* integration: move REST API tests into their own module
* integration: move upload and download tests into their own module
* integration: move purchasing tests into their own module
* integration: move marketplace tests to the right module
* integration: mine a block *after* starting nodes
To ensure that tests involving multiple nodes do
not start with out-of-sync clocks
* Fix: do not swallow CancellationErrors
* integration: avoid underflow in UInt256
* network: remove unnecessary error handling
No Exceptions can occur, only Defects, because everything
is asyncSpawned.
Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
* network: do not raise in asyncSpawned proc
Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
---------
Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
* refactor multi node test suite
Refactor the multinode test suite into the marketplace test suite.
- Arbitrary number of nodes can be started with each test: clients, providers, validators
- Hardhat can also be started locally with each test, usually for the purpose of saving and inspecting its log file.
- Log files for all nodes can be persisted on disk, with configuration at the test-level
- Log files, if persisted (as specified in the test), will be persisted to a CI artifact
- Node config is specified at the test-level instead of the suite-level
- Node/Hardhat process starting/stopping is now async, and runs much faster
- Per-node config includes:
- simulating proof failures
- logging to file
- log level
- log topics
- storage quota
- debug (print logs to stdout)
- Tests find next available ports when starting nodes, as closing ports on Windows can lag
- Hardhat is no longer required to be running prior to starting the integration tests (as long as Hardhat is configured to run in the tests).
- If Hardhat is already running, a snapshot will be taken and reverted before and after each test, respectively.
- If Hardhat is not already running and configured to run at the test-level, a Hardhat process will be spawned and torn down before and after each test, respectively.
* additional logging for debug purposes
* address PR feedback
- fix spelling
- revert change from catching ProviderError to SignerError -- this should be handled more consistently in the Market abstraction, and will be handled in another PR.
- remove method label from raiseAssert
- remove unused import
* Use API instead of command exec to test for free port
Use chronos `createStreamServer` API to test for free port by binding localhost address and port. Use `ServerFlags.ReuseAddr` to enable reuse of same IP/Port on multiple test runs.
* clean up
* remove upraises annotations from tests
* Update tests to work with updated erasure coding slot sizes
* update dataset size, nodes, tolerance to match valid ec params
Integration tests now have valid dataset sizes (blocks), tolerances, and number of nodes, to work with valid ec params. These values are validated when requested storage.
Print the rest api failure message (via doAssert) when a rest api call fails (eg the rest api may validate some ec params).
All integration tests pass when the async `clock.now` changes are reverted.
* dont use async clock for now
* fix workflow
* move integration logs uplod to reusable
---------
Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
* [docs] fix two client scenario: add missing collateral
* [integration] separate step to wait for node to be started
* [cli] add option to specify ethereum private key
* Remove unused imports
* Fix warnings
* [integration] move type definitions to correct place
* [integration] wait a bit longer for a node to start in debug mode
When e.g. running against Taiko test net rpc, the node start
takes longer
* [integration] simplify handling of codex node and client
* [integration] add Taiko integration test
* [contracts] await token approval confirmation before next tx
* [contracts] deployment address of marketplace on Taiko
* [cli] --eth-private-key now takes a file name
Instead of supplying the private key on the command line,
expect the private key to be in a file with the correct
permissions.
* [utils] Fixes undeclared `activeChroniclesStream` on Windows
* [build] update nim-ethers to include PR #52
Co-authored-by: Eric Mastro <eric.mastro@gmail.com>
* [cli] Better error messages when reading eth private key
Co-authored-by: Eric Mastro <eric.mastro@gmail.com>
* [integration] simplify reading of cmd line arguments
Co-authored-by: Eric Mastro <eric.mastro@gmail.com>
* [build] update to latest version of nim-ethers
* [contracts] updated contract address for Taiko L2
* [build] update codex contracts to latest version
---------
Co-authored-by: Eric Mastro <eric.mastro@gmail.com>
* [build] fix: ignore logging when running singular tests
Ensures that logging is ignored at runtime when running
individual tests using `nim c -r tests/...`
* [build] Allow tests to be run with -d:chronicles_log_level
When running tests with chronicles_log_level set, do not
hide the the logs.
* [build] disable XCannotRaiseY hint
There are too many {.raises:[Defect].} in the
libraries that we use, drowning out all other
warnings and hints
* [build] disable BareExcept warning
Not yet enabled in a released version of Nim,
so libraries that we depend on have not fixed
this yet, drowning out our own hints and warnings
* [build] disable DotLikeOps warning
dot-like ops were an experiment that is not going
land in Nim
* [build] compile log statements in tests
When running tests, all log statements are compiled.
They are filtered out at runtime during a test run.
* [build] do not build executable when running unit test
It's already built in the integration test
* [build] Fix warnings
- remove unused code
- remove unused imports
- stop using deprecated stuff
* [build] Put compiler flags behind nim version checks
* [CI] remove Nim 1.2 compatibility
* setting up
* Implements timer utility
* applies async and cancellation to timer loop
* Sets up mocktimer and mockblockstore to set up first maintenance module test
* wip: first test that calls blockChecker
* wip: adding user type to timer callback
* Chronicles doesn't like type-arguments? Disables logging in timer module for now
* Implementing block check test for blockMaintainer module
* Sets up additional tests for blockmaintainer
* Removes generic from timer module. Implements numberOfBlocks per interval in blockMaintainer.
* Implements blockMaintainer
* Sets up tests for blockChecker
* Some comments by Mark
* Cleanup repostore tests
* Setting up the use of std/times for block TTL tracking
* repostore adds expiration timestamp
* Defaults the repostore clock to the system clock
* Applies updates to repostore interface.
* Implements retrieving of block expiration information from repostore
* Sets up tests for maintenance module behavior
* Implements block maintenance module
* Wires maintenance module into codex. Sets up integration tests for block expiration
* Sets up test for missing behavior: removing timestamp metadata on block delete
* Implements removing of expiration metadata in repoStore
* Fixes integration tests for block expiration
* Adds block expiration tests to integration test run
* Handled some comments by Dmitriy
* Review comment by Dmitriy: Removes seq[cid] from runBlockCheck
* Review comment by Dmitriy: Moves key formatting methods to keyutils.
* Review comment by Dmitriy: Encodes durations using chronos
* Fixes conversion of TTL type in conf.
* Review comments by Dmitriy
* Adds unit tests for keyUtils.
* Adds test coverage for exception in maintenance module
* [purchasing] Simplify test
* [utils] Move StorageRequest.example up one level
* [purchasing] Load purchases from market
* [purchasing] load purchase states
* Implement myRequest() and getState() methods for OnChainMarket
* [proofs] Fix intermittently failing tests
Ensures that examples of proofs in tests are never of length 0;
these are considered invalid proofs by the smart contract logic.
* [contracts] Fix failing test
With the new solidity contracts update, a contract can only
be paid out after it started.
* [market] Add method to get request end time
* [purchasing] wait until purchase is finished
Purchase.wait() would previously wait until purchase
was started, now we wait until it is finished.
* [purchasing] Handle 'finished' and 'failed' states
* [marketplace] move to failed state once request fails
- Add support for subscribing to request failure events.
- Add supporting contract tests for subscribing to request failure events.
- Allow the PurchaseStarted state to move to PurchaseFailure once a request failure event is emitted
- Add supporting tests for moving from PurchaseStarted to PurchaseFailure
- Add state transition tests for PurchaseUnknown.
* [marketplace] Fix test with longer sleepAsync
* [integration] Add function to restart a codex node
* [purchasing] Set client address before requesting storage
To prevent the purchase id (which equals the request id)
from changing once it's been submitted.
* [contracts] Fix: OnChainMarket.getState()
Had the wrong method signature before
* [purchasing] Load purchases on node start
* [purchasing] Rename state 'PurchaseError' to 'PurchaseErrored'
Allows for an exception type called 'PurchaseError'
* [purchasing] Load purchases in background
No longer calls market.getRequest() for every purchase
on node start.
* [contracts] Add `$` for RequestId, SlotId and Nonce
To aid with debugging
* [purchasing] Add Purchasing.stop()
To ensure that all contract interactions have both a
start() and a stop() for
* [tests] Remove sleepAsync where possible
Use `eventually` loop instead, to make sure that we're
not waiting unnecessarily.
* [integration] Fix: handle non-json response in test
* [purchasing] Add purchase state to json
* [integration] Ensure that purchase is submitted before restart
Fixes test failure on slower CI
* [purchasing] re-implement `description` as method
Allows description to be set in the same module where the
state type is defined.
Co-authored-by: Eric Mastro <eric.mastro@gmail.com>
* [contracts] fix typo
Co-authored-by: Eric Mastro <eric.mastro@gmail.com>
* [market] Use more generic error type
Should we decide to change the provider type later
Co-authored-by: Eric Mastro <eric.mastro@gmail.com>
Co-authored-by: Eric Mastro <eric.mastro@gmail.com>
* setup and persist private key
* return dht record spr
* helper to remap multiaddr ip and port
* set/update discovery and announce addrs
* add nat and discovery IPs
* allow for announce and DHT addresses separatelly
* update tests
* check for nat or discoveryIp
* fix integration tests
* misc align
* don't share data dirs and and set bootstrap node
* add log scope
* remap announceAddrs after node start
* simplify discovery initialization
* make nat and disc-ip required
* add log scope don't init dht spr in constructor
* bump dht
* dissallow `0.0.0.0` for `--nat`
Increase blocksize from ~8KiB to ~64KiB and remove useless unbounded prefetching on download
* increased upload/download speed on my Win10 Zen3 box to 50/150 MB/s (with FSStore)
* made manifest files 8x smaller
* two more changes in the tests to make them pass
Closes#263
* [contracts] ContractInteractions.new() now requires account parameter
* [cli] Only perform Ethereum interactions when --eth-account is specified
* [cli] Add --persistence option that is disabled by default
* [cli] Use Option for ethDeployment parameter
* [node] Better error reporting when Ethereum node cannot be reached
`waitFor` has been moved into the main body of integration test
`nodes negotiate ...` to reduce blockage on the main thread. That change, along
with widening the expiry in `when defined(windows)` (and bumping up
`timeout-minutes` in our CI workflow) allows Windows CI builds to succeed more
consistently, i.e. without timing out.
markspanbroek
Eric
Ben Bierens
Dmitriy Ryajov
Bulat-Ziganshin
Michael Bradley, Jr