Transparent proxies can set up filter chains that allow direct
connections to upstream service instances. Services that can be dialed
directly are stored in the PassthroughUpstreams map of the proxycfg
snapshot.
Previously these addresses were not being cleaned up based on new
service health data. The list of addresses associated with an upstream
service would only ever grow.
As services scale up and down, eventually they will have instances
assigned to an IP that was previously assigned to a different service.
When IP addresses are duplicated across filter chain match rules the
listener config will be rejected by Envoy.
This commit updates the proxycfg snapshot management so that passthrough
addresses can get cleaned up when no longer associated with a given
upstream.
There is still the possibility of a race condition here where due to
timing an address is shared between multiple passthrough upstreams.
That concern is mitigated by #12195, but will be further addressed
in a follow-up.
Fixes#11876
This enforces that multiple xDS mutations are not issued on the same ADS connection at once, so that we can 100% control the order that they are applied. The original code made assumptions about the way multiple in-flight mutations were applied on the Envoy side that was incorrect.
This commit makes two changes to the validation.
Previously we would call this validation in GenerateRoot, which happens
both on initialization (when a follower becomes leader), and when a
configuration is updated. We only want to do this validation during
config update so the logic was moved to the UpdateConfiguration
function.
Previously we would compare the config values against the actual cert.
This caused problems when the cert was created manually in Vault (not
created by Consul). Now we compare the new config against the previous
config. Using a already created CA cert should never error now.
Adding the key bit and types to the config should only error when
the previous values were not the defaults.
These two tests require debug logging enabled, because they look for log lines.
Also switched to testify assertions because the previous errors were not clear.
This test found a bug in the secondary. We were appending the root cert
to the PEM, but that cert was already appended. This was failing
validation in Vault here:
https://github.com/hashicorp/vault/blob/sdk/v0.3.0/sdk/helper/certutil/types.go#L329
Previously this worked because self signed certs have the same
SubjectKeyID and AuthorityKeyID. So having the same self-signed cert
repeated doesn't fail that check.
However with an intermediate that is not self-signed, those values are
different, and so we fail the check. A test I added in a previous commit
should show that this continues to work with self-signed root certs as
well.
This is safer than embedding two interface because there are a number of
places where we check the concrete type. If we check the concrete type
on the top-level interface it will fail. So instead expose the
ACLIdentity from a method.
This change allows us to remove one of the last remaining duplicate
resolve token methods (Server.ResolveToken).
With this change we are down to only 2, where the second one also
handles setting the default EnterpriseMeta from the token.
When a wildcard xDS type (LDS/CDS/SRDS) reconnects from a delta xDS stream,
prior to envoy `1.19.0` it would populate the `ResourceNamesSubscribe` field
with the full list of currently subscribed items, instead of simply omitting it
to infer that it wanted everything (which is what wildcard mode means).
This upstream issue was filed in envoyproxy/envoy#16063 and fixed in
envoyproxy/envoy#16153 which went out in Envoy `1.19.0` and is fixed in later
versions (later refactored in envoyproxy/envoy#16855).
This PR conditionally forces LDS/CDS to be wildcard-only even when the
connected Envoy requests a non-wildcard subscription, but only does so on
versions prior to `1.19.0`, as we should not need to do this on later versions.
This fixes the failure case as described here: #11833 (comment)
Co-authored-by: Huan Wang <fredwanghuan@gmail.com>
Now that ACLResolver is embedded we don't need ResolveTokenToIdentity on
Client and Server.
Moving ResolveTokenAndDefaultMeta to ACLResolver removes the duplicate
implementation.
set -euo pipefail
unset CDPATH
cd "$(dirname "$0")"
for f in $(git grep '\brequire := require\.New(' | cut -d':' -f1 | sort -u); do
echo "=== require: $f ==="
sed -i '/require := require.New(t)/d' $f
# require.XXX(blah) but not require.XXX(tblah) or require.XXX(rblah)
sed -i 's/\brequire\.\([a-zA-Z0-9_]*\)(\([^tr]\)/require.\1(t,\2/g' $f
# require.XXX(tblah) but not require.XXX(t, blah)
sed -i 's/\brequire\.\([a-zA-Z0-9_]*\)(\(t[^,]\)/require.\1(t,\2/g' $f
# require.XXX(rblah) but not require.XXX(r, blah)
sed -i 's/\brequire\.\([a-zA-Z0-9_]*\)(\(r[^,]\)/require.\1(t,\2/g' $f
gofmt -s -w $f
done
for f in $(git grep '\bassert := assert\.New(' | cut -d':' -f1 | sort -u); do
echo "=== assert: $f ==="
sed -i '/assert := assert.New(t)/d' $f
# assert.XXX(blah) but not assert.XXX(tblah) or assert.XXX(rblah)
sed -i 's/\bassert\.\([a-zA-Z0-9_]*\)(\([^tr]\)/assert.\1(t,\2/g' $f
# assert.XXX(tblah) but not assert.XXX(t, blah)
sed -i 's/\bassert\.\([a-zA-Z0-9_]*\)(\(t[^,]\)/assert.\1(t,\2/g' $f
# assert.XXX(rblah) but not assert.XXX(r, blah)
sed -i 's/\bassert\.\([a-zA-Z0-9_]*\)(\(r[^,]\)/assert.\1(t,\2/g' $f
gofmt -s -w $f
done
The gist here is that now we use a value-type struct proxycfg.UpstreamID
as the map key in ConfigSnapshot maps where we used to use "upstream
id-ish" strings. These are internal only and used just for bidirectional
trips through the agent cache keyspace (like the discovery chain target
struct).
For the few places where the upstream id needs to be projected into xDS,
that's what (proxycfg.UpstreamID).EnvoyID() is for. This lets us ALWAYS
inject the partition and namespace into these things without making
stuff like the golden testdata diverge.
Remove some unnecessary comments around query_blocking metric. The only
line that needs any comments in the atomic decrement.
Cleanup the block and return comments and logic. The old comment about
AbandonCh may have been relevant before, but it is expected behaviour
now.
The logic was simplified by inverting the err condition.
This helps keep the logic in blockingQuery more focused. In the future we
may have a separate struct for RPC queries which may allow us to move this
off of Server.
This safeguard should be safe to apply in general. We are already
applying it to non-blocking queries that call blockingQuery, so it
should be fine to apply it to others.
To remove the TODO, and make it more readable.
In general this reduces the scope of variables, making them easier to reason about.
It also introduces more early returns so that we can see the flow from the structure
of the function.
* xds: refactor ingress listener SDS configuration
* xds: update resolveListenerSDS call args in listeners_test
* ingress: add TLS min, max and cipher suites to GatewayTLSConfig
* xds: implement envoyTLSVersions and envoyTLSCipherSuites
* xds: merge TLS config
* xds: configure TLS parameters with ingress TLS context from leaf
* xds: nil check in resolveListenerTLSConfig validation
* xds: nil check in makeTLSParameters* functions
* changelog: add entry for TLS params on ingress config entries
* xds: remove indirection for TLS params in TLSConfig structs
* xds: return tlsContext, nil instead of ambiguous err
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
* xds: switch zero checks to types.TLSVersionUnspecified
* ingress: add validation for ingress config entry TLS params
* ingress: validate listener TLS config
* xds: add basic ingress with TLS params tests
* xds: add ingress listeners mixed TLS min version defaults precedence test
* xds: add more explicit tests for ingress listeners inheriting gateway defaults
* xds: add test for single TLS listener on gateway without TLS defaults
* xds: regen golden files for TLSVersionInvalid zero value, add TLSVersionAuto listener test
* types/tls: change TLSVersion to string
* types/tls: update TLSCipherSuite to string type
* types/tls: implement validation functions for TLSVersion and TLSCipherSuites, make some maps private
* api: add TLS params to GatewayTLSConfig, add tests
* api: add TLSMinVersion to ingress gateway config entry test JSON
* xds: switch to Envoy TLS cipher suite encoding from types package
* xds: fixup validation for TLSv1_3 min version with cipher suites
* add some kitchen sink tests and add a missing struct tag
* xds: check if mergedCfg.TLSVersion is in TLSVersionsWithConfigurableCipherSuites
* xds: update connectTLSEnabled comment
* xds: remove unsued resolveGatewayServiceTLSConfig function
* xds: add makeCommonTLSContextFromLeafWithoutParams
* types/tls: add LessThan comparator function for concrete values
* types/tls: change tlsVersions validation map from string to TLSVersion keys
* types/tls: remove unused envoyTLSCipherSuites
* types/tls: enable chacha20 cipher suites for Consul agent
* types/tls: remove insecure cipher suites from allowed config
TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256 and TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256 are both explicitly listed as insecure and disabled in the Go source.
Refs https://cs.opensource.google/go/go/+/refs/tags/go1.17.3:src/crypto/tls/cipher_suites.go;l=329-330
* types/tls: add ValidateConsulAgentCipherSuites function, make direct lookup map private
* types/tls: return all unmatched cipher suites in validation errors
* xds: check that Envoy API value matching TLS version is found when building TlsParameters
* types/tls: check that value is found in map before appending to slice in MarshalEnvoyTLSCipherSuiteStrings
* types/tls: cast to string rather than fmt.Printf in TLSCihperSuite.String()
* xds: add TLSVersionUnspecified to list of configurable cipher suites
* structs: update note about config entry warning
* xds: remove TLS min version cipher suite unconfigurable test placeholder
* types/tls: update tests to remove assumption about private map values
Co-authored-by: R.B. Boyer <rb@hashicorp.com>
`newIntermediate` is always equal to `needsNewIntermediate`, so we can
remove the extra variable and use the original directly.
Also remove the `activeRoot.ID != newActiveRoot.ID` case from an if,
because that case is already checked above, and `needsNewIntermediate` will
already be true in that case.
This condition now reads a lot better:
> Persist a new root if we did not have one before, or if generated a new intermediate.
In the previous commit the single use of this storedRoot was removed.
In this commit the original objective is completed. The
Provider.ActiveRoot is being removed because
1. the secondary should get the active root from the Consul primary DC,
not the provider, so that secondary DCs do not need to communicate
with a provider instance in a different DC.
2. so that the Provider.ActiveRoot interface can be changed without
impacting other code paths.
This method had only one caller, which always looked for the active
root. This commit moves the lookup into the method to reduce the logic
in the one caller.
This is being done in preparation for a larger change. Keeping this
separate so it is easier to see.
The `storedRootID != primaryRoots.ActiveRootID` is being removed because
these can never be different.
The `storedRootID` comes from `provider.ActiveRoot`, the
`primaryRoots.ActiveRootID` comes from the store `CARoot` from the
primary. In both cases the source of the data is the primary DC.
Technically they could be different if someone modified the provider
outside of Consul, but that would break many things, so is not a
supported flow.
If these were out of sync because of ordering of events then the
secondary will soon receive an update to `primaryRoots` and everything
will be sorted out again.
ActiveRoot should not be called from the secondary DC, because there
should not be a requirement to run the same Vault instance in a
secondary DC. SignIntermediate is called in a secondary DC, so it should
not call ActiveRoot
We would also like to change the interface of ActiveRoot so that we can
support using an intermediate cert as the primary CA in Consul. In
preparation for making that change I am reducing the number of calls to
ActiveRoot, so that there are fewer code paths to modify when the
interface changes.
This change required a change to the mockCAServerDelegate we use in
tests. It was returning the RootCert for SignIntermediate, but that is
not an accurate fake of production. In production this would also be a
separate cert.
Immediately above this line we are already appending the full list of
intermediates. The `provider.ActiveIntermediate` MUST be in this list of
intermediates because it must be available to all the other non-leader
Servers. If it was not in this list of intermediates then any proxy
that received data from a non-leader would have the wrong certs.
This is being removed now because we are planning on changing the
`Provider.ActiveIntermediate` interface, and removing these extra calls ahead of
time helps make that change easier.
Using tracing and cpu profiling I found that the majority of the time in
these test cases is spent generating a private key. We really don't need
separate private keys, so we can generate only one and use it for all
cases.
With this change the test runs much faster.
Fix the name to match the function it is testing
Remove unused code
Fix the signature, instead of returning (error, string) which should be (string, error)
accept a testing.T to emit errors.
Handle the error from encode.
Update the `/agent/check/deregister/` API endpoint to return a 404
HTTP response code when an attempt is made to de-register a check ID
that does not exist on the agent.
This brings the behavior of /agent/check/deregister/ in line with the
behavior of /agent/service/deregister/ which was changed in #10632 to
similarly return a 404 when de-registering non-existent services.
Fixes#5821
* clone the service under lock to avoid a data race
* add change log
* create a struct and copy the pointer to mutate it to avoid a data race
* fix failing test
* revert added space
* add comments, to clarify the data race.
The only function passed to SnapshotRPC today always returns a nil error, so there's no
way to exercise this bug in practice. This change is being made for correctness so that
it doesn't become a problem in the future, if we ever pass a different function to
SnapshotRPC.
Error messages related to service and check operations previously included
the following substrings:
- service %q
- check %q
From this error message, it isn't clear that the expected field is the ID for
the entity, not the name. For example, if the user has a service named test,
the error message would read 'Unknown service "test"'. This is misleading -
a service with that *name* does exist, but not with that *ID*.
The substrings above have been modified to make it clear that ID is needed,
not name:
- service with ID %q
- check with ID %q
Previously we could get into a state where discovery chain entries were
not cleaned up after the associated watch was cancelled. These changes
add handling for that case where stray chain references are encountered.
When a URL path is not found, return a non-empty message with the 404 status
code to help the user understand what went wrong. If the URL path was not
prefixed with '/v1/', suggest that may be the cause of the problem (which is a
common mistake).
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
Co-authored-by: Dan Upton <daniel@floppy.co>
This query has been incorrectly querying by accessor ID since New ACLs
were added. However, the legacy token compat allowed this to continue to
work, since it made a fallback query for the anonymousToken ID.
PR #11184 removed this legacy token query, which means that the query by
accessor ID is now the only check for the anonymous token's existence.
This PR updates the GetBySecret call to use the secret ID of the token.
These helper functions actually end up hiding important setup details
that should be visible from the test case. We already have a convenient
way of setting this config when calling newTestServerWithConfig.
I suspect one problem was that we set structs.IntermediateCertRenewInterval to 1ms, which meant
that in some cases the intermediate could renew before we stored the original value.
Another problem was that the 'wait for intermediate' loop was calling the provider.ActiveIntermediate,
but the comparison needs to use the RPC endpoint to accurately represent a user request. So
changing the 'wait for' to use the state store ensures we don't race.
Also moves the patching into a separate function.
Removes the addition of ca.CertificateTimeDriftBuffer as part of calculating halfTime. This was added
in a previous commit to attempt to fix the flake, but it did not appear to fix the problem. Adding the
time here was making the tests fail when using the shared patch
function. It's not clear to me why, but there's no reason we should be
including this time in the halfTime calculation.
Use the new verifyLearfCert to show the cert verifies with intermediates
from both sources. This required using the RPC interface so that the
leaf pem was constructed correctly.
Add IndexedCARoots.Active since that is a common operation we see in a
few places.
Previously we had a couple copies that reproduced the FSM operation.
These copies introduce risk that the test does not accurately match
production.
This PR removes the test versions of the FSM operation, and exports the
real production FSM operation so that it can be used in tests.
The consul provider tests did need to change because of this. Previously
we would return a hardcoded value of 2, but in production this value is
always incremented.
Failing over to a partition is more siimilar to failing over to another
datacenter than it is to failing over to a namespace. In a future
release we should update how localities for failover are specified. We
should be able to accept a list of localities which can include both
partition and datacenter.
* Add partition fields to targets like service route destinations
* Update validation to prevent cross-DC + cross-partition references
* Handle partitions when reading config entries for disco chain
* Encode partition in compiled targets
Fixes a bug whereby servers present in multiple network areas would be
properly segmented in the Router, but not in the gRPC mirror. This would
lead servers in the current datacenter leaving from a network area
(possibly during the network area's removal) from deleting their own
records that still exist in the standard WAN area.
The gRPC client stack uses the gRPC server tracker to execute all RPCs,
even those targeting members of the current datacenter (which is unlike
the net/rpc stack which has a bypass mechanism).
This would manifest as a gRPC method call never opening a socket because
it would block forever waiting for the current datacenter's pool of
servers to be non-empty.
Given that we do not allow wildcard partitions in intentions, no one ixn
can override the DefaultAllow setting. Only the default ACL policy
applies across all partitions.
This table purposefully does not index by partition/namespace. It's a
global view into all service names.
This table is intended to replace the current serviceListTxn watch in
intentionTopologyTxn. For cross-partition transparent proxying we need
to be able to calculate upstreams from intentions in any partition. This
means that the existing serviceListTxn function is insufficient since
it's scoped to a partition.
Moving away from that function is also beneficial because it watches the
main "services" table, so watchers will wake up when any instance is
registered or deregistered.
* state: port KV and Tombstone tables to new pattern
* go fmt'ed
* handle wildcards for tombstones
* Fix graveyard ent vs oss
* fix oss compilation error
* add partition to tombstones and kv state store indexes
* refactor to use `indexWithEnterpriseIndexable`
* Apply suggestions from code review
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
* add `singleValueID` implementation assertions
* partition `tableSessions` table
* fix sessions to use UUID and fix prefix index
* fix oss build
* clean up unused functions
* fix oss compilation
* add a partition indexer for sessions
* Fix oss to not have partition index
* fix oss tests
* remove unused operations_ent.go and operations_oss.go func
* remove unused const
* convert `IndexID` of `session_checks` table
* convert `indexSession` of `session_checks` table
* convert `indexNodeCheck` of `session_checks` table
* partition `indexID` and `indexSession` of `tableSessionChecks`
* fix oss linter
* fix review comments
* remove partition for Checks as it's always use the session partition
* fix tests
* fix tests
* do not namespace nodeChecks index
Co-authored-by: Daniel Nephin <dnephin@hashicorp.com>
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
Cross port of ent #1383 "Reject non-default datacenter when making partitioned ACLs"
On the OSS side this is a minor refactor to add some more checks that are only applicable to enterprise code.
Signed-off-by: Mark Anderson <manderson@hashicorp.com>
The test added in this commit shows the problem. Previously the
SigningKeyID was set to the RootCert not the local leaf signing cert.
This same bug was fixed in two other places back in 2019, but this last one was
missed.
While fixing this bug I noticed I had the same few lines of code in 3
places, so I extracted a new function for them.
There would be 4 places, but currently the InitializeCA flow sets this
SigningKeyID in a different way, so I've left that alone for now.
While working on the CA system it is important to be able to run all the
tests related to the system, without having to wait for unrelated tests.
There are many slow and unrelated tests in agent/consul, so we need some
way to filter to only the relevant tests.
This PR renames all the CA system related tests to start with either
`TestCAMananger` for tests of internal operations that don't have RPC
endpoint, or `TestConnectCA` for tests of RPC endpoints. This allows us
to run all the test with:
go test -run 'TestCAMananger|TestConnectCA' ./agent/consul
The test naming follows an undocumented convention of naming tests as
follows:
Test[<struct name>_]<function name>[_<test case description>]
I tried to always keep Primary/Secondary at the end of the description,
and _Vault_ has to be in the middle because of our regex to run those
tests as a separate CI job.
You may notice some of the test names changed quite a bit. I did my best
to identify the underlying method being tested, but I may have been
slightly off in some cases.
As a method on the struct type this would not be safe to call without first checking
c.isIntermediateUsedToSignLeaf.
So for now, move this logic to the CAMananger, so that it is always correct.
We were not adding the local signing cert to the CARoot. This commit
fixes that bug, and also adds support for fixing existing CARoot on
upgrade.
Also update the tests for both primary and secondary to be more strict.
Check the SigningKeyID is correct after initialization and rotation.
Validation was added on the config entry kind since that is called when
validating config entries to bootstrap via agent configuration and when
applying entries via the config RPC endpoint.
Previously we believe it was necessary for all code that required ports
to use freeport to prevent conflicts.
https://github.com/dnephin/freeport-test shows that it is actually save
to use port 0 (`127.0.0.1:0`) as long as it is passed directly to
`net.Listen`, and the listener holds the port for as long as it is
needed.
This works because freeport explicitly avoids the ephemeral port range,
and port 0 always uses that range. As you can see from the test output
of https://github.com/dnephin/freeport-test, the two systems never use
overlapping ports.
This commit converts all uses of freeport that were being passed
directly to a net.Listen to use port 0 instead. This allows us to remove
a bit of wrapping we had around httptest, in a couple places.
In d2ab767fef raftApply was changed to handle this check in
a single place, instad of having every caller check it. It looks like these few places
were missed when I did that clean up.
This commit removes the remaining resp.(error) checks, since they are all no-ops now.
This function is only ever called from operations that have already acquired the state lock, so checking
the value of state can never fail.
This change is being made in preparation for splitting out a separate type for the secondary logic. The
state can't easily be shared, so really only the expored top-level functions should acquire the 'state lock'.
This commit removes the actingSecondaryCA field, and removes the stateLock around it. This field
was acting as a proxy for providerRoot != nil, so replace it with that check instead.
The two methods which called secondarySetCAConfigured already set the state, so checking the
state again at this point will not catch runtime errors (only programming errors, which we can catch with tests).
In general, handling state transitions should be done on the "entrypoint" methods where execution starts, not
in every internal method.
This is being done to remove some unnecessary references to c.state, in preparations for extracting
types for primary/secondary.
This makes it easier to fake, which will allow me to use the ConsulProvider as
an 'external PKI' to test a customer setup where the actual root CA is not
the root we use for the Consul CA.
Replaces a call to the state store to fetch the clusterID with the
clusterID field already available on the built-in provider.
* state: port KV and Tombstone tables to new pattern
* go fmt'ed
* handle wildcards for tombstones
* Fix graveyard ent vs oss
* fix oss compilation error
* add partition to tombstones and kv state store indexes
* refactor to use `indexWithEnterpriseIndexable`
* Apply suggestions from code review
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
* partition `tableSessions` table
* fix sessions to use UUID and fix prefix index
* fix oss build
* clean up unused functions
* fix oss compilation
* add a partition indexer for sessions
* Fix oss to not have partition index
* fix oss tests
* remove unused operations_ent.go and operations_oss.go func
* convert `indexNodeCheck` of `session_checks` table
* partition `indexID` and `indexSession` of `tableSessionChecks`
* remove partition for Checks as it's always use the session partition
* partition sessions index id table
* fix rebase issues
Co-authored-by: Daniel Nephin <dnephin@hashicorp.com>
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
* state: port KV and Tombstone tables to new pattern
* go fmt'ed
* handle wildcards for tombstones
* Fix graveyard ent vs oss
* fix oss compilation error
* add partition to tombstones and kv state store indexes
* refactor to use `indexWithEnterpriseIndexable`
* Apply suggestions from code review
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
* add `singleValueID` implementation assertions
* partition `tableSessions` table
* fix sessions to use UUID and fix prefix index
* fix oss build
* clean up unused functions
* fix oss compilation
* add a partition indexer for sessions
* Fix oss to not have partition index
* fix oss tests
* remove unused operations_ent.go and operations_oss.go func
* remove unused const
* convert `IndexID` of `session_checks` table
* convert `indexSession` of `session_checks` table
* convert `indexNodeCheck` of `session_checks` table
* partition `indexID` and `indexSession` of `tableSessionChecks`
* fix oss linter
* fix review comments
* remove partition for Checks as it's always use the session partition
Co-authored-by: Daniel Nephin <dnephin@hashicorp.com>
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
* Support vault auth methods for the Vault connect CA provider
* Rotate the token (re-authenticate to vault using auth method) when the token can no longer be renewed
freddygv
Freddy
Dhia Ayachi
Daniel Nephin
R.B. Boyer
Daniel Nephin
Mathew Estafanous
Fulvio
Dan Upton
Dao Thanh Tung
Chris S. Kim
R.B. Boyer
VictorBac
Evan Culver
Kyle Havlovitz
Mike Morris
Blake Covarrubias
Jared Kirschner
Jared Kirschner
littlestar642
FFMMM
Mark Anderson
Matt Keeler
Iryna Shustava