* Give descriptive error if auth method not found
Previously during a `consul login -method=blah`, if the auth method was not found, the
error returned would be "ACL not found". This is potentially confusing
because there may be many different ACLs involved in a login: the ACL of
the Consul client, perhaps the binding rule or the auth method.
Now the error will be "auth method blah not found", which is much easier
to debug.
No config entry needs a Kind field. It is only used to determine the Go type to
target. As we introduce new config entries (like this one) we can remove the kind field
and have the GetKind method return the single supported value.
In this case (similar to proxy-defaults) the Name field is also unnecessary. We always
use the same value. So we can omit the name field entirely.
The only thing that needed fixing up pertained to this section of the 1.18.x release notes:
> grpc_stats: the default value for stats_for_all_methods is switched from true to false, in order to avoid possible memory exhaustion due to an untrusted downstream sending a large number of unique method names. The previous default value was deprecated in version 1.14.0. This only changes the behavior when the value is not set. The previous behavior can be used by setting the value to true. This behavior change by be overridden by setting runtime feature envoy.deprecated_features.grpc_stats_filter_enable_stats_for_all_methods_by_default.
For now to maintain status-quo I'm explicitly setting `stats_for_all_methods=true` in all versions to avoid relying upon the default.
Additionally the naming of the emitted metrics for these gRPC requests changed slightly so the integration test assertions for `case-grpc` needed adjusting.
This adds support for the Incremental xDS protocol when using xDS v3. This is best reviewed commit-by-commit and will not be squashed when merged.
Union of all commit messages follows to give an overarching summary:
xds: exclusively support incremental xDS when using xDS v3
Attempts to use SoTW via v3 will fail, much like attempts to use incremental via v2 will fail.
Work around a strange older envoy behavior involving empty CDS responses over incremental xDS.
xds: various cleanups and refactors that don't strictly concern the addition of incremental xDS support
Dissolve the connectionInfo struct in favor of per-connection ResourceGenerators instead.
Do a better job of ensuring the xds code uses a well configured logger that accurately describes the connected client.
xds: pull out checkStreamACLs method in advance of a later commit
xds: rewrite SoTW xDS protocol tests to use protobufs rather than hand-rolled json strings
In the test we very lightly reuse some of the more boring protobuf construction helper code that is also technically under test. The important thing of the protocol tests is testing the protocol. The actual inputs and outputs are largely already handled by the xds golden output tests now so these protocol tests don't have to do double-duty.
This also updates the SoTW protocol test to exclusively use xDS v2 which is the only variant of SoTW that will be supported in Consul 1.10.
xds: default xds.Server.AuthCheckFrequency at use-time instead of construction-time
* Use proxy outbound port from TransparentProxyConfig if provided
* If -proxy-id is provided to the redirect-traffic command, exclude any listener ports
from inbound traffic redirection. This includes envoy_prometheus_bind_addr,
envoy_stats_bind_addr, and the ListenerPort from the Expose configuration.
* Allow users to provide additional inbound and outbound ports, outbound CIDRs
and additional user IDs to be excluded from traffic redirection.
This affects both the traffic-redirect command and the iptables SDK package.
This config entry is being renamed primarily because in k8s the name
cluster could be confusing given that the config entry applies across
federated datacenters.
Additionally, this config entry will only apply to Consul as a service
mesh, so the more generic "cluster" name is not needed.
* CLI: Add support for reading internal raft snapshots to snapshot inspect
* Add snapshot inspect test for raw state files
* Add changelog entry
* Update .changelog/10089.txt
This way we avoid serializing these when empty. Otherwise users of the
latest version of the api submodule cannot interact with older versions
of Consul, because a new api client would send keys that the older Consul
doesn't recognize yet.
This PR replaces the original boolean used to configure transparent
proxy mode. It was replaced with a string mode that can be set to:
- "": Empty string is the default for when the setting should be
defaulted from other configuration like config entries.
- "direct": Direct mode is how applications originally opted into the
mesh. Proxy listeners need to be dialed directly.
- "transparent": Transparent mode enables configuring Envoy as a
transparent proxy. Traffic must be captured and redirected to the
inbound and outbound listeners.
This PR also adds a struct for transparent proxy specific configuration.
Initially this is not stored as a pointer. Will revisit that decision
before GA.
* Add new consul connect redirect-traffic command for applying traffic redirection rules when Transparent Proxy is enabled.
* Add new iptables package for applying traffic redirection rules with iptables.
This is done because after removing ID and NodeName from
ServiceConfigRequest we will no longer know whether a request coming in
is for a Consul client earlier than v1.10.
Allows setting -prometheus-backend-port to configure the cluster
envoy_prometheus_bind_addr points to.
Allows setting -prometheus-scrape-path to configure which path
envoy_prometheus_bind_addr exposes metrics on.
-prometheus-backend-port is used by the consul-k8s metrics merging feature, to
configure envoy_prometheus_bind_addr to point to the merged metrics
endpoint that combines Envoy and service metrics so that one set of
annotations on a Pod can scrape metrics from the service and it's Envoy
sidecar.
-prometheus-scrape-path is used to allow configurability of the path
where prometheus metrics are exposed on envoy_prometheus_bind_addr.
Note that this does NOT upgrade to xDS v3. That will come in a future PR.
Additionally:
- Ignored staticcheck warnings about how github.com/golang/protobuf is deprecated.
- Shuffled some agent/xds imports in advance of a later xDS v3 upgrade.
- Remove support for envoy 1.13.x but don't add in 1.17.x yet. We have to wait until the xDS v3 support is added in a follow-up PR.
Fixes#8425
Currently when data is imported via `consul kv import` it overwrites
keys under the root key. Since `consul kv export` can retrieve data for
the given prefix, i.e. part of the KV tree, importing it under root may
be not what users want.
To mirror prefix behavior from export this PR adds prefix feature to the
import command that adds prefix to all keys that are imported.
This allows setting ForceWithoutCrossSigning when reconfiguring the CA
for any provider, in order to forcibly move to a new root in cases where
the old provider isn't reachable or able to cross-sign for whatever
reason.
This commit makes a number of changes that should make
TestLoad_FullConfig easier to work with, and make the test more like
real world scenarios.
* use separate files in testdata/ dir to store the config source.
Separate files are much easier to edit because editors can syntax
highlight json/hcl, and it makes strings easier to find. Previously
trying to find strings would match strings used in other tests.
* use the exported config.Load interface instead of internal NewBuilder
and BuildAndValidate.
* remove the tail config overrides, which are only necessary with
nonZero works.
This commit reduces the interface to Load() a bit, in preparation for
unexporting NewBuilder and having everything call Load.
The three arguments are reduced to a single argument by moving the other
two into the options struct.
The three return values are reduced to two by moving the RuntimeConfig
and Warnings into a LoadResult struct.
The method is only used in tests, and only exists for legacy calls.
There was one other package which used this method in tests. Export
the AddServiceRequest and a couple of its fields so the new function can
be used in those tests.
This PR is based on the previous work by @snuggie12 in PR #6825. It adds the command consul intention list to list all available intentions. The list functionality for intentions seems a bit overdue as it's just very handy. The web UI cannot list intentions outside of the default namespace, and using the API is sometimes not the friendliest option. ;)
I cherry picked snuggie12's commits who did most of the heavy lifting (thanks again @snuggie12 for your great work!). The changes in the original commit mostly still worked on the current HEAD. On top of that I added support for namespaces and fixed the docs as they are managed differently today. Also the requested changes related to the "Connect" references in the original PRs have been addressed.
Fixes#5652
Co-authored-by: Matt Hoey <mhoey05@jcu.edu>
Add a skip condition to all tests slower than 100ms.
This change was made using `gotestsum tool slowest` with data from the
last 3 CI runs of master.
See https://github.com/gotestyourself/gotestsum#finding-and-skipping-slow-tests
With this change:
```
$ time go test -count=1 -short ./agent
ok github.com/hashicorp/consul/agent 0.743s
real 0m4.791s
$ time go test -count=1 -short ./agent/consul
ok github.com/hashicorp/consul/agent/consul 4.229s
real 0m8.769s
```
This PR updates the tags that we generate for Envoy stats.
Several of these come with breaking changes, since we can't keep two stats prefixes for a filter.
* ci: stop building darwin/386 binaries
Go 1.15 drops support for 32-bit binaries on Darwin https://golang.org/doc/go1.15#darwin
* tls: ConnectionState::NegotiatedProtocolIsMutual is deprecated in Go 1.15, this value is always true
* correct error messages that changed slightly
* Completely regenerate some TLS test data
Co-authored-by: R.B. Boyer <rb@hashicorp.com>
If one isn't included, then the nil check in the formatter never fails due to an empty slice being passed in, which causes the kv output to always get printed.
Extend Consul’s intentions model to allow for request-based access control enforcement for HTTP-like protocols in addition to the existing connection-based enforcement for unspecified protocols (e.g. tcp).
- Upgrade the ConfigEntry.ListAll RPC to be kind-aware so that older
copies of consul will not see new config entries it doesn't understand
replicate down.
- Add shim conversion code so that the old API/CLI method of interacting
with intentions will continue to work so long as none of these are
edited via config entry endpoints. Almost all of the read-only APIs will
continue to function indefinitely.
- Add new APIs that operate on individual intentions without IDs so that
the UI doesn't need to implement CAS operations.
- Add a new serf feature flag indicating support for
intentions-as-config-entries.
- The old line-item intentions way of interacting with the state store
will transparently flip between the legacy memdb table and the config
entry representations so that readers will never see a hiccup during
migration where the results are incomplete. It uses a piece of system
metadata to control the flip.
- The primary datacenter will begin migrating intentions into config
entries on startup once all servers in the datacenter are on a version
of Consul with the intentions-as-config-entries feature flag. When it is
complete the old state store representations will be cleared. We also
record a piece of system metadata indicating this has occurred. We use
this metadata to skip ALL of this code the next time the leader starts
up.
- The secondary datacenters continue to run the old intentions
replicator until all servers in the secondary DC and primary DC support
intentions-as-config-entries (via serf flag). Once this condition it met
the old intentions replicator ceases.
- The secondary datacenters replicate the new config entries as they are
migrated in the primary. When they detect that the primary has zeroed
it's old state store table it waits until all config entries up to that
point are replicated and then zeroes its own copy of the old state store
table. We also record a piece of system metadata indicating this has
occurred. We use this metadata to skip ALL of this code the next time
the leader starts up.
With this change, Agent.New() accepts many of the dependencies instead
of creating them in New. Accepting fully constructed dependencies from
a constructor makes the type easier to test, and easier to change.
There are still a number of dependencies created in Start() which can
be addressed in a follow up.
When consul is restarted and an envoy that had already sent
DiscoveryRequests to the previous consul process sends a request to the
new process it doesn't respect the setting and never populates
DiscoveryRequest.Node for the life of the new consul process due to this
bug: https://github.com/envoyproxy/envoy/issues/9682Fixes#8430
Now that it is no longer used, we can remove this unnecessary field. This is a pre-step in cleanup up RuntimeConfig->Consul.Config, which is a pre-step to adding a gRPCHandler component to Server for streaming.
Removing this field also allows us to remove one of the return values from logging.Setup.
Related changes:
- hard-fail the xDS connection attempt if the envoy version is known to be too old to be supported
- remove the RouterMatchSafeRegex proxy feature since all supported envoy versions have it
- stop using --max-obj-name-len (due to: envoyproxy/envoy#11740)
Previously, the envoy bootstrap config would blindly copy the self_admin
cluster into the list of static clusters when configuring either
ReadyBindAddr, PrometheusBindAddr, or StatsBindAddr.
Since ingress gateways always configure the ReadyBindAddr property,
users ran into this case much more often than previously.
This provides a user with a better experience, knowing that the command
worked appropriately. The output of the write/delete CLI commands are
not going to be used in a bash script, in fact previously a success
provided no ouput, so we do not have to worry about spurious text being
injected into bash pipelines.
Highlights:
- add new endpoint to query for intentions by exact match
- using this endpoint from the CLI instead of the dump+filter approach
- enforcing that OSS can only read/write intentions with a SourceNS or
DestinationNS field of "default".
- preexisting OSS intentions with now-invalid namespace fields will
delete those intentions on initial election or for wildcard namespaces
an attempt will be made to downgrade them to "default" unless one
exists.
- also allow the '-namespace' CLI arg on all of the intention subcommands
- update lots of docs
There are a couple of things in here.
First, just like auto encrypt, any Cluster.AutoConfig RPC will implicitly use the less secure RPC mechanism.
This drastically modifies how the Consul Agent starts up and moves most of the responsibilities (other than signal handling) from the cli command and into the Agent.
All commands which read config (agent, services, and validate) will now
print warnings when one of the config files is skipped because it did
not match an expected format.
Also ensures that config validate prints all warnings.
A Node Identity is very similar to a service identity. Its main targeted use is to allow creating tokens for use by Consul agents that will grant the necessary permissions for all the typical agent operations (node registration, coordinate updates, anti-entropy).
Half of this commit is for golden file based tests of the acl token and role cli output. Another big updates was to refactor many of the tests in agent/consul/acl_endpoint_test.go to use the same style of tests and the same helpers. Besides being less boiler plate in the tests it also uses a common way of starting a test server with ACLs that should operate without any warnings regarding deprecated non-uuid master tokens etc.
The nil value was never used. We can avoid a bunch of complications by
making the field a string value instead of a pointer.
This change is in preparation for fixing a silent config failure.
Flags is an overloaded term in this context. It generally is used to
refer to command line flags. This struct, however, is a data object
used as input to the construction.
It happens to be partially populated by command line flags, but
otherwise has very little to do with them.
Renaming this struct should make the actual responsibility of this struct
more obvious, and remove the possibility that it is confused with
command line flags.
This change is in preparation for adding additional fields to
BuilderOpts.
This field was populated for one reason, to test that it was empty.
Of all the callers, only a single one used this functionality. The rest
constructed a `Flags{}` struct which did not set Args.
I think this shows that the logic was in the wrong place. Only the agent
command needs to care about validating the args.
This commit removes the field, and moves the logic to the one caller
that cares.
Also fix some comments.
Currently opaque config blocks (config entries, and CA provider config) are
modified by PatchSliceOfMaps, making it impossible for these opaque
config sections to contain slices of maps.
In order to fix this problem, any lazy-decoding of these blocks needs to support
weak decoding of []map[string]interface{} to a struct type before
PatchSliceOfMaps is replaces. This is necessary because these config
blobs are persisted, and during an upgrade an older version of Consul
could read one of the new configuration values, which would cause an error.
To support the upgrade path, this commit first introduces the new hooks
for weak decoding of []map[string]interface{} and uses them only in the
lazy-decode paths. That way, in a future release, new style
configuration will be supported by the older version of Consul.
This decode hook has a number of advantages:
1. It no longer panics. It allows mapstructure to report the error
2. It no longer requires the user to declare which fields are slices of
structs. It can deduce that information from the 'to' value.
3. It will make it possible to preserve opaque configuration, allowing
for structured opaque config.
Three of the checks are temporarily disabled to limit the size of the
diff, and allow us to enable all the other checks in CI.
In a follow up we can fix the issues reported by the other checks one
at a time, and enable them.
* Standardize support for Tagged and BindAddresses in Ingress Gateways
This updates the TaggedAddresses and BindAddresses behavior for Ingress
to match Mesh/Terminating gateways. The `consul connect envoy` command
now also allows passing an address without a port for tagged/bind
addresses.
* Update command/connect/envoy/envoy.go
Co-authored-by: Freddy <freddygv@users.noreply.github.com>
* PR comments
* Check to see if address is an actual IP address
* Update agent/xds/listeners.go
Co-authored-by: Freddy <freddygv@users.noreply.github.com>
* fix whitespace
Co-authored-by: Chris Piraino <cpiraino@hashicorp.com>
Co-authored-by: Freddy <freddygv@users.noreply.github.com>
Some of these problems are minor (unused vars), but others are real bugs (ignored errors).
Co-authored-by: Matt Keeler <mkeeler@users.noreply.github.com>
Daniel Nephin
Mark Anderson
Luke Kysow
R.B. Boyer
Iryna Shustava
Freddy
Paul Banks
freddygv
freddygv
Hans Hasselberg
woz5999
Kyle Havlovitz
Nitya Dhanushkodi
R.B. Boyer
Alex Dzyoba
Matt Keeler
Michael Hofer
Mike Morris
Matt Keeler
Joel Watson
s-christoff
Blake Covarrubias
Ryan Ooi
Juliano Martinez
Tim Arenz
Marc Billow
Chris Piraino
Alvin Huang
Kit Patella
Jono Sosulska