go-waku/library
Richard Ramos bbab0f1714
fix: add topic to broadcast and some comments to functions (#229)
2022-04-25 23:31:26 +04:00
..
README.md fix: c api and add some documentation (#219) 2022-03-22 12:30:14 -04:00
api.go fix: add topic to broadcast and some comments to functions (#229) 2022-04-25 23:31:26 +04:00
api_lightpush.go feat: kotlin android example (#226) 2022-04-12 08:12:14 -04:00
api_relay.go feat: kotlin android example (#226) 2022-04-12 08:12:14 -04:00
api_store.go feat: kotlin android example (#226) 2022-04-12 08:12:14 -04:00
api_utils.go feat: kotlin android example (#226) 2022-04-12 08:12:14 -04:00
response.go feat: kotlin android example (#226) 2022-04-12 08:12:14 -04:00

README.md

slug title name status tags editor contributors
Go-Waku v2 C Bindings draft go-waku Richard Ramos <richard@status.im>

This specification describes the API for consuming go-waku when built as a dynamic or static library

libgowaku.h

General

JSONResponse

All the API functions return a JSONResponse unless specified otherwise. JSONResponse is a char * whose format depends on whether the function was executed sucessfully or not:

// On failure:
{ "error": "the error message" }

// On success:
{ "result": ...  } // result format depends on the function response

Events

Asynchronous events require a callback to be registered. An example of an asynchronous event that might be emitted is receiving a message. When an event is emitted, this callback will be triggered receiving a json string with the following format:

{
	"nodeId": 0, // go-waku node that emitted the signal
	"type": "message", // type of signal being emitted. Currently only "message" is available
	"event": ... // format depends on the type of signal. In the case of "message", a waku message can be expected here
}

extern void gowaku_set_event_callback(void* cb)

Register callback to act as event handler and receive application signals, which are used to react to asyncronous events in waku.

Parameters

  1. void* cb: callback that will be executed when an async event is emitted. The function signature for the callback should be void myCallback(char* signalJSON)

Node management

extern char* gowaku_new(char* configJSON)

Initialize a go-waku node.

Parameters

  1. char* configJSON: JSON string containing the options used to initialize a go-waku node. It can be NULL to use defaults. All the keys from the configuration are optional. If a key is undefined, or null, a default value will be set
    // example config:
    {
        "host": "0.0.0.0", 
        "port": 60000, 
        "advertiseAddr": "1.2.3.4",
        "nodeKey": "0x123...567",
        "keepAliveInterval": 20,
        "relay": true,
        "minPeersToPublish": 0
    }
    
    • host - String (optional): Listening IP address. Default 0.0.0.0
    • port - Number (optional): Libp2p TCP listening port. Default 60000. Use 0 for random
    • advertiseAddr - String (optional): External address to advertise to other nodes.
    • nodeKey - String (optional): secp256k1 private key in Hex format (0x123...abc). Default random
    • keepAliveInterval - Number (optional): Interval in seconds for pinging peers to keep the connection alive. Default 20
    • relay - Boolean (optional): Enable relay protocol. Default true
    • minPeersToPublish - Number (optional). The minimum number of peers required on a topic to allow broadcasting a message. Default 0

Returns JSONResponse with a result containing an int which represents the nodeID which should be used in all calls from this API that require interacting with the node if the function executes successfully. An error message otherwise


extern char* gowaku_start(int nodeID)

Initialize a go-waku node mounting all the protocols that were enabled during the waku node initialization.

Parameters

  1. int nodeID: the node identifier obtained from a succesful execution of gowaku_new

extern char* gowaku_stop(int nodeID)

Stops a go-waku node

Parameters

  1. int nodeID: the node identifier obtained from a succesful execution of gowaku_new

Returns JSONResponse containing a null result if the function executes successfully. An error message otherwise


extern char* gowaku_peerid(int nodeID)

Obtain the peer ID of the go-waku node.

Parameters

  1. int nodeID: the node identifier obtained from a succesful execution of gowaku_new

Returns JSONResponse containing the peer ID (base58 encoded) if the function executes successfully. An error message otherwise


extern char* gowaku_listen_addresses(int nodeID)

Obtain the multiaddresses the wakunode is listening to

Parameters

  1. int nodeID: the node identifier obtained from a succesful execution of gowaku_new

Returns JSONResponse containing an array of multiaddresses if the function executes successfully. An error message otherwise

Connecting to peers

extern char* gowaku_add_peer(int nodeID, char* address, char* protocolID)

Add node multiaddress and protocol to the wakunode peerstore

Parameters

  1. int nodeID: the node identifier obtained from a succesful execution of gowaku_new
  2. char* address: multiaddress of the peer being added
  3. char* protocolID: protocol supported by the peer

Returns JSONResponse containing the peer ID (base58 encoded) of the peer that was added if the function executes successfully. An error message otherwise


extern char* gowaku_dial_peer(int nodeID, char* address, int ms)

Dial peer at multiaddress.

Parameters

  1. int nodeID: the node identifier obtained from a succesful execution of gowaku_new
  2. char* address: multiaddress of the peer being dialed
  3. int ms: max duration in milliseconds this function might take to execute. If the function execution takes longer than this value, the execution will be canceled and an error returned. Use 0 for unlimited duration

Returns JSONResponse with a null result if the function executes successfully. An error message otherwise


extern char* gowaku_dial_peerid(int nodeID, char* id, int ms)

Dial peer using peerID.

Parameters

  1. int nodeID: the node identifier obtained from a succesful execution of gowaku_new
  2. char* peerID: peerID to dial. The peer must be already known. It must have been added before with gowaku_add_peer or previously dialed with gowaku_dial_peer
  3. int ms: max duration in milliseconds this function might take to execute. If the function execution takes longer than this value, the execution will be canceled and an error returned. Use 0 for unlimited duration

Returns JSONResponse with a null result if the function executes successfully. An error message otherwise


extern char* gowaku_close_peer(int nodeID, char* address)

Disconnect a peer using its multiaddress

Parameters

  1. int nodeID: the node identifier obtained from a succesful execution of gowaku_new
  2. char* address: multiaddress of the peer being disconnected.

Returns JSONResponse with a null result if the function executes successfully. An error message otherwise


extern char* gowaku_close_peerid(int nodeID, char* id)

Disconnect a peer using its peerID Parameters

  1. int nodeID: the node identifier obtained from a succesful execution of gowaku_new
  2. char* peerID: peerID to disconnect.

Returns JSONResponse with a null result if the function executes successfully. An error message otherwise


extern char* gowaku_peer_cnt(int nodeID)

Obtain number of connected peers

Parameters

  1. int nodeID: the node identifier obtained from a succesful execution of gowaku_new

Returns JSONResponse containing an int with the number of connected peers. An error message otherwise


extern char* gowaku_peers(int nodeID)

Retrieve the list of peers known by the go-waku node

Parameters

  1. int nodeID: the node identifier obtained from a succesful execution of gowaku_new

Returns JSONResponse containing a list of peers. An error message otherwise. The list of peers has this format:

{
    "result":[
        ...
        {
            "peerID":"16Uiu2HAmJb2e28qLXxT5kZxVUUoJt72EMzNGXB47RedcBafeDCBA",
            "protocols":[
                "/ipfs/id/1.0.0",
                "/vac/waku/relay/2.0.0",
                "/ipfs/ping/1.0.0",
                ...
            ],
            "addrs":[
                "/ip4/1.2.3.4/tcp/30303",
                ...
            ],
            "connected":true
        }
    ]
}

Waku Relay

extern char* gowaku_content_topic(char* applicationName, unsigned int applicationVersion, char* contentTopicName, char* encoding)

Create a content topic string according to RFC 23

Parameters

  1. char* applicationName
  2. unsigned int applicationVersion
  3. char* contentTopicName
  4. char* encoding: depending on the payload, use proto, rlp or rfc26

Returns char * containing a content topic formatted according to RFC 23

/{application-name}/{version-of-the-application}/{content-topic-name}/{encoding}

--

extern char* gowaku_pubsub_topic(char* name, char* encoding)

Create a pubsub topic string according to RFC 23

Parameters

  1. char* name
  2. char* encoding: depending on the payload, use proto, rlp or rfc26

Returns char * containing a content topic formatted according to RFC 23

/waku/2/{topic-name}/{encoding}

extern char* gowaku_default_pubsub_topic()

Returns the default pubsub topic used for exchanging waku messages defined in RFC 10

Returns char * containing the default pubsub topic:

/waku/2/default-waku/proto

extern char* gowaku_relay_publish(int nodeID, char* messageJSON, char* topic, int ms)

Publish a message using waku relay.

Parameters

  1. int nodeID: the node identifier obtained from a succesful execution of gowaku_new
  2. char* messageJSON: json string containing the Waku Message
    {
        "payload":"", // base64 encoded payload. gowaku_utils_base64_encode can be used for this
        "contentTopic: "...",
        "version": 1,
        "timestamp": 1647963508000000000 // Unix timestamp in nanoseconds
    }
    
  3. char* topic: pubsub topic. Set to NULL to use the default pubsub topic
  4. int ms: max duration in milliseconds this function might take to execute. If the function execution takes longer than this value, the execution will be canceled and an error returned. Use 0 for unlimited duration

Returns JSONResponse containing the message ID. An error message otherwise


extern char* gowaku_enough_peers(int nodeID, char* topic)

Determine if there are enough peers to publish a message on a topic.

Parameters

  1. int nodeID: the node identifier obtained from a succesful execution of gowaku_new
  2. char* topic: pubsub topic to verify. Use NULL to verify the number of peers in the default pubsub topic

Returns JSONResponse with a boolean indicating if there are enough peers or not. An error message otherwise


extern char* gowaku_relay_subscribe(int nodeID, char* topic)

Subscribe to a WakuRelay topic to receive messages.

Parameters

  1. int nodeID: the node identifier obtained from a succesful execution of gowaku_new
  2. char* topic: pubsub topic to subscribe to. Use NULL for subscribing to the default pubsub topic

Returns JSONResponse with a subscription ID. An error message otherwise

Events When a message is received, a ``"message" event is emitted containing the message, pubsub topic, and nodeID in which the message was received. Here's an example event that could be received:

{
  "nodeId":1,
  "type":"message",
  "event":{
    "subscriptionID":"...",
    "pubsubTopic":"/waku/2/default-waku/proto",
    "messageID":"0x6496491e40dbe0b6c3a2198c2426b16301688a2daebc4f57ad7706115eac3ad1",
    "wakuMessage":{
      "payload":"...", // base64 encoded message. Use gowaku_decode_data to decode
      "contentTopic":"ABC",
      "version":1,
      "timestamp":1647826358000000000 // in nanoseconds
    }
  }
}

extern char* gowaku_relay_close_subscription(int nodeID, char* subsID)

Closes a waku relay subscription. No more messages will be received from this subscription

Parameters

  1. int nodeID: the node identifier obtained from a succesful execution of gowaku_new
  2. char* subsID: subscription ID to close

Returns JSONResponse with null response if successful. An error message otherwise


extern char* gowaku_relay_unsubscribe_from_topic(int nodeID, char* topic)

Closes the pubsub subscription to a pubsub topic. Existing subscriptions will not be closed, but they will stop receiving messages

Parameters

  1. int nodeID: the node identifier obtained from a succesful execution of gowaku_new
  2. char* topic: pubsub topic to unsubscribe. Use NULL for unsubscribe from the default pubsub topic

Returns JSONResponse with null response if successful. An error message otherwise

Waku Message Utils

extern char* gowaku_encode_data(char* data, char* keyType, char* key, char* signingKey, int version)

Encode a byte array according to RFC 26. This function can be used to encrypt the payload of a waku message

Parameters

  1. char* data: byte array to encode in base64 format. (gowaku_utils_base64_encode can be used to encode the message)
  2. char* keyType: defines the type of key to use:
    • NONE: no encryption will be applied
    • ASYMMETRIC: encrypt the payload using a secp256k1 public key
    • SYMMETRIC: encrypt the payload using a 32 bit key.
  3. char* key: hex key (0x123...abc) used for encrypting the data.
    • When version is 0: No encryption is used
    • When version is 1
      • If using ASYMMETRIC encoding, key must contain a secp256k1 public key to encrypt the data with
      • If using SYMMETRIC encoding, key must contain a 32 bytes symmetric key.
  4. char* signingKey: Hex string containing a secp256k1 private key to sign the encoded message, It's optional. To not sign the message use NULL instead.
  5. int version: is used to define the type of payload encryption

Returns JSONResponse with the base64 encoded payload. An error message otherwise.


extern char* gowaku_decode_data(char* data, char* keyType, char* key, int version)

Decode a byte array according to RFC 26. This function can be used to decrypt the payload of a waku message

Parameters

  1. char* data: byte array to decode, in base64.
  2. char* keyType: defines the type of key to use:
    • NONE: no encryption was used in the payload
    • ASYMMETRIC: decrypt the payload using a secp256k1 public key
    • SYMMETRIC: decrypt the payload using a 32 bit key.
  3. char* key: hex key (0x123...abc) used for decrypting the data.
    • When version is 0: No encryption is used
    • When version is 1
      • If using ASYMMETRIC encoding, key must contain a secp256k1 private key to decrypt the data
      • If using SYMMETRIC encoding, key must contain a 32 bytes symmetric key.
  4. int version: is used to define the type of payload encryption

Returns JSONResponse with the decoded payload. An error message otherwise. The decoded payload has this format:

{
    "result": {
        "pubkey":"0x04123...abc", // secp256k1 public key
        "signature":"0x123...abc", // secp256k1 signature
        "data":"...", // base64 encoded
        "padding":"..." // base64 encoded
    }
}

extern char* gowaku_utils_base64_encode(char* data)

Encode a byte array to base64 useful for creating the payload of a waku message in the format understood by gowaku_relay_publish

Parameters

  1. char* data: byte array to encode

Returns A char * containing the base64 encoded byte array


extern char* gowaku_utils_base64_decode(char* data)

Decode a base64 string (useful for reading the payload from waku messages)

Parameters

  1. char* data: base64 encoded byte array to decode

Returns JSONResponse with the decoded payload. An error message otherwise. The decoded payload has this format:

Copyright

Copyright and related rights waived via CC0.