---
layout: docs
page_title: Annotations and Labels
description: >-
  The list of available labels and annotations for running Consul on Kubernetes.
---

# Annotations and Labels

## Overview

Consul on Kubernetes provides a few options for customizing how connect-inject behavior should be configured.
This allows the user to configure natively configure Consul on select Kubernetes resources (i.e. pods, services).

- [Annotations](#annotations)
- [Labels](#labels)

## Annotations

Resource annotations could be used on the Kubernetes pod to control connect-inject behavior.

- `consul.hashicorp.com/connect-inject` - If this is "true" then injection
  is enabled. If this is "false" then injection is explicitly disabled.
  The default injector behavior requires pods to opt-in to injection by
  specifying this value as "true". This default can be changed in the
  injector's configuration if desired.

- `consul.hashicorp.com/transparent-proxy` - If this is "true", this Pod
  will run with transparent proxy enabled. This means you can use Kubernetes
  DNS to access upstream services and all inbound and outbound traffic within
  the pod is redirected to go through the proxy.

- `consul.hashicorp.com/transparent-proxy-overwrite-probes` - If this is "true"
  and transparent proxy is enabled, the Connect injector will overwrite Kubernetes
  HTTP probes to point to the Envoy proxy.

- `consul.hashicorp.com/transparent-proxy-exclude-inbound-ports` - A comma-separated
  list of inbound ports to exclude from traffic redirection when running in transparent proxy
  mode.

- `consul.hashicorp.com/transparent-proxy-exclude-outbound-cidrs` - A comma-separated
  list of outbound CIDRs to exclude from traffic redirection when running in transparent proxy
  mode.

- `consul.hashicorp.com/transparent-proxy-exclude-outbound-ports` - A comma-separated
  list of outbound ports to exclude from traffic redirection when running in transparent proxy
  mode.

- `consul.hashicorp.com/transparent-proxy-exclude-uids` - A comma-separated
  list of additional user IDs to exclude from traffic redirection when running in transparent proxy
  mode.

- `consul.hashicorp.com/connect-service` - For pods that accept inbound
  connections, this specifies the name of the service that is being
  served. This defaults to the name of the Kubernetes service associated with the pod.

  If using ACLs, this must be the same name as the Pod's `ServiceAccount`.

- `consul.hashicorp.com/connect-service-port` - For pods that accept inbound
  connections, this specifies the port to route inbound connections to. This
  is the port that the service is listening on. The service port defaults to
  the first exposed port on any container in the pod. If specified, the value
  can be the _name_ of a configured port, such as "http" or it can be a direct
  port value such as "8080". This is the port of the _service_, the proxy
  public listener will listen on a dynamic port.

- `consul.hashicorp.com/connect-service-upstreams` - The list of upstream
  services that this pod needs to connect to via Connect along with a static
  local port to listen for those connections. When transparent proxy is enabled,
  this annotation is optional. There are a few formats this annotation can take:

    - Unlabeled:
       Use the unlabeled annotation format to specify a service name, Consul Enterprise namespaces and partitions, and
       datacenters. To use [cluster peering](/docs/connect/cluster-peering/k8s) with upstreams, use the following
       labeled format.
      - Service name: Place the service name at the beginning of the annotation to specify the upstream service. You can
      also append the datacenter where the service is deployed (optional).
        ```yaml
        annotations:
          "consul.hashicorp.com/connect-service-upstreams":"[service-name]:[port]:[optional datacenter]"
        ```
      - Namespace (requires Consul Enterprise 1.7+): Upstream services may be running in different a namespace. Place
      the upstream namespace after the service name. Refer to  [Consul Enterprise
      Namespaces](#consul-enterprise-namespaces) for additional details about configuring the injector.
        ```yaml
        annotations:
          "consul.hashicorp.com/connect-service-upstreams":"[service-name].[service-namespace]:[port]:[optional datacenter]"
        ```
        If the namespace is not specified, the annotation will default to the namespace of the source service.
        If you are not using Consul Enterprise 1.7+, Consul will interpret the value placed in the namespace position as part of the service name.

        - Admin partitions (requires Consul Enterprise 1.11+): Upstream services may be running in a different
          partition. You must specify the namespace when specifying a partition. Place the partition name after the namespace. If you specify the name of the datacenter (optional), it must be the local datacenter. Communicating across partitions using this method is only supported within a
          datacenter. For cross partition communication across datacenters, see [cluster
          peering](/docs/connect/cluster-peering/k8s).
          ```yaml
          annotations:
            "consul.hashicorp.com/connect-service-upstreams":"[service-name].[service-namespace].[service-partition]:[port]:[optional datacenter]"
          ```
    - [Prepared queries](/docs/connect/proxies#dynamic-upstreams-require-native-integration): Prepend the annotation
      with `prepared_query` and place the name of the query at the beginning of the string.
      ```yaml
      annotations:
        'consul.hashicorp.com/connect-service-upstreams': 'prepared_query:[query name]:[port]'
      ```

    - Labeled (requires consul-k8s v0.45.0+):
      The labeled format is required when using the cluster peering feature and specifying an upstream in another
      peer. You can specify a Consul Enterprise namespace, partition, or datacenter. The format supports only one peer, datacenter, or partition.
      - Service name: Place the service name at the beginning of the annotation followed by `.svc` to specify the upstream service.
        ```yaml
        annotations:
          "consul.hashicorp.com/connect-service-upstreams":"[service-name].svc:[port]"
        ```
      - Peer or datacenter: Place the peer or datacenter after `svc.` followed by either `peer` or `dc` and the port number.
        ```yaml
        annotations:
          "consul.hashicorp.com/connect-service-upstreams":"[service-name].svc.[service-peer].peer:[port]"
        ```
        ```yaml
        annotations:
          "consul.hashicorp.com/connect-service-upstreams":"[service-name].svc.[service-dc].dc:[port]"
        ```
      - Namespace (required Consul Enterprise): Place the namespace after `svc.` followed by `ns` and the port number.
        ```yaml
        annotations:
          "consul.hashicorp.com/connect-service-upstreams":"[service-name].svc.[service-namespace].ns:[port]"
        ```
        When specifying a peer, datacenter, or admin partition when namespaces are enabled, you must
        provide the namespace and a peer, datacenter, or partition.
        ```yaml
        annotations:
          "consul.hashicorp.com/connect-service-upstreams":"[service-name].svc.[service-namespace].ns.[service-peer].peer:[port]"
        ```
        ```yaml
        annotations:
          "consul.hashicorp.com/connect-service-upstreams":"[service-name].svc.[service-namespace].ns.[service-partition].ap:[port]"
        ```
        ```yaml
        annotations:
          "consul.hashicorp.com/connect-service-upstreams":"[service-name].svc.[service-namespace].ns.[service-dc].dc:[port]"
        ```

    - Multiple upstreams: Delimit multiple services or upstreams with commas. You can specify any of the unlabeled, labeled, or prepared query formats when using the supported versions for the formats.

      ```yaml
      annotations:
        "consul.hashicorp.com/connect-service-upstreams":"[service-name]:[port]:[optional datacenter],[service-name]:[port]:[optional datacenter]"
      ```

      ```yaml
      annotations:
        "consul.hashicorp.com/connect-service-upstreams":"[service-name]:[port]:[optional datacenter],prepared_query:[query name]:[port],[service-name].svc:[port]"
      ```

- `consul.hashicorp.com/envoy-extra-args` - A space-separated list of [arguments](https://www.envoyproxy.io/docs/envoy/latest/operations/cli)
  to be passed to the injected envoy binary.

  ```yaml
  annotations:
    consul.hashicorp.com/envoy-extra-args: '--log-level debug --disable-hot-restart'
  ```

- `consul.hashicorp.com/kubernetes-service` - Specifies the name of the Kubernetes service used for Consul service registration.
  This is useful when multiple Kubernetes services reference the same deployment. Any service that does not match the name
  specified in this annotation is ignored. When not specified no service is ignored.

  ```yaml
  annotations:
    consul.hashicorp.com/kubernetes-service: 'service-name-to-use'
  ```

- `consul.hashicorp.com/service-tags` - A comma separated list of tags that will
  be applied to the Consul service and its sidecar.

  ```yaml
  annotations:
    consul.hashicorp.com/service-tags: foo,bar,baz
  ```

  If you need your tag to have a comma in it you can escape the comma with `\,`. For example,
  `consul.hashicorp.com/service-tags: foo\,bar\,baz` will become the single tag `foo,bar,baz`.

- `consul.hashicorp.com/service-meta-<YOUR_KEY>` - Set Consul meta key/value
  pairs that will be applied to the Consul service and its sidecar.
  The key will be what comes after `consul.hashicorp.com/service-meta-`, e.g.
  `consul.hashicorp.com/service-meta-foo: bar` will result in `foo: bar`.

  ```yaml
  annotations:
    consul.hashicorp.com/service-meta-foo: baz
    consul.hashicorp.com/service-meta-bar: baz
  ```

- `consul.hashicorp.com/sidecar-proxy-` - Override default resource settings for
  the sidecar proxy container.
  The defaults are set in Helm config via the [`connectInject.sidecarProxy.resources`](/docs/k8s/helm#v-connectinject-sidecarproxy-resources) key.

  - `consul.hashicorp.com/sidecar-proxy-cpu-limit` - Override the default CPU limit.
  - `consul.hashicorp.com/sidecar-proxy-cpu-request` - Override the default CPU request.
  - `consul.hashicorp.com/sidecar-proxy-memory-limit` - Override the default memory limit.
  - `consul.hashicorp.com/sidecar-proxy-memory-request` - Override the default memory request.

- `consul.hashicorp.com/consul-envoy-proxy-concurrency` - Override the default envoy worker thread count. This should be set low for sidecar
  usecases and can be raised for edge proxies like gateways.

- `consul.hashicorp.com/consul-sidecar-` - Override default resource settings for
  the `consul-sidecar` container.
  The defaults are set in Helm config via the [`global.consulSidecarContainer.resources`](/docs/k8s/helm#v-global-consulsidecarcontainer) key.

  - `consul.hashicorp.com/consul-sidecar-cpu-limit` - Override the default CPU limit.
  - `consul.hashicorp.com/consul-sidecar-cpu-request` - Override the default CPU request.
  - `consul.hashicorp.com/consul-sidecar-memory-limit` - Override the default memory limit.
  - `consul.hashicorp.com/consul-sidecar-memory-request` - Override the default memory request.

- `consul.hashicorp.com/enable-metrics` - Override the default Helm value [`connectInject.metrics.defaultEnabled`](/docs/k8s/helm#v-connectinject-metrics-defaultenabled).
- `consul.hashicorp.com/enable-metrics-merging` - Override the default Helm value [`connectInject.metrics.defaultEnableMerging`](/docs/k8s/helm#v-connectinject-metrics-defaultenablemerging).
- `consul.hashicorp.com/merged-metrics-port` - Override the default Helm value [`connectInject.metrics.defaultMergedMetricsPort`](/docs/k8s/helm#v-connectinject-metrics-defaultmergedmetricsport).
- `consul.hashicorp.com/prometheus-scrape-port` - Override the default Helm value [`connectInject.metrics.defaultPrometheusScrapePort`](/docs/k8s/helm#v-connectinject-metrics-defaultprometheusscrapeport).
- `consul.hashicorp.com/prometheus-scrape-path` - Override the default Helm value [`connectInject.metrics.defaultPrometheusScrapePath`](/docs/k8s/helm#v-connectinject-metrics-defaultprometheusscrapepath).
- `consul.hashicorp.com/service-metrics-port` - Set the port where the Connect service exposes metrics.
- `consul.hashicorp.com/service-metrics-path` - Set the path where the Connect service exposes metrics.
- `consul.hashicorp.com/connect-inject-mount-volume` - Comma separated list of container names to mount the connect-inject volume into. The volume will be mounted at `/consul/connect-inject`. The connect-inject volume contains Consul internals data needed by the other sidecar containers, for example the `consul` binary, and the Pod's Consul ACL token. This data can be valuable for advanced use-cases, such as making requests to the Consul API from within application containers.

## Labels

Resource labels could be used on a Kubernetes service to control connect-inject behavior.

- `consul.hashicorp.com/service-ignore` - This label can be set on a Kubernetes Service.
  If set to "true", the service will not be used to register a Consul endpoint. This can be
  useful in cases where 2 or more services point to the same deployment. Consul cannot register
  multiple endpoints to the same deployment. This label can be used to tell the endpoint
  registration to ignore all services except for the one which should be used for routing requests
  using Consul.