consul/ui/packages/consul-ui/translations/routes/en-us.yaml

339 lines
13 KiB
YAML
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

dc:
show:
title: Cluster Overview
serverstatus:
title: Server status
unassigned: Unassigned Zones
tolerance:
header: Server fault tolerance
immediate:
header: Immediate
body: the number of healthy active voting servers that can fail at once without causing an outage
optimistic:
header: Optimistic
body: the number of healthy active and back-up voting servers that can fail gradually without causing an outage
cataloghealth:
title: Health
license:
title: License
nodes:
index:
empty:
header: |
{items, select,
0 {Welcome to Nodes}
other {No Nodes found}
}
body: |
<p>
{items, select,
0 {There don't seem to be any registered Nodes in this Consul cluster}
other {No Nodes were found matching your search}
}, or you may not have <code>service:read</code> and <code>node:read</code> permissions access to this view.
</p>
show:
rtt:
title: Round Trip Time
metadata:
title: Metadata
sessions:
title: Lock Sessions
header: Welcome to Lock Sessions
body: |
<p>
Consul provides a session mechanism which can be used to build distributed locks. Sessions act as a binding layer between Nodes, Health Checks, and Key/Value data. There are currently no Lock Sessions present, or you may not have <code>key:read</code> or <code>session:read</code> permissions.
</p>
services:
title: Service Instances
empty: |
<p>
This Node has no Service Instances{items, select,
0 {}
other { matching that search}
}.
</p>
healthchecks:
title: Health Checks
empty: |
<p>
This Node has no Health Checks{items, select,
0 {}
other { matching that search}
}.
</p>
critical-serf-notice:
header: Failing serf check
body: |
<p>
This node has a failing serf node check. The health statuses shown on this page are the statuses as they were known before the node became unreachable.
</p>
services:
index:
empty:
header: |
{items, select,
0 {Welcome to Services}
other {No Services found}
}
body: |
<p>
{items, select,
0 {There don't seem to be any registered services in this Consul cluster}
other {No Services were found matching your search}
}, or you may not have <code>service:read</code> and <code>node:read</code> access to this view. Use Terraform, Kubernetes CRDs, Vault, or the Consul CLI to register Services.
</p>
instance:
exposedpaths:
intro: |
<p>
The following list shows individual HTTP paths exposed through Envoy for external services like Prometheus. Read more about this in our <a href="{CONSUL_DOCS_URL}/connect/registration/service-registration#expose-paths-configuration-reference" target="_blank" rel="noopener noreferrer">documentation</a>.
</p>
empty:
body: |
<p>
There are no individual HTTP paths exposed through Envoy for external services like Prometheus. Read more about this in our <a href="{CONSUL_DOCS_URL}/connect/registration/service-registration#expose-paths-configuration-reference" target="_blank" rel="noopener noreferrer">documentation</a>.
</p>
healthchecks:
empty: |
<p>
This instance has no health checks{items, select,
0 {}
other { matching that search}
}.
</p>
critical-serf-notice:
header: Failing serf check
body: |
<p>
This instance has a failing serf node check. The health statuses shown on this page are the statuses as they were known before the node became unreachable.
</p>
upstreams:
tproxy-mode:
header: Transparent proxy mode
body: |
<p>
The upstreams listed on this page have been defined in a proxy registration. There may be more upstreams, though, as "transparent" mode is enabled on this proxy.
</p>
footer: |
<p>
<a href="{CONSUL_DOCS_URL}/connect/transparent-proxy" target="_blank" rel="noopener noreferrer">Read the documentation
</p>
empty: |
<p>
This Service Instance has no Upstreams{items, select,
0 {}
other { matching that search}
}.
</p>
show:
topology:
notices:
open: Expand Banners
close: Collapse Banners
notice:
filtered-by-acls:
header: Limited Access
body: This service may have dependencies you wont see because you dont have access to them.
default-allow:
header: Intentions are set to default allow
body: Your Intention settings are currently set to default allow. This means that this view will show connections to every service in your cluster. We recommend changing your Intention settings to default deny and creating specific Intentions for upstream and downstream services for this view to be useful.
footer: |
<p>
<a href="{route_intentions}">Edit Intentions</a>
</p>
wildcard-intention:
header: Permissive Intention
body: One or more of your Intentions are set to allow traffic to and/or from all other services in a namespace. This Topology view will show all of those connections if that remains unchanged. We recommend setting more specific Intentions for upstream and downstream services to make this vizualization more useful.
footer: |
<p>
<a href="{route_intentions}">Edit Intentions</a>
</p>
not-defined-intention:
header: Connections are not explicitly defined
body: There appears to be an Intention allowing traffic, but the services are unable to communicate until that connection is enabled by defining an explicit upstream or proxies are set to 'transparent' mode.
footer: |
<p>
<a href="{CONSUL_DOCS_URL}/connect/registration/service-registration#upstreams" target="_blank" rel="noopener noreferrer">Read the documentation</a>
</p>
no-dependencies:
header: No dependencies
body: The service you are viewing currently has no dependencies. You will only see metrics for the current service until dependencies are added.
footer: |
<p>
<a href="{CONSUL_DOCS_URL}/connect/registration/service-registration#upstream-configuration-reference" target="_blank" rel="noopener noreferrer">Read the documentation</a>
</p>
acls-disabled:
header: Enable ACLs
body: This connect-native service may have dependencies, but Consul isn't aware of them when ACLs are disabled. Enable ACLs to make this view more useful.
footer: |
<p>
<a href="{CONSUL_DOCS_URL}/security/acl/acl-system#configuring-acls" target="_blank" rel="noopener noreferrer">Read the documentation</a>
</p>
intentions:
index:
empty:
header: |
{items, select,
0 {Welcome to Intentions}
other {No Intentions found}
}
body: |
<p>
{items, select,
0 {There don't seem to be any Intentions in this Consul cluster}
other {No Intentions were found matching your search}
}, or you may not have <code>intentions:read</code> permissions access to this view.
</p>
instances:
empty: |
<p>
This Service has no Instances{items, select,
0 {}
other { matching that search}
}.
</p>
services:
intro: |
<p>
The following services may receive traffic from external services through this gateway. Learn more about configuring gateways in our <a href="{CONSUL_DOCS_URL}/connect/terminating-gateway" target="_blank" rel="noopener noreferrer">step-by-step guide</a>.
</p>
empty: |
<p>
There are no Services{items, select,
0 {}
other { matching that search}
}.
</p>
tags:
empty:
header: Welcome to Tags
body: |
<p>
There are no tags for this Service.
</p>
upstreams:
intro: |
<p>
Upstreams are services that may receive traffic from this gateway. If you are not using Consul DNS, please make sure your <code>Host:</code> header uses the correct domain name for the gateway to correctly proxy to its upstreams. Learn more about configuring gateways in our <a href="{CONSUL_DOCS_URL}/connect/ingress-gateways" target="_blank" rel="noopener noreferrer">documentation</a>.
</p>
empty: |
<p>
This Service has no Upstreams{items, select,
0 {}
other { matching that search}
}.
</p>
routing-config:
source: Routing Configuration
intentions:
index:
empty:
header: |
{items, select,
0 {Welcome to Intentions}
other {No Intentions found}
}
body: |
<p>
{items, select,
0 {There don't seem to be any Intentions in this Consul cluster}
other {No Intentions were found matching your search}
}, or you may not have <code>intentions:read</code> permissions access to this view.
</p>
kv:
index:
empty:
header: |
{items, select,
0 {Welcome to Key/Value}
other {No Key/Values found}
}
body: |
<p>
{items, select,
0 {There don't seem to be any K/V pairs in this Consul cluster yet}
other {No K/V pairs were found matching your search}
}, or you may not have <code>key:read</code> permissions access to this view.
</p>
acls:
tokens:
index:
empty:
header: |
{items, select,
0 {Welcome to Tokens}
other {No Tokens found}
}
body: |
<p>
{items, select,
0 {There don't seem to be any Tokens}
other {No Tokens were found matching your search}
}, or you may not have <code>acl:read</code> permissions to view Tokens yet.
</p>
policies:
index:
empty:
header: |
{items, select,
0 {Welcome to Policies}
other {No Policies found}
}
body: |
<p>
{items, select,
0 {There don't seem to be any Policies}
other {No Policies were found matching your search}
}, or you may not have <code>acl:read</code> permissions to view Policies yet.
</p>
roles:
index:
empty:
header: |
{items, select,
0 {Welcome to Roles}
other {No Roles found}
}
body: |
<p>
{items, select,
0 {There don't seem to be any Roles}
other {No Roles were found matching your search}
}, or you may not have <code>acl:read</code> permissions to view Roles yet.
</p>
auth-methods:
show:
binding-rules:
empty:
header: No Binding Rules
body: |
<p>
Binding rules allow an operator to express a systematic way of automatically linking roles and service identities to newly created tokens without operator intervention.
</p>
nspace-rules:
empty:
header: No Namespace Rules
body: |
<p>
A set of rules that can control which namespace tokens created via this auth method will be created within. Unlike binding rules, the first matching namespace rule wins.
</p>
index:
empty:
header: |
{items, select,
0 {Welcome to Auth Methods}
other {No Auth Methods found}
}
body: |
<p>
{items, select,
0 {There don't seem to be any Auth Methods}
other {No Auth Methods were found matching your search}
}, or you may not have <code>acl:read</code> permissions to view Auth Methods yet.
</p>