Summary:
public
This adds the ability to load “unbundles” in RN android apps. Unbundles are created by invoking the packager with the `unbundle` command rather than `bundle`.
The code detects usage of an “unbundle” by checking for the existence of a specific asset.
Reviewed By: astreet
Differential Revision: D2739596
fb-gh-sync-id: d0813c003fe0fa7b47798b970f56707079bfa5d7
Summary:
public
Since the combination of node and haste modules (and modules that can be required as both node and haste module) can lead to situations where it’s impossible to decide an unambiguous module identifier, this diff switches all module ids to integers. Each integer maps to an absolute path to a JS file on disk.
We also had a problem, where haste modules outside and inside node_modules could end up with the same module identifier.
This problem has not manifested yet, because the last definition of a module wins. It becomes a problem when writing file-based unbundle modules to disk: the same file might be written to concurrently, leading to invalid code.
Using indexed modules will also help indexed file unbundles, as we can encode module IDs as integers rather than scanning string IDs.
Reviewed By: martinbigio
Differential Revision: D2842418
fb-gh-sync-id: 97addd28e964ac5f2b5081dcd3f36124d2864df8
Summary:
public
We had a bug a few weeks ago which caused transform errors not to be shown properly. The problem was on this piece of code, so lets unit test it.
Reviewed By: davidaurelio
Differential Revision: D2849990
fb-gh-sync-id: 9f6bb8a8b7d59bbaa3577c29cee37fb23a50d66f
Summary:
There's a long standing issue on open source (https://github.com/facebook/react-native/issues/4968). Until someone gets some free bandwidth to fix it lets at the very least improve the error message to guide users to the issue and suggest workarounds.
public
Reviewed By: mkonicek
Differential Revision: D2849051
fb-gh-sync-id: ef7913442ceabcab2076141bd13ab1ceeb529759
Summary:
At the moment we have to disable strict mode for the transform-es2015-modules-commonjs because strict mode leaks to the global scope and breaks the bridge. It was due to the way the polyfills were bundled in the package. To fix it, I wrapped the polyfill modules in an IIFE. Then when strict mode was enabled some polyfills were broken due to strict mode errors so that was fixed too. Also removed the IIFE from the polyfills that included one.
This diff doesn't enable the strict mode transform since some internal facebook modules depend on it not being enabled. When #5214 lands we could make the default babel config shipped with OSS react-native use strict mode modules and facebook could just modify the babel config to disable it if needed.
This will allow removing `"strict": false` from https://github.com/facebook/react-native/blob/master/packager/react-packager/.babelrc#L16Fixes#5316
Closes https://github.com/facebook/react-native/pull/5422
Reviewed By: svcscm
Differential Revision: D2846422
Pulled By: davidaurelio
fb-gh-sync-id: a3e2f8909aa87dabab2b872c61b887e80220fb56
Summary:
This implements #5073. It adds a static method `PixelRatio.pixel()` which returns the smallest drawable line width, primarily for use in styles.
It also updates the example apps to use the new function.
Closes https://github.com/facebook/react-native/pull/5076
Reviewed By: svcscm
Differential Revision: D2799849
Pulled By: nicklockwood
fb-gh-sync-id: b83a77790601fe882affbf65531114e7c5cf4bdf
Summary:
public
- Tweak OSS server to enable the HMR connection
- Remove client gating code.
- Resolve internal transforms plugins
After this diff, Hot Loading should work on OSS.
Reviewed By: javache
Differential Revision: D2803620
fb-gh-sync-id: b678180c884d2bfaf454edf9e7abe6b3b3b32ebe
Summary:
We used to only cache the `dependencies` and `name` of a Module but we were actually accessing two more fields (async dependencies and the `isHaste` field) which meant we were always reading every single file from disk. In D2644383 I noticed that but realized that the Promise was cached, meaning we would read every file once *per instance* and I didn't think about cross-instance reads over time. My initial version added more caching (but also missed the `isHaste` field) but then I got rid of the cache call for `dependencies`. So my change from before didn't make anything worse but it also didn't make anything better. This change now caches everything until the contents of the file actually changes.
public
Reviewed By: martinbigio
Differential Revision: D2831569
fb-gh-sync-id: 74081abc0ce3ca96b4e56c3c9b6d24aa84f7496c
Summary:
It's possible that a mock doesn't have an associated real module that it maps to. This is actually very common in www, where we have JS mocks for dynamic PHP JS modules. The implementation I chose seems like the smartest one for now: if a module cannot be resolved, we look up whether we have a mock with the same id. If we do, we just resolve it. That's it! And it also only does the minimum amount of resolution necessary.
public
Reviewed By: martinbigio
Differential Revision: D2822277
fb-gh-sync-id: 7c9fbb6f69a0c0c85157c0650f5719d94a02410e
Summary:
One consequence we didn't predict after introducing the Internal Transform Pipeline, was that when the workers would get started, we won't require the external transformer the user specified up until the first time each worker received a job. There're 2 visible consequences of this: (1) the transform progress bar seems to get stuck for about 5 seconds the first time the packager receives a request and (2) the first N (# of cores) HMR requests take way longer (about 4 seconds with FB's transformer instead of << 1 second) as we need to require lots of modules.
This diff creates a temporary file for the js transformer workers that requires the user-specified transform file eagerly.
That makes sure workers have imported babel and the transforms before receiving the first request.
There are better ways to do this, like adding an `init()` method to the workers and call that eagerly. I will follow with another diff doing that.
public
Reviewed By: javache
Differential Revision: D2812153
fb-gh-sync-id: 15be316b792d1acd878ed9303bea398aa0b52e1d
Summary:
I'm working on deploying haste2 with jest. This updates all the files that require changes for this to work and they are backwards compatible with the current version of jest.
* package.json was just outdated. I think haste1's liberal handling with collisions made this a "non-issue"
* env.js didn't properly set up ErrorUtils, also unsure why that isn't a problem in jest right now already?
* some things were mocking things they shouldn't
* Because of the regex that matches against providesModule and System.import, it isn't possible to list module names more than once. We have multiple tests reusing the same providesModule ids and using System.import with modules that only exist virtually within that test. Splitting up the strings makes the regexes work (we do the same kind of splitting on www sometimes if we need to) and using different providesModule names in different test files fixes the problem. I think the BundlesLayoutIntegration-test is going to be deleted, so this doesn't even matter.
public
Reviewed By: voideanvalue
Differential Revision: D2809681
fb-gh-sync-id: 8fe6ed8b5a1be28ba141e9001de143e502693281
Summary:
public
Fixes a terrible bug due to which when Hot Loading enabled when the user reloads we'll serve them the first `hot` bundle he requested. This happened because when HMR enabled we bailed out after sending the HMR updates and didn't rebuild any of the bundles the user requested before. As a consequence, when they reload we'd sent him the first and only one we ever built.
The fix is to tweak the hmr listener to return a promise. This way we can run the remaining code on the file change listener just after the HMR stuff finishes. We need to do it this way to avoid the remaining stuff to compete for CPU with the HMR one and give the best possible experience when HMR is enabled.
Reviewed By: davidaurelio
Differential Revision: D2811382
fb-gh-sync-id: 906932d71f35467485cf8a865a8d59f4d2ff41a0
Summary:
public
We're not planning to accept file removals in the short term on the HMR interface so lets bail when a file is removed (before this this we were throwing when trying to get the shallow dependencies).
Reviewed By: yungsters
Differential Revision: D2810534
fb-gh-sync-id: f2733382f4a2619e22bdf1163aa4180694fff9f8
Summary:
This fixes an error introduced in `0.18.0-rc`
`node` and `npm` isn't available if the developer is using `nvm` or `nodeenv`. XCode throws an error because of the call to `npm`. Simple move the line to after `node` and `npm` has been setup.
Closes https://github.com/facebook/react-native/pull/5156
Reviewed By: svcscm
Differential Revision: D2807589
Pulled By: androidtrunkagent
fb-gh-sync-id: 30c33145b2cb6f30ff67f6648153d5aa67fb74ed
Summary:
public
We want to support Hot Loading on the packager itself instead of on the transformer. This will allow us to enable it on OSS (and for any scripting language, yay!).
For now to enable Hot Loading the packager's internals transforms need to be manually enabled (start packager with `--enable-internal-transforms`). I think the internal pipeline should always be enabled as it doesn't affect performance if there're no transforms and the user can disable Hot Loading through the setting on the app though. I'll tweak this on a follow up commit.
Reviewed By: vjeux
Differential Revision: D2801343
fb-gh-sync-id: 563984d77b10c3925fda6fd5616b814cdbea2c66
Summary:
public
Requires are transformed when building the bundle but we forgot doing so when building the HMR one.
Reviewed By: vjeux
Differential Revision: D2801319
fb-gh-sync-id: ae70612945ab81a05154b14d6b756ef390770542
Summary:
public
Fixes an issue on the transforms pipeline which caused not to pipe errors that occured on the external transformer to JSTransformer.
Reviewed By: yungsters
Differential Revision: D2806498
fb-gh-sync-id: c9347d1957a3a9320b3f177ff9b19bf3802087a0
Summary:
public
Before this diff we were only accepting the module that was modified but the user. This works fine as long as the user doesn't modify the dependencies a module has but once he starts doing so the HMR runtime may fail when updating modules' code because they might might a few dependencies. For instance, if the user changes the `src` a `Image` has to reference an image (using the new asset system) that wasn't on the original bundle the user will get a red box. This diff addresses this by diffing the modules the app currently has with the new ones it should have and including all of them on the HMR update. Note this diffing is only done when the we realize the module that was modified changed it's dependencies so there's no additional overhead on this change.
Reviewed By: vjeux
Differential Revision: D2796325
fb-gh-sync-id: cac95f2e995310634c221bbbb09d9f3e7bc03e8d
Summary:
public
This diff introduces an internal transforms pipeline that integrates with the external one. This has been a feature we've been looking to implement for a long time to use babel instead of `replace` with regexps on many parts of the packager.
Also, to split the bundle we'll need to run one transform. Internally for Facebook we can run the system-import transform altogether withe the other ones. For OSS we offer `transformer.js` which people can use out of the box if they're writing ES6 code. For those people, `transformer.js` will also run the internal transforms`. However they might want to tune the transforms, or even write the code on another language that compiles to Javascript and use a complete different transformer. On those cases we'll need to run the external transforms first and pipe the output through the internal transforms. Note that the order it's important as the internal transforms assume the code is written in JS, though the original code could be on other scripting languages (CoffeeScript, TypeScript, etc).
Reviewed By: davidaurelio
Differential Revision: D2725109
fb-gh-sync-id: d764e209c78743419c4cb97068495c771372ab90
Summary:
We don't (yet) treat these the same as any other modules because we still have special resolution rules for them in the packager allowing the use of `providesModule`, but I believe this allows people to use npm react in their RN projects and not have duplicate copies of React. Fixesfacebook/react-native#2985.
This relies on fbjs 0.6, which includes `.flow` files alongside the `.js` files to allow them to be typechecked without additional configuration. This also uses react 0.14.5, which shims a couple of files (as `.native.js`) to avoid DOM-specific bits. Once we fix these in React, we will use the same code on web and native. Hopefully we can also remove the packager support I'm adding here for `.native.js`.
This diff is not the desired end state for us – ideally the packager would know nothing of react or fbjs, and we'll get there eventually by not relying on `providesModule` in order to load react and fbjs modules. (fbjs change posted here but not merged yet: https://github.com/facebook/fbjs/pull/84.)
This should also allow relay to work seamlessly with RN, but I haven't verified this.
public
Reviewed By: sebmarkbage
Differential Revision: D2786197
fb-gh-sync-id: ff50f28445e949edc9501f4b599df7970813870d
Summary:
These are the sources, not the target. Copy pasta from above.
Closes https://github.com/facebook/react-native/pull/4989
Reviewed By: svcscm
Differential Revision: D2795198
Pulled By: spicyj
fb-gh-sync-id: 61c52add02cb877284fbf62a4344361b5bf44515
Summary:
public
Before this this when a file was changed besides sending the HMR update we rebuild every single bundle that the packager had build (to serve it faster when the user hit cmd+r). Since when hot loading is enabled we don't do cmd+r all this work was pointless (except for when you're developing multiple apps using the same packager instance at the same time, which we can assume is very uncommon). As a consequence, the HMR update was competing with the rebundling job making HMR quite slow (i.e.: on one huge internal app it took up to 6s for the HMR changes to get applied).
So, this diff tweaks the file change listener so that we don't rebundle nor invoke the fileWatchers (use for live reload which is also useless when hot load is enabled) when hot loading is enabled. Also, it makes the HMR listener more high pri than the other listeners so that the HMR dev experience is as good as it can get.
Reviewed By: vjeux
Differential Revision: D2793827
fb-gh-sync-id: 724930db9f44974c15ad3f562910b0885e44efde
Summary:
public
Compute the dependencies of the bundle entry file just before sending HMR updates. In case the file that was changed doesn't belong to the bundle bail.
Reviewed By: vjeux
Differential Revision: D2793736
fb-gh-sync-id: f858e71b0dd5fe4f5b2307a22c6cef627eb66a22
David Aurelio
Martín Bigio
tfallon@mail.depaul.edu
Martin Konicek
Janic Duplessis
Pieter De Baets
Jan Kassens
Emil Sjölander
Christoph Pojer
Kyle Corbitt
Kelvin De Moya
Henrik Kok Jørgensen
Ben Alpert
wvengen
Ben Alpert