mirror of https://github.com/status-im/consul.git
221 lines
13 KiB
Plaintext
221 lines
13 KiB
Plaintext
---
|
||
layout: docs
|
||
page_title: Server Performance
|
||
sidebar_title: Server Performance
|
||
description: >-
|
||
Consul requires different amounts of compute resources, depending on cluster
|
||
size and expected workload. This guide provides guidance on choosing compute
|
||
resources.
|
||
---
|
||
|
||
# Server Performance
|
||
|
||
Since Consul servers run a [consensus protocol](/docs/internals/consensus) to
|
||
process all write operations and are contacted on nearly all read operations, server
|
||
performance is critical for overall throughput and health of a Consul cluster. Servers
|
||
are generally I/O bound for writes because the underlying Raft log store performs a sync
|
||
to disk every time an entry is appended. Servers are generally CPU bound for reads since
|
||
reads work from a fully in-memory data store that is optimized for concurrent access.
|
||
|
||
<a name="minimum"></a>
|
||
|
||
## Minimum Server Requirements
|
||
|
||
In Consul 0.7, the default server [performance parameters](/docs/agent/options#performance)
|
||
were tuned to allow Consul to run reliably (but relatively slowly) on a server cluster of three
|
||
[AWS t2.micro](https://aws.amazon.com/ec2/instance-types/) instances. These thresholds
|
||
were determined empirically using a leader instance that was under sufficient read, write,
|
||
and network load to cause it to permanently be at zero CPU credits, forcing it to the baseline
|
||
performance mode for that instance type. Real-world workloads typically have more bursts of
|
||
activity, so this is a conservative and pessimistic tuning strategy.
|
||
|
||
This default was chosen based on feedback from users, many of whom wanted a low cost way
|
||
to run small production or development clusters with low cost compute resources, at the
|
||
expense of some performance in leader failure detection and leader election times.
|
||
|
||
The default performance configuration is equivalent to this:
|
||
|
||
```javascript
|
||
{
|
||
"performance": {
|
||
"raft_multiplier": 5
|
||
}
|
||
}
|
||
```
|
||
|
||
<a name="production"></a>
|
||
|
||
## Production Server Requirements
|
||
|
||
When running Consul 0.7 and later in production, it is recommended to configure the server
|
||
[performance parameters](/docs/agent/options#performance) back to Consul's original
|
||
high-performance settings. This will let Consul servers detect a failed leader and complete
|
||
leader elections much more quickly than the default configuration which extends key Raft
|
||
timeouts by a factor of 5, so it can be quite slow during these events.
|
||
|
||
The high performance configuration is simple and looks like this:
|
||
|
||
```javascript
|
||
{
|
||
"performance": {
|
||
"raft_multiplier": 1
|
||
}
|
||
}
|
||
```
|
||
|
||
This value must take into account the network latency between the servers and the read/write load on the servers.
|
||
|
||
The value of `raft_multiplier` is a scaling factor and directly affects the following parameters:
|
||
|
||
| Param | Value | |
|
||
| ------------------ | -----: | ------: |
|
||
| HeartbeatTimeout | 1000ms | default |
|
||
| ElectionTimeout | 1000ms | default |
|
||
| LeaderLeaseTimeout | 500ms | default |
|
||
|
||
By default, Consul uses a scaling factor of `5` (i.e. `raft_multiplier: 5`), which results in the following values:
|
||
|
||
| Param | Value | Calculation |
|
||
| ------------------ | -----: | ----------: |
|
||
| HeartbeatTimeout | 5000ms | 5 x 1000ms |
|
||
| ElectionTimeout | 5000ms | 5 x 1000ms |
|
||
| LeaderLeaseTimeout | 2500ms | 5 x 500ms |
|
||
|
||
~> **NOTE** Wide networks with more latency will perform better with larger values of `raft_multiplier`.
|
||
|
||
The trade off is between leader stability and time to recover from an actual
|
||
leader failure. A short multiplier minimizes failure detection and election time
|
||
but may be triggered frequently in high latency situations. This can cause
|
||
constant leadership churn and associated unavailability. A high multiplier
|
||
reduces the chances that spurious failures will cause leadership churn but it
|
||
does this at the expense of taking longer to detect real failures and thus takes
|
||
longer to restore cluster availability.
|
||
|
||
Leadership instability can also be caused by under-provisioned CPU resources and
|
||
is more likely in environments where CPU cycles are shared with other workloads.
|
||
In order for a server to remain the leader, it must send frequent heartbeat
|
||
messages to all other servers every few hundred milliseconds. If some number of
|
||
these are missing or late due to the leader not having sufficient CPU to send
|
||
them on time, the other servers will detect it as failed and hold a new
|
||
election.
|
||
|
||
It's best to benchmark with a realistic workload when choosing a production server for Consul.
|
||
Here are some general recommendations:
|
||
|
||
- Consul will make use of multiple cores, and at least 2 cores are recommended.
|
||
|
||
- Spurious leader elections can be caused by networking
|
||
issues between the servers or insufficient CPU resources. Users in cloud environments
|
||
often bump their servers up to the next instance class with improved networking
|
||
and CPU until leader elections stabilize, and in Consul 0.7 or later the [performance
|
||
parameters](/docs/agent/options#performance) configuration now gives you tools
|
||
to trade off performance instead of upsizing servers. You can use the [`consul.raft.leader.lastContact`
|
||
telemetry](/docs/agent/telemetry#last-contact) to observe how the Raft timing is
|
||
performing and guide the decision to de-tune Raft performance or add more powerful
|
||
servers.
|
||
|
||
- For DNS-heavy workloads, configuring all Consul agents in a cluster with the
|
||
[`allow_stale`](/docs/agent/options#allow_stale) configuration option will allow reads to
|
||
scale across all Consul servers, not just the leader. Consul 0.7 and later enables stale reads
|
||
for DNS by default. See [Stale Reads](https://learn.hashicorp.com/tutorials/consul/dns-caching#stale-reads) in the
|
||
[DNS Caching](https://learn.hashicorp.com/tutorials/consul/dns-caching) guide for more details. It's also good to set
|
||
reasonable, non-zero [DNS TTL values](https://learn.hashicorp.com/tutorials/consul/dns-caching#ttl-values) if your clients will
|
||
respect them.
|
||
|
||
- In other applications that perform high volumes of reads against Consul, consider using the
|
||
[stale consistency mode](/api/features/consistency#stale) available to allow reads to scale
|
||
across all the servers and not just be forwarded to the leader.
|
||
|
||
- In Consul 0.9.3 and later, a new [`limits`](/docs/agent/options#limits) configuration is
|
||
available on Consul clients to limit the RPC request rate they are allowed to make against the
|
||
Consul servers. After hitting the limit, requests will start to return rate limit errors until
|
||
time has passed and more requests are allowed. Configuring this across the cluster can help with
|
||
enforcing a max desired application load level on the servers, and can help mitigate abusive
|
||
applications.
|
||
|
||
## Memory Requirements
|
||
|
||
Consul server agents operate on a working set of data comprised of key/value
|
||
entries, the service catalog, prepared queries, access control lists, and
|
||
sessions in memory. These data are persisted through Raft to disk in the form
|
||
of a snapshot and log of changes since the previous snapshot for durability.
|
||
|
||
When planning for memory requirements, you should typically allocate
|
||
enough RAM for your server agents to contain between 2 to 4 times the working
|
||
set size. You can determine the working set size by noting the value of
|
||
`consul.runtime.alloc_bytes` in the [Telemetry data](/docs/agent/telemetry).
|
||
|
||
> NOTE: Consul is not designed to serve as a general purpose database, and you
|
||
> should keep this in mind when choosing what data are populated to the
|
||
> key/value store.
|
||
|
||
## Read/Write Tuning
|
||
|
||
Consul is write limited by disk I/O and read limited by CPU. Memory requirements will be dependent on the total size of KV pairs stored and should be sized according to that data (as should the hard drive storage). The limit on a key’s value size is `512KB`.
|
||
|
||
-> Consul is write limited by disk I/O and read limited by CPU.
|
||
|
||
For **write-heavy** workloads, the total RAM available for overhead must approximately be equal to
|
||
|
||
RAM NEEDED = number of keys * average key size * 2-3x
|
||
|
||
Since writes must be synced to disk (persistent storage) on a quorum of servers before they are committed, deploying a disk with high write throughput (or an SSD) will enhance performance on the write side. ([Documentation](/docs/agent/options#_data_dir))
|
||
|
||
For a **read-heavy** workload, configure all Consul server agents with the `allow_stale` DNS option, or query the API with the `stale` [consistency mode](/api/features/consistency). By default, all queries made to the server are RPC forwarded to and serviced by the leader. By enabling stale reads, any server will respond to any query, thereby reducing overhead on the leader. Typically, the stale response is `100ms` or less from consistent mode but it drastically improves performance and reduces latency under high load.
|
||
|
||
If the leader server is out of memory or the disk is full, the server eventually stops responding, loses its election and cannot move past its last commit time. However, by configuring `max_stale` and setting it to a large value, Consul will continue to respond to queries during such outage scenarios. ([max_stale documentation](/docs/agent/options#max_stale)).
|
||
|
||
It should be noted that `stale` is not appropriate for coordination where strong consistency is important (i.e. locking or application leader election). For critical cases, the optional `consistent` API query mode is required for true linearizability; the trade off is that this turns a read into a full quorum write so requires more resources and takes longer.
|
||
|
||
**Read-heavy** clusters may take advantage of the [enhanced reading](/docs/enterprise/read-scale) feature (Enterprise) for better scalability. This feature allows additional servers to be introduced as non-voters. Being a non-voter, the server will still participate in data replication, but it will not block the leader from committing log entries.
|
||
|
||
Consul’s agents use network sockets for communicating with the other nodes (gossip) and with the server agent. In addition, file descriptors are also opened for watch handlers, health checks, and log files. For a **write heavy** cluster, the `ulimit` size must be increased from the default value (`1024`) to prevent the leader from running out of file descriptors.
|
||
|
||
To prevent any CPU spikes from a misconfigured client, RPC requests to the server should be [rate limited](/docs/agent/options#limits)
|
||
|
||
~> **NOTE** Rate limiting is configured on the client agent only.
|
||
|
||
In addition, two [performance indicators](/docs/agent/telemetry) — `consul.runtime.alloc_bytes` and `consul.runtime.heap_objects` — can help diagnose if the current sizing is not adequately meeting the load.
|
||
|
||
## Connect Certificate Signing CPU Limits
|
||
|
||
If you enable [Connect](/docs/connect), the leader server will need
|
||
to perform public key signing operations for every service instance in the
|
||
cluster. Typically these operations are fast on modern hardware, however when
|
||
the CA is changed or its key rotated, the leader will face an influx of
|
||
requests for new certificates for every service instance running.
|
||
|
||
While the client agents distribute these randomly over 30 seconds to avoid an
|
||
immediate thundering herd, they don't have enough information to tune that
|
||
period based on the number of certificates in use in the cluster so picking
|
||
longer smearing results in artificially slow rotations for small clusters.
|
||
|
||
Smearing requests over 30s is sufficient to bring RPC load to a reasonable level
|
||
in all but the very largest clusters, but the extra CPU load from cryptographic
|
||
operations could impact the server's normal work. To limit that, Consul since
|
||
1.4.1 exposes two ways to limit the impact Certificate signing has on the leader
|
||
[`csr_max_per_second`](/docs/agent/options#ca_csr_max_per_second) and
|
||
[`csr_max_concurrent`](/docs/agent/options#ca_csr_max_concurrent).
|
||
|
||
By default we set a limit of 50 per second which is reasonable on modest
|
||
hardware but may be too low and impact rotation times if more than 1500 service
|
||
instances are using Connect in the cluster. `csr_max_per_second` is likely best
|
||
if you have fewer than four cores available since a whole core being used by
|
||
signing is likely to impact the server stability if it's all or a large portion
|
||
of the cores available. The downside is that you need to capacity plan: how many
|
||
service instances will need Connect certificates? What CSR rate can your server
|
||
tolerate without impacting stability? How fast do you want CA rotations to
|
||
process?
|
||
|
||
For larger production deployments, we generally recommend multiple CPU cores for
|
||
servers to handle the normal workload. With four or more cores available, it's
|
||
simpler to limit signing CPU impact with `csr_max_concurrent` rather than tune
|
||
the rate limit. This effectively sets how many CPU cores can be monopolized by
|
||
certificate signing work (although it doesn't pin that work to specific cores).
|
||
In this case `csr_max_per_second` should be disabled (set to `0`).
|
||
|
||
For example if you have an 8 core server, setting `csr_max_concurrent` to `1`
|
||
would allow you to process CSRs as fast as a single core can (which is likely
|
||
sufficient for the very large clusters), without consuming all available
|
||
CPU cores and impacting normal server work or stability.
|