To avoid unintended tampering with remote downstreams via service
config, refactor BasicEnvoyExtender and RuntimeConfig to disallow
typical Envoy extensions from being applied to non-local proxies.
Continue to allow this behavior for AWS Lambda and the read-only
Validate builtin extensions.
Addresses CVE-2023-2816.
* API Gateway XDS Primitives, endpoints and clusters (#17002)
* XDS primitive generation for endpoints and clusters
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
* server_test
* deleted extra file
* add missing parents to test
---------
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
* Routes for API Gateway (#17158)
* XDS primitive generation for endpoints and clusters
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
* server_test
* deleted extra file
* add missing parents to test
* checkpoint
* delete extra file
* httproute flattening code
* linting issue
* so close on this, calling for tonight
* unit test passing
* add in header manip to virtual host
* upstream rebuild commented out
* Use consistent upstream name whether or not we're rebuilding
* Start working through route naming logic
* Fix typos in test descriptions
* Simplify route naming logic
* Simplify RebuildHTTPRouteUpstream
* Merge additional compiled discovery chains instead of overwriting
* Use correct chain for flattened route, clean up + add TODOs
* Remove empty conditional branch
* Restore previous variable declaration
Limit the scope of this PR
* Clean up, improve TODO
* add logging, clean up todos
* clean up function
---------
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
* checkpoint, skeleton, tests not passing
* checkpoint
* endpoints xds cluster configuration
* resources test fix
* fix reversion in resources_test
* checkpoint
* Update agent/proxycfg/api_gateway.go
Co-authored-by: John Maguire <john.maguire@hashicorp.com>
* unit tests passing
* gofmt
* add deterministic sorting to appease the unit test gods
* remove panic
* Find ready upstream matching listener instead of first in list
* Clean up, improve TODO
* Modify getReadyUpstreams to filter upstreams by listener (#17410)
Each listener would previously have all upstreams from any route that bound to the listener. This is problematic when a route bound to one listener also binds to other listeners and so includes upstreams for multiple listeners. The list for a given listener would then wind up including upstreams for other listeners.
* clean up todos, references to api gateway in listeners_ingress
* merge in Nathan's fix
* Update agent/consul/discoverychain/gateway.go
* cleanup current todos, remove snapshot manipulation from generation code
* Update agent/structs/config_entry_gateways.go
Co-authored-by: Thomas Eckert <teckert@hashicorp.com>
* Update agent/consul/discoverychain/gateway.go
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
* Update agent/consul/discoverychain/gateway.go
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
* Update agent/proxycfg/snapshot.go
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
* clarified header comment for FlattenHTTPRoute, changed RebuildHTTPRouteUpstream to BuildHTTPRouteUpstream
* simplify cert logic
* Delete scratch
* revert route related changes in listener PR
* Update agent/consul/discoverychain/gateway.go
* Update agent/proxycfg/snapshot.go
* clean up uneeded extra lines in endpoints
---------
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
Co-authored-by: John Maguire <john.maguire@hashicorp.com>
Co-authored-by: Thomas Eckert <teckert@hashicorp.com>
* endpoints xds cluster configuration
* clusters xds native generation
* resources test fix
* fix reversion in resources_test
* Update agent/proxycfg/api_gateway.go
Co-authored-by: John Maguire <john.maguire@hashicorp.com>
* gofmt
* Modify getReadyUpstreams to filter upstreams by listener (#17410)
Each listener would previously have all upstreams from any route that bound to the listener. This is problematic when a route bound to one listener also binds to other listeners and so includes upstreams for multiple listeners. The list for a given listener would then wind up including upstreams for other listeners.
* Update agent/proxycfg/api_gateway.go
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
* Restore import blocking
* Undo removal of unrelated code
---------
Co-authored-by: John Maguire <john.maguire@hashicorp.com>
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
This change enables workflows where you are reapplying a resource that should have an owner ref to publish modifications to the resources data without performing a read to figure out the current owner resource incarnations UID.
Basically we want workflows similar to `kubectl apply` or `consul config write` to be able to work seamlessly even for owned resources.
In these cases the users intention is to have the resource owned by the “current” incarnation of the owner resource.
* endpoints xds cluster configuration
* resources test fix
* fix reversion in resources_test
* Update agent/proxycfg/api_gateway.go
Co-authored-by: John Maguire <john.maguire@hashicorp.com>
* gofmt
* Modify getReadyUpstreams to filter upstreams by listener (#17410)
Each listener would previously have all upstreams from any route that bound to the listener. This is problematic when a route bound to one listener also binds to other listeners and so includes upstreams for multiple listeners. The list for a given listener would then wind up including upstreams for other listeners.
* Update agent/proxycfg/api_gateway.go
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
* Restore import blocking
* Skip to next route if route has no upstreams
* cleanup
* change set from bool to empty struct
---------
Co-authored-by: John Maguire <john.maguire@hashicorp.com>
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
* agent: configure server lastseen timestamp
Signed-off-by: Dan Bond <danbond@protonmail.com>
* use correct config
Signed-off-by: Dan Bond <danbond@protonmail.com>
* add comments
Signed-off-by: Dan Bond <danbond@protonmail.com>
* use default age in test golden data
Signed-off-by: Dan Bond <danbond@protonmail.com>
* add changelog
Signed-off-by: Dan Bond <danbond@protonmail.com>
* fix runtime test
Signed-off-by: Dan Bond <danbond@protonmail.com>
* agent: add server_metadata
Signed-off-by: Dan Bond <danbond@protonmail.com>
* update comments
Signed-off-by: Dan Bond <danbond@protonmail.com>
* correctly check if metadata file does not exist
Signed-off-by: Dan Bond <danbond@protonmail.com>
* follow instructions for adding new config
Signed-off-by: Dan Bond <danbond@protonmail.com>
* add comments
Signed-off-by: Dan Bond <danbond@protonmail.com>
* update comments
Signed-off-by: Dan Bond <danbond@protonmail.com>
* Update agent/agent.go
Co-authored-by: Dan Upton <daniel@floppy.co>
* agent/config: add validation for duration with min
Signed-off-by: Dan Bond <danbond@protonmail.com>
* docs: add new server_rejoin_age_max config definition
Signed-off-by: Dan Bond <danbond@protonmail.com>
* agent: add unit test for checking server last seen
Signed-off-by: Dan Bond <danbond@protonmail.com>
* agent: log continually for 60s before erroring
Signed-off-by: Dan Bond <danbond@protonmail.com>
* pr comments
Signed-off-by: Dan Bond <danbond@protonmail.com>
* remove unneeded todo
* agent: fix error message
Signed-off-by: Dan Bond <danbond@protonmail.com>
---------
Signed-off-by: Dan Bond <danbond@protonmail.com>
Co-authored-by: Dan Upton <daniel@floppy.co>
* Add v1/internal/service-virtual-ip for manually setting service VIPs
* Attach service virtual IP info to compiled discovery chain
* Separate auto-assigned and manual VIPs in response
The grpc resolver implementation is fed from changes to the
router.Router. Within the router there is a map of various areas storing
the addressing information for servers in those areas. All map entries
are of the WAN variety except a single special entry for the LAN.
Addressing information in the LAN "area" are local addresses intended
for use when making a client-to-server or server-to-server request.
The client agent correctly updates this LAN area when receiving lan serf
events, so by extension the grpc resolver works fine in that scenario.
The server agent only initially populates a single entry in the LAN area
(for itself) on startup, and then never mutates that area map again.
For normal RPCs a different structure is used for LAN routing.
Additionally when selecting a server to contact in the local datacenter
it will randomly select addresses from either the LAN or WAN addressed
entries in the map.
Unfortunately this means that the grpc resolver stack as it exists on
server agents is either broken or only accidentally functions by having
servers dial each other over the WAN-accessible address. If the operator
disables the serf wan port completely likely this incidental functioning
would break.
This PR enforces that local requests for servers (both for stale reads
or leader forwarded requests) exclusively use the LAN "area" information
and also fixes it so that servers keep that area up to date in the
router.
A test for the grpc resolver logic was added, as well as a higher level
full-stack test to ensure the externally perceived bug does not return.
* snapshot: some improvments to the snapshot process
Co-authored-by: trujillo-adam <47586768+trujillo-adam@users.noreply.github.com>
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
UNIX domain socket paths are limited to 104-108 characters, depending on
the OS. This limit was quite easy to exceed when testing the feature on
Kubernetes, due to how proxy IDs encode the Pod ID eg:
metrics-collector-59467bcb9b-fkkzl-hcp-metrics-collector-sidecar-proxy
To ensure we stay under that character limit this commit makes a
couple changes:
- Use a b64 encoded SHA1 hash of the namespace + proxy ID to create a
short and deterministic socket file name.
- Add validation to proxy registrations and proxy-defaults to enforce a
limit on the socket directory length.
Fix multiple issues related to proxycfg health queries.
1. The datacenter was not being provided to a proxycfg query, which resulted in
bypassing agentless query optimizations and using the normal API instead.
2. The health rpc endpoint would return a zero index when insufficient ACLs were
detected. This would result in the agent cache performing an infinite loop of
queries in rapid succession without backoff.
Fix issue with peer stream node cleanup.
This commit encompasses a few problems that are closely related due to their
proximity in the code.
1. The peerstream utilizes node IDs in several locations to determine which
nodes / services / checks should be cleaned up or created. While VM deployments
with agents will likely always have a node ID, agentless uses synthetic nodes
and does not populate the field. This means that for consul-k8s deployments, all
services were likely bundled together into the same synthetic node in some code
paths (but not all), resulting in strange behavior. The Node.Node field should
be used instead as a unique identifier, as it should always be populated.
2. The peerstream cleanup process for unused nodes uses an incorrect query for
node deregistration. This query is NOT namespace aware and results in the node
(and corresponding services) being deregistered prematurely whenever it has zero
default-namespace services and 1+ non-default-namespace services registered on
it. This issue is tricky to find due to the incorrect logic mentioned in #1,
combined with the fact that the affected services must be co-located on the same
node as the currently deregistering service for this to be encountered.
3. The stream tracker did not understand differences between services in
different namespaces and could therefore report incorrect numbers. It was
updated to utilize the full service name to avoid conflicts and return proper
results.
When using vault as a CA and generating the local signing cert, try to
enable the PKI endpoint's auto-tidy feature with it set to tidy expired
issuers.
This adds filtering for service-defaults: consul config list -filter 'MutualTLSMode == "permissive"'.
It adds CLI warnings when the CLI writes a config entry and sees that either service-defaults or proxy-defaults contains MutualTLSMode=permissive, or sees that the mesh config entry contains AllowEnablingPermissiveMutualTLSMode=true.
Partitioned downstreams with peered upstreams could not properly merge central config info (i.e. proxy-defaults and service-defaults things like mesh gateway modes) if the upstream had an empty DestinationPartition field in Enterprise.
Due to data flow, if this setup is done using Consul client agents the field is never empty and thus does not experience the bug.
When a service is registered directly to the catalog as is the case for consul-dataplane use this field may be empty and and the internal machinery of the merging function doesn't handle this well.
This PR ensures the internal machinery of that function is referentially self-consistent.
* Persist HCP management token from server config
We want to move away from injecting an initial management token into
Consul clusters linked to HCP. The reasoning is that by using a separate
class of token we can have more flexibility in terms of allowing HCP's
token to co-exist with the user's management token.
Down the line we can also more easily adjust the permissions attached to
HCP's token to limit it's scope.
With these changes, the cloud management token is like the initial
management token in that iit has the same global management policy and
if it is created it effectively bootstraps the ACL system.
* Update SDK and mock HCP server
The HCP management token will now be sent in a special field rather than
as Consul's "initial management" token configuration.
This commit also updates the mock HCP server to more accurately reflect
the behavior of the CCM backend.
* Refactor HCP bootstrapping logic and add tests
We want to allow users to link Consul clusters that already exist to
HCP. Existing clusters need care when bootstrapped by HCP, since we do
not want to do things like change ACL/TLS settings for a running
cluster.
Additional changes:
* Deconstruct MaybeBootstrap so that it can be tested. The HCP Go SDK
requires HTTPS to fetch a token from the Auth URL, even if the backend
server is mocked. By pulling the hcp.Client creation out we can modify
its TLS configuration in tests while keeping the secure behavior in
production code.
* Add light validation for data received/loaded.
* Sanitize initial_management token from received config, since HCP will
only ever use the CloudConfig.MangementToken.
* Add changelog entry
* Move status condition for invalid certifcate to reference the listener
that is using the certificate
* Fix where we set the condition status for listeners and certificate
refs, added tests
* Add changelog
* Add MaxEjectionPercent to config entry
* Add BaseEjectionTime to config entry
* Add MaxEjectionPercent and BaseEjectionTime to protobufs
* Add MaxEjectionPercent and BaseEjectionTime to api
* Fix integration test breakage
* Verify MaxEjectionPercent and BaseEjectionTime in integration test upstream confings
* Website docs for MaxEjectionPercent and BaseEjection time
* Add `make docs` to browse docs at http://localhost:3000
* Changelog entry
* so that is the difference between consul-docker and dev-docker
* blah
* update proto funcs
* update proto
---------
Co-authored-by: Maliz <maliheh.monshizadeh@hashicorp.com>
* Fix straggler from renaming Register->RegisterTypes
* somehow a lint failure got through previously
* Fix lint-consul-retry errors
* adding in fix for success jobs getting skipped. (#17132)
* Temporarily disable inmem backend conformance test to get green pipeline
* Another test needs disabling
---------
Co-authored-by: John Murret <john.murret@hashicorp.com>
* normalize status conditions for gateways and routes
* Added tests for checking condition status and panic conditions for
validating combinations, added dummy code for fsm store
* get rid of unneeded gateway condition generator struct
* Remove unused file
* run go mod tidy
* Update tests, add conflicted gateway status
* put back removed status for test
* Fix linting violation, remove custom conflicted status
* Update fsm commands oss
* Fix incorrect combination of type/condition/status
* cleaning up from PR review
* Change "invalidCertificate" to be of accepted status
* Move status condition enums into api package
* Update gateways controller and generated code
* Update conditions in fsm oss tests
* run go mod tidy on consul-container module to fix linting
* Fix type for gateway endpoint test
* go mod tidy from changes to api
* go mod tidy on troubleshoot
* Fix route conflicted reason
* fix route conflict reason rename
* Fix text for gateway conflicted status
* Add valid certificate ref condition setting
* Revert change to resolved refs to be handled in future PR
* added method for converting SamenessGroupConfigEntry
- added new method `ToQueryFailoverTargets` for converting a SamenessGroupConfigEntry's members to a list of QueryFailoverTargets
- renamed `ToFailoverTargets` ToServiceResolverFailoverTargets to distinguish it from `ToQueryFailoverTargets`
* Added SamenessGroup to PreparedQuery
- exposed Service.Partition to API when defining a prepared query
- added a method for determining if a QueryFailoverOptions is empty
- This will be useful for validation
- added unit tests
* added method for retrieving a SamenessGroup to state store
* added logic for using PQ with SamenessGroup
- added branching path for SamenessGroup handling in execute. It will be handled separate from the normal PQ case
- added a new interface so that the `GetSamenessGroupFailoverTargets` can be properly tested
- separated the execute logic into a `targetSelector` function so that it can be used for both failover and sameness group PQs
- split OSS only methods into new PQ OSS files
- added validation that `samenessGroup` is an enterprise only feature
* added documentation for PQ SamenessGroup
Before this change, we were not fetching service resolvers (and therefore
service defaults) configuration entries for services on members of sameness
groups.
This implements permissive mTLS , which allows toggling services into "permissive" mTLS mode.
Permissive mTLS mode allows incoming "non Consul-mTLS" traffic to be forward unmodified to the application.
* Update service-defaults and proxy-defaults config entries with a MutualTLSMode field
* Update the mesh config entry with an AllowEnablingPermissiveMutualTLS field and implement the necessary validation. AllowEnablingPermissiveMutualTLS must be true to allow changing to MutualTLSMode=permissive, but this does not require that all proxy-defaults and service-defaults are currently in strict mode.
* Update xDS listener config to add a "permissive filter chain" when MutualTLSMode=permissive for a particular service. The permissive filter chain matches incoming traffic by the destination port. If the destination port matches the service port from the catalog, then no mTLS is required and the traffic sent is forwarded unmodified to the application.
This commit adds the PrioritizeByLocality field to both proxy-config
and service-resolver config entries for locality-aware routing. The
field is currently intended for enterprise only, and will be used to
enable prioritization of service-mesh connections to services based
on geographical region / zone.
- added Sameness Group to config entries
- added Sameness Group to subscriptions
* generated proto files
* added Sameness Group events to the state store
- added test cases
* Refactored health RPC Client
- moved code that is common to rpcclient under rpcclient common.go. This will help set us up to support future RPC clients
* Refactored proxycfg glue views
- Moved views to rpcclient config entry. This will allow us to reuse this code for a config entry client
* added config entry RPC Client
- Copied most of the testing code from rpcclient/health
* hooked up new rpcclient in agent
* fixed documentation and comments for clarity
* Add a test to reproduce the race condition
* Fix race condition by publishing the event after the commit and adding a lock to prevent out of order events.
* split publish to generate the list of events before committing the transaction.
* add changelog
* remove extra func
* Apply suggestions from code review
Co-authored-by: Dan Upton <daniel@floppy.co>
* add comment to explain test
---------
Co-authored-by: Dan Upton <daniel@floppy.co>
Prior to this change, peer services would be targeted by service-default
overrides as long as the new `peer` field was not found in the config entry.
This commit removes that deprecated backwards-compatibility behavior. Now
it is necessary to specify the `peer` field in order for upstream overrides
to apply to a peer upstream.
The old setting of 24 hours was not enough time to deal with an expiring certificates. This change ups it to 28 days OR 40% of the full cert duration, whichever is shorter. It also adds details to the log message to indicate which certificate it is logging about and a suggested action.
Currently, if an acceptor peer deletes a peering the dialer's peering
will eventually get to a "terminated" state. If the two clusters need to
be re-peered the acceptor will re-generate the token but the dialer will
encounter this error on the call to establish:
"failed to get addresses to dial peer: failed to refresh peer server
addresses, will continue to use initial addresses: there is no active
peering for "<<<ID>>>""
This is because in `exchangeSecret().GetDialAddresses()` we will get an
error if fetching addresses for an inactive peering. The peering shows
up as inactive at this point because of the existing terminated state.
Rather than checking whether a peering is active we can instead check
whether it was deleted. This way users do not need to delete terminated
peerings in the dialing cluster before re-establishing them.
* Rename Intermediate cert references to LeafSigningCert
Within the Consul CA subsystem, the term "Intermediate"
is confusing because the meaning changes depending on
provider and datacenter (primary vs secondary). For
example, when using the Consul CA the "ActiveIntermediate"
may return the root certificate in a primary datacenter.
At a high level, we are interested in knowing which
CA is responsible for signing leaf certs, regardless of
its position in a certificate chain. This rename makes
the intent clearer.
* Move provider state check earlier
* Remove calls to GenerateLeafSigningCert
GenerateLeafSigningCert (formerly known
as GenerateIntermediate) is vestigial in
non-Vault providers, as it simply returns
the root certificate in primary
datacenters.
By folding Vault's intermediate cert logic
into `GenerateRoot` we can encapsulate
the intermediate cert handling within
`newCARoot`.
* Move GenerateLeafSigningCert out of PrimaryProvidder
Now that the Vault Provider calls
GenerateLeafSigningCert within
GenerateRoot, we can remove the method
from all other providers that never
used it in a meaningful way.
* Add test for IntermediatePEM
* Rename GenerateRoot to GenerateCAChain
"Root" was being overloaded in the Consul CA
context, as different providers and configs
resulted in a single root certificate or
a chain originating from an external trusted
CA. Since the Vault provider also generates
intermediates, it seems more accurate to
call this a CAChain.
This PR adds the sameness-group field to exported-service
config entries, which allows for services to be exported
to multiple destination partitions / peers easily.
* Use merge of enterprise meta's rather than new custom method
* Add merge logic for tcp routes
* Add changelog
* Normalize certificate refs on gateways
* Fix infinite call loop
* Explicitly call enterprise meta
This commit swaps the partition field to the local partition for
discovery chains targeting peers. Prior to this change, peer upstreams
would always use a value of default regardless of which partition they
exist in. This caused several issues in xds / proxycfg because of id
mismatches.
Some prior fixes were made to deal with one-off id mismatches that this
PR also cleans up, since they are no longer needed.
* delete config when nil
* fix mock interface implementation
* fix handler test to use the right assertion
* extract DeleteConfig as a separate API.
* fix mock limiter implementation to satisfy the new interface
* fix failing tests
* add test comments
* Remove unused are hosts set check
* Remove all traces of unused 'AreHostsSet' parameter
* Remove unused Hosts attribute
* Remove commented out use of snap.APIGateway.Hosts
* Refactored "NewGatewayService" to handle namespaces, fixed
TestHTTPRouteFlattening test
* Fixed existing http_route tests for namespacing
* Squash aclEnterpriseMeta for ResourceRefs and HTTPServices, accept
namespace for creating connect services and regular services
* Use require instead of assert after creating namespaces in
http_route_tests
* Refactor NewConnectService and NewGatewayService functions to use cfg
objects to reduce number of method args
* Rename field on SidecarConfig in tests from `SidecarServiceName` to
`Name` to avoid stutter
This commit fixes an issue where trust bundles could not be read
by services in a non-default namespace, unless they had excessive
ACL permissions given to them.
Prior to this change, `service:write` was required in the default
namespace in order to read the trust bundle. Now, `service:write`
to a service in any namespace is sufficient.
If a CA config update did not cause a root change, the codepath would return early and skip some steps which preserve its intermediate certificates and signing key ID. This commit re-orders some code and prevents updates from generating new intermediate certificates.
This commit adds a sameness-group config entry to the API and structs packages. It includes some validation logic and a new memdb index that tracks the default sameness-group for each partition. Sameness groups will simplify the effort of managing failovers / intentions / exports for peers and partitions.
Note that this change purely to introduce the configuration entry and does not include the full functionality of sameness-groups.
Co-authored-by: Ashvitha Sridharan <ashvitha.sridharan@hashicorp.com>
Co-authored-by: Freddy <freddygv@users.noreply.github.com>
Add a new envoy flag: "envoy_hcp_metrics_bind_socket_dir", a directory
where a unix socket will be created with the name
`<namespace>_<proxy_id>.sock` to forward Envoy metrics.
If set, this will configure:
- In bootstrap configuration a local stats_sink and static cluster.
These will forward metrics to a loopback listener sent over xDS.
- A dynamic listener listening at the socket path that the previously
defined static cluster is sending metrics to.
- A dynamic cluster that will forward traffic received at this listener
to the hcp-metrics-collector service.
Reasons for having a static cluster pointing at a dynamic listener:
- We want to secure the metrics stream using TLS, but the stats sink can
only be defined in bootstrap config. With dynamic listeners/clusters
we can use the proxy's leaf certificate issued by the Connect CA,
which isn't available at bootstrap time.
- We want to intelligently route to the HCP collector. Configuring its
addreess at bootstrap time limits our flexibility routing-wise. More
on this below.
Reasons for defining the collector as an upstream in `proxycfg`:
- The HCP collector will be deployed as a mesh service.
- Certificate management is taken care of, as mentioned above.
- Service discovery and routing logic is automatically taken care of,
meaning that no code changes are required in the xds package.
- Custom routing rules can be added for the collector using discovery
chain config entries. Initially the collector is expected to be
deployed to each admin partition, but in the future could be deployed
centrally in the default partition. These config entries could even be
managed by HCP itself.
Add support for using existing vault auto-auth configurations as the
provider configuration when using Vault's CA provider with AliCloud.
AliCloud requires 2 extra fields to enable it to use STS (it's preferred
auth setup). Our vault-plugin-auth-alicloud package contained a method
to help generate them as they require you to make an http call to
a faked endpoint proxy to get them (url and headers base64 encoded).
Receiving an "acl not found" error from an RPC in the agent cache and the
streaming/event components will cause any request loops to cease under the
assumption that they will never work again if the token was destroyed. This
prevents log spam (#14144, #9738).
Unfortunately due to things like:
- authz requests going to stale servers that may not have witnessed the token
creation yet
- authz requests in a secondary datacenter happening before the tokens get
replicated to that datacenter
- authz requests from a primary TO a secondary datacenter happening before the
tokens get replicated to that datacenter
The caller will get an "acl not found" *before* the token exists, rather than
just after. The machinery added above in the linked PRs will kick in and
prevent the request loop from looping around again once the tokens actually
exist.
For `consul-dataplane` usages, where xDS is served by the Consul servers
rather than the clients ultimately this is not a problem because in that
scenario the `agent/proxycfg` machinery is on-demand and launched by a new xDS
stream needing data for a specific service in the catalog. If the watching
goroutines are terminated it ripples down and terminates the xDS stream, which
CDP will eventually re-establish and restart everything.
For Consul client usages, the `agent/proxycfg` machinery is ahead-of-time
launched at service registration time (called "local" in some of the proxycfg
machinery) so when the xDS stream comes in the data is already ready to go. If
the watching goroutines terminate it should terminate the xDS stream, but
there's no mechanism to re-spawn the watching goroutines. If the xDS stream
reconnects it will see no `ConfigSnapshot` and will not get one again until
the client agent is restarted, or the service is re-registered with something
changed in it.
This PR fixes a few things in the machinery:
- there was an inadvertent deadlock in fetching snapshot from the proxycfg
machinery by xDS, such that when the watching goroutine terminated the
snapshots would never be fetched. This caused some of the xDS machinery to
get indefinitely paused and not finish the teardown properly.
- Every 30s we now attempt to re-insert all locally registered services into
the proxycfg machinery.
- When services are re-inserted into the proxycfg machinery we special case
"dead" ones such that we unilaterally replace them rather that doing that
conditionally.
Adds support for the approle auth-method. Only handles using the approle
role/secret to auth and it doesn't support the agent's extra management
configuration options (wrap and delete after read) as they are not
required as part of the auth (ie. they are vault agent things).
* Fix issue where terminating gateway service resolvers weren't properly cleaned up
* Add integration test for cleaning up resolvers
* Add changelog entry
* Use state test and drop integration test
* Leverage ServiceResolver ConnectTimeout for route timeouts to make TerminatingGateway upstream timeouts configurable
* Regenerate golden files
* Add RequestTimeout field
* Add changelog entry
Adds support for a jwt token in a file. Simply reads the file and sends
the read in jwt along to the vault login.
It also supports a legacy mode with the jwt string being passed
directly. In which case the path is made optional.
Does the required dance with the local HTTP endpoint to get the required
data for the jwt based auth setup in Azure. Keeps support for 'legacy'
mode where all login data is passed on via the auth methods parameters.
Refactored check for hardcoded /login fields.
Registering gRPC balancers is thread-unsafe because they are stored in a
global map variable that is accessed without holding a lock. Therefore,
it's expected that balancers are registered _once_ at the beginning of
your program (e.g. in a package `init` function) and certainly not after
you've started dialing connections, etc.
> NOTE: this function must only be called during initialization time
> (i.e. in an init() function), and is not thread-safe.
While this is fine for us in production, it's challenging for tests that
spin up multiple agents in-memory. We currently register a balancer per-
agent which holds agent-specific state that cannot safely be shared.
This commit introduces our own registry that _is_ thread-safe, and
implements the Builder interface such that we can call gRPC's `Register`
method once, on start-up. It uses the same pattern as our resolver
registry where we use the dial target's host (aka "authority"), which is
unique per-agent, to determine which builder to use.
Prior to this commit, all peer services were transmitted as connect-enabled
as long as a one or more mesh-gateways were healthy. With this change, there
is now a difference between typical services and connect services transmitted
via peering.
A service will be reported as "connect-enabled" as long as any of these
conditions are met:
1. a connect-proxy sidecar is registered for the service name.
2. a connect-native instance of the service is registered.
3. a service resolver / splitter / router is registered for the service name.
4. a terminating gateway has registered the service.
Protobuf Refactoring for Multi-Module Cleanliness
This commit includes the following:
Moves all packages that were within proto/ to proto/private
Rewrites imports to account for the packages being moved
Adds in buf.work.yaml to enable buf workspaces
Names the proto-public buf module so that we can override the Go package imports within proto/buf.yaml
Bumps the buf version dependency to 1.14.0 (I was trying out the version to see if it would get around an issue - it didn't but it also doesn't break things and it seemed best to keep up with the toolchain changes)
Why:
In the future we will need to consume other protobuf dependencies such as the Google HTTP annotations for openapi generation or grpc-gateway usage.
There were some recent changes to have our own ratelimiting annotations.
The two combined were not working when I was trying to use them together (attempting to rebase another branch)
Buf workspaces should be the solution to the problem
Buf workspaces means that each module will have generated Go code that embeds proto file names relative to the proto dir and not the top level repo root.
This resulted in proto file name conflicts in the Go global protobuf type registry.
The solution to that was to add in a private/ directory into the path within the proto/ directory.
That then required rewriting all the imports.
Is this safe?
AFAICT yes
The gRPC wire protocol doesn't seem to care about the proto file names (although the Go grpc code does tack on the proto file name as Metadata in the ServiceDesc)
Other than imports, there were no changes to any generated code as a result of this.
* Include secret type when building resources from config snapshot
* First pass at generating envoy secrets from api-gateway snapshot
* Update comments for xDS update order
* Add secret type + corresponding golden files to existing tests
* Initialize test helpers for testing api-gateway resource generation
* Generate golden files for new api-gateway xDS resource test
* Support ADS for TLS certificates on api-gateway
* Configure TLS on api-gateway listeners
* Inline TLS cert code
* update tests
* Add SNI support so we can have multiple certificates
* Remove commented out section from helper
* regen deep-copy
* Add tcp tls test
---------
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
* Simple API Gateway e2e test for tcp routes
* Drop DNSSans since we don't front the Gateway with a leaf cert
* WIP listener tests for api-gateway
* Return early if no routes
* Add back in leaf cert to testing
* Fix merge conflicts
* Re-add kind to setup
* Fix iteration over listener upstreams
* New tcp listener test
* Add tests for API Gateway with TCP and HTTP routes
* Move zero-route check back
* Drop generateIngressDNSSANs
* Check for chains not routes
---------
Co-authored-by: Andrew Stucki <andrew.stucki@hashicorp.com>
Fix mesh gateways incorrectly matching peer locality.
This fixes an issue where local mesh gateways use an
incorrect address when attempting to forward traffic to a
peered datacenter. Prior to this change it would use the
lan address instead of the wan if the locality matched. This
should never be done for peering, since we must route all
traffic through the remote mesh gateway.
* Fix infinite recursion on InlineCertificateConfigEntry
GetNamespace() + GetMeta() were calling themselves. This change also simplifies by removing nil-checking to match pre-existing config entries
Co-Authored-By: Andrew Stucki <3577250+andrewstucki@users.noreply.github.com>
* Add tests for inline-certificate
* Add alias for private key field on inline-certificate
* Use valid certificate + private key for inline-certificate tests
---------
Co-authored-by: Andrew Stucki <3577250+andrewstucki@users.noreply.github.com>
Prior to this PR, servers / agents would panic and crash if an ingress
or api gateway were configured to use a discovery chain that both:
1. Referenced a peered service
2. Had a mesh gateway mode of local
This could occur, because code for handling upstream watches was shared
between both connect-proxy and the gateways. As a short-term fix, this
PR ensures that the maps are always initialized for these gateway services.
This PR also wraps the proxycfg execution and service
registration calls with recover statements to ensure that future issues
like this do not put the server into an unrecoverable state.
* [API Gateway] Add integration test for conflicted TCP listeners
* [API Gateway] Update simple test to leverage intentions and multiple listeners
* Fix broken unit test
* [API Gateway] Add integration test for HTTP routes
* [API Gateway] Add integration test for conflicted TCP listeners
* [API Gateway] Update simple test to leverage intentions and multiple listeners
* Fix broken unit test
* PR suggestions
Prior to this commit, secondary datacenters could not be initialized
as peering acceptors if ACLs were enabled. This is due to the fact that
internal server-to-server API calls would fail because the management
token was not generated. This PR makes it so that both primary and
secondary datacenters generate their own management token whenever
a leader is elected in their respective clusters.
* Stub proxycfg handler for API gateway
* Add Service Kind constants/handling for API Gateway
* Begin stubbing for SDS
* Add new Secret type to xDS order of operations
* Continue stubbing of SDS
* Iterate on proxycfg handler for API gateway
* Handle BoundAPIGateway config entry subscription in proxycfg-glue
* Add API gateway to config snapshot validation
* Add API gateway to config snapshot clone, leaf, etc.
* Subscribe to bound route + cert config entries on bound-api-gateway
* Track routes + certs on API gateway config snapshot
* Generate DeepCopy() for types used in watch.Map
* Watch all active references on api-gateway, unwatch inactive
* Track loading of initial bound-api-gateway config entry
* Use proper proto package for SDS mapping
* Use ResourceReference instead of ServiceName, collect resources
* Fix typo, add + remove TODOs
* Watch discovery chains for TCPRoute
* Add TODO for updating gateway services for api-gateway
* make proto
* Regenerate deep-copy for proxycfg
* Set datacenter on upstream ID from query source
* Watch discovery chains for http-route service backends
* Add ServiceName getter to HTTP+TCP Service structs
* Clean up unwatched discovery chains on API Gateway
* Implement watch for ingress leaf certificate
* Collect upstreams on http-route + tcp-route updates
* Remove unused GatewayServices update handler
* Remove unnecessary gateway services logic for API Gateway
* Remove outdate TODO
* Use .ToIngress where appropriate, including TODO for cleaning up
* Cancel before returning error
* Remove GatewayServices subscription
* Add godoc for handlerAPIGateway functions
* Update terminology from Connect => Consul Service Mesh
Consistent with terminology changes in https://github.com/hashicorp/consul/pull/12690
* Add missing TODO
* Remove duplicate switch case
* Rerun deep-copy generator
* Use correct property on config snapshot
* Remove unnecessary leaf cert watch
* Clean up based on code review feedback
* Note handler properties that are initialized but set elsewhere
* Add TODO for moving helper func into structs pkg
* Update generated DeepCopy code
* gofmt
* Begin stubbing for SDS
* Start adding tests
* Remove second BoundAPIGateway case in glue
* TO BE PICKED: fix formatting of str
* WIP
* Fix merge conflict
* Implement HTTP Route to Discovery Chain config entries
* Stub out function to create discovery chain
* Add discovery chain merging code (#16131)
* Test adding TCP and HTTP routes
* Add some tests for the synthesizer
* Run go mod tidy
* Pairing with N8
* Run deep copy
* Clean up GatewayChainSynthesizer
* Fix missing assignment of BoundAPIGateway topic
* Separate out synthesizeChains and toIngressTLS
* Fix build errors
* Ensure synthesizer skips non-matching routes by protocol
* Rebase on N8s work
* Generate DeepCopy() for API gateway listener types
* Improve variable name
* Regenerate DeepCopy() code
* Fix linting issue
* fix protobuf import
* Fix more merge conflict errors
* Fix synthesize test
* Run deep copy
* Add URLRewrite to proto
* Update agent/consul/discoverychain/gateway_tcproute.go
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
* Remove APIGatewayConfigEntry that was extra
* Error out if route kind is unknown
* Fix formatting errors in proto
---------
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
Co-authored-by: Andrew Stucki <andrew.stucki@hashicorp.com>
* Fix detecting when a route doesn't bind to a gateway because it's already bound
* Clean up status setting code
* rework binding a bit
* More cleanup
* Flatten all files
* Fix up docstrings
* Stub proxycfg handler for API gateway
* Add Service Kind constants/handling for API Gateway
* Begin stubbing for SDS
* Add new Secret type to xDS order of operations
* Continue stubbing of SDS
* Iterate on proxycfg handler for API gateway
* Handle BoundAPIGateway config entry subscription in proxycfg-glue
* Add API gateway to config snapshot validation
* Add API gateway to config snapshot clone, leaf, etc.
* Subscribe to bound route + cert config entries on bound-api-gateway
* Track routes + certs on API gateway config snapshot
* Generate DeepCopy() for types used in watch.Map
* Watch all active references on api-gateway, unwatch inactive
* Track loading of initial bound-api-gateway config entry
* Use proper proto package for SDS mapping
* Use ResourceReference instead of ServiceName, collect resources
* Fix typo, add + remove TODOs
* Watch discovery chains for TCPRoute
* Add TODO for updating gateway services for api-gateway
* make proto
* Regenerate deep-copy for proxycfg
* Set datacenter on upstream ID from query source
* Watch discovery chains for http-route service backends
* Add ServiceName getter to HTTP+TCP Service structs
* Clean up unwatched discovery chains on API Gateway
* Implement watch for ingress leaf certificate
* Collect upstreams on http-route + tcp-route updates
* Remove unused GatewayServices update handler
* Remove unnecessary gateway services logic for API Gateway
* Remove outdate TODO
* Use .ToIngress where appropriate, including TODO for cleaning up
* Cancel before returning error
* Remove GatewayServices subscription
* Add godoc for handlerAPIGateway functions
* Update terminology from Connect => Consul Service Mesh
Consistent with terminology changes in https://github.com/hashicorp/consul/pull/12690
* Add missing TODO
* Remove duplicate switch case
* Rerun deep-copy generator
* Use correct property on config snapshot
* Remove unnecessary leaf cert watch
* Clean up based on code review feedback
* Note handler properties that are initialized but set elsewhere
* Add TODO for moving helper func into structs pkg
* Update generated DeepCopy code
* gofmt
* Generate DeepCopy() for API gateway listener types
* Improve variable name
* Regenerate DeepCopy() code
* Fix linting issue
* Temporarily remove the secret type from resource generation
This endpoint shows total services, connect service instances and
billable service instances in the local datacenter or globally. Billable
instances = total service instances - connect services - consul server instances.
* Add additional controller implementations
* remove additional interface
* Fix comparison checks and mark unused contexts
* Switch to time.Now().UTC()
* Add a pointer helper for shadowing loop variables
* Extract anonymous functions for readability
* clean up logging
* Add Type to the Condition proto
* Update some comments and add additional space for readability
* Address PR feedback
* Fix up dirty checks and change to pointer receiver
remove redundant vault api retry logic
We upgraded Vault API module version to a version that has built-in
retry logic. So this code is no longer necessary.
Also add mention of re-configuring the provider in comments.
* remove legacy tokens
* remove lingering legacy token references from docs
* update language and naming for token secrets and accessor IDs
* updates all tokenID references to clarify accessorID
* remove token type references and lookup tokens by accessorID index
* remove unnecessary constants
* replace additional tokenID param names
* Add warning info for deprecated -id parameter
Co-authored-by: Paul Glass <pglass@hashicorp.com>
* Update field comment
Co-authored-by: Paul Glass <pglass@hashicorp.com>
---------
Co-authored-by: Paul Glass <pglass@hashicorp.com>
* feat: calculate retry wait time with exponential back-off
* test: add test for getWaitTime method
* feat: enforce random jitter between min value from previous iteration and current
* extract randomStagger to simplify tests and use Milliseconds to avoid float math.
* rename variables
* add test and rename comment
---------
Co-authored-by: Poonam Jadhav <poonam.jadhav@hashicorp.com>
Ensure nothing in the troubleshoot go module depends on consul's top level module. This is so we can import troubleshoot into consul-k8s and not import all of consul.
* turns troubleshoot into a go module [authored by @curtbushko]
* gets the envoy protos into the troubleshoot module [authored by @curtbushko]
* adds a new go module `envoyextensions` which has xdscommon and extensioncommon folders that both the xds package and the troubleshoot package can import
* adds testing and linting for the new go modules
* moves the unit tests in `troubleshoot/validateupstream` that depend on proxycfg/xds into the xds package, with a comment describing why those tests cannot be in the troubleshoot package
* fixes all the imports everywhere as a result of these changes
Co-authored-by: Curt Bushko <cbushko@gmail.com>
fix goroutine leak in renew testing
Test overwrote the stopWatcher() function variable for the test without
keeping and calling the original value. The original value is the
function that stops the goroutine... so it needs to be called.
* Add Peer field to service-defaults upstream overrides.
* add api changes, compat mode for service default overrides
* Fixes based on testing
---------
Co-authored-by: DanStough <dan.stough@hashicorp.com>
Use only the agent token for deregistration during anti-entropy
The previous behavior had the agent attempt to use the "service" token
(i.e. from the `token` field in a service definition file), and if that
was not set then it would use the agent token.
The previous behavior was problematic because, if the service token had
been deleted, the deregistration request would fail. The agent would
retry the deregistration during each anti-entropy sync, and the
situation would never resolve.
The new behavior is to only/always use the agent token for service and
check deregistration during anti-entropy. This approach is:
* Simpler: No fallback logic to try different tokens
* Faster (slightly): No time spent attempting the service token
* Correct: The agent token is able to deregister services on that
agent's node, because:
* node:write permissions allow deregistration of services/checks on
that node.
* The agent token must have node:write permission, or else the agent
is not be able to (de)register itself into the catalog
Co-authored-by: Vesa Hagström <weeezes@gmail.com>
* Stub Config Entries for Consul Native API Gateway (#15644)
* Add empty InlineCertificate struct and protobuf
* apigateway stubs
* new files
* Stub HTTPRoute in api pkg
* checkpoint
* Stub HTTPRoute in structs pkg
* Simplify api.APIGatewayConfigEntry to be consistent w/ other entries
* Update makeConfigEntry switch, add docstring for HTTPRouteConfigEntry
* Add TCPRoute to MakeConfigEntry, return unique Kind
* proto generated files
* Stub BoundAPIGatewayConfigEntry in agent
Since this type is only written by a controller and read by xDS, it doesn't need to be defined in the `api` pkg
* Add RaftIndex to APIGatewayConfigEntry stub
* Add new config entry kinds to validation allow-list
* Add RaftIndex to other added config entry stubs
* fix panic
* Update usage metrics assertions to include new cfg entries
* Regenerate proto w/ Go 1.19
* Run buf formatter on config_entry.proto
* Add Meta and acl.EnterpriseMeta to all new ConfigEntry types
* Remove optional interface method Warnings() for now
Will restore later if we wind up needing it
* Remove unnecessary Services field from added config entry types
* Implement GetMeta(), GetEnterpriseMeta() for added config entry types
* Add meta field to proto, name consistently w/ existing config entries
* Format config_entry.proto
* Add initial implementation of CanRead + CanWrite for new config entry types
* Add unit tests for decoding of new config entry types
* Add unit tests for parsing of new config entry types
* Add unit tests for API Gateway config entry ACLs
* Return typed PermissionDeniedError on BoundAPIGateway CanWrite
* Add unit tests for added config entry ACLs
* Add BoundAPIGateway type to AllConfigEntryKinds
* Return proper kind from BoundAPIGateway
* Add docstrings for new config entry types
* Add missing config entry kinds to proto def
* Update usagemetrics_oss_test.go
* Use utility func for returning PermissionDeniedError
* Add BoundAPIGateway to proto def
Co-authored-by: Sarah Alsmiller <sarah.alsmiller@hashicorp.com>
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
* Add APIGateway validation
* Fix comment
* Add additional validations
* Add cert ref validation
* Add protobuf definitions
* Tabs to spaces
* Fix up field types
* Add API structs
* Move struct fields around a bit
* EventPublisher subscriptions for Consul Native API Gateway (#15757)
* Create new event topics in subscribe proto
* Add tests for PBSubscribe func
* Make configs singular, add all configs to PBToStreamSubscribeRequest
* Add snapshot methods
* Add config_entry_events tests
* Add config entry kind to topic for new configs
* Add unit tests for snapshot methods
* Start adding integration test
* Test using the new controller code
* Update agent/consul/state/config_entry_events.go
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
* Check value of error
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
* Add controller stubs for API Gateway (#15837)
* update initial stub implementation
* move files, clean up mutex references
* Remove embed, use idiomatic names for constructors
* Remove stray file introduced in merge
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
* Initial server-side and proto defs
* drop trailing whitespace
* Add APIGateway validation (#15847)
* Add APIGateway validation
* Fix comment
* Add additional validations
* Add cert ref validation
* Add protobuf definitions
* Tabs to spaces
* Fix up field types
* Add API structs
* Move struct fields around a bit
* APIGateway InlineCertificate validation (#15856)
* Add APIGateway validation
* Add additional validations
* Add protobuf definitions
* Tabs to spaces
* Add API structs
* Move struct fields around a bit
* Add validation for InlineCertificate
* Fix ACL test
* APIGateway BoundAPIGateway validation (#15858)
* Add APIGateway validation
* Fix comment
* Add additional validations
* Add cert ref validation
* Add protobuf definitions
* Tabs to spaces
* Fix up field types
* Add API structs
* Move struct fields around a bit
* Add validation for BoundAPIGateway
* drop trailing whitespace
* APIGateway TCPRoute validation (#15855)
* Add APIGateway validation
* Fix comment
* Add additional validations
* Add cert ref validation
* Add protobuf definitions
* Tabs to spaces
* Fix up field types
* Add API structs
* Move struct fields around a bit
* Add TCPRoute normalization and validation
* Address PR feedback
* Add forgotten Status
* Add some more field docs in api package
* Fix test
* Fix bad merge
* Remove duplicate helpers
* Fix up proto defs
* Fix up stray changes
* remove extra newline
---------
Co-authored-by: Thomas Eckert <teckert@hashicorp.com>
Co-authored-by: Sarah Alsmiller <sarah.alsmiller@hashicorp.com>
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
Co-authored-by: sarahalsmiller <100602640+sarahalsmiller@users.noreply.github.com>
* Add Tproxy support to Envoy Extensions (this is needed for service to service validation)
* Add validation for Envoy configuration for an upstream service
* Use both /config_dump and /cluster to validate Envoy configuration
This is because of a bug in Envoy where the EndpointsConfigDump does not
include a cluster_name, making it impossible to match an endpoint to
verify it exists.
This removes endpoints support for builtin extensions since only the
validate plugin was using it, and it is no longer used. It also removes
test cases for endpoint validation. Endpoints validation now only occurs
in the top level test from config_dump and clusters json files.
Co-authored-by: Eric <eric@haberkorn.co>
* remove legacy tokens
* Update test comment
Co-authored-by: Paul Glass <pglass@hashicorp.com>
* fix imports
* update docs for additional CLI changes
* add test case for anonymous token
* set deprecated api fields to json ignore and fix patch errors
* update changelog to breaking-change
* fix import
* update api docs to remove legacy reference
* fix docs nav data
---------
Co-authored-by: Paul Glass <pglass@hashicorp.com>
* updated builtin extension to parse region directly from ARN
- added a unit test
- added some comments/light refactoring
* updated golden files with proper ARNs
- ARNs need to be right format now that they are being processed
* updated tests and integration tests
- removed 'region' from all EnvoyExtension arguments
- added properly formatted ARN which includes the same region found in the removed "Region" field: 'us-east-1'
* Stub out bind code
* Move into a new package and flesh out binding
* Fill in the actual binding logic
* Bind to all listeners if not specified
* Move bind code up to gateways package
* Fix resource type check
* Add UpsertRoute to listeners
* Add RemoveRoute to listener
* Implement binding as associated functions
* Pass in gateways to BindRouteToGateways
* Add a bunch of tests
* Fix hopping from one listener on a gateway to another
* Remove parents from HTTPRoute
* Apply suggestions from code review
* Fix merge conflict
* Unify binding into a single variadic function 🙌 @nathancoleman
* Remove vestigial error
* Add TODO on protocol check
* rate limit test
* Have tests for the 3 modes
* added assertions for logs and metrics
* add comments to test sections
* add check for rate limit exceeded text in log assertion section.
* fix linting error
* updating test to use KV get and put. move log assertion tolast.
* Adding logging for blocking messages in enforcing mode. refactoring tests.
* modified test description
* formatting
* Apply suggestions from code review
Co-authored-by: Dan Upton <daniel@floppy.co>
* Update test/integration/consul-container/test/ratelimit/ratelimit_test.go
Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
* expand log checking so that it ensures both logs are they when they are supposed to be and not there when they are not expected to be.
* add retry on test
* Warn once when rate limit exceed regardless of enforcing vs permissive.
* Update test/integration/consul-container/test/ratelimit/ratelimit_test.go
Co-authored-by: Dan Upton <daniel@floppy.co>
Co-authored-by: Dan Upton <daniel@floppy.co>
Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
* Stub Config Entries for Consul Native API Gateway (#15644)
* Add empty InlineCertificate struct and protobuf
* apigateway stubs
* Stub HTTPRoute in api pkg
* Stub HTTPRoute in structs pkg
* Simplify api.APIGatewayConfigEntry to be consistent w/ other entries
* Update makeConfigEntry switch, add docstring for HTTPRouteConfigEntry
* Add TCPRoute to MakeConfigEntry, return unique Kind
* Stub BoundAPIGatewayConfigEntry in agent
* Add RaftIndex to APIGatewayConfigEntry stub
* Add new config entry kinds to validation allow-list
* Add RaftIndex to other added config entry stubs
* Update usage metrics assertions to include new cfg entries
* Add Meta and acl.EnterpriseMeta to all new ConfigEntry types
* Remove unnecessary Services field from added config entry types
* Implement GetMeta(), GetEnterpriseMeta() for added config entry types
* Add meta field to proto, name consistently w/ existing config entries
* Format config_entry.proto
* Add initial implementation of CanRead + CanWrite for new config entry types
* Add unit tests for decoding of new config entry types
* Add unit tests for parsing of new config entry types
* Add unit tests for API Gateway config entry ACLs
* Return typed PermissionDeniedError on BoundAPIGateway CanWrite
* Add unit tests for added config entry ACLs
* Add BoundAPIGateway type to AllConfigEntryKinds
* Return proper kind from BoundAPIGateway
* Add docstrings for new config entry types
* Add missing config entry kinds to proto def
* Update usagemetrics_oss_test.go
* Use utility func for returning PermissionDeniedError
* EventPublisher subscriptions for Consul Native API Gateway (#15757)
* Create new event topics in subscribe proto
* Add tests for PBSubscribe func
* Make configs singular, add all configs to PBToStreamSubscribeRequest
* Add snapshot methods
* Add config_entry_events tests
* Add config entry kind to topic for new configs
* Add unit tests for snapshot methods
* Start adding integration test
* Test using the new controller code
* Update agent/consul/state/config_entry_events.go
* Check value of error
* Add controller stubs for API Gateway (#15837)
* update initial stub implementation
* move files, clean up mutex references
* Remove embed, use idiomatic names for constructors
* Remove stray file introduced in merge
* Add APIGateway validation (#15847)
* Add APIGateway validation
* Add additional validations
* Add cert ref validation
* Add protobuf definitions
* Fix up field types
* Add API structs
* Move struct fields around a bit
* APIGateway InlineCertificate validation (#15856)
* Add APIGateway validation
* Add additional validations
* Add protobuf definitions
* Tabs to spaces
* Add API structs
* Move struct fields around a bit
* Add validation for InlineCertificate
* Fix ACL test
* APIGateway BoundAPIGateway validation (#15858)
* Add APIGateway validation
* Add additional validations
* Add cert ref validation
* Add protobuf definitions
* Fix up field types
* Add API structs
* Move struct fields around a bit
* Add validation for BoundAPIGateway
* APIGateway TCPRoute validation (#15855)
* Add APIGateway validation
* Add additional validations
* Add cert ref validation
* Add protobuf definitions
* Fix up field types
* Add API structs
* Add TCPRoute normalization and validation
* Add forgotten Status
* Add some more field docs in api package
* Fix test
* Format imports
* Rename snapshot test variable names
* Add plumbing for Native API GW Subscriptions (#16003)
Co-authored-by: Sarah Alsmiller <sarah.alsmiller@hashicorp.com>
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
Co-authored-by: sarahalsmiller <100602640+sarahalsmiller@users.noreply.github.com>
Co-authored-by: Andrew Stucki <andrew.stucki@hashicorp.com>
Fix configuration merging for implicit tproxy upstreams.
Change the merging logic so that the wildcard upstream has correct proxy-defaults
and service-defaults values combined into it. It did not previously merge all fields,
and the wildcard upstream did not exist unless service-defaults existed (it ignored
proxy-defaults, essentially).
Change the way we fetch upstream configuration in the xDS layer so that it falls back
to the wildcard when no matching upstream is found. This is what allows implicit peer
upstreams to have the correct "merged" config.
Change proxycfg to always watch local mesh gateway endpoints whenever a peer upstream
is found. This simplifies the logic so that we do not have to inspect the "merged"
configuration on peer upstreams to extract the mesh gateway mode.
Previously, we'd begin a session with the xDS concurrency limiter
regardless of whether the proxy was registered in the catalog or in
the server's local agent state.
This caused problems for users who run `consul connect envoy` directly
against a server rather than a client agent, as the server's locally
registered proxies wouldn't be included in the limiter's capacity.
Now, the `ConfigSource` is responsible for beginning the session and we
only do so for services in the catalog.
Fixes: https://github.com/hashicorp/consul/issues/15753
Enforce lowercase peer names.
Prior to this change peer names could be mixed case.
This can cause issues, as peer names are used as DNS labels
in various locations. It also caused issues with envoy
configuration.
* Protobuf Modernization
Remove direct usage of golang/protobuf in favor of google.golang.org/protobuf
Marshallers (protobuf and json) needed some changes to account for different APIs.
Moved to using the google.golang.org/protobuf/types/known/* for the well known types including replacing some custom Struct manipulation with whats available in the structpb well known type package.
This also updates our devtools script to install protoc-gen-go from the right location so that files it generates conform to the correct interfaces.
* Fix go-mod-tidy make target to work on all modules
- Fixes a panic when Operation.SourceAddr is nil (internal net/rpc calls)
- Adds proper HTTP response codes (429 and 503) for rate limit errors
- Makes the error messages clearer
- Enables automatic retries for rate-limit errors in the net/rpc stack
* inject logger and create logdrop sink
* init sink with an empty struct instead of nil
* wrap a logger instead of a sink and add a discard logger to avoid double logging
* fix compile errors
* fix linter errors
* Fix bug where log arguments aren't properly formatted
* Move log sink construction outside of handler
* Add prometheus definition and docs for log drop counter
Co-authored-by: Daniel Upton <daniel@floppy.co>
Fixes a bug introduced by #15346 where we'd always require an ACL
token even if ACLs were disabled because we were erroneously
treating `nil` identity as anonymous.
This is the OSS portion of enterprise PR 3822.
Adds a custom gRPC balancer that replicates the router's server cycling
behavior. Also enables automatic retries for RESOURCE_EXHAUSTED errors,
which we now get for free.
Paul Glass
Michael Zalimeni
sarahalsmiller
R.B. Boyer
Matt Keeler
Ronald
Kyle Havlovitz
Connor
Dan Bond
wangxinyi7
Semir Patel
Dan Upton
Hans Hasselberg
Eric Haberkorn
Chris Thain
Derek Menteer
cskh
Freddy
John Eikenberry
Nathan Coleman
Poonam Jadhav
John Landa
John Maguire
Michael Wilkerson
hashicorp-copywrite[bot]
John Murret
Luke Kysow
Dhia Ayachi
Chris S. Kim
Nitya Dhanushkodi
Melisa Griffin
Andrew Stucki
Ashvitha
Paul Banks
Dan Stough
Thomas Eckert
skpratt
Nick Irvine
Florian Apolloner