nim-dagger/tests/codex/sales/testreservations.nim

327 lines
11 KiB
Nim
Raw Normal View History

[marketplace] Availability improvements (#535) ## Problem When Availabilities are created, the amount of bytes in the Availability are reserved in the repo, so those bytes on disk cannot be written to otherwise. When a request for storage is received by a node, if a previously created Availability is matched, an attempt will be made to fill a slot in the request (more accurately, the request's slots are added to the SlotQueue, and eventually those slots will be processed). During download, bytes that were reserved for the Availability were released (as they were written to disk). To prevent more bytes from being released than were reserved in the Availability, the Availability was marked as used during the download, so that no other requests would match the Availability, and therefore no new downloads (and byte releases) would begin. The unfortunate downside to this, is that the number of Availabilities a node has determines the download concurrency capacity. If, for example, a node creates a single Availability that covers all available disk space the operator is willing to use, that single Availability would mean that only one download could occur at a time, meaning the node could potentially miss out on storage opportunities. ## Solution To alleviate the concurrency issue, each time a slot is processed, a Reservation is created, which takes size (aka reserved bytes) away from the Availability and stores them in the Reservation object. This can be done as many times as needed as long as there are enough bytes remaining in the Availability. Therefore, concurrent downloads are no longer limited by the number of Availabilities. Instead, they would more likely be limited to the SlotQueue's `maxWorkers`. From a database design perspective, an Availability has zero or more Reservations. Reservations are persisted in the RepoStore's metadata, along with Availabilities. The metadata store key path for Reservations is ` meta / sales / reservations / <availabilityId> / <reservationId>`, while Availabilities are stored one level up, eg `meta / sales / reservations / <availabilityId> `, allowing all Reservations for an Availability to be queried (this is not currently needed, but may be useful when work to restore Availability size is implemented, more on this later). ### Lifecycle When a reservation is created, its size is deducted from the Availability, and when a reservation is deleted, any remaining size (bytes not written to disk) is returned to the Availability. If the request finishes, is cancelled (expired), or an error occurs, the Reservation is deleted (and any undownloaded bytes returned to the Availability). In addition, when the Sales module starts, any Reservations that are not actively being used in a filled slot, are deleted. Having a Reservation persisted until after a storage request is completed, will allow for the originally set Availability size to be reclaimed once a request contract has been completed. This is a feature that is yet to be implemented, however the work in this PR is a step in the direction towards enabling this. ### Unknowns Reservation size is determined by the `StorageAsk.slotSize`. If during download, more bytes than `slotSize` are attempted to be downloaded than this, then the Reservation update will fail, and the state machine will move to a `SaleErrored` state, deleting the Reservation. This will likely prevent the slot from being filled. ### Notes Based on #514
2023-09-29 04:33:08 +00:00
import std/random
[marketplace] Add Reservations Module (#340) * [marketplace] reservations module - add de/serialization for Availability - add markUsed/markUnused in persisted availability - add query for unused - add reserve/release - reservation module tests - split ContractInteractions into client contracts and host contracts - remove reservations start/stop as the repo start/stop is being managed by the node - remove dedicated reservations metadata store and use the metadata store from the repo instead - Split ContractInteractions into: - ClientInteractions (with purchasing) - HostInteractions (with sales and proving) - compilation fix for nim 1.2 [repostore] fix started flag, add tests [marketplace] persist slot index For loading the sales state from chain, the slot index was not previously persisted in the contract. Will retrieve the slot index from the contract when the sales state is loaded. * Revert repostore changes In favour of separate PR https://github.com/status-im/nim-codex/pull/374. * remove warnings * clean up * tests: stop repostore during teardown * change constructor type identifier Change Contracts constructor to accept Contracts type instead of ContractInteractions. * change constructor return type to Result instead of Option * fix and split interactions tests * clean up, fix tests * find availability by slot id * remove duplication in host/client interactions * add test for finding availability by slotId * log instead of raiseAssert when failed to mark availability as unused * move to SaleErrored state instead of raiseAssert * remove unneeded reverse It appears that order is not preserved in the repostore, so reversing does not have the intended effect here. * update open api spec for potential rest endpoint errors * move functions about available bytes to repostore * WIP: reserve and release availabilities as needed WIP: not tested yet Availabilities are marked as used when matched (just before downloading starts) so that future matching logic does not match an availability currently in use. As the download progresses, batches of blocks are written to disk, and the equivalent bytes are released from the reservation module. The size of the availability is reduced as well. During a reserve or release operation, availability updates occur after the repo is manipulated. If the availability update operation fails, the reserve or release is rolled back to maintain correct accounting of bytes. Finally, once download completes, or if an error occurs, the availability is marked as unused so future matching can occur. * delete availability when all bytes released * fix tests + cleanup * remove availability from SalesContext callbacks Availability is no longer used past the SaleDownloading state in the state machine. Cleanup of Availability (marking unused) is handled directly in the SaleDownloading state, and no longer in SaleErrored or SaleFinished. Likewise, Availabilities shouldn’t need to be handled on node restart. Additionally, Availability was being passed in SalesContext callbacks, and now that Availability is only used temporarily in the SaleDownloading state, Availability is contextually irrelevant to the callbacks, except in OnStore possibly, though it was not being consumed. * test clean up * - remove availability from callbacks and constructors from previous commit that needed to be removed (oopsie) - fix integration test that checks availabilities - there was a bug fixed that crashed the node due to a missing `return success` in onStore - the test was fixed by ensuring that availabilities are remaining on the node, and the size has been reduced - change Availability back to non-ref object and constructor back to init - add trace logging of all state transitions in state machine - add generally useful trace logging * fixes after rebase 1. Fix onProve callbacks 2. Use Slot type instead of tuple for retrieving active slot. 3. Bump codex-contracts-eth that exposes getActivceSlot call. * swap contracts branch to not support slot collateral Slot collateral changes in the contracts require further changes in the client code, so we’ll skip those changes for now and add in a separate commit. * modify Interactions and Deployment constructors - `HostInteractions` and `ClientInteractions` constructors were simplified to take a contract address and no overloads - `Interactions` prepared simplified so there are no overloads - `Deployment` constructor updated so that it takes an optional string parameter, instead `Option[string]` * Move `batchProc` declaration `batchProc` needs to be consumed by both `node` and `salescontext`, and they can’t reference each other as it creates a circular dependency. * [reservations] rename `available` to `hasAvailable` * [reservations] default error message to inner error msg * add SaleIngored state When a storage request is handled but the request does match availabilities, the sales agent machine is sent to the SaleIgnored state. In addition, the agent is constructed in a way that if the request is ignored, the sales agent is removed from the list of active agents being tracked in the sales module.
2023-04-04 07:05:16 +00:00
import pkg/questionable
import pkg/questionable/results
import pkg/chronos
import pkg/datastore
import pkg/codex/stores
import pkg/codex/sales
[marketplace] Availability improvements (#535) ## Problem When Availabilities are created, the amount of bytes in the Availability are reserved in the repo, so those bytes on disk cannot be written to otherwise. When a request for storage is received by a node, if a previously created Availability is matched, an attempt will be made to fill a slot in the request (more accurately, the request's slots are added to the SlotQueue, and eventually those slots will be processed). During download, bytes that were reserved for the Availability were released (as they were written to disk). To prevent more bytes from being released than were reserved in the Availability, the Availability was marked as used during the download, so that no other requests would match the Availability, and therefore no new downloads (and byte releases) would begin. The unfortunate downside to this, is that the number of Availabilities a node has determines the download concurrency capacity. If, for example, a node creates a single Availability that covers all available disk space the operator is willing to use, that single Availability would mean that only one download could occur at a time, meaning the node could potentially miss out on storage opportunities. ## Solution To alleviate the concurrency issue, each time a slot is processed, a Reservation is created, which takes size (aka reserved bytes) away from the Availability and stores them in the Reservation object. This can be done as many times as needed as long as there are enough bytes remaining in the Availability. Therefore, concurrent downloads are no longer limited by the number of Availabilities. Instead, they would more likely be limited to the SlotQueue's `maxWorkers`. From a database design perspective, an Availability has zero or more Reservations. Reservations are persisted in the RepoStore's metadata, along with Availabilities. The metadata store key path for Reservations is ` meta / sales / reservations / <availabilityId> / <reservationId>`, while Availabilities are stored one level up, eg `meta / sales / reservations / <availabilityId> `, allowing all Reservations for an Availability to be queried (this is not currently needed, but may be useful when work to restore Availability size is implemented, more on this later). ### Lifecycle When a reservation is created, its size is deducted from the Availability, and when a reservation is deleted, any remaining size (bytes not written to disk) is returned to the Availability. If the request finishes, is cancelled (expired), or an error occurs, the Reservation is deleted (and any undownloaded bytes returned to the Availability). In addition, when the Sales module starts, any Reservations that are not actively being used in a filled slot, are deleted. Having a Reservation persisted until after a storage request is completed, will allow for the originally set Availability size to be reclaimed once a request contract has been completed. This is a feature that is yet to be implemented, however the work in this PR is a step in the direction towards enabling this. ### Unknowns Reservation size is determined by the `StorageAsk.slotSize`. If during download, more bytes than `slotSize` are attempted to be downloaded than this, then the Reservation update will fail, and the state machine will move to a `SaleErrored` state, deleting the Reservation. This will likely prevent the slot from being filled. ### Notes Based on #514
2023-09-29 04:33:08 +00:00
import pkg/codex/utils/json
[marketplace] Add Reservations Module (#340) * [marketplace] reservations module - add de/serialization for Availability - add markUsed/markUnused in persisted availability - add query for unused - add reserve/release - reservation module tests - split ContractInteractions into client contracts and host contracts - remove reservations start/stop as the repo start/stop is being managed by the node - remove dedicated reservations metadata store and use the metadata store from the repo instead - Split ContractInteractions into: - ClientInteractions (with purchasing) - HostInteractions (with sales and proving) - compilation fix for nim 1.2 [repostore] fix started flag, add tests [marketplace] persist slot index For loading the sales state from chain, the slot index was not previously persisted in the contract. Will retrieve the slot index from the contract when the sales state is loaded. * Revert repostore changes In favour of separate PR https://github.com/status-im/nim-codex/pull/374. * remove warnings * clean up * tests: stop repostore during teardown * change constructor type identifier Change Contracts constructor to accept Contracts type instead of ContractInteractions. * change constructor return type to Result instead of Option * fix and split interactions tests * clean up, fix tests * find availability by slot id * remove duplication in host/client interactions * add test for finding availability by slotId * log instead of raiseAssert when failed to mark availability as unused * move to SaleErrored state instead of raiseAssert * remove unneeded reverse It appears that order is not preserved in the repostore, so reversing does not have the intended effect here. * update open api spec for potential rest endpoint errors * move functions about available bytes to repostore * WIP: reserve and release availabilities as needed WIP: not tested yet Availabilities are marked as used when matched (just before downloading starts) so that future matching logic does not match an availability currently in use. As the download progresses, batches of blocks are written to disk, and the equivalent bytes are released from the reservation module. The size of the availability is reduced as well. During a reserve or release operation, availability updates occur after the repo is manipulated. If the availability update operation fails, the reserve or release is rolled back to maintain correct accounting of bytes. Finally, once download completes, or if an error occurs, the availability is marked as unused so future matching can occur. * delete availability when all bytes released * fix tests + cleanup * remove availability from SalesContext callbacks Availability is no longer used past the SaleDownloading state in the state machine. Cleanup of Availability (marking unused) is handled directly in the SaleDownloading state, and no longer in SaleErrored or SaleFinished. Likewise, Availabilities shouldn’t need to be handled on node restart. Additionally, Availability was being passed in SalesContext callbacks, and now that Availability is only used temporarily in the SaleDownloading state, Availability is contextually irrelevant to the callbacks, except in OnStore possibly, though it was not being consumed. * test clean up * - remove availability from callbacks and constructors from previous commit that needed to be removed (oopsie) - fix integration test that checks availabilities - there was a bug fixed that crashed the node due to a missing `return success` in onStore - the test was fixed by ensuring that availabilities are remaining on the node, and the size has been reduced - change Availability back to non-ref object and constructor back to init - add trace logging of all state transitions in state machine - add generally useful trace logging * fixes after rebase 1. Fix onProve callbacks 2. Use Slot type instead of tuple for retrieving active slot. 3. Bump codex-contracts-eth that exposes getActivceSlot call. * swap contracts branch to not support slot collateral Slot collateral changes in the contracts require further changes in the client code, so we’ll skip those changes for now and add in a separate commit. * modify Interactions and Deployment constructors - `HostInteractions` and `ClientInteractions` constructors were simplified to take a contract address and no overloads - `Interactions` prepared simplified so there are no overloads - `Deployment` constructor updated so that it takes an optional string parameter, instead `Option[string]` * Move `batchProc` declaration `batchProc` needs to be consumed by both `node` and `salescontext`, and they can’t reference each other as it creates a circular dependency. * [reservations] rename `available` to `hasAvailable` * [reservations] default error message to inner error msg * add SaleIngored state When a storage request is handled but the request does match availabilities, the sales agent machine is sent to the SaleIgnored state. In addition, the agent is constructed in a way that if the request is ignored, the sales agent is removed from the list of active agents being tracked in the sales module.
2023-04-04 07:05:16 +00:00
import ../../asynctest
[marketplace] Add Reservations Module (#340) * [marketplace] reservations module - add de/serialization for Availability - add markUsed/markUnused in persisted availability - add query for unused - add reserve/release - reservation module tests - split ContractInteractions into client contracts and host contracts - remove reservations start/stop as the repo start/stop is being managed by the node - remove dedicated reservations metadata store and use the metadata store from the repo instead - Split ContractInteractions into: - ClientInteractions (with purchasing) - HostInteractions (with sales and proving) - compilation fix for nim 1.2 [repostore] fix started flag, add tests [marketplace] persist slot index For loading the sales state from chain, the slot index was not previously persisted in the contract. Will retrieve the slot index from the contract when the sales state is loaded. * Revert repostore changes In favour of separate PR https://github.com/status-im/nim-codex/pull/374. * remove warnings * clean up * tests: stop repostore during teardown * change constructor type identifier Change Contracts constructor to accept Contracts type instead of ContractInteractions. * change constructor return type to Result instead of Option * fix and split interactions tests * clean up, fix tests * find availability by slot id * remove duplication in host/client interactions * add test for finding availability by slotId * log instead of raiseAssert when failed to mark availability as unused * move to SaleErrored state instead of raiseAssert * remove unneeded reverse It appears that order is not preserved in the repostore, so reversing does not have the intended effect here. * update open api spec for potential rest endpoint errors * move functions about available bytes to repostore * WIP: reserve and release availabilities as needed WIP: not tested yet Availabilities are marked as used when matched (just before downloading starts) so that future matching logic does not match an availability currently in use. As the download progresses, batches of blocks are written to disk, and the equivalent bytes are released from the reservation module. The size of the availability is reduced as well. During a reserve or release operation, availability updates occur after the repo is manipulated. If the availability update operation fails, the reserve or release is rolled back to maintain correct accounting of bytes. Finally, once download completes, or if an error occurs, the availability is marked as unused so future matching can occur. * delete availability when all bytes released * fix tests + cleanup * remove availability from SalesContext callbacks Availability is no longer used past the SaleDownloading state in the state machine. Cleanup of Availability (marking unused) is handled directly in the SaleDownloading state, and no longer in SaleErrored or SaleFinished. Likewise, Availabilities shouldn’t need to be handled on node restart. Additionally, Availability was being passed in SalesContext callbacks, and now that Availability is only used temporarily in the SaleDownloading state, Availability is contextually irrelevant to the callbacks, except in OnStore possibly, though it was not being consumed. * test clean up * - remove availability from callbacks and constructors from previous commit that needed to be removed (oopsie) - fix integration test that checks availabilities - there was a bug fixed that crashed the node due to a missing `return success` in onStore - the test was fixed by ensuring that availabilities are remaining on the node, and the size has been reduced - change Availability back to non-ref object and constructor back to init - add trace logging of all state transitions in state machine - add generally useful trace logging * fixes after rebase 1. Fix onProve callbacks 2. Use Slot type instead of tuple for retrieving active slot. 3. Bump codex-contracts-eth that exposes getActivceSlot call. * swap contracts branch to not support slot collateral Slot collateral changes in the contracts require further changes in the client code, so we’ll skip those changes for now and add in a separate commit. * modify Interactions and Deployment constructors - `HostInteractions` and `ClientInteractions` constructors were simplified to take a contract address and no overloads - `Interactions` prepared simplified so there are no overloads - `Deployment` constructor updated so that it takes an optional string parameter, instead `Option[string]` * Move `batchProc` declaration `batchProc` needs to be consumed by both `node` and `salescontext`, and they can’t reference each other as it creates a circular dependency. * [reservations] rename `available` to `hasAvailable` * [reservations] default error message to inner error msg * add SaleIngored state When a storage request is handled but the request does match availabilities, the sales agent machine is sent to the SaleIgnored state. In addition, the agent is constructed in a way that if the request is ignored, the sales agent is removed from the list of active agents being tracked in the sales module.
2023-04-04 07:05:16 +00:00
import ../examples
[marketplace] Availability improvements (#535) ## Problem When Availabilities are created, the amount of bytes in the Availability are reserved in the repo, so those bytes on disk cannot be written to otherwise. When a request for storage is received by a node, if a previously created Availability is matched, an attempt will be made to fill a slot in the request (more accurately, the request's slots are added to the SlotQueue, and eventually those slots will be processed). During download, bytes that were reserved for the Availability were released (as they were written to disk). To prevent more bytes from being released than were reserved in the Availability, the Availability was marked as used during the download, so that no other requests would match the Availability, and therefore no new downloads (and byte releases) would begin. The unfortunate downside to this, is that the number of Availabilities a node has determines the download concurrency capacity. If, for example, a node creates a single Availability that covers all available disk space the operator is willing to use, that single Availability would mean that only one download could occur at a time, meaning the node could potentially miss out on storage opportunities. ## Solution To alleviate the concurrency issue, each time a slot is processed, a Reservation is created, which takes size (aka reserved bytes) away from the Availability and stores them in the Reservation object. This can be done as many times as needed as long as there are enough bytes remaining in the Availability. Therefore, concurrent downloads are no longer limited by the number of Availabilities. Instead, they would more likely be limited to the SlotQueue's `maxWorkers`. From a database design perspective, an Availability has zero or more Reservations. Reservations are persisted in the RepoStore's metadata, along with Availabilities. The metadata store key path for Reservations is ` meta / sales / reservations / <availabilityId> / <reservationId>`, while Availabilities are stored one level up, eg `meta / sales / reservations / <availabilityId> `, allowing all Reservations for an Availability to be queried (this is not currently needed, but may be useful when work to restore Availability size is implemented, more on this later). ### Lifecycle When a reservation is created, its size is deducted from the Availability, and when a reservation is deleted, any remaining size (bytes not written to disk) is returned to the Availability. If the request finishes, is cancelled (expired), or an error occurs, the Reservation is deleted (and any undownloaded bytes returned to the Availability). In addition, when the Sales module starts, any Reservations that are not actively being used in a filled slot, are deleted. Having a Reservation persisted until after a storage request is completed, will allow for the originally set Availability size to be reclaimed once a request contract has been completed. This is a feature that is yet to be implemented, however the work in this PR is a step in the direction towards enabling this. ### Unknowns Reservation size is determined by the `StorageAsk.slotSize`. If during download, more bytes than `slotSize` are attempted to be downloaded than this, then the Reservation update will fail, and the state machine will move to a `SaleErrored` state, deleting the Reservation. This will likely prevent the slot from being filled. ### Notes Based on #514
2023-09-29 04:33:08 +00:00
import ../helpers
[marketplace] Add Reservations Module (#340) * [marketplace] reservations module - add de/serialization for Availability - add markUsed/markUnused in persisted availability - add query for unused - add reserve/release - reservation module tests - split ContractInteractions into client contracts and host contracts - remove reservations start/stop as the repo start/stop is being managed by the node - remove dedicated reservations metadata store and use the metadata store from the repo instead - Split ContractInteractions into: - ClientInteractions (with purchasing) - HostInteractions (with sales and proving) - compilation fix for nim 1.2 [repostore] fix started flag, add tests [marketplace] persist slot index For loading the sales state from chain, the slot index was not previously persisted in the contract. Will retrieve the slot index from the contract when the sales state is loaded. * Revert repostore changes In favour of separate PR https://github.com/status-im/nim-codex/pull/374. * remove warnings * clean up * tests: stop repostore during teardown * change constructor type identifier Change Contracts constructor to accept Contracts type instead of ContractInteractions. * change constructor return type to Result instead of Option * fix and split interactions tests * clean up, fix tests * find availability by slot id * remove duplication in host/client interactions * add test for finding availability by slotId * log instead of raiseAssert when failed to mark availability as unused * move to SaleErrored state instead of raiseAssert * remove unneeded reverse It appears that order is not preserved in the repostore, so reversing does not have the intended effect here. * update open api spec for potential rest endpoint errors * move functions about available bytes to repostore * WIP: reserve and release availabilities as needed WIP: not tested yet Availabilities are marked as used when matched (just before downloading starts) so that future matching logic does not match an availability currently in use. As the download progresses, batches of blocks are written to disk, and the equivalent bytes are released from the reservation module. The size of the availability is reduced as well. During a reserve or release operation, availability updates occur after the repo is manipulated. If the availability update operation fails, the reserve or release is rolled back to maintain correct accounting of bytes. Finally, once download completes, or if an error occurs, the availability is marked as unused so future matching can occur. * delete availability when all bytes released * fix tests + cleanup * remove availability from SalesContext callbacks Availability is no longer used past the SaleDownloading state in the state machine. Cleanup of Availability (marking unused) is handled directly in the SaleDownloading state, and no longer in SaleErrored or SaleFinished. Likewise, Availabilities shouldn’t need to be handled on node restart. Additionally, Availability was being passed in SalesContext callbacks, and now that Availability is only used temporarily in the SaleDownloading state, Availability is contextually irrelevant to the callbacks, except in OnStore possibly, though it was not being consumed. * test clean up * - remove availability from callbacks and constructors from previous commit that needed to be removed (oopsie) - fix integration test that checks availabilities - there was a bug fixed that crashed the node due to a missing `return success` in onStore - the test was fixed by ensuring that availabilities are remaining on the node, and the size has been reduced - change Availability back to non-ref object and constructor back to init - add trace logging of all state transitions in state machine - add generally useful trace logging * fixes after rebase 1. Fix onProve callbacks 2. Use Slot type instead of tuple for retrieving active slot. 3. Bump codex-contracts-eth that exposes getActivceSlot call. * swap contracts branch to not support slot collateral Slot collateral changes in the contracts require further changes in the client code, so we’ll skip those changes for now and add in a separate commit. * modify Interactions and Deployment constructors - `HostInteractions` and `ClientInteractions` constructors were simplified to take a contract address and no overloads - `Interactions` prepared simplified so there are no overloads - `Deployment` constructor updated so that it takes an optional string parameter, instead `Option[string]` * Move `batchProc` declaration `batchProc` needs to be consumed by both `node` and `salescontext`, and they can’t reference each other as it creates a circular dependency. * [reservations] rename `available` to `hasAvailable` * [reservations] default error message to inner error msg * add SaleIngored state When a storage request is handled but the request does match availabilities, the sales agent machine is sent to the SaleIgnored state. In addition, the agent is constructed in a way that if the request is ignored, the sales agent is removed from the list of active agents being tracked in the sales module.
2023-04-04 07:05:16 +00:00
asyncchecksuite "Reservations module":
[marketplace] Add Reservations Module (#340) * [marketplace] reservations module - add de/serialization for Availability - add markUsed/markUnused in persisted availability - add query for unused - add reserve/release - reservation module tests - split ContractInteractions into client contracts and host contracts - remove reservations start/stop as the repo start/stop is being managed by the node - remove dedicated reservations metadata store and use the metadata store from the repo instead - Split ContractInteractions into: - ClientInteractions (with purchasing) - HostInteractions (with sales and proving) - compilation fix for nim 1.2 [repostore] fix started flag, add tests [marketplace] persist slot index For loading the sales state from chain, the slot index was not previously persisted in the contract. Will retrieve the slot index from the contract when the sales state is loaded. * Revert repostore changes In favour of separate PR https://github.com/status-im/nim-codex/pull/374. * remove warnings * clean up * tests: stop repostore during teardown * change constructor type identifier Change Contracts constructor to accept Contracts type instead of ContractInteractions. * change constructor return type to Result instead of Option * fix and split interactions tests * clean up, fix tests * find availability by slot id * remove duplication in host/client interactions * add test for finding availability by slotId * log instead of raiseAssert when failed to mark availability as unused * move to SaleErrored state instead of raiseAssert * remove unneeded reverse It appears that order is not preserved in the repostore, so reversing does not have the intended effect here. * update open api spec for potential rest endpoint errors * move functions about available bytes to repostore * WIP: reserve and release availabilities as needed WIP: not tested yet Availabilities are marked as used when matched (just before downloading starts) so that future matching logic does not match an availability currently in use. As the download progresses, batches of blocks are written to disk, and the equivalent bytes are released from the reservation module. The size of the availability is reduced as well. During a reserve or release operation, availability updates occur after the repo is manipulated. If the availability update operation fails, the reserve or release is rolled back to maintain correct accounting of bytes. Finally, once download completes, or if an error occurs, the availability is marked as unused so future matching can occur. * delete availability when all bytes released * fix tests + cleanup * remove availability from SalesContext callbacks Availability is no longer used past the SaleDownloading state in the state machine. Cleanup of Availability (marking unused) is handled directly in the SaleDownloading state, and no longer in SaleErrored or SaleFinished. Likewise, Availabilities shouldn’t need to be handled on node restart. Additionally, Availability was being passed in SalesContext callbacks, and now that Availability is only used temporarily in the SaleDownloading state, Availability is contextually irrelevant to the callbacks, except in OnStore possibly, though it was not being consumed. * test clean up * - remove availability from callbacks and constructors from previous commit that needed to be removed (oopsie) - fix integration test that checks availabilities - there was a bug fixed that crashed the node due to a missing `return success` in onStore - the test was fixed by ensuring that availabilities are remaining on the node, and the size has been reduced - change Availability back to non-ref object and constructor back to init - add trace logging of all state transitions in state machine - add generally useful trace logging * fixes after rebase 1. Fix onProve callbacks 2. Use Slot type instead of tuple for retrieving active slot. 3. Bump codex-contracts-eth that exposes getActivceSlot call. * swap contracts branch to not support slot collateral Slot collateral changes in the contracts require further changes in the client code, so we’ll skip those changes for now and add in a separate commit. * modify Interactions and Deployment constructors - `HostInteractions` and `ClientInteractions` constructors were simplified to take a contract address and no overloads - `Interactions` prepared simplified so there are no overloads - `Deployment` constructor updated so that it takes an optional string parameter, instead `Option[string]` * Move `batchProc` declaration `batchProc` needs to be consumed by both `node` and `salescontext`, and they can’t reference each other as it creates a circular dependency. * [reservations] rename `available` to `hasAvailable` * [reservations] default error message to inner error msg * add SaleIngored state When a storage request is handled but the request does match availabilities, the sales agent machine is sent to the SaleIgnored state. In addition, the agent is constructed in a way that if the request is ignored, the sales agent is removed from the list of active agents being tracked in the sales module.
2023-04-04 07:05:16 +00:00
var
repo: RepoStore
repoDs: Datastore
metaDs: SQLiteDatastore
reservations: Reservations
setup:
[marketplace] Availability improvements (#535) ## Problem When Availabilities are created, the amount of bytes in the Availability are reserved in the repo, so those bytes on disk cannot be written to otherwise. When a request for storage is received by a node, if a previously created Availability is matched, an attempt will be made to fill a slot in the request (more accurately, the request's slots are added to the SlotQueue, and eventually those slots will be processed). During download, bytes that were reserved for the Availability were released (as they were written to disk). To prevent more bytes from being released than were reserved in the Availability, the Availability was marked as used during the download, so that no other requests would match the Availability, and therefore no new downloads (and byte releases) would begin. The unfortunate downside to this, is that the number of Availabilities a node has determines the download concurrency capacity. If, for example, a node creates a single Availability that covers all available disk space the operator is willing to use, that single Availability would mean that only one download could occur at a time, meaning the node could potentially miss out on storage opportunities. ## Solution To alleviate the concurrency issue, each time a slot is processed, a Reservation is created, which takes size (aka reserved bytes) away from the Availability and stores them in the Reservation object. This can be done as many times as needed as long as there are enough bytes remaining in the Availability. Therefore, concurrent downloads are no longer limited by the number of Availabilities. Instead, they would more likely be limited to the SlotQueue's `maxWorkers`. From a database design perspective, an Availability has zero or more Reservations. Reservations are persisted in the RepoStore's metadata, along with Availabilities. The metadata store key path for Reservations is ` meta / sales / reservations / <availabilityId> / <reservationId>`, while Availabilities are stored one level up, eg `meta / sales / reservations / <availabilityId> `, allowing all Reservations for an Availability to be queried (this is not currently needed, but may be useful when work to restore Availability size is implemented, more on this later). ### Lifecycle When a reservation is created, its size is deducted from the Availability, and when a reservation is deleted, any remaining size (bytes not written to disk) is returned to the Availability. If the request finishes, is cancelled (expired), or an error occurs, the Reservation is deleted (and any undownloaded bytes returned to the Availability). In addition, when the Sales module starts, any Reservations that are not actively being used in a filled slot, are deleted. Having a Reservation persisted until after a storage request is completed, will allow for the originally set Availability size to be reclaimed once a request contract has been completed. This is a feature that is yet to be implemented, however the work in this PR is a step in the direction towards enabling this. ### Unknowns Reservation size is determined by the `StorageAsk.slotSize`. If during download, more bytes than `slotSize` are attempted to be downloaded than this, then the Reservation update will fail, and the state machine will move to a `SaleErrored` state, deleting the Reservation. This will likely prevent the slot from being filled. ### Notes Based on #514
2023-09-29 04:33:08 +00:00
randomize(1.int64) # create reproducible results
[marketplace] Add Reservations Module (#340) * [marketplace] reservations module - add de/serialization for Availability - add markUsed/markUnused in persisted availability - add query for unused - add reserve/release - reservation module tests - split ContractInteractions into client contracts and host contracts - remove reservations start/stop as the repo start/stop is being managed by the node - remove dedicated reservations metadata store and use the metadata store from the repo instead - Split ContractInteractions into: - ClientInteractions (with purchasing) - HostInteractions (with sales and proving) - compilation fix for nim 1.2 [repostore] fix started flag, add tests [marketplace] persist slot index For loading the sales state from chain, the slot index was not previously persisted in the contract. Will retrieve the slot index from the contract when the sales state is loaded. * Revert repostore changes In favour of separate PR https://github.com/status-im/nim-codex/pull/374. * remove warnings * clean up * tests: stop repostore during teardown * change constructor type identifier Change Contracts constructor to accept Contracts type instead of ContractInteractions. * change constructor return type to Result instead of Option * fix and split interactions tests * clean up, fix tests * find availability by slot id * remove duplication in host/client interactions * add test for finding availability by slotId * log instead of raiseAssert when failed to mark availability as unused * move to SaleErrored state instead of raiseAssert * remove unneeded reverse It appears that order is not preserved in the repostore, so reversing does not have the intended effect here. * update open api spec for potential rest endpoint errors * move functions about available bytes to repostore * WIP: reserve and release availabilities as needed WIP: not tested yet Availabilities are marked as used when matched (just before downloading starts) so that future matching logic does not match an availability currently in use. As the download progresses, batches of blocks are written to disk, and the equivalent bytes are released from the reservation module. The size of the availability is reduced as well. During a reserve or release operation, availability updates occur after the repo is manipulated. If the availability update operation fails, the reserve or release is rolled back to maintain correct accounting of bytes. Finally, once download completes, or if an error occurs, the availability is marked as unused so future matching can occur. * delete availability when all bytes released * fix tests + cleanup * remove availability from SalesContext callbacks Availability is no longer used past the SaleDownloading state in the state machine. Cleanup of Availability (marking unused) is handled directly in the SaleDownloading state, and no longer in SaleErrored or SaleFinished. Likewise, Availabilities shouldn’t need to be handled on node restart. Additionally, Availability was being passed in SalesContext callbacks, and now that Availability is only used temporarily in the SaleDownloading state, Availability is contextually irrelevant to the callbacks, except in OnStore possibly, though it was not being consumed. * test clean up * - remove availability from callbacks and constructors from previous commit that needed to be removed (oopsie) - fix integration test that checks availabilities - there was a bug fixed that crashed the node due to a missing `return success` in onStore - the test was fixed by ensuring that availabilities are remaining on the node, and the size has been reduced - change Availability back to non-ref object and constructor back to init - add trace logging of all state transitions in state machine - add generally useful trace logging * fixes after rebase 1. Fix onProve callbacks 2. Use Slot type instead of tuple for retrieving active slot. 3. Bump codex-contracts-eth that exposes getActivceSlot call. * swap contracts branch to not support slot collateral Slot collateral changes in the contracts require further changes in the client code, so we’ll skip those changes for now and add in a separate commit. * modify Interactions and Deployment constructors - `HostInteractions` and `ClientInteractions` constructors were simplified to take a contract address and no overloads - `Interactions` prepared simplified so there are no overloads - `Deployment` constructor updated so that it takes an optional string parameter, instead `Option[string]` * Move `batchProc` declaration `batchProc` needs to be consumed by both `node` and `salescontext`, and they can’t reference each other as it creates a circular dependency. * [reservations] rename `available` to `hasAvailable` * [reservations] default error message to inner error msg * add SaleIngored state When a storage request is handled but the request does match availabilities, the sales agent machine is sent to the SaleIgnored state. In addition, the agent is constructed in a way that if the request is ignored, the sales agent is removed from the list of active agents being tracked in the sales module.
2023-04-04 07:05:16 +00:00
repoDs = SQLiteDatastore.new(Memory).tryGet()
metaDs = SQLiteDatastore.new(Memory).tryGet()
repo = RepoStore.new(repoDs, metaDs)
reservations = Reservations.new(repo)
[marketplace] Availability improvements (#535) ## Problem When Availabilities are created, the amount of bytes in the Availability are reserved in the repo, so those bytes on disk cannot be written to otherwise. When a request for storage is received by a node, if a previously created Availability is matched, an attempt will be made to fill a slot in the request (more accurately, the request's slots are added to the SlotQueue, and eventually those slots will be processed). During download, bytes that were reserved for the Availability were released (as they were written to disk). To prevent more bytes from being released than were reserved in the Availability, the Availability was marked as used during the download, so that no other requests would match the Availability, and therefore no new downloads (and byte releases) would begin. The unfortunate downside to this, is that the number of Availabilities a node has determines the download concurrency capacity. If, for example, a node creates a single Availability that covers all available disk space the operator is willing to use, that single Availability would mean that only one download could occur at a time, meaning the node could potentially miss out on storage opportunities. ## Solution To alleviate the concurrency issue, each time a slot is processed, a Reservation is created, which takes size (aka reserved bytes) away from the Availability and stores them in the Reservation object. This can be done as many times as needed as long as there are enough bytes remaining in the Availability. Therefore, concurrent downloads are no longer limited by the number of Availabilities. Instead, they would more likely be limited to the SlotQueue's `maxWorkers`. From a database design perspective, an Availability has zero or more Reservations. Reservations are persisted in the RepoStore's metadata, along with Availabilities. The metadata store key path for Reservations is ` meta / sales / reservations / <availabilityId> / <reservationId>`, while Availabilities are stored one level up, eg `meta / sales / reservations / <availabilityId> `, allowing all Reservations for an Availability to be queried (this is not currently needed, but may be useful when work to restore Availability size is implemented, more on this later). ### Lifecycle When a reservation is created, its size is deducted from the Availability, and when a reservation is deleted, any remaining size (bytes not written to disk) is returned to the Availability. If the request finishes, is cancelled (expired), or an error occurs, the Reservation is deleted (and any undownloaded bytes returned to the Availability). In addition, when the Sales module starts, any Reservations that are not actively being used in a filled slot, are deleted. Having a Reservation persisted until after a storage request is completed, will allow for the originally set Availability size to be reclaimed once a request contract has been completed. This is a feature that is yet to be implemented, however the work in this PR is a step in the direction towards enabling this. ### Unknowns Reservation size is determined by the `StorageAsk.slotSize`. If during download, more bytes than `slotSize` are attempted to be downloaded than this, then the Reservation update will fail, and the state machine will move to a `SaleErrored` state, deleting the Reservation. This will likely prevent the slot from being filled. ### Notes Based on #514
2023-09-29 04:33:08 +00:00
proc createAvailability(): Availability =
let example = Availability.example
let totalSize = rand(100000..200000)
[marketplace] Availability improvements (#535) ## Problem When Availabilities are created, the amount of bytes in the Availability are reserved in the repo, so those bytes on disk cannot be written to otherwise. When a request for storage is received by a node, if a previously created Availability is matched, an attempt will be made to fill a slot in the request (more accurately, the request's slots are added to the SlotQueue, and eventually those slots will be processed). During download, bytes that were reserved for the Availability were released (as they were written to disk). To prevent more bytes from being released than were reserved in the Availability, the Availability was marked as used during the download, so that no other requests would match the Availability, and therefore no new downloads (and byte releases) would begin. The unfortunate downside to this, is that the number of Availabilities a node has determines the download concurrency capacity. If, for example, a node creates a single Availability that covers all available disk space the operator is willing to use, that single Availability would mean that only one download could occur at a time, meaning the node could potentially miss out on storage opportunities. ## Solution To alleviate the concurrency issue, each time a slot is processed, a Reservation is created, which takes size (aka reserved bytes) away from the Availability and stores them in the Reservation object. This can be done as many times as needed as long as there are enough bytes remaining in the Availability. Therefore, concurrent downloads are no longer limited by the number of Availabilities. Instead, they would more likely be limited to the SlotQueue's `maxWorkers`. From a database design perspective, an Availability has zero or more Reservations. Reservations are persisted in the RepoStore's metadata, along with Availabilities. The metadata store key path for Reservations is ` meta / sales / reservations / <availabilityId> / <reservationId>`, while Availabilities are stored one level up, eg `meta / sales / reservations / <availabilityId> `, allowing all Reservations for an Availability to be queried (this is not currently needed, but may be useful when work to restore Availability size is implemented, more on this later). ### Lifecycle When a reservation is created, its size is deducted from the Availability, and when a reservation is deleted, any remaining size (bytes not written to disk) is returned to the Availability. If the request finishes, is cancelled (expired), or an error occurs, the Reservation is deleted (and any undownloaded bytes returned to the Availability). In addition, when the Sales module starts, any Reservations that are not actively being used in a filled slot, are deleted. Having a Reservation persisted until after a storage request is completed, will allow for the originally set Availability size to be reclaimed once a request contract has been completed. This is a feature that is yet to be implemented, however the work in this PR is a step in the direction towards enabling this. ### Unknowns Reservation size is determined by the `StorageAsk.slotSize`. If during download, more bytes than `slotSize` are attempted to be downloaded than this, then the Reservation update will fail, and the state machine will move to a `SaleErrored` state, deleting the Reservation. This will likely prevent the slot from being filled. ### Notes Based on #514
2023-09-29 04:33:08 +00:00
let availability = waitFor reservations.createAvailability(
totalSize.u256,
[marketplace] Availability improvements (#535) ## Problem When Availabilities are created, the amount of bytes in the Availability are reserved in the repo, so those bytes on disk cannot be written to otherwise. When a request for storage is received by a node, if a previously created Availability is matched, an attempt will be made to fill a slot in the request (more accurately, the request's slots are added to the SlotQueue, and eventually those slots will be processed). During download, bytes that were reserved for the Availability were released (as they were written to disk). To prevent more bytes from being released than were reserved in the Availability, the Availability was marked as used during the download, so that no other requests would match the Availability, and therefore no new downloads (and byte releases) would begin. The unfortunate downside to this, is that the number of Availabilities a node has determines the download concurrency capacity. If, for example, a node creates a single Availability that covers all available disk space the operator is willing to use, that single Availability would mean that only one download could occur at a time, meaning the node could potentially miss out on storage opportunities. ## Solution To alleviate the concurrency issue, each time a slot is processed, a Reservation is created, which takes size (aka reserved bytes) away from the Availability and stores them in the Reservation object. This can be done as many times as needed as long as there are enough bytes remaining in the Availability. Therefore, concurrent downloads are no longer limited by the number of Availabilities. Instead, they would more likely be limited to the SlotQueue's `maxWorkers`. From a database design perspective, an Availability has zero or more Reservations. Reservations are persisted in the RepoStore's metadata, along with Availabilities. The metadata store key path for Reservations is ` meta / sales / reservations / <availabilityId> / <reservationId>`, while Availabilities are stored one level up, eg `meta / sales / reservations / <availabilityId> `, allowing all Reservations for an Availability to be queried (this is not currently needed, but may be useful when work to restore Availability size is implemented, more on this later). ### Lifecycle When a reservation is created, its size is deducted from the Availability, and when a reservation is deleted, any remaining size (bytes not written to disk) is returned to the Availability. If the request finishes, is cancelled (expired), or an error occurs, the Reservation is deleted (and any undownloaded bytes returned to the Availability). In addition, when the Sales module starts, any Reservations that are not actively being used in a filled slot, are deleted. Having a Reservation persisted until after a storage request is completed, will allow for the originally set Availability size to be reclaimed once a request contract has been completed. This is a feature that is yet to be implemented, however the work in this PR is a step in the direction towards enabling this. ### Unknowns Reservation size is determined by the `StorageAsk.slotSize`. If during download, more bytes than `slotSize` are attempted to be downloaded than this, then the Reservation update will fail, and the state machine will move to a `SaleErrored` state, deleting the Reservation. This will likely prevent the slot from being filled. ### Notes Based on #514
2023-09-29 04:33:08 +00:00
example.duration,
example.minPrice,
example.maxCollateral
)
return availability.get
proc createReservation(availability: Availability): Reservation =
let size = rand(1..<availability.freeSize.truncate(int))
[marketplace] Availability improvements (#535) ## Problem When Availabilities are created, the amount of bytes in the Availability are reserved in the repo, so those bytes on disk cannot be written to otherwise. When a request for storage is received by a node, if a previously created Availability is matched, an attempt will be made to fill a slot in the request (more accurately, the request's slots are added to the SlotQueue, and eventually those slots will be processed). During download, bytes that were reserved for the Availability were released (as they were written to disk). To prevent more bytes from being released than were reserved in the Availability, the Availability was marked as used during the download, so that no other requests would match the Availability, and therefore no new downloads (and byte releases) would begin. The unfortunate downside to this, is that the number of Availabilities a node has determines the download concurrency capacity. If, for example, a node creates a single Availability that covers all available disk space the operator is willing to use, that single Availability would mean that only one download could occur at a time, meaning the node could potentially miss out on storage opportunities. ## Solution To alleviate the concurrency issue, each time a slot is processed, a Reservation is created, which takes size (aka reserved bytes) away from the Availability and stores them in the Reservation object. This can be done as many times as needed as long as there are enough bytes remaining in the Availability. Therefore, concurrent downloads are no longer limited by the number of Availabilities. Instead, they would more likely be limited to the SlotQueue's `maxWorkers`. From a database design perspective, an Availability has zero or more Reservations. Reservations are persisted in the RepoStore's metadata, along with Availabilities. The metadata store key path for Reservations is ` meta / sales / reservations / <availabilityId> / <reservationId>`, while Availabilities are stored one level up, eg `meta / sales / reservations / <availabilityId> `, allowing all Reservations for an Availability to be queried (this is not currently needed, but may be useful when work to restore Availability size is implemented, more on this later). ### Lifecycle When a reservation is created, its size is deducted from the Availability, and when a reservation is deleted, any remaining size (bytes not written to disk) is returned to the Availability. If the request finishes, is cancelled (expired), or an error occurs, the Reservation is deleted (and any undownloaded bytes returned to the Availability). In addition, when the Sales module starts, any Reservations that are not actively being used in a filled slot, are deleted. Having a Reservation persisted until after a storage request is completed, will allow for the originally set Availability size to be reclaimed once a request contract has been completed. This is a feature that is yet to be implemented, however the work in this PR is a step in the direction towards enabling this. ### Unknowns Reservation size is determined by the `StorageAsk.slotSize`. If during download, more bytes than `slotSize` are attempted to be downloaded than this, then the Reservation update will fail, and the state machine will move to a `SaleErrored` state, deleting the Reservation. This will likely prevent the slot from being filled. ### Notes Based on #514
2023-09-29 04:33:08 +00:00
let reservation = waitFor reservations.createReservation(
availability.id,
size.u256,
RequestId.example,
UInt256.example
)
return reservation.get
[marketplace] Add Reservations Module (#340) * [marketplace] reservations module - add de/serialization for Availability - add markUsed/markUnused in persisted availability - add query for unused - add reserve/release - reservation module tests - split ContractInteractions into client contracts and host contracts - remove reservations start/stop as the repo start/stop is being managed by the node - remove dedicated reservations metadata store and use the metadata store from the repo instead - Split ContractInteractions into: - ClientInteractions (with purchasing) - HostInteractions (with sales and proving) - compilation fix for nim 1.2 [repostore] fix started flag, add tests [marketplace] persist slot index For loading the sales state from chain, the slot index was not previously persisted in the contract. Will retrieve the slot index from the contract when the sales state is loaded. * Revert repostore changes In favour of separate PR https://github.com/status-im/nim-codex/pull/374. * remove warnings * clean up * tests: stop repostore during teardown * change constructor type identifier Change Contracts constructor to accept Contracts type instead of ContractInteractions. * change constructor return type to Result instead of Option * fix and split interactions tests * clean up, fix tests * find availability by slot id * remove duplication in host/client interactions * add test for finding availability by slotId * log instead of raiseAssert when failed to mark availability as unused * move to SaleErrored state instead of raiseAssert * remove unneeded reverse It appears that order is not preserved in the repostore, so reversing does not have the intended effect here. * update open api spec for potential rest endpoint errors * move functions about available bytes to repostore * WIP: reserve and release availabilities as needed WIP: not tested yet Availabilities are marked as used when matched (just before downloading starts) so that future matching logic does not match an availability currently in use. As the download progresses, batches of blocks are written to disk, and the equivalent bytes are released from the reservation module. The size of the availability is reduced as well. During a reserve or release operation, availability updates occur after the repo is manipulated. If the availability update operation fails, the reserve or release is rolled back to maintain correct accounting of bytes. Finally, once download completes, or if an error occurs, the availability is marked as unused so future matching can occur. * delete availability when all bytes released * fix tests + cleanup * remove availability from SalesContext callbacks Availability is no longer used past the SaleDownloading state in the state machine. Cleanup of Availability (marking unused) is handled directly in the SaleDownloading state, and no longer in SaleErrored or SaleFinished. Likewise, Availabilities shouldn’t need to be handled on node restart. Additionally, Availability was being passed in SalesContext callbacks, and now that Availability is only used temporarily in the SaleDownloading state, Availability is contextually irrelevant to the callbacks, except in OnStore possibly, though it was not being consumed. * test clean up * - remove availability from callbacks and constructors from previous commit that needed to be removed (oopsie) - fix integration test that checks availabilities - there was a bug fixed that crashed the node due to a missing `return success` in onStore - the test was fixed by ensuring that availabilities are remaining on the node, and the size has been reduced - change Availability back to non-ref object and constructor back to init - add trace logging of all state transitions in state machine - add generally useful trace logging * fixes after rebase 1. Fix onProve callbacks 2. Use Slot type instead of tuple for retrieving active slot. 3. Bump codex-contracts-eth that exposes getActivceSlot call. * swap contracts branch to not support slot collateral Slot collateral changes in the contracts require further changes in the client code, so we’ll skip those changes for now and add in a separate commit. * modify Interactions and Deployment constructors - `HostInteractions` and `ClientInteractions` constructors were simplified to take a contract address and no overloads - `Interactions` prepared simplified so there are no overloads - `Deployment` constructor updated so that it takes an optional string parameter, instead `Option[string]` * Move `batchProc` declaration `batchProc` needs to be consumed by both `node` and `salescontext`, and they can’t reference each other as it creates a circular dependency. * [reservations] rename `available` to `hasAvailable` * [reservations] default error message to inner error msg * add SaleIngored state When a storage request is handled but the request does match availabilities, the sales agent machine is sent to the SaleIgnored state. In addition, the agent is constructed in a way that if the request is ignored, the sales agent is removed from the list of active agents being tracked in the sales module.
2023-04-04 07:05:16 +00:00
test "availability can be serialised and deserialised":
let availability = Availability.example
[marketplace] Availability improvements (#535) ## Problem When Availabilities are created, the amount of bytes in the Availability are reserved in the repo, so those bytes on disk cannot be written to otherwise. When a request for storage is received by a node, if a previously created Availability is matched, an attempt will be made to fill a slot in the request (more accurately, the request's slots are added to the SlotQueue, and eventually those slots will be processed). During download, bytes that were reserved for the Availability were released (as they were written to disk). To prevent more bytes from being released than were reserved in the Availability, the Availability was marked as used during the download, so that no other requests would match the Availability, and therefore no new downloads (and byte releases) would begin. The unfortunate downside to this, is that the number of Availabilities a node has determines the download concurrency capacity. If, for example, a node creates a single Availability that covers all available disk space the operator is willing to use, that single Availability would mean that only one download could occur at a time, meaning the node could potentially miss out on storage opportunities. ## Solution To alleviate the concurrency issue, each time a slot is processed, a Reservation is created, which takes size (aka reserved bytes) away from the Availability and stores them in the Reservation object. This can be done as many times as needed as long as there are enough bytes remaining in the Availability. Therefore, concurrent downloads are no longer limited by the number of Availabilities. Instead, they would more likely be limited to the SlotQueue's `maxWorkers`. From a database design perspective, an Availability has zero or more Reservations. Reservations are persisted in the RepoStore's metadata, along with Availabilities. The metadata store key path for Reservations is ` meta / sales / reservations / <availabilityId> / <reservationId>`, while Availabilities are stored one level up, eg `meta / sales / reservations / <availabilityId> `, allowing all Reservations for an Availability to be queried (this is not currently needed, but may be useful when work to restore Availability size is implemented, more on this later). ### Lifecycle When a reservation is created, its size is deducted from the Availability, and when a reservation is deleted, any remaining size (bytes not written to disk) is returned to the Availability. If the request finishes, is cancelled (expired), or an error occurs, the Reservation is deleted (and any undownloaded bytes returned to the Availability). In addition, when the Sales module starts, any Reservations that are not actively being used in a filled slot, are deleted. Having a Reservation persisted until after a storage request is completed, will allow for the originally set Availability size to be reclaimed once a request contract has been completed. This is a feature that is yet to be implemented, however the work in this PR is a step in the direction towards enabling this. ### Unknowns Reservation size is determined by the `StorageAsk.slotSize`. If during download, more bytes than `slotSize` are attempted to be downloaded than this, then the Reservation update will fail, and the state machine will move to a `SaleErrored` state, deleting the Reservation. This will likely prevent the slot from being filled. ### Notes Based on #514
2023-09-29 04:33:08 +00:00
let serialised = %availability
check Availability.fromJson(serialised).get == availability
[marketplace] Add Reservations Module (#340) * [marketplace] reservations module - add de/serialization for Availability - add markUsed/markUnused in persisted availability - add query for unused - add reserve/release - reservation module tests - split ContractInteractions into client contracts and host contracts - remove reservations start/stop as the repo start/stop is being managed by the node - remove dedicated reservations metadata store and use the metadata store from the repo instead - Split ContractInteractions into: - ClientInteractions (with purchasing) - HostInteractions (with sales and proving) - compilation fix for nim 1.2 [repostore] fix started flag, add tests [marketplace] persist slot index For loading the sales state from chain, the slot index was not previously persisted in the contract. Will retrieve the slot index from the contract when the sales state is loaded. * Revert repostore changes In favour of separate PR https://github.com/status-im/nim-codex/pull/374. * remove warnings * clean up * tests: stop repostore during teardown * change constructor type identifier Change Contracts constructor to accept Contracts type instead of ContractInteractions. * change constructor return type to Result instead of Option * fix and split interactions tests * clean up, fix tests * find availability by slot id * remove duplication in host/client interactions * add test for finding availability by slotId * log instead of raiseAssert when failed to mark availability as unused * move to SaleErrored state instead of raiseAssert * remove unneeded reverse It appears that order is not preserved in the repostore, so reversing does not have the intended effect here. * update open api spec for potential rest endpoint errors * move functions about available bytes to repostore * WIP: reserve and release availabilities as needed WIP: not tested yet Availabilities are marked as used when matched (just before downloading starts) so that future matching logic does not match an availability currently in use. As the download progresses, batches of blocks are written to disk, and the equivalent bytes are released from the reservation module. The size of the availability is reduced as well. During a reserve or release operation, availability updates occur after the repo is manipulated. If the availability update operation fails, the reserve or release is rolled back to maintain correct accounting of bytes. Finally, once download completes, or if an error occurs, the availability is marked as unused so future matching can occur. * delete availability when all bytes released * fix tests + cleanup * remove availability from SalesContext callbacks Availability is no longer used past the SaleDownloading state in the state machine. Cleanup of Availability (marking unused) is handled directly in the SaleDownloading state, and no longer in SaleErrored or SaleFinished. Likewise, Availabilities shouldn’t need to be handled on node restart. Additionally, Availability was being passed in SalesContext callbacks, and now that Availability is only used temporarily in the SaleDownloading state, Availability is contextually irrelevant to the callbacks, except in OnStore possibly, though it was not being consumed. * test clean up * - remove availability from callbacks and constructors from previous commit that needed to be removed (oopsie) - fix integration test that checks availabilities - there was a bug fixed that crashed the node due to a missing `return success` in onStore - the test was fixed by ensuring that availabilities are remaining on the node, and the size has been reduced - change Availability back to non-ref object and constructor back to init - add trace logging of all state transitions in state machine - add generally useful trace logging * fixes after rebase 1. Fix onProve callbacks 2. Use Slot type instead of tuple for retrieving active slot. 3. Bump codex-contracts-eth that exposes getActivceSlot call. * swap contracts branch to not support slot collateral Slot collateral changes in the contracts require further changes in the client code, so we’ll skip those changes for now and add in a separate commit. * modify Interactions and Deployment constructors - `HostInteractions` and `ClientInteractions` constructors were simplified to take a contract address and no overloads - `Interactions` prepared simplified so there are no overloads - `Deployment` constructor updated so that it takes an optional string parameter, instead `Option[string]` * Move `batchProc` declaration `batchProc` needs to be consumed by both `node` and `salescontext`, and they can’t reference each other as it creates a circular dependency. * [reservations] rename `available` to `hasAvailable` * [reservations] default error message to inner error msg * add SaleIngored state When a storage request is handled but the request does match availabilities, the sales agent machine is sent to the SaleIgnored state. In addition, the agent is constructed in a way that if the request is ignored, the sales agent is removed from the list of active agents being tracked in the sales module.
2023-04-04 07:05:16 +00:00
test "has no availability initially":
[marketplace] Availability improvements (#535) ## Problem When Availabilities are created, the amount of bytes in the Availability are reserved in the repo, so those bytes on disk cannot be written to otherwise. When a request for storage is received by a node, if a previously created Availability is matched, an attempt will be made to fill a slot in the request (more accurately, the request's slots are added to the SlotQueue, and eventually those slots will be processed). During download, bytes that were reserved for the Availability were released (as they were written to disk). To prevent more bytes from being released than were reserved in the Availability, the Availability was marked as used during the download, so that no other requests would match the Availability, and therefore no new downloads (and byte releases) would begin. The unfortunate downside to this, is that the number of Availabilities a node has determines the download concurrency capacity. If, for example, a node creates a single Availability that covers all available disk space the operator is willing to use, that single Availability would mean that only one download could occur at a time, meaning the node could potentially miss out on storage opportunities. ## Solution To alleviate the concurrency issue, each time a slot is processed, a Reservation is created, which takes size (aka reserved bytes) away from the Availability and stores them in the Reservation object. This can be done as many times as needed as long as there are enough bytes remaining in the Availability. Therefore, concurrent downloads are no longer limited by the number of Availabilities. Instead, they would more likely be limited to the SlotQueue's `maxWorkers`. From a database design perspective, an Availability has zero or more Reservations. Reservations are persisted in the RepoStore's metadata, along with Availabilities. The metadata store key path for Reservations is ` meta / sales / reservations / <availabilityId> / <reservationId>`, while Availabilities are stored one level up, eg `meta / sales / reservations / <availabilityId> `, allowing all Reservations for an Availability to be queried (this is not currently needed, but may be useful when work to restore Availability size is implemented, more on this later). ### Lifecycle When a reservation is created, its size is deducted from the Availability, and when a reservation is deleted, any remaining size (bytes not written to disk) is returned to the Availability. If the request finishes, is cancelled (expired), or an error occurs, the Reservation is deleted (and any undownloaded bytes returned to the Availability). In addition, when the Sales module starts, any Reservations that are not actively being used in a filled slot, are deleted. Having a Reservation persisted until after a storage request is completed, will allow for the originally set Availability size to be reclaimed once a request contract has been completed. This is a feature that is yet to be implemented, however the work in this PR is a step in the direction towards enabling this. ### Unknowns Reservation size is determined by the `StorageAsk.slotSize`. If during download, more bytes than `slotSize` are attempted to be downloaded than this, then the Reservation update will fail, and the state machine will move to a `SaleErrored` state, deleting the Reservation. This will likely prevent the slot from being filled. ### Notes Based on #514
2023-09-29 04:33:08 +00:00
check (await reservations.all(Availability)).get.len == 0
[marketplace] Add Reservations Module (#340) * [marketplace] reservations module - add de/serialization for Availability - add markUsed/markUnused in persisted availability - add query for unused - add reserve/release - reservation module tests - split ContractInteractions into client contracts and host contracts - remove reservations start/stop as the repo start/stop is being managed by the node - remove dedicated reservations metadata store and use the metadata store from the repo instead - Split ContractInteractions into: - ClientInteractions (with purchasing) - HostInteractions (with sales and proving) - compilation fix for nim 1.2 [repostore] fix started flag, add tests [marketplace] persist slot index For loading the sales state from chain, the slot index was not previously persisted in the contract. Will retrieve the slot index from the contract when the sales state is loaded. * Revert repostore changes In favour of separate PR https://github.com/status-im/nim-codex/pull/374. * remove warnings * clean up * tests: stop repostore during teardown * change constructor type identifier Change Contracts constructor to accept Contracts type instead of ContractInteractions. * change constructor return type to Result instead of Option * fix and split interactions tests * clean up, fix tests * find availability by slot id * remove duplication in host/client interactions * add test for finding availability by slotId * log instead of raiseAssert when failed to mark availability as unused * move to SaleErrored state instead of raiseAssert * remove unneeded reverse It appears that order is not preserved in the repostore, so reversing does not have the intended effect here. * update open api spec for potential rest endpoint errors * move functions about available bytes to repostore * WIP: reserve and release availabilities as needed WIP: not tested yet Availabilities are marked as used when matched (just before downloading starts) so that future matching logic does not match an availability currently in use. As the download progresses, batches of blocks are written to disk, and the equivalent bytes are released from the reservation module. The size of the availability is reduced as well. During a reserve or release operation, availability updates occur after the repo is manipulated. If the availability update operation fails, the reserve or release is rolled back to maintain correct accounting of bytes. Finally, once download completes, or if an error occurs, the availability is marked as unused so future matching can occur. * delete availability when all bytes released * fix tests + cleanup * remove availability from SalesContext callbacks Availability is no longer used past the SaleDownloading state in the state machine. Cleanup of Availability (marking unused) is handled directly in the SaleDownloading state, and no longer in SaleErrored or SaleFinished. Likewise, Availabilities shouldn’t need to be handled on node restart. Additionally, Availability was being passed in SalesContext callbacks, and now that Availability is only used temporarily in the SaleDownloading state, Availability is contextually irrelevant to the callbacks, except in OnStore possibly, though it was not being consumed. * test clean up * - remove availability from callbacks and constructors from previous commit that needed to be removed (oopsie) - fix integration test that checks availabilities - there was a bug fixed that crashed the node due to a missing `return success` in onStore - the test was fixed by ensuring that availabilities are remaining on the node, and the size has been reduced - change Availability back to non-ref object and constructor back to init - add trace logging of all state transitions in state machine - add generally useful trace logging * fixes after rebase 1. Fix onProve callbacks 2. Use Slot type instead of tuple for retrieving active slot. 3. Bump codex-contracts-eth that exposes getActivceSlot call. * swap contracts branch to not support slot collateral Slot collateral changes in the contracts require further changes in the client code, so we’ll skip those changes for now and add in a separate commit. * modify Interactions and Deployment constructors - `HostInteractions` and `ClientInteractions` constructors were simplified to take a contract address and no overloads - `Interactions` prepared simplified so there are no overloads - `Deployment` constructor updated so that it takes an optional string parameter, instead `Option[string]` * Move `batchProc` declaration `batchProc` needs to be consumed by both `node` and `salescontext`, and they can’t reference each other as it creates a circular dependency. * [reservations] rename `available` to `hasAvailable` * [reservations] default error message to inner error msg * add SaleIngored state When a storage request is handled but the request does match availabilities, the sales agent machine is sent to the SaleIgnored state. In addition, the agent is constructed in a way that if the request is ignored, the sales agent is removed from the list of active agents being tracked in the sales module.
2023-04-04 07:05:16 +00:00
test "generates unique ids for storage availability":
let availability1 = Availability.init(1.u256, 2.u256, 3.u256, 4.u256, 5.u256)
let availability2 = Availability.init(1.u256, 2.u256, 3.u256, 4.u256, 5.u256)
[marketplace] Add Reservations Module (#340) * [marketplace] reservations module - add de/serialization for Availability - add markUsed/markUnused in persisted availability - add query for unused - add reserve/release - reservation module tests - split ContractInteractions into client contracts and host contracts - remove reservations start/stop as the repo start/stop is being managed by the node - remove dedicated reservations metadata store and use the metadata store from the repo instead - Split ContractInteractions into: - ClientInteractions (with purchasing) - HostInteractions (with sales and proving) - compilation fix for nim 1.2 [repostore] fix started flag, add tests [marketplace] persist slot index For loading the sales state from chain, the slot index was not previously persisted in the contract. Will retrieve the slot index from the contract when the sales state is loaded. * Revert repostore changes In favour of separate PR https://github.com/status-im/nim-codex/pull/374. * remove warnings * clean up * tests: stop repostore during teardown * change constructor type identifier Change Contracts constructor to accept Contracts type instead of ContractInteractions. * change constructor return type to Result instead of Option * fix and split interactions tests * clean up, fix tests * find availability by slot id * remove duplication in host/client interactions * add test for finding availability by slotId * log instead of raiseAssert when failed to mark availability as unused * move to SaleErrored state instead of raiseAssert * remove unneeded reverse It appears that order is not preserved in the repostore, so reversing does not have the intended effect here. * update open api spec for potential rest endpoint errors * move functions about available bytes to repostore * WIP: reserve and release availabilities as needed WIP: not tested yet Availabilities are marked as used when matched (just before downloading starts) so that future matching logic does not match an availability currently in use. As the download progresses, batches of blocks are written to disk, and the equivalent bytes are released from the reservation module. The size of the availability is reduced as well. During a reserve or release operation, availability updates occur after the repo is manipulated. If the availability update operation fails, the reserve or release is rolled back to maintain correct accounting of bytes. Finally, once download completes, or if an error occurs, the availability is marked as unused so future matching can occur. * delete availability when all bytes released * fix tests + cleanup * remove availability from SalesContext callbacks Availability is no longer used past the SaleDownloading state in the state machine. Cleanup of Availability (marking unused) is handled directly in the SaleDownloading state, and no longer in SaleErrored or SaleFinished. Likewise, Availabilities shouldn’t need to be handled on node restart. Additionally, Availability was being passed in SalesContext callbacks, and now that Availability is only used temporarily in the SaleDownloading state, Availability is contextually irrelevant to the callbacks, except in OnStore possibly, though it was not being consumed. * test clean up * - remove availability from callbacks and constructors from previous commit that needed to be removed (oopsie) - fix integration test that checks availabilities - there was a bug fixed that crashed the node due to a missing `return success` in onStore - the test was fixed by ensuring that availabilities are remaining on the node, and the size has been reduced - change Availability back to non-ref object and constructor back to init - add trace logging of all state transitions in state machine - add generally useful trace logging * fixes after rebase 1. Fix onProve callbacks 2. Use Slot type instead of tuple for retrieving active slot. 3. Bump codex-contracts-eth that exposes getActivceSlot call. * swap contracts branch to not support slot collateral Slot collateral changes in the contracts require further changes in the client code, so we’ll skip those changes for now and add in a separate commit. * modify Interactions and Deployment constructors - `HostInteractions` and `ClientInteractions` constructors were simplified to take a contract address and no overloads - `Interactions` prepared simplified so there are no overloads - `Deployment` constructor updated so that it takes an optional string parameter, instead `Option[string]` * Move `batchProc` declaration `batchProc` needs to be consumed by both `node` and `salescontext`, and they can’t reference each other as it creates a circular dependency. * [reservations] rename `available` to `hasAvailable` * [reservations] default error message to inner error msg * add SaleIngored state When a storage request is handled but the request does match availabilities, the sales agent machine is sent to the SaleIgnored state. In addition, the agent is constructed in a way that if the request is ignored, the sales agent is removed from the list of active agents being tracked in the sales module.
2023-04-04 07:05:16 +00:00
check availability1.id != availability2.id
test "can reserve available storage":
[marketplace] Availability improvements (#535) ## Problem When Availabilities are created, the amount of bytes in the Availability are reserved in the repo, so those bytes on disk cannot be written to otherwise. When a request for storage is received by a node, if a previously created Availability is matched, an attempt will be made to fill a slot in the request (more accurately, the request's slots are added to the SlotQueue, and eventually those slots will be processed). During download, bytes that were reserved for the Availability were released (as they were written to disk). To prevent more bytes from being released than were reserved in the Availability, the Availability was marked as used during the download, so that no other requests would match the Availability, and therefore no new downloads (and byte releases) would begin. The unfortunate downside to this, is that the number of Availabilities a node has determines the download concurrency capacity. If, for example, a node creates a single Availability that covers all available disk space the operator is willing to use, that single Availability would mean that only one download could occur at a time, meaning the node could potentially miss out on storage opportunities. ## Solution To alleviate the concurrency issue, each time a slot is processed, a Reservation is created, which takes size (aka reserved bytes) away from the Availability and stores them in the Reservation object. This can be done as many times as needed as long as there are enough bytes remaining in the Availability. Therefore, concurrent downloads are no longer limited by the number of Availabilities. Instead, they would more likely be limited to the SlotQueue's `maxWorkers`. From a database design perspective, an Availability has zero or more Reservations. Reservations are persisted in the RepoStore's metadata, along with Availabilities. The metadata store key path for Reservations is ` meta / sales / reservations / <availabilityId> / <reservationId>`, while Availabilities are stored one level up, eg `meta / sales / reservations / <availabilityId> `, allowing all Reservations for an Availability to be queried (this is not currently needed, but may be useful when work to restore Availability size is implemented, more on this later). ### Lifecycle When a reservation is created, its size is deducted from the Availability, and when a reservation is deleted, any remaining size (bytes not written to disk) is returned to the Availability. If the request finishes, is cancelled (expired), or an error occurs, the Reservation is deleted (and any undownloaded bytes returned to the Availability). In addition, when the Sales module starts, any Reservations that are not actively being used in a filled slot, are deleted. Having a Reservation persisted until after a storage request is completed, will allow for the originally set Availability size to be reclaimed once a request contract has been completed. This is a feature that is yet to be implemented, however the work in this PR is a step in the direction towards enabling this. ### Unknowns Reservation size is determined by the `StorageAsk.slotSize`. If during download, more bytes than `slotSize` are attempted to be downloaded than this, then the Reservation update will fail, and the state machine will move to a `SaleErrored` state, deleting the Reservation. This will likely prevent the slot from being filled. ### Notes Based on #514
2023-09-29 04:33:08 +00:00
let availability = createAvailability()
check availability.id != AvailabilityId.default
test "creating availability reserves bytes in repo":
let orig = repo.available
let availability = createAvailability()
check repo.available == (orig.u256 - availability.freeSize).truncate(uint)
[marketplace] Availability improvements (#535) ## Problem When Availabilities are created, the amount of bytes in the Availability are reserved in the repo, so those bytes on disk cannot be written to otherwise. When a request for storage is received by a node, if a previously created Availability is matched, an attempt will be made to fill a slot in the request (more accurately, the request's slots are added to the SlotQueue, and eventually those slots will be processed). During download, bytes that were reserved for the Availability were released (as they were written to disk). To prevent more bytes from being released than were reserved in the Availability, the Availability was marked as used during the download, so that no other requests would match the Availability, and therefore no new downloads (and byte releases) would begin. The unfortunate downside to this, is that the number of Availabilities a node has determines the download concurrency capacity. If, for example, a node creates a single Availability that covers all available disk space the operator is willing to use, that single Availability would mean that only one download could occur at a time, meaning the node could potentially miss out on storage opportunities. ## Solution To alleviate the concurrency issue, each time a slot is processed, a Reservation is created, which takes size (aka reserved bytes) away from the Availability and stores them in the Reservation object. This can be done as many times as needed as long as there are enough bytes remaining in the Availability. Therefore, concurrent downloads are no longer limited by the number of Availabilities. Instead, they would more likely be limited to the SlotQueue's `maxWorkers`. From a database design perspective, an Availability has zero or more Reservations. Reservations are persisted in the RepoStore's metadata, along with Availabilities. The metadata store key path for Reservations is ` meta / sales / reservations / <availabilityId> / <reservationId>`, while Availabilities are stored one level up, eg `meta / sales / reservations / <availabilityId> `, allowing all Reservations for an Availability to be queried (this is not currently needed, but may be useful when work to restore Availability size is implemented, more on this later). ### Lifecycle When a reservation is created, its size is deducted from the Availability, and when a reservation is deleted, any remaining size (bytes not written to disk) is returned to the Availability. If the request finishes, is cancelled (expired), or an error occurs, the Reservation is deleted (and any undownloaded bytes returned to the Availability). In addition, when the Sales module starts, any Reservations that are not actively being used in a filled slot, are deleted. Having a Reservation persisted until after a storage request is completed, will allow for the originally set Availability size to be reclaimed once a request contract has been completed. This is a feature that is yet to be implemented, however the work in this PR is a step in the direction towards enabling this. ### Unknowns Reservation size is determined by the `StorageAsk.slotSize`. If during download, more bytes than `slotSize` are attempted to be downloaded than this, then the Reservation update will fail, and the state machine will move to a `SaleErrored` state, deleting the Reservation. This will likely prevent the slot from being filled. ### Notes Based on #514
2023-09-29 04:33:08 +00:00
test "can get all availabilities":
let availability1 = createAvailability()
let availability2 = createAvailability()
let availabilities = !(await reservations.all(Availability))
[marketplace] Add Reservations Module (#340) * [marketplace] reservations module - add de/serialization for Availability - add markUsed/markUnused in persisted availability - add query for unused - add reserve/release - reservation module tests - split ContractInteractions into client contracts and host contracts - remove reservations start/stop as the repo start/stop is being managed by the node - remove dedicated reservations metadata store and use the metadata store from the repo instead - Split ContractInteractions into: - ClientInteractions (with purchasing) - HostInteractions (with sales and proving) - compilation fix for nim 1.2 [repostore] fix started flag, add tests [marketplace] persist slot index For loading the sales state from chain, the slot index was not previously persisted in the contract. Will retrieve the slot index from the contract when the sales state is loaded. * Revert repostore changes In favour of separate PR https://github.com/status-im/nim-codex/pull/374. * remove warnings * clean up * tests: stop repostore during teardown * change constructor type identifier Change Contracts constructor to accept Contracts type instead of ContractInteractions. * change constructor return type to Result instead of Option * fix and split interactions tests * clean up, fix tests * find availability by slot id * remove duplication in host/client interactions * add test for finding availability by slotId * log instead of raiseAssert when failed to mark availability as unused * move to SaleErrored state instead of raiseAssert * remove unneeded reverse It appears that order is not preserved in the repostore, so reversing does not have the intended effect here. * update open api spec for potential rest endpoint errors * move functions about available bytes to repostore * WIP: reserve and release availabilities as needed WIP: not tested yet Availabilities are marked as used when matched (just before downloading starts) so that future matching logic does not match an availability currently in use. As the download progresses, batches of blocks are written to disk, and the equivalent bytes are released from the reservation module. The size of the availability is reduced as well. During a reserve or release operation, availability updates occur after the repo is manipulated. If the availability update operation fails, the reserve or release is rolled back to maintain correct accounting of bytes. Finally, once download completes, or if an error occurs, the availability is marked as unused so future matching can occur. * delete availability when all bytes released * fix tests + cleanup * remove availability from SalesContext callbacks Availability is no longer used past the SaleDownloading state in the state machine. Cleanup of Availability (marking unused) is handled directly in the SaleDownloading state, and no longer in SaleErrored or SaleFinished. Likewise, Availabilities shouldn’t need to be handled on node restart. Additionally, Availability was being passed in SalesContext callbacks, and now that Availability is only used temporarily in the SaleDownloading state, Availability is contextually irrelevant to the callbacks, except in OnStore possibly, though it was not being consumed. * test clean up * - remove availability from callbacks and constructors from previous commit that needed to be removed (oopsie) - fix integration test that checks availabilities - there was a bug fixed that crashed the node due to a missing `return success` in onStore - the test was fixed by ensuring that availabilities are remaining on the node, and the size has been reduced - change Availability back to non-ref object and constructor back to init - add trace logging of all state transitions in state machine - add generally useful trace logging * fixes after rebase 1. Fix onProve callbacks 2. Use Slot type instead of tuple for retrieving active slot. 3. Bump codex-contracts-eth that exposes getActivceSlot call. * swap contracts branch to not support slot collateral Slot collateral changes in the contracts require further changes in the client code, so we’ll skip those changes for now and add in a separate commit. * modify Interactions and Deployment constructors - `HostInteractions` and `ClientInteractions` constructors were simplified to take a contract address and no overloads - `Interactions` prepared simplified so there are no overloads - `Deployment` constructor updated so that it takes an optional string parameter, instead `Option[string]` * Move `batchProc` declaration `batchProc` needs to be consumed by both `node` and `salescontext`, and they can’t reference each other as it creates a circular dependency. * [reservations] rename `available` to `hasAvailable` * [reservations] default error message to inner error msg * add SaleIngored state When a storage request is handled but the request does match availabilities, the sales agent machine is sent to the SaleIgnored state. In addition, the agent is constructed in a way that if the request is ignored, the sales agent is removed from the list of active agents being tracked in the sales module.
2023-04-04 07:05:16 +00:00
check:
# perform unordered checks
availabilities.len == 2
availabilities.contains(availability1)
availabilities.contains(availability2)
test "reserved availability exists":
[marketplace] Availability improvements (#535) ## Problem When Availabilities are created, the amount of bytes in the Availability are reserved in the repo, so those bytes on disk cannot be written to otherwise. When a request for storage is received by a node, if a previously created Availability is matched, an attempt will be made to fill a slot in the request (more accurately, the request's slots are added to the SlotQueue, and eventually those slots will be processed). During download, bytes that were reserved for the Availability were released (as they were written to disk). To prevent more bytes from being released than were reserved in the Availability, the Availability was marked as used during the download, so that no other requests would match the Availability, and therefore no new downloads (and byte releases) would begin. The unfortunate downside to this, is that the number of Availabilities a node has determines the download concurrency capacity. If, for example, a node creates a single Availability that covers all available disk space the operator is willing to use, that single Availability would mean that only one download could occur at a time, meaning the node could potentially miss out on storage opportunities. ## Solution To alleviate the concurrency issue, each time a slot is processed, a Reservation is created, which takes size (aka reserved bytes) away from the Availability and stores them in the Reservation object. This can be done as many times as needed as long as there are enough bytes remaining in the Availability. Therefore, concurrent downloads are no longer limited by the number of Availabilities. Instead, they would more likely be limited to the SlotQueue's `maxWorkers`. From a database design perspective, an Availability has zero or more Reservations. Reservations are persisted in the RepoStore's metadata, along with Availabilities. The metadata store key path for Reservations is ` meta / sales / reservations / <availabilityId> / <reservationId>`, while Availabilities are stored one level up, eg `meta / sales / reservations / <availabilityId> `, allowing all Reservations for an Availability to be queried (this is not currently needed, but may be useful when work to restore Availability size is implemented, more on this later). ### Lifecycle When a reservation is created, its size is deducted from the Availability, and when a reservation is deleted, any remaining size (bytes not written to disk) is returned to the Availability. If the request finishes, is cancelled (expired), or an error occurs, the Reservation is deleted (and any undownloaded bytes returned to the Availability). In addition, when the Sales module starts, any Reservations that are not actively being used in a filled slot, are deleted. Having a Reservation persisted until after a storage request is completed, will allow for the originally set Availability size to be reclaimed once a request contract has been completed. This is a feature that is yet to be implemented, however the work in this PR is a step in the direction towards enabling this. ### Unknowns Reservation size is determined by the `StorageAsk.slotSize`. If during download, more bytes than `slotSize` are attempted to be downloaded than this, then the Reservation update will fail, and the state machine will move to a `SaleErrored` state, deleting the Reservation. This will likely prevent the slot from being filled. ### Notes Based on #514
2023-09-29 04:33:08 +00:00
let availability = createAvailability()
[marketplace] Add Reservations Module (#340) * [marketplace] reservations module - add de/serialization for Availability - add markUsed/markUnused in persisted availability - add query for unused - add reserve/release - reservation module tests - split ContractInteractions into client contracts and host contracts - remove reservations start/stop as the repo start/stop is being managed by the node - remove dedicated reservations metadata store and use the metadata store from the repo instead - Split ContractInteractions into: - ClientInteractions (with purchasing) - HostInteractions (with sales and proving) - compilation fix for nim 1.2 [repostore] fix started flag, add tests [marketplace] persist slot index For loading the sales state from chain, the slot index was not previously persisted in the contract. Will retrieve the slot index from the contract when the sales state is loaded. * Revert repostore changes In favour of separate PR https://github.com/status-im/nim-codex/pull/374. * remove warnings * clean up * tests: stop repostore during teardown * change constructor type identifier Change Contracts constructor to accept Contracts type instead of ContractInteractions. * change constructor return type to Result instead of Option * fix and split interactions tests * clean up, fix tests * find availability by slot id * remove duplication in host/client interactions * add test for finding availability by slotId * log instead of raiseAssert when failed to mark availability as unused * move to SaleErrored state instead of raiseAssert * remove unneeded reverse It appears that order is not preserved in the repostore, so reversing does not have the intended effect here. * update open api spec for potential rest endpoint errors * move functions about available bytes to repostore * WIP: reserve and release availabilities as needed WIP: not tested yet Availabilities are marked as used when matched (just before downloading starts) so that future matching logic does not match an availability currently in use. As the download progresses, batches of blocks are written to disk, and the equivalent bytes are released from the reservation module. The size of the availability is reduced as well. During a reserve or release operation, availability updates occur after the repo is manipulated. If the availability update operation fails, the reserve or release is rolled back to maintain correct accounting of bytes. Finally, once download completes, or if an error occurs, the availability is marked as unused so future matching can occur. * delete availability when all bytes released * fix tests + cleanup * remove availability from SalesContext callbacks Availability is no longer used past the SaleDownloading state in the state machine. Cleanup of Availability (marking unused) is handled directly in the SaleDownloading state, and no longer in SaleErrored or SaleFinished. Likewise, Availabilities shouldn’t need to be handled on node restart. Additionally, Availability was being passed in SalesContext callbacks, and now that Availability is only used temporarily in the SaleDownloading state, Availability is contextually irrelevant to the callbacks, except in OnStore possibly, though it was not being consumed. * test clean up * - remove availability from callbacks and constructors from previous commit that needed to be removed (oopsie) - fix integration test that checks availabilities - there was a bug fixed that crashed the node due to a missing `return success` in onStore - the test was fixed by ensuring that availabilities are remaining on the node, and the size has been reduced - change Availability back to non-ref object and constructor back to init - add trace logging of all state transitions in state machine - add generally useful trace logging * fixes after rebase 1. Fix onProve callbacks 2. Use Slot type instead of tuple for retrieving active slot. 3. Bump codex-contracts-eth that exposes getActivceSlot call. * swap contracts branch to not support slot collateral Slot collateral changes in the contracts require further changes in the client code, so we’ll skip those changes for now and add in a separate commit. * modify Interactions and Deployment constructors - `HostInteractions` and `ClientInteractions` constructors were simplified to take a contract address and no overloads - `Interactions` prepared simplified so there are no overloads - `Deployment` constructor updated so that it takes an optional string parameter, instead `Option[string]` * Move `batchProc` declaration `batchProc` needs to be consumed by both `node` and `salescontext`, and they can’t reference each other as it creates a circular dependency. * [reservations] rename `available` to `hasAvailable` * [reservations] default error message to inner error msg * add SaleIngored state When a storage request is handled but the request does match availabilities, the sales agent machine is sent to the SaleIgnored state. In addition, the agent is constructed in a way that if the request is ignored, the sales agent is removed from the list of active agents being tracked in the sales module.
2023-04-04 07:05:16 +00:00
let exists = await reservations.exists(availability.key.get)
[marketplace] Add Reservations Module (#340) * [marketplace] reservations module - add de/serialization for Availability - add markUsed/markUnused in persisted availability - add query for unused - add reserve/release - reservation module tests - split ContractInteractions into client contracts and host contracts - remove reservations start/stop as the repo start/stop is being managed by the node - remove dedicated reservations metadata store and use the metadata store from the repo instead - Split ContractInteractions into: - ClientInteractions (with purchasing) - HostInteractions (with sales and proving) - compilation fix for nim 1.2 [repostore] fix started flag, add tests [marketplace] persist slot index For loading the sales state from chain, the slot index was not previously persisted in the contract. Will retrieve the slot index from the contract when the sales state is loaded. * Revert repostore changes In favour of separate PR https://github.com/status-im/nim-codex/pull/374. * remove warnings * clean up * tests: stop repostore during teardown * change constructor type identifier Change Contracts constructor to accept Contracts type instead of ContractInteractions. * change constructor return type to Result instead of Option * fix and split interactions tests * clean up, fix tests * find availability by slot id * remove duplication in host/client interactions * add test for finding availability by slotId * log instead of raiseAssert when failed to mark availability as unused * move to SaleErrored state instead of raiseAssert * remove unneeded reverse It appears that order is not preserved in the repostore, so reversing does not have the intended effect here. * update open api spec for potential rest endpoint errors * move functions about available bytes to repostore * WIP: reserve and release availabilities as needed WIP: not tested yet Availabilities are marked as used when matched (just before downloading starts) so that future matching logic does not match an availability currently in use. As the download progresses, batches of blocks are written to disk, and the equivalent bytes are released from the reservation module. The size of the availability is reduced as well. During a reserve or release operation, availability updates occur after the repo is manipulated. If the availability update operation fails, the reserve or release is rolled back to maintain correct accounting of bytes. Finally, once download completes, or if an error occurs, the availability is marked as unused so future matching can occur. * delete availability when all bytes released * fix tests + cleanup * remove availability from SalesContext callbacks Availability is no longer used past the SaleDownloading state in the state machine. Cleanup of Availability (marking unused) is handled directly in the SaleDownloading state, and no longer in SaleErrored or SaleFinished. Likewise, Availabilities shouldn’t need to be handled on node restart. Additionally, Availability was being passed in SalesContext callbacks, and now that Availability is only used temporarily in the SaleDownloading state, Availability is contextually irrelevant to the callbacks, except in OnStore possibly, though it was not being consumed. * test clean up * - remove availability from callbacks and constructors from previous commit that needed to be removed (oopsie) - fix integration test that checks availabilities - there was a bug fixed that crashed the node due to a missing `return success` in onStore - the test was fixed by ensuring that availabilities are remaining on the node, and the size has been reduced - change Availability back to non-ref object and constructor back to init - add trace logging of all state transitions in state machine - add generally useful trace logging * fixes after rebase 1. Fix onProve callbacks 2. Use Slot type instead of tuple for retrieving active slot. 3. Bump codex-contracts-eth that exposes getActivceSlot call. * swap contracts branch to not support slot collateral Slot collateral changes in the contracts require further changes in the client code, so we’ll skip those changes for now and add in a separate commit. * modify Interactions and Deployment constructors - `HostInteractions` and `ClientInteractions` constructors were simplified to take a contract address and no overloads - `Interactions` prepared simplified so there are no overloads - `Deployment` constructor updated so that it takes an optional string parameter, instead `Option[string]` * Move `batchProc` declaration `batchProc` needs to be consumed by both `node` and `salescontext`, and they can’t reference each other as it creates a circular dependency. * [reservations] rename `available` to `hasAvailable` * [reservations] default error message to inner error msg * add SaleIngored state When a storage request is handled but the request does match availabilities, the sales agent machine is sent to the SaleIgnored state. In addition, the agent is constructed in a way that if the request is ignored, the sales agent is removed from the list of active agents being tracked in the sales module.
2023-04-04 07:05:16 +00:00
check exists
[marketplace] Availability improvements (#535) ## Problem When Availabilities are created, the amount of bytes in the Availability are reserved in the repo, so those bytes on disk cannot be written to otherwise. When a request for storage is received by a node, if a previously created Availability is matched, an attempt will be made to fill a slot in the request (more accurately, the request's slots are added to the SlotQueue, and eventually those slots will be processed). During download, bytes that were reserved for the Availability were released (as they were written to disk). To prevent more bytes from being released than were reserved in the Availability, the Availability was marked as used during the download, so that no other requests would match the Availability, and therefore no new downloads (and byte releases) would begin. The unfortunate downside to this, is that the number of Availabilities a node has determines the download concurrency capacity. If, for example, a node creates a single Availability that covers all available disk space the operator is willing to use, that single Availability would mean that only one download could occur at a time, meaning the node could potentially miss out on storage opportunities. ## Solution To alleviate the concurrency issue, each time a slot is processed, a Reservation is created, which takes size (aka reserved bytes) away from the Availability and stores them in the Reservation object. This can be done as many times as needed as long as there are enough bytes remaining in the Availability. Therefore, concurrent downloads are no longer limited by the number of Availabilities. Instead, they would more likely be limited to the SlotQueue's `maxWorkers`. From a database design perspective, an Availability has zero or more Reservations. Reservations are persisted in the RepoStore's metadata, along with Availabilities. The metadata store key path for Reservations is ` meta / sales / reservations / <availabilityId> / <reservationId>`, while Availabilities are stored one level up, eg `meta / sales / reservations / <availabilityId> `, allowing all Reservations for an Availability to be queried (this is not currently needed, but may be useful when work to restore Availability size is implemented, more on this later). ### Lifecycle When a reservation is created, its size is deducted from the Availability, and when a reservation is deleted, any remaining size (bytes not written to disk) is returned to the Availability. If the request finishes, is cancelled (expired), or an error occurs, the Reservation is deleted (and any undownloaded bytes returned to the Availability). In addition, when the Sales module starts, any Reservations that are not actively being used in a filled slot, are deleted. Having a Reservation persisted until after a storage request is completed, will allow for the originally set Availability size to be reclaimed once a request contract has been completed. This is a feature that is yet to be implemented, however the work in this PR is a step in the direction towards enabling this. ### Unknowns Reservation size is determined by the `StorageAsk.slotSize`. If during download, more bytes than `slotSize` are attempted to be downloaded than this, then the Reservation update will fail, and the state machine will move to a `SaleErrored` state, deleting the Reservation. This will likely prevent the slot from being filled. ### Notes Based on #514
2023-09-29 04:33:08 +00:00
test "reservation can be created":
let availability = createAvailability()
let reservation = createReservation(availability)
check reservation.id != ReservationId.default
test "can get all reservations":
let availability1 = createAvailability()
let availability2 = createAvailability()
let reservation1 = createReservation(availability1)
let reservation2 = createReservation(availability2)
let availabilities = !(await reservations.all(Availability))
let reservations = !(await reservations.all(Reservation))
check:
# perform unordered checks
availabilities.len == 2
reservations.len == 2
reservations.contains(reservation1)
reservations.contains(reservation2)
[marketplace] Add Reservations Module (#340) * [marketplace] reservations module - add de/serialization for Availability - add markUsed/markUnused in persisted availability - add query for unused - add reserve/release - reservation module tests - split ContractInteractions into client contracts and host contracts - remove reservations start/stop as the repo start/stop is being managed by the node - remove dedicated reservations metadata store and use the metadata store from the repo instead - Split ContractInteractions into: - ClientInteractions (with purchasing) - HostInteractions (with sales and proving) - compilation fix for nim 1.2 [repostore] fix started flag, add tests [marketplace] persist slot index For loading the sales state from chain, the slot index was not previously persisted in the contract. Will retrieve the slot index from the contract when the sales state is loaded. * Revert repostore changes In favour of separate PR https://github.com/status-im/nim-codex/pull/374. * remove warnings * clean up * tests: stop repostore during teardown * change constructor type identifier Change Contracts constructor to accept Contracts type instead of ContractInteractions. * change constructor return type to Result instead of Option * fix and split interactions tests * clean up, fix tests * find availability by slot id * remove duplication in host/client interactions * add test for finding availability by slotId * log instead of raiseAssert when failed to mark availability as unused * move to SaleErrored state instead of raiseAssert * remove unneeded reverse It appears that order is not preserved in the repostore, so reversing does not have the intended effect here. * update open api spec for potential rest endpoint errors * move functions about available bytes to repostore * WIP: reserve and release availabilities as needed WIP: not tested yet Availabilities are marked as used when matched (just before downloading starts) so that future matching logic does not match an availability currently in use. As the download progresses, batches of blocks are written to disk, and the equivalent bytes are released from the reservation module. The size of the availability is reduced as well. During a reserve or release operation, availability updates occur after the repo is manipulated. If the availability update operation fails, the reserve or release is rolled back to maintain correct accounting of bytes. Finally, once download completes, or if an error occurs, the availability is marked as unused so future matching can occur. * delete availability when all bytes released * fix tests + cleanup * remove availability from SalesContext callbacks Availability is no longer used past the SaleDownloading state in the state machine. Cleanup of Availability (marking unused) is handled directly in the SaleDownloading state, and no longer in SaleErrored or SaleFinished. Likewise, Availabilities shouldn’t need to be handled on node restart. Additionally, Availability was being passed in SalesContext callbacks, and now that Availability is only used temporarily in the SaleDownloading state, Availability is contextually irrelevant to the callbacks, except in OnStore possibly, though it was not being consumed. * test clean up * - remove availability from callbacks and constructors from previous commit that needed to be removed (oopsie) - fix integration test that checks availabilities - there was a bug fixed that crashed the node due to a missing `return success` in onStore - the test was fixed by ensuring that availabilities are remaining on the node, and the size has been reduced - change Availability back to non-ref object and constructor back to init - add trace logging of all state transitions in state machine - add generally useful trace logging * fixes after rebase 1. Fix onProve callbacks 2. Use Slot type instead of tuple for retrieving active slot. 3. Bump codex-contracts-eth that exposes getActivceSlot call. * swap contracts branch to not support slot collateral Slot collateral changes in the contracts require further changes in the client code, so we’ll skip those changes for now and add in a separate commit. * modify Interactions and Deployment constructors - `HostInteractions` and `ClientInteractions` constructors were simplified to take a contract address and no overloads - `Interactions` prepared simplified so there are no overloads - `Deployment` constructor updated so that it takes an optional string parameter, instead `Option[string]` * Move `batchProc` declaration `batchProc` needs to be consumed by both `node` and `salescontext`, and they can’t reference each other as it creates a circular dependency. * [reservations] rename `available` to `hasAvailable` * [reservations] default error message to inner error msg * add SaleIngored state When a storage request is handled but the request does match availabilities, the sales agent machine is sent to the SaleIgnored state. In addition, the agent is constructed in a way that if the request is ignored, the sales agent is removed from the list of active agents being tracked in the sales module.
2023-04-04 07:05:16 +00:00
test "can get reservations of specific availability":
let availability1 = createAvailability()
let availability2 = createAvailability()
let reservation1 = createReservation(availability1)
let reservation2 = createReservation(availability2)
let reservations = !(await reservations.all(Reservation, availability1.id))
check:
# perform unordered checks
reservations.len == 1
reservations.contains(reservation1)
not reservations.contains(reservation2)
[marketplace] Availability improvements (#535) ## Problem When Availabilities are created, the amount of bytes in the Availability are reserved in the repo, so those bytes on disk cannot be written to otherwise. When a request for storage is received by a node, if a previously created Availability is matched, an attempt will be made to fill a slot in the request (more accurately, the request's slots are added to the SlotQueue, and eventually those slots will be processed). During download, bytes that were reserved for the Availability were released (as they were written to disk). To prevent more bytes from being released than were reserved in the Availability, the Availability was marked as used during the download, so that no other requests would match the Availability, and therefore no new downloads (and byte releases) would begin. The unfortunate downside to this, is that the number of Availabilities a node has determines the download concurrency capacity. If, for example, a node creates a single Availability that covers all available disk space the operator is willing to use, that single Availability would mean that only one download could occur at a time, meaning the node could potentially miss out on storage opportunities. ## Solution To alleviate the concurrency issue, each time a slot is processed, a Reservation is created, which takes size (aka reserved bytes) away from the Availability and stores them in the Reservation object. This can be done as many times as needed as long as there are enough bytes remaining in the Availability. Therefore, concurrent downloads are no longer limited by the number of Availabilities. Instead, they would more likely be limited to the SlotQueue's `maxWorkers`. From a database design perspective, an Availability has zero or more Reservations. Reservations are persisted in the RepoStore's metadata, along with Availabilities. The metadata store key path for Reservations is ` meta / sales / reservations / <availabilityId> / <reservationId>`, while Availabilities are stored one level up, eg `meta / sales / reservations / <availabilityId> `, allowing all Reservations for an Availability to be queried (this is not currently needed, but may be useful when work to restore Availability size is implemented, more on this later). ### Lifecycle When a reservation is created, its size is deducted from the Availability, and when a reservation is deleted, any remaining size (bytes not written to disk) is returned to the Availability. If the request finishes, is cancelled (expired), or an error occurs, the Reservation is deleted (and any undownloaded bytes returned to the Availability). In addition, when the Sales module starts, any Reservations that are not actively being used in a filled slot, are deleted. Having a Reservation persisted until after a storage request is completed, will allow for the originally set Availability size to be reclaimed once a request contract has been completed. This is a feature that is yet to be implemented, however the work in this PR is a step in the direction towards enabling this. ### Unknowns Reservation size is determined by the `StorageAsk.slotSize`. If during download, more bytes than `slotSize` are attempted to be downloaded than this, then the Reservation update will fail, and the state machine will move to a `SaleErrored` state, deleting the Reservation. This will likely prevent the slot from being filled. ### Notes Based on #514
2023-09-29 04:33:08 +00:00
test "cannot create reservation with non-existant availability":
let availability = Availability.example
let created = await reservations.createReservation(
availability.id,
UInt256.example,
RequestId.example,
UInt256.example
)
check created.isErr
check created.error of NotExistsError
test "cannot create reservation larger than availability size":
let availability = createAvailability()
let created = await reservations.createReservation(
availability.id,
availability.totalSize + 1,
[marketplace] Availability improvements (#535) ## Problem When Availabilities are created, the amount of bytes in the Availability are reserved in the repo, so those bytes on disk cannot be written to otherwise. When a request for storage is received by a node, if a previously created Availability is matched, an attempt will be made to fill a slot in the request (more accurately, the request's slots are added to the SlotQueue, and eventually those slots will be processed). During download, bytes that were reserved for the Availability were released (as they were written to disk). To prevent more bytes from being released than were reserved in the Availability, the Availability was marked as used during the download, so that no other requests would match the Availability, and therefore no new downloads (and byte releases) would begin. The unfortunate downside to this, is that the number of Availabilities a node has determines the download concurrency capacity. If, for example, a node creates a single Availability that covers all available disk space the operator is willing to use, that single Availability would mean that only one download could occur at a time, meaning the node could potentially miss out on storage opportunities. ## Solution To alleviate the concurrency issue, each time a slot is processed, a Reservation is created, which takes size (aka reserved bytes) away from the Availability and stores them in the Reservation object. This can be done as many times as needed as long as there are enough bytes remaining in the Availability. Therefore, concurrent downloads are no longer limited by the number of Availabilities. Instead, they would more likely be limited to the SlotQueue's `maxWorkers`. From a database design perspective, an Availability has zero or more Reservations. Reservations are persisted in the RepoStore's metadata, along with Availabilities. The metadata store key path for Reservations is ` meta / sales / reservations / <availabilityId> / <reservationId>`, while Availabilities are stored one level up, eg `meta / sales / reservations / <availabilityId> `, allowing all Reservations for an Availability to be queried (this is not currently needed, but may be useful when work to restore Availability size is implemented, more on this later). ### Lifecycle When a reservation is created, its size is deducted from the Availability, and when a reservation is deleted, any remaining size (bytes not written to disk) is returned to the Availability. If the request finishes, is cancelled (expired), or an error occurs, the Reservation is deleted (and any undownloaded bytes returned to the Availability). In addition, when the Sales module starts, any Reservations that are not actively being used in a filled slot, are deleted. Having a Reservation persisted until after a storage request is completed, will allow for the originally set Availability size to be reclaimed once a request contract has been completed. This is a feature that is yet to be implemented, however the work in this PR is a step in the direction towards enabling this. ### Unknowns Reservation size is determined by the `StorageAsk.slotSize`. If during download, more bytes than `slotSize` are attempted to be downloaded than this, then the Reservation update will fail, and the state machine will move to a `SaleErrored` state, deleting the Reservation. This will likely prevent the slot from being filled. ### Notes Based on #514
2023-09-29 04:33:08 +00:00
RequestId.example,
UInt256.example
)
check created.isErr
check created.error of BytesOutOfBoundsError
test "creating reservation reduces availability size":
let availability = createAvailability()
let orig = availability.freeSize
[marketplace] Availability improvements (#535) ## Problem When Availabilities are created, the amount of bytes in the Availability are reserved in the repo, so those bytes on disk cannot be written to otherwise. When a request for storage is received by a node, if a previously created Availability is matched, an attempt will be made to fill a slot in the request (more accurately, the request's slots are added to the SlotQueue, and eventually those slots will be processed). During download, bytes that were reserved for the Availability were released (as they were written to disk). To prevent more bytes from being released than were reserved in the Availability, the Availability was marked as used during the download, so that no other requests would match the Availability, and therefore no new downloads (and byte releases) would begin. The unfortunate downside to this, is that the number of Availabilities a node has determines the download concurrency capacity. If, for example, a node creates a single Availability that covers all available disk space the operator is willing to use, that single Availability would mean that only one download could occur at a time, meaning the node could potentially miss out on storage opportunities. ## Solution To alleviate the concurrency issue, each time a slot is processed, a Reservation is created, which takes size (aka reserved bytes) away from the Availability and stores them in the Reservation object. This can be done as many times as needed as long as there are enough bytes remaining in the Availability. Therefore, concurrent downloads are no longer limited by the number of Availabilities. Instead, they would more likely be limited to the SlotQueue's `maxWorkers`. From a database design perspective, an Availability has zero or more Reservations. Reservations are persisted in the RepoStore's metadata, along with Availabilities. The metadata store key path for Reservations is ` meta / sales / reservations / <availabilityId> / <reservationId>`, while Availabilities are stored one level up, eg `meta / sales / reservations / <availabilityId> `, allowing all Reservations for an Availability to be queried (this is not currently needed, but may be useful when work to restore Availability size is implemented, more on this later). ### Lifecycle When a reservation is created, its size is deducted from the Availability, and when a reservation is deleted, any remaining size (bytes not written to disk) is returned to the Availability. If the request finishes, is cancelled (expired), or an error occurs, the Reservation is deleted (and any undownloaded bytes returned to the Availability). In addition, when the Sales module starts, any Reservations that are not actively being used in a filled slot, are deleted. Having a Reservation persisted until after a storage request is completed, will allow for the originally set Availability size to be reclaimed once a request contract has been completed. This is a feature that is yet to be implemented, however the work in this PR is a step in the direction towards enabling this. ### Unknowns Reservation size is determined by the `StorageAsk.slotSize`. If during download, more bytes than `slotSize` are attempted to be downloaded than this, then the Reservation update will fail, and the state machine will move to a `SaleErrored` state, deleting the Reservation. This will likely prevent the slot from being filled. ### Notes Based on #514
2023-09-29 04:33:08 +00:00
let reservation = createReservation(availability)
let key = availability.id.key.get
let updated = (await reservations.get(key, Availability)).get
check updated.freeSize == orig - reservation.size
[marketplace] Availability improvements (#535) ## Problem When Availabilities are created, the amount of bytes in the Availability are reserved in the repo, so those bytes on disk cannot be written to otherwise. When a request for storage is received by a node, if a previously created Availability is matched, an attempt will be made to fill a slot in the request (more accurately, the request's slots are added to the SlotQueue, and eventually those slots will be processed). During download, bytes that were reserved for the Availability were released (as they were written to disk). To prevent more bytes from being released than were reserved in the Availability, the Availability was marked as used during the download, so that no other requests would match the Availability, and therefore no new downloads (and byte releases) would begin. The unfortunate downside to this, is that the number of Availabilities a node has determines the download concurrency capacity. If, for example, a node creates a single Availability that covers all available disk space the operator is willing to use, that single Availability would mean that only one download could occur at a time, meaning the node could potentially miss out on storage opportunities. ## Solution To alleviate the concurrency issue, each time a slot is processed, a Reservation is created, which takes size (aka reserved bytes) away from the Availability and stores them in the Reservation object. This can be done as many times as needed as long as there are enough bytes remaining in the Availability. Therefore, concurrent downloads are no longer limited by the number of Availabilities. Instead, they would more likely be limited to the SlotQueue's `maxWorkers`. From a database design perspective, an Availability has zero or more Reservations. Reservations are persisted in the RepoStore's metadata, along with Availabilities. The metadata store key path for Reservations is ` meta / sales / reservations / <availabilityId> / <reservationId>`, while Availabilities are stored one level up, eg `meta / sales / reservations / <availabilityId> `, allowing all Reservations for an Availability to be queried (this is not currently needed, but may be useful when work to restore Availability size is implemented, more on this later). ### Lifecycle When a reservation is created, its size is deducted from the Availability, and when a reservation is deleted, any remaining size (bytes not written to disk) is returned to the Availability. If the request finishes, is cancelled (expired), or an error occurs, the Reservation is deleted (and any undownloaded bytes returned to the Availability). In addition, when the Sales module starts, any Reservations that are not actively being used in a filled slot, are deleted. Having a Reservation persisted until after a storage request is completed, will allow for the originally set Availability size to be reclaimed once a request contract has been completed. This is a feature that is yet to be implemented, however the work in this PR is a step in the direction towards enabling this. ### Unknowns Reservation size is determined by the `StorageAsk.slotSize`. If during download, more bytes than `slotSize` are attempted to be downloaded than this, then the Reservation update will fail, and the state machine will move to a `SaleErrored` state, deleting the Reservation. This will likely prevent the slot from being filled. ### Notes Based on #514
2023-09-29 04:33:08 +00:00
test "can check if reservation exists":
let availability = createAvailability()
let reservation = createReservation(availability)
let key = reservation.key.get
check await reservations.exists(key)
test "non-existant availability does not exist":
let key = AvailabilityId.example.key.get
check not (await reservations.exists(key))
test "non-existant reservation does not exist":
let key = key(ReservationId.example, AvailabilityId.example).get
check not (await reservations.exists(key))
test "can check if availability exists":
let availability = createAvailability()
let key = availability.key.get
check await reservations.exists(key)
test "can delete reservation":
let availability = createAvailability()
let reservation = createReservation(availability)
check isOk (await reservations.deleteReservation(
reservation.id, reservation.availabilityId)
)
let key = reservation.key.get
check not (await reservations.exists(key))
test "deleting reservation returns bytes back to availability":
let availability = createAvailability()
let orig = availability.freeSize
[marketplace] Availability improvements (#535) ## Problem When Availabilities are created, the amount of bytes in the Availability are reserved in the repo, so those bytes on disk cannot be written to otherwise. When a request for storage is received by a node, if a previously created Availability is matched, an attempt will be made to fill a slot in the request (more accurately, the request's slots are added to the SlotQueue, and eventually those slots will be processed). During download, bytes that were reserved for the Availability were released (as they were written to disk). To prevent more bytes from being released than were reserved in the Availability, the Availability was marked as used during the download, so that no other requests would match the Availability, and therefore no new downloads (and byte releases) would begin. The unfortunate downside to this, is that the number of Availabilities a node has determines the download concurrency capacity. If, for example, a node creates a single Availability that covers all available disk space the operator is willing to use, that single Availability would mean that only one download could occur at a time, meaning the node could potentially miss out on storage opportunities. ## Solution To alleviate the concurrency issue, each time a slot is processed, a Reservation is created, which takes size (aka reserved bytes) away from the Availability and stores them in the Reservation object. This can be done as many times as needed as long as there are enough bytes remaining in the Availability. Therefore, concurrent downloads are no longer limited by the number of Availabilities. Instead, they would more likely be limited to the SlotQueue's `maxWorkers`. From a database design perspective, an Availability has zero or more Reservations. Reservations are persisted in the RepoStore's metadata, along with Availabilities. The metadata store key path for Reservations is ` meta / sales / reservations / <availabilityId> / <reservationId>`, while Availabilities are stored one level up, eg `meta / sales / reservations / <availabilityId> `, allowing all Reservations for an Availability to be queried (this is not currently needed, but may be useful when work to restore Availability size is implemented, more on this later). ### Lifecycle When a reservation is created, its size is deducted from the Availability, and when a reservation is deleted, any remaining size (bytes not written to disk) is returned to the Availability. If the request finishes, is cancelled (expired), or an error occurs, the Reservation is deleted (and any undownloaded bytes returned to the Availability). In addition, when the Sales module starts, any Reservations that are not actively being used in a filled slot, are deleted. Having a Reservation persisted until after a storage request is completed, will allow for the originally set Availability size to be reclaimed once a request contract has been completed. This is a feature that is yet to be implemented, however the work in this PR is a step in the direction towards enabling this. ### Unknowns Reservation size is determined by the `StorageAsk.slotSize`. If during download, more bytes than `slotSize` are attempted to be downloaded than this, then the Reservation update will fail, and the state machine will move to a `SaleErrored` state, deleting the Reservation. This will likely prevent the slot from being filled. ### Notes Based on #514
2023-09-29 04:33:08 +00:00
let reservation = createReservation(availability)
discard await reservations.deleteReservation(
reservation.id, reservation.availabilityId
)
let key = availability.key.get
let updated = !(await reservations.get(key, Availability))
check updated.freeSize == orig
[marketplace] Availability improvements (#535) ## Problem When Availabilities are created, the amount of bytes in the Availability are reserved in the repo, so those bytes on disk cannot be written to otherwise. When a request for storage is received by a node, if a previously created Availability is matched, an attempt will be made to fill a slot in the request (more accurately, the request's slots are added to the SlotQueue, and eventually those slots will be processed). During download, bytes that were reserved for the Availability were released (as they were written to disk). To prevent more bytes from being released than were reserved in the Availability, the Availability was marked as used during the download, so that no other requests would match the Availability, and therefore no new downloads (and byte releases) would begin. The unfortunate downside to this, is that the number of Availabilities a node has determines the download concurrency capacity. If, for example, a node creates a single Availability that covers all available disk space the operator is willing to use, that single Availability would mean that only one download could occur at a time, meaning the node could potentially miss out on storage opportunities. ## Solution To alleviate the concurrency issue, each time a slot is processed, a Reservation is created, which takes size (aka reserved bytes) away from the Availability and stores them in the Reservation object. This can be done as many times as needed as long as there are enough bytes remaining in the Availability. Therefore, concurrent downloads are no longer limited by the number of Availabilities. Instead, they would more likely be limited to the SlotQueue's `maxWorkers`. From a database design perspective, an Availability has zero or more Reservations. Reservations are persisted in the RepoStore's metadata, along with Availabilities. The metadata store key path for Reservations is ` meta / sales / reservations / <availabilityId> / <reservationId>`, while Availabilities are stored one level up, eg `meta / sales / reservations / <availabilityId> `, allowing all Reservations for an Availability to be queried (this is not currently needed, but may be useful when work to restore Availability size is implemented, more on this later). ### Lifecycle When a reservation is created, its size is deducted from the Availability, and when a reservation is deleted, any remaining size (bytes not written to disk) is returned to the Availability. If the request finishes, is cancelled (expired), or an error occurs, the Reservation is deleted (and any undownloaded bytes returned to the Availability). In addition, when the Sales module starts, any Reservations that are not actively being used in a filled slot, are deleted. Having a Reservation persisted until after a storage request is completed, will allow for the originally set Availability size to be reclaimed once a request contract has been completed. This is a feature that is yet to be implemented, however the work in this PR is a step in the direction towards enabling this. ### Unknowns Reservation size is determined by the `StorageAsk.slotSize`. If during download, more bytes than `slotSize` are attempted to be downloaded than this, then the Reservation update will fail, and the state machine will move to a `SaleErrored` state, deleting the Reservation. This will likely prevent the slot from being filled. ### Notes Based on #514
2023-09-29 04:33:08 +00:00
test "calling returnBytesToAvailability returns bytes back to availability":
let availability = createAvailability()
let reservation = createReservation(availability)
let orig = availability.freeSize - reservation.size
let origQuota = repo.quotaReservedBytes
let returnedBytes = reservation.size + 200.u256
check isOk await reservations.returnBytesToAvailability(
reservation.availabilityId, reservation.id, returnedBytes
)
let key = availability.key.get
let updated = !(await reservations.get(key, Availability))
check updated.freeSize > orig
check (updated.freeSize - orig) == 200.u256
check (repo.quotaReservedBytes - origQuota) == 200
test "update releases quota when lowering size":
let
availability = createAvailability()
origQuota = repo.quotaReservedBytes
availability.totalSize = availability.totalSize - 100
check isOk await reservations.update(availability)
check (origQuota - repo.quotaReservedBytes) == 100
test "update reserves quota when growing size":
let
availability = createAvailability()
origQuota = repo.quotaReservedBytes
availability.totalSize = availability.totalSize + 100
check isOk await reservations.update(availability)
check (repo.quotaReservedBytes - origQuota) == 100
[marketplace] Availability improvements (#535) ## Problem When Availabilities are created, the amount of bytes in the Availability are reserved in the repo, so those bytes on disk cannot be written to otherwise. When a request for storage is received by a node, if a previously created Availability is matched, an attempt will be made to fill a slot in the request (more accurately, the request's slots are added to the SlotQueue, and eventually those slots will be processed). During download, bytes that were reserved for the Availability were released (as they were written to disk). To prevent more bytes from being released than were reserved in the Availability, the Availability was marked as used during the download, so that no other requests would match the Availability, and therefore no new downloads (and byte releases) would begin. The unfortunate downside to this, is that the number of Availabilities a node has determines the download concurrency capacity. If, for example, a node creates a single Availability that covers all available disk space the operator is willing to use, that single Availability would mean that only one download could occur at a time, meaning the node could potentially miss out on storage opportunities. ## Solution To alleviate the concurrency issue, each time a slot is processed, a Reservation is created, which takes size (aka reserved bytes) away from the Availability and stores them in the Reservation object. This can be done as many times as needed as long as there are enough bytes remaining in the Availability. Therefore, concurrent downloads are no longer limited by the number of Availabilities. Instead, they would more likely be limited to the SlotQueue's `maxWorkers`. From a database design perspective, an Availability has zero or more Reservations. Reservations are persisted in the RepoStore's metadata, along with Availabilities. The metadata store key path for Reservations is ` meta / sales / reservations / <availabilityId> / <reservationId>`, while Availabilities are stored one level up, eg `meta / sales / reservations / <availabilityId> `, allowing all Reservations for an Availability to be queried (this is not currently needed, but may be useful when work to restore Availability size is implemented, more on this later). ### Lifecycle When a reservation is created, its size is deducted from the Availability, and when a reservation is deleted, any remaining size (bytes not written to disk) is returned to the Availability. If the request finishes, is cancelled (expired), or an error occurs, the Reservation is deleted (and any undownloaded bytes returned to the Availability). In addition, when the Sales module starts, any Reservations that are not actively being used in a filled slot, are deleted. Having a Reservation persisted until after a storage request is completed, will allow for the originally set Availability size to be reclaimed once a request contract has been completed. This is a feature that is yet to be implemented, however the work in this PR is a step in the direction towards enabling this. ### Unknowns Reservation size is determined by the `StorageAsk.slotSize`. If during download, more bytes than `slotSize` are attempted to be downloaded than this, then the Reservation update will fail, and the state machine will move to a `SaleErrored` state, deleting the Reservation. This will likely prevent the slot from being filled. ### Notes Based on #514
2023-09-29 04:33:08 +00:00
test "reservation can be partially released":
let availability = createAvailability()
let reservation = createReservation(availability)
check isOk await reservations.release(
reservation.id,
reservation.availabilityId,
1
)
let key = reservation.key.get
let updated = !(await reservations.get(key, Reservation))
check updated.size == reservation.size - 1
test "cannot release more bytes than size of reservation":
let availability = createAvailability()
let reservation = createReservation(availability)
let updated = await reservations.release(
reservation.id,
reservation.availabilityId,
(reservation.size + 1).truncate(uint)
)
check updated.isErr
check updated.error of BytesOutOfBoundsError
test "cannot release bytes from non-existant reservation":
let availability = createAvailability()
let reservation = createReservation(availability)
let updated = await reservations.release(
ReservationId.example,
availability.id,
1
)
check updated.isErr
check updated.error of NotExistsError
test "onAvailabilityAdded called when availability is reserved":
var added: Availability
reservations.onAvailabilityAdded = proc(a: Availability) {.async.} =
added = a
let availability = createAvailability()
check added == availability
test "availabilities can be found":
let availability = createAvailability()
let found = await reservations.findAvailability(
availability.freeSize,
[marketplace] Availability improvements (#535) ## Problem When Availabilities are created, the amount of bytes in the Availability are reserved in the repo, so those bytes on disk cannot be written to otherwise. When a request for storage is received by a node, if a previously created Availability is matched, an attempt will be made to fill a slot in the request (more accurately, the request's slots are added to the SlotQueue, and eventually those slots will be processed). During download, bytes that were reserved for the Availability were released (as they were written to disk). To prevent more bytes from being released than were reserved in the Availability, the Availability was marked as used during the download, so that no other requests would match the Availability, and therefore no new downloads (and byte releases) would begin. The unfortunate downside to this, is that the number of Availabilities a node has determines the download concurrency capacity. If, for example, a node creates a single Availability that covers all available disk space the operator is willing to use, that single Availability would mean that only one download could occur at a time, meaning the node could potentially miss out on storage opportunities. ## Solution To alleviate the concurrency issue, each time a slot is processed, a Reservation is created, which takes size (aka reserved bytes) away from the Availability and stores them in the Reservation object. This can be done as many times as needed as long as there are enough bytes remaining in the Availability. Therefore, concurrent downloads are no longer limited by the number of Availabilities. Instead, they would more likely be limited to the SlotQueue's `maxWorkers`. From a database design perspective, an Availability has zero or more Reservations. Reservations are persisted in the RepoStore's metadata, along with Availabilities. The metadata store key path for Reservations is ` meta / sales / reservations / <availabilityId> / <reservationId>`, while Availabilities are stored one level up, eg `meta / sales / reservations / <availabilityId> `, allowing all Reservations for an Availability to be queried (this is not currently needed, but may be useful when work to restore Availability size is implemented, more on this later). ### Lifecycle When a reservation is created, its size is deducted from the Availability, and when a reservation is deleted, any remaining size (bytes not written to disk) is returned to the Availability. If the request finishes, is cancelled (expired), or an error occurs, the Reservation is deleted (and any undownloaded bytes returned to the Availability). In addition, when the Sales module starts, any Reservations that are not actively being used in a filled slot, are deleted. Having a Reservation persisted until after a storage request is completed, will allow for the originally set Availability size to be reclaimed once a request contract has been completed. This is a feature that is yet to be implemented, however the work in this PR is a step in the direction towards enabling this. ### Unknowns Reservation size is determined by the `StorageAsk.slotSize`. If during download, more bytes than `slotSize` are attempted to be downloaded than this, then the Reservation update will fail, and the state machine will move to a `SaleErrored` state, deleting the Reservation. This will likely prevent the slot from being filled. ### Notes Based on #514
2023-09-29 04:33:08 +00:00
availability.duration,
availability.minPrice,
availability.maxCollateral)
check found.isSome
check found.get == availability
test "non-matching availabilities are not found":
let availability = createAvailability()
let found = await reservations.findAvailability(
availability.freeSize + 1,
[marketplace] Availability improvements (#535) ## Problem When Availabilities are created, the amount of bytes in the Availability are reserved in the repo, so those bytes on disk cannot be written to otherwise. When a request for storage is received by a node, if a previously created Availability is matched, an attempt will be made to fill a slot in the request (more accurately, the request's slots are added to the SlotQueue, and eventually those slots will be processed). During download, bytes that were reserved for the Availability were released (as they were written to disk). To prevent more bytes from being released than were reserved in the Availability, the Availability was marked as used during the download, so that no other requests would match the Availability, and therefore no new downloads (and byte releases) would begin. The unfortunate downside to this, is that the number of Availabilities a node has determines the download concurrency capacity. If, for example, a node creates a single Availability that covers all available disk space the operator is willing to use, that single Availability would mean that only one download could occur at a time, meaning the node could potentially miss out on storage opportunities. ## Solution To alleviate the concurrency issue, each time a slot is processed, a Reservation is created, which takes size (aka reserved bytes) away from the Availability and stores them in the Reservation object. This can be done as many times as needed as long as there are enough bytes remaining in the Availability. Therefore, concurrent downloads are no longer limited by the number of Availabilities. Instead, they would more likely be limited to the SlotQueue's `maxWorkers`. From a database design perspective, an Availability has zero or more Reservations. Reservations are persisted in the RepoStore's metadata, along with Availabilities. The metadata store key path for Reservations is ` meta / sales / reservations / <availabilityId> / <reservationId>`, while Availabilities are stored one level up, eg `meta / sales / reservations / <availabilityId> `, allowing all Reservations for an Availability to be queried (this is not currently needed, but may be useful when work to restore Availability size is implemented, more on this later). ### Lifecycle When a reservation is created, its size is deducted from the Availability, and when a reservation is deleted, any remaining size (bytes not written to disk) is returned to the Availability. If the request finishes, is cancelled (expired), or an error occurs, the Reservation is deleted (and any undownloaded bytes returned to the Availability). In addition, when the Sales module starts, any Reservations that are not actively being used in a filled slot, are deleted. Having a Reservation persisted until after a storage request is completed, will allow for the originally set Availability size to be reclaimed once a request contract has been completed. This is a feature that is yet to be implemented, however the work in this PR is a step in the direction towards enabling this. ### Unknowns Reservation size is determined by the `StorageAsk.slotSize`. If during download, more bytes than `slotSize` are attempted to be downloaded than this, then the Reservation update will fail, and the state machine will move to a `SaleErrored` state, deleting the Reservation. This will likely prevent the slot from being filled. ### Notes Based on #514
2023-09-29 04:33:08 +00:00
availability.duration,
availability.minPrice,
availability.maxCollateral)
check found.isNone
[marketplace] Add Reservations Module (#340) * [marketplace] reservations module - add de/serialization for Availability - add markUsed/markUnused in persisted availability - add query for unused - add reserve/release - reservation module tests - split ContractInteractions into client contracts and host contracts - remove reservations start/stop as the repo start/stop is being managed by the node - remove dedicated reservations metadata store and use the metadata store from the repo instead - Split ContractInteractions into: - ClientInteractions (with purchasing) - HostInteractions (with sales and proving) - compilation fix for nim 1.2 [repostore] fix started flag, add tests [marketplace] persist slot index For loading the sales state from chain, the slot index was not previously persisted in the contract. Will retrieve the slot index from the contract when the sales state is loaded. * Revert repostore changes In favour of separate PR https://github.com/status-im/nim-codex/pull/374. * remove warnings * clean up * tests: stop repostore during teardown * change constructor type identifier Change Contracts constructor to accept Contracts type instead of ContractInteractions. * change constructor return type to Result instead of Option * fix and split interactions tests * clean up, fix tests * find availability by slot id * remove duplication in host/client interactions * add test for finding availability by slotId * log instead of raiseAssert when failed to mark availability as unused * move to SaleErrored state instead of raiseAssert * remove unneeded reverse It appears that order is not preserved in the repostore, so reversing does not have the intended effect here. * update open api spec for potential rest endpoint errors * move functions about available bytes to repostore * WIP: reserve and release availabilities as needed WIP: not tested yet Availabilities are marked as used when matched (just before downloading starts) so that future matching logic does not match an availability currently in use. As the download progresses, batches of blocks are written to disk, and the equivalent bytes are released from the reservation module. The size of the availability is reduced as well. During a reserve or release operation, availability updates occur after the repo is manipulated. If the availability update operation fails, the reserve or release is rolled back to maintain correct accounting of bytes. Finally, once download completes, or if an error occurs, the availability is marked as unused so future matching can occur. * delete availability when all bytes released * fix tests + cleanup * remove availability from SalesContext callbacks Availability is no longer used past the SaleDownloading state in the state machine. Cleanup of Availability (marking unused) is handled directly in the SaleDownloading state, and no longer in SaleErrored or SaleFinished. Likewise, Availabilities shouldn’t need to be handled on node restart. Additionally, Availability was being passed in SalesContext callbacks, and now that Availability is only used temporarily in the SaleDownloading state, Availability is contextually irrelevant to the callbacks, except in OnStore possibly, though it was not being consumed. * test clean up * - remove availability from callbacks and constructors from previous commit that needed to be removed (oopsie) - fix integration test that checks availabilities - there was a bug fixed that crashed the node due to a missing `return success` in onStore - the test was fixed by ensuring that availabilities are remaining on the node, and the size has been reduced - change Availability back to non-ref object and constructor back to init - add trace logging of all state transitions in state machine - add generally useful trace logging * fixes after rebase 1. Fix onProve callbacks 2. Use Slot type instead of tuple for retrieving active slot. 3. Bump codex-contracts-eth that exposes getActivceSlot call. * swap contracts branch to not support slot collateral Slot collateral changes in the contracts require further changes in the client code, so we’ll skip those changes for now and add in a separate commit. * modify Interactions and Deployment constructors - `HostInteractions` and `ClientInteractions` constructors were simplified to take a contract address and no overloads - `Interactions` prepared simplified so there are no overloads - `Deployment` constructor updated so that it takes an optional string parameter, instead `Option[string]` * Move `batchProc` declaration `batchProc` needs to be consumed by both `node` and `salescontext`, and they can’t reference each other as it creates a circular dependency. * [reservations] rename `available` to `hasAvailable` * [reservations] default error message to inner error msg * add SaleIngored state When a storage request is handled but the request does match availabilities, the sales agent machine is sent to the SaleIgnored state. In addition, the agent is constructed in a way that if the request is ignored, the sales agent is removed from the list of active agents being tracked in the sales module.
2023-04-04 07:05:16 +00:00
test "non-existant availability cannot be found":
[marketplace] Availability improvements (#535) ## Problem When Availabilities are created, the amount of bytes in the Availability are reserved in the repo, so those bytes on disk cannot be written to otherwise. When a request for storage is received by a node, if a previously created Availability is matched, an attempt will be made to fill a slot in the request (more accurately, the request's slots are added to the SlotQueue, and eventually those slots will be processed). During download, bytes that were reserved for the Availability were released (as they were written to disk). To prevent more bytes from being released than were reserved in the Availability, the Availability was marked as used during the download, so that no other requests would match the Availability, and therefore no new downloads (and byte releases) would begin. The unfortunate downside to this, is that the number of Availabilities a node has determines the download concurrency capacity. If, for example, a node creates a single Availability that covers all available disk space the operator is willing to use, that single Availability would mean that only one download could occur at a time, meaning the node could potentially miss out on storage opportunities. ## Solution To alleviate the concurrency issue, each time a slot is processed, a Reservation is created, which takes size (aka reserved bytes) away from the Availability and stores them in the Reservation object. This can be done as many times as needed as long as there are enough bytes remaining in the Availability. Therefore, concurrent downloads are no longer limited by the number of Availabilities. Instead, they would more likely be limited to the SlotQueue's `maxWorkers`. From a database design perspective, an Availability has zero or more Reservations. Reservations are persisted in the RepoStore's metadata, along with Availabilities. The metadata store key path for Reservations is ` meta / sales / reservations / <availabilityId> / <reservationId>`, while Availabilities are stored one level up, eg `meta / sales / reservations / <availabilityId> `, allowing all Reservations for an Availability to be queried (this is not currently needed, but may be useful when work to restore Availability size is implemented, more on this later). ### Lifecycle When a reservation is created, its size is deducted from the Availability, and when a reservation is deleted, any remaining size (bytes not written to disk) is returned to the Availability. If the request finishes, is cancelled (expired), or an error occurs, the Reservation is deleted (and any undownloaded bytes returned to the Availability). In addition, when the Sales module starts, any Reservations that are not actively being used in a filled slot, are deleted. Having a Reservation persisted until after a storage request is completed, will allow for the originally set Availability size to be reclaimed once a request contract has been completed. This is a feature that is yet to be implemented, however the work in this PR is a step in the direction towards enabling this. ### Unknowns Reservation size is determined by the `StorageAsk.slotSize`. If during download, more bytes than `slotSize` are attempted to be downloaded than this, then the Reservation update will fail, and the state machine will move to a `SaleErrored` state, deleting the Reservation. This will likely prevent the slot from being filled. ### Notes Based on #514
2023-09-29 04:33:08 +00:00
let availability = Availability.example
let found = (await reservations.findAvailability(
availability.freeSize,
[marketplace] Availability improvements (#535) ## Problem When Availabilities are created, the amount of bytes in the Availability are reserved in the repo, so those bytes on disk cannot be written to otherwise. When a request for storage is received by a node, if a previously created Availability is matched, an attempt will be made to fill a slot in the request (more accurately, the request's slots are added to the SlotQueue, and eventually those slots will be processed). During download, bytes that were reserved for the Availability were released (as they were written to disk). To prevent more bytes from being released than were reserved in the Availability, the Availability was marked as used during the download, so that no other requests would match the Availability, and therefore no new downloads (and byte releases) would begin. The unfortunate downside to this, is that the number of Availabilities a node has determines the download concurrency capacity. If, for example, a node creates a single Availability that covers all available disk space the operator is willing to use, that single Availability would mean that only one download could occur at a time, meaning the node could potentially miss out on storage opportunities. ## Solution To alleviate the concurrency issue, each time a slot is processed, a Reservation is created, which takes size (aka reserved bytes) away from the Availability and stores them in the Reservation object. This can be done as many times as needed as long as there are enough bytes remaining in the Availability. Therefore, concurrent downloads are no longer limited by the number of Availabilities. Instead, they would more likely be limited to the SlotQueue's `maxWorkers`. From a database design perspective, an Availability has zero or more Reservations. Reservations are persisted in the RepoStore's metadata, along with Availabilities. The metadata store key path for Reservations is ` meta / sales / reservations / <availabilityId> / <reservationId>`, while Availabilities are stored one level up, eg `meta / sales / reservations / <availabilityId> `, allowing all Reservations for an Availability to be queried (this is not currently needed, but may be useful when work to restore Availability size is implemented, more on this later). ### Lifecycle When a reservation is created, its size is deducted from the Availability, and when a reservation is deleted, any remaining size (bytes not written to disk) is returned to the Availability. If the request finishes, is cancelled (expired), or an error occurs, the Reservation is deleted (and any undownloaded bytes returned to the Availability). In addition, when the Sales module starts, any Reservations that are not actively being used in a filled slot, are deleted. Having a Reservation persisted until after a storage request is completed, will allow for the originally set Availability size to be reclaimed once a request contract has been completed. This is a feature that is yet to be implemented, however the work in this PR is a step in the direction towards enabling this. ### Unknowns Reservation size is determined by the `StorageAsk.slotSize`. If during download, more bytes than `slotSize` are attempted to be downloaded than this, then the Reservation update will fail, and the state machine will move to a `SaleErrored` state, deleting the Reservation. This will likely prevent the slot from being filled. ### Notes Based on #514
2023-09-29 04:33:08 +00:00
availability.duration,
availability.minPrice,
availability.maxCollateral
))
check found.isNone
[marketplace] Add Reservations Module (#340) * [marketplace] reservations module - add de/serialization for Availability - add markUsed/markUnused in persisted availability - add query for unused - add reserve/release - reservation module tests - split ContractInteractions into client contracts and host contracts - remove reservations start/stop as the repo start/stop is being managed by the node - remove dedicated reservations metadata store and use the metadata store from the repo instead - Split ContractInteractions into: - ClientInteractions (with purchasing) - HostInteractions (with sales and proving) - compilation fix for nim 1.2 [repostore] fix started flag, add tests [marketplace] persist slot index For loading the sales state from chain, the slot index was not previously persisted in the contract. Will retrieve the slot index from the contract when the sales state is loaded. * Revert repostore changes In favour of separate PR https://github.com/status-im/nim-codex/pull/374. * remove warnings * clean up * tests: stop repostore during teardown * change constructor type identifier Change Contracts constructor to accept Contracts type instead of ContractInteractions. * change constructor return type to Result instead of Option * fix and split interactions tests * clean up, fix tests * find availability by slot id * remove duplication in host/client interactions * add test for finding availability by slotId * log instead of raiseAssert when failed to mark availability as unused * move to SaleErrored state instead of raiseAssert * remove unneeded reverse It appears that order is not preserved in the repostore, so reversing does not have the intended effect here. * update open api spec for potential rest endpoint errors * move functions about available bytes to repostore * WIP: reserve and release availabilities as needed WIP: not tested yet Availabilities are marked as used when matched (just before downloading starts) so that future matching logic does not match an availability currently in use. As the download progresses, batches of blocks are written to disk, and the equivalent bytes are released from the reservation module. The size of the availability is reduced as well. During a reserve or release operation, availability updates occur after the repo is manipulated. If the availability update operation fails, the reserve or release is rolled back to maintain correct accounting of bytes. Finally, once download completes, or if an error occurs, the availability is marked as unused so future matching can occur. * delete availability when all bytes released * fix tests + cleanup * remove availability from SalesContext callbacks Availability is no longer used past the SaleDownloading state in the state machine. Cleanup of Availability (marking unused) is handled directly in the SaleDownloading state, and no longer in SaleErrored or SaleFinished. Likewise, Availabilities shouldn’t need to be handled on node restart. Additionally, Availability was being passed in SalesContext callbacks, and now that Availability is only used temporarily in the SaleDownloading state, Availability is contextually irrelevant to the callbacks, except in OnStore possibly, though it was not being consumed. * test clean up * - remove availability from callbacks and constructors from previous commit that needed to be removed (oopsie) - fix integration test that checks availabilities - there was a bug fixed that crashed the node due to a missing `return success` in onStore - the test was fixed by ensuring that availabilities are remaining on the node, and the size has been reduced - change Availability back to non-ref object and constructor back to init - add trace logging of all state transitions in state machine - add generally useful trace logging * fixes after rebase 1. Fix onProve callbacks 2. Use Slot type instead of tuple for retrieving active slot. 3. Bump codex-contracts-eth that exposes getActivceSlot call. * swap contracts branch to not support slot collateral Slot collateral changes in the contracts require further changes in the client code, so we’ll skip those changes for now and add in a separate commit. * modify Interactions and Deployment constructors - `HostInteractions` and `ClientInteractions` constructors were simplified to take a contract address and no overloads - `Interactions` prepared simplified so there are no overloads - `Deployment` constructor updated so that it takes an optional string parameter, instead `Option[string]` * Move `batchProc` declaration `batchProc` needs to be consumed by both `node` and `salescontext`, and they can’t reference each other as it creates a circular dependency. * [reservations] rename `available` to `hasAvailable` * [reservations] default error message to inner error msg * add SaleIngored state When a storage request is handled but the request does match availabilities, the sales agent machine is sent to the SaleIgnored state. In addition, the agent is constructed in a way that if the request is ignored, the sales agent is removed from the list of active agents being tracked in the sales module.
2023-04-04 07:05:16 +00:00
test "non-existant availability cannot be retrieved":
[marketplace] Availability improvements (#535) ## Problem When Availabilities are created, the amount of bytes in the Availability are reserved in the repo, so those bytes on disk cannot be written to otherwise. When a request for storage is received by a node, if a previously created Availability is matched, an attempt will be made to fill a slot in the request (more accurately, the request's slots are added to the SlotQueue, and eventually those slots will be processed). During download, bytes that were reserved for the Availability were released (as they were written to disk). To prevent more bytes from being released than were reserved in the Availability, the Availability was marked as used during the download, so that no other requests would match the Availability, and therefore no new downloads (and byte releases) would begin. The unfortunate downside to this, is that the number of Availabilities a node has determines the download concurrency capacity. If, for example, a node creates a single Availability that covers all available disk space the operator is willing to use, that single Availability would mean that only one download could occur at a time, meaning the node could potentially miss out on storage opportunities. ## Solution To alleviate the concurrency issue, each time a slot is processed, a Reservation is created, which takes size (aka reserved bytes) away from the Availability and stores them in the Reservation object. This can be done as many times as needed as long as there are enough bytes remaining in the Availability. Therefore, concurrent downloads are no longer limited by the number of Availabilities. Instead, they would more likely be limited to the SlotQueue's `maxWorkers`. From a database design perspective, an Availability has zero or more Reservations. Reservations are persisted in the RepoStore's metadata, along with Availabilities. The metadata store key path for Reservations is ` meta / sales / reservations / <availabilityId> / <reservationId>`, while Availabilities are stored one level up, eg `meta / sales / reservations / <availabilityId> `, allowing all Reservations for an Availability to be queried (this is not currently needed, but may be useful when work to restore Availability size is implemented, more on this later). ### Lifecycle When a reservation is created, its size is deducted from the Availability, and when a reservation is deleted, any remaining size (bytes not written to disk) is returned to the Availability. If the request finishes, is cancelled (expired), or an error occurs, the Reservation is deleted (and any undownloaded bytes returned to the Availability). In addition, when the Sales module starts, any Reservations that are not actively being used in a filled slot, are deleted. Having a Reservation persisted until after a storage request is completed, will allow for the originally set Availability size to be reclaimed once a request contract has been completed. This is a feature that is yet to be implemented, however the work in this PR is a step in the direction towards enabling this. ### Unknowns Reservation size is determined by the `StorageAsk.slotSize`. If during download, more bytes than `slotSize` are attempted to be downloaded than this, then the Reservation update will fail, and the state machine will move to a `SaleErrored` state, deleting the Reservation. This will likely prevent the slot from being filled. ### Notes Based on #514
2023-09-29 04:33:08 +00:00
let key = AvailabilityId.example.key.get
let got = await reservations.get(key, Availability)
check got.error of NotExistsError
[marketplace] Add Reservations Module (#340) * [marketplace] reservations module - add de/serialization for Availability - add markUsed/markUnused in persisted availability - add query for unused - add reserve/release - reservation module tests - split ContractInteractions into client contracts and host contracts - remove reservations start/stop as the repo start/stop is being managed by the node - remove dedicated reservations metadata store and use the metadata store from the repo instead - Split ContractInteractions into: - ClientInteractions (with purchasing) - HostInteractions (with sales and proving) - compilation fix for nim 1.2 [repostore] fix started flag, add tests [marketplace] persist slot index For loading the sales state from chain, the slot index was not previously persisted in the contract. Will retrieve the slot index from the contract when the sales state is loaded. * Revert repostore changes In favour of separate PR https://github.com/status-im/nim-codex/pull/374. * remove warnings * clean up * tests: stop repostore during teardown * change constructor type identifier Change Contracts constructor to accept Contracts type instead of ContractInteractions. * change constructor return type to Result instead of Option * fix and split interactions tests * clean up, fix tests * find availability by slot id * remove duplication in host/client interactions * add test for finding availability by slotId * log instead of raiseAssert when failed to mark availability as unused * move to SaleErrored state instead of raiseAssert * remove unneeded reverse It appears that order is not preserved in the repostore, so reversing does not have the intended effect here. * update open api spec for potential rest endpoint errors * move functions about available bytes to repostore * WIP: reserve and release availabilities as needed WIP: not tested yet Availabilities are marked as used when matched (just before downloading starts) so that future matching logic does not match an availability currently in use. As the download progresses, batches of blocks are written to disk, and the equivalent bytes are released from the reservation module. The size of the availability is reduced as well. During a reserve or release operation, availability updates occur after the repo is manipulated. If the availability update operation fails, the reserve or release is rolled back to maintain correct accounting of bytes. Finally, once download completes, or if an error occurs, the availability is marked as unused so future matching can occur. * delete availability when all bytes released * fix tests + cleanup * remove availability from SalesContext callbacks Availability is no longer used past the SaleDownloading state in the state machine. Cleanup of Availability (marking unused) is handled directly in the SaleDownloading state, and no longer in SaleErrored or SaleFinished. Likewise, Availabilities shouldn’t need to be handled on node restart. Additionally, Availability was being passed in SalesContext callbacks, and now that Availability is only used temporarily in the SaleDownloading state, Availability is contextually irrelevant to the callbacks, except in OnStore possibly, though it was not being consumed. * test clean up * - remove availability from callbacks and constructors from previous commit that needed to be removed (oopsie) - fix integration test that checks availabilities - there was a bug fixed that crashed the node due to a missing `return success` in onStore - the test was fixed by ensuring that availabilities are remaining on the node, and the size has been reduced - change Availability back to non-ref object and constructor back to init - add trace logging of all state transitions in state machine - add generally useful trace logging * fixes after rebase 1. Fix onProve callbacks 2. Use Slot type instead of tuple for retrieving active slot. 3. Bump codex-contracts-eth that exposes getActivceSlot call. * swap contracts branch to not support slot collateral Slot collateral changes in the contracts require further changes in the client code, so we’ll skip those changes for now and add in a separate commit. * modify Interactions and Deployment constructors - `HostInteractions` and `ClientInteractions` constructors were simplified to take a contract address and no overloads - `Interactions` prepared simplified so there are no overloads - `Deployment` constructor updated so that it takes an optional string parameter, instead `Option[string]` * Move `batchProc` declaration `batchProc` needs to be consumed by both `node` and `salescontext`, and they can’t reference each other as it creates a circular dependency. * [reservations] rename `available` to `hasAvailable` * [reservations] default error message to inner error msg * add SaleIngored state When a storage request is handled but the request does match availabilities, the sales agent machine is sent to the SaleIgnored state. In addition, the agent is constructed in a way that if the request is ignored, the sales agent is removed from the list of active agents being tracked in the sales module.
2023-04-04 07:05:16 +00:00
test "can get available bytes in repo":
check reservations.available == DefaultQuotaBytes
test "reports quota available to be reserved":
[marketplace] Availability improvements (#535) ## Problem When Availabilities are created, the amount of bytes in the Availability are reserved in the repo, so those bytes on disk cannot be written to otherwise. When a request for storage is received by a node, if a previously created Availability is matched, an attempt will be made to fill a slot in the request (more accurately, the request's slots are added to the SlotQueue, and eventually those slots will be processed). During download, bytes that were reserved for the Availability were released (as they were written to disk). To prevent more bytes from being released than were reserved in the Availability, the Availability was marked as used during the download, so that no other requests would match the Availability, and therefore no new downloads (and byte releases) would begin. The unfortunate downside to this, is that the number of Availabilities a node has determines the download concurrency capacity. If, for example, a node creates a single Availability that covers all available disk space the operator is willing to use, that single Availability would mean that only one download could occur at a time, meaning the node could potentially miss out on storage opportunities. ## Solution To alleviate the concurrency issue, each time a slot is processed, a Reservation is created, which takes size (aka reserved bytes) away from the Availability and stores them in the Reservation object. This can be done as many times as needed as long as there are enough bytes remaining in the Availability. Therefore, concurrent downloads are no longer limited by the number of Availabilities. Instead, they would more likely be limited to the SlotQueue's `maxWorkers`. From a database design perspective, an Availability has zero or more Reservations. Reservations are persisted in the RepoStore's metadata, along with Availabilities. The metadata store key path for Reservations is ` meta / sales / reservations / <availabilityId> / <reservationId>`, while Availabilities are stored one level up, eg `meta / sales / reservations / <availabilityId> `, allowing all Reservations for an Availability to be queried (this is not currently needed, but may be useful when work to restore Availability size is implemented, more on this later). ### Lifecycle When a reservation is created, its size is deducted from the Availability, and when a reservation is deleted, any remaining size (bytes not written to disk) is returned to the Availability. If the request finishes, is cancelled (expired), or an error occurs, the Reservation is deleted (and any undownloaded bytes returned to the Availability). In addition, when the Sales module starts, any Reservations that are not actively being used in a filled slot, are deleted. Having a Reservation persisted until after a storage request is completed, will allow for the originally set Availability size to be reclaimed once a request contract has been completed. This is a feature that is yet to be implemented, however the work in this PR is a step in the direction towards enabling this. ### Unknowns Reservation size is determined by the `StorageAsk.slotSize`. If during download, more bytes than `slotSize` are attempted to be downloaded than this, then the Reservation update will fail, and the state machine will move to a `SaleErrored` state, deleting the Reservation. This will likely prevent the slot from being filled. ### Notes Based on #514
2023-09-29 04:33:08 +00:00
check reservations.hasAvailable(DefaultQuotaBytes - 1)
[marketplace] Add Reservations Module (#340) * [marketplace] reservations module - add de/serialization for Availability - add markUsed/markUnused in persisted availability - add query for unused - add reserve/release - reservation module tests - split ContractInteractions into client contracts and host contracts - remove reservations start/stop as the repo start/stop is being managed by the node - remove dedicated reservations metadata store and use the metadata store from the repo instead - Split ContractInteractions into: - ClientInteractions (with purchasing) - HostInteractions (with sales and proving) - compilation fix for nim 1.2 [repostore] fix started flag, add tests [marketplace] persist slot index For loading the sales state from chain, the slot index was not previously persisted in the contract. Will retrieve the slot index from the contract when the sales state is loaded. * Revert repostore changes In favour of separate PR https://github.com/status-im/nim-codex/pull/374. * remove warnings * clean up * tests: stop repostore during teardown * change constructor type identifier Change Contracts constructor to accept Contracts type instead of ContractInteractions. * change constructor return type to Result instead of Option * fix and split interactions tests * clean up, fix tests * find availability by slot id * remove duplication in host/client interactions * add test for finding availability by slotId * log instead of raiseAssert when failed to mark availability as unused * move to SaleErrored state instead of raiseAssert * remove unneeded reverse It appears that order is not preserved in the repostore, so reversing does not have the intended effect here. * update open api spec for potential rest endpoint errors * move functions about available bytes to repostore * WIP: reserve and release availabilities as needed WIP: not tested yet Availabilities are marked as used when matched (just before downloading starts) so that future matching logic does not match an availability currently in use. As the download progresses, batches of blocks are written to disk, and the equivalent bytes are released from the reservation module. The size of the availability is reduced as well. During a reserve or release operation, availability updates occur after the repo is manipulated. If the availability update operation fails, the reserve or release is rolled back to maintain correct accounting of bytes. Finally, once download completes, or if an error occurs, the availability is marked as unused so future matching can occur. * delete availability when all bytes released * fix tests + cleanup * remove availability from SalesContext callbacks Availability is no longer used past the SaleDownloading state in the state machine. Cleanup of Availability (marking unused) is handled directly in the SaleDownloading state, and no longer in SaleErrored or SaleFinished. Likewise, Availabilities shouldn’t need to be handled on node restart. Additionally, Availability was being passed in SalesContext callbacks, and now that Availability is only used temporarily in the SaleDownloading state, Availability is contextually irrelevant to the callbacks, except in OnStore possibly, though it was not being consumed. * test clean up * - remove availability from callbacks and constructors from previous commit that needed to be removed (oopsie) - fix integration test that checks availabilities - there was a bug fixed that crashed the node due to a missing `return success` in onStore - the test was fixed by ensuring that availabilities are remaining on the node, and the size has been reduced - change Availability back to non-ref object and constructor back to init - add trace logging of all state transitions in state machine - add generally useful trace logging * fixes after rebase 1. Fix onProve callbacks 2. Use Slot type instead of tuple for retrieving active slot. 3. Bump codex-contracts-eth that exposes getActivceSlot call. * swap contracts branch to not support slot collateral Slot collateral changes in the contracts require further changes in the client code, so we’ll skip those changes for now and add in a separate commit. * modify Interactions and Deployment constructors - `HostInteractions` and `ClientInteractions` constructors were simplified to take a contract address and no overloads - `Interactions` prepared simplified so there are no overloads - `Deployment` constructor updated so that it takes an optional string parameter, instead `Option[string]` * Move `batchProc` declaration `batchProc` needs to be consumed by both `node` and `salescontext`, and they can’t reference each other as it creates a circular dependency. * [reservations] rename `available` to `hasAvailable` * [reservations] default error message to inner error msg * add SaleIngored state When a storage request is handled but the request does match availabilities, the sales agent machine is sent to the SaleIgnored state. In addition, the agent is constructed in a way that if the request is ignored, the sales agent is removed from the list of active agents being tracked in the sales module.
2023-04-04 07:05:16 +00:00
test "reports quota not available to be reserved":
[marketplace] Availability improvements (#535) ## Problem When Availabilities are created, the amount of bytes in the Availability are reserved in the repo, so those bytes on disk cannot be written to otherwise. When a request for storage is received by a node, if a previously created Availability is matched, an attempt will be made to fill a slot in the request (more accurately, the request's slots are added to the SlotQueue, and eventually those slots will be processed). During download, bytes that were reserved for the Availability were released (as they were written to disk). To prevent more bytes from being released than were reserved in the Availability, the Availability was marked as used during the download, so that no other requests would match the Availability, and therefore no new downloads (and byte releases) would begin. The unfortunate downside to this, is that the number of Availabilities a node has determines the download concurrency capacity. If, for example, a node creates a single Availability that covers all available disk space the operator is willing to use, that single Availability would mean that only one download could occur at a time, meaning the node could potentially miss out on storage opportunities. ## Solution To alleviate the concurrency issue, each time a slot is processed, a Reservation is created, which takes size (aka reserved bytes) away from the Availability and stores them in the Reservation object. This can be done as many times as needed as long as there are enough bytes remaining in the Availability. Therefore, concurrent downloads are no longer limited by the number of Availabilities. Instead, they would more likely be limited to the SlotQueue's `maxWorkers`. From a database design perspective, an Availability has zero or more Reservations. Reservations are persisted in the RepoStore's metadata, along with Availabilities. The metadata store key path for Reservations is ` meta / sales / reservations / <availabilityId> / <reservationId>`, while Availabilities are stored one level up, eg `meta / sales / reservations / <availabilityId> `, allowing all Reservations for an Availability to be queried (this is not currently needed, but may be useful when work to restore Availability size is implemented, more on this later). ### Lifecycle When a reservation is created, its size is deducted from the Availability, and when a reservation is deleted, any remaining size (bytes not written to disk) is returned to the Availability. If the request finishes, is cancelled (expired), or an error occurs, the Reservation is deleted (and any undownloaded bytes returned to the Availability). In addition, when the Sales module starts, any Reservations that are not actively being used in a filled slot, are deleted. Having a Reservation persisted until after a storage request is completed, will allow for the originally set Availability size to be reclaimed once a request contract has been completed. This is a feature that is yet to be implemented, however the work in this PR is a step in the direction towards enabling this. ### Unknowns Reservation size is determined by the `StorageAsk.slotSize`. If during download, more bytes than `slotSize` are attempted to be downloaded than this, then the Reservation update will fail, and the state machine will move to a `SaleErrored` state, deleting the Reservation. This will likely prevent the slot from being filled. ### Notes Based on #514
2023-09-29 04:33:08 +00:00
check not reservations.hasAvailable(DefaultQuotaBytes + 1)
test "fails to create availability with size that is larger than available quota":
let created = await reservations.createAvailability(
(DefaultQuotaBytes + 1).u256,
UInt256.example,
UInt256.example,
UInt256.example
)
check created.isErr
check created.error of ReserveFailedError
check created.error.parent of QuotaNotEnoughError