)

eth/p2p/rlpx.nim

@@ -25,17 +25,32 @@
 {.push raises: [].}
 
 import
-  std/[algorithm, deques, options, typetraits, os],
+  std/[algorithm, deques, options, os, sequtils, strutils, typetraits],
-  stew/shims/macros, chronicles, nimcrypto/utils, chronos, metrics,
+  stew/shims/macros, chronicles, chronos, metrics,
   ".."/[rlp, async_utils],
   ./private/p2p_types, "."/[kademlia, auth, rlpxcrypt, enode, p2p_protocol_dsl]
 
+const
+  devp2pVersion* = 4
+  connectionTimeout = 10.seconds
+
+  msgIdHello = byte 0
+  msgIdDisconnect = byte 1
+  msgIdPing = byte 2
+  msgIdPong = byte 3
+
 # TODO: This doesn't get enabled currently in any of the builds, so we send a
 # devp2p protocol handshake message with version. Need to check if some peers
 # drop us because of this.
 when useSnappy:
   import snappy
-  const devp2pSnappyVersion* = 5
+  const
+    devp2pSnappyVersion* = 5
+    # The maximum message size is normally limited by the 24-bit length field in
+    # the message header but in the case of snappy, we need to protect against
+    # decompression bombs:
+    # https://eips.ethereum.org/EIPS/eip-706#avoiding-dos-attacks
+    maxMsgSize = 1024 * 1024 * 16
 
 # TODO: chronicles re-export here is added for the error
 # "undeclared identifier: 'activeChroniclesStream'", when the code using p2p
@@ -106,11 +121,6 @@ proc read(rlp: var Rlp; T: type DisconnectionReasonList): T
 
   raise newException(RlpTypeMismatch, "Single entry list expected")
 
-const
-  devp2pVersion* = 4
-  maxMsgSize = 1024 * 1024 * 10
-  HandshakeTimeout = MessageTimeout
-
 include p2p_tracing
 
 when tracingEnabled:
@@ -184,6 +194,9 @@ proc messagePrinter[MsgType](msg: pointer): string {.gcsafe.} =
 proc disconnect*(peer: Peer, reason: DisconnectionReason,
   notifyOtherPeer = false) {.async: (raises:[]).}
 
+# TODO Rework the disconnect-and-raise flow to not do both raising
+#      and disconnection - this results in convoluted control flow and redundant
+#      disconnect calls
 template raisePeerDisconnected(msg: string, r: DisconnectionReason) =
   var e = newException(PeerDisconnected, msg)
   e.reason = r
@@ -216,7 +229,7 @@ proc handshakeImpl[T](peer: Peer,
     # understanding what error occured where.
     # And also, incoming and outgoing disconnect errors should be seperated,
     # probably by seperating the actual disconnect call to begin with.
-    await disconnectAndRaise(peer, HandshakeTimeout,
+    await disconnectAndRaise(peer, TcpError,
                              "Protocol handshake was not received in time.")
   except CatchableError as exc:
     raise newException(P2PInternalError, exc.msg)
@@ -228,23 +241,17 @@ proc `==`(lhs, rhs: Dispatcher): bool =
   lhs.activeProtocols == rhs.activeProtocols
 
 proc describeProtocols(d: Dispatcher): string =
-  result = ""
+  d.activeProtocols.mapIt($it.capability).join(",")
-  for protocol in d.activeProtocols:
-    if result.len != 0: result.add(',')
-    for c in protocol.name: result.add(c)
 
 proc numProtocols(d: Dispatcher): int =
   d.activeProtocols.len
 
-proc getDispatcher(node: EthereumNode,
+proc getDispatcher(
-                   otherPeerCapabilities: openArray[Capability]): Dispatcher =
+    node: EthereumNode, otherPeerCapabilities: openArray[Capability]
-  # TODO: sub-optimal solution until progress is made here:
+): Opt[Dispatcher] =
-  # https://github.com/nim-lang/Nim/issues/7457
+  let dispatcher = Dispatcher()
-  # We should be able to find an existing dispatcher without allocating a new one
+  newSeq(dispatcher.protocolOffsets, protocolCount())
-
+  dispatcher.protocolOffsets.fill Opt.none(uint64)
-  new result
-  newSeq(result.protocolOffsets, protocolCount())
-  result.protocolOffsets.fill Opt.none(uint64)
 
   var nextUserMsgId = 0x10u64
 
@@ -252,9 +259,8 @@ proc getDispatcher(node: EthereumNode,
     let idx = localProtocol.index
     block findMatchingProtocol:
       for remoteCapability in otherPeerCapabilities:
-        if localProtocol.name == remoteCapability.name and
+        if localProtocol.capability == remoteCapability:
-           localProtocol.version == remoteCapability.version:
+          dispatcher.protocolOffsets[idx] = Opt.some(nextUserMsgId)
-          result.protocolOffsets[idx] = Opt.some(nextUserMsgId)
           nextUserMsgId += localProtocol.messages.len.uint64
           break findMatchingProtocol
 
@@ -262,15 +268,21 @@ proc getDispatcher(node: EthereumNode,
     for i in 0 ..< src.len:
       dest[index + i] = src[i]
 
-  result.messages = newSeq[MessageInfo](nextUserMsgId)
+  dispatcher.messages = newSeq[MessageInfo](nextUserMsgId)
-  devp2pInfo.messages.copyTo(result.messages, 0)
+  devp2pInfo.messages.copyTo(dispatcher.messages, 0)
 
   for localProtocol in node.protocols:
     let idx = localProtocol.index
-    if result.protocolOffsets[idx].isSome:
+    if dispatcher.protocolOffsets[idx].isSome:
-      result.activeProtocols.add localProtocol
+      dispatcher.activeProtocols.add localProtocol
-      localProtocol.messages.copyTo(result.messages,
+      localProtocol.messages.copyTo(
-                                    result.protocolOffsets[idx].value.int)
+        dispatcher.messages, dispatcher.protocolOffsets[idx].value.int
+      )
+
+  if dispatcher.numProtocols == 0:
+    Opt.none(Dispatcher)
+  else:
+    Opt.some(dispatcher)
 
 proc getMsgName*(peer: Peer, msgId: uint64): string =
   if not peer.dispatcher.isNil and
@@ -279,40 +291,26 @@ proc getMsgName*(peer: Peer, msgId: uint64): string =
     return peer.dispatcher.messages[msgId].name
   else:
     return case msgId
-           of 0: "hello"
+           of msgIdHello: "hello"
-           of 1: "disconnect"
+           of msgIdDisconnect: "disconnect"
-           of 2: "ping"
+           of msgIdPing: "ping"
-           of 3: "pong"
+           of msgIdPong: "pong"
            else: $msgId
 
-proc getMsgMetadata*(peer: Peer, msgId: uint64): (ProtocolInfo, MessageInfo) =
-  doAssert msgId >= 0
-
-  let dpInfo = devp2pInfo()
-  if msgId <= dpInfo.messages[^1].id:
-    return (dpInfo, dpInfo.messages[msgId])
-
-  if msgId < peer.dispatcher.messages.len.uint64:
-    let numProtocol = protocolCount()
-    for i in 0 ..< numProtocol:
-      let protocol = getProtocol(i)
-      let offset = peer.dispatcher.protocolOffsets[i]
-      if offset.isSome and
-         offset.value + protocol.messages[^1].id >= msgId:
-        return (protocol, peer.dispatcher.messages[msgId])
-
 # Protocol info objects
 #
 
-proc initProtocol(name: string, version: uint64,
+proc initProtocol(
-                  peerInit: PeerStateInitializer,
+    name: string,
-                  networkInit: NetworkStateInitializer): ProtocolInfo =
+    version: uint64,
+    peerInit: PeerStateInitializer,
+    networkInit: NetworkStateInitializer,
+): ProtocolInfo =
   ProtocolInfo(
-    name    : name,
+    capability: Capability(name: name, version: version),
-    version : version,
     messages: @[],
     peerStateInitializer: peerInit,
-    networkStateInitializer: networkInit
+    networkStateInitializer: networkInit,
   )
 
 proc setEventHandlers(p: ProtocolInfo,
@@ -321,12 +319,13 @@ proc setEventHandlers(p: ProtocolInfo,
   p.handshake = handshake
   p.disconnectHandler = disconnectHandler
 
-func asCapability*(p: ProtocolInfo): Capability =
-  result.name = p.name
-  result.version = p.version
-
 proc cmp*(lhs, rhs: ProtocolInfo): int =
-  return cmp(lhs.name, rhs.name)
+  let c = cmp(lhs.capability.name, rhs.capability.name)
+  if c == 0:
+    # Highest version first!
+    -cmp(lhs.capability.version, rhs.capability.version)
+  else:
+    c
 
 proc nextMsgResolver[MsgType](msgData: Rlp, future: FutureBase)
     {.gcsafe, raises: [RlpError].} =
@@ -393,29 +392,57 @@ template compressMsg(peer: Peer, data: seq[byte]): seq[byte] =
   when useSnappy:
     if peer.snappyEnabled:
       snappy.encode(data)
-    else: data
+    else:
+      data
   else:
     data
 
-proc sendMsg*(peer: Peer, data: seq[byte]) {.async.} =
+proc recvMsg(
-  var cipherText = encryptMsg(peer.compressMsg(data), peer.secretsState)
+    peer: Peer
+): Future[tuple[msgId: uint64, msgRlp: Rlp]] {.
+    async: (raises: [CancelledError, PeerDisconnected])
+.} =
   try:
-    var res = await peer.transport.write(cipherText)
+    var msgBody = await peer.transport.recvMsg()
-    if res != len(cipherText):
+    when useSnappy:
-      # This is ECONNRESET or EPIPE case when remote peer disconnected.
+      if peer.snappyEnabled:
-      await peer.disconnect(TcpError)
+        msgBody = snappy.decode(msgBody, maxMsgSize)
-      discard
+        if msgBody.len == 0:
-  except CatchableError as e:
+          await peer.disconnectAndRaise(
-    await peer.disconnect(TcpError)
+            BreachOfProtocol, "Snappy uncompress encountered malformed data"
-    raise e
+          )
+    var tmp = rlpFromBytes(msgBody)
+    let msgId = tmp.read(uint64)
+    return (msgId, tmp)
+  except TransportError as exc:
+    await peer.disconnectAndRaise(TcpError, exc.msg)
+  except RlpxTransportError as exc:
+    await peer.disconnectAndRaise(BreachOfProtocol, exc.msg)
+  except RlpError:
+    await peer.disconnectAndRaise(BreachOfProtocol, "Could not decode msgId")
 
-proc send*[Msg](peer: Peer, msg: Msg): Future[void] =
+proc encodeMsg(msgId: uint64, msg: auto): seq[byte] =
+  var rlpWriter = initRlpWriter()
+  rlpWriter.append msgId
+  rlpWriter.appendRecordType(msg, typeof(msg).rlpFieldsCount > 1)
+  rlpWriter.finish
+
+proc sendMsg(
+    peer: Peer, data: seq[byte]
+): Future[void] {.async: (raises: [CancelledError, PeerDisconnected]).} =
+  try:
+    await peer.transport.sendMsg(peer.compressMsg(data))
+  except TransportError as exc:
+    await peer.disconnectAndRaise(TcpError, exc.msg)
+  except RlpxTransportError as exc:
+    await peer.disconnectAndRaise(BreachOfProtocol, exc.msg)
+
+proc send*[Msg](
+    peer: Peer, msg: Msg
+): Future[void] {.async: (raises: [CancelledError, PeerDisconnected], raw: true).} =
   logSentMsg(peer, msg)
 
-  var rlpWriter = initRlpWriter()
+  peer.sendMsg encodeMsg(perPeerMsgId(peer, Msg), msg)
-  rlpWriter.append perPeerMsgId(peer, Msg)
-  rlpWriter.appendRecordType(msg, Msg.rlpFieldsCount > 1)
-  peer.sendMsg rlpWriter.finish
 
 proc registerRequest(peer: Peer,
                      timeout: Duration,
@@ -540,70 +567,6 @@ proc resolveResponseFuture(peer: Peer, msgId: uint64, msg: pointer, reqId: uint6
 
     trace "late or dup RPLx reply ignored"
 
-proc recvMsg*(peer: Peer): Future[tuple[msgId: uint64, msgData: Rlp]] {.async.} =
-  ##  This procs awaits the next complete RLPx message in the TCP stream
-
-  var headerBytes: array[32, byte]
-  await peer.transport.readExactly(addr headerBytes[0], 32)
-
-  var msgHeader: RlpxHeader
-  let msgSize = decryptHeader(
-      peer.secretsState, headerBytes, msgHeader).valueOr:
-    await peer.disconnectAndRaise(BreachOfProtocol,
-                                  "Cannot decrypt RLPx frame header")
-    0 # TODO raises analysis insufficient
-
-  if msgSize > maxMsgSize:
-    await peer.disconnectAndRaise(BreachOfProtocol,
-                                  "RLPx message exceeds maximum size")
-
-  let remainingBytes = encryptedLength(msgSize) - 32
-  var encryptedBytes = newSeq[byte](remainingBytes)
-  await peer.transport.readExactly(addr encryptedBytes[0], len(encryptedBytes))
-
-  let decryptedMaxLength = decryptedLength(msgSize)
-  var
-    decryptedBytes = newSeq[byte](decryptedMaxLength)
-
-  if decryptBody(peer.secretsState, encryptedBytes, msgSize,
-                 decryptedBytes).isErr():
-    await peer.disconnectAndRaise(BreachOfProtocol,
-                                  "Cannot decrypt RLPx frame body")
-
-  decryptedBytes.setLen(msgSize)
-
-  when useSnappy:
-    if peer.snappyEnabled:
-      decryptedBytes = snappy.decode(decryptedBytes, maxMsgSize)
-      if decryptedBytes.len == 0:
-        await peer.disconnectAndRaise(BreachOfProtocol,
-                                      "Snappy uncompress encountered malformed data")
-
-  # Check embedded header-data for start of an obsoleted chunked message.
-  # Note that the check should come *before* the `msgId` is read. For
-  # instance, if this is a malformed packet, then the `msgId` might be
-  # random which in turn might try to access a `peer.dispatcher.messages[]`
-  # slot with a `nil` entry.
-  #
-  # The current RLPx requirements need both tuuple entries be zero, see
-  # github.com/ethereum/devp2p/blob/master/rlpx.md#framing
-  #
-  if (msgHeader[4] and 127) != 0 or # capability-id, now required to be zero
-     (msgHeader[5] and 127) != 0:   # context-id, now required to be zero
-    await peer.disconnectAndRaise(
-      BreachOfProtocol, "Rejected obsoleted chunked message header")
-
-  var rlp = rlpFromBytes(decryptedBytes)
-
-  var msgId: uint32
-  try:
-    # uint32 as this seems more than big enough for the amount of msgIds
-    msgId = rlp.read(uint32)
-    result = (msgId.uint64, rlp)
-  except RlpError:
-    await peer.disconnectAndRaise(BreachOfProtocol,
-                                  "Cannot read RLPx message id")
-
 
 proc checkedRlpRead(peer: Peer, r: var Rlp, MsgType: type):
     auto {.raises: [RlpError].} =
@@ -622,32 +585,6 @@ proc checkedRlpRead(peer: Peer, r: var Rlp, MsgType: type):
 
       raise e
 
-proc waitSingleMsg(peer: Peer, MsgType: type): Future[MsgType] {.async.} =
-  let wantedId = peer.perPeerMsgId(MsgType)
-  while true:
-    var (nextMsgId, nextMsgData) = await peer.recvMsg()
-
-    if nextMsgId == wantedId:
-      try:
-        result = checkedRlpRead(peer, nextMsgData, MsgType)
-        logReceivedMsg(peer, result)
-        return
-      except rlp.RlpError:
-        await peer.disconnectAndRaise(BreachOfProtocol,
-                                      "Invalid RLPx message body")
-
-    elif nextMsgId == 1: # p2p.disconnect
-      # TODO: can still raise RlpError here...?
-      let reasonList = nextMsgData.read(DisconnectionReasonList)
-      let reason = reasonList.value
-      await peer.disconnect(reason)
-      trace "disconnect message received in waitSingleMsg", reason, peer
-      raisePeerDisconnected("Unexpected disconnect", reason)
-    else:
-      debug "Dropped RLPX message",
-        msg = peer.dispatcher.messages[nextMsgId].name
-      # TODO: This is breach of protocol?
-
 proc nextMsg*(peer: Peer, MsgType: type): Future[MsgType] =
   ## This procs awaits a specific RLPx message.
   ## Any messages received while waiting will be dispatched to their
@@ -959,17 +896,24 @@ proc p2pProtocolBackendImpl*(protocol: P2PProtocol): Backend =
                    newLit(protocol.version),
                    protocol.peerInit, protocol.netInit)
 
-
+# TODO change to version 5 when snappy is enabled
-p2pProtocol DevP2P(version = 5, rlpxName = "p2p"):
+p2pProtocol DevP2P(version = 4, rlpxName = "p2p"):
-  proc hello(peer: Peer,
+  proc hello(
-             version: uint64,
+      peer: Peer,
-             clientId: string,
+      version: uint64,
-             capabilities: seq[Capability],
+      clientId: string,
-             listenPort: uint,
+      capabilities: seq[Capability],
-             nodeId: array[RawPublicKeySize, byte])
+      listenPort: uint,
+      nodeId: array[RawPublicKeySize, byte],
+  ) =
+    # The first hello message gets processed during the initial handshake - this
+    # version is used for any subsequent messages
+    await peer.disconnect(BreachOfProtocol, true)
 
   proc sendDisconnectMsg(peer: Peer, reason: DisconnectionReasonList) =
-    trace "disconnect message received", reason=reason.value, peer
+    ## Notify other peer that we're about to disconnect them for the given
+    ## reason
+    trace "disconnect message received", reason = reason.value, peer
     await peer.disconnect(reason.value, false)
 
   # Adding an empty RLP list as the spec defines.
@@ -1046,19 +990,13 @@ proc disconnect*(peer: Peer, reason: DisconnectionReason,
     peer.connectionState = Disconnected
     removePeer(peer.network, peer)
 
-func validatePubKeyInHello(msg: DevP2P.hello, pubKey: PublicKey): bool =
+proc initPeerState*(
-  let pk = PublicKey.fromRaw(msg.nodeId)
+    peer: Peer, capabilities: openArray[Capability]
-  pk.isOk and pk[] == pubKey
+) {.raises: [UselessPeerError].} =
-
+  peer.dispatcher = getDispatcher(peer.network, capabilities).valueOr:
-func checkUselessPeer(peer: Peer) {.raises: [UselessPeerError].} =
+    raise (ref UselessPeerError)(
-  if peer.dispatcher.numProtocols == 0:
+      msg: "No capabilities in common (" & capabilities.mapIt($it).join(",")
-    # XXX: Send disconnect + UselessPeer
+    )
-    raise newException(UselessPeerError, "Useless peer")
-
-proc initPeerState*(peer: Peer, capabilities: openArray[Capability])
-    {.raises: [UselessPeerError].} =
-  peer.dispatcher = getDispatcher(peer.network, capabilities)
-  checkUselessPeer(peer)
 
   # The dispatcher has determined our message ID sequence.
   # For each message ID, we allocate a potential slot for
@@ -1075,6 +1013,7 @@ proc initPeerState*(peer: Peer, capabilities: openArray[Capability])
   peer.initProtocolStates peer.dispatcher.activeProtocols
 
 proc postHelloSteps(peer: Peer, h: DevP2P.hello) {.async.} =
+  peer.clientId = h.clientId
   initPeerState(peer, h.capabilities)
 
   # Please note that the ordering of operations here is important!
@@ -1122,11 +1061,6 @@ proc postHelloSteps(peer: Peer, h: DevP2P.hello) {.async.} =
                                   "messageProcessingLoop ended while connecting")
   peer.connectionState = Connected
 
-template `^`(arr): auto =
-  # passes a stack array with a matching `arrLen`
-  # variable as an open array
-  arr.toOpenArray(0, `arr Len` - 1)
-
 template setSnappySupport(peer: Peer, node: EthereumNode, hello: DevP2P.hello) =
   when useSnappy:
     peer.snappyEnabled = node.protocolVersion >= devp2pSnappyVersion.uint64 and
@@ -1151,277 +1085,225 @@ type
     PeerDisconnectedError,
     TooManyPeersError
 
-proc initiatorHandshake(
+proc helloHandshake(
-    node: EthereumNode, transport: StreamTransport, pubkey: PublicKey
+    node: EthereumNode, peer: Peer
-): Future[ConnectionSecret] {.
+): Future[DevP2P.hello] {.async: (raises: [CancelledError, PeerDisconnected]).} =
-    async: (raises: [CancelledError, TransportError, EthP2PError])
+  ## Negotiate common capabilities using the p2p `hello` message
-.} =
+
-  # https://github.com/ethereum/devp2p/blob/5713591d0366da78a913a811c7502d9ca91d29a8/rlpx.md#initial-handshake
+  # https://github.com/ethereum/devp2p/blob/5713591d0366da78a913a811c7502d9ca91d29a8/rlpx.md#hello-0x00
-  var
+
-    handshake = Handshake.init(node.rng[], node.keys, {Initiator})
+  await peer.send(
-    authMsg: array[AuthMessageMaxEIP8, byte]
+    DevP2P.hello(
+      version: node.baseProtocolVersion(),
+      clientId: node.clientId,
+      capabilities: node.capabilities,
+      listenPort: 0, # obsolete
+      nodeId: node.keys.pubkey.toRaw(),
+    )
+  )
+
+  # The first message received must be a hello or a disconnect
+  var (msgId, msgData) = await peer.recvMsg()
+
+  try:
+    case msgId
+    of msgIdHello:
+      # Implementations must ignore any additional list elements in Hello
+      # because they may be used by a future version.
+      let response = msgData.read(DevP2P.hello)
+      trace "Received Hello", version = response.version, id = response.clientId
+
+      if response.nodeId != peer.transport.pubkey.toRaw:
+        await peer.disconnectAndRaise(
+          BreachOfProtocol, "nodeId in hello does not match RLPx transport identity"
+        )
+
+      return response
+    of msgIdDisconnect: # Disconnection requested by peer
+      # TODO distinguish their reason from ours
+      let reason = msgData.read(DisconnectionReasonList).value
+      await peer.disconnectAndRaise(
+        reason, "Peer disconnecting during hello: " & $reason
+      )
+    else:
+      # No other messages may be sent until a Hello is received.
+      await peer.disconnectAndRaise(BreachOfProtocol, "Expected hello, got " & $msgId)
+  except RlpError:
+    await peer.disconnectAndRaise(BreachOfProtocol, "Could not decode hello RLP")
+
+proc rlpxConnect*(
+    node: EthereumNode, remote: Node
+): Future[Result[Peer, RlpxError]] {.async: (raises: [CancelledError]).} =
+  # TODO move logging elsewhere - the aim is to have exactly _one_ debug log per
+  #      connection attempt (success or failure) to not spam the logs
+  initTracing(devp2pInfo, node.protocols)
+  logScope:
+    remote
+  trace "Connecting to peer"
 
   let
-    authMsgLen = handshake.authMessage(node.rng[], pubkey, authMsg).expect(
+    peer = Peer(remote: remote, network: node)
-        "No errors with correctly sized buffer"
+    deadline = sleepAsync(connectionTimeout)
-      )
 
-    writeRes = await transport.write(addr authMsg[0], authMsgLen)
-  if writeRes != authMsgLen:
-    raisePeerDisconnected("Unexpected disconnect while authenticating", TcpError)
-
-  var ackMsg = newSeqOfCap[byte](1024)
-  ackMsg.setLen(MsgLenLenEIP8)
-  await transport.readExactly(addr ackMsg[0], len(ackMsg))
-
-  let ackMsgLen = handshake.decodeMsgLen(ackMsg).valueOr:
-    raise (ref MalformedMessageError)(
-      msg: "Could not decode handshake ack length: " & $error
-    )
-
-  ackMsg.setLen(ackMsgLen)
-  await transport.readExactly(addr ackMsg[MsgLenLenEIP8], ackMsgLen - MsgLenLenEIP8)
-
-  handshake.decodeAckMessage(ackMsg).isOkOr:
-    raise (ref MalformedMessageError)(msg: "Could not decode handshake ack: " & $error)
-
-  handshake.getSecrets(^authMsg, ackMsg)
-
-proc responderHandshake(
-    node: EthereumNode, transport: StreamTransport
-): Future[(ConnectionSecret, PublicKey)] {.
-    async: (raises: [CancelledError, TransportError, EthP2PError])
-.} =
-  # https://github.com/ethereum/devp2p/blob/5713591d0366da78a913a811c7502d9ca91d29a8/rlpx.md#initial-handshake
-  var
-    handshake = Handshake.init(node.rng[], node.keys, {auth.Responder})
-    authMsg = newSeqOfCap[byte](1024)
-
-  authMsg.setLen(MsgLenLenEIP8)
-  await transport.readExactly(addr authMsg[0], len(authMsg))
-
-  let authMsgLen = handshake.decodeMsgLen(authMsg).valueOr:
-    raise (ref MalformedMessageError)(
-      msg: "Could not decode handshake auth length: " & $error
-    )
-
-  authMsg.setLen(authMsgLen)
-  await transport.readExactly(addr authMsg[MsgLenLenEIP8], authMsgLen - MsgLenLenEIP8)
-
-  handshake.decodeAuthMessage(authMsg).isOkOr:
-    raise (ref MalformedMessageError)(
-      msg: "Could not decode handshake auth message: " & $error
-    )
-
-  var ackMsg: array[AckMessageMaxEIP8, byte]
-  let ackMsgLen = handshake.ackMessage(node.rng[], ackMsg).expect(
-      "no errors with correcly sized buffer"
-    )
-
-  var res = await transport.write(addr ackMsg[0], ackMsgLen)
-  if res != ackMsgLen:
-    raisePeerDisconnected("Unexpected disconnect while authenticating", TcpError)
-
-  (handshake.getSecrets(authMsg, ^ackMsg), handshake.remoteHPubkey)
-
-proc rlpxConnect*(node: EthereumNode, remote: Node):
-    Future[Result[Peer, RlpxError]] {.async.} =
-  # TODO: Should we not set some timeouts on the `connect` and `readExactly`s?
-  # Or should we have a general timeout on the whole rlpxConnect where it gets
-  # called?
-  # Now, some parts could potential hang until a tcp timeout is hit?
-  initTracing(devp2pInfo, node.protocols)
-
-  let peer = Peer(remote: remote, network: node)
-  let ta = initTAddress(remote.node.address.ip, remote.node.address.tcpPort)
   var error = true
 
   defer:
+    deadline.cancelSoon() # Harmless if finished
+
     if error: # TODO: Not sure if I like this much
-      if not isNil(peer.transport):
+      if peer.transport != nil:
-        if not peer.transport.closed:
+        peer.transport.close()
-          peer.transport.close()
 
   peer.transport =
     try:
-      await connect(ta)
+      let ta = initTAddress(remote.node.address.ip, remote.node.address.tcpPort)
-    except TransportError:
+      await RlpxTransport.connect(node.rng, node.keys, ta, remote.node.pubkey).wait(
+        deadline
+      )
+    except AsyncTimeoutError:
+      debug "Connect timeout"
       return err(TransportConnectError)
-    except CatchableError as e:
+    except RlpxTransportError as exc:
-      # Aside from TransportOsError, seems raw CatchableError can also occur?
+      debug "Connect RlpxTransport error", err = exc.msg
-      trace "TCP connect with peer failed", err = $e.name, errMsg = $e.msg
+      return err(ProtocolError)
+    except TransportError as exc:
+      debug "Connect transport error", err = exc.msg
       return err(TransportConnectError)
 
-  try:
-    let secrets = await node.initiatorHandshake(peer.transport, remote.node.pubkey)
-    initSecretState(secrets, peer.secretsState)
-  except TransportError:
-    return err(RlpxHandshakeTransportError)
-  except EthP2PError:
-    return err(RlpxHandshakeError)
-  except CatchableError as e:
-    raiseAssert($e.name & " " & $e.msg)
-
   logConnectedPeer peer
 
   # RLPx p2p capability handshake: After the initial handshake, both sides of
   # the connection must send either Hello or a Disconnect message.
-  let
+  let response =
-    sendHelloFut = peer.hello(
+    try:
-      node.baseProtocolVersion(),
+      await node.helloHandshake(peer).wait(deadline)
-      node.clientId,
+    except AsyncTimeoutError:
-      node.capabilities,
+      debug "Connect handshake timeout"
-      uint(node.address.tcpPort),
+      return err(P2PHandshakeError)
-      node.keys.pubkey.toRaw())
+    except PeerDisconnected as exc:
-
+      debug "Connect handshake disconneced", err = exc.msg, reason = exc.reason
-    receiveHelloFut = peer.waitSingleMsg(DevP2P.hello)
+      case exc.reason
-
+      of TooManyPeers:
-    response =
+        return err(TooManyPeersError)
-      try:
+      else:
-        await peer.handshakeImpl(
-          sendHelloFut,
-          receiveHelloFut,
-          10.seconds)
-      except RlpError:
-        return err(ProtocolError)
-      except PeerDisconnected:
         return err(PeerDisconnectedError)
-        # TODO: Strange compiler error
-        # case e.reason:
-        # of HandshakeTimeout:
-        #   # Yeah, a bit odd but in this case PeerDisconnected comes from a
-        #   # timeout on the P2P Hello message. TODO: Clean-up that handshakeImpl
-        #   return err(P2PHandshakeError)
-        # of TooManyPeers:
-        #   return err(TooManyPeersError)
-        # else:
-        #   return err(PeerDisconnectedError)
-      except TransportError:
-        return err(P2PTransportError)
-      except P2PInternalError:
-        return err(P2PHandshakeError)
-      except CatchableError as e:
-        raiseAssert($e.name & " " & $e.msg)
-
-  if not validatePubKeyInHello(response, remote.node.pubkey):
-    trace "Wrong devp2p identity in Hello message"
-    return err(InvalidIdentityError)
 
   peer.setSnappySupport(node, response)
 
-  trace "DevP2P handshake completed", peer = remote,
+  logScope:
     clientId = response.clientId
 
+  trace "DevP2P handshake completed"
+
   try:
     await postHelloSteps(peer, response)
-  except RlpError:
+  except PeerDisconnected as exc:
-    return err(ProtocolError)
+    debug "Disconnect finishing hello",
-  except PeerDisconnected as e:
+      remote, clientId = response.clientId, err = exc.msg, reason = exc.reason
-    case e.reason:
+    case exc.reason
     of TooManyPeers:
       return err(TooManyPeersError)
     else:
       return err(PeerDisconnectedError)
-  except UselessPeerError:
+  except UselessPeerError as exc:
+    debug "Useless peer finishing hello", err = exc.msg
     return err(UselessRlpxPeerError)
-  except TransportError:
+  except EthP2PError as exc:
-    return err(P2PTransportError)
+    debug "P2P error finishing hello", err = exc.msg
-  except EthP2PError:
     return err(ProtocolError)
   except CatchableError as e:
+    # TODO certainly needs fixing - this could be a cancellation!
     raiseAssert($e.name & " " & $e.msg)
 
-  debug "Peer fully connected", peer = remote, clientId = response.clientId
+  debug "Peer connected", capabilities = response.capabilities
 
   error = false
 
   return ok(peer)
 
 # TODO: rework rlpxAccept similar to rlpxConnect.
-proc rlpxAccept*(
+proc rlpxAccept*(node: EthereumNode, stream: StreamTransport): Future[Peer] {.async.} =
-    node: EthereumNode, transport: StreamTransport): Future[Peer] {.async: (raises: []).} =
+  # TODO move logging elsewhere - the aim is to have exactly _one_ debug log per
+  #      connection attempt (success or failure) to not spam the logs
   initTracing(devp2pInfo, node.protocols)
 
-  let peer = Peer(transport: transport, network: node)
+  let
+    peer = Peer(network: node)
+    remoteAddress = stream.remoteAddress()
+    deadline = sleepAsync(connectionTimeout)
+  trace "Incoming connection", remoteAddress = $remoteAddress
+
   var ok = false
   try:
-    let (secrets, pubkey) = await node.responderHandshake(transport)
+    peer.transport =
-    initSecretState(secrets, peer.secretsState)
+      await RlpxTransport.accept(node.rng, node.keys, stream).wait(deadline)
 
-    let listenPort = transport.localAddress().port
+    let
+      # The ports in this address are not necessarily the ports that the peer is
+      # actually listening on, so we cannot use this information to connect to
+      # the peer in the future!
+      address = Address(
+        ip: remoteAddress.address,
+        tcpPort: remoteAddress.port,
+        udpPort: remoteAddress.port,
+      )
+
+    peer.remote = newNode(ENode(pubkey: peer.transport.pubkey, address: address))
 
     logAcceptedPeer peer
+    logScope:
+      remote = peer.remote
 
-    var sendHelloFut = peer.hello(
+    let response = await node.helloHandshake(peer).wait(deadline)
-      node.baseProtocolVersion(),
-      node.clientId,
-      node.capabilities,
-      listenPort.uint,
-      node.keys.pubkey.toRaw())
-
-    var response = await peer.handshakeImpl(
-      sendHelloFut,
-      peer.waitSingleMsg(DevP2P.hello),
-      10.seconds)
-
-    trace "Received Hello", version=response.version, id=response.clientId
-
-    if not validatePubKeyInHello(response, pubkey):
-      raise (ref MalformedMessageError)(msg: "Wrong pubkey in hello message")
 
     peer.setSnappySupport(node, response)
 
-    let remote = transport.remoteAddress()
+    logScope:
-    let address = Address(ip: remote.address, tcpPort: remote.port,
-                          udpPort: remote.port)
-    peer.remote = newNode(ENode(pubkey: pubkey, address: address))
-
-    trace "devp2p handshake completed", peer = peer.remote,
       clientId = response.clientId
 
+    trace "devp2p handshake completed"
+
     # In case there is an outgoing connection started with this peer we give
     # precedence to that one and we disconnect here with `AlreadyConnected`
     if peer.remote in node.peerPool.connectedNodes or
         peer.remote in node.peerPool.connectingNodes:
       trace "Duplicate connection in rlpxAccept"
-      raisePeerDisconnected("Peer already connecting or connected",
+      raisePeerDisconnected("Peer already connecting or connected", AlreadyConnected)
-                            AlreadyConnected)
 
     node.peerPool.connectingNodes.incl(peer.remote)
 
     await postHelloSteps(peer, response)
     ok = true
-    trace "Peer fully connected", peer = peer.remote, clientId = response.clientId
+    debug "Peer accepted", capabilities = response.capabilities
-  except PeerDisconnected as e:
+  except PeerDisconnected as exc:
-    case e.reason
+    debug "Disconnect while accepting",
-      of AlreadyConnected, TooManyPeers, MessageTimeout:
+      remote = peer.remote, clientId = peer.clientId, reason = exc.reason, err = exc.msg
-        trace "RLPx disconnect", reason = e.reason, peer = peer.remote
-      else:
-        debug "RLPx disconnect unexpected", reason = e.reason,
-          msg = e.msg, peer = peer.remote
 
-    rlpx_accept_failure.inc(labelValues = [$e.reason])
+    rlpx_accept_failure.inc(labelValues = [$exc.reason])
-  except TransportIncompleteError:
+  except TransportIncompleteError as exc:
-    trace "Connection dropped in rlpxAccept", remote = peer.remote
+    trace "Connection dropped in rlpxAccept", remote = peer.remote, err = exc.msg
     rlpx_accept_failure.inc(labelValues = [$TransportIncompleteError])
-  except UselessPeerError:
+  except UselessPeerError as exc:
-    trace "Disconnecting useless peer", peer = peer.remote
+    debug "Useless peer while accepting",
+      remote = peer.remote, clientId = peer.clientId, err = exc.msg
     rlpx_accept_failure.inc(labelValues = [$UselessPeerError])
-  except RlpTypeMismatch as e:
+  except RlpTypeMismatch as exc:
-    # Some peers report capabilities with names longer than 3 chars. We ignore
+    debug "Rlp error while accepting",
-    # those for now. Maybe we should allow this though.
+      remote = peer.remote, clientId = peer.clientId, err = exc.msg
-    trace "Rlp error in rlpxAccept", err = e.msg, errName = e.name
     rlpx_accept_failure.inc(labelValues = [$RlpTypeMismatch])
-  except TransportOsError as e:
+  except TransportOsError as exc:
-    if e.code == OSErrorCode(110):
+    debug "Transport error while accepting",
-      trace "RLPx timeout", err = e.msg, errName = e.name
+      remote = peer.remote, clientId = peer.clientId, err = exc.msg
+    if exc.code == OSErrorCode(110):
       rlpx_accept_failure.inc(labelValues = ["tcp_timeout"])
     else:
-      trace "TransportOsError", err = e.msg, errName = e.name
+      rlpx_accept_failure.inc(labelValues = [$exc.name])
-      rlpx_accept_failure.inc(labelValues = [$e.name])
+  except CatchableError as exc:
-  except CatchableError as e:
+    debug "Error while accepting",
-    trace "RLPx error", err = e.msg, errName = e.name
+      remote = peer.remote, clientId = peer.clientId, err = exc.msg
-    rlpx_accept_failure.inc(labelValues = [$e.name])
+    rlpx_accept_failure.inc(labelValues = [$exc.name])
+
+  deadline.cancelSoon() # Harmless if finished
 
   if not ok:
     if not isNil(peer.transport):
@@ -1432,23 +1314,3 @@ proc rlpxAccept*(
   else:
     rlpx_accept_success.inc()
     return peer
-
-when isMainModule:
-
-  when false:
-    # The assignments below can be used to investigate if the RLPx procs
-    # are considered GcSafe. The short answer is that they aren't, because
-    # they dispatch into user code that might use the GC.
-    type
-      GcSafeDispatchMsg = proc (peer: Peer, msgId: uint64, msgData: var Rlp)
-
-      GcSafeRecvMsg = proc (peer: Peer):
-        Future[tuple[msgId: uint64, msgData: Rlp]] {.gcsafe.}
-
-      GcSafeAccept = proc (transport: StreamTransport, myKeys: KeyPair):
-        Future[Peer] {.gcsafe.}
-
-    var
-      dispatchMsgPtr = invokeThunk
-      recvMsgPtr: GcSafeRecvMsg = recvMsg
-      acceptPtr: GcSafeAccept = rlpxAccept

eth/p2p/rlpxcrypt.nim

@@ -38,7 +38,8 @@ type
     IncompleteError = "rlpx: data incomplete"
     IncorrectArgs = "rlpx: incorrect arguments"
 
-  RlpxHeader* = array[16, byte]
+  RlpxEncryptedHeader* = array[RlpHeaderLength + RlpMacLength, byte]
+  RlpxHeader* = array[RlpHeaderLength, byte]
 
   RlpxResult*[T] = Result[T, RlpxError]
 
@@ -159,21 +160,19 @@ proc encryptMsg*(msg: openArray[byte], secrets: var SecretState): seq[byte] =
 proc getBodySize*(a: RlpxHeader): int =
   (int(a[0]) shl 16) or (int(a[1]) shl 8) or int(a[2])
 
-proc decryptHeader*(c: var SecretState, data: openArray[byte],
+proc decryptHeader*(c: var SecretState, data: openArray[byte]): RlpxResult[RlpxHeader] =
-                    output: var RlpxHeader): RlpxResult[int] =
   ## Decrypts header `data` using SecretState `c` context and store
   ## result into `output`.
   ##
-  ## `header` must be exactly `RlpHeaderLength + RlpMacLength` length.
+  ## `header` must be at least `RlpHeaderLength + RlpMacLength` length.
-  ## `output` must be at least `RlpHeaderLength` length.
+
   var
     tmpmac: keccak256
     aes: array[RlpHeaderLength, byte]
 
-  if len(data) != RlpHeaderLength + RlpMacLength:
+  if len(data) < RlpHeaderLength + RlpMacLength:
     return err(IncompleteError)
-  if len(output) < RlpHeaderLength:
+
-    return err(IncorrectArgs)
   # mac_secret = self.ingress_mac.digest()[:HEADER_LEN]
   tmpmac = c.imac
   var macsec = tmpmac.finish()
@@ -187,14 +186,14 @@ proc decryptHeader*(c: var SecretState, data: openArray[byte],
   tmpmac = c.imac
   var expectMac = tmpmac.finish()
   # if not bytes_eq(expected_header_mac, header_mac):
-  let headerMacPos = RlpHeaderLength
+  if not equalMem(unsafeAddr data[RlpHeaderLength],
-  if not equalMem(cast[pointer](unsafeAddr data[headerMacPos]),
+                  addr expectMac.data[0], RlpMacLength):
-                  cast[pointer](addr expectMac.data[0]), RlpMacLength):
+    return err(IncorrectMac)
-    err(IncorrectMac)
+
-  else:
+  # return self.aes_dec.update(header_ciphertext)
-    # return self.aes_dec.update(header_ciphertext)
+  var output: RlpxHeader
-    c.aesdec.decrypt(toa(data, 0, RlpHeaderLength), output)
+  c.aesdec.decrypt(toa(data, 0, RlpHeaderLength), output)
-    ok(output.getBodySize())
+  ok(output)
 
 proc decryptBody*(c: var SecretState, data: openArray[byte], bodysize: int,
                   output: var openArray[byte]): RlpxResult[void] =

eth/p2p/rlpxtransport.nim

@@ -0,0 +1,243 @@
+# nim-eth
+# Copyright (c) 2018-2024 Status Research & Development GmbH
+# Licensed and distributed under either of
+#   * MIT license (license terms in the root directory or at
+#     https://opensource.org/licenses/MIT).
+#   * Apache v2 license (license terms in the root directory or at
+#     https://www.apache.org/licenses/LICENSE-2.0).
+# at your option. This file may not be copied, modified, or distributed except
+# according to those terms.
+
+{.push raises: [], gcsafe.}
+
+import results, chronos, ../common/keys, ./[auth, rlpxcrypt]
+
+export results, keys
+
+type
+  RlpxTransport* = ref object
+    stream: StreamTransport
+    state: SecretState
+    pubkey*: PublicKey
+
+  RlpxTransportError* = object of CatchableError
+
+template `^`(arr): auto =
+  # passes a stack array with a matching `arrLen` variable as an open array
+  arr.toOpenArray(0, `arr Len` - 1)
+
+proc initiatorHandshake(
+    rng: ref HmacDrbgContext,
+    keys: KeyPair,
+    stream: StreamTransport,
+    remotePubkey: PublicKey,
+): Future[ConnectionSecret] {.
+    async: (raises: [CancelledError, TransportError, RlpxTransportError])
+.} =
+  # https://github.com/ethereum/devp2p/blob/5713591d0366da78a913a811c7502d9ca91d29a8/rlpx.md#initial-handshake
+  var
+    handshake = Handshake.init(rng[], keys, {Initiator})
+    authMsg: array[AuthMessageMaxEIP8, byte]
+
+  let
+    authMsgLen = handshake.authMessage(rng[], remotePubkey, authMsg).expect(
+        "No errors with correctly sized buffer"
+      )
+
+    writeRes = await stream.write(addr authMsg[0], authMsgLen)
+  if writeRes != authMsgLen:
+    raise (ref RlpxTransportError)(msg: "Could not write RLPx handshake header")
+
+  var ackMsg = newSeqOfCap[byte](1024)
+  ackMsg.setLen(MsgLenLenEIP8)
+  await stream.readExactly(addr ackMsg[0], len(ackMsg))
+
+  let ackMsgLen = handshake.decodeAckMsgLen(ackMsg).valueOr:
+    raise
+      (ref RlpxTransportError)(msg: "Could not decode handshake ack length: " & $error)
+
+  ackMsg.setLen(ackMsgLen)
+  await stream.readExactly(addr ackMsg[MsgLenLenEIP8], ackMsgLen - MsgLenLenEIP8)
+
+  handshake.decodeAckMessage(ackMsg).isOkOr:
+    raise (ref RlpxTransportError)(msg: "Could not decode handshake ack: " & $error)
+
+  handshake.getSecrets(^authMsg, ackMsg)
+
+proc responderHandshake(
+    rng: ref HmacDrbgContext, keys: KeyPair, stream: StreamTransport
+): Future[(ConnectionSecret, PublicKey)] {.
+    async: (raises: [CancelledError, TransportError, RlpxTransportError])
+.} =
+  # https://github.com/ethereum/devp2p/blob/5713591d0366da78a913a811c7502d9ca91d29a8/rlpx.md#initial-handshake
+  var
+    handshake = Handshake.init(rng[], keys, {auth.Responder})
+    authMsg = newSeqOfCap[byte](1024)
+
+  authMsg.setLen(MsgLenLenEIP8)
+  await stream.readExactly(addr authMsg[0], len(authMsg))
+
+  let authMsgLen = handshake.decodeAuthMsgLen(authMsg).valueOr:
+    raise
+      (ref RlpxTransportError)(msg: "Could not decode handshake auth length: " & $error)
+
+  authMsg.setLen(authMsgLen)
+  await stream.readExactly(addr authMsg[MsgLenLenEIP8], authMsgLen - MsgLenLenEIP8)
+
+  handshake.decodeAuthMessage(authMsg).isOkOr:
+    raise (ref RlpxTransportError)(
+      msg: "Could not decode handshake auth message: " & $error
+    )
+
+  var ackMsg: array[AckMessageMaxEIP8, byte]
+  let ackMsgLen =
+    handshake.ackMessage(rng[], ackMsg).expect("no errors with correcly sized buffer")
+
+  var res = await stream.write(addr ackMsg[0], ackMsgLen)
+  if res != ackMsgLen:
+    raise (ref RlpxTransportError)(msg: "Could not write RLPx ack message")
+
+  (handshake.getSecrets(authMsg, ^ackMsg), handshake.remoteHPubkey)
+
+proc connect*(
+    _: type RlpxTransport,
+    rng: ref HmacDrbgContext,
+    keys: KeyPair,
+    address: TransportAddress,
+    remotePubkey: PublicKey,
+): Future[RlpxTransport] {.
+    async: (raises: [CancelledError, TransportError, RlpxTransportError])
+.} =
+  var stream = await connect(address)
+
+  try:
+    let secrets = await initiatorHandshake(rng, keys, stream, remotePubkey)
+    var res = RlpxTransport(stream: move(stream), pubkey: remotePubkey)
+    initSecretState(secrets, res.state)
+    res
+  finally:
+    if stream != nil:
+      stream.close()
+
+proc accept*(
+    _: type RlpxTransport,
+    rng: ref HmacDrbgContext,
+    keys: KeyPair,
+    stream: StreamTransport,
+): Future[RlpxTransport] {.
+    async: (raises: [CancelledError, TransportError, RlpxTransportError])
+.} =
+  var stream = stream
+  try:
+    let (secrets, remotePubkey) = await responderHandshake(rng, keys, stream)
+    var res = RlpxTransport(stream: move(stream), pubkey: remotePubkey)
+    initSecretState(secrets, res.state)
+    res
+  finally:
+    if stream != nil:
+      stream.close()
+
+proc recvMsg*(
+    transport: RlpxTransport
+): Future[seq[byte]] {.
+    async: (raises: [CancelledError, TransportError, RlpxTransportError])
+.} =
+  ## Read an RLPx frame from the given peer
+  var msgHeaderEnc: RlpxEncryptedHeader
+  await transport.stream.readExactly(addr msgHeaderEnc[0], msgHeaderEnc.len)
+
+  let msgHeader = decryptHeader(transport.state, msgHeaderEnc).valueOr:
+    raise (ref RlpxTransportError)(msg: "Cannot decrypt RLPx frame header")
+
+  # The capability-id and context id are always zero
+  # https://github.com/ethereum/devp2p/blob/5713591d0366da78a913a811c7502d9ca91d29a8/rlpx.md#framing
+  if (msgHeader[4] != 0x80) or (msgHeader[5] != 0x80):
+    raise
+      (ref RlpxTransportError)(msg: "Invalid capability-id/context-id in RLPx header")
+
+  let msgSize = msgHeader.getBodySize()
+  let remainingBytes = encryptedLength(msgSize) - 32
+
+  var encryptedBytes = newSeq[byte](remainingBytes)
+  await transport.stream.readExactly(addr encryptedBytes[0], len(encryptedBytes))
+
+  let decryptedMaxLength = decryptedLength(msgSize) # Padded length
+  var msgBody = newSeq[byte](decryptedMaxLength)
+
+  if decryptBody(transport.state, encryptedBytes, msgSize, msgBody).isErr():
+    raise (ref RlpxTransportError)(msg: "Cannot decrypt message body")
+
+  reset(encryptedBytes) # Release memory (TODO: in-place decryption)
+
+  msgBody.setLen(msgSize) # Remove padding
+
+  msgBody
+
+proc sendMsg*(
+    transport: RlpxTransport, data: seq[byte]
+) {.async: (raises: [CancelledError, TransportError, RlpxTransportError]).} =
+  let cipherText = encryptMsg(data, transport.state)
+  var res = await transport.stream.write(cipherText)
+  if res != len(cipherText):
+    raise (ref RlpxTransportError)(msg: "Could not complete writing message")
+
+proc remoteAddress*(
+    transport: RlpxTransport
+): TransportAddress {.raises: [TransportOsError].} =
+  transport.stream.remoteAddress()
+
+proc closed*(transport: RlpxTransport): bool =
+  transport.stream != nil and transport.stream.closed
+
+proc close*(transport: RlpxTransport) =
+  if transport.stream != nil:
+    transport.stream.close()
+
+proc closeWait*(
+    transport: RlpxTransport
+): Future[void] {.async: (raises: [], raw: true).} =
+  transport.stream.closeWait()
+
+when isMainModule:
+  # Simple CLI application for negotiating an RLPx connection with a peer
+
+  import stew/byteutils, std/cmdline, std/strutils, eth/rlp
+  if paramCount() < 3:
+    echo "rlpxtransport ip port pubkey"
+    quit 1
+
+  let
+    rng = newRng()
+    kp = KeyPair.random(rng[])
+
+  echo "Local key: ", toHex(kp.pubkey.toRaw())
+
+  let client = waitFor RlpxTransport.connect(
+    rng,
+    kp,
+    initTAddress(paramStr(1), parseInt(paramStr(2))),
+    PublicKey.fromHex(paramStr(3))[],
+  )
+
+  proc encodeMsg(msgId: uint64, msg: auto): seq[byte] =
+    var rlpWriter = initRlpWriter()
+    rlpWriter.append msgId
+    rlpWriter.appendRecordType(msg, typeof(msg).rlpFieldsCount > 1)
+    rlpWriter.finish
+
+  waitFor client.sendMsg(
+    encodeMsg(
+      uint64 0, (uint64 4, "nimbus", @[("eth", uint64 68)], uint64 0, kp.pubkey.toRaw())
+    )
+  )
+
+  while true:
+    echo "Reading message"
+    var data = waitFor client.recvMsg()
+    var rlp = rlpFromBytes(data)
+    let msgId = rlp.read(uint64)
+    if msgId == 0:
+      echo "Hello: ",
+        rlp.read((uint64, string, seq[(string, uint64)], uint64, seq[byte]))
+    else:
+      echo "Unknown message ", msgId, " ", toHex(data)

tests/p2p/all_tests.nim

@@ -6,4 +6,5 @@ import
   ./test_ecies,
   ./test_enode,
   ./test_rlpx_thunk,
+  ./test_rlpxtransport,
   ./test_protocol_handlers

tests/p2p/test_crypt.nim

@@ -159,11 +159,9 @@ suite "Ethereum RLPx encryption/decryption test suite":
     var csecResponder = responder.getSecrets(m0, m1)
     var stateInitiator: SecretState
     var stateResponder: SecretState
-    var iheader, rheader: array[16, byte]
+    var iheader: array[16, byte]
     initSecretState(csecInitiator, stateInitiator)
     initSecretState(csecResponder, stateResponder)
-    burnMem(iheader)
-    burnMem(rheader)
     for i in 1..1000:
       # initiator -> responder
       block:
@@ -176,8 +174,9 @@ suite "Ethereum RLPx encryption/decryption test suite":
           randomBytes(ibody) == len(ibody)
           stateInitiator.encrypt(iheader, ibody,
                                  encrypted).isOk()
-          stateResponder.decryptHeader(toOpenArray(encrypted, 0, 31),
+        let rheader = stateResponder.decryptHeader(
-                                       rheader).isOk()
+          toOpenArray(encrypted, 0, 31)).expect("valid data")
+
         var length = getBodySize(rheader)
         check length == len(ibody)
         var rbody = newSeq[byte](decryptedLength(length))
@@ -190,7 +189,6 @@ suite "Ethereum RLPx encryption/decryption test suite":
           iheader == rheader
           ibody == rbody
         burnMem(iheader)
-        burnMem(rheader)
       # responder -> initiator
       block:
         var ibody = newSeq[byte](i * 3)
@@ -202,8 +200,8 @@ suite "Ethereum RLPx encryption/decryption test suite":
           randomBytes(ibody) == len(ibody)
           stateResponder.encrypt(iheader, ibody,
                                  encrypted).isOk()
-          stateInitiator.decryptHeader(toOpenArray(encrypted, 0, 31),
+        let rheader = stateInitiator.decryptHeader(
-                                       rheader).isOk()
+          toOpenArray(encrypted, 0, 31)).expect("valid data")
         var length = getBodySize(rheader)
         check length == len(ibody)
         var rbody = newSeq[byte](decryptedLength(length))
@@ -216,4 +214,3 @@ suite "Ethereum RLPx encryption/decryption test suite":
           iheader == rheader
           ibody == rbody
         burnMem(iheader)
-        burnMem(rheader)

tests/p2p/test_rlpxtransport.nim

@@ -0,0 +1,60 @@
+{.used.}
+
+import
+  unittest2,
+  chronos/unittest2/asynctests,
+  ../../eth/common/keys,
+  ../../eth/p2p/rlpxtransport
+
+suite "RLPx transport":
+  setup:
+    let
+      rng = newRng()
+      keys1 = KeyPair.random(rng[])
+      keys2 = KeyPair.random(rng[])
+      server = createStreamServer(initTAddress("127.0.0.1:0"), {ReuseAddr})
+
+  teardown:
+    waitFor server.closeWait()
+
+  asyncTest "Connect/accept":
+    const msg = @[byte 0, 1, 2, 3]
+    proc serveClient(server: StreamServer) {.async.} =
+      let transp = await server.accept()
+      let a = await RlpxTransport.accept(rng, keys1, transp)
+      await a.sendMsg(msg)
+      await a.closeWait()
+
+    let serverFut = server.serveClient()
+    defer:
+      await serverFut.wait(1.seconds)
+
+    let client =
+      await RlpxTransport.connect(rng, keys2, server.localAddress(), keys1.pubkey)
+
+    defer:
+      await client.closeWait()
+    let rmsg = await client.recvMsg().wait(1.seconds)
+
+    check:
+      msg == rmsg
+
+    await serverFut
+
+  asyncTest "Detect invalid pubkey":
+    proc serveClient(server: StreamServer) {.async.} =
+      let transp = await server.accept()
+      discard await RlpxTransport.accept(rng, keys1, transp)
+      raiseAssert "should fail to accept due to pubkey error"
+
+    let serverFut = server.serveClient()
+    defer:
+      expect(RlpxTransportError):
+        await serverFut.wait(1.seconds)
+
+    let keys3 = KeyPair.random(rng[])
+
+    # accept side should close connections
+    expect(TransportError):
+      discard
+        await RlpxTransport.connect(rng, keys2, server.localAddress(), keys3.pubkey)

tests/rlp/test_api_usage.nim

@@ -21,8 +21,7 @@ proc test_blockBodyTranscode() =
       transactions: @[
         Transaction(nonce: 1)]),
     BlockBody(
-      uncles: @[
+      uncles: @[Header(nonce: Bytes8([0x20u8,0,0,0,0,0,0,0]))]),
-        BlockHeader(nonce: BlockNonce([0x20u8,0,0,0,0,0,0,0]))]),
     BlockBody(),
     BlockBody(
       transactions: @[