* Use http subscriptions instead of websocket for tests
To work around this issue when subscriptions are
inactive for more than 5 minutes:
https://github.com/NomicFoundation/hardhat/issues/2053
Use 100 millisecond polling; default polling interval
of 4 seconds is too close to the 5 second timeout for
`check eventually`.
* use .confirm(1) instead of confirm(0)
confirm(0) doesn't wait at all, confirm(1) waits
for the transaction to be mined
* speed up partial payout integration test
* update nim-ethers to version 0.10.0
includes fixes for http polling and .confirm()
* fix timing of marketplace tests
allow for a bit more time to withdraw funds
* use .confirm(1) in marketplace tests
to ensure that the transaction has been processed
before continuing with the test
* fix timing issue in validation unit test
* fix proof integration test
there were two logic errors in this test:
- a slot is freed anyway at the end of the contract
- when starting the request takes a long time, the
first slot can already be freed because there were
too many missing proofs
* fix intermittent error in contract tests
currentTime() doesn't always correctly reflect
the time of the next transaction
* reduce number of slots in integration test
otherwise the windows runner in the CI won't
be able to start the request before it expires
* fix timing in purchasing test
allow for a bit more time for a request to
be submitted
* fix timing of request submission in test
windows ci is so slow, it can take up to 40 seconds
just to submit a storage request to hardhat
* increase proof period to 90 seconds
* adjust timing of integration tests
reason: with the increased period length of 90 seconds, it
can take longer to wait for a stable challenge at the
beginning of a period.
* increase CI timeout to 2 hours
* Fix slow builds on windows
apparently it takes windows 2-3 seconds to
resolve "localhost" to 127.0.0.1 for every
json-rpc connection that we make 🤦
* chore: bump dependencies, including nim-ethers with chronos v4 support
Bumps the following dependencies:
- nim-ethers to commit 507ac6a4cc71cec9be7693fa393db4a49b52baf9 which contains a pinned nim-eth version. This is to be replaced by a versioned library, so it will be pinned to a particular version. There is a crucial fix in this version of ethers that fixes nonce management which is causing issues in the Codex testnet.
- nim-json-rpc to v0.4.4
- nim-json-serialization to v0.2.8
- nim-serde to v1.2.2
- nim-serialization to v0.2.4
Currently, one of the integration tests is failing.
* fix integration test
- When a state's run was cancelled, it was being caught as an error due to catching all CatchableErrors. This caused a state transition to SaleErrored, however cancellation of run was not actually an error. Handling this correctly fixed the issue.
- Stopping of the clock was moved to after `HostInteractions` (sales) which avoided an assertion around getting time when the clock was not started.
* bump ethers to include nonce fix and filter not found fix
* bump ethers: fixes missing symbol not exported in ethers
* Fix cirdl test imports/exports
* Debugging in ci
* Handle CancelledErrors for state.run in one place only
* Rename `config` to `configuration`
There was a symbol clash preventing compilation and it was easiest to rename `config` to `configuration` in the contracts. Not even remotely ideal, but it was the only way.
* bump ethers to latest
Prevents an issue were `JsonNode.items` symbol could not be found
* More changes to support `config` > `configuration`
* cleanup
* testing to see if this fixes failure in ci
* bumps contracts
- ensures slot is free before allowing reservation
- renames config to configuration to avoid symbol clash
* Add metadata to the manifest
* Remove useless import
* Fix the openapi documentation
* Use optional fields instead of default values
* Remove testRestApi target
* Return failure when the protobuf cannot get the field
* Set download headers and fix cors headers when an error is returned
* Add tests to verify the download headers
* Try to adjust the content length header
* Fix convertion to string
* Remove the content length header
* Remove testRestApi target
* Removing debug messages
* Avoid cancelling states when slot is filled
* improve logging
Improves logging for situations where a Sale should be ignored instead of being considered an error, including when reservation is not allowed and when a slot was filled by another host.
* remove onSlotFilled unit tests from states
* Adds API for fetching manifest only and downloading dataset without stream
* Updates openapi.yaml
* Adds tests for downloading manifest-only and without stream.
* review comments by Giuliano
* updates test clients
* convert EthersError to MarketError
* change `canReserveSlot` and `reserveSlot` parameters
Parameters for `canReserveSlot` and `reserveSlot` were changed from `SlotId` to `RequestId` and `UInt256 slotIndex`.
* Add SaleSlotReserving
Adds a new state, SaleSlotReserving, that attempts to reserve a slot before downloading.
If the slot cannot be reserved, the state moves to SaleIgnored.
On error, the state moves to SaleErrored.
SaleIgnored is also updated to pass in `reprocessSlot` and `returnBytes`, controlling the behaviour in the Sales module after the slot is ignored. This is because previously it was assumed that SaleIgnored was only reached when there was no Availability. This is no longer the case, since SaleIgnored can now be reached when a slot cannot be reserved.
* Update SalePreparing
Specify `reprocessSlot` and `returnBytes` when moving to `SaleIgnored` from `SalePreparing`.
Update tests to include test for a raised CatchableError.
* Fix unit test
* Modify `canReserveSlot` and `reverseSlot` params after rebase
* Update MockMarket with new `canReserveSlot` and `reserveSlot` params
* fix after rebase
also bump codex-contracts-eth to master
* feat(slot-reservations): Support reserving slots
Closes#898.
Wire up reserveSlot and canReserveSlot contract calls, but don't call them
* Remove return value from `reserveSlot`
* convert EthersError to MarketError
* Move convertEthersError to reserveSlot
* bump codex-contracts-eth after rebase
* change `canReserveSlot` and `reserveSlot` parameters
Parameters for `canReserveSlot` and `reserveSlot` were changed from `SlotId` to `RequestId` and `UInt256 slotIndex`.
* bump codex-contracts-eth after rebase
* bump codex-contracts-eth to master after codex-contracts-eth/pull/177 merged
* Adds validatorPartitionSize and validatorPartitionIndex config options
* adds partitioning options to the validation type
* adds partitioning logic to the validator
* ignores partitionIndex when partitionSize is either 0 or 1
* clips the partition index to <<partitionIndex mod partitionSize>>
* handles negative values for the validation partition index
* updates long description of the new validator cli options
* makes default partitionSize to be 0 for better backward compatibility
* Improving formatting on validator CLI
* reactors validation params into a separate type and simplifies validation of validation params
* removes suspected duplication
* fixes typo in validator CLI help
* updates README
* Applies review comments - using optionals and range types to handle validation params
* Adds initializer to the configFactory for validatorMaxSlots
* [Review] update validator CLI description and README
* [Review]: renaming validationParams to validationConfig (config)
* [Review]: move validationconfig.nim to a higher level (next to validation.nim)
* changes backing type of MaxSlots to be int and makes sure slots are validated without limit when maxSlots is set to 0
* adds more end-to-end test for the validator and the groups
* fixes typo in README and conf.nim
* makes `maxSlotsConstraintRespected` and `shouldValidateSlot` private + updates the tests
* fixes public address of the signer account in the marketplace tutorial
* applies review comments - removes two tests
* All sort of tweaks
* docs: availability's minPrice doc
* Revert changes to the two node test example
* Change default EC params in REST API
Change default EC params in REST API to 3 nodes and 1 tolerance.
Adjust integration tests to honour these settings.
---------
Co-authored-by: Eric <5089238+emizzle@users.noreply.github.com>
* Introduces a start method to prover
* Moves backend creation into start method
* sets up three paths for backend initialization
* Extracts backend initialization to backend-factory
* Implements loading backend from cli files or previously downloaded local files
* Wires up downloading and unzipping
* functional implementation
* Fixes testprover.nim
* Sets up tests for backendfactory
* includes libzip-dev
* pulls in updated contracts
* removes integration cli tests for r1cs, wasm, and zkey file arguments.
* Fixes issue where inner-scope values are lost before returning
* sets local proof verification for dist-test images
* Adds two traces and bumps nim-ethers
* Adds separate path for circuit files
* Create circuit dir if not exists
* fix: make sure requestStorage is mined
* fix: correct place to plug confirm
* test: fixing contracts tests
* Restores gitmodules
* restores nim-datastore reference
* Sets up downloader exe
* sets up tool skeleton
* implements getting of circuit hash
* Implements downloader tool
* sets up test skeleton
* Implements test for cirdl
* includes testTools in testAll
* Cleanup building.md
* cleans up previous downloader implementation
* cleans up testbackendfactory
* moves start of prover into node.nim
* Fills in arguments in example command
* Initializes backend in prover constructor
* Restores tests
* Restores tests for cli instructions
* Review comments by Dmitriy, part 1
* Quotes path in download instruction.
* replaces curl with chronos http session
* Moves cirdl build output to 'build' folder.
* Fixes chronicles log output
* Add cirdl support to the codex Dockerfile
Signed-off-by: Slava <20563034+veaceslavdoina@users.noreply.github.com>
* Add cirdl support to the docker entrypoint
Signed-off-by: Slava <20563034+veaceslavdoina@users.noreply.github.com>
* Add cirdl support to the release workflow
Signed-off-by: Slava <20563034+veaceslavdoina@users.noreply.github.com>
* Disable verify_circuit flag for releases
Signed-off-by: Slava <20563034+veaceslavdoina@users.noreply.github.com>
* Removes backendFactory placeholder type
* wip
* Replaces zip library with status-im/zippy library (which supports zip and tar)
* Updates cirdl to not change circuitdir folder
* Switches from zip to tar.gz
* Review comments by Dmitriy
* updates codex-contracts-eth
* Adds testTools to CI
* Adds check for access to config.circuitdir
* Update fixture circuit zkey
* Update matrix to run tools tests on Windows
* Adds 'deps' dependency for cirdl
* Adjust docker-entrypoint.sh to use CODEX_CIRCUIT_DIR env var
* Review comments by Giuliano
---------
Signed-off-by: Slava <20563034+veaceslavdoina@users.noreply.github.com>
Co-authored-by: Adam Uhlíř <adam@uhlir.dev>
Co-authored-by: Veaceslav Doina <20563034+veaceslavdoina@users.noreply.github.com>
* feat: add `--payout-address`
Allows SPs to be paid out to a separate address, keeping their profits secure.
Supports https://github.com/codex-storage/codex-contracts-eth/pull/144 in the nim-codex client.
* Remove optional payoutAddress
Change --payout-address so that it is no longer optional. There is no longer an overload in `Marketplace.sol` for `fillSlot` accepting no `payoutAddress`.
* Update integration tests to include --payout-address
* move payoutAddress from fillSlot to freeSlot
* Update integration tests to use required payoutAddress
- to make payoutAddress required, the integration tests needed to avoid building the cli params until just before starting the node, otherwise if cli params were added ad-hoc, there would be an error after a non-required parameter was added before a required parameter.
* support client payout address
- withdrawFunds requires a withdrawAddress parameter, directs payouts for withdrawing of client funds (for a cancelled request) to go to that address.
* fix integration test
adds --payout-address to validators
* refactor: support withdrawFunds and freeSlot optional parameters
- withdrawFunds has an optional parameter for withdrawRecipient
- freeSlot has optional parameters for rewardRecipient and collateralRecipient
- change --payout-address to --reward-recipient to match contract signature naming
* Revert "Update integration tests to include --payout-address"
This reverts commit 8f9535cf35.
There are some valid improvements to the integration tests, but they can be handled in a separate PR.
* small fix
* bump contracts to fix marketplace spec
* bump codex-contracts-eth, now rebased on master
* bump codex-contracts-eth
now that feat/reward-address has been merged to master
* clean up, comments
* refactor(marketplace): move marketplace events to the Market abstraction
Move marketplace contract events to the Market abstraction so the types can be shared across all modules that call the Market abstraction.
* Remove unneeded conversion
* Switch to generic implementation of event querying
* change parent type to MarketplaceEvent
* Add CORS headers when the REST API is returning an error
* Use the allowedOrigin instead of the wilcard when setting the origin
Signed-off-by: Arnaud <arnaud@status.im>
---------
Signed-off-by: Arnaud <arnaud@status.im>
* add changes to use chronos v4 in compat mode
* switch chronos to compat fix branch
* use nimbus-build-system with configurable Nim repo
* add missing imports
* add missing await
* bump compat
* pin nim version in Makefile
* add await instead of asyncSpawn to advertisement queue loop
* bump DHT to v0.5.0
* allow error state of `onBatch` to propagate upwards in test code
* pin Nim compiler commit to avoid fetching stale branch
* make CI build against branch head instead of merge
* fix handling of return values in testslotqueue
* add logs and test
* add Merkle proof checks
* factor out Circom input normalization, fix proof input serialization
* add test and update existing ones
* update circuit assets
* add back trace message
* switch contracts to fix branch
* update codex-contracts-eth to latest
* do not expose prove with prenormalized inputs
* add prover bandaid
* Improve error message text
Co-authored-by: Eric <5089238+emizzle@users.noreply.github.com>
Signed-off-by: Giuliano Mega <giuliano.mega@gmail.com>
---------
Signed-off-by: Giuliano Mega <giuliano.mega@gmail.com>
Co-authored-by: Eric <5089238+emizzle@users.noreply.github.com>
* Rest API: add erasure coding constraints when requesting storage
* clean up
* Make error message for "dataset too small" more informative.
* fix API integration test
---------
Co-authored-by: gmega <giuliano.mega@gmail.com>
* Fix verifiable manifest constructor
* Add integration test for verifiable manifest download
Add integration test for testing download of verifiable dataset after creating request for storage
* add missing import
* add testecbug to integration suite
* Remove hardhat instance from integration test
* change description, drop echo
---------
Co-authored-by: Eric <5089238+emizzle@users.noreply.github.com>
Co-authored-by: gmega <giuliano.mega@gmail.com>
* fix verifiable manifest initialization
* fix linearstrategy, use verifiableStrategy to select blocks for slots
* check for both strategies in attribute inheritance test
* Rework AsyncIter
* Add tests for finishing iter on error
* Improved error handling for and additional tests
* Use new style of constructors
* Handle future cancellation
* Docs for constructors
* pulls in datastore-leveldb update
* bump
* Applies LevelDb as metadata store. Adds option for repostore.
* Sets submodule to main branch
* I can do syntax, me
* Removes wildcard from metadata query key
* Applies leveldb instead of sqlite-in-memory for tests
* Restores query key wildcard.
* Pins nim-datastore to latest master
* bumps leveldb to 0.1.4
---------
Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
* add seen flag
* Add MockSlotQueueItem and better prioritisation tests
* Update seen priority, and include in SlotQueueItem.init
* Re-add processed slots to queue
Re-add processed slots to queue if the sale was ignored or errored
* add pausing of queue
- when processing slots in queue, pause queue if item was marked seen
- if availability size is increased, trigger onAvailabilityAdded callback
- in sales, on availability added, clear 'seen' flags, then unpause the queue
- when items pushed to the queue, unpause the queue
* remove unused NoMatchingAvailabilityError from slotqueue
The slot queue should also have nothing to do with availabilities
* when all availabilities are empty, pause the queue
An empty availability is defined as size < DefaultBlockSize as this means even the smallest possible request could not be served. However, this is up for discussion.
* remove availability from onAvailabilitiesEmptied callback
* refactor onAvailabilityAdded and onAvailabilitiesEmptied
onAvailabilityAdded and onAvailabilitiesEmptied are now only called from reservations.update (and eventually reservations.delete once implemented).
- Add empty routine for Availability and Reservation
- Add allEmpty routine for Availability and Reservation, which returns true when all all Availability or Reservation objects in the datastore are empty.
* SlotQueue test support updates
* Sales module test support updates
* Reservations module tests for queue pausing
* Sales module tests for queue pausing
Includes tests for sales states cancelled, errored, ignored to ensure onCleanUp is called with correct parameters
* SlotQueue module tests for queue pausing
* fix existing sales test
* PR feedback
- indent `self.unpause`
- update comment for `clearSeenFlags`
* reprocessSlot in SaleErrored only when coming from downloading
* remove pausing of queue when availabilities are "emptied"
Queue pausing when all availiabilies are "emptied" is not necessary, given that the node would not be able to service slots once all its availabilities' freeSize are too small for the slots in the queue, and would then be paused anyway.
Add test that asserts the queue is paused once the freeSpace of availabilities drops too low to fill slots in the queue.
* Update clearing of seen flags
The asyncheapqueue update overload would need to check index bounds and ultimately a different solution was found using the mitems iterator.
* fix test
request.id was different before updating request.ask.slots, and that id was used to set the state in mockmarket.
* Change filled/cleanup future to nil, so no await is needed
* add wait to allow items to be added to queue
* do not unpause queue when seen items are pushed
* re-add seen item back to queue once paused
Previously, when a seen item was processed, it was first popped off the queue, then the queue was paused waiting to process that item once the queue was unpaused. Now, when a seen item is processed, it is popped off the queue, the queue is paused, then the item is re-added to the queue and the queue will wait until unpaused before it will continue popping items off the queue. If the item was not re-added to the queue, it would have been processed immediately once unpaused, however there may have been other items with higher priority pushed to the queue in the meantime. The queue would not be unpaused if those added items were already seen. In particular, this may happen when ignored items due to lack of availability are re-added to a paused queue. Those ignored items will likely have a higher priority than the item that was just seen (due to it having been processed first), causing the queue to the be paused.
* address PR comments
* integration: move REST API tests into their own module
* integration: move upload and download tests into their own module
* integration: move purchasing tests into their own module
* integration: move marketplace tests to the right module
* integration: mine a block *after* starting nodes
To ensure that tests involving multiple nodes do
not start with out-of-sync clocks
* Fix: do not swallow CancellationErrors
* integration: avoid underflow in UInt256
* network: remove unnecessary error handling
No Exceptions can occur, only Defects, because everything
is asyncSpawned.
Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
* network: do not raise in asyncSpawned proc
Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
---------
Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
* Updates logging for file upload
* Restores trace for placing block and proof in repo store
* Reduces logging while transmitting blocks
* unnecessary formatter
* Clean up some more download related traces
* much better
* Review comment by dryajov
* fix: make sure requestStorage is mined
* fix: correct place to plug confirm
* test: fixing contracts tests
* feat: one confirmation for all transactions
* fix: don't wait for confirmations only mined block
Adam Uhlíř
Marcin Czenko
Slava
markspanbroek
Eric
Arnaud
Ben Bierens
Arnaud
Giuliano Mega
Tomasz Bekas