When converting from Consul intentions to xds RBAC rules, services imported from other peers must encode additional data like partition (from the remote cluster) and trust domain.
This PR updates the PeeringTrustBundle to hold the sending side's local partition as ExportedPartition. It also updates RBAC code to encode SpiffeIDs of imported services with the ExportedPartition and TrustDomain.
Mesh gateways can use hostnames in their tagged addresses (#7999). This is useful
if you were to expose a mesh gateway using a cloud networking load balancer appliance
that gives you a DNS name but no reliable static IPs.
Envoy cannot accept hostnames via EDS and those must be configured using CDS.
There was already logic when configuring gateways in other locations in the code, but
given the illusions in play for peering the downstream of a peered service wasn't aware
that it should be doing that.
Also:
- ensuring that we always try to use wan-like addresses to cross peer boundaries.
Mesh gateways will now enable tcp connections with SNI names including peering information so that those connections may be proxied.
Note: this does not change the callers to use these mesh gateways.
This is the OSS portion of enterprise PR 1994
Rather than directly interrogating the agent-local state for HTTP
checks using the `HTTPCheckFetcher` interface, we now rely on the
config snapshot containing the checks.
This reduces the number of changes required to support server xDS
sessions.
It's not clear why the fetching approach was introduced in
931d167ebb.
Envoy's SPIFFE certificate validation extension allows for us to
validate against different root certificates depending on the trust
domain of the dialing proxy.
If there are any trust bundles from peers in the config snapshot then we
use the SPIFFE validator as the validation context, rather than the
usual TrustedCA.
The injected validation config includes the local root certificates as
well.
For mTLS to work between two proxies in peered clusters with different root CAs,
proxies need to configure their outbound listener to use different root certificates
for validation.
Up until peering was introduced proxies would only ever use one set of root certificates
to validate all mesh traffic, both inbound and outbound. Now an upstream proxy
may have a leaf certificate signed by a CA that's different from the dialing proxy's.
This PR makes changes to proxycfg and xds so that the upstream TLS validation
uses different root certificates depending on which cluster is being dialed.
OSS port of enterprise PR 1822
Includes the necessary changes to the `proxycfg` and `xds` packages to enable
Consul servers to configure arbitrary proxies using catalog data.
Broadly, `proxycfg.Manager` now has public methods for registering,
deregistering, and listing registered proxies — the existing local agent
state-sync behavior has been moved into a separate component that makes use of
these methods.
When an xDS session is started for a proxy service in the catalog, a goroutine
will be spawned to watch the service in the server's state store and
re-register it with the `proxycfg.Manager` whenever it is updated (and clean
it up when the client goes away).
OSS portion of enterprise PR 1857.
This removes (most) references to the `cache.UpdateEvent` type in the
`proxycfg` package.
As we're going to be direct usage of the agent cache with interfaces that
can be satisfied by alternative server-local datasources, it doesn't make
sense to depend on this type everywhere anymore (particularly on the
`state.ch` channel).
We also plan to extract `proxycfg` out of Consul into a shared library in
the future, which would require removing this dependency.
Aside from a fairly rote find-and-replace, the main change is that the
`cache.Cache` and `health.Client` types now accept a callback function
parameter, rather than a `chan<- cache.UpdateEvents`. This allows us to
do the type conversion without running another goroutine.
Description
Add x-fowarded-client-cert information on trusted incoming connections.
Envoy provides support forwarding and annotating the
x-forwarded-client-cert header via the forward_client_cert_details
set_current_client_cert_details filter fields. It would be helpful for
consul to support this directly in its config. The escape hatches are
a bit cumbersome for this purpose.
This has been implemented on incoming connections to envoy. Outgoing
(from the local service through the sidecar) will not have a
certificate, and so are left alone.
A service on an incoming connection will now get headers something like this:
```
X-Forwarded-Client-Cert:[By=spiffe://efad7282-d9b2-3298-f6d8-38b37fb58df3.consul/ns/default/dc/dc1/svc/counting;Hash=61ad5cbdfcb50f5a3ec0ca60923d61613c149a9d4495010a64175c05a0268ab2;Cert="-----BEGIN%20CERTIFICATE-----%0AMIICHDCCAcOgAwIBAgIBCDAKBggqhkjOPQQDAjAxMS8wLQYDVQQDEyZwcmktMTli%0AYXdyb2YuY29uc3VsLmNhLmVmYWQ3MjgyLmNvbnN1bDAeFw0yMjA0MjkwMzE0NTBa%0AFw0yMjA1MDIwMzE0NTBaMAAwWTATBgcqhkjOPQIBBggqhkjOPQMBBwNCAARVIZ7Y%0AZEXfbOGBfxGa7Vuok1MIng%2FuzLQK2xLVlSTIPDbO5hstTGP%2B%2FGx182PYFP3jYqk5%0Aq6rYWe1wiPNMA30Io4H8MIH5MA4GA1UdDwEB%2FwQEAwIDuDAdBgNVHSUEFjAUBggr%0ABgEFBQcDAgYIKwYBBQUHAwEwDAYDVR0TAQH%2FBAIwADApBgNVHQ4EIgQgrp4q50oX%0AHHghMbxz5Bk8OJFWMdfgH0Upr350WlhyxvkwKwYDVR0jBCQwIoAgUe6uERAIj%2FLM%0AyuFzDc3Wbp9TGAKBJYAwyhF14ToOQCMwYgYDVR0RAQH%2FBFgwVoZUc3BpZmZlOi8v%0AZWZhZDcyODItZDliMi0zMjk4LWY2ZDgtMzhiMzdmYjU4ZGYzLmNvbnN1bC9ucy9k%0AZWZhdWx0L2RjL2RjMS9zdmMvZGFzaGJvYXJkMAoGCCqGSM49BAMCA0cAMEQCIDwb%0AFlchufggNTijnQ5SUcvTZrWlZyq%2FrdVC20nbbmWLAiAVshNNv1xBqJI1NmY2HI9n%0AgRMfb8aEPVSuxEHhqy57eQ%3D%3D%0A-----END%20CERTIFICATE-----%0A";Chain="-----BEGIN%20CERTIFICATE-----%0AMIICHDCCAcOgAwIBAgIBCDAKBggqhkjOPQQDAjAxMS8wLQYDVQQDEyZwcmktMTli%0AYXdyb2YuY29uc3VsLmNhLmVmYWQ3MjgyLmNvbnN1bDAeFw0yMjA0MjkwMzE0NTBa%0AFw0yMjA1MDIwMzE0NTBaMAAwWTATBgcqhkjOPQIBBggqhkjOPQMBBwNCAARVIZ7Y%0AZEXfbOGBfxGa7Vuok1MIng%2FuzLQK2xLVlSTIPDbO5hstTGP%2B%2FGx182PYFP3jYqk5%0Aq6rYWe1wiPNMA30Io4H8MIH5MA4GA1UdDwEB%2FwQEAwIDuDAdBgNVHSUEFjAUBggr%0ABgEFBQcDAgYIKwYBBQUHAwEwDAYDVR0TAQH%2FBAIwADApBgNVHQ4EIgQgrp4q50oX%0AHHghMbxz5Bk8OJFWMdfgH0Upr350WlhyxvkwKwYDVR0jBCQwIoAgUe6uERAIj%2FLM%0AyuFzDc3Wbp9TGAKBJYAwyhF14ToOQCMwYgYDVR0RAQH%2FBFgwVoZUc3BpZmZlOi8v%0AZWZhZDcyODItZDliMi0zMjk4LWY2ZDgtMzhiMzdmYjU4ZGYzLmNvbnN1bC9ucy9k%0AZWZhdWx0L2RjL2RjMS9zdmMvZGFzaGJvYXJkMAoGCCqGSM49BAMCA0cAMEQCIDwb%0AFlchufggNTijnQ5SUcvTZrWlZyq%2FrdVC20nbbmWLAiAVshNNv1xBqJI1NmY2HI9n%0AgRMfb8aEPVSuxEHhqy57eQ%3D%3D%0A-----END%20CERTIFICATE-----%0A";Subject="";URI=spiffe://efad7282-d9b2-3298-f6d8-38b37fb58df3.consul/ns/default/dc/dc1/svc/dashboard]
```
Closes#12852
Just like standard upstreams the order of applicability in descending precedence:
1. caller's `service-defaults` upstream override for destination
2. caller's `service-defaults` upstream defaults
3. destination's `service-resolver` ConnectTimeout
4. system default of 5s
Co-authored-by: mrspanishviking <kcardenas@hashicorp.com>
Adds a new gRPC streaming endpoint (WatchRoots) that dataplane clients will
use to fetch the current list of active Connect CA roots and receive new
lists whenever the roots are rotated.
- `tls.incoming`: applies to the inbound mTLS targeting the public
listener on `connect-proxy` and `terminating-gateway` envoy instances
- `tls.outgoing`: applies to the outbound mTLS dialing upstreams from
`connect-proxy` and `ingress-gateway` envoy instances
Fixes#11966
Introduces the capability to configure TLS differently for Consul's
listeners/ports (i.e. HTTPS, gRPC, and the internal multiplexed RPC
port) which is useful in scenarios where you may want the HTTPS or
gRPC interfaces to present a certificate signed by a well-known/public
CA, rather than the certificate used for internal communication which
must have a SAN in the form `server.<dc>.consul`.
* First pass for helper for bulk changes
Signed-off-by: Mark Anderson <manderson@hashicorp.com>
* Convert ACLRead and ACLWrite to new form
Signed-off-by: Mark Anderson <manderson@hashicorp.com>
* AgentRead and AgentWRite
Signed-off-by: Mark Anderson <manderson@hashicorp.com>
* Fix EventWrite
Signed-off-by: Mark Anderson <manderson@hashicorp.com>
* KeyRead, KeyWrite, KeyList
Signed-off-by: Mark Anderson <manderson@hashicorp.com>
* KeyRing
Signed-off-by: Mark Anderson <manderson@hashicorp.com>
* NodeRead NodeWrite
Signed-off-by: Mark Anderson <manderson@hashicorp.com>
* OperatorRead and OperatorWrite
Signed-off-by: Mark Anderson <manderson@hashicorp.com>
* PreparedQuery
Signed-off-by: Mark Anderson <manderson@hashicorp.com>
* Intention partial
Signed-off-by: Mark Anderson <manderson@hashicorp.com>
* Fix ServiceRead, Write ,etc
Signed-off-by: Mark Anderson <manderson@hashicorp.com>
* Error check ServiceRead?
Signed-off-by: Mark Anderson <manderson@hashicorp.com>
* Fix Sessionread/Write
Signed-off-by: Mark Anderson <manderson@hashicorp.com>
* Fixup snapshot ACL
Signed-off-by: Mark Anderson <manderson@hashicorp.com>
* Error fixups for txn
Signed-off-by: Mark Anderson <manderson@hashicorp.com>
* Add changelog
Signed-off-by: Mark Anderson <manderson@hashicorp.com>
* Fixup review comments
Signed-off-by: Mark Anderson <manderson@hashicorp.com>
Prior to this PR for the envoy xDS golden tests in the agent/xds package we
were hand-creating a proxycfg.ConfigSnapshot structure in the proper format for
input to the xDS generator. Over time this intermediate structure has gotten
trickier to build correctly for the various tests.
This PR proposes to switch to using the existing mechanism for turning a
structs.NodeService and a sequence of cache.UpdateEvent copies into a
proxycfg.ConfigSnapshot, as that is less error prone to construct and aligns
more with how the data arrives.
NOTE: almost all of this is in test-related code. I tried super hard to craft
correct event inputs to get the golden files to be the same, or similar enough
after construction to feel ok that i recreated the spirit of the original test
cases.
Due to timing, a transparent proxy could have two upstreams to dial
directly with the same address.
For example:
- The orders service can dial upstreams shipping and payment directly.
- An instance of shipping at address 10.0.0.1 is deregistered.
- Payments is scaled up and scheduled to have address 10.0.0.1.
- The orders service receives the event for the new payments instance
before seeing the deregistration for the shipping instance. At this
point two upstreams have the same passthrough address and Envoy will
reject the listener configuration.
To disambiguate this commit considers the Raft index when storing
passthrough addresses. In the example above, 10.0.0.1 would only be
associated with the newer payments service instance.
Transparent proxies can set up filter chains that allow direct
connections to upstream service instances. Services that can be dialed
directly are stored in the PassthroughUpstreams map of the proxycfg
snapshot.
Previously these addresses were not being cleaned up based on new
service health data. The list of addresses associated with an upstream
service would only ever grow.
As services scale up and down, eventually they will have instances
assigned to an IP that was previously assigned to a different service.
When IP addresses are duplicated across filter chain match rules the
listener config will be rejected by Envoy.
This commit updates the proxycfg snapshot management so that passthrough
addresses can get cleaned up when no longer associated with a given
upstream.
There is still the possibility of a race condition here where due to
timing an address is shared between multiple passthrough upstreams.
That concern is mitigated by #12195, but will be further addressed
in a follow-up.
Fixes#11876
This enforces that multiple xDS mutations are not issued on the same ADS connection at once, so that we can 100% control the order that they are applied. The original code made assumptions about the way multiple in-flight mutations were applied on the Envoy side that was incorrect.
When a wildcard xDS type (LDS/CDS/SRDS) reconnects from a delta xDS stream,
prior to envoy `1.19.0` it would populate the `ResourceNamesSubscribe` field
with the full list of currently subscribed items, instead of simply omitting it
to infer that it wanted everything (which is what wildcard mode means).
This upstream issue was filed in envoyproxy/envoy#16063 and fixed in
envoyproxy/envoy#16153 which went out in Envoy `1.19.0` and is fixed in later
versions (later refactored in envoyproxy/envoy#16855).
This PR conditionally forces LDS/CDS to be wildcard-only even when the
connected Envoy requests a non-wildcard subscription, but only does so on
versions prior to `1.19.0`, as we should not need to do this on later versions.
This fixes the failure case as described here: #11833 (comment)
Co-authored-by: Huan Wang <fredwanghuan@gmail.com>
The gist here is that now we use a value-type struct proxycfg.UpstreamID
as the map key in ConfigSnapshot maps where we used to use "upstream
id-ish" strings. These are internal only and used just for bidirectional
trips through the agent cache keyspace (like the discovery chain target
struct).
For the few places where the upstream id needs to be projected into xDS,
that's what (proxycfg.UpstreamID).EnvoyID() is for. This lets us ALWAYS
inject the partition and namespace into these things without making
stuff like the golden testdata diverge.
* xds: refactor ingress listener SDS configuration
* xds: update resolveListenerSDS call args in listeners_test
* ingress: add TLS min, max and cipher suites to GatewayTLSConfig
* xds: implement envoyTLSVersions and envoyTLSCipherSuites
* xds: merge TLS config
* xds: configure TLS parameters with ingress TLS context from leaf
* xds: nil check in resolveListenerTLSConfig validation
* xds: nil check in makeTLSParameters* functions
* changelog: add entry for TLS params on ingress config entries
* xds: remove indirection for TLS params in TLSConfig structs
* xds: return tlsContext, nil instead of ambiguous err
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
* xds: switch zero checks to types.TLSVersionUnspecified
* ingress: add validation for ingress config entry TLS params
* ingress: validate listener TLS config
* xds: add basic ingress with TLS params tests
* xds: add ingress listeners mixed TLS min version defaults precedence test
* xds: add more explicit tests for ingress listeners inheriting gateway defaults
* xds: add test for single TLS listener on gateway without TLS defaults
* xds: regen golden files for TLSVersionInvalid zero value, add TLSVersionAuto listener test
* types/tls: change TLSVersion to string
* types/tls: update TLSCipherSuite to string type
* types/tls: implement validation functions for TLSVersion and TLSCipherSuites, make some maps private
* api: add TLS params to GatewayTLSConfig, add tests
* api: add TLSMinVersion to ingress gateway config entry test JSON
* xds: switch to Envoy TLS cipher suite encoding from types package
* xds: fixup validation for TLSv1_3 min version with cipher suites
* add some kitchen sink tests and add a missing struct tag
* xds: check if mergedCfg.TLSVersion is in TLSVersionsWithConfigurableCipherSuites
* xds: update connectTLSEnabled comment
* xds: remove unsued resolveGatewayServiceTLSConfig function
* xds: add makeCommonTLSContextFromLeafWithoutParams
* types/tls: add LessThan comparator function for concrete values
* types/tls: change tlsVersions validation map from string to TLSVersion keys
* types/tls: remove unused envoyTLSCipherSuites
* types/tls: enable chacha20 cipher suites for Consul agent
* types/tls: remove insecure cipher suites from allowed config
TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256 and TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256 are both explicitly listed as insecure and disabled in the Go source.
Refs https://cs.opensource.google/go/go/+/refs/tags/go1.17.3:src/crypto/tls/cipher_suites.go;l=329-330
* types/tls: add ValidateConsulAgentCipherSuites function, make direct lookup map private
* types/tls: return all unmatched cipher suites in validation errors
* xds: check that Envoy API value matching TLS version is found when building TlsParameters
* types/tls: check that value is found in map before appending to slice in MarshalEnvoyTLSCipherSuiteStrings
* types/tls: cast to string rather than fmt.Printf in TLSCihperSuite.String()
* xds: add TLSVersionUnspecified to list of configurable cipher suites
* structs: update note about config entry warning
* xds: remove TLS min version cipher suite unconfigurable test placeholder
* types/tls: update tests to remove assumption about private map values
Co-authored-by: R.B. Boyer <rb@hashicorp.com>
Previously we could get into a state where discovery chain entries were
not cleaned up after the associated watch was cancelled. These changes
add handling for that case where stray chain references are encountered.
The duo of `makeUpstreamFilterChainForDiscoveryChain` and `makeListenerForDiscoveryChain` were really hard to reason about, and led to concealing a bug in their branching logic. There were several issues here:
- They tried to accomplish too much: determining filter name, cluster name, and whether RDS should be used.
- They embedded logic to handle significantly different kinds of upstream listeners (passthrough, prepared query, typical services, and catch-all)
- They needed to coalesce different data sources (Upstream and CompiledDiscoveryChain)
Rather than handling all of those tasks inside of these functions, this PR pulls out the RDS/clusterName/filterName logic.
This refactor also fixed a bug with the handling of [UpstreamDefaults](https://www.consul.io/docs/connect/config-entries/service-defaults#defaults). These defaults get stored as UpstreamConfig in the proxy snapshot with a DestinationName of "*", since they apply to all upstreams. However, this wildcard destination name must not be used when creating the name of the associated upstream cluster. The coalescing logic in the original functions here was in some situations creating clusters with a `*.` prefix, which is not a valid destination.
Fixes an issue described in #10132, where if two DCs are WAN federated
over mesh gateways, and the gateway in the non-primary DC is terminated
and receives a new IP address (as is commonly the case when running them
on ephemeral compute instances) the primary DC is unable to re-establish
its connection until the agent running on its own gateway is restarted.
This was happening because we always preferred gateways discovered by
the `Internal.ServiceDump` RPC (which would fail because there's no way
to dial the remote DC) over those discovered in the federation state,
which is replicated as long as the primary DC's gateway is reachable.
The DebugConfig in the self endpoint can change at any time. It's not a stable API.
This commit adds the XDSPort to a stable part of the XDS api, and changes the envoy command to read
this new field.
It includes support for the old API as well, in case a newer CLI is used with an older API, and
adds a test for both cases.
Evan Culver
Chris S. Kim
R.B. Boyer
Dan Upton
Freddy
freddygv
DanStough
Kyle Havlovitz
Eric
Mark Anderson
Eric Haberkorn
R.B. Boyer
Evan Culver
Mike Morris
Daniel Nephin
Giulio Micheloni
Paul Banks