refactor: multinode integration test refactor (#662)
* refactor multi node test suite
Refactor the multinode test suite into the marketplace test suite.
- Arbitrary number of nodes can be started with each test: clients, providers, validators
- Hardhat can also be started locally with each test, usually for the purpose of saving and inspecting its log file.
- Log files for all nodes can be persisted on disk, with configuration at the test-level
- Log files, if persisted (as specified in the test), will be persisted to a CI artifact
- Node config is specified at the test-level instead of the suite-level
- Node/Hardhat process starting/stopping is now async, and runs much faster
- Per-node config includes:
- simulating proof failures
- logging to file
- log level
- log topics
- storage quota
- debug (print logs to stdout)
- Tests find next available ports when starting nodes, as closing ports on Windows can lag
- Hardhat is no longer required to be running prior to starting the integration tests (as long as Hardhat is configured to run in the tests).
- If Hardhat is already running, a snapshot will be taken and reverted before and after each test, respectively.
- If Hardhat is not already running and configured to run at the test-level, a Hardhat process will be spawned and torn down before and after each test, respectively.
* additional logging for debug purposes
* address PR feedback
- fix spelling
- revert change from catching ProviderError to SignerError -- this should be handled more consistently in the Market abstraction, and will be handled in another PR.
- remove method label from raiseAssert
- remove unused import
* Use API instead of command exec to test for free port
Use chronos `createStreamServer` API to test for free port by binding localhost address and port. Use `ServerFlags.ReuseAddr` to enable reuse of same IP/Port on multiple test runs.
* clean up
* remove upraises annotations from tests
* Update tests to work with updated erasure coding slot sizes
* update dataset size, nodes, tolerance to match valid ec params
Integration tests now have valid dataset sizes (blocks), tolerances, and number of nodes, to work with valid ec params. These values are validated when requested storage.
Print the rest api failure message (via doAssert) when a rest api call fails (eg the rest api may validate some ec params).
All integration tests pass when the async `clock.now` changes are reverted.
* dont use async clock for now
* fix workflow
* move integration logs uplod to reusable
---------
Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
2024-02-19 04:55:39 +00:00
|
|
|
import std/math
|
|
|
|
from std/times import inMilliseconds
|
feat: create logging proxy (#663)
* implement a logging proxy
The logging proxy:
- prevents the need to import chronicles (as well as export except toJson),
- prevents the need to override `writeValue` or use or import nim-json-seralization elsewhere in the codebase, allowing for sole use of utils/json for de/serialization,
- and handles json formatting correctly in chronicles json sinks
* Rename logging -> logutils to avoid ambiguity with common names
* clean up
* add setProperty for JsonRecord, remove nim-json-serialization conflict
* Allow specifying textlines and json format separately
Not specifying a LogFormat will apply the formatting to both textlines and json sinks.
Specifying a LogFormat will apply the formatting to only that sink.
* remove unneeded usages of std/json
We only need to import utils/json instead of std/json
* move serialization from rest/json to utils/json so it can be shared
* fix NoColors ambiguity
Was causing unit tests to fail on Windows.
* Remove nre usage to fix Windows error
Windows was erroring with `could not load: pcre64.dll`. Instead of fixing that error, remove the pcre usage :)
* Add logutils module doc
* Shorten logutils.formatIt for `NBytes`
Both json and textlines formatIt were not needed, and could be combined into one formatIt
* remove debug integration test config
debug output and logformat of json for integration test logs
* Use ## module doc to support docgen
* bump nim-poseidon2 to export fromBytes
Before the changes in this branch, fromBytes was likely being resolved by nim-stew, or other dependency. With the changes in this branch, that dependency was removed and fromBytes could no longer be resolved. By exporting fromBytes from nim-poseidon, the correct resolution is now happening.
* fixes to get compiling after rebasing master
* Add support for Result types being logged using formatIt
2024-01-23 07:35:03 +00:00
|
|
|
import pkg/codex/logutils
|
refactor: multinode integration test refactor (#662)
* refactor multi node test suite
Refactor the multinode test suite into the marketplace test suite.
- Arbitrary number of nodes can be started with each test: clients, providers, validators
- Hardhat can also be started locally with each test, usually for the purpose of saving and inspecting its log file.
- Log files for all nodes can be persisted on disk, with configuration at the test-level
- Log files, if persisted (as specified in the test), will be persisted to a CI artifact
- Node config is specified at the test-level instead of the suite-level
- Node/Hardhat process starting/stopping is now async, and runs much faster
- Per-node config includes:
- simulating proof failures
- logging to file
- log level
- log topics
- storage quota
- debug (print logs to stdout)
- Tests find next available ports when starting nodes, as closing ports on Windows can lag
- Hardhat is no longer required to be running prior to starting the integration tests (as long as Hardhat is configured to run in the tests).
- If Hardhat is already running, a snapshot will be taken and reverted before and after each test, respectively.
- If Hardhat is not already running and configured to run at the test-level, a Hardhat process will be spawned and torn down before and after each test, respectively.
* additional logging for debug purposes
* address PR feedback
- fix spelling
- revert change from catching ProviderError to SignerError -- this should be handled more consistently in the Market abstraction, and will be handled in another PR.
- remove method label from raiseAssert
- remove unused import
* Use API instead of command exec to test for free port
Use chronos `createStreamServer` API to test for free port by binding localhost address and port. Use `ServerFlags.ReuseAddr` to enable reuse of same IP/Port on multiple test runs.
* clean up
* remove upraises annotations from tests
* Update tests to work with updated erasure coding slot sizes
* update dataset size, nodes, tolerance to match valid ec params
Integration tests now have valid dataset sizes (blocks), tolerances, and number of nodes, to work with valid ec params. These values are validated when requested storage.
Print the rest api failure message (via doAssert) when a rest api call fails (eg the rest api may validate some ec params).
All integration tests pass when the async `clock.now` changes are reverted.
* dont use async clock for now
* fix workflow
* move integration logs uplod to reusable
---------
Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
2024-02-19 04:55:39 +00:00
|
|
|
import pkg/stew/byteutils
|
2023-03-27 13:47:25 +00:00
|
|
|
import ../contracts/time
|
2023-05-03 07:24:25 +00:00
|
|
|
import ../contracts/deployment
|
refactor: multinode integration test refactor (#662)
* refactor multi node test suite
Refactor the multinode test suite into the marketplace test suite.
- Arbitrary number of nodes can be started with each test: clients, providers, validators
- Hardhat can also be started locally with each test, usually for the purpose of saving and inspecting its log file.
- Log files for all nodes can be persisted on disk, with configuration at the test-level
- Log files, if persisted (as specified in the test), will be persisted to a CI artifact
- Node config is specified at the test-level instead of the suite-level
- Node/Hardhat process starting/stopping is now async, and runs much faster
- Per-node config includes:
- simulating proof failures
- logging to file
- log level
- log topics
- storage quota
- debug (print logs to stdout)
- Tests find next available ports when starting nodes, as closing ports on Windows can lag
- Hardhat is no longer required to be running prior to starting the integration tests (as long as Hardhat is configured to run in the tests).
- If Hardhat is already running, a snapshot will be taken and reverted before and after each test, respectively.
- If Hardhat is not already running and configured to run at the test-level, a Hardhat process will be spawned and torn down before and after each test, respectively.
* additional logging for debug purposes
* address PR feedback
- fix spelling
- revert change from catching ProviderError to SignerError -- this should be handled more consistently in the Market abstraction, and will be handled in another PR.
- remove method label from raiseAssert
- remove unused import
* Use API instead of command exec to test for free port
Use chronos `createStreamServer` API to test for free port by binding localhost address and port. Use `ServerFlags.ReuseAddr` to enable reuse of same IP/Port on multiple test runs.
* clean up
* remove upraises annotations from tests
* Update tests to work with updated erasure coding slot sizes
* update dataset size, nodes, tolerance to match valid ec params
Integration tests now have valid dataset sizes (blocks), tolerances, and number of nodes, to work with valid ec params. These values are validated when requested storage.
Print the rest api failure message (via doAssert) when a rest api call fails (eg the rest api may validate some ec params).
All integration tests pass when the async `clock.now` changes are reverted.
* dont use async clock for now
* fix workflow
* move integration logs uplod to reusable
---------
Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
2024-02-19 04:55:39 +00:00
|
|
|
import ../codex/helpers
|
|
|
|
import ../examples
|
|
|
|
import ./marketplacesuite
|
|
|
|
|
|
|
|
export chronicles
|
2023-06-22 10:32:18 +00:00
|
|
|
|
|
|
|
logScope:
|
refactor: multinode integration test refactor (#662)
* refactor multi node test suite
Refactor the multinode test suite into the marketplace test suite.
- Arbitrary number of nodes can be started with each test: clients, providers, validators
- Hardhat can also be started locally with each test, usually for the purpose of saving and inspecting its log file.
- Log files for all nodes can be persisted on disk, with configuration at the test-level
- Log files, if persisted (as specified in the test), will be persisted to a CI artifact
- Node config is specified at the test-level instead of the suite-level
- Node/Hardhat process starting/stopping is now async, and runs much faster
- Per-node config includes:
- simulating proof failures
- logging to file
- log level
- log topics
- storage quota
- debug (print logs to stdout)
- Tests find next available ports when starting nodes, as closing ports on Windows can lag
- Hardhat is no longer required to be running prior to starting the integration tests (as long as Hardhat is configured to run in the tests).
- If Hardhat is already running, a snapshot will be taken and reverted before and after each test, respectively.
- If Hardhat is not already running and configured to run at the test-level, a Hardhat process will be spawned and torn down before and after each test, respectively.
* additional logging for debug purposes
* address PR feedback
- fix spelling
- revert change from catching ProviderError to SignerError -- this should be handled more consistently in the Market abstraction, and will be handled in another PR.
- remove method label from raiseAssert
- remove unused import
* Use API instead of command exec to test for free port
Use chronos `createStreamServer` API to test for free port by binding localhost address and port. Use `ServerFlags.ReuseAddr` to enable reuse of same IP/Port on multiple test runs.
* clean up
* remove upraises annotations from tests
* Update tests to work with updated erasure coding slot sizes
* update dataset size, nodes, tolerance to match valid ec params
Integration tests now have valid dataset sizes (blocks), tolerances, and number of nodes, to work with valid ec params. These values are validated when requested storage.
Print the rest api failure message (via doAssert) when a rest api call fails (eg the rest api may validate some ec params).
All integration tests pass when the async `clock.now` changes are reverted.
* dont use async clock for now
* fix workflow
* move integration logs uplod to reusable
---------
Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
2024-02-19 04:55:39 +00:00
|
|
|
topics = "integration test proofs"
|
2023-03-27 13:47:25 +00:00
|
|
|
|
2024-02-07 06:50:35 +00:00
|
|
|
|
refactor: multinode integration test refactor (#662)
* refactor multi node test suite
Refactor the multinode test suite into the marketplace test suite.
- Arbitrary number of nodes can be started with each test: clients, providers, validators
- Hardhat can also be started locally with each test, usually for the purpose of saving and inspecting its log file.
- Log files for all nodes can be persisted on disk, with configuration at the test-level
- Log files, if persisted (as specified in the test), will be persisted to a CI artifact
- Node config is specified at the test-level instead of the suite-level
- Node/Hardhat process starting/stopping is now async, and runs much faster
- Per-node config includes:
- simulating proof failures
- logging to file
- log level
- log topics
- storage quota
- debug (print logs to stdout)
- Tests find next available ports when starting nodes, as closing ports on Windows can lag
- Hardhat is no longer required to be running prior to starting the integration tests (as long as Hardhat is configured to run in the tests).
- If Hardhat is already running, a snapshot will be taken and reverted before and after each test, respectively.
- If Hardhat is not already running and configured to run at the test-level, a Hardhat process will be spawned and torn down before and after each test, respectively.
* additional logging for debug purposes
* address PR feedback
- fix spelling
- revert change from catching ProviderError to SignerError -- this should be handled more consistently in the Market abstraction, and will be handled in another PR.
- remove method label from raiseAssert
- remove unused import
* Use API instead of command exec to test for free port
Use chronos `createStreamServer` API to test for free port by binding localhost address and port. Use `ServerFlags.ReuseAddr` to enable reuse of same IP/Port on multiple test runs.
* clean up
* remove upraises annotations from tests
* Update tests to work with updated erasure coding slot sizes
* update dataset size, nodes, tolerance to match valid ec params
Integration tests now have valid dataset sizes (blocks), tolerances, and number of nodes, to work with valid ec params. These values are validated when requested storage.
Print the rest api failure message (via doAssert) when a rest api call fails (eg the rest api may validate some ec params).
All integration tests pass when the async `clock.now` changes are reverted.
* dont use async clock for now
* fix workflow
* move integration logs uplod to reusable
---------
Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
2024-02-19 04:55:39 +00:00
|
|
|
marketplacesuite "Hosts submit regular proofs":
|
2023-04-19 13:06:00 +00:00
|
|
|
|
refactor: multinode integration test refactor (#662)
* refactor multi node test suite
Refactor the multinode test suite into the marketplace test suite.
- Arbitrary number of nodes can be started with each test: clients, providers, validators
- Hardhat can also be started locally with each test, usually for the purpose of saving and inspecting its log file.
- Log files for all nodes can be persisted on disk, with configuration at the test-level
- Log files, if persisted (as specified in the test), will be persisted to a CI artifact
- Node config is specified at the test-level instead of the suite-level
- Node/Hardhat process starting/stopping is now async, and runs much faster
- Per-node config includes:
- simulating proof failures
- logging to file
- log level
- log topics
- storage quota
- debug (print logs to stdout)
- Tests find next available ports when starting nodes, as closing ports on Windows can lag
- Hardhat is no longer required to be running prior to starting the integration tests (as long as Hardhat is configured to run in the tests).
- If Hardhat is already running, a snapshot will be taken and reverted before and after each test, respectively.
- If Hardhat is not already running and configured to run at the test-level, a Hardhat process will be spawned and torn down before and after each test, respectively.
* additional logging for debug purposes
* address PR feedback
- fix spelling
- revert change from catching ProviderError to SignerError -- this should be handled more consistently in the Market abstraction, and will be handled in another PR.
- remove method label from raiseAssert
- remove unused import
* Use API instead of command exec to test for free port
Use chronos `createStreamServer` API to test for free port by binding localhost address and port. Use `ServerFlags.ReuseAddr` to enable reuse of same IP/Port on multiple test runs.
* clean up
* remove upraises annotations from tests
* Update tests to work with updated erasure coding slot sizes
* update dataset size, nodes, tolerance to match valid ec params
Integration tests now have valid dataset sizes (blocks), tolerances, and number of nodes, to work with valid ec params. These values are validated when requested storage.
Print the rest api failure message (via doAssert) when a rest api call fails (eg the rest api may validate some ec params).
All integration tests pass when the async `clock.now` changes are reverted.
* dont use async clock for now
* fix workflow
* move integration logs uplod to reusable
---------
Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
2024-02-19 04:55:39 +00:00
|
|
|
test "hosts submit periodic proofs for slots they fill", NodeConfigs(
|
|
|
|
# Uncomment to start Hardhat automatically, typically so logs can be inspected locally
|
|
|
|
# hardhat: HardhatConfig().withLogFile(),
|
2023-03-27 13:47:25 +00:00
|
|
|
|
refactor: multinode integration test refactor (#662)
* refactor multi node test suite
Refactor the multinode test suite into the marketplace test suite.
- Arbitrary number of nodes can be started with each test: clients, providers, validators
- Hardhat can also be started locally with each test, usually for the purpose of saving and inspecting its log file.
- Log files for all nodes can be persisted on disk, with configuration at the test-level
- Log files, if persisted (as specified in the test), will be persisted to a CI artifact
- Node config is specified at the test-level instead of the suite-level
- Node/Hardhat process starting/stopping is now async, and runs much faster
- Per-node config includes:
- simulating proof failures
- logging to file
- log level
- log topics
- storage quota
- debug (print logs to stdout)
- Tests find next available ports when starting nodes, as closing ports on Windows can lag
- Hardhat is no longer required to be running prior to starting the integration tests (as long as Hardhat is configured to run in the tests).
- If Hardhat is already running, a snapshot will be taken and reverted before and after each test, respectively.
- If Hardhat is not already running and configured to run at the test-level, a Hardhat process will be spawned and torn down before and after each test, respectively.
* additional logging for debug purposes
* address PR feedback
- fix spelling
- revert change from catching ProviderError to SignerError -- this should be handled more consistently in the Market abstraction, and will be handled in another PR.
- remove method label from raiseAssert
- remove unused import
* Use API instead of command exec to test for free port
Use chronos `createStreamServer` API to test for free port by binding localhost address and port. Use `ServerFlags.ReuseAddr` to enable reuse of same IP/Port on multiple test runs.
* clean up
* remove upraises annotations from tests
* Update tests to work with updated erasure coding slot sizes
* update dataset size, nodes, tolerance to match valid ec params
Integration tests now have valid dataset sizes (blocks), tolerances, and number of nodes, to work with valid ec params. These values are validated when requested storage.
Print the rest api failure message (via doAssert) when a rest api call fails (eg the rest api may validate some ec params).
All integration tests pass when the async `clock.now` changes are reverted.
* dont use async clock for now
* fix workflow
* move integration logs uplod to reusable
---------
Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
2024-02-19 04:55:39 +00:00
|
|
|
clients:
|
|
|
|
CodexConfig()
|
|
|
|
.nodes(1)
|
|
|
|
# .debug() # uncomment to enable console log output
|
|
|
|
.withLogFile() # uncomment to output log file to tests/integration/logs/<start_datetime> <suite_name>/<test_name>/<node_role>_<node_idx>.log
|
|
|
|
.withLogTopics("node"),
|
2023-09-01 05:44:41 +00:00
|
|
|
|
refactor: multinode integration test refactor (#662)
* refactor multi node test suite
Refactor the multinode test suite into the marketplace test suite.
- Arbitrary number of nodes can be started with each test: clients, providers, validators
- Hardhat can also be started locally with each test, usually for the purpose of saving and inspecting its log file.
- Log files for all nodes can be persisted on disk, with configuration at the test-level
- Log files, if persisted (as specified in the test), will be persisted to a CI artifact
- Node config is specified at the test-level instead of the suite-level
- Node/Hardhat process starting/stopping is now async, and runs much faster
- Per-node config includes:
- simulating proof failures
- logging to file
- log level
- log topics
- storage quota
- debug (print logs to stdout)
- Tests find next available ports when starting nodes, as closing ports on Windows can lag
- Hardhat is no longer required to be running prior to starting the integration tests (as long as Hardhat is configured to run in the tests).
- If Hardhat is already running, a snapshot will be taken and reverted before and after each test, respectively.
- If Hardhat is not already running and configured to run at the test-level, a Hardhat process will be spawned and torn down before and after each test, respectively.
* additional logging for debug purposes
* address PR feedback
- fix spelling
- revert change from catching ProviderError to SignerError -- this should be handled more consistently in the Market abstraction, and will be handled in another PR.
- remove method label from raiseAssert
- remove unused import
* Use API instead of command exec to test for free port
Use chronos `createStreamServer` API to test for free port by binding localhost address and port. Use `ServerFlags.ReuseAddr` to enable reuse of same IP/Port on multiple test runs.
* clean up
* remove upraises annotations from tests
* Update tests to work with updated erasure coding slot sizes
* update dataset size, nodes, tolerance to match valid ec params
Integration tests now have valid dataset sizes (blocks), tolerances, and number of nodes, to work with valid ec params. These values are validated when requested storage.
Print the rest api failure message (via doAssert) when a rest api call fails (eg the rest api may validate some ec params).
All integration tests pass when the async `clock.now` changes are reverted.
* dont use async clock for now
* fix workflow
* move integration logs uplod to reusable
---------
Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
2024-02-19 04:55:39 +00:00
|
|
|
providers:
|
|
|
|
CodexConfig()
|
|
|
|
.nodes(1)
|
|
|
|
# .debug() # uncomment to enable console log output
|
|
|
|
.withLogFile() # uncomment to output log file to tests/integration/logs/<start_datetime> <suite_name>/<test_name>/<node_role>_<node_idx>.log
|
|
|
|
.withLogTopics("marketplace", "sales", "reservations", "node"),
|
|
|
|
):
|
|
|
|
let client0 = clients()[0].client
|
|
|
|
let totalPeriods = 50
|
|
|
|
let datasetSizeInBlocks = 2
|
2023-04-14 09:04:17 +00:00
|
|
|
|
refactor: multinode integration test refactor (#662)
* refactor multi node test suite
Refactor the multinode test suite into the marketplace test suite.
- Arbitrary number of nodes can be started with each test: clients, providers, validators
- Hardhat can also be started locally with each test, usually for the purpose of saving and inspecting its log file.
- Log files for all nodes can be persisted on disk, with configuration at the test-level
- Log files, if persisted (as specified in the test), will be persisted to a CI artifact
- Node config is specified at the test-level instead of the suite-level
- Node/Hardhat process starting/stopping is now async, and runs much faster
- Per-node config includes:
- simulating proof failures
- logging to file
- log level
- log topics
- storage quota
- debug (print logs to stdout)
- Tests find next available ports when starting nodes, as closing ports on Windows can lag
- Hardhat is no longer required to be running prior to starting the integration tests (as long as Hardhat is configured to run in the tests).
- If Hardhat is already running, a snapshot will be taken and reverted before and after each test, respectively.
- If Hardhat is not already running and configured to run at the test-level, a Hardhat process will be spawned and torn down before and after each test, respectively.
* additional logging for debug purposes
* address PR feedback
- fix spelling
- revert change from catching ProviderError to SignerError -- this should be handled more consistently in the Market abstraction, and will be handled in another PR.
- remove method label from raiseAssert
- remove unused import
* Use API instead of command exec to test for free port
Use chronos `createStreamServer` API to test for free port by binding localhost address and port. Use `ServerFlags.ReuseAddr` to enable reuse of same IP/Port on multiple test runs.
* clean up
* remove upraises annotations from tests
* Update tests to work with updated erasure coding slot sizes
* update dataset size, nodes, tolerance to match valid ec params
Integration tests now have valid dataset sizes (blocks), tolerances, and number of nodes, to work with valid ec params. These values are validated when requested storage.
Print the rest api failure message (via doAssert) when a rest api call fails (eg the rest api may validate some ec params).
All integration tests pass when the async `clock.now` changes are reverted.
* dont use async clock for now
* fix workflow
* move integration logs uplod to reusable
---------
Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
2024-02-19 04:55:39 +00:00
|
|
|
let data = await RandomChunker.example(blocks=1)
|
|
|
|
createAvailabilities(data.len, totalPeriods.periods)
|
2023-03-27 13:47:25 +00:00
|
|
|
|
refactor: multinode integration test refactor (#662)
* refactor multi node test suite
Refactor the multinode test suite into the marketplace test suite.
- Arbitrary number of nodes can be started with each test: clients, providers, validators
- Hardhat can also be started locally with each test, usually for the purpose of saving and inspecting its log file.
- Log files for all nodes can be persisted on disk, with configuration at the test-level
- Log files, if persisted (as specified in the test), will be persisted to a CI artifact
- Node config is specified at the test-level instead of the suite-level
- Node/Hardhat process starting/stopping is now async, and runs much faster
- Per-node config includes:
- simulating proof failures
- logging to file
- log level
- log topics
- storage quota
- debug (print logs to stdout)
- Tests find next available ports when starting nodes, as closing ports on Windows can lag
- Hardhat is no longer required to be running prior to starting the integration tests (as long as Hardhat is configured to run in the tests).
- If Hardhat is already running, a snapshot will be taken and reverted before and after each test, respectively.
- If Hardhat is not already running and configured to run at the test-level, a Hardhat process will be spawned and torn down before and after each test, respectively.
* additional logging for debug purposes
* address PR feedback
- fix spelling
- revert change from catching ProviderError to SignerError -- this should be handled more consistently in the Market abstraction, and will be handled in another PR.
- remove method label from raiseAssert
- remove unused import
* Use API instead of command exec to test for free port
Use chronos `createStreamServer` API to test for free port by binding localhost address and port. Use `ServerFlags.ReuseAddr` to enable reuse of same IP/Port on multiple test runs.
* clean up
* remove upraises annotations from tests
* Update tests to work with updated erasure coding slot sizes
* update dataset size, nodes, tolerance to match valid ec params
Integration tests now have valid dataset sizes (blocks), tolerances, and number of nodes, to work with valid ec params. These values are validated when requested storage.
Print the rest api failure message (via doAssert) when a rest api call fails (eg the rest api may validate some ec params).
All integration tests pass when the async `clock.now` changes are reverted.
* dont use async clock for now
* fix workflow
* move integration logs uplod to reusable
---------
Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
2024-02-19 04:55:39 +00:00
|
|
|
let cid = client0.upload(data).get
|
2023-03-27 13:47:25 +00:00
|
|
|
|
refactor: multinode integration test refactor (#662)
* refactor multi node test suite
Refactor the multinode test suite into the marketplace test suite.
- Arbitrary number of nodes can be started with each test: clients, providers, validators
- Hardhat can also be started locally with each test, usually for the purpose of saving and inspecting its log file.
- Log files for all nodes can be persisted on disk, with configuration at the test-level
- Log files, if persisted (as specified in the test), will be persisted to a CI artifact
- Node config is specified at the test-level instead of the suite-level
- Node/Hardhat process starting/stopping is now async, and runs much faster
- Per-node config includes:
- simulating proof failures
- logging to file
- log level
- log topics
- storage quota
- debug (print logs to stdout)
- Tests find next available ports when starting nodes, as closing ports on Windows can lag
- Hardhat is no longer required to be running prior to starting the integration tests (as long as Hardhat is configured to run in the tests).
- If Hardhat is already running, a snapshot will be taken and reverted before and after each test, respectively.
- If Hardhat is not already running and configured to run at the test-level, a Hardhat process will be spawned and torn down before and after each test, respectively.
* additional logging for debug purposes
* address PR feedback
- fix spelling
- revert change from catching ProviderError to SignerError -- this should be handled more consistently in the Market abstraction, and will be handled in another PR.
- remove method label from raiseAssert
- remove unused import
* Use API instead of command exec to test for free port
Use chronos `createStreamServer` API to test for free port by binding localhost address and port. Use `ServerFlags.ReuseAddr` to enable reuse of same IP/Port on multiple test runs.
* clean up
* remove upraises annotations from tests
* Update tests to work with updated erasure coding slot sizes
* update dataset size, nodes, tolerance to match valid ec params
Integration tests now have valid dataset sizes (blocks), tolerances, and number of nodes, to work with valid ec params. These values are validated when requested storage.
Print the rest api failure message (via doAssert) when a rest api call fails (eg the rest api may validate some ec params).
All integration tests pass when the async `clock.now` changes are reverted.
* dont use async clock for now
* fix workflow
* move integration logs uplod to reusable
---------
Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
2024-02-19 04:55:39 +00:00
|
|
|
let purchaseId = await client0.requestStorage(
|
|
|
|
cid,
|
|
|
|
duration=totalPeriods.periods,
|
|
|
|
origDatasetSizeInBlocks = datasetSizeInBlocks)
|
|
|
|
check eventually client0.purchaseStateIs(purchaseId, "started")
|
2023-04-19 13:06:00 +00:00
|
|
|
|
2023-03-27 13:47:25 +00:00
|
|
|
var proofWasSubmitted = false
|
|
|
|
proc onProofSubmitted(event: ProofSubmitted) =
|
|
|
|
proofWasSubmitted = true
|
2023-04-19 13:06:00 +00:00
|
|
|
|
refactor: multinode integration test refactor (#662)
* refactor multi node test suite
Refactor the multinode test suite into the marketplace test suite.
- Arbitrary number of nodes can be started with each test: clients, providers, validators
- Hardhat can also be started locally with each test, usually for the purpose of saving and inspecting its log file.
- Log files for all nodes can be persisted on disk, with configuration at the test-level
- Log files, if persisted (as specified in the test), will be persisted to a CI artifact
- Node config is specified at the test-level instead of the suite-level
- Node/Hardhat process starting/stopping is now async, and runs much faster
- Per-node config includes:
- simulating proof failures
- logging to file
- log level
- log topics
- storage quota
- debug (print logs to stdout)
- Tests find next available ports when starting nodes, as closing ports on Windows can lag
- Hardhat is no longer required to be running prior to starting the integration tests (as long as Hardhat is configured to run in the tests).
- If Hardhat is already running, a snapshot will be taken and reverted before and after each test, respectively.
- If Hardhat is not already running and configured to run at the test-level, a Hardhat process will be spawned and torn down before and after each test, respectively.
* additional logging for debug purposes
* address PR feedback
- fix spelling
- revert change from catching ProviderError to SignerError -- this should be handled more consistently in the Market abstraction, and will be handled in another PR.
- remove method label from raiseAssert
- remove unused import
* Use API instead of command exec to test for free port
Use chronos `createStreamServer` API to test for free port by binding localhost address and port. Use `ServerFlags.ReuseAddr` to enable reuse of same IP/Port on multiple test runs.
* clean up
* remove upraises annotations from tests
* Update tests to work with updated erasure coding slot sizes
* update dataset size, nodes, tolerance to match valid ec params
Integration tests now have valid dataset sizes (blocks), tolerances, and number of nodes, to work with valid ec params. These values are validated when requested storage.
Print the rest api failure message (via doAssert) when a rest api call fails (eg the rest api may validate some ec params).
All integration tests pass when the async `clock.now` changes are reverted.
* dont use async clock for now
* fix workflow
* move integration logs uplod to reusable
---------
Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
2024-02-19 04:55:39 +00:00
|
|
|
let subscription = await marketplace.subscribe(ProofSubmitted, onProofSubmitted)
|
2023-04-19 13:06:00 +00:00
|
|
|
|
refactor: multinode integration test refactor (#662)
* refactor multi node test suite
Refactor the multinode test suite into the marketplace test suite.
- Arbitrary number of nodes can be started with each test: clients, providers, validators
- Hardhat can also be started locally with each test, usually for the purpose of saving and inspecting its log file.
- Log files for all nodes can be persisted on disk, with configuration at the test-level
- Log files, if persisted (as specified in the test), will be persisted to a CI artifact
- Node config is specified at the test-level instead of the suite-level
- Node/Hardhat process starting/stopping is now async, and runs much faster
- Per-node config includes:
- simulating proof failures
- logging to file
- log level
- log topics
- storage quota
- debug (print logs to stdout)
- Tests find next available ports when starting nodes, as closing ports on Windows can lag
- Hardhat is no longer required to be running prior to starting the integration tests (as long as Hardhat is configured to run in the tests).
- If Hardhat is already running, a snapshot will be taken and reverted before and after each test, respectively.
- If Hardhat is not already running and configured to run at the test-level, a Hardhat process will be spawned and torn down before and after each test, respectively.
* additional logging for debug purposes
* address PR feedback
- fix spelling
- revert change from catching ProviderError to SignerError -- this should be handled more consistently in the Market abstraction, and will be handled in another PR.
- remove method label from raiseAssert
- remove unused import
* Use API instead of command exec to test for free port
Use chronos `createStreamServer` API to test for free port by binding localhost address and port. Use `ServerFlags.ReuseAddr` to enable reuse of same IP/Port on multiple test runs.
* clean up
* remove upraises annotations from tests
* Update tests to work with updated erasure coding slot sizes
* update dataset size, nodes, tolerance to match valid ec params
Integration tests now have valid dataset sizes (blocks), tolerances, and number of nodes, to work with valid ec params. These values are validated when requested storage.
Print the rest api failure message (via doAssert) when a rest api call fails (eg the rest api may validate some ec params).
All integration tests pass when the async `clock.now` changes are reverted.
* dont use async clock for now
* fix workflow
* move integration logs uplod to reusable
---------
Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
2024-02-19 04:55:39 +00:00
|
|
|
let currentPeriod = await getCurrentPeriod()
|
|
|
|
check eventuallyP(proofWasSubmitted, currentPeriod + totalPeriods.u256 + 1)
|
2023-03-27 13:47:25 +00:00
|
|
|
|
refactor: multinode integration test refactor (#662)
* refactor multi node test suite
Refactor the multinode test suite into the marketplace test suite.
- Arbitrary number of nodes can be started with each test: clients, providers, validators
- Hardhat can also be started locally with each test, usually for the purpose of saving and inspecting its log file.
- Log files for all nodes can be persisted on disk, with configuration at the test-level
- Log files, if persisted (as specified in the test), will be persisted to a CI artifact
- Node config is specified at the test-level instead of the suite-level
- Node/Hardhat process starting/stopping is now async, and runs much faster
- Per-node config includes:
- simulating proof failures
- logging to file
- log level
- log topics
- storage quota
- debug (print logs to stdout)
- Tests find next available ports when starting nodes, as closing ports on Windows can lag
- Hardhat is no longer required to be running prior to starting the integration tests (as long as Hardhat is configured to run in the tests).
- If Hardhat is already running, a snapshot will be taken and reverted before and after each test, respectively.
- If Hardhat is not already running and configured to run at the test-level, a Hardhat process will be spawned and torn down before and after each test, respectively.
* additional logging for debug purposes
* address PR feedback
- fix spelling
- revert change from catching ProviderError to SignerError -- this should be handled more consistently in the Market abstraction, and will be handled in another PR.
- remove method label from raiseAssert
- remove unused import
* Use API instead of command exec to test for free port
Use chronos `createStreamServer` API to test for free port by binding localhost address and port. Use `ServerFlags.ReuseAddr` to enable reuse of same IP/Port on multiple test runs.
* clean up
* remove upraises annotations from tests
* Update tests to work with updated erasure coding slot sizes
* update dataset size, nodes, tolerance to match valid ec params
Integration tests now have valid dataset sizes (blocks), tolerances, and number of nodes, to work with valid ec params. These values are validated when requested storage.
Print the rest api failure message (via doAssert) when a rest api call fails (eg the rest api may validate some ec params).
All integration tests pass when the async `clock.now` changes are reverted.
* dont use async clock for now
* fix workflow
* move integration logs uplod to reusable
---------
Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
2024-02-19 04:55:39 +00:00
|
|
|
await subscription.unsubscribe()
|
2023-03-27 13:47:25 +00:00
|
|
|
|
2023-04-19 13:06:00 +00:00
|
|
|
|
refactor: multinode integration test refactor (#662)
* refactor multi node test suite
Refactor the multinode test suite into the marketplace test suite.
- Arbitrary number of nodes can be started with each test: clients, providers, validators
- Hardhat can also be started locally with each test, usually for the purpose of saving and inspecting its log file.
- Log files for all nodes can be persisted on disk, with configuration at the test-level
- Log files, if persisted (as specified in the test), will be persisted to a CI artifact
- Node config is specified at the test-level instead of the suite-level
- Node/Hardhat process starting/stopping is now async, and runs much faster
- Per-node config includes:
- simulating proof failures
- logging to file
- log level
- log topics
- storage quota
- debug (print logs to stdout)
- Tests find next available ports when starting nodes, as closing ports on Windows can lag
- Hardhat is no longer required to be running prior to starting the integration tests (as long as Hardhat is configured to run in the tests).
- If Hardhat is already running, a snapshot will be taken and reverted before and after each test, respectively.
- If Hardhat is not already running and configured to run at the test-level, a Hardhat process will be spawned and torn down before and after each test, respectively.
* additional logging for debug purposes
* address PR feedback
- fix spelling
- revert change from catching ProviderError to SignerError -- this should be handled more consistently in the Market abstraction, and will be handled in another PR.
- remove method label from raiseAssert
- remove unused import
* Use API instead of command exec to test for free port
Use chronos `createStreamServer` API to test for free port by binding localhost address and port. Use `ServerFlags.ReuseAddr` to enable reuse of same IP/Port on multiple test runs.
* clean up
* remove upraises annotations from tests
* Update tests to work with updated erasure coding slot sizes
* update dataset size, nodes, tolerance to match valid ec params
Integration tests now have valid dataset sizes (blocks), tolerances, and number of nodes, to work with valid ec params. These values are validated when requested storage.
Print the rest api failure message (via doAssert) when a rest api call fails (eg the rest api may validate some ec params).
All integration tests pass when the async `clock.now` changes are reverted.
* dont use async clock for now
* fix workflow
* move integration logs uplod to reusable
---------
Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
2024-02-19 04:55:39 +00:00
|
|
|
marketplacesuite "Simulate invalid proofs":
|
2023-06-22 10:32:18 +00:00
|
|
|
|
|
|
|
# TODO: these are very loose tests in that they are not testing EXACTLY how
|
|
|
|
# proofs were marked as missed by the validator. These tests should be
|
|
|
|
# tightened so that they are showing, as an integration test, that specific
|
|
|
|
# proofs are being marked as missed by the validator.
|
|
|
|
|
refactor: multinode integration test refactor (#662)
* refactor multi node test suite
Refactor the multinode test suite into the marketplace test suite.
- Arbitrary number of nodes can be started with each test: clients, providers, validators
- Hardhat can also be started locally with each test, usually for the purpose of saving and inspecting its log file.
- Log files for all nodes can be persisted on disk, with configuration at the test-level
- Log files, if persisted (as specified in the test), will be persisted to a CI artifact
- Node config is specified at the test-level instead of the suite-level
- Node/Hardhat process starting/stopping is now async, and runs much faster
- Per-node config includes:
- simulating proof failures
- logging to file
- log level
- log topics
- storage quota
- debug (print logs to stdout)
- Tests find next available ports when starting nodes, as closing ports on Windows can lag
- Hardhat is no longer required to be running prior to starting the integration tests (as long as Hardhat is configured to run in the tests).
- If Hardhat is already running, a snapshot will be taken and reverted before and after each test, respectively.
- If Hardhat is not already running and configured to run at the test-level, a Hardhat process will be spawned and torn down before and after each test, respectively.
* additional logging for debug purposes
* address PR feedback
- fix spelling
- revert change from catching ProviderError to SignerError -- this should be handled more consistently in the Market abstraction, and will be handled in another PR.
- remove method label from raiseAssert
- remove unused import
* Use API instead of command exec to test for free port
Use chronos `createStreamServer` API to test for free port by binding localhost address and port. Use `ServerFlags.ReuseAddr` to enable reuse of same IP/Port on multiple test runs.
* clean up
* remove upraises annotations from tests
* Update tests to work with updated erasure coding slot sizes
* update dataset size, nodes, tolerance to match valid ec params
Integration tests now have valid dataset sizes (blocks), tolerances, and number of nodes, to work with valid ec params. These values are validated when requested storage.
Print the rest api failure message (via doAssert) when a rest api call fails (eg the rest api may validate some ec params).
All integration tests pass when the async `clock.now` changes are reverted.
* dont use async clock for now
* fix workflow
* move integration logs uplod to reusable
---------
Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
2024-02-19 04:55:39 +00:00
|
|
|
test "slot is freed after too many invalid proofs submitted", NodeConfigs(
|
|
|
|
# Uncomment to start Hardhat automatically, typically so logs can be inspected locally
|
|
|
|
# hardhat: HardhatConfig().withLogFile(),
|
|
|
|
|
|
|
|
clients:
|
|
|
|
CodexConfig()
|
|
|
|
.nodes(1)
|
|
|
|
# .debug() # uncomment to enable console log output
|
|
|
|
.withLogFile() # uncomment to output log file to tests/integration/logs/<start_datetime> <suite_name>/<test_name>/<node_role>_<node_idx>.log
|
|
|
|
.withLogTopics("node"),
|
|
|
|
|
|
|
|
providers:
|
|
|
|
CodexConfig()
|
|
|
|
.nodes(1)
|
|
|
|
.simulateProofFailuresFor(providerIdx=0, failEveryNProofs=1)
|
|
|
|
# .debug() # uncomment to enable console log output
|
|
|
|
.withLogFile() # uncomment to output log file to tests/integration/logs/<start_datetime> <suite_name>/<test_name>/<node_role>_<node_idx>.log
|
|
|
|
.withLogTopics("marketplace", "sales", "reservations", "node"),
|
|
|
|
|
|
|
|
validators:
|
|
|
|
CodexConfig()
|
|
|
|
.nodes(1)
|
|
|
|
.withLogFile() # uncomment to output log file to tests/integration/logs/<start_datetime> <suite_name>/<test_name>/<node_role>_<node_idx>.log
|
|
|
|
# .debug() # uncomment to enable console log output
|
|
|
|
.withLogTopics("validator", "onchain", "ethers")
|
|
|
|
):
|
|
|
|
let client0 = clients()[0].client
|
|
|
|
let totalPeriods = 50
|
|
|
|
|
|
|
|
let datasetSizeInBlocks = 2
|
|
|
|
let data = await RandomChunker.example(blocks=datasetSizeInBlocks)
|
|
|
|
createAvailabilities(data.len, totalPeriods.periods)
|
|
|
|
|
|
|
|
let cid = client0.upload(data).get
|
|
|
|
|
|
|
|
let purchaseId = await client0.requestStorage(
|
|
|
|
cid,
|
2024-03-11 16:57:20 +00:00
|
|
|
expiry=10.periods,
|
refactor: multinode integration test refactor (#662)
* refactor multi node test suite
Refactor the multinode test suite into the marketplace test suite.
- Arbitrary number of nodes can be started with each test: clients, providers, validators
- Hardhat can also be started locally with each test, usually for the purpose of saving and inspecting its log file.
- Log files for all nodes can be persisted on disk, with configuration at the test-level
- Log files, if persisted (as specified in the test), will be persisted to a CI artifact
- Node config is specified at the test-level instead of the suite-level
- Node/Hardhat process starting/stopping is now async, and runs much faster
- Per-node config includes:
- simulating proof failures
- logging to file
- log level
- log topics
- storage quota
- debug (print logs to stdout)
- Tests find next available ports when starting nodes, as closing ports on Windows can lag
- Hardhat is no longer required to be running prior to starting the integration tests (as long as Hardhat is configured to run in the tests).
- If Hardhat is already running, a snapshot will be taken and reverted before and after each test, respectively.
- If Hardhat is not already running and configured to run at the test-level, a Hardhat process will be spawned and torn down before and after each test, respectively.
* additional logging for debug purposes
* address PR feedback
- fix spelling
- revert change from catching ProviderError to SignerError -- this should be handled more consistently in the Market abstraction, and will be handled in another PR.
- remove method label from raiseAssert
- remove unused import
* Use API instead of command exec to test for free port
Use chronos `createStreamServer` API to test for free port by binding localhost address and port. Use `ServerFlags.ReuseAddr` to enable reuse of same IP/Port on multiple test runs.
* clean up
* remove upraises annotations from tests
* Update tests to work with updated erasure coding slot sizes
* update dataset size, nodes, tolerance to match valid ec params
Integration tests now have valid dataset sizes (blocks), tolerances, and number of nodes, to work with valid ec params. These values are validated when requested storage.
Print the rest api failure message (via doAssert) when a rest api call fails (eg the rest api may validate some ec params).
All integration tests pass when the async `clock.now` changes are reverted.
* dont use async clock for now
* fix workflow
* move integration logs uplod to reusable
---------
Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
2024-02-19 04:55:39 +00:00
|
|
|
duration=totalPeriods.periods,
|
|
|
|
origDatasetSizeInBlocks=datasetSizeInBlocks)
|
|
|
|
let requestId = client0.requestId(purchaseId).get
|
2023-06-22 10:32:18 +00:00
|
|
|
|
refactor: multinode integration test refactor (#662)
* refactor multi node test suite
Refactor the multinode test suite into the marketplace test suite.
- Arbitrary number of nodes can be started with each test: clients, providers, validators
- Hardhat can also be started locally with each test, usually for the purpose of saving and inspecting its log file.
- Log files for all nodes can be persisted on disk, with configuration at the test-level
- Log files, if persisted (as specified in the test), will be persisted to a CI artifact
- Node config is specified at the test-level instead of the suite-level
- Node/Hardhat process starting/stopping is now async, and runs much faster
- Per-node config includes:
- simulating proof failures
- logging to file
- log level
- log topics
- storage quota
- debug (print logs to stdout)
- Tests find next available ports when starting nodes, as closing ports on Windows can lag
- Hardhat is no longer required to be running prior to starting the integration tests (as long as Hardhat is configured to run in the tests).
- If Hardhat is already running, a snapshot will be taken and reverted before and after each test, respectively.
- If Hardhat is not already running and configured to run at the test-level, a Hardhat process will be spawned and torn down before and after each test, respectively.
* additional logging for debug purposes
* address PR feedback
- fix spelling
- revert change from catching ProviderError to SignerError -- this should be handled more consistently in the Market abstraction, and will be handled in another PR.
- remove method label from raiseAssert
- remove unused import
* Use API instead of command exec to test for free port
Use chronos `createStreamServer` API to test for free port by binding localhost address and port. Use `ServerFlags.ReuseAddr` to enable reuse of same IP/Port on multiple test runs.
* clean up
* remove upraises annotations from tests
* Update tests to work with updated erasure coding slot sizes
* update dataset size, nodes, tolerance to match valid ec params
Integration tests now have valid dataset sizes (blocks), tolerances, and number of nodes, to work with valid ec params. These values are validated when requested storage.
Print the rest api failure message (via doAssert) when a rest api call fails (eg the rest api may validate some ec params).
All integration tests pass when the async `clock.now` changes are reverted.
* dont use async clock for now
* fix workflow
* move integration logs uplod to reusable
---------
Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
2024-02-19 04:55:39 +00:00
|
|
|
check eventually client0.purchaseStateIs(purchaseId, "started")
|
2023-06-22 10:32:18 +00:00
|
|
|
|
|
|
|
var slotWasFreed = false
|
|
|
|
proc onSlotFreed(event: SlotFreed) =
|
refactor: multinode integration test refactor (#662)
* refactor multi node test suite
Refactor the multinode test suite into the marketplace test suite.
- Arbitrary number of nodes can be started with each test: clients, providers, validators
- Hardhat can also be started locally with each test, usually for the purpose of saving and inspecting its log file.
- Log files for all nodes can be persisted on disk, with configuration at the test-level
- Log files, if persisted (as specified in the test), will be persisted to a CI artifact
- Node config is specified at the test-level instead of the suite-level
- Node/Hardhat process starting/stopping is now async, and runs much faster
- Per-node config includes:
- simulating proof failures
- logging to file
- log level
- log topics
- storage quota
- debug (print logs to stdout)
- Tests find next available ports when starting nodes, as closing ports on Windows can lag
- Hardhat is no longer required to be running prior to starting the integration tests (as long as Hardhat is configured to run in the tests).
- If Hardhat is already running, a snapshot will be taken and reverted before and after each test, respectively.
- If Hardhat is not already running and configured to run at the test-level, a Hardhat process will be spawned and torn down before and after each test, respectively.
* additional logging for debug purposes
* address PR feedback
- fix spelling
- revert change from catching ProviderError to SignerError -- this should be handled more consistently in the Market abstraction, and will be handled in another PR.
- remove method label from raiseAssert
- remove unused import
* Use API instead of command exec to test for free port
Use chronos `createStreamServer` API to test for free port by binding localhost address and port. Use `ServerFlags.ReuseAddr` to enable reuse of same IP/Port on multiple test runs.
* clean up
* remove upraises annotations from tests
* Update tests to work with updated erasure coding slot sizes
* update dataset size, nodes, tolerance to match valid ec params
Integration tests now have valid dataset sizes (blocks), tolerances, and number of nodes, to work with valid ec params. These values are validated when requested storage.
Print the rest api failure message (via doAssert) when a rest api call fails (eg the rest api may validate some ec params).
All integration tests pass when the async `clock.now` changes are reverted.
* dont use async clock for now
* fix workflow
* move integration logs uplod to reusable
---------
Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
2024-02-19 04:55:39 +00:00
|
|
|
if event.requestId == requestId and
|
|
|
|
event.slotIndex == 0.u256: # assume only one slot, so index 0
|
2023-06-22 10:32:18 +00:00
|
|
|
slotWasFreed = true
|
|
|
|
|
refactor: multinode integration test refactor (#662)
* refactor multi node test suite
Refactor the multinode test suite into the marketplace test suite.
- Arbitrary number of nodes can be started with each test: clients, providers, validators
- Hardhat can also be started locally with each test, usually for the purpose of saving and inspecting its log file.
- Log files for all nodes can be persisted on disk, with configuration at the test-level
- Log files, if persisted (as specified in the test), will be persisted to a CI artifact
- Node config is specified at the test-level instead of the suite-level
- Node/Hardhat process starting/stopping is now async, and runs much faster
- Per-node config includes:
- simulating proof failures
- logging to file
- log level
- log topics
- storage quota
- debug (print logs to stdout)
- Tests find next available ports when starting nodes, as closing ports on Windows can lag
- Hardhat is no longer required to be running prior to starting the integration tests (as long as Hardhat is configured to run in the tests).
- If Hardhat is already running, a snapshot will be taken and reverted before and after each test, respectively.
- If Hardhat is not already running and configured to run at the test-level, a Hardhat process will be spawned and torn down before and after each test, respectively.
* additional logging for debug purposes
* address PR feedback
- fix spelling
- revert change from catching ProviderError to SignerError -- this should be handled more consistently in the Market abstraction, and will be handled in another PR.
- remove method label from raiseAssert
- remove unused import
* Use API instead of command exec to test for free port
Use chronos `createStreamServer` API to test for free port by binding localhost address and port. Use `ServerFlags.ReuseAddr` to enable reuse of same IP/Port on multiple test runs.
* clean up
* remove upraises annotations from tests
* Update tests to work with updated erasure coding slot sizes
* update dataset size, nodes, tolerance to match valid ec params
Integration tests now have valid dataset sizes (blocks), tolerances, and number of nodes, to work with valid ec params. These values are validated when requested storage.
Print the rest api failure message (via doAssert) when a rest api call fails (eg the rest api may validate some ec params).
All integration tests pass when the async `clock.now` changes are reverted.
* dont use async clock for now
* fix workflow
* move integration logs uplod to reusable
---------
Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
2024-02-19 04:55:39 +00:00
|
|
|
let subscription = await marketplace.subscribe(SlotFreed, onSlotFreed)
|
2023-06-22 10:32:18 +00:00
|
|
|
|
refactor: multinode integration test refactor (#662)
* refactor multi node test suite
Refactor the multinode test suite into the marketplace test suite.
- Arbitrary number of nodes can be started with each test: clients, providers, validators
- Hardhat can also be started locally with each test, usually for the purpose of saving and inspecting its log file.
- Log files for all nodes can be persisted on disk, with configuration at the test-level
- Log files, if persisted (as specified in the test), will be persisted to a CI artifact
- Node config is specified at the test-level instead of the suite-level
- Node/Hardhat process starting/stopping is now async, and runs much faster
- Per-node config includes:
- simulating proof failures
- logging to file
- log level
- log topics
- storage quota
- debug (print logs to stdout)
- Tests find next available ports when starting nodes, as closing ports on Windows can lag
- Hardhat is no longer required to be running prior to starting the integration tests (as long as Hardhat is configured to run in the tests).
- If Hardhat is already running, a snapshot will be taken and reverted before and after each test, respectively.
- If Hardhat is not already running and configured to run at the test-level, a Hardhat process will be spawned and torn down before and after each test, respectively.
* additional logging for debug purposes
* address PR feedback
- fix spelling
- revert change from catching ProviderError to SignerError -- this should be handled more consistently in the Market abstraction, and will be handled in another PR.
- remove method label from raiseAssert
- remove unused import
* Use API instead of command exec to test for free port
Use chronos `createStreamServer` API to test for free port by binding localhost address and port. Use `ServerFlags.ReuseAddr` to enable reuse of same IP/Port on multiple test runs.
* clean up
* remove upraises annotations from tests
* Update tests to work with updated erasure coding slot sizes
* update dataset size, nodes, tolerance to match valid ec params
Integration tests now have valid dataset sizes (blocks), tolerances, and number of nodes, to work with valid ec params. These values are validated when requested storage.
Print the rest api failure message (via doAssert) when a rest api call fails (eg the rest api may validate some ec params).
All integration tests pass when the async `clock.now` changes are reverted.
* dont use async clock for now
* fix workflow
* move integration logs uplod to reusable
---------
Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
2024-02-19 04:55:39 +00:00
|
|
|
let currentPeriod = await getCurrentPeriod()
|
|
|
|
check eventuallyP(slotWasFreed, currentPeriod + totalPeriods.u256 + 1)
|
2023-06-22 10:32:18 +00:00
|
|
|
|
|
|
|
await subscription.unsubscribe()
|
|
|
|
|
refactor: multinode integration test refactor (#662)
* refactor multi node test suite
Refactor the multinode test suite into the marketplace test suite.
- Arbitrary number of nodes can be started with each test: clients, providers, validators
- Hardhat can also be started locally with each test, usually for the purpose of saving and inspecting its log file.
- Log files for all nodes can be persisted on disk, with configuration at the test-level
- Log files, if persisted (as specified in the test), will be persisted to a CI artifact
- Node config is specified at the test-level instead of the suite-level
- Node/Hardhat process starting/stopping is now async, and runs much faster
- Per-node config includes:
- simulating proof failures
- logging to file
- log level
- log topics
- storage quota
- debug (print logs to stdout)
- Tests find next available ports when starting nodes, as closing ports on Windows can lag
- Hardhat is no longer required to be running prior to starting the integration tests (as long as Hardhat is configured to run in the tests).
- If Hardhat is already running, a snapshot will be taken and reverted before and after each test, respectively.
- If Hardhat is not already running and configured to run at the test-level, a Hardhat process will be spawned and torn down before and after each test, respectively.
* additional logging for debug purposes
* address PR feedback
- fix spelling
- revert change from catching ProviderError to SignerError -- this should be handled more consistently in the Market abstraction, and will be handled in another PR.
- remove method label from raiseAssert
- remove unused import
* Use API instead of command exec to test for free port
Use chronos `createStreamServer` API to test for free port by binding localhost address and port. Use `ServerFlags.ReuseAddr` to enable reuse of same IP/Port on multiple test runs.
* clean up
* remove upraises annotations from tests
* Update tests to work with updated erasure coding slot sizes
* update dataset size, nodes, tolerance to match valid ec params
Integration tests now have valid dataset sizes (blocks), tolerances, and number of nodes, to work with valid ec params. These values are validated when requested storage.
Print the rest api failure message (via doAssert) when a rest api call fails (eg the rest api may validate some ec params).
All integration tests pass when the async `clock.now` changes are reverted.
* dont use async clock for now
* fix workflow
* move integration logs uplod to reusable
---------
Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
2024-02-19 04:55:39 +00:00
|
|
|
test "slot is not freed when not enough invalid proofs submitted", NodeConfigs(
|
|
|
|
# Uncomment to start Hardhat automatically, typically so logs can be inspected locally
|
|
|
|
# hardhat: HardhatConfig().withLogFile(),
|
|
|
|
|
|
|
|
clients:
|
|
|
|
CodexConfig()
|
|
|
|
.nodes(1)
|
|
|
|
# .debug() # uncomment to enable console log output
|
|
|
|
.withLogFile() # uncomment to output log file to tests/integration/logs/<start_datetime> <suite_name>/<test_name>/<node_role>_<node_idx>.log
|
|
|
|
.withLogTopics("node"),
|
|
|
|
|
|
|
|
providers:
|
|
|
|
CodexConfig()
|
|
|
|
.nodes(1)
|
|
|
|
.simulateProofFailuresFor(providerIdx=0, failEveryNProofs=3)
|
|
|
|
# .debug() # uncomment to enable console log output
|
|
|
|
.withLogFile() # uncomment to output log file to tests/integration/logs/<start_datetime> <suite_name>/<test_name>/<node_role>_<node_idx>.log
|
|
|
|
.withLogTopics("marketplace", "sales", "reservations", "node"),
|
|
|
|
|
|
|
|
validators:
|
|
|
|
CodexConfig()
|
|
|
|
.nodes(1)
|
|
|
|
# .debug()
|
|
|
|
.withLogFile() # uncomment to output log file to tests/integration/logs/<start_datetime> <suite_name>/<test_name>/<node_role>_<node_idx>.log
|
|
|
|
.withLogTopics("validator", "onchain", "ethers")
|
|
|
|
):
|
|
|
|
let client0 = clients()[0].client
|
|
|
|
let totalPeriods = 25
|
|
|
|
|
|
|
|
let datasetSizeInBlocks = 2
|
|
|
|
let data = await RandomChunker.example(blocks=datasetSizeInBlocks)
|
|
|
|
createAvailabilities(data.len, totalPeriods.periods)
|
|
|
|
|
|
|
|
let cid = client0.upload(data).get
|
|
|
|
|
|
|
|
let purchaseId = await client0.requestStorage(
|
|
|
|
cid,
|
2024-03-11 16:57:20 +00:00
|
|
|
expiry=10.periods,
|
refactor: multinode integration test refactor (#662)
* refactor multi node test suite
Refactor the multinode test suite into the marketplace test suite.
- Arbitrary number of nodes can be started with each test: clients, providers, validators
- Hardhat can also be started locally with each test, usually for the purpose of saving and inspecting its log file.
- Log files for all nodes can be persisted on disk, with configuration at the test-level
- Log files, if persisted (as specified in the test), will be persisted to a CI artifact
- Node config is specified at the test-level instead of the suite-level
- Node/Hardhat process starting/stopping is now async, and runs much faster
- Per-node config includes:
- simulating proof failures
- logging to file
- log level
- log topics
- storage quota
- debug (print logs to stdout)
- Tests find next available ports when starting nodes, as closing ports on Windows can lag
- Hardhat is no longer required to be running prior to starting the integration tests (as long as Hardhat is configured to run in the tests).
- If Hardhat is already running, a snapshot will be taken and reverted before and after each test, respectively.
- If Hardhat is not already running and configured to run at the test-level, a Hardhat process will be spawned and torn down before and after each test, respectively.
* additional logging for debug purposes
* address PR feedback
- fix spelling
- revert change from catching ProviderError to SignerError -- this should be handled more consistently in the Market abstraction, and will be handled in another PR.
- remove method label from raiseAssert
- remove unused import
* Use API instead of command exec to test for free port
Use chronos `createStreamServer` API to test for free port by binding localhost address and port. Use `ServerFlags.ReuseAddr` to enable reuse of same IP/Port on multiple test runs.
* clean up
* remove upraises annotations from tests
* Update tests to work with updated erasure coding slot sizes
* update dataset size, nodes, tolerance to match valid ec params
Integration tests now have valid dataset sizes (blocks), tolerances, and number of nodes, to work with valid ec params. These values are validated when requested storage.
Print the rest api failure message (via doAssert) when a rest api call fails (eg the rest api may validate some ec params).
All integration tests pass when the async `clock.now` changes are reverted.
* dont use async clock for now
* fix workflow
* move integration logs uplod to reusable
---------
Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
2024-02-19 04:55:39 +00:00
|
|
|
duration=totalPeriods.periods,
|
|
|
|
origDatasetSizeInBlocks=datasetSizeInBlocks)
|
|
|
|
let requestId = client0.requestId(purchaseId).get
|
2023-06-22 10:32:18 +00:00
|
|
|
|
refactor: multinode integration test refactor (#662)
* refactor multi node test suite
Refactor the multinode test suite into the marketplace test suite.
- Arbitrary number of nodes can be started with each test: clients, providers, validators
- Hardhat can also be started locally with each test, usually for the purpose of saving and inspecting its log file.
- Log files for all nodes can be persisted on disk, with configuration at the test-level
- Log files, if persisted (as specified in the test), will be persisted to a CI artifact
- Node config is specified at the test-level instead of the suite-level
- Node/Hardhat process starting/stopping is now async, and runs much faster
- Per-node config includes:
- simulating proof failures
- logging to file
- log level
- log topics
- storage quota
- debug (print logs to stdout)
- Tests find next available ports when starting nodes, as closing ports on Windows can lag
- Hardhat is no longer required to be running prior to starting the integration tests (as long as Hardhat is configured to run in the tests).
- If Hardhat is already running, a snapshot will be taken and reverted before and after each test, respectively.
- If Hardhat is not already running and configured to run at the test-level, a Hardhat process will be spawned and torn down before and after each test, respectively.
* additional logging for debug purposes
* address PR feedback
- fix spelling
- revert change from catching ProviderError to SignerError -- this should be handled more consistently in the Market abstraction, and will be handled in another PR.
- remove method label from raiseAssert
- remove unused import
* Use API instead of command exec to test for free port
Use chronos `createStreamServer` API to test for free port by binding localhost address and port. Use `ServerFlags.ReuseAddr` to enable reuse of same IP/Port on multiple test runs.
* clean up
* remove upraises annotations from tests
* Update tests to work with updated erasure coding slot sizes
* update dataset size, nodes, tolerance to match valid ec params
Integration tests now have valid dataset sizes (blocks), tolerances, and number of nodes, to work with valid ec params. These values are validated when requested storage.
Print the rest api failure message (via doAssert) when a rest api call fails (eg the rest api may validate some ec params).
All integration tests pass when the async `clock.now` changes are reverted.
* dont use async clock for now
* fix workflow
* move integration logs uplod to reusable
---------
Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
2024-02-19 04:55:39 +00:00
|
|
|
check eventually client0.purchaseStateIs(purchaseId, "started")
|
2023-06-22 10:32:18 +00:00
|
|
|
|
|
|
|
var slotWasFreed = false
|
|
|
|
proc onSlotFreed(event: SlotFreed) =
|
refactor: multinode integration test refactor (#662)
* refactor multi node test suite
Refactor the multinode test suite into the marketplace test suite.
- Arbitrary number of nodes can be started with each test: clients, providers, validators
- Hardhat can also be started locally with each test, usually for the purpose of saving and inspecting its log file.
- Log files for all nodes can be persisted on disk, with configuration at the test-level
- Log files, if persisted (as specified in the test), will be persisted to a CI artifact
- Node config is specified at the test-level instead of the suite-level
- Node/Hardhat process starting/stopping is now async, and runs much faster
- Per-node config includes:
- simulating proof failures
- logging to file
- log level
- log topics
- storage quota
- debug (print logs to stdout)
- Tests find next available ports when starting nodes, as closing ports on Windows can lag
- Hardhat is no longer required to be running prior to starting the integration tests (as long as Hardhat is configured to run in the tests).
- If Hardhat is already running, a snapshot will be taken and reverted before and after each test, respectively.
- If Hardhat is not already running and configured to run at the test-level, a Hardhat process will be spawned and torn down before and after each test, respectively.
* additional logging for debug purposes
* address PR feedback
- fix spelling
- revert change from catching ProviderError to SignerError -- this should be handled more consistently in the Market abstraction, and will be handled in another PR.
- remove method label from raiseAssert
- remove unused import
* Use API instead of command exec to test for free port
Use chronos `createStreamServer` API to test for free port by binding localhost address and port. Use `ServerFlags.ReuseAddr` to enable reuse of same IP/Port on multiple test runs.
* clean up
* remove upraises annotations from tests
* Update tests to work with updated erasure coding slot sizes
* update dataset size, nodes, tolerance to match valid ec params
Integration tests now have valid dataset sizes (blocks), tolerances, and number of nodes, to work with valid ec params. These values are validated when requested storage.
Print the rest api failure message (via doAssert) when a rest api call fails (eg the rest api may validate some ec params).
All integration tests pass when the async `clock.now` changes are reverted.
* dont use async clock for now
* fix workflow
* move integration logs uplod to reusable
---------
Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
2024-02-19 04:55:39 +00:00
|
|
|
if event.requestId == requestId and
|
|
|
|
event.slotIndex == 0.u256:
|
2023-06-22 10:32:18 +00:00
|
|
|
slotWasFreed = true
|
refactor: multinode integration test refactor (#662)
* refactor multi node test suite
Refactor the multinode test suite into the marketplace test suite.
- Arbitrary number of nodes can be started with each test: clients, providers, validators
- Hardhat can also be started locally with each test, usually for the purpose of saving and inspecting its log file.
- Log files for all nodes can be persisted on disk, with configuration at the test-level
- Log files, if persisted (as specified in the test), will be persisted to a CI artifact
- Node config is specified at the test-level instead of the suite-level
- Node/Hardhat process starting/stopping is now async, and runs much faster
- Per-node config includes:
- simulating proof failures
- logging to file
- log level
- log topics
- storage quota
- debug (print logs to stdout)
- Tests find next available ports when starting nodes, as closing ports on Windows can lag
- Hardhat is no longer required to be running prior to starting the integration tests (as long as Hardhat is configured to run in the tests).
- If Hardhat is already running, a snapshot will be taken and reverted before and after each test, respectively.
- If Hardhat is not already running and configured to run at the test-level, a Hardhat process will be spawned and torn down before and after each test, respectively.
* additional logging for debug purposes
* address PR feedback
- fix spelling
- revert change from catching ProviderError to SignerError -- this should be handled more consistently in the Market abstraction, and will be handled in another PR.
- remove method label from raiseAssert
- remove unused import
* Use API instead of command exec to test for free port
Use chronos `createStreamServer` API to test for free port by binding localhost address and port. Use `ServerFlags.ReuseAddr` to enable reuse of same IP/Port on multiple test runs.
* clean up
* remove upraises annotations from tests
* Update tests to work with updated erasure coding slot sizes
* update dataset size, nodes, tolerance to match valid ec params
Integration tests now have valid dataset sizes (blocks), tolerances, and number of nodes, to work with valid ec params. These values are validated when requested storage.
Print the rest api failure message (via doAssert) when a rest api call fails (eg the rest api may validate some ec params).
All integration tests pass when the async `clock.now` changes are reverted.
* dont use async clock for now
* fix workflow
* move integration logs uplod to reusable
---------
Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
2024-02-19 04:55:39 +00:00
|
|
|
|
2023-06-22 10:32:18 +00:00
|
|
|
let subscription = await marketplace.subscribe(SlotFreed, onSlotFreed)
|
|
|
|
|
refactor: multinode integration test refactor (#662)
* refactor multi node test suite
Refactor the multinode test suite into the marketplace test suite.
- Arbitrary number of nodes can be started with each test: clients, providers, validators
- Hardhat can also be started locally with each test, usually for the purpose of saving and inspecting its log file.
- Log files for all nodes can be persisted on disk, with configuration at the test-level
- Log files, if persisted (as specified in the test), will be persisted to a CI artifact
- Node config is specified at the test-level instead of the suite-level
- Node/Hardhat process starting/stopping is now async, and runs much faster
- Per-node config includes:
- simulating proof failures
- logging to file
- log level
- log topics
- storage quota
- debug (print logs to stdout)
- Tests find next available ports when starting nodes, as closing ports on Windows can lag
- Hardhat is no longer required to be running prior to starting the integration tests (as long as Hardhat is configured to run in the tests).
- If Hardhat is already running, a snapshot will be taken and reverted before and after each test, respectively.
- If Hardhat is not already running and configured to run at the test-level, a Hardhat process will be spawned and torn down before and after each test, respectively.
* additional logging for debug purposes
* address PR feedback
- fix spelling
- revert change from catching ProviderError to SignerError -- this should be handled more consistently in the Market abstraction, and will be handled in another PR.
- remove method label from raiseAssert
- remove unused import
* Use API instead of command exec to test for free port
Use chronos `createStreamServer` API to test for free port by binding localhost address and port. Use `ServerFlags.ReuseAddr` to enable reuse of same IP/Port on multiple test runs.
* clean up
* remove upraises annotations from tests
* Update tests to work with updated erasure coding slot sizes
* update dataset size, nodes, tolerance to match valid ec params
Integration tests now have valid dataset sizes (blocks), tolerances, and number of nodes, to work with valid ec params. These values are validated when requested storage.
Print the rest api failure message (via doAssert) when a rest api call fails (eg the rest api may validate some ec params).
All integration tests pass when the async `clock.now` changes are reverted.
* dont use async clock for now
* fix workflow
* move integration logs uplod to reusable
---------
Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
2024-02-19 04:55:39 +00:00
|
|
|
# check not freed
|
|
|
|
let currentPeriod = await getCurrentPeriod()
|
|
|
|
check not eventuallyP(slotWasFreed, currentPeriod + totalPeriods.u256 + 1)
|
2023-06-22 10:32:18 +00:00
|
|
|
|
refactor: multinode integration test refactor (#662)
* refactor multi node test suite
Refactor the multinode test suite into the marketplace test suite.
- Arbitrary number of nodes can be started with each test: clients, providers, validators
- Hardhat can also be started locally with each test, usually for the purpose of saving and inspecting its log file.
- Log files for all nodes can be persisted on disk, with configuration at the test-level
- Log files, if persisted (as specified in the test), will be persisted to a CI artifact
- Node config is specified at the test-level instead of the suite-level
- Node/Hardhat process starting/stopping is now async, and runs much faster
- Per-node config includes:
- simulating proof failures
- logging to file
- log level
- log topics
- storage quota
- debug (print logs to stdout)
- Tests find next available ports when starting nodes, as closing ports on Windows can lag
- Hardhat is no longer required to be running prior to starting the integration tests (as long as Hardhat is configured to run in the tests).
- If Hardhat is already running, a snapshot will be taken and reverted before and after each test, respectively.
- If Hardhat is not already running and configured to run at the test-level, a Hardhat process will be spawned and torn down before and after each test, respectively.
* additional logging for debug purposes
* address PR feedback
- fix spelling
- revert change from catching ProviderError to SignerError -- this should be handled more consistently in the Market abstraction, and will be handled in another PR.
- remove method label from raiseAssert
- remove unused import
* Use API instead of command exec to test for free port
Use chronos `createStreamServer` API to test for free port by binding localhost address and port. Use `ServerFlags.ReuseAddr` to enable reuse of same IP/Port on multiple test runs.
* clean up
* remove upraises annotations from tests
* Update tests to work with updated erasure coding slot sizes
* update dataset size, nodes, tolerance to match valid ec params
Integration tests now have valid dataset sizes (blocks), tolerances, and number of nodes, to work with valid ec params. These values are validated when requested storage.
Print the rest api failure message (via doAssert) when a rest api call fails (eg the rest api may validate some ec params).
All integration tests pass when the async `clock.now` changes are reverted.
* dont use async clock for now
* fix workflow
* move integration logs uplod to reusable
---------
Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
2024-02-19 04:55:39 +00:00
|
|
|
await subscription.unsubscribe()
|
|
|
|
|
2024-02-19 18:12:10 +00:00
|
|
|
# TODO: uncomment once fixed
|
|
|
|
# test "host that submits invalid proofs is paid out less", NodeConfigs(
|
|
|
|
# # Uncomment to start Hardhat automatically, typically so logs can be inspected locally
|
|
|
|
# # hardhat: HardhatConfig().withLogFile(),
|
|
|
|
|
|
|
|
# clients:
|
|
|
|
# CodexConfig()
|
|
|
|
# .nodes(1)
|
|
|
|
# # .debug() # uncomment to enable console log output.debug()
|
|
|
|
# .withLogFile() # uncomment to output log file to tests/integration/logs/<start_datetime> <suite_name>/<test_name>/<node_role>_<node_idx>.log
|
|
|
|
# .withLogTopics("node", "erasure", "clock", "purchases"),
|
|
|
|
|
|
|
|
# providers:
|
|
|
|
# CodexConfig()
|
|
|
|
# .nodes(3)
|
|
|
|
# .simulateProofFailuresFor(providerIdx=0, failEveryNProofs=2)
|
|
|
|
# # .debug() # uncomment to enable console log output
|
|
|
|
# .withLogFile() # uncomment to output log file to tests/integration/logs/<start_datetime> <suite_name>/<test_name>/<node_role>_<node_idx>.log
|
|
|
|
# .withLogTopics("marketplace", "sales", "reservations", "node"),
|
|
|
|
|
|
|
|
# validators:
|
|
|
|
# CodexConfig()
|
|
|
|
# .nodes(1)
|
|
|
|
# # .debug()
|
|
|
|
# .withLogFile() # uncomment to output log file to tests/integration/logs/<start_datetime> <suite_name>/<test_name>/<node_role>_<node_idx>.log
|
|
|
|
# .withLogTopics("validator")
|
|
|
|
# ):
|
|
|
|
# let client0 = clients()[0].client
|
|
|
|
# let provider0 = providers()[0]
|
|
|
|
# let provider1 = providers()[1]
|
|
|
|
# let provider2 = providers()[2]
|
|
|
|
# let totalPeriods = 25
|
|
|
|
|
|
|
|
# let datasetSizeInBlocks = 3
|
|
|
|
# let data = await RandomChunker.example(blocks=datasetSizeInBlocks)
|
|
|
|
# # original data = 3 blocks so slot size will be 4 blocks
|
|
|
|
# let slotSize = (DefaultBlockSize * 4.NBytes).Natural.u256
|
|
|
|
|
|
|
|
# discard provider0.client.postAvailability(
|
|
|
|
# size=slotSize, # should match 1 slot only
|
|
|
|
# duration=totalPeriods.periods.u256,
|
|
|
|
# minPrice=300.u256,
|
|
|
|
# maxCollateral=200.u256
|
|
|
|
# )
|
|
|
|
|
|
|
|
# let cid = client0.upload(data).get
|
|
|
|
|
|
|
|
# let purchaseId = await client0.requestStorage(
|
|
|
|
# cid,
|
|
|
|
# duration=totalPeriods.periods,
|
|
|
|
# expiry=10.periods,
|
|
|
|
# nodes=3,
|
|
|
|
# tolerance=1,
|
|
|
|
# origDatasetSizeInBlocks=datasetSizeInBlocks
|
|
|
|
# )
|
|
|
|
|
|
|
|
# without requestId =? client0.requestId(purchaseId):
|
|
|
|
# fail()
|
|
|
|
|
|
|
|
# var filledSlotIds: seq[SlotId] = @[]
|
|
|
|
# proc onSlotFilled(event: SlotFilled) =
|
|
|
|
# let slotId = slotId(event.requestId, event.slotIndex)
|
|
|
|
# filledSlotIds.add slotId
|
|
|
|
|
|
|
|
# let subscription = await marketplace.subscribe(SlotFilled, onSlotFilled)
|
|
|
|
|
|
|
|
# # wait til first slot is filled
|
|
|
|
# check eventually filledSlotIds.len > 0
|
|
|
|
|
|
|
|
# # now add availability for providers 1 and 2, which should allow them to to
|
|
|
|
# # put the remaining slots in their queues
|
|
|
|
# discard provider1.client.postAvailability(
|
|
|
|
# size=slotSize, # should match 1 slot only
|
|
|
|
# duration=totalPeriods.periods.u256,
|
|
|
|
# minPrice=300.u256,
|
|
|
|
# maxCollateral=200.u256
|
|
|
|
# )
|
|
|
|
|
|
|
|
# check eventually filledSlotIds.len > 1
|
|
|
|
|
|
|
|
# discard provider2.client.postAvailability(
|
|
|
|
# size=slotSize, # should match 1 slot only
|
|
|
|
# duration=totalPeriods.periods.u256,
|
|
|
|
# minPrice=300.u256,
|
|
|
|
# maxCollateral=200.u256
|
|
|
|
# )
|
|
|
|
|
|
|
|
# check eventually filledSlotIds.len > 2
|
|
|
|
|
|
|
|
# # Wait til second slot is filled. SaleFilled happens too quickly, check SaleProving instead.
|
|
|
|
# check eventually provider1.client.saleStateIs(filledSlotIds[1], "SaleProving")
|
|
|
|
# check eventually provider2.client.saleStateIs(filledSlotIds[2], "SaleProving")
|
|
|
|
|
|
|
|
# check eventually client0.purchaseStateIs(purchaseId, "started")
|
|
|
|
|
|
|
|
# let currentPeriod = await getCurrentPeriod()
|
|
|
|
# check eventuallyP(
|
|
|
|
# # SaleFinished happens too quickly, check SalePayout instead
|
|
|
|
# provider0.client.saleStateIs(filledSlotIds[0], "SalePayout"),
|
|
|
|
# currentPeriod + totalPeriods.u256 + 1)
|
|
|
|
|
|
|
|
# check eventuallyP(
|
|
|
|
# # SaleFinished happens too quickly, check SalePayout instead
|
|
|
|
# provider1.client.saleStateIs(filledSlotIds[1], "SalePayout"),
|
|
|
|
# currentPeriod + totalPeriods.u256 + 1)
|
|
|
|
|
|
|
|
# check eventuallyP(
|
|
|
|
# # SaleFinished happens too quickly, check SalePayout instead
|
|
|
|
# provider2.client.saleStateIs(filledSlotIds[2], "SalePayout"),
|
|
|
|
# currentPeriod + totalPeriods.u256 + 1)
|
|
|
|
|
|
|
|
# check eventually(
|
|
|
|
# (await token.balanceOf(provider1.ethAccount)) >
|
|
|
|
# (await token.balanceOf(provider0.ethAccount))
|
|
|
|
# )
|
|
|
|
|
|
|
|
# await subscription.unsubscribe()
|