Split up unused key validation in config entry decode for oss/ent.
This is needed so that we can return an informative error in OSS if namespaces are provided.
Previously, we were only returning a single ListenerPort for a single
service. However, we actually allow a single service to be serviced over
multiple ports, as well as allow users to define what hostnames they
expect their services to be contacted over. When no hosts are defined,
we return the default ingress domain for any configured DNS domain.
To show this in the UI, we modify the gateway-services-nodes API to
return a GatewayConfig.Addresses field, which is a list of addresses
over which the specific service can be contacted.
This is in its own separate package so that it will be a separate test binary that runs thus isolating the go runtime from other tests and allowing accurate go routine leak checking.
This test would ideally use goleak.VerifyTestMain but that will fail 100% of the time due to some architectural things (blocking queries and net/rpc uncancellability).
This test is not comprehensive. We should enable/exercise more features and more cluster configurations. However its a start.
The old test case was a very specific regresion test for a case that is no longer possible.
Replaced with a new test that checks the default coordinate is returned.
We needed to pass a cancellable context into the limiter.Wait instead of context.Background. So I made the func take a context instead of a chan as most places were just passing through a Done chan from a context anyways.
Fix go routine leak in the gateway locator
This will allow to increase cache value when DC is not valid (aka
return SOA to avoid too many consecutive requests) and will
distinguish DC being temporarily not available from DC not existing.
Implements https://github.com/hashicorp/consul/issues/8102
On the servers they must have a certificate.
On the clients they just have to set verify_outgoing to true to attempt TLS connections for RPCs.
Eventually we may relax these restrictions but right now all of the settings we push down (acl tokens, acl related settings, certificates, gossip key) are sensitive and shouldn’t be transmitted over an unencrypted connection. Our guides and docs should recoommend verify_server_hostname on the clients as well.
Another reason to do this is weird things happen when making an insecure RPC when TLS is not enabled. Basically it tries TLS anyways. We should probably fix that to make it clearer what is going on.
The envisioned changes would allow extra settings to enable dynamically defined auth methods to be used instead of or in addition to the statically defined one in the configuration.
There are a couple of things in here.
First, just like auto encrypt, any Cluster.AutoConfig RPC will implicitly use the less secure RPC mechanism.
This drastically modifies how the Consul Agent starts up and moves most of the responsibilities (other than signal handling) from the cli command and into the Agent.
All commands which read config (agent, services, and validate) will now
print warnings when one of the config files is skipped because it did
not match an expected format.
Also ensures that config validate prints all warnings.
Right now this is only hooked into the insecure RPC server and requires JWT authorization. If no JWT authorizer is setup in the configuration then we inject a disabled “authorizer” to always report that JWT authorization is disabled.
While upgrading servers to a new version, I saw that metadata of
existing servers are not upgraded, so the version and raft meta
is not up to date in catalog.
The only way to do it was to:
* update Consul server
* make it leave the cluster, then metadata is accurate
That's because the optimization to avoid updating catalog does
not take into account metadata, so no update on catalog is performed.
And fix the 'value not used' issues.
Many of these are not bugs, but a few are tests not checking errors, and
one appears to be a missed error in non-test code.
A Node Identity is very similar to a service identity. Its main targeted use is to allow creating tokens for use by Consul agents that will grant the necessary permissions for all the typical agent operations (node registration, coordinate updates, anti-entropy).
Half of this commit is for golden file based tests of the acl token and role cli output. Another big updates was to refactor many of the tests in agent/consul/acl_endpoint_test.go to use the same style of tests and the same helpers. Besides being less boiler plate in the tests it also uses a common way of starting a test server with ACLs that should operate without any warnings regarding deprecated non-uuid master tokens etc.
Previously the logic for reading ConfigFiles and produces Sources was split
between NewBuilder and Build. This commit moves all of the logic into NewBuilder
so that Build() can operate entirely on Sources.
This change is in preparation for logging warnings when files have an
unsupported extension.
It also reduces the scope of BuilderOpts, and gets us very close to removing
Builder.options.
The nil value was never used. We can avoid a bunch of complications by
making the field a string value instead of a pointer.
This change is in preparation for fixing a silent config failure.
Flags is an overloaded term in this context. It generally is used to
refer to command line flags. This struct, however, is a data object
used as input to the construction.
It happens to be partially populated by command line flags, but
otherwise has very little to do with them.
Renaming this struct should make the actual responsibility of this struct
more obvious, and remove the possibility that it is confused with
command line flags.
This change is in preparation for adding additional fields to
BuilderOpts.
This field was populated for one reason, to test that it was empty.
Of all the callers, only a single one used this functionality. The rest
constructed a `Flags{}` struct which did not set Args.
I think this shows that the logic was in the wrong place. Only the agent
command needs to care about validating the args.
This commit removes the field, and moves the logic to the one caller
that cares.
Also fix some comments.
Passing the channel to the function which uses it significantly
reduces the scope of the variable, and makes its usage more explicit. It
also moves the initialization of the channel closer to where it is used.
Also includes a couple very small cleanups to remove a local var and
read the error from `ctx.Err()` directly instead of creating a channel
to check for an error.
This field was always read by the same function that populated the field,
so it does not need to be a field. Passing the value as an argument to
functions makes it more obvious where the value comes from, and also reduces
the scope of the variable significantly.
[The documentation for context](https://golang.org/pkg/context/)
recommends not storing context in a struct field:
> Do not store Contexts inside a struct type; instead, pass a Context
> explicitly to each function that needs it. The Context should be the
> first parameter, typically named ctx...
Sometimes there are good reasons to not follow this recommendation, but
in this case it seems easy enough to follow.
Also moved the ctx argument to be the first in one of the function calls
to follow the same recommendation.
Blocking queries issues will still be uncancellable (that cannot be helped until we get rid of net/rpc). However this makes it so that if calling getWithIndex (like during a cache Notify go routine) we can cancell the outer routine. Previously it would keep issuing more blocking queries until the result state actually changed.
Co-authored-by: Matt Keeler <mkeeler@users.noreply.github.com>
Currently when passing hostname clusters to Envoy, we set each service instance registered with Consul as an LbEndpoint for the cluster.
However, Envoy can only handle one per cluster:
[2020-06-04 18:32:34.094][1][warning][config] [source/common/config/grpc_subscription_impl.cc:87] gRPC config for type.googleapis.com/envoy.api.v2.Cluster rejected: Error adding/updating cluster(s) dc2.internal.ddd90499-9b47-91c5-4616-c0cbf0fc358a.consul: LOGICAL_DNS clusters must have a single locality_lb_endpoint and a single lb_endpoint, server.dc2.consul: LOGICAL_DNS clusters must have a single locality_lb_endpoint and a single lb_endpoint
Envoy is currently handling this gracefully by only picking one of the endpoints. However, we should avoid passing multiple to avoid these warning logs.
This PR:
* Ensures we only pass one endpoint, which is tied to one service instance.
* We prefer sending an endpoint which is marked as Healthy by Consul.
* If no endpoints are healthy we emit a warning and skip the cluster.
* If multiple unique hostnames are spread across service instances we emit a warning and let the user know which will be resolved.
In discussion with team, it was pointed out that query parameters tend
to be filter mechanism, and that semantically the "/v1/health/connect"
endpoint should return "all healthy connect-enabled endpoints (e.g.
could be side car proxies or native instances) for this service so I can
connect with mTLS".
That does not fit an ingress gateway, so we remove the query parameter
and add a new endpoint "/v1/health/ingress" that semantically means
"all the healthy ingress gateway instances that I can connect to
to access this connect-enabled service without mTLS"
Currently opaque config blocks (config entries, and CA provider config) are
modified by PatchSliceOfMaps, making it impossible for these opaque
config sections to contain slices of maps.
In order to fix this problem, any lazy-decoding of these blocks needs to support
weak decoding of []map[string]interface{} to a struct type before
PatchSliceOfMaps is replaces. This is necessary because these config
blobs are persisted, and during an upgrade an older version of Consul
could read one of the new configuration values, which would cause an error.
To support the upgrade path, this commit first introduces the new hooks
for weak decoding of []map[string]interface{} and uses them only in the
lazy-decode paths. That way, in a future release, new style
configuration will be supported by the older version of Consul.
This decode hook has a number of advantages:
1. It no longer panics. It allows mapstructure to report the error
2. It no longer requires the user to declare which fields are slices of
structs. It can deduce that information from the 'to' value.
3. It will make it possible to preserve opaque configuration, allowing
for structured opaque config.
* Fixes#5606: Tokens converted from legacy ACLs get their Hash computed
This allows new style token replication to work for legacy tokens as well when they change.
* tests: fix timestamp comparison
Co-authored-by: Matt Keeler <mjkeeler7@gmail.com>
Previously, we did not require the 'service-name.*' host header value
when on a single http service was exposed. However, this allows a user
to get into a situation where, if they add another service to the
listener, suddenly the previous service's traffic might not be routed
correctly. Thus, we always require the Host header, even if there is
only 1 service.
Also, we add the make the default domain matching more restrictive by
matching "service-name.ingress.*" by default. This lines up better with
the namespace case and more accurately matches the Consul DNS value we
expect people to use in this case.
This allows the operator to disable agent caching for the http endpoint.
It is on by default for backwards compatibility and if disabled will
ignore the url parameter `cached`.
Found using staticcheck.
binary.Write does not accept int types without a size. The error from binary.Write was ignored, so we never saw this error. Casting the data to uint64 produces a correct hash.
Also deprecate the Default{Addr,Port} fields, and prevent them from being encoded. These fields will always be empty and are not used.
Removing these would break backwards compatibility, so they are left in place for now.
Co-authored-by: Hans Hasselberg <me@hans.io>
In current implementation of Consul, check alias cannot determine
if a service exists or not. Because a service without any check
is semantically considered as passing, so when no healthchecks
are found for an agent, the check was considered as passing.
But this make little sense as the current implementation does not
make any difference between:
* a non-existing service (passing)
* a service without any check (passing as well)
In order to make it work, we have to ensure that when a check did
not find any healthcheck, the service does indeed exists. If it
does not, lets consider the check as failing.
The DNS resolution will be handled by Envoy and defaults to LOGICAL_DNS. This discovery type can be overridden on a per-gateway basis with the envoy_dns_discovery_type Gateway Option.
If a service contains an instance with a hostname as an address we set the Envoy cluster to use DNS as the discovery type rather than EDS. Since both mesh gateways and terminating gateways route to clusters using SNI, whenever there is a mix of hostnames and IP addresses associated with a service we use the hostname + CDS rather than the IPs + EDS.
Note that we detect hostnames by attempting to parse the service instance's address as an IP. If it is not a valid IP we assume it is a hostname.
The ACL.GetPolicy RPC endpoint was supposed to return the “parent” policy and not always the default policy. In the case of legacy management tokens the parent policy was supposed to be “manage”. The result of us not sending this properly was that operations that required specifically a management token such as saving a snapshot would not work in secondary DCs until they were upgraded.
* testing: replace most goe/verify.Values with require.Equal
One difference between these two comparisons is that go/verify considers
nil slices/maps to be equal to empty slices/maps, where as testify/require
does not, and does not appear to provide any way to enable that behaviour.
Because of this difference some expected values were changed from empty
slices to nil slices, and some calls to verify.Values were left.
* Remove github.com/pascaldekloe/goe/verify
Reduce the number of assertion packages we use from 2 to 1
In the past TLS usage was enforced with these variables, but these days
this decision is made by TLSConfigurator and there is no reason to keep
using the variables.
The version field has been used to decide which multiplexing to use. It
was introduced in 2457293dce. But this is
6y ago and there is no need for this differentiation anymore.
Three of the checks are temporarily disabled to limit the size of the
diff, and allow us to enable all the other checks in CI.
In a follow up we can fix the issues reported by the other checks one
at a time, and enable them.
The main fix here is to always union the `primary-gateways` list with
the list of mesh gateways in the primary returned from the replicated
federation states list. This will allow any replicated (incorrect) state
to be supplemented with user-configured (correct) state in the config
file. Eventually the game of random selection whack-a-mole will pick a
winning entry and re-replicate the latest federation states from the
primary. If the user-configured state is actually the incorrect one,
then the same eventual correct selection process will work in that case,
too.
The secondary fix is actually to finish making wanfed-via-mgws actually
work as originally designed. Once a secondary datacenter has replicated
federation states for the primary AND managed to stand up its own local
mesh gateways then all of the RPCs from a secondary to the primary
SHOULD go through two sets of mesh gateways to arrive in the consul
servers in the primary (one hop for the secondary datacenter's mesh
gateway, and one hop through the primary datacenter's mesh gateway).
This was neglected in the initial implementation. While everything
works, ideally we should treat communications that go around the mesh
gateways as just provided for bootstrapping purposes.
Now we heuristically use the success/failure history of the federation
state replicator goroutine loop to determine if our current mesh gateway
route is working as intended. If it is, we try using the local gateways,
and if those don't work we fall back on trying the primary via the union
of the replicated state and the go-discover configuration flags.
This can be improved slightly in the future by possibly initializing the
gateway choice to local on startup if we already have replicated state.
This PR does not address that improvement.
Fixes#7339
* Standardize support for Tagged and BindAddresses in Ingress Gateways
This updates the TaggedAddresses and BindAddresses behavior for Ingress
to match Mesh/Terminating gateways. The `consul connect envoy` command
now also allows passing an address without a port for tagged/bind
addresses.
* Update command/connect/envoy/envoy.go
Co-authored-by: Freddy <freddygv@users.noreply.github.com>
* PR comments
* Check to see if address is an actual IP address
* Update agent/xds/listeners.go
Co-authored-by: Freddy <freddygv@users.noreply.github.com>
* fix whitespace
Co-authored-by: Chris Piraino <cpiraino@hashicorp.com>
Co-authored-by: Freddy <freddygv@users.noreply.github.com>
Currently checks of type gRPC will emit log messages such as,
2020/02/12 13:48:22 [INFO] parsed scheme: ""
2020/02/12 13:48:22 [INFO] scheme "" not registered, fallback to default scheme
Without adding full support for using custom gRPC schemes (maybe that's
right long-term path) we can just supply the default scheme as provided
by the grpc library.
Fixes https://github.com/hashicorp/consul/issues/7274
and https://github.com/hashicorp/nomad/issues/7415
Errors are values. We can use the error value to identify the 'comparison failed' case which makes the function easier to use and should make it harder to miss handle the error case
Based on work done in https://github.com/hashicorp/memberlist/pull/196
this allows to restrict the IP ranges that can join a given Serf cluster
and be a member of the cluster.
Restrictions on IPs can be done separatly using 2 new differents flags
and config options to restrict IPs for LAN and WAN Serf.
Handling errors at the end of a log switch/case block is somewhat
brittle. This block included a couple cases where errors were ignored,
but it was not obvious the way it was written.
This change moves all error handling into each case block. There is
still potentially one case where err is ignored, which will be handled
in a follow up.
Some of these problems are minor (unused vars), but others are real bugs (ignored errors).
Co-authored-by: Matt Keeler <mkeeler@users.noreply.github.com>
This commit converts the previous error into just a Warn-level log
message. By returning an error when the requested service was not a
gateway, we did not appropriately update envoy because the cache Fetch
returned an error and thus did not propagate the update through proxycfg
and xds packages.
Previously this happened to be using the method on the Server/Client that was meant to allow the ACLResolver to locally resolve tokens. On Servers that had tokens (primary or secondary dc + token replication) this function would lookup the token from raft and return the ACLIdentity. On clients this was always a noop. We inadvertently used this function instead of creating a new one when we added logging accessor ids for permission denied RPC requests.
With this commit, a new method is used for resolving the identity properly via the ACLResolver which may still resolve locally in the case of being on a server with tokens but also supports remote token resolution.
* Return early from updateGatewayServices if nothing to update
Previously, we returned an empty slice of gatewayServices, which caused
us to accidentally delete everything in the memdb table
* PR comment and better formatting
go test will only run tests in parallel within a single package. In this case the package test run time is exactly the same with or without t.Parallel() (~0.7s).
In generally we should avoid t.Parallel() as it causes a number of problems with `go test` not reporting failure messages correctly. I encountered one of these problems, which is what prompted this change. Since `t.Parallel` is not providing any benefit in this package, this commit removes it.
The change was automated with:
git grep -l 't.Parallel' | xargs sed -i -e '/t.Parallel/d'
This is useful when updating an config entry with no services, and the
expected behavior is that envoy closes all listeners and clusters.
We also allow empty routes because ingress gateways name route
configurations based on the port of the listener, so it is important we
remove any stale routes. Then, if a new listener with an old port is
added, we will not have to deal with stale routes hanging around routing
to the wrong place.
Endpoints are associated with clusters, and thus by deleting the
clusters we don't have to care about sending empty endpoint responses.
- Use correct enterprise metadata for finding config entry
- nil out cancel functions on config snapshot copy
- Look at HostsSet when checking validity
We require any non-wildcard services to match the protocol defined in
the listener on write, so that we can maintain a consistent experience
through ingress gateways. This also helps guard against accidental
misconfiguration by a user.
- Update tests that require an updated protocol for ingress gateways
We can only allow host names that are valid domain names because we put
these hosts into a DNSSAN. In addition, we validate that the wildcard
specifier '*' is only present as the leftmost label to allow for a
wildcard DNSSAN and associated wildcard Host routing in the ingress
gateway proxy.
This now requires some type of protocol setting in ingress gateway tests
to ensure the services are not filtered out.
- small refactor to add a max(x, y) function
- Use internal configEntryTxn function and add MaxUint64 to lib
- Validate that this cannot be set on a 'tcp' listener nor on a wildcard
service.
- Add Hosts field to api and test in consul config write CLI
- xds: Configure envoy with user-provided hosts from ingress gateways
This commit adds the necessary changes to allow an ingress gateway to
route traffic from a single defined port to multiple different upstream
services in the Consul mesh.
To do this, we now require all HTTP requests coming into the ingress
gateway to specify a Host header that matches "<service-name>.*" in
order to correctly route traffic to the correct service.
- Differentiate multiple listener's route names by port
- Adds a case in xds for allowing default discovery chains to create a
route configuration when on an ingress gateway. This allows default
services to easily use host header routing
- ingress-gateways have a single route config for each listener
that utilizes domain matching to route to different services.
This will emit warnings about the configs not doing anything but still allow them to be parsed.
This also added the warnings for enterprise fields that we already had in OSS but didn’t change their enforcement behavior. For example, attempting to use a network segment will cause a hard error in OSS.
This is a collection of refactors that make upcoming PRs easier to digest.
The main change is the introduction of the authmethod.Identity struct.
In the one and only current auth method (type=kubernetes) all of the
trusted identity attributes are both selectable and projectable, so they
were just passed around as a map[string]string.
When namespaces were added, this was slightly changed so that the
enterprise metadata can also come back from the login operation, so
login now returned two fields.
Now with some upcoming auth methods it won't be true that all identity
attributes will be both selectable and projectable, so rather than
update the login function to return 3 pieces of data it seemed worth it
to wrap those fields up and give them a proper name.
Also ensure that WatchSets in tests are reset between calls to watchFired.
Any time a watch fires, subsequent calls to watchFired on the same WatchSet
will also return true even if there were no changes.
Matt Keeler
Freddy
Daniel Nephin
Matt Keeler
Chris Piraino
gitforbit
R.B. Boyer
freddygv
Pierre Souchay
Paul Banks
Hans Hasselberg
Kyle Havlovitz
Daniel Nephin
Alvin Huang
Jono Sosulska
hashicorp-ci
Raphaël Rondeau
Seth Hoenig
Aleksandr Zagaevskiy
Kit Patella
Drew Bailey