* [NET-6356] Add tenancy to Failover Tests
* [NET-6438] Add tenancy to xDS Tests
- Added cleanup post test run
* [NET-6356] Add tenancy to failover Tests
- using t.Cleanup instead of defer delete
As the V2 architecture hinges on eventual consistency and controllers reconciling the existing state in response to writes, there are potential issues we could run into regarding ordering and timing of operations. We want to be able to guarantee that given a set of resources the system will always eventually get to the desired correct state. The order of resource writes and delays in performing those writes should not alter the final outcome of reaching the desired state.
To that end, this commit introduces arbitrary randomized delays before performing resources writes into the `resourcetest.Client`. Its `PublishResources` method was already randomizing the order of resource writes. By default, no delay is added to normal writes and deletes but tests can opt-in via either passing hard coded options when creating the `resourcetest.Client` or using the `resourcetest.ConfigureTestCLIFlags` function to allow processing of CLI parameters.
In addition to allowing configurability of the request delay min and max, the client also has a configurable random number generator seed. When Using the CLI parameter helpers, a test log will be written noting the currently used settings. If the test fails then you can reproduce the same delays and order randomizations by providing the seed during the previous test failure.
Add some generic type hook wrappers to first decode the data
There seems to be a pattern for Validation, Mutation and Write Authorization hooks where they first need to decode the Any data before doing the domain specific work.
This PR introduces 3 new functions to generate wrappers around the other hooks to pre-decode the data into a DecodedResource and pass that in instead of the original pbresource.Resource.
This PR also updates the various catalog data types to use the new hook generators.
* xds: Ensure v2 route match is populated for gRPC
Similar to HTTP, ensure that route match config (which is required by
Envoy) is populated when default values are used.
Because the default matches generated for gRPC contain a single empty
`GRPCRouteMatch`, and that proto does not directly support prefix-based
config, an interpretation of the empty struct is needed to generate the
same output that the `HTTPRouteMatch` is explicitly configured to
provide in internal/mesh/internal/controllers/routes/generate.go.
* xds: Ensure protocol set for gRPC resources
Add explicit protocol in `ProxyStateTemplate` builders and validate it
is always set on clusters. This ensures that HTTP filters and
`http2_protocol_options` are populated in all the necessary places for
gRPC traffic and prevents future unintended omissions of non-TCP
protocols.
Co-authored-by: John Murret <john.murret@hashicorp.com>
---------
Co-authored-by: John Murret <john.murret@hashicorp.com>
To properly enforce writes on resources that have workload selectors with prefixes, we need another service authorization rule that allows us to check whether read is allowed within a given prefix. Specifically we need to only allow writes if the policy prefix allows for a wider set of names than the prefix selector on the resource. We should also not allow policies with exact names for prefix matches.
Part of [NET-3993]
This change adds ACL hooks to the remaining catalog and mesh resources, excluding any computed ones. Those will for now continue using the default operator:x permissions.
It refactors a lot of the common testing functions so that they can be re-used between resources.
There are also some types that we don't yet support (e.g. virtual IPs) that this change adds ACL hooks to for future-proofing.
This implements the Filter field on pbcatalog.WorkloadSelector to be
a post-fetch in-memory filter using the https://github.com/hashicorp/go-bexpr
expression language to filter resources based on their envelope metadata fields.
All existing usages of WorkloadSelector should be able to make use of the filter.
This change builds on #19043 and #19067 and updates the sidecar controller to use those computed resources. This achieves several benefits:
* The cache is now simplified which helps us solve for previous bugs (such as multiple Upstreams/Destinations targeting the same service would overwrite each other)
* We no longer need proxy config cache
* We no longer need to do merging of proxy configs as part of the controller logic
* Controller watches are simplified because we no longer need to have complex mapping using cache and can instead use the simple ReplaceType mapper.
It also makes several other improvements/refactors:
* Unifies all caches into one. This is because originally the caches were more independent, however, now that they need to interact with each other it made sense to unify them where sidecar proxy controller uses one cache with 3 bimappers
* Unifies cache and mappers. Mapper already needed all caches anyway and so it made sense to make the cache do the mapping also now that the cache is unified.
* Gets rid of service endpoints watches. This was needed to get updates in a case when service's identities have changed and we need to update proxy state template's spiffe IDs for those destinations. This will however generate a lot of reconcile requests for this controller as service endpoints objects can change a lot because they contain workload's health status. This is solved by adding a status to the service object tracking "bound identities" and have service endpoints controller update it. Having service's status updated allows us to get updates in the sidecar proxy controller because it's already watching service objects
* Add a watch for workloads. We need it so that we get updates if workload's ports change. This also ensures that we update cached identities in case workload's identity changes.
* Introduce a new type `ComputedProxyConfiguration` and add a controller for it. This is needed for two reasons. The first one is that external integrations like kubernetes may need to read the fully computed and sorted proxy configuration per workload. The second reasons is that it makes sidecar-proxy controller logic quite a bit simpler as it no longer needs to do this.
* Generalize workload selection mapper and fix a bug where it would delete IDs from the tree if only one is left after a removal is done.
FailoverPolicy resources are name-aligned with the Service they control.
They also contain a list of possible failover destinations that are References
to other Services.
The ACLs should be:
- list: (default)
- read: service:<resource_name>:read
- write: service:<resource_name>:write + service:<destination_name>:read (for any destination)
Ensure that configuring a FailoverPolicy for a service that is reachable via a xRoute or a direct upstream causes an envoy aggregate cluster to be created for the original cluster name, but with separate clusters for each one of the possible destinations.
FailoverPolicy resources contain inner Reference fields. We want to ensure
that components of those reference Tenancy fields left unspecified are defaulted
using the tenancy of the enclosing FailoverPolicy resource.
As the underlying helper being used to do the normalization calls the function
modified in #18822, it also means that the PeerName field will be set to "local" for
now automatically to avoid "local" != "" issues downstream.
* mesh-controller: handle L4 protocols for a proxy without upstreams
* sidecar-controller: Support explicit destinations for L4 protocols and single ports.
* This controller generates and saves ProxyStateTemplate for sidecar proxies.
* It currently supports single-port L4 ports only.
* It keeps a cache of all destinations to make it easier to compute and retrieve destinations.
* It will update the status of the pbmesh.Upstreams resource if anything is invalid.
* endpoints-controller: add workload identity to the service endpoints resource
* small fixes
* review comments
* Address PR comments
* sidecar-proxy controller: Add support for transparent proxy
This currently does not support inferring destinations from intentions.
* PR review comments
* mesh-controller: handle L4 protocols for a proxy without upstreams
* sidecar-controller: Support explicit destinations for L4 protocols and single ports.
* This controller generates and saves ProxyStateTemplate for sidecar proxies.
* It currently supports single-port L4 ports only.
* It keeps a cache of all destinations to make it easier to compute and retrieve destinations.
* It will update the status of the pbmesh.Upstreams resource if anything is invalid.
* endpoints-controller: add workload identity to the service endpoints resource
* small fixes
* review comments
* Make sure endpoint refs route to mesh port instead of an app port
* Address PR comments
* fixing copyright
* tidy imports
* sidecar-proxy controller: Add support for transparent proxy
This currently does not support inferring destinations from intentions.
* tidy imports
* add copyright headers
* Prefix sidecar proxy test files with source and destination.
* Update controller_test.go
---------
Co-authored-by: Iryna Shustava <iryna@hashicorp.com>
Co-authored-by: R.B. Boyer <rb@hashicorp.com>
Co-authored-by: github-team-consul-core <github-team-consul-core@hashicorp.com>
* This controller generates and saves ProxyStateTemplate for sidecar proxies.
* It currently supports single-port L4 ports only.
* It keeps a cache of all destinations to make it easier to compute and retrieve destinations.
* It will update the status of the pbmesh.Upstreams resource if anything is invalid.
* This commit also changes service endpoints to include workload identity. This made the implementation a bit easier as we don't need to look up as many workloads and instead rely on endpoints data.
We explicitly enumerate the allowed protocols in validation, so this
change is necessary to use the new enum value.
Also add tests for enum validators to ensure they stay aligned to
protos unless we explicitly want them to diverge.
* Adding explicit MPL license for sub-package
This directory and its subdirectories (packages) contain files licensed with the MPLv2 `LICENSE` file in this directory and are intentionally licensed separately from the BSL `LICENSE` file at the root of this repository.
* Adding explicit MPL license for sub-package
This directory and its subdirectories (packages) contain files licensed with the MPLv2 `LICENSE` file in this directory and are intentionally licensed separately from the BSL `LICENSE` file at the root of this repository.
* Updating the license from MPL to Business Source License
Going forward, this project will be licensed under the Business Source License v1.1. Please see our blog post for more details at <Blog URL>, FAQ at www.hashicorp.com/licensing-faq, and details of the license at www.hashicorp.com/bsl.
* add missing license headers
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
---------
Co-authored-by: hashicorp-copywrite[bot] <110428419+hashicorp-copywrite[bot]@users.noreply.github.com>
* Add ServiceEndpoints Mutation hook tests
* Move endpoint owner validation into the validation hook
Also there were some minor changes to error validation to account for go-cmp not liking to peer through an errors.errorstring type that get created by errors.New
* Implement a Catalog Controllers Lifecycle Integration Test
* Prevent triggering the race detector.
This allows defining some variables for protobuf constants and using those in comparisons. Without that, something internal in the fmt package ended up looking at the protobuf message size cache and triggering the race detector.
* Add a ReplaceType dep mapper and move them into their own file
* Implement the service endpoints controller
* Implement a Catalog Controllers Integration Test
Ganesh S
R.B. Boyer
Kumar Kavish
Matt Keeler
Ashesh Vidyut
Michael Zalimeni
Iryna Shustava
Semir Patel
John Murret
Dhia Ayachi
hashicorp-copywrite[bot]