Co-authored-by: Ashvitha Sridharan <ashvitha.sridharan@hashicorp.com>
Co-authored-by: Freddy <freddygv@users.noreply.github.com>
Add a new envoy flag: "envoy_hcp_metrics_bind_socket_dir", a directory
where a unix socket will be created with the name
`<namespace>_<proxy_id>.sock` to forward Envoy metrics.
If set, this will configure:
- In bootstrap configuration a local stats_sink and static cluster.
These will forward metrics to a loopback listener sent over xDS.
- A dynamic listener listening at the socket path that the previously
defined static cluster is sending metrics to.
- A dynamic cluster that will forward traffic received at this listener
to the hcp-metrics-collector service.
Reasons for having a static cluster pointing at a dynamic listener:
- We want to secure the metrics stream using TLS, but the stats sink can
only be defined in bootstrap config. With dynamic listeners/clusters
we can use the proxy's leaf certificate issued by the Connect CA,
which isn't available at bootstrap time.
- We want to intelligently route to the HCP collector. Configuring its
addreess at bootstrap time limits our flexibility routing-wise. More
on this below.
Reasons for defining the collector as an upstream in `proxycfg`:
- The HCP collector will be deployed as a mesh service.
- Certificate management is taken care of, as mentioned above.
- Service discovery and routing logic is automatically taken care of,
meaning that no code changes are required in the xds package.
- Custom routing rules can be added for the collector using discovery
chain config entries. Initially the collector is expected to be
deployed to each admin partition, but in the future could be deployed
centrally in the default partition. These config entries could even be
managed by HCP itself.
- When an envoy version is out of a supported range, we now return the envoy version being used as `major.minor.x` to indicate that it is the minor version at most that is incompatible
- When an envoy version is in the list of unsupported envoy versions we return back the envoy version in the error message as `major.minor.patch` as now the exact version matters.
Ensure nothing in the troubleshoot go module depends on consul's top level module. This is so we can import troubleshoot into consul-k8s and not import all of consul.
* turns troubleshoot into a go module [authored by @curtbushko]
* gets the envoy protos into the troubleshoot module [authored by @curtbushko]
* adds a new go module `envoyextensions` which has xdscommon and extensioncommon folders that both the xds package and the troubleshoot package can import
* adds testing and linting for the new go modules
* moves the unit tests in `troubleshoot/validateupstream` that depend on proxycfg/xds into the xds package, with a comment describing why those tests cannot be in the troubleshoot package
* fixes all the imports everywhere as a result of these changes
Co-authored-by: Curt Bushko <cbushko@gmail.com>
* Add support for envoy readiness flags
- add flags 'envoy-ready-bind-port` and `envoy-ready-bind-addr` on consul connect envoy to create a ready listener on that address.
Fix issue where TLS configuration was ignored for unix sockets in consul connect envoy.
Disable xds check on bootstrap mode and change check to warn only.
* add functions for returning the max and min Envoy major versions
- added an UnsupportedEnvoyVersions list
- removed an unused error from TestDetermineSupportedProxyFeaturesFromString
- modified minSupportedVersion to use the function for getting the Min Envoy major version. Using just the major version without the patch is equivalent to using `.0`
* added a function for executing the envoy --version command
- added a new exec.go file to not be locked to unix system
* added envoy version check when using consul connect envoy
* added changelog entry
* added docs change
* update go version to 1.18 for api and sdk, go mod tidy
* removes ioutil usage everywhere which was deprecated in go1.16 in favour of io and os packages. Also introduces a lint rule which forbids use of ioutil going forward.
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
Changes the sourcing of the envoy bootstrap configuration
to not use agent APIs and instead use the catalog(server) API.
This is done by passing a node-name flag to the command,
(which can only be used with proxy-id).
Also fixes a bug where the golden envoy bootstrap config files
used for tests did not use the expected destination service name
in certain places for connect proxy kind.
set -euo pipefail
unset CDPATH
cd "$(dirname "$0")"
for f in $(git grep '\brequire := require\.New(' | cut -d':' -f1 | sort -u); do
echo "=== require: $f ==="
sed -i '/require := require.New(t)/d' $f
# require.XXX(blah) but not require.XXX(tblah) or require.XXX(rblah)
sed -i 's/\brequire\.\([a-zA-Z0-9_]*\)(\([^tr]\)/require.\1(t,\2/g' $f
# require.XXX(tblah) but not require.XXX(t, blah)
sed -i 's/\brequire\.\([a-zA-Z0-9_]*\)(\(t[^,]\)/require.\1(t,\2/g' $f
# require.XXX(rblah) but not require.XXX(r, blah)
sed -i 's/\brequire\.\([a-zA-Z0-9_]*\)(\(r[^,]\)/require.\1(t,\2/g' $f
gofmt -s -w $f
done
for f in $(git grep '\bassert := assert\.New(' | cut -d':' -f1 | sort -u); do
echo "=== assert: $f ==="
sed -i '/assert := assert.New(t)/d' $f
# assert.XXX(blah) but not assert.XXX(tblah) or assert.XXX(rblah)
sed -i 's/\bassert\.\([a-zA-Z0-9_]*\)(\([^tr]\)/assert.\1(t,\2/g' $f
# assert.XXX(tblah) but not assert.XXX(t, blah)
sed -i 's/\bassert\.\([a-zA-Z0-9_]*\)(\(t[^,]\)/assert.\1(t,\2/g' $f
# assert.XXX(rblah) but not assert.XXX(r, blah)
sed -i 's/\bassert\.\([a-zA-Z0-9_]*\)(\(r[^,]\)/assert.\1(t,\2/g' $f
gofmt -s -w $f
done
The DebugConfig in the self endpoint can change at any time. It's not a stable API.
With the previous change to rename GRPCPort to XDSPort this command would have broken.
This commit adds the XDSPort to a stable part of the XDS api, and changes the envoy command to read
this new field.
It includes support for the old API as well, in case a newer CLI is used with an older API, and
adds a test for both cases.
Allows setting -prometheus-backend-port to configure the cluster
envoy_prometheus_bind_addr points to.
Allows setting -prometheus-scrape-path to configure which path
envoy_prometheus_bind_addr exposes metrics on.
-prometheus-backend-port is used by the consul-k8s metrics merging feature, to
configure envoy_prometheus_bind_addr to point to the merged metrics
endpoint that combines Envoy and service metrics so that one set of
annotations on a Pod can scrape metrics from the service and it's Envoy
sidecar.
-prometheus-scrape-path is used to allow configurability of the path
where prometheus metrics are exposed on envoy_prometheus_bind_addr.
Add a skip condition to all tests slower than 100ms.
This change was made using `gotestsum tool slowest` with data from the
last 3 CI runs of master.
See https://github.com/gotestyourself/gotestsum#finding-and-skipping-slow-tests
With this change:
```
$ time go test -count=1 -short ./agent
ok github.com/hashicorp/consul/agent 0.743s
real 0m4.791s
$ time go test -count=1 -short ./agent/consul
ok github.com/hashicorp/consul/agent/consul 4.229s
real 0m8.769s
```
This PR updates the tags that we generate for Envoy stats.
Several of these come with breaking changes, since we can't keep two stats prefixes for a filter.
* Add support for ingress-gateway in CLI command
- Supports -register command
- Creates a static Envoy listener that exposes only the /ready API so
that we can register a TCP healthcheck against the ingress gateway
itself
- Updates ServiceAddressValue.String() to be more in line with Value()
The api client should never rever to HTTP if the user explicitly
requested TLS. This change broke some tests because the tests always use
an non-TLS http server, but some tests explicitly enable TLS.
The new grpcAddress function contains all of the logic to translate the
command line options into the values used in the template.
The new type has two advantages.
1. It introduces a logical grouping of values in the BootstrapTplArgs
struct which is exceptionally large. This grouping makes the struct
easier to understand because each set of nested values can be seen
as a single entity.
2. It gives us a reasonable return value for this new function.
* add 1.12.2
* add envoy 1.13.0
* Introduce -envoy-version to get 1.10.0 passing.
* update old version and fix consul-exec case
* add envoy_version and fix check
* Update Envoy CLI tests to account for the 1.13 compatibility changes.
Co-authored-by: Matt Keeler <mkeeler@users.noreply.github.com>
Since generated envoy clusters all are named using (mostly) SNI syntax
we can have envoy read the various fields out of that structure and emit
it as stats labels to the various telemetry backends.
I changed the delimiter for the 'customization hash' from ':' to '~'
because ':' is always reencoded by envoy as '_' when generating metrics
keys.
* connect: allow overriding envoy listener bind_address
* Update agent/xds/config.go
Co-Authored-By: Kyle Havlovitz <kylehav@gmail.com>
* connect: allow overriding envoy listener bind_port
* envoy: support unix sockets for grpc in bootstrap
Add AgentSocket BootstrapTplArgs which if set overrides the AgentAddress
and AgentPort to generate a bootstrap which points Envoy to a unix
socket file instead of an ip:port.
* Add a test for passing the consul addr as a unix socket
* Fix config formatting for envoy bootstrap tests
* Fix listeners test cases for bind addr/port
* Update website/source/docs/connect/proxies/envoy.md
* Add support for HTTP proxy listeners
* Add customizable bootstrap configuration options
* Debug logging for xDS AuthZ
* Add Envoy Integration test suite with basic test coverage
* Add envoy command tests to cover new cases
* Add tracing integration test
* Add gRPC support WIP
* Merged changes from master Docker. get CI integration to work with same Dockerfile now
* Make docker build optional for integration
* Enable integration tests again!
* http2 and grpc integration tests and fixes
* Fix up command config tests
* Store all container logs as artifacts in circle on fail
* Add retries to outer part of stats measurements as we keep missing them in CI
* Only dump logs on failing cases
* Fix typos from code review
* Review tidying and make tests pass again
* Add debug logs to exec test.
* Fix legit test failure caused by upstream rename in envoy config
* Attempt to reduce cases of bad TLS handshake in CI integration tests
* bring up the right service
* Add prometheus integration test
* Add test for denied AuthZ both HTTP and TCP
* Try ANSI term for Circle
* Default gRPC port; Start on some basic tests for argument and ENV handling; Make Exec test less platform-dependent.
* Allow hot-restarts
* Remove debug
* Plumb xDS server and proxyxfg into the agent startup
* Add `consul connect envoy` command to allow running Envoy as a connect sidecar.
* Add test for help tabs; typos and style fixups from review
Ronald
Ashvitha
Chris S. Kim
Michael Wilkerson
Nitya Dhanushkodi
Ashwin Venkatesh
Dan Stough
Derek Menteer
Kyle Schochenmaier
Derek Menteer
Kyle Havlovitz
Riddhi Shah
R.B. Boyer
Evan Culver
freddygv
Daniel Nephin
R.B. Boyer
Freddy
Tim Arenz
Chris Piraino
Hans Hasselberg
Alvin Huang
Sarah Adams
Matt Keeler
Michael Schurter
Paul Banks