mirror of https://github.com/status-im/consul.git
1202 lines
57 KiB
Plaintext
1202 lines
57 KiB
Plaintext
---
|
||
layout: docs
|
||
page_title: ACL System (Legacy Mode)
|
||
description: >-
|
||
Consul provides an optional Access Control List (ACL) system which can be used
|
||
to control access to data and APIs. The ACL system is a Capability-based
|
||
system that relies on tokens which can have fine grained rules applied to
|
||
them. It is very similar to AWS IAM in many ways.
|
||
---
|
||
|
||
# ACL System in Legacy Mode
|
||
|
||
-> **1.3.0 and earlier:** This document only applies in Consul versions 1.3.0 and before. If you are using version 1.4.0 or later please use the updated documentation [here](/docs/acl/acl-system).
|
||
|
||
~> **Alert: Deprecation Notice**
|
||
The ACL system described here was Consul's original ACL implementation. In Consul 1.4.0
|
||
the ACL system was rewritten and the legacy system was deprecated. The new ACL system information can be found [here](/docs/acl/acl-system).
|
||
|
||
The legacy documentation has two sections.
|
||
|
||
- The [New ACL System Differences](#new-acl-system-differences) section
|
||
details the differences between ACLs in Consul 1.4.0 and older versions. You should read this section before upgrading to Consul 1.4.0 and [migrating](/docs/acl/acl-migrate-tokens) tokens.
|
||
- The [Legacy ACL System documentation](#legacy-acl-system) section details the
|
||
ACL system in Consul 1.3.0 and older.
|
||
|
||
# New ACL System Differences
|
||
|
||
The [ACL System documentation](/docs/acl/acl-system) and [legacy ACL
|
||
documentation](/docs/acl/acl-legacy) describes the new and old systems in
|
||
detail. Below is a summary of the changes that need to be considered when
|
||
migrating legacy tokens to the new system.
|
||
|
||
### Token and Policy Separation
|
||
|
||
You can use a single policy in the new system for all tokens that share access
|
||
rules. For example, all tokens created using the clone endpoint in the legacy
|
||
system can be represented with a single policy and a set of tokens that map to
|
||
that policy.
|
||
|
||
### Rule Syntax Changes
|
||
|
||
The most significant change is that rules with selectors _no longer prefix match
|
||
by default_. In the legacy system the following rules would grant access to
|
||
nodes, services and keys _prefixed_ with foo.
|
||
|
||
```hcl
|
||
node "foo" { policy = "write" }
|
||
service "foo" { policy = "write" }
|
||
key "foo" { policy = "write" }
|
||
```
|
||
|
||
In the new system the same syntax will only perform _exact_ match on the whole
|
||
node name, service name or key.
|
||
|
||
In general, exact match is what most operators intended most of the time so the
|
||
same policy can be kept, however if you rely on prefix match behavior then using
|
||
the same syntax will break behavior.
|
||
|
||
Prefix matching can be expressed in the new ACL system explicitly, making the
|
||
following rules in the new system exactly the same as the rules above in the
|
||
old.
|
||
|
||
```hcl
|
||
node_prefix "foo" { policy = "write" }
|
||
service_prefix "foo" { policy = "write" }
|
||
key_prefix "foo" { policy = "write" }
|
||
```
|
||
|
||
### API Separation
|
||
|
||
The "old" API endpoints below continue to work for backwards compatibility but
|
||
will continue to create or show only "legacy" tokens that can't take full
|
||
advantage of the new ACL system improvements. They are documented fully under
|
||
[Legacy Tokens](/api/acl/legacy).
|
||
|
||
- [`PUT /acl/create` - Create Legacy Token](/api/acl/legacy#create-acl-token)
|
||
- [`PUT /acl/update` - Update Legacy Token](/api/acl/legacy#update-acl-token)
|
||
- [`PUT /acl/destroy/:uuid` - Delete Legacy Token](/api/acl/legacy#delete-acl-token)
|
||
- [`GET /acl/info/:uuid` - Read Legacy Token](/api/acl/legacy#read-acl-token)
|
||
- [`PUT /acl/clone/:uuid` - Clone Legacy Token](/api/acl/legacy#clone-acl-token)
|
||
- [`GET /acl/list` - List Legacy Tokens](/api/acl/legacy#list-acls)
|
||
|
||
The new ACL system includes new API endpoints to manage
|
||
the [ACL System](/api/acl/acl), [Tokens](/api/acl/tokens)
|
||
and [Policies](/api/acl/policies).
|
||
|
||
# Legacy ACL System
|
||
|
||
~> **Warning**: In this document we use the deprecated
|
||
configuration parameter `acl_datacenter`. In Consul 1.4 and newer the
|
||
parameter has been updated to [`primary_datacenter`](/docs/agent/options#primary_datacenter).
|
||
|
||
Consul provides an optional Access Control List (ACL) system which can be used to control
|
||
access to data and APIs. The ACL is
|
||
[Capability-based](https://en.wikipedia.org/wiki/Capability-based_security), relying
|
||
on tokens to which fine grained rules can be applied. It is very similar to
|
||
[AWS IAM](http://aws.amazon.com/iam/) in many ways.
|
||
|
||
## ACL System Overview
|
||
|
||
The ACL system is designed to be easy to use, fast to enforce, and flexible to new policies,
|
||
all while providing administrative insight.
|
||
|
||
#### ACL Tokens
|
||
|
||
The ACL system is based on tokens, which are managed by Consul operators via Consul's
|
||
[ACL API](/api/acl/acl), or systems like
|
||
[HashiCorp's Vault](https://www.vaultproject.io/docs/secrets/consul).
|
||
|
||
Every token has an ID, name, type, and rule set. The ID is a randomly generated
|
||
UUID, making it infeasible to guess. The name is opaque to Consul and human readable.
|
||
The type is either "client" (meaning the token cannot modify ACL rules) or "management"
|
||
(meaning the token is allowed to perform all actions).
|
||
|
||
The token ID is passed along with each RPC request to the servers. Consul's
|
||
[HTTP endpoints](/api) can accept tokens via the `token`
|
||
query string parameter, or the `X-Consul-Token` request header, or Authorization Bearer
|
||
token [RFC6750](https://tools.ietf.org/html/rfc6750). Consul's
|
||
[CLI commands](/docs/commands) can accept tokens via the
|
||
`token` argument, or the `CONSUL_HTTP_TOKEN` environment variable.
|
||
|
||
If no token is provided, the rules associated with a special, configurable anonymous
|
||
token are automatically applied. The anonymous token is managed using the
|
||
[ACL API](/api/acl/acl) like any other ACL token, but using `anonymous` for the ID.
|
||
|
||
#### ACL Rules and Scope
|
||
|
||
Tokens are bound to a set of rules that control which Consul resources the token
|
||
has access to. Policies can be defined in either an allowlist or denylist mode
|
||
depending on the configuration of
|
||
[`acl_default_policy`](/docs/agent/options#acl_default_policy). If the default
|
||
policy is to "deny" all actions, then token rules can be set to allowlist specific
|
||
actions. In the inverse, the "allow" all default behavior is a denylist where rules
|
||
are used to prohibit actions. By default, Consul will allow all actions.
|
||
|
||
The following table summarizes the ACL policies that are available for constructing
|
||
rules:
|
||
|
||
| Policy | Scope |
|
||
| -------------------------------- | ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
|
||
| [`agent`](#agent-rules) | Utility operations in the [Agent API](/api/agent), other than service and check registration |
|
||
| [`event`](#event-rules) | Listing and firing events in the [Event API](/api/event) |
|
||
| [`key`](#key-value-rules) | Key/value store operations in the [KV Store API](/api/kv) |
|
||
| [`keyring`](#keyring-rules) | Keyring operations in the [Keyring API](/api/operator/keyring) |
|
||
| [`node`](#node-rules) | Node-level catalog operations in the [Catalog API](/api/catalog), [Health API](/api/health), [Prepared Query API](/api/query), [Network Coordinate API](/api/coordinate), and [Agent API](/api/agent) |
|
||
| [`operator`](#operator-rules) | Cluster-level operations in the [Operator API](/api/operator), other than the [Keyring API](/api/operator/keyring) |
|
||
| [`query`](#prepared-query-rules) | Prepared query operations in the [Prepared Query API](/api/query) |
|
||
| [`service`](#service-rules) | Service-level catalog operations in the [Catalog API](/api/catalog), [Health API](/api/health), [Prepared Query API](/api/query), and [Agent API](/api/agent) |
|
||
| [`session`](#session-rules) | Session operations in the [Session API](/api/session) |
|
||
|
||
Since Consul snapshots actually contain ACL tokens, the
|
||
[Snapshot API](/api/snapshot) requires a management token for snapshot operations
|
||
and does not use a special policy.
|
||
|
||
The following resources are not covered by ACL policies:
|
||
|
||
1. The [Status API](/api/status) is used by servers when bootstrapping and exposes
|
||
basic IP and port information about the servers, and does not allow modification
|
||
of any state.
|
||
|
||
2. The datacenter listing operation of the
|
||
[Catalog API](/api/catalog#list-datacenters) similarly exposes the names of known
|
||
Consul datacenters, and does not allow modification of any state.
|
||
|
||
Constructing rules from these policies is covered in detail in the
|
||
[Rule Specification](#rule-specification) section below.
|
||
|
||
#### ACL Datacenter
|
||
|
||
All nodes (clients and servers) must be configured with a
|
||
[`acl_datacenter`](/docs/agent/options#acl_datacenter) which enables ACL
|
||
enforcement but also specifies the authoritative datacenter. Consul relies on
|
||
[RPC forwarding](/docs/internals/architecture) to support multi-datacenter
|
||
configurations. However, because requests can be made across datacenter boundaries,
|
||
ACL tokens must be valid globally. To avoid consistency issues, a single datacenter
|
||
is considered authoritative and stores the canonical set of tokens.
|
||
|
||
When a request is made to an agent in a non-authoritative datacenter, it must be
|
||
resolved into the appropriate policy. This is done by reading the token from the
|
||
authoritative server and caching the result for a configurable
|
||
[`acl_ttl`](/docs/agent/options#acl_ttl). The implication of caching is that
|
||
the cache TTL is an upper bound on the staleness of policy that is enforced. It is
|
||
possible to set a zero TTL, but this has adverse performance impacts, as every
|
||
request requires refreshing the policy via an RPC call.
|
||
|
||
During an outage of the ACL datacenter, or loss of connectivity, the cache will be
|
||
used as long as the TTL is valid, or the cache may be extended if the
|
||
[`acl_down_policy`](/docs/agent/options#acl_down_policy) is set accordingly.
|
||
This configuration also allows the ACL system to fail open or closed.
|
||
[ACL replication](#replication) is also available to allow for the full set of ACL
|
||
tokens to be replicated for use during an outage.
|
||
|
||
## Configuring ACLs
|
||
|
||
ACLs are configured using several different configuration options. These are marked
|
||
as to whether they are set on servers, clients, or both.
|
||
|
||
| Configuration Option | Servers | Clients | Purpose |
|
||
| --------------------------------------------------------------------- | ---------- | ---------- | ----------------------------------------------------------------------------------------- |
|
||
| [`acl_datacenter`](/docs/agent/options#acl_datacenter) | `REQUIRED` | `REQUIRED` | Master control that enables ACLs by defining the authoritative Consul datacenter for ACLs |
|
||
| [`acl_default_policy`](/docs/agent/options#acl_default_policy_legacy) | `OPTIONAL` | `N/A` | Determines allowlist or denylist mode |
|
||
| [`acl_down_policy`](/docs/agent/options#acl_down_policy_legacy) | `OPTIONAL` | `OPTIONAL` | Determines what to do when the ACL datacenter is offline |
|
||
| [`acl_ttl`](/docs/agent/options#acl_ttl_legacy) | `OPTIONAL` | `OPTIONAL` | Determines time-to-live for cached ACLs |
|
||
|
||
There are some additional configuration items related to [ACL replication](#replication) and
|
||
[Version 8 ACL support](#version_8_acls). These are discussed in those respective sections
|
||
below.
|
||
|
||
A number of special tokens can also be configured which allow for bootstrapping the ACL
|
||
system, or accessing Consul in special situations:
|
||
|
||
| Special Token | Servers | Clients | Purpose |
|
||
| ----------------------------------------------------------------------------- | ---------- | ---------- | --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
|
||
| [`acl_agent_master_token`](/docs/agent/options#acl_agent_master_token_legacy) | `OPTIONAL` | `OPTIONAL` | Special token that can be used to access [Agent API](/api/agent) when the ACL datacenter isn't available, or servers are offline (for clients); used for setting up the cluster such as doing initial join operations, see the [ACL Agent Master Token](#acl-agent-master-token) section for more details |
|
||
| [`acl_agent_token`](/docs/agent/options#acl_agent_token_legacy) | `OPTIONAL` | `OPTIONAL` | Special token that is used for an agent's internal operations, see the [ACL Agent Token](#acl-agent-token) section for more details |
|
||
| [`acl_master_token`](/docs/agent/options#acl_master_token_legacy) | `REQUIRED` | `N/A` | Special token used to bootstrap the ACL system, see the [Bootstrapping ACLs](#bootstrapping-acls) section for more details |
|
||
| [`acl_token`](/docs/agent/options#acl_token_legacy) | `OPTIONAL` | `OPTIONAL` | Default token to use for client requests where no token is supplied; this is often configured with read-only access to services to enable DNS service discovery on agents |
|
||
|
||
In Consul 0.9.1 and later, the agent ACL tokens can be introduced or updated via the
|
||
[/v1/agent/token API](/api/agent#update-acl-tokens).
|
||
|
||
#### ACL Agent Master Token
|
||
|
||
Since the [`acl_agent_master_token`](/docs/agent/options#acl_agent_master_token_legacy) is designed to be used when the Consul servers are not available, its policy is managed locally on the agent and does not need to have a token defined on the Consul servers via the ACL API. Once set, it implicitly has the following policy associated with it (the `node` policy was added in Consul 0.9.0):
|
||
|
||
```hcl
|
||
agent "<node name of agent>" {
|
||
policy = "write"
|
||
}
|
||
node "" {
|
||
policy = "read"
|
||
}
|
||
```
|
||
|
||
In Consul 0.9.1 and later, the agent ACL tokens can be introduced or updated via the
|
||
[/v1/agent/token API](/api/agent#update-acl-tokens).
|
||
|
||
#### ACL Agent Token
|
||
|
||
The [`acl_agent_token`](/docs/agent/options#acl_agent_token) is a special token that is used for an agent's internal operations. It isn't used directly for any user-initiated operations like the [`acl_token`](/docs/agent/options#acl_token), though if the `acl_agent_token` isn't configured the `acl_token` will be used. The ACL agent token is used for the following operations by the agent:
|
||
|
||
1. Updating the agent's node entry using the [Catalog API](/api/catalog), including updating its node metadata, tagged addresses, and network coordinates
|
||
2. Performing [anti-entropy](/docs/internals/anti-entropy) syncing, in particular reading the node metadata and services registered with the catalog
|
||
3. Reading and writing the special `_rexec` section of the KV store when executing [`consul exec`](/commands/exec) commands
|
||
|
||
Here's an example policy sufficient to accomplish the above for a node called `mynode`:
|
||
|
||
```hcl
|
||
node "mynode" {
|
||
policy = "write"
|
||
}
|
||
service "" {
|
||
policy = "read"
|
||
}
|
||
key "_rexec" {
|
||
policy = "write"
|
||
}
|
||
```
|
||
|
||
The `service` policy needs `read` access for any services that can be registered on the agent. If [remote exec is disabled](/docs/agent/options#disable_remote_exec), the default, then the `key` policy can be omitted.
|
||
|
||
In Consul 0.9.1 and later, the agent ACL tokens can be introduced or updated via the
|
||
[/v1/agent/token API](/api/agent#update-acl-tokens).
|
||
|
||
## Bootstrapping ACLs
|
||
|
||
Bootstrapping ACLs on a new cluster requires a few steps, outlined in the examples in this
|
||
section.
|
||
|
||
#### Enable ACLs on the Consul Servers
|
||
|
||
The first step for bootstrapping ACLs is to enable ACLs on the Consul servers in the ACL
|
||
datacenter. In this example, we are configuring the following:
|
||
|
||
1. An ACL datacenter of "dc1", which is where these servers are
|
||
2. An ACL master token of "b1gs33cr3t"; see below for an alternative using the [/v1/acl/bootstrap API](/api/acl/acl#bootstrap-acls)
|
||
3. A default policy of "deny" which means we are in allowlist mode
|
||
4. A down policy of "extend-cache" which means that we will ignore token TTLs
|
||
during an outage
|
||
|
||
Here's the corresponding JSON configuration file:
|
||
|
||
```json
|
||
{
|
||
"acl_datacenter": "dc1",
|
||
"acl_master_token": "b1gs33cr3t",
|
||
"acl_default_policy": "deny",
|
||
"acl_down_policy": "extend-cache"
|
||
}
|
||
```
|
||
|
||
The servers will need to be restarted to load the new configuration. Please take care
|
||
to start the servers one at a time, and ensure each server has joined and is operating
|
||
correctly before starting another.
|
||
|
||
The [`acl_master_token`](/docs/agent/options#acl_master_token) will be created
|
||
as a "management" type token automatically. The
|
||
[`acl_master_token`](/docs/agent/options#acl_master_token) is only installed when
|
||
a server acquires cluster leadership. If you would like to install or change the
|
||
[`acl_master_token`](/docs/agent/options#acl_master_token), set the new value for
|
||
[`acl_master_token`](/docs/agent/options#acl_master_token) in the configuration
|
||
for all servers. Once this is done, restart the current leader to force a leader election.
|
||
|
||
In Consul 0.9.1 and later, you can use the [/v1/acl/bootstrap API](/api/acl/acl#bootstrap-acls)
|
||
to make the initial master token, so a token never needs to be placed into a configuration
|
||
file. To use this approach, omit `acl_master_token` from the above config and then call the API:
|
||
|
||
```shell-session
|
||
$ curl \
|
||
--request PUT \
|
||
http://127.0.0.1:8500/v1/acl/bootstrap
|
||
|
||
{"ID":"fe3b8d40-0ee0-8783-6cc2-ab1aa9bb16c1"}
|
||
```
|
||
|
||
The returned token is the initial management token, which is randomly generated by Consul.
|
||
It's only possible to bootstrap one time, and bootstrapping will be disabled if a master
|
||
token was configured and created.
|
||
|
||
Once the ACL system is bootstrapped, ACL tokens can be managed through the
|
||
[ACL API](/api/acl/acl).
|
||
|
||
#### Create an Agent Token
|
||
|
||
After the servers are restarted above, you will see new errors in the logs of the Consul
|
||
servers related to permission denied errors:
|
||
|
||
```text
|
||
2017/07/08 23:38:24 [WARN] agent: Node info update blocked by ACLs
|
||
2017/07/08 23:38:44 [WARN] agent: Coordinate update blocked by ACLs
|
||
```
|
||
|
||
These errors are because the agent doesn't yet have a properly configured
|
||
[`acl_agent_token`](/docs/agent/options#acl_agent_token) that it can use for its
|
||
own internal operations like updating its node information in the catalog and performing
|
||
[anti-entropy](/docs/internals/anti-entropy) syncing. We can create a token using the
|
||
ACL API, and the ACL master token we set in the previous step:
|
||
|
||
```shell-session
|
||
$ curl \
|
||
--request PUT \
|
||
--header "X-Consul-Token: b1gs33cr3t" \
|
||
--data \
|
||
'{
|
||
"Name": "Agent Token",
|
||
"Type": "client",
|
||
"Rules": "node \"\" { policy = \"write\" } service \"\" { policy = \"read\" }"
|
||
}' http://127.0.0.1:8500/v1/acl/create
|
||
|
||
{"ID":"fe3b8d40-0ee0-8783-6cc2-ab1aa9bb16c1"}
|
||
```
|
||
|
||
The returned value is the newly-created token. We can now add this to our Consul server
|
||
configuration and restart the servers once more to apply it:
|
||
|
||
```json
|
||
{
|
||
"acl_datacenter": "dc1",
|
||
"acl_master_token": "b1gs33cr3t",
|
||
"acl_default_policy": "deny",
|
||
"acl_down_policy": "extend-cache",
|
||
"acl_agent_token": "fe3b8d40-0ee0-8783-6cc2-ab1aa9bb16c1"
|
||
}
|
||
```
|
||
|
||
In Consul 0.9.1 and later you can also introduce the agent token using an API,
|
||
so it doesn't need to be set in the configuration file:
|
||
|
||
```shell-session
|
||
$ curl \
|
||
--request PUT \
|
||
--header "X-Consul-Token: b1gs33cr3t" \
|
||
--data \
|
||
'{
|
||
"Token": "fe3b8d40-0ee0-8783-6cc2-ab1aa9bb16c1"
|
||
}' http://127.0.0.1:8500/v1/agent/token/acl_agent_token
|
||
```
|
||
|
||
With that ACL agent token set, the servers will be able to sync themselves with the
|
||
catalog:
|
||
|
||
```text
|
||
2017/07/08 23:42:59 [INFO] agent: Synced node info
|
||
```
|
||
|
||
See the [ACL Agent Token](#acl-agent-token) section for more details.
|
||
|
||
#### Enable ACLs on the Consul Clients
|
||
|
||
Since ACL enforcement also occurs on the Consul clients, we need to also restart them
|
||
with a configuration file that enables ACLs:
|
||
|
||
```json
|
||
{
|
||
"acl_datacenter": "dc1",
|
||
"acl_down_policy": "extend-cache",
|
||
"acl_agent_token": "fe3b8d40-0ee0-8783-6cc2-ab1aa9bb16c1"
|
||
}
|
||
```
|
||
|
||
Similar to the previous example, in Consul 0.9.1 and later you can also introduce the
|
||
agent token using an API, so it doesn't need to be set in the configuration file:
|
||
|
||
```shell-session
|
||
$ curl \
|
||
--request PUT \
|
||
--header "X-Consul-Token: b1gs33cr3t" \
|
||
--data \
|
||
'{
|
||
"Token": "fe3b8d40-0ee0-8783-6cc2-ab1aa9bb16c1"
|
||
}' http://127.0.0.1:8500/v1/agent/token/acl_agent_token
|
||
```
|
||
|
||
We used the same ACL agent token that we created for the servers, which will work since
|
||
it was not specific to any node or set of service prefixes. In a more locked-down
|
||
environment it is recommended that each client get an ACL agent token with `node` write
|
||
privileges for just its own node name prefix, and `service` read privileges for just the
|
||
service prefixes expected to be registered on that client.
|
||
|
||
[Anti-entropy](/docs/internals/anti-entropy) syncing requires the ACL agent token
|
||
to have `service` read privileges for all services that may be registered with the agent,
|
||
so generally an empty `service` prefix can be used, as shown in the example.
|
||
|
||
Clients will report similar permission denied errors until they are restarted with an ACL
|
||
agent token.
|
||
|
||
#### Set an Anonymous Policy (Optional)
|
||
|
||
At this point ACLs are bootstrapped with ACL agent tokens configured, but there are no
|
||
other policies set up. Even basic operations like `consul members` will be restricted
|
||
by the ACL default policy of "deny":
|
||
|
||
```shell-session
|
||
$ consul members
|
||
```
|
||
|
||
We don't get an error since the ACL has filtered what we see, and we aren't allowed to
|
||
see any nodes by default.
|
||
|
||
If we supply the token we created above we will be able to see a listing of nodes because
|
||
it has write privileges to an empty `node` prefix, meaning it has access to all nodes:
|
||
|
||
```shell-session
|
||
$ CONSUL_HTTP_TOKEN=fe3b8d40-0ee0-8783-6cc2-ab1aa9bb16c1 consul members
|
||
Node Address Status Type Build Protocol DC
|
||
node-1 127.0.0.1:8301 alive server 0.9.0dev 2 dc1
|
||
node-2 127.0.0.2:8301 alive client 0.9.0dev 2 dc1
|
||
```
|
||
|
||
It's pretty common in many environments to allow listing of all nodes, even without a
|
||
token. The policies associated with the special anonymous token can be updated to
|
||
configure Consul's behavior when no token is supplied. The anonymous token is managed
|
||
like any other ACL token, except that `anonymous` is used for the ID. In this example
|
||
we will give the anonymous token read privileges for all nodes:
|
||
|
||
```shell-session
|
||
$ curl \
|
||
--request PUT \
|
||
--header "X-Consul-Token: b1gs33cr3t" \
|
||
--data \
|
||
'{
|
||
"ID": "anonymous",
|
||
"Type": "client",
|
||
"Rules": "node \"\" { policy = \"read\" }"
|
||
}' http://127.0.0.1:8500/v1/acl/update
|
||
|
||
{"ID":"anonymous"}
|
||
```
|
||
|
||
The anonymous token is implicitly used if no token is supplied, so now we can run
|
||
`consul members` without supplying a token and we will be able to see the nodes:
|
||
|
||
```shell-session
|
||
$ consul members
|
||
Node Address Status Type Build Protocol DC
|
||
node-1 127.0.0.1:8301 alive server 0.9.0dev 2 dc1
|
||
node-2 127.0.0.2:8301 alive client 0.9.0dev 2 dc1
|
||
```
|
||
|
||
The anonymous token is also used for DNS lookups since there's no way to pass a
|
||
token as part of a DNS request. Here's an example lookup for the "consul" service:
|
||
|
||
```shell-session
|
||
$ dig @127.0.0.1 -p 8600 consul.service.consul
|
||
|
||
; <<>> DiG 9.8.3-P1 <<>> @127.0.0.1 -p 8600 consul.service.consul
|
||
; (1 server found)
|
||
;; global options: +cmd
|
||
;; Got answer:
|
||
;; ->>HEADER<<- opcode: QUERY, status: NXDOMAIN, id: 9648
|
||
;; flags: qr aa rd; QUERY: 1, ANSWER: 0, AUTHORITY: 1, ADDITIONAL: 0
|
||
;; WARNING: recursion requested but not available
|
||
|
||
;; QUESTION SECTION:
|
||
;consul.service.consul. IN A
|
||
|
||
;; AUTHORITY SECTION:
|
||
consul. 0 IN SOA ns.consul. postmaster.consul. 1499584110 3600 600 86400 0
|
||
|
||
;; Query time: 2 msec
|
||
;; SERVER: 127.0.0.1#8600(127.0.0.1)
|
||
;; WHEN: Sun Jul 9 00:08:30 2017
|
||
;; MSG SIZE rcvd: 89
|
||
```
|
||
|
||
Now we get an `NXDOMAIN` error because the anonymous token doesn't have access to the
|
||
"consul" service. Let's add that to the anonymous token's policy:
|
||
|
||
```shell-session
|
||
$ curl \
|
||
--request PUT \
|
||
--header "X-Consul-Token: b1gs33cr3t" \
|
||
--data \
|
||
'{
|
||
"ID": "anonymous",
|
||
"Type": "client",
|
||
"Rules": "node \"\" { policy = \"read\" } service \"consul\" { policy = \"read\" }"
|
||
}' http://127.0.0.1:8500/v1/acl/update
|
||
|
||
{"ID":"anonymous"}
|
||
```
|
||
|
||
With that new policy in place, the DNS lookup will succeed:
|
||
|
||
```shell-session
|
||
$ dig @127.0.0.1 -p 8600 consul.service.consul
|
||
|
||
; <<>> DiG 9.8.3-P1 <<>> @127.0.0.1 -p 8600 consul.service.consul
|
||
; (1 server found)
|
||
;; global options: +cmd
|
||
;; Got answer:
|
||
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 46006
|
||
;; flags: qr aa rd; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0
|
||
;; WARNING: recursion requested but not available
|
||
|
||
;; QUESTION SECTION:
|
||
;consul.service.consul. IN A
|
||
|
||
;; ANSWER SECTION:
|
||
consul.service.consul. 0 IN A 127.0.0.1
|
||
|
||
;; Query time: 0 msec
|
||
;; SERVER: 127.0.0.1#8600(127.0.0.1)
|
||
;; WHEN: Sun Jul 9 00:11:14 2017
|
||
;; MSG SIZE rcvd: 55
|
||
```
|
||
|
||
The next section shows an alternative to the anonymous token.
|
||
|
||
#### Set Agent-Specific Default Tokens (Optional)
|
||
|
||
An alternative to the anonymous token is the [`acl_token`](/docs/agent/options#acl_token)
|
||
configuration item. When a request is made to a particular Consul agent and no token is
|
||
supplied, the [`acl_token`](/docs/agent/options#acl_token) will be used for the token,
|
||
instead of being left empty which would normally invoke the anonymous token.
|
||
|
||
In Consul 0.9.1 and later, the agent ACL tokens can be introduced or updated via the
|
||
[/v1/agent/token API](/api/agent#update-acl-tokens).
|
||
|
||
This behaves very similarly to the anonymous token, but can be configured differently on each
|
||
agent, if desired. For example, this allows more fine grained control of what DNS requests a
|
||
given agent can service, or can give the agent read access to some key-value store prefixes by
|
||
default.
|
||
|
||
If using [`acl_token`](/docs/agent/options#acl_token), then it's likely the anonymous
|
||
token will have a more restrictive policy than shown in the examples here.
|
||
|
||
#### Create Tokens for UI Use (Optional)
|
||
|
||
If you utilize the Consul UI with a restrictive ACL policy, as above, the UI will
|
||
not function fully using the anonymous ACL token. It is recommended
|
||
that a UI-specific ACL token is used, which can be set in the UI during the
|
||
web browser session to authenticate the interface.
|
||
|
||
```shell-session
|
||
$ curl \
|
||
--request PUT \
|
||
--header "X-Consul-Token: b1gs33cr3t" \
|
||
--data \
|
||
'{
|
||
"Name": "UI Token",
|
||
"Type": "client",
|
||
"Rules": "key \"\" { policy = \"write\" } node \"\" { policy = \"read\" } service \"\" { policy = \"read\" }"
|
||
}' http://127.0.0.1:8500/v1/acl/create
|
||
{"ID":"d0a9f330-2f9d-0a8c-d2af-1e9ceda354e6"}
|
||
```
|
||
|
||
The token can then be set on the "settings" page of the UI.
|
||
|
||
#### Next Steps
|
||
|
||
The examples above configure a basic ACL environment with the ability to see all nodes
|
||
by default, and limited access to just the "consul" service. The [ACL API](/api/acl/acl)
|
||
can be used to create tokens for applications specific to their intended use, and to create
|
||
more specific ACL agent tokens for each agent's expected role.
|
||
|
||
Also see [HashiCorp's Vault](https://www.vaultproject.io/docs/secrets/consul), which
|
||
has an integration with Consul that allows it to generate ACL tokens on the fly and to manage
|
||
their lifetimes.
|
||
|
||
## Rule Specification
|
||
|
||
A core part of the ACL system is the rule language which is used to describe the policy
|
||
that must be enforced. Most of the ACL rules are prefix-based, allowing operators to
|
||
define different namespaces within Consul's resource areas like the catalog and key/value
|
||
store, in order to delegate responsibility for these namespaces. Policies can have several
|
||
dispositions:
|
||
|
||
- `read`: allow the resource to be read but not modified
|
||
- `write`: allow the resource to be read and modified
|
||
- `deny`: do not allow the resource to be read or modified
|
||
|
||
With prefix-based rules, the most specific prefix match determines the action. This
|
||
allows for flexible rules like an empty prefix to allow read-only access to all
|
||
resources, along with some specific prefixes that allow write access or that are
|
||
denied all access.
|
||
|
||
We make use of the
|
||
[HashiCorp Configuration Language (HCL)](https://github.com/hashicorp/hcl/) to specify
|
||
rules. This language is human readable and interoperable with JSON making it easy to
|
||
machine-generate. Rules can make use of one or more policies.
|
||
|
||
Specification in the HCL format looks like:
|
||
|
||
```hcl
|
||
# These control access to the key/value store.
|
||
key "" {
|
||
policy = "read"
|
||
}
|
||
key "foo/" {
|
||
policy = "write"
|
||
}
|
||
key "foo/private/" {
|
||
policy = "deny"
|
||
}
|
||
|
||
# This controls access to cluster-wide Consul operator information.
|
||
operator = "read"
|
||
```
|
||
|
||
This is equivalent to the following JSON input:
|
||
|
||
```javascript
|
||
{
|
||
"key": {
|
||
"": {
|
||
"policy": "read"
|
||
},
|
||
"foo/": {
|
||
"policy": "write"
|
||
},
|
||
"foo/private/": {
|
||
"policy": "deny"
|
||
}
|
||
},
|
||
"operator": "read"
|
||
}
|
||
```
|
||
|
||
The [ACL API](/api/acl/acl) allows either HCL or JSON to be used to define the content
|
||
of the rules section.
|
||
|
||
Here's a sample request using the HCL form:
|
||
|
||
```shell-session
|
||
$ curl \
|
||
--request PUT \
|
||
--data \
|
||
'{
|
||
"Name": "my-app-token",
|
||
"Type": "client",
|
||
"Rules": "key \"\" { policy = \"read\" } key \"foo/\" { policy = \"write\" } key \"foo/private/\" { policy = \"deny\" } operator = \"read\""
|
||
}' http://127.0.0.1:8500/v1/acl/create?token=<management token>
|
||
```
|
||
|
||
Here's an equivalent request using the JSON form:
|
||
|
||
```shell-session
|
||
$ curl \
|
||
--request PUT \
|
||
--data \
|
||
'{
|
||
"Name": "my-app-token",
|
||
"Type": "client",
|
||
"Rules": "{\"key\":{\"\":{\"policy\":\"read\"},\"foo/\":{\"policy\":\"write\"},\"foo/private\":{\"policy\":\"deny\"}},\"operator\":\"read\"}"
|
||
}' http://127.0.0.1:8500/v1/acl/create?token=<management token>
|
||
```
|
||
|
||
On success, the token ID is returned:
|
||
|
||
```json
|
||
{
|
||
"ID": "adf4238a-882b-9ddc-4a9d-5b6758e4159e"
|
||
}
|
||
```
|
||
|
||
This token ID can then be passed into Consul's HTTP APIs via the `token`
|
||
query string parameter, or the `X-Consul-Token` request header, or Authorization
|
||
Bearer token header, or Consul's CLI commands via the `token` argument,
|
||
or the `CONSUL_HTTP_TOKEN` environment variable.
|
||
|
||
#### Agent Rules
|
||
|
||
The `agent` policy controls access to the utility operations in the [Agent API](/api/agent),
|
||
such as join and leave. All of the catalog-related operations are covered by the [`node`](#node-rules)
|
||
and [`service`](#service-rules) policies instead.
|
||
|
||
Agent rules look like this:
|
||
|
||
```hcl
|
||
agent "" {
|
||
policy = "read"
|
||
}
|
||
agent "foo" {
|
||
policy = "write"
|
||
}
|
||
agent "bar" {
|
||
policy = "deny"
|
||
}
|
||
```
|
||
|
||
Agent rules are keyed by the node name prefix they apply to, using the longest prefix match rule. In
|
||
the example above, the rules allow read-only access to any node name with the empty prefix, allow
|
||
read-write access to any node name that starts with "foo", and deny all access to any node name that
|
||
starts with "bar".
|
||
|
||
Since [Agent API](/api/agent) utility operations may be required before an agent is joined to
|
||
a cluster, or during an outage of the Consul servers or ACL datacenter, a special token may be
|
||
configured with [`acl_agent_master_token`](/docs/agent/options#acl_agent_master_token) to allow
|
||
write access to these operations even if no ACL resolution capability is available.
|
||
|
||
#### Event Rules
|
||
|
||
The `event` policy controls access to event operations in the [Event API](/api/event), such as
|
||
firing events and listing events.
|
||
|
||
Event rules look like this:
|
||
|
||
```hcl
|
||
event "" {
|
||
policy = "read"
|
||
}
|
||
event "deploy" {
|
||
policy = "write"
|
||
}
|
||
```
|
||
|
||
Event rules are keyed by the event name prefix they apply to, using the longest prefix match rule.
|
||
In the example above, the rules allow read-only access to any event, and firing of any event that
|
||
starts with "deploy".
|
||
|
||
The [`consul exec`](/commands/exec) command uses events with the "\_rexec" prefix during
|
||
operation, so to enable this feature in a Consul environment with ACLs enabled, you will need to
|
||
give agents a token with access to this event prefix, in addition to configuring
|
||
[`disable_remote_exec`](/docs/agent/options#disable_remote_exec) to `false`.
|
||
|
||
#### Key/Value Rules
|
||
|
||
The `key` policy controls access to key/value store operations in the [KV API](/api/kv). Key
|
||
rules look like this:
|
||
|
||
```hcl
|
||
key "" {
|
||
policy = "read"
|
||
}
|
||
key "foo" {
|
||
policy = "write"
|
||
}
|
||
key "bar" {
|
||
policy = "deny"
|
||
}
|
||
```
|
||
|
||
Key rules are keyed by the key name prefix they apply to, using the longest prefix match rule. In
|
||
the example above, the rules allow read-only access to any key name with the empty prefix, allow
|
||
read-write access to any key name that starts with "foo", and deny all access to any key name that
|
||
starts with "bar".
|
||
|
||
#### List Policy for Keys
|
||
|
||
Consul 1.0 introduces a new `list` policy for keys that is only enforced when opted in via the boolean config param "acl_enable_key_list_policy".
|
||
`list` controls access to recursively list entries and keys, and enables more fine grained policies. With "acl_enable_key_list_policy",
|
||
recursive reads via [the KV API](/api/kv#recurse) with an invalid token result in a 403. Example:
|
||
|
||
```hcl
|
||
key "" {
|
||
policy = "deny"
|
||
}
|
||
|
||
key "bar" {
|
||
policy = "list"
|
||
}
|
||
|
||
key "baz" {
|
||
policy = "read"
|
||
}
|
||
```
|
||
|
||
In the example above, the rules allow reading the key "baz", and only allow recursive reads on the prefix "bar".
|
||
|
||
A token with `write` access on a prefix also has `list` access. A token with `list` access on a prefix also has `read` access on all its suffixes.
|
||
|
||
#### Sentinel Integration <EnterpriseAlert inline />
|
||
|
||
Consul Enterprise supports additional optional fields for key write policies for
|
||
[Sentinel](https://docs.hashicorp.com/sentinel/consul/) integration. An example key rule with a
|
||
Sentinel code policy looks like this:
|
||
|
||
```hcl
|
||
key "foo" {
|
||
policy = "write"
|
||
sentinel {
|
||
code = <<EOF
|
||
import "strings"
|
||
main = rule { strings.has_suffix(value, "bar") }
|
||
EOF
|
||
enforcementlevel = "hard-mandatory"
|
||
}
|
||
}
|
||
```
|
||
|
||
For more detailed information, see the [Consul Sentinel documentation](/docs/agent/sentinel).
|
||
|
||
#### Keyring Rules
|
||
|
||
The `keyring` policy controls access to keyring operations in the
|
||
[Keyring API](/api/operator/keyring).
|
||
|
||
Keyring rules look like this:
|
||
|
||
```text
|
||
keyring = "write"
|
||
```
|
||
|
||
There's only one keyring policy allowed per rule set, and its value is set to one of the policy
|
||
dispositions. In the example above, the keyring may be read and updated.
|
||
|
||
#### Node Rules
|
||
|
||
The `node` policy controls node-level registration and read access to the [Catalog API](/api/catalog),
|
||
service discovery with the [Health API](/api/health), and filters results in [Agent API](/api/agent)
|
||
operations like fetching the list of cluster members.
|
||
|
||
Node rules look like this:
|
||
|
||
```hcl
|
||
node "" {
|
||
policy = "read"
|
||
}
|
||
node "app" {
|
||
policy = "write"
|
||
}
|
||
node "admin" {
|
||
policy = "deny"
|
||
}
|
||
```
|
||
|
||
Node rules are keyed by the node name prefix they apply to, using the longest prefix match rule. In
|
||
the example above, the rules allow read-only access to any node name with the empty prefix, allow
|
||
read-write access to any node name that starts with "app", and deny all access to any node name that
|
||
starts with "admin".
|
||
|
||
Agents need to be configured with an [`acl_agent_token`](/docs/agent/options#acl_agent_token)
|
||
with at least "write" privileges to their own node name in order to register their information with
|
||
the catalog, such as node metadata and tagged addresses. If this is configured incorrectly, the agent
|
||
will print an error to the console when it tries to sync its state with the catalog.
|
||
|
||
Consul's DNS interface is also affected by restrictions on node rules. If the
|
||
[`acl_token`](/docs/agent/options#acl_token) used by the agent does not have "read" access to a
|
||
given node, then the DNS interface will return no records when queried for it.
|
||
|
||
When reading from the catalog or retrieving information from the health endpoints, node rules are
|
||
used to filter the results of the query. This allows for configurations where a token has access
|
||
to a given service name, but only on an allowed subset of node names.
|
||
|
||
Node rules come into play when using the [Agent API](/api/agent) to register node-level
|
||
checks. The agent will check tokens locally as a check is registered, and Consul also performs
|
||
periodic [anti-entropy](/docs/internals/anti-entropy) syncs, which may require an
|
||
ACL token to complete. To accommodate this, Consul provides two methods of configuring ACL tokens
|
||
to use for registration events:
|
||
|
||
1. Using the [acl_token](/docs/agent/options#acl_token) configuration
|
||
directive. This allows a single token to be configured globally and used
|
||
during all check registration operations.
|
||
2. Providing an ACL token with service and check definitions at
|
||
registration time. This allows for greater flexibility and enables the use
|
||
of multiple tokens on the same agent. Examples of what this looks like are
|
||
available for both [services](/docs/agent/services) and
|
||
[checks](/docs/agent/checks). Tokens may also be passed to the
|
||
[HTTP API](/api) for operations that require them.
|
||
|
||
In addition to ACLs, in Consul 0.9.0 and later, the agent must be configured with
|
||
[`enable_script_checks`](/docs/agent/options#_enable_script_checks) set to `true` in order to enable
|
||
script checks.
|
||
|
||
#### Operator Rules
|
||
|
||
The `operator` policy controls access to cluster-level operations in the
|
||
[Operator API](/api/operator), other than the [Keyring API](/api/operator/keyring).
|
||
|
||
Operator rules look like this:
|
||
|
||
```text
|
||
operator = "read"
|
||
```
|
||
|
||
There's only one operator policy allowed per rule set, and its value is set to one of the policy
|
||
dispositions. In the example above, the token could be used to query the operator endpoints for
|
||
diagnostic purposes but not make any changes.
|
||
|
||
#### Prepared Query Rules
|
||
|
||
The `query` policy controls access to create, update, and delete prepared queries in the
|
||
[Prepared Query API](/api/query). Executing queries is subject to `node` and `service`
|
||
policies, as will be explained below.
|
||
|
||
Query rules look like this:
|
||
|
||
```hcl
|
||
query "" {
|
||
policy = "read"
|
||
}
|
||
query "foo" {
|
||
policy = "write"
|
||
}
|
||
```
|
||
|
||
Query rules are keyed by the query name prefix they apply to, using the longest prefix match rule. In
|
||
the example above, the rules allow read-only access to any query name with the empty prefix, and allow
|
||
read-write access to any query name that starts with "foo". This allows control of the query namespace
|
||
to be delegated based on ACLs.
|
||
|
||
There are a few variations when using ACLs with prepared queries, each of which uses ACLs in one of two
|
||
ways: open, protected by unguessable IDs or closed, managed by ACL policies. These variations are covered
|
||
here, with examples:
|
||
|
||
- Static queries with no `Name` defined are not controlled by any ACL policies.
|
||
These types of queries are meant to be ephemeral and not shared to untrusted
|
||
clients, and they are only reachable if the prepared query ID is known. Since
|
||
these IDs are generated using the same random ID scheme as ACL Tokens, it is
|
||
infeasible to guess them. When listing all prepared queries, only a management
|
||
token will be able to see these types, though clients can read instances for
|
||
which they have an ID. An example use for this type is a query built by a
|
||
startup script, tied to a session, and written to a configuration file for a
|
||
process to use via DNS.
|
||
|
||
- Static queries with a `Name` defined are controlled by the `query` ACL policy.
|
||
Clients are required to have an ACL token with a prefix sufficient to cover
|
||
the name they are trying to manage, with a longest prefix match providing a
|
||
way to define more specific policies. Clients can list or read queries for
|
||
which they have "read" access based on their prefix, and similar they can
|
||
update any queries for which they have "write" access. An example use for
|
||
this type is a query with a well-known name (eg. `prod-primary-customer-db`)
|
||
that is used and known by many clients to provide geo-failover behavior for
|
||
a database.
|
||
|
||
- [Template queries](/api/query#prepared-query-templates)
|
||
queries work like static queries with a `Name` defined, except that a catch-all
|
||
template with an empty `Name` requires an ACL token that can write to any query
|
||
prefix.
|
||
|
||
When prepared queries are executed via DNS lookups or HTTP requests, the ACL
|
||
checks are run against the service being queried, similar to how ACLs work with
|
||
other service lookups. There are several ways the ACL token is selected for this
|
||
check:
|
||
|
||
- If an ACL Token was captured when the prepared query was defined, it will be
|
||
used to perform the service lookup. This allows queries to be executed by
|
||
clients with lesser or even no ACL Token, so this should be used with care.
|
||
|
||
- If no ACL Token was captured, then the client's ACL Token will be used to
|
||
perform the service lookup.
|
||
|
||
- If no ACL Token was captured and the client has no ACL Token, then the
|
||
anonymous token will be used to perform the service lookup.
|
||
|
||
In the common case, the ACL Token of the invoker is used
|
||
to test the ability to look up a service. If a `Token` was specified when the
|
||
prepared query was created, the behavior changes and now the captured
|
||
ACL Token set by the definer of the query is used when looking up a service.
|
||
|
||
Capturing ACL Tokens is analogous to
|
||
[PostgreSQL’s](http://www.postgresql.org/docs/current/static/sql-createfunction.html)
|
||
`SECURITY DEFINER` attribute which can be set on functions, and using the client's ACL
|
||
Token is similar to the complementary `SECURITY INVOKER` attribute.
|
||
|
||
Prepared queries were originally introduced in Consul 0.6.0, and ACL behavior remained
|
||
unchanged through version 0.6.3, but was then changed to allow better management of the
|
||
prepared query namespace.
|
||
|
||
These differences are outlined in the table below:
|
||
|
||
| Operation | Version <= 0.6.3 | Version > 0.6.3 |
|
||
| ---------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ | ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
|
||
| Create static query without `Name` | The ACL Token used to create the prepared query is checked to make sure it can access the service being queried. This token is captured as the `Token` to use when executing the prepared query. | No ACL policies are used as long as no `Name` is defined. No `Token` is captured by default unless specifically supplied by the client when creating the query. |
|
||
| Create static query with `Name` | The ACL Token used to create the prepared query is checked to make sure it can access the service being queried. This token is captured as the `Token` to use when executing the prepared query. | The client token's `query` ACL policy is used to determine if the client is allowed to register a query for the given `Name`. No `Token` is captured by default unless specifically supplied by the client when creating the query. |
|
||
| Manage static query without `Name` | The ACL Token used to create the query, or a management token must be supplied in order to perform these operations. | Any client with the ID of the query can perform these operations. |
|
||
| Manage static query with a `Name` | The ACL token used to create the query, or a management token must be supplied in order to perform these operations. | Similar to create, the client token's `query` ACL policy is used to determine if these operations are allowed. |
|
||
| List queries | A management token is required to list any queries. | The client token's `query` ACL policy is used to determine which queries they can see. Only management tokens can see prepared queries without `Name`. |
|
||
| Execute query | Since a `Token` is always captured when a query is created, that is used to check access to the service being queried. Any token supplied by the client is ignored. | The captured token, client's token, or anonymous token is used to filter the results, as described above. |
|
||
|
||
#### Service Rules
|
||
|
||
The `service` policy controls service-level registration and read access to the [Catalog API](/api/catalog)
|
||
and service discovery with the [Health API](/api/health).
|
||
|
||
Service rules look like this:
|
||
|
||
```hcl
|
||
service "" {
|
||
policy = "read"
|
||
}
|
||
service "app" {
|
||
policy = "write"
|
||
}
|
||
service "admin" {
|
||
policy = "deny"
|
||
}
|
||
```
|
||
|
||
Service rules are keyed by the service name prefix they apply to, using the longest prefix match rule. In
|
||
the example above, the rules allow read-only access to any service name with the empty prefix, allow
|
||
read-write access to any service name that starts with "app", and deny all access to any service name that
|
||
starts with "admin".
|
||
|
||
Consul's DNS interface is affected by restrictions on service rules. If the
|
||
[`acl_token`](/docs/agent/options#acl_token) used by the agent does not have "read" access to a
|
||
given service, then the DNS interface will return no records when queried for it.
|
||
|
||
When reading from the catalog or retrieving information from the health endpoints, service rules are
|
||
used to filter the results of the query.
|
||
|
||
Service rules come into play when using the [Agent API](/api/agent) to register services or
|
||
checks. The agent will check tokens locally as a service or check is registered, and Consul also
|
||
performs periodic [anti-entropy](/docs/internals/anti-entropy) syncs, which may require an
|
||
ACL token to complete. To accommodate this, Consul provides two methods of configuring ACL tokens
|
||
to use for registration events:
|
||
|
||
1. Using the [acl_token](/docs/agent/options#acl_token) configuration
|
||
directive. This allows a single token to be configured globally and used
|
||
during all service and check registration operations.
|
||
2. Providing an ACL token with service and check definitions at registration
|
||
time. This allows for greater flexibility and enables the use of multiple
|
||
tokens on the same agent. Examples of what this looks like are available for
|
||
both [services](/docs/agent/services) and
|
||
[checks](/docs/agent/checks). Tokens may also be passed to the [HTTP
|
||
API](/api) for operations that require them. **Note:** all tokens
|
||
passed to an agent are persisted on local disk to allow recovery from
|
||
restarts. See [`-data-dir` flag
|
||
documentation](/docs/agent/options#acl_token) for notes on securing
|
||
access.
|
||
|
||
In addition to ACLs, in Consul 0.9.0 and later, the agent must be configured with
|
||
[`enable_script_checks`](/docs/agent/options#_enable_script_checks) or
|
||
[`enable_local_script_checks`](/docs/agent/options#_enable_local_script_checks)
|
||
set to `true` in order to enable script checks.
|
||
|
||
#### Session Rules
|
||
|
||
The `session` policy controls access to [Session API](/api/session) operations.
|
||
|
||
Session rules look like this:
|
||
|
||
```hcl
|
||
session "" {
|
||
policy = "read"
|
||
}
|
||
session "app" {
|
||
policy = "write"
|
||
}
|
||
session "admin" {
|
||
policy = "deny"
|
||
}
|
||
```
|
||
|
||
Session rules are keyed by the node name prefix they apply to, using the longest prefix match rule. In
|
||
the example above, the rules allow read-only access to sessions on node name with the empty prefix, allow
|
||
creating sessions on any node name that starts with "app", and deny all access to any sessions on a node
|
||
name that starts with "admin".
|
||
|
||
## Advanced Topics
|
||
|
||
#### Outages and ACL Replication ((#replication))
|
||
|
||
The Consul ACL system is designed with flexible rules to accommodate for an outage
|
||
of the [`acl_datacenter`](/docs/agent/options#acl_datacenter) or networking
|
||
issues preventing access to it. In this case, it may be impossible for
|
||
agents in non-authoritative datacenters to resolve tokens. Consul provides
|
||
a number of configurable [`acl_down_policy`](/docs/agent/options#acl_down_policy)
|
||
choices to tune behavior. It is possible to deny or permit all actions or to ignore
|
||
cache TTLs and enter a fail-safe mode. The default is to ignore cache TTLs
|
||
for any previously resolved tokens and to deny any uncached tokens.
|
||
|
||
Consul 0.7 added an ACL Replication capability that can allow non-authoritative
|
||
datacenter agents to resolve even uncached tokens. This is enabled by setting an
|
||
[`acl_replication_token`](/docs/agent/options#acl_replication_token) in the
|
||
configuration on the servers in the non-authoritative datacenters. In Consul
|
||
0.9.1 and later you can enable ACL replication using
|
||
[`enable_acl_replication`](/docs/agent/options#enable_acl_replication) and
|
||
then set the token later using the
|
||
[agent token API](/api/agent#update-acl-tokens) on each server. This can
|
||
also be used to rotate the token without restarting the Consul servers.
|
||
|
||
With replication enabled, the servers will maintain a replica of the authoritative
|
||
datacenter's full set of ACLs on the non-authoritative servers. The ACL replication
|
||
token needs to be a valid ACL token with management privileges, it can also be the
|
||
same as the master ACL token.
|
||
|
||
Replication occurs with a background process that looks for new ACLs approximately
|
||
every 30 seconds. Replicated changes are written at a rate that's throttled to
|
||
100 updates/second, so it may take several minutes to perform the initial sync of
|
||
a large set of ACLs.
|
||
|
||
If there's a partition or other outage affecting the authoritative datacenter,
|
||
and the [`acl_down_policy`](/docs/agent/options#acl_down_policy)
|
||
is set to "extend-cache", tokens will be resolved during the outage using the
|
||
replicated set of ACLs. An [ACL replication status](/api/acl/acl#check-acl-replication)
|
||
endpoint is available to monitor the health of the replication process.
|
||
Also note that in recent versions of Consul (greater than 1.2.0), using
|
||
`acl_down_policy = "async-cache"` refreshes token asynchronously when an ACL is
|
||
already cached and is expired while similar semantics than "extend-cache".
|
||
It allows to avoid having issues when connectivity with the authoritative is not completely
|
||
broken, but very slow.
|
||
|
||
Locally-resolved ACLs will be cached using the [`acl_ttl`](/docs/agent/options#acl_ttl)
|
||
setting of the non-authoritative datacenter, so these entries may persist in the
|
||
cache for up to the TTL, even after the authoritative datacenter comes back online.
|
||
|
||
ACL replication can also be used to migrate ACLs from one datacenter to another
|
||
using a process like this:
|
||
|
||
1. Enable ACL replication in all datacenters to allow continuation of service
|
||
during the migration, and to populate the target datacenter. Verify replication
|
||
is healthy and caught up to the current ACL index in the target datacenter
|
||
using the [ACL replication status](/api/acl/acl#check-acl-replication)
|
||
endpoint.
|
||
2. Turn down the old authoritative datacenter servers.
|
||
3. Rolling restart the agents in the target datacenter and change the
|
||
`acl_datacenter` servers to itself. This will automatically turn off
|
||
replication and will enable the datacenter to start acting as the authoritative
|
||
datacenter, using its replicated ACLs from before.
|
||
4. Rolling restart the agents in other datacenters and change their `acl_datacenter`
|
||
configuration to the target datacenter.
|
||
|
||
#### Complete ACL Coverage in Consul 0.8 ((#version_8_acls))
|
||
|
||
Consul 0.8 added many more ACL policy types and brought ACL enforcement to Consul
|
||
agents for the first time. To ease the transition to Consul 0.8 for existing ACL
|
||
users, there's a configuration option to disable these new features. To disable
|
||
support for these new ACLs, set the
|
||
[`acl_enforce_version_8`](/docs/agent/options#acl_enforce_version_8) configuration
|
||
option to `false` on Consul clients and servers.
|
||
|
||
Here's a summary of the new features:
|
||
|
||
- Agents now check [`node`](#node-rules) and [`service`](#service-rules) ACL policies
|
||
for catalog-related operations in `/v1/agent` endpoints, such as service and check
|
||
registration and health check updates.
|
||
- Agents enforce a new [`agent`](#agent-rules) ACL policy for utility operations in
|
||
`/v1/agent` endpoints, such as joins and leaves.
|
||
- A new [`node`](#node-rules) ACL policy is enforced throughout Consul, providing a
|
||
mechanism to restrict registration and discovery of nodes by name. This also applies
|
||
to service discovery, so provides an additional dimension for controlling access to
|
||
services.
|
||
- A new [`session`](#session-rules) ACL policy controls the ability to create session
|
||
objects by node name.
|
||
- Anonymous prepared queries (non-templates without a `Name`) now require a valid
|
||
session, which ties their creation to the new [`session`](#session-rules) ACL policy.
|
||
- The existing [`event`](#event-rules) ACL policy has been applied to the
|
||
`/v1/event/list` endpoint.
|
||
|
||
Two new configuration options are used once version 8 ACLs are enabled:
|
||
|
||
- [`acl_agent_master_token`](/docs/agent/options#acl_agent_master_token) is used as
|
||
a special access token that has `agent` ACL policy `write` privileges on each agent where
|
||
it is configured, as well as `node` ACL policy `read` privileges for all nodes. This token
|
||
should only be used by operators during outages when Consul servers aren't available to
|
||
resolve ACL tokens. Applications should use regular ACL tokens during normal operation.
|
||
- [`acl_agent_token`](/docs/agent/options#acl_agent_token) is used internally by
|
||
Consul agents to perform operations to the service catalog when registering themselves
|
||
or sending network coordinates to the servers. This token must at least have `node` ACL
|
||
policy `write` access to the node name it will register as in order to register any
|
||
node-level information like metadata or tagged addresses.
|
||
|
||
Since clients now resolve ACLs locally, the [`acl_down_policy`](/docs/agent/options#acl_down_policy)
|
||
now applies to Consul clients as well as Consul servers. This will determine what the
|
||
client will do in the event that the servers are down.
|
||
|
||
Consul clients must have [`acl_datacenter`](/docs/agent/options#acl_datacenter) configured
|
||
in order to enable agent-level ACL features. If this is set, the agents will contact the Consul
|
||
servers to determine if ACLs are enabled at the cluster level. If they detect that ACLs are not
|
||
enabled, they will check at most every 2 minutes to see if they have become enabled, and will
|
||
start enforcing ACLs automatically. If an agent has an `acl_datacenter` defined, operators will
|
||
need to use the [`acl_agent_master_token`](/docs/agent/options#acl_agent_master_token) to
|
||
perform agent-level operations if the Consul servers aren't present (such as for a manual join
|
||
to the cluster), unless the [`acl_down_policy`](/docs/agent/options#acl_down_policy) on the
|
||
agent is set to "allow".
|
||
|
||
Non-server agents do not need to have the
|
||
[`acl_master_token`](/docs/agent/options#acl_master_token) configured; it is not
|
||
used by agents in any way.
|