Prior to the introduction of this configuration, grpc keepalive messages were
sent after 2 hours of inactivity on the stream. This posed issues in various
scenarios where the server-side xds connection balancing was unaware that envoy
instances were uncleanly killed / force-closed, since the connections would
only be cleaned up after ~5 minutes of TCP timeouts occurred. Setting this
config to a 30 second interval with a 20 second timeout ensures that at most,
it should take up to 50 seconds for a dead xds connection to be closed.
* agent: configure server lastseen timestamp
Signed-off-by: Dan Bond <danbond@protonmail.com>
* use correct config
Signed-off-by: Dan Bond <danbond@protonmail.com>
* add comments
Signed-off-by: Dan Bond <danbond@protonmail.com>
* use default age in test golden data
Signed-off-by: Dan Bond <danbond@protonmail.com>
* add changelog
Signed-off-by: Dan Bond <danbond@protonmail.com>
* fix runtime test
Signed-off-by: Dan Bond <danbond@protonmail.com>
* agent: add server_metadata
Signed-off-by: Dan Bond <danbond@protonmail.com>
* update comments
Signed-off-by: Dan Bond <danbond@protonmail.com>
* correctly check if metadata file does not exist
Signed-off-by: Dan Bond <danbond@protonmail.com>
* follow instructions for adding new config
Signed-off-by: Dan Bond <danbond@protonmail.com>
* add comments
Signed-off-by: Dan Bond <danbond@protonmail.com>
* update comments
Signed-off-by: Dan Bond <danbond@protonmail.com>
* Update agent/agent.go
Co-authored-by: Dan Upton <daniel@floppy.co>
* agent/config: add validation for duration with min
Signed-off-by: Dan Bond <danbond@protonmail.com>
* docs: add new server_rejoin_age_max config definition
Signed-off-by: Dan Bond <danbond@protonmail.com>
* agent: add unit test for checking server last seen
Signed-off-by: Dan Bond <danbond@protonmail.com>
* agent: log continually for 60s before erroring
Signed-off-by: Dan Bond <danbond@protonmail.com>
* pr comments
Signed-off-by: Dan Bond <danbond@protonmail.com>
* remove unneeded todo
* agent: fix error message
Signed-off-by: Dan Bond <danbond@protonmail.com>
---------
Signed-off-by: Dan Bond <danbond@protonmail.com>
Co-authored-by: Dan Upton <daniel@floppy.co>
* server: add placeholder glue for rate limit handler
This commit adds a no-op implementation of the rate-limit handler and
adds it to the `consul.Server` struct and setup code.
This allows us to start working on the net/rpc and gRPC interceptors and
config logic.
* Add handler errors
* Set the global read and write limits
* fixing multilimiter moving packages
* Fix typo
* Simplify globalLimit usage
* add multilimiter and tests
* exporting LimitedEntity
* Apply suggestions from code review
Co-authored-by: John Murret <john.murret@hashicorp.com>
* add config update and rename config params
* add doc string and split config
* Apply suggestions from code review
Co-authored-by: Dan Upton <daniel@floppy.co>
* use timer to avoid go routine leak and change the interface
* add comments to tests
* fix failing test
* add prefix with config edge, refactor tests
* Apply suggestions from code review
Co-authored-by: Dan Upton <daniel@floppy.co>
* refactor to apply configs for limiters under a prefix
* add fuzz tests and fix bugs found. Refactor reconcile loop to have a simpler logic
* make KeyType an exported type
* split the config and limiter trees to fix race conditions in config update
* rename variables
* fix race in test and remove dead code
* fix reconcile loop to not create a timer on each loop
* add extra benchmark tests and fix tests
* fix benchmark test to pass value to func
* server: add placeholder glue for rate limit handler
This commit adds a no-op implementation of the rate-limit handler and
adds it to the `consul.Server` struct and setup code.
This allows us to start working on the net/rpc and gRPC interceptors and
config logic.
* Set the global read and write limits
* fixing multilimiter moving packages
* add server configuration for global rate limiting.
* remove agent test
* remove added stuff from handler
* remove added stuff from multilimiter
* removing unnecessary TODOs
* Removing TODO comment from handler
* adding in defaulting to infinite
* add disabled status in there
* adding in documentation for disabled mode.
* make disabled the default.
* Add mock and agent test
* addig documentation and missing mock file.
* Fixing test TestLoad_IntegrationWithFlags
* updating docs based on PR feedback.
* Updating Request Limits mode to use int based on PR feedback.
* Adding RequestLimits struct so we have a nested struct in ReloadableConfig.
* fixing linting references
* Update agent/consul/rate/handler.go
Co-authored-by: Dan Upton <daniel@floppy.co>
* Update agent/consul/config.go
Co-authored-by: Dan Upton <daniel@floppy.co>
* removing the ignore of the request limits in JSON. addingbuilder logic to convert any read rate or write rate less than 0 to rate.Inf
* added conversion function to convert request limits object to handler config.
* Updating docs to reflect gRPC and RPC are rate limit and as a result, HTTP requests are as well.
* Updating values for TestLoad_FullConfig() so that they were different and discernable.
* Updating TestRuntimeConfig_Sanitize
* Fixing TestLoad_IntegrationWithFlags test
* putting nil check in place
* fixing rebase
* removing change for missing error checks. will put in another PR
* Rebasing after default multilimiter config change
* resolving rebase issues
* updating reference for incomingRPCLimiter to use interface
* updating interface
* Updating interfaces
* Fixing mock reference
Co-authored-by: Daniel Upton <daniel@floppy.co>
Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
Fix an issue where rpc_hold_timeout was being used as the timeout for non-blocking queries. Users should be able to tune read timeouts without fiddling with rpc_hold_timeout. A new configuration `rpc_read_timeout` is created.
Refactor some implementation from the original PR 11500 to remove the misleading linkage between RPCInfo's timeout (used to retry in case of certain modes of failures) and the client RPC timeouts.
Adds a user-configurable rate limiter to proxycfg snapshot delivery,
with a default limit of 250 updates per second.
This addresses a problem observed in our load testing of Consul
Dataplane where updating a "global" resource such as a wildcard
intention or the proxy-defaults config entry could starve the Raft or
Memberlist goroutines of CPU time, causing general cluster instability.
To ease the transition for users, the original gRPC
port can still operate in a deprecated mode as either
plain-text or TLS mode. This behavior should be removed
in a future release whenever we no longer support this.
The resulting behavior from this commit is:
`ports.grpc > 0 && ports.grpc_tls > 0` spawns both plain-text and tls ports.
`ports.grpc > 0 && grpc.tls == undefined` spawns a single plain-text port.
`ports.grpc > 0 && grpc.tls != undefined` spawns a single tls port (backwards compat mode).
- Introduce a new telemetry configurable parameter retry_failed_connection. User can set the value to true to let consul agent continue its start process on failed connection to datadog server. When set to false, agent will stop on failed start. The default behavior is true.
Co-authored-by: Dan Upton <daniel@floppy.co>
Co-authored-by: Evan Culver <eculver@users.noreply.github.com>
* tlsutil: initial implementation of types/TLSVersion
tlsutil: add test for parsing deprecated agent TLS version strings
tlsutil: return TLSVersionInvalid with error
tlsutil: start moving tlsutil cipher suite lookups over to types/tls
tlsutil: rename tlsLookup to ParseTLSVersion, add cipherSuiteLookup
agent: attempt to use types in runtime config
agent: implement b.tlsVersion validation in config builder
agent: fix tlsVersion nil check in builder
tlsutil: update to renamed ParseTLSVersion and goTLSVersions
tlsutil: fixup TestConfigurator_CommonTLSConfigTLSMinVersion
tlsutil: disable invalid config parsing tests
tlsutil: update tests
auto_config: lookup old config strings from base.TLSMinVersion
auto_config: update endpoint tests to use TLS types
agent: update runtime_test to use TLS types
agent: update TestRuntimeCinfig_Sanitize.golden
agent: update config runtime tests to expect TLS types
* website: update Consul agent tls_min_version values
* agent: fixup TLS parsing and compilation errors
* test: fixup lint issues in agent/config_runtime_test and tlsutil/config_test
* tlsutil: add CHACHA20_POLY1305 cipher suites to goTLSCipherSuites
* test: revert autoconfig tls min version fixtures to old format
* types: add TLSVersions public function
* agent: add warning for deprecated TLS version strings
* agent: move agent config specific logic from tlsutil.ParseTLSVersion into agent config builder
* tlsutil(BREAKING): change default TLS min version to TLS 1.2
* agent: move ParseCiphers logic from tlsutil into agent config builder
* tlsutil: remove unused CipherString function
* agent: fixup import for types package
* Revert "tlsutil: remove unused CipherString function"
This reverts commit 6ca7f6f58d268e617501b7db9500113c13bae70c.
* agent: fixup config builder and runtime tests
* tlsutil: fixup one remaining ListenerConfig -> ProtocolConfig
* test: move TLS cipher suites parsing test from tlsutil into agent config builder tests
* agent: remove parseCiphers helper from auto_config_endpoint_test
* test: remove unused imports from tlsutil
* agent: remove resolved FIXME comment
* tlsutil: remove TODO and FIXME in cipher suite validation
* agent: prevent setting inherited cipher suite config when TLS 1.3 is specified
* changelog: add entry for converting agent config to TLS types
* agent: remove FIXME in runtime test, this is covered in builder tests with invalid tls9 value now
* tlsutil: remove config tests for values checked at agent config builder boundary
* tlsutil: remove tls version check from loadProtocolConfig
* tlsutil: remove tests and TODOs for logic checked in TestBuilder_tlsVersion and TestBuilder_tlsCipherSuites
* website: update search link for supported Consul agent cipher suites
* website: apply review suggestions for tls_min_version description
* website: attempt to clean up markdown list formatting for tls_min_version
* website: moar linebreaks to fix tls_min_version formatting
* Revert "website: moar linebreaks to fix tls_min_version formatting"
This reverts commit 38585927422f73ebf838a7663e566ac245f2a75c.
* autoconfig: translate old values for TLSMinVersion
* agent: rename var for translated value of deprecated TLS version value
* Update agent/config/deprecated.go
Co-authored-by: Dan Upton <daniel@floppy.co>
* agent: fix lint issue
* agent: fixup deprecated config test assertions for updated warning
Co-authored-by: Dan Upton <daniel@floppy.co>
Introduces the capability to configure TLS differently for Consul's
listeners/ports (i.e. HTTPS, gRPC, and the internal multiplexed RPC
port) which is useful in scenarios where you may want the HTTPS or
gRPC interfaces to present a certificate signed by a well-known/public
CA, rather than the certificate used for internal communication which
must have a SAN in the form `server.<dc>.consul`.
* add root_cert_ttl option for consul connect, vault ca providers
Signed-off-by: FFMMM <FFMMM@users.noreply.github.com>
* Apply suggestions from code review
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
* add changelog, pr feedback
Signed-off-by: FFMMM <FFMMM@users.noreply.github.com>
* Update .changelog/11428.txt, more docs
Co-authored-by: Daniel Nephin <dnephin@hashicorp.com>
* Update website/content/docs/agent/options.mdx
Co-authored-by: Kyle Havlovitz <kylehav@gmail.com>
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
Co-authored-by: Daniel Nephin <dnephin@hashicorp.com>
Co-authored-by: Kyle Havlovitz <kylehav@gmail.com>
Signed-off-by: Jakub Sokołowski <jakub@status.im>
* agent: add failures_before_warning setting
The new setting allows users to specify the number of check failures
that have to happen before a service status us updated to be `warning`.
This allows for more visibility for detected issues without creating
alerts and pinging administrators. Unlike the previous behavior, which
caused the service status to not update until it reached the configured
`failures_before_critical` setting, now Consul updates the Web UI view
with the `warning` state and the output of the service check when
`failures_before_warning` is breached.
The default value of `FailuresBeforeWarning` is the same as the value of
`FailuresBeforeCritical`, which allows for retaining the previous default
behavior of not triggering a warning.
When `FailuresBeforeWarning` is set to a value higher than that of
`FailuresBeforeCritical it has no effect as `FailuresBeforeCritical`
takes precedence.
Resolves: https://github.com/hashicorp/consul/issues/10680
Signed-off-by: Jakub Sokołowski <jakub@status.im>
Co-authored-by: Jakub Sokołowski <jakub@status.im>
The hcl decoding apparently uses strconv.ParseInt, which fails to parse a 64bit int.
Since hcl v1 is basically EOl, it seems unlikely we'll fix this in hcl.
Since this test is only about loading values from config files, the extra large number
doesn't seem important. Trim a few zeros from the numbers so that they parse
properly on 32bit platforms.
Also skip a slow test when -short is used.
This PR replaces the original boolean used to configure transparent
proxy mode. It was replaced with a string mode that can be set to:
- "": Empty string is the default for when the setting should be
defaulted from other configuration like config entries.
- "direct": Direct mode is how applications originally opted into the
mesh. Proxy listeners need to be dialed directly.
- "transparent": Transparent mode enables configuring Envoy as a
transparent proxy. Traffic must be captured and redirected to the
inbound and outbound listeners.
This PR also adds a struct for transparent proxy specific configuration.
Initially this is not stored as a pointer. Will revisit that decision
before GA.
* add http2 ping checks
* fix test issue
* add h2ping check to config resources
* add new test and docs for h2ping
* fix grammatical inconsistency in H2PING documentation
* resolve rebase conflicts, add test for h2ping tls verification failure
* api documentation for h2ping
* update test config data with H2PING
* add H2PING to protocol buffers and update changelog
* fix typo in changelog entry
Some TLS servers require SNI, but the Golang HTTP client doesn't
include it in the ClientHello when connecting to an IP address. This
change adds a new TLSServerName field to health check definitions to
optionally set it. This fixes#9473.
This commit makes a number of changes that should make
TestLoad_FullConfig easier to work with, and make the test more like
real world scenarios.
* use separate files in testdata/ dir to store the config source.
Separate files are much easier to edit because editors can syntax
highlight json/hcl, and it makes strings easier to find. Previously
trying to find strings would match strings used in other tests.
* use the exported config.Load interface instead of internal NewBuilder
and BuildAndValidate.
* remove the tail config overrides, which are only necessary with
nonZero works.
Derek Menteer
Matt Keeler
Nick Ethier
Dan Bond
Poonam Jadhav
Paul Banks
John Murret
Eric Haberkorn
Chris S. Kim
Dan Upton
Hans Hasselberg
Derek Menteer
Alessandro De Blasis
Pablo Ruiz García
Luke Kysow
alex
cskh
Kyle Havlovitz
Mike Morris
Eric
FFMMM
Daniel Nephin
tarat44
Dhia Ayachi
R.B. Boyer
Freddy
Matt Keeler
Mark Anderson
freddygv
Christopher Broglie