904dda47ed
nftnl_rule_get_u32() nftnl_rule_get_u64() nftnl_rule_get_str() closes #641 should fix #582 |
||
---|---|---|
.. | ||
scripts | ||
Makefile | ||
README.md | ||
nfct_get.c | ||
nftnlrdr.c | ||
nftnlrdr.h | ||
nftnlrdr_misc.c | ||
nftnlrdr_misc.h | ||
nftpinhole.c | ||
nftpinhole.h | ||
test_nfct_get.c | ||
testnftnlrdr.c | ||
testnftpinhole.c | ||
tiny_nf_nat.h |
README.md
Miniupnpd nftables support by Tomofumi Hayashi (s1061123@gmail.com).
Supported Features
- IPv4 NAT/Filter add/del.
How to build miniupnpd with nftables:
Run 'configure' command with '--firewall=nftables',
./configure --firewall=nftables && make
How to Run
Please run 'netfilter_nft/scripts/nft_init.sh' to add miniupnpd chain.
sudo ./netfilter_nft/scripts/nft_init.sh
FAQ
I will add this section when I get question. Comments and Questions are welcome ;)
Custom Chains
NFTables is very flexible but it comes with some restrictions because of that. If there is a second filter chain than all packets that were passed before with the miniupnpd chain will be reevaluated. This also means that if the chain is a drop chain you loose the packets. In that case you really want to use a custom chain and jump to it in your filter chain. miniupnpd should save all accept rules in that custom chain. For NAT it is the same, a second chain will also evaluate the packets again and therefore it is possible that a second SNAT or DNAT is performed.
The following is used in miniupnpd for a table setup but it can be customized:
table inet filter {
chain forward {
type filter hook forward priority 0;
policy drop;
# miniupnpd
jump miniupnpd
# Add other rules here
}
# miniupnpd
chain miniupnpd {
}
chain prerouting {
type nat hook prerouting priority -100;
policy accept;
# miniupnpd
jump prerouting_miniupnpd
# Add other rules here
}
chain postrouting {
type nat hook postrouting priority 100;
policy accept;
# miniupnpd
jump postrouting_miniupnpd
# Add other rules here
}
chain prerouting_miniupnpd {
}
chain postrouting_miniupnpd {
}
}
and the following config settings can be used to change the tables and chains :
upnp_table_name=filter
upnp_nat_table_name=filter
upnp_forward_chain=miniupnpd
upnp_nat_chain=prerouting_miniupnpd
upnp_nat_postrouting_chain=postrouting_miniupnpd