go test will only run tests in parallel within a single package. In this case the package test run time is exactly the same with or without t.Parallel() (~0.7s).
In generally we should avoid t.Parallel() as it causes a number of problems with `go test` not reporting failure messages correctly. I encountered one of these problems, which is what prompted this change. Since `t.Parallel` is not providing any benefit in this package, this commit removes it.
The change was automated with:
git grep -l 't.Parallel' | xargs sed -i -e '/t.Parallel/d'
We can only allow host names that are valid domain names because we put
these hosts into a DNSSAN. In addition, we validate that the wildcard
specifier '*' is only present as the leftmost label to allow for a
wildcard DNSSAN and associated wildcard Host routing in the ingress
gateway proxy.
- Validate that this cannot be set on a 'tcp' listener nor on a wildcard
service.
- Add Hosts field to api and test in consul config write CLI
- xds: Configure envoy with user-provided hosts from ingress gateways
This commit adds the necessary changes to allow an ingress gateway to
route traffic from a single defined port to multiple different upstream
services in the Consul mesh.
To do this, we now require all HTTP requests coming into the ingress
gateway to specify a Host header that matches "<service-name>.*" in
order to correctly route traffic to the correct service.
- Differentiate multiple listener's route names by port
- Adds a case in xds for allowing default discovery chains to create a
route configuration when on an ingress gateway. This allows default
services to easily use host header routing
- ingress-gateways have a single route config for each listener
that utilizes domain matching to route to different services.
This makes it so that both OSS and enterprise tests pass correctly
In the api tests, explicitly set namespace to empty string so that tests
can be shared.
* Implements a simple, tcp ingress gateway workflow
This adds a new type of gateway for allowing Ingress traffic into Connect from external services.
Co-authored-by: Chris Piraino <cpiraino@hashicorp.com>
The Init method provided the same functionality as the New constructor.
The constructor is both more widely used, and more idiomatic, so remove
the Init method.
This change is in preparation for fixing printing of these IDs.
* Enable filtering language support for the v1/connect/intentions listing API
* Update website for filtering of Intentions
* Update website/source/api/connect/intentions.html.md
This config entry will be used to configure terminating gateways.
It accepts the name of the gateway and a list of services the gateway will represent.
For each service users will be able to specify: its name, namespace, and additional options for TLS origination.
Co-authored-by: Kyle Havlovitz <kylehav@gmail.com>
Co-authored-by: Chris Piraino <cpiraino@hashicorp.com>
* Add Ingress gateway config entry and other relevant structs
* Add api package tests for ingress gateways
* Embed EnterpriseMeta into ingress service struct
* Add namespace fields to api module and test consul config write decoding
* Don't require a port for ingress gateways
* Add snakeJSON and camelJSON cases in command test
* Run Normalize on service's ent metadata
Sadly cannot think of a way to test this in OSS.
* Every protocol requires at least 1 service
* Validate ingress protocols
* Update agent/structs/config_entry_gateways.go
Co-authored-by: Chris Piraino <cpiraino@hashicorp.com>
Co-authored-by: Freddy <freddygv@users.noreply.github.com>
This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch:
There are several distinct chunks of code that are affected:
* new flags and config options for the server
* retry join WAN is slightly different
* retry join code is shared to discover primary mesh gateways from secondary datacenters
* because retry join logic runs in the *agent* and the results of that
operation for primary mesh gateways are needed in the *server* there are
some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur
at multiple layers of abstraction just to pass the data down to the right
layer.
* new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers
* the function signature for RPC dialing picked up a new required field (the
node name of the destination)
* several new RPCs for manipulating a FederationState object:
`FederationState:{Apply,Get,List,ListMeshGateways}`
* 3 read-only internal APIs for debugging use to invoke those RPCs from curl
* raft and fsm changes to persist these FederationStates
* replication for FederationStates as they are canonically stored in the
Primary and replicated to the Secondaries.
* a special derivative of anti-entropy that runs in secondaries to snapshot
their local mesh gateway `CheckServiceNodes` and sync them into their upstream
FederationState in the primary (this works in conjunction with the
replication to distribute addresses for all mesh gateways in all DCs to all
other DCs)
* a "gateway locator" convenience object to make use of this data to choose
the addresses of gateways to use for any given RPC or gossip operation to a
remote DC. This gets data from the "retry join" logic in the agent and also
directly calls into the FSM.
* RPC (`:8300`) on the server sniffs the first byte of a new connection to
determine if it's actually doing native TLS. If so it checks the ALPN header
for protocol determination (just like how the existing system uses the
type-byte marker).
* 2 new kinds of protocols are exclusively decoded via this native TLS
mechanism: one for ferrying "packet" operations (udp-like) from the gossip
layer and one for "stream" operations (tcp-like). The packet operations
re-use sockets (using length-prefixing) to cut down on TLS re-negotiation
overhead.
* the server instances specially wrap the `memberlist.NetTransport` when running
with gateway federation enabled (in a `wanfed.Transport`). The general gist is
that if it tries to dial a node in the SAME datacenter (deduced by looking
at the suffix of the node name) there is no change. If dialing a DIFFERENT
datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh
gateways to eventually end up in a server's :8300 port.
* a new flag when launching a mesh gateway via `consul connect envoy` to
indicate that the servers are to be exposed. This sets a special service
meta when registering the gateway into the catalog.
* `proxycfg/xds` notice this metadata blob to activate additional watches for
the FederationState objects as well as the location of all of the consul
servers in that datacenter.
* `xds:` if the extra metadata is in place additional clusters are defined in a
DC to bulk sink all traffic to another DC's gateways. For the current
datacenter we listen on a wildcard name (`server.<dc>.consul`) that load
balances all servers as well as one mini-cluster per node
(`<node>.server.<dc>.consul`)
* the `consul tls cert create` command got a new flag (`-node`) to help create
an additional SAN in certs that can be used with this flavor of federation.
We set RawToString=true so that []uint8 => string when decoding an interface{}.
We set the MapType so that map[interface{}]interface{} decodes to map[string]interface{}.
Add tests to ensure that this doesn't break existing usages.
Fixes#7223
* Updates to the Txn API for namespaces
* Update agent/consul/txn_endpoint.go
Co-Authored-By: R.B. Boyer <rb@hashicorp.com>
Co-authored-by: R.B. Boyer <public@richardboyer.net>
Currently when using the built-in CA provider for Connect, root certificates are valid for 10 years, however secondary DCs get intermediates that are valid for only 1 year. There is no mechanism currently short of rotating the root in the primary that will cause the secondary DCs to renew their intermediates.
This PR adds a check that renews the cert if it is half way through its validity period.
In order to be able to test these changes, a new configuration option was added: IntermediateCertTTL which is set extremely low in the tests.
* Use consts for well known tagged adress keys
* Add ipv4 and ipv6 tagged addresses for node lan and wan
* Add ipv4 and ipv6 tagged addresses for service lan and wan
* Use IPv4 and IPv6 address in DNS
* Renamed structs.IntentionWildcard to structs.WildcardSpecifier
* Refactor ACL Config
Get rid of remnants of enterprise only renaming.
Add a WildcardName field for specifying what string should be used to indicate a wildcard.
* Add wildcard support in the ACL package
For read operations they can call anyAllowed to determine if any read access to the given resource would be granted.
For write operations they can call allAllowed to ensure that write access is granted to everything.
* Make v1/agent/connect/authorize namespace aware
* Update intention ACL enforcement
This also changes how intention:read is granted. Before the Intention.List RPC would allow viewing an intention if the token had intention:read on the destination. However Intention.Match allowed viewing if access was allowed for either the source or dest side. Now Intention.List and Intention.Get fall in line with Intention.Matches previous behavior.
Due to this being done a few different places ACL enforcement for a singular intention is now done with the CanRead and CanWrite methods on the intention itself.
* Refactor Intention.Apply to make things easier to follow.
• Renamed EnterpriseACLConfig to just Config
• Removed chained_authorizer_oss.go as it was empty
• Renamed acl.go to errors.go to more closely describe its contents
Ensure we close the Sentinel Evaluator so as not to leak go routines
Fix a bunch of test logging so that various warnings when starting a test agent go to the ltest logger and not straight to stdout.
Various canned ent meta types always return a valid pointer (no more nils). This allows us to blindly deref + assign in various places.
Update ACL index tracking to ensure oss -> ent upgrades will work as expected.
Update ent meta parsing to include function to disallow wildcarding.
Also update the Docs and fixup the HTTP API to return proper errors when someone attempts to use Namespaces with an OSS agent.
Add Namespace HTTP API docs
Make all API endpoints disallow unknown fields
* Implement endpoint to query whether the given token is authorized for a set of operations
* Updates to allow for remote ACL authorization via RPC
This is only used when making an authorization request to a different datacenter.
* Update AWS SDK to use PCA features.
* Add AWS PCA provider
* Add plumbing for config, config validation tests, add test for inheriting existing CA resources created by user
* Unparallel the tests so we don't exhaust PCA limits
* Merge updates
* More aggressive polling; rate limit pass through on sign; Timeout on Sign and CA create
* Add AWS PCA docs
* Fix Vault doc typo too
* Doc typo
* Apply suggestions from code review
Co-Authored-By: R.B. Boyer <rb@hashicorp.com>
Co-Authored-By: kaitlincarter-hc <43049322+kaitlincarter-hc@users.noreply.github.com>
* Doc fixes; tests for erroring if State is modified via API
* More review cleanup
* Uncomment tests!
* Minor suggested clean ups
* Support Connect CAs that can't cross sign
* revert spurios mod changes from make tools
* Add log warning when forcing CA rotation
* Fixup SupportsCrossSigning to report errors and work with Plugin interface (fixes tests)
* Fix failing snake_case test
* Remove misleading comment
* Revert "Remove misleading comment"
This reverts commit bc4db9cabed8ad5d0e39b30e1fe79196d248349c.
* Remove misleading comment
* Regen proto files messed up by rebase
* pass logger through to provider
* test for proper operation of NeedsLogger
* remove public testServer function
* Ooops actually set the logger in all the places we need it - CA config set wasn't and causing segfault
* Fix all the other places in tests where we set the logger
* Allow CA Providers to persist some state
* Update CA provider plugin interface
* Fix plugin stubs to match provider changes
* Update agent/connect/ca/provider.go
Co-Authored-By: R.B. Boyer <rb@hashicorp.com>
* Cleanup review comments
* Allow RSA CA certs for consul and vault providers to correctly sign EC leaf certs.
* Ensure key type ad bits are populated from CA cert and clean up tests
* Add integration test and fix error when initializing secondary CA with RSA key.
* Add more tests, fix review feedback
* Update docs with key type config and output
* Apply suggestions from code review
Co-Authored-By: R.B. Boyer <rb@hashicorp.com>
Main Changes:
• method signature updates everywhere to account for passing around enterprise meta.
• populate the EnterpriseAuthorizerContext for all ACL related authorizations.
• ACL resource listings now operate like the catalog or kv listings in that the returned entries are filtered down to what the token is allowed to see. With Namespaces its no longer all or nothing.
• Modified the acl.Policy parsing to abstract away basic decoding so that enterprise can do it slightly differently. Also updated method signatures so that when parsing a policy it can take extra ent metadata to use during rules validation and policy creation.
Secondary Changes:
• Moved protobuf encoding functions out of the agentpb package to eliminate circular dependencies.
• Added custom JSON unmarshalers for a few ACL resource types (to support snake case and to get rid of mapstructure)
• AuthMethod validator cache is now an interface as these will be cached per-namespace for Consul Enterprise.
• Added checks for policy/role link existence at the RPC API so we don’t push the request through raft to have it fail internally.
• Forward ACL token delete request to the primary datacenter when the secondary DC doesn’t have the token.
• Added a bunch of ACL test helpers for inserting ACL resource test data.
* ACL Authorizer overhaul
To account for upcoming features every Authorization function can now take an extra *acl.EnterpriseAuthorizerContext. These are unused in OSS and will always be nil.
Additionally the acl package has received some thorough refactoring to enable all of the extra Consul Enterprise specific authorizations including moving sentinel enforcement into the stubbed structs. The Authorizer funcs now return an acl.EnforcementDecision instead of a boolean. This improves the overall interface as it makes multiple Authorizers easily chainable as they now indicate whether they had an authoritative decision or should use some other defaults. A ChainedAuthorizer was added to handle this Authorizer enforcement chain and will never itself return a non-authoritative decision.
* Include stub for extra enterprise rules in the global management policy
* Allow for an upgrade of the global-management policy
A check may be set to become passing/critical only if a specified number of successive
checks return passing/critical in a row. Status will stay identical as before until
the threshold is reached.
This feature is available for HTTP, TCP, gRPC, Docker & Monitor checks.
This fixes an issue where leaf certificates issued in secondary
datacenters would be reissued very frequently (every ~20 seconds)
because the logic meant to detect root rotation was errantly triggering
because a hash of the ultimate root (in the primary) was being compared
against a hash of the local intermediate root (in the secondary) and
always failing.
In a previous PR I made it so that we had interfaces that would work enough to allow blockingQueries to work. However to complete this we need all fields to be settable and gettable.
Notes:
• If Go ever gets contracts/generics then we could get rid of all the Getters/Setters
• protoc / protoc-gen-gogo are going to generate all the getters for us.
• I copied all the getters/setters from the protobuf funcs into agent/structs/protobuf_compat.go
• Also added JSON marshaling funcs that use jsonpb for protobuf types.
Fixes: #5396
This PR adds a proxy configuration stanza called expose. These flags register
listeners in Connect sidecar proxies to allow requests to specific HTTP paths from outside of the node. This allows services to protect themselves by only
listening on the loopback interface, while still accepting traffic from non
Connect-enabled services.
Under expose there is a boolean checks flag that would automatically expose all
registered HTTP and gRPC check paths.
This stanza also accepts a paths list to expose individual paths. The primary
use case for this functionality would be to expose paths for third parties like
Prometheus or the kubelet.
Listeners for requests to exposed paths are be configured dynamically at run
time. Any time a proxy, or check can be registered, a listener can also be
created.
In this initial implementation requests to these paths are not
authenticated/encrypted.
* Add build system support for protobuf generation
This is done generically so that we don’t have to keep updating the makefile to add another proto generation.
Note: anything not in the vendor directory and with a .proto extension will be run through protoc if the corresponding namespace.pb.go file is not up to date.
If you want to rebuild just a single proto file you can do so with: make proto-rebuild PROTOFILES=<list of proto files to rebuild>
Providing the PROTOFILES var will override the default behavior of finding all the .proto files.
* Start adding types to the agent/proto package
These will be needed for some other work and are by no means comprehensive.
* Add ability to resolve/fixup the agentpb.ACLLinks structure in the state store.
* Use protobuf marshalling of raft requests instead of msgpack for protoc generated types.
This does not change any encoding of existing types.
* Removed structs package automatically encoding with protobuf marshalling
Instead the caller of raftApply that wants to opt-in to protobuf encoding will have to call `raftApplyProtobuf`
* Run update-vendor to fixup modules.txt
Nothing changed as far as dependencies go but the ordering of modules in that file depends on the time they are first seen and its not alphabetical.
* Rename some things and implement the structs.RPCInfo interface bits
agentpb.QueryOptions and agentpb.WriteRequest implement 3 of the 4 RPCInfo funcs and the new TargetDatacenter message type implements the fourth.
* Use the right encoding function.
* Renamed agent/proto package to agent/agentpb to prevent package name conflicts
* Update modules.txt to fix ordering
* Change blockingQuery to take in interfaces for the query options and meta
* Add %T to error output.
* Add/Update some comments
Compiling this will set an optional SNI field on each DiscoveryTarget.
When set this value should be used for TLS connections to the instances
of the target. If not set the default should be used.
Setting ExternalSNI will disable mesh gateway use for that target. It also
disables several service-resolver features that do not make sense for an
external service.
If the entry is updated for reasons other than protocol it is surprising
that the value is explicitly persisted as 'tcp' rather than leaving it
empty and letting it fall back dynamically on the proxy-defaults value.
Add parameter local-only to operator keyring list requests to force queries to only hit local servers (no WAN traffic).
HTTP API: GET /operator/keyring?local-only=true
CLI: consul keyring -list --local-only
Sending the local-only flag with any non-GET/list request will result in an error.
Failover is pushed entirely down to the data plane by creating envoy
clusters and putting each successive destination in a different load
assignment priority band. For example this shows that normally requests
go to 1.2.3.4:8080 but when that fails they go to 6.7.8.9:8080:
- name: foo
load_assignment:
cluster_name: foo
policy:
overprovisioning_factor: 100000
endpoints:
- priority: 0
lb_endpoints:
- endpoint:
address:
socket_address:
address: 1.2.3.4
port_value: 8080
- priority: 1
lb_endpoints:
- endpoint:
address:
socket_address:
address: 6.7.8.9
port_value: 8080
Mesh gateways route requests based solely on the SNI header tacked onto
the TLS layer. Envoy currently only lets you configure the outbound SNI
header at the cluster layer.
If you try to failover through a mesh gateway you ideally would
configure the SNI value per endpoint, but that's not possible in envoy
today.
This PR introduces a simpler way around the problem for now:
1. We identify any target of failover that will use mesh gateway mode local or
remote and then further isolate any resolver node in the compiled discovery
chain that has a failover destination set to one of those targets.
2. For each of these resolvers we will perform a small measurement of
comparative healths of the endpoints that come back from the health API for the
set of primary target and serial failover targets. We walk the list of targets
in order and if any endpoint is healthy we return that target, otherwise we
move on to the next target.
3. The CDS and EDS endpoints both perform the measurements in (2) for the
affected resolver nodes.
4. For CDS this measurement selects which TLS SNI field to use for the cluster
(note the cluster is always going to be named for the primary target)
5. For EDS this measurement selects which set of endpoints will populate the
cluster. Priority tiered failover is ignored.
One of the big downsides to this approach to failover is that the failover
detection and correction is going to be controlled by consul rather than
deferring that entirely to the data plane as with the prior version. This also
means that we are bound to only failover using official health signals and
cannot make use of data plane signals like outlier detection to affect
failover.
In this specific scenario the lack of data plane signals is ok because the
effectiveness is already muted by the fact that the ultimate destination
endpoints will have their data plane signals scrambled when they pass through
the mesh gateway wrapper anyway so we're not losing much.
Another related fix is that we now use the endpoint health from the
underlying service, not the health of the gateway (regardless of
failover mode).
In addition to exposing compilation over the API cleaned up the structures that would be exchanged to be cleaner and easier to support and understand.
Also removed ability to configure the envoy OverprovisioningFactor.
This should make them better for sending over RPC or the API.
Instead of a chain implemented explicitly like a linked list (nodes
holding pointers to other nodes) instead switch to a flat map of named
nodes with nodes linking other other nodes by name. The shipped
structure is just a map and a string to indicate which key to start
from.
Other changes:
* inline the compiler option InferDefaults as true
* introduce compiled target config to avoid needing to send back
additional maps of Resolvers; future target-specific compiled state
can go here
* move compiled MeshGateway out of the Resolver and into the
TargetConfig where it makes more sense.
* connect: reconcile how upstream configuration works with discovery chains
The following upstream config fields for connect sidecars sanely
integrate into discovery chain resolution:
- Destination Namespace/Datacenter: Compilation occurs locally but using
different default values for namespaces and datacenters. The xDS
clusters that are created are named as they normally would be.
- Mesh Gateway Mode (single upstream): If set this value overrides any
value computed for any resolver for the entire discovery chain. The xDS
clusters that are created may be named differently (see below).
- Mesh Gateway Mode (whole sidecar): If set this value overrides any
value computed for any resolver for the entire discovery chain. If this
is specifically overridden for a single upstream this value is ignored
in that case. The xDS clusters that are created may be named differently
(see below).
- Protocol (in opaque config): If set this value overrides the value
computed when evaluating the entire discovery chain. If the normal chain
would be TCP or if this override is set to TCP then the result is that
we explicitly disable L7 Routing and Splitting. The xDS clusters that
are created may be named differently (see below).
- Connect Timeout (in opaque config): If set this value overrides the
value for any resolver in the entire discovery chain. The xDS clusters
that are created may be named differently (see below).
If any of the above overrides affect the actual result of compiling the
discovery chain (i.e. "tcp" becomes "grpc" instead of being a no-op
override to "tcp") then the relevant parameters are hashed and provided
to the xDS layer as a prefix for use in naming the Clusters. This is to
ensure that if one Upstream discovery chain has no overrides and
tangentially needs a cluster named "api.default.XXX", and another
Upstream does have overrides for "api.default.XXX" that they won't
cross-pollinate against the operator's wishes.
Fixes#6159
* connect: validate upstreams and prevent duplicates
* Actually run Upstream.Validate() instead of ignoring it as dead code.
* Prevent two upstreams from declaring the same bind address and port.
It wouldn't work anyway.
* Prevent two upstreams from being declared that use the same
type+name+namespace+datacenter. Due to how the Upstream.Identity()
function worked this ended up mostly being enforced in xDS at use-time,
but it should be enforced more clearly at register-time.
* Allow setting the mesh gateway mode for an upstream in config files
* Add envoy integration test for mesh gateways
This necessitated many supporting changes in most of the other test cases.
Add remote mode mesh gateways integration test
The main change is that we no longer filter service instances by health,
preferring instead to render all results down into EDS endpoints in
envoy and merely label the endpoints as HEALTHY or UNHEALTHY.
When OnlyPassing is set to true we will force consul checks in a
'warning' state to render as UNHEALTHY in envoy.
Fixes#6171
* Update go-bexpr to v0.1.1
This brings in:
• `in`/`not in` operators to do substring matching
• `matches` / `not matches` operators to perform regex string matching.
* Add the capability to auto-generate the filtering selector ops tables for our docs
* Ensure the mesh gateway configuration comes back in the api within each upstream
* Add a test for the MeshGatewayConfig in the ToAPI functions
* Ensure we don’t use gateways for dc local connections
* Update the svc kind index for deletions
* Replace the proxycfg.state cache with an interface for testing
Also start implementing proxycfg state testing.
* Update the state tests to verify some gateway watches for upstream-targets of a discovery chain.
Also:
- add back an internal http endpoint to dump a compiled discovery chain for debugging purposes
Before the CompiledDiscoveryChain.IsDefault() method would test:
- is this chain just one resolver step?
- is that resolver step just the default?
But what I forgot to test:
- is that resolver step for the same service that the chain represents?
This last point is important because if you configured just one config
entry:
kind = "service-resolver"
name = "web"
redirect {
service = "other"
}
and requested the chain for "web" you'd get back a **default** resolver
for "other". In the xDS code the IsDefault() method is used to
determine if this chain is "empty". If it is then we use the
pre-discovery-chain logic that just uses data embedded in the Upstream
object (and still lets the escape hatches function).
In the example above that means certain parts of the xDS code were going
to try referencing a cluster named "web..." despite the other parts of
the xDS code maintaining clusters named "other...".
Both 'consul config write' and server bootstrap config entries take a
decoding detour through mapstructure on the way from HCL to an actual
struct. They both may take in snake_case or CamelCase (for consistency)
so need very similar handling.
Unfortunately since they are operating on mirror universes of structs
(api.* vs structs.*) the code cannot be identitical, so try to share the
kind-configuration and duplicate the rest for now.
* Ensure we MapWalk the proxy config in the NodeService and ServiceNode structs
This gets rid of some json encoder errors in the catalog endpoints
* Allow passing explicit bind addresses to envoy
* Move map walking to the ConnectProxyConfig struct
Any place where this struct gets JSON encoded will benefit as opposed to having to implement it everywhere.
* Fail when a non-empty address is provided and not bindable
* camel case
* Update command/connect/envoy/envoy.go
Co-Authored-By: Paul Banks <banks@banksco.de>
* Fix some tests that I broke when refactoring the ConfigSnapshot
* Make sure the MeshGateway config is added to all the right api structs
* Fix some more tests
With this you should be able to fetch all of the relevant discovery
chain config entries from the state store in one query and then feed
them into the compiler outside of a transaction.
There are a lot of TODOs scattered through here, but they're mostly
around handling fun edge cases and can be deferred until more of the
plumbing works completely.
* Support for maximum size for Output of checks
This PR allows users to limit the size of output produced by checks at the agent
and check level.
When set at the agent level, it will limit the output for all checks monitored
by the agent.
When set at the check level, it can override the agent max for a specific check but
only if it is lower than the agent max.
Default value is 4k, and input must be at least 1.
If a KVSet is performed but does not update the entry, do not trigger
watches for this key.
This avoids releasing blocking queries for KV values that did not
actually changed.
This allows addresses to be tagged at the service level similar to what we allow for nodes already. The address translation that can be enabled with the `translate_wan_addrs` config was updated to take these new addresses into account as well.
The observed bug was that a full restart of a consul datacenter (servers
and clients) in conjunction with a restart of a connect-flavored
application with bring-your-own-service-registration logic would very
frequently cause the envoy sidecar service check to never reflect the
aliased service.
Over the course of investigation several bugs and unfortunate
interactions were corrected:
(1)
local.CheckState objects were only shallow copied, but the key piece of
data that gets read and updated is one of the things not copied (the
underlying Check with a Status field). When the stock code was run with
the race detector enabled this highly-relevant-to-the-test-scenario field
was found to be racy.
Changes:
a) update the existing Clone method to include the Check field
b) copy-on-write when those fields need to change rather than
incrementally updating them in place.
This made the observed behavior occur slightly less often.
(2)
If anything about how the runLocal method for node-local alias check
logic was ever flawed, there was no fallback option. Those checks are
purely edge-triggered and failure to properly notice a single edge
transition would leave the alias check incorrect until the next flap of
the aliased check.
The change was to introduce a fallback timer to act as a control loop to
double check the alias check matches the aliased check every minute
(borrowing the duration from the non-local alias check logic body).
This made the observed behavior eventually go away when it did occur.
(3)
Originally I thought there were two main actions involved in the data race:
A. The act of adding the original check (from disk recovery) and its
first health evaluation.
B. The act of the HTTP API requests coming in and resetting the local
state when re-registering the same services and checks.
It took awhile for me to realize that there's a third action at work:
C. The goroutines associated with the original check and the later
checks.
The actual sequence of actions that was causing the bad behavior was
that the API actions result in the original check to be removed and
re-added _without waiting for the original goroutine to terminate_. This
means for brief windows of time during check definition edits there are
two goroutines that can be sending updates for the alias check status.
In extremely unlikely scenarios the original goroutine sees the aliased
check start up in `critical` before being removed but does not get the
notification about the nearly immediate update of that check to
`passing`.
This is interlaced wit the new goroutine coming up, initializing its
base case to `passing` from the current state and then listening for new
notifications of edge triggers.
If the original goroutine "finishes" its update, it then commits one
more write into the local state of `critical` and exits leaving the
alias check no longer reflecting the underlying check.
The correction here is to enforce that the old goroutines must terminate
before spawning the new one for alias checks.
* Add integration test for central config; fix central config WIP
* Add integration test for central config; fix central config WIP
* Set proxy protocol correctly and begin adding upstream support
* Add upstreams to service config cache key and start new notify watcher if they change.
This doesn't update the tests to pass though.
* Fix some merging logic get things working manually with a hack (TODO fix properly)
* Simplification to not allow enabling sidecars centrally - it makes no sense without upstreams anyway
* Test compile again and obvious ones pass. Lots of failures locally not debugged yet but may be flakes. Pushing up to see what CI does
* Fix up service manageer and API test failures
* Remove the enable command since it no longer makes much sense without being able to turn on sidecar proxies centrally
* Remove version.go hack - will make integration test fail until release
* Remove unused code from commands and upstream merge
* Re-bump version to 1.5.0
* Add support for HTTP proxy listeners
* Add customizable bootstrap configuration options
* Debug logging for xDS AuthZ
* Add Envoy Integration test suite with basic test coverage
* Add envoy command tests to cover new cases
* Add tracing integration test
* Add gRPC support WIP
* Merged changes from master Docker. get CI integration to work with same Dockerfile now
* Make docker build optional for integration
* Enable integration tests again!
* http2 and grpc integration tests and fixes
* Fix up command config tests
* Store all container logs as artifacts in circle on fail
* Add retries to outer part of stats measurements as we keep missing them in CI
* Only dump logs on failing cases
* Fix typos from code review
* Review tidying and make tests pass again
* Add debug logs to exec test.
* Fix legit test failure caused by upstream rename in envoy config
* Attempt to reduce cases of bad TLS handshake in CI integration tests
* bring up the right service
* Add prometheus integration test
* Add test for denied AuthZ both HTTP and TCP
* Try ANSI term for Circle
Roles are named and can express the same bundle of permissions that can
currently be assigned to a Token (lists of Policies and Service
Identities). The difference with a Role is that it not itself a bearer
token, but just another entity that can be tied to a Token.
This lets an operator potentially curate a set of smaller reusable
Policies and compose them together into reusable Roles, rather than
always exploding that same list of Policies on any Token that needs
similar permissions.
This also refactors the acl replication code to be semi-generic to avoid
3x copypasta.
This is mainly to avoid having the API return "0001-01-01T00:00:00Z" as
a value for the ExpirationTime field when it is not set. Unfortunately
time.Time doesn't respect the json marshalling "omitempty" directive.
These act like a special cased version of a Policy Template for granting
a token the privileges necessary to register a service and its connect
proxy, and read upstreams from the catalog.
Fixes: #4222
# Data Filtering
This PR will implement filtering for the following endpoints:
## Supported HTTP Endpoints
- `/agent/checks`
- `/agent/services`
- `/catalog/nodes`
- `/catalog/service/:service`
- `/catalog/connect/:service`
- `/catalog/node/:node`
- `/health/node/:node`
- `/health/checks/:service`
- `/health/service/:service`
- `/health/connect/:service`
- `/health/state/:state`
- `/internal/ui/nodes`
- `/internal/ui/services`
More can be added going forward and any endpoint which is used to list some data is a good candidate.
## Usage
When using the HTTP API a `filter` query parameter can be used to pass a filter expression to Consul. Filter Expressions take the general form of:
```
<selector> == <value>
<selector> != <value>
<value> in <selector>
<value> not in <selector>
<selector> contains <value>
<selector> not contains <value>
<selector> is empty
<selector> is not empty
not <other expression>
<expression 1> and <expression 2>
<expression 1> or <expression 2>
```
Normal boolean logic and precedence is supported. All of the actual filtering and evaluation logic is coming from the [go-bexpr](https://github.com/hashicorp/go-bexpr) library
## Other changes
Adding the `Internal.ServiceDump` RPC endpoint. This will allow the UI to filter services better.
Fix error in detecting raft replication errors.
Detect redacted token secrets and prevent attempting to insert.
Add a Redacted field to the TokenBatchRead and TokenRead RPC endpoints
This will indicate whether token secrets have been redacted.
Ensure any token with a redacted secret in secondary datacenters is removed.
Test that redacted tokens cannot be replicated.
Adds two new configuration parameters "dns_config.use_cache" and
"dns_config.cache_max_age" controlling how DNS requests use the agent
cache when querying servers.
Given a query like:
```
{
"Name": "tagged-connect-query",
"Service": {
"Service": "foo",
"Tags": ["tag"],
"Connect": true
}
}
```
And a Consul configuration like:
```
{
"services": [
"name": "foo",
"port": 8080,
"connect": { "sidecar_service": {} },
"tags": ["tag"]
]
}
```
If you executed the query it would always turn up with 0 results. This was because the sidecar service was being created without any tags. You could instead make your config look like:
```
{
"services": [
"name": "foo",
"port": 8080,
"connect": { "sidecar_service": {
"tags": ["tag"]
} },
"tags": ["tag"]
]
}
```
However that is a bit redundant for most cases. This PR ensures that the tags and service meta of the parent service get copied to the sidecar service. If there are any tags or service meta set in the sidecar service definition then this copying does not take place. After the changes, the query will now return the expected results.
A second change was made to prepared queries in this PR which is to allow filtering on ServiceMeta just like we allow for filtering on NodeMeta.
* Support rate limiting and concurrency limiting CSR requests on servers; handle CA rotations gracefully with jitter and backoff-on-rate-limit in client
* Add CSR rate limiting docs
* Fix config naming and add tests for new CA configs
* Store leaf cert indexes in raft and use for the ModifyIndex on the returned certs
This ensures that future certificate signings will have a strictly greater ModifyIndex than any previous certs signed.
* Add State storage and LastResult argument into Cache so that cache.Types can safely store additional data that is eventually expired.
* New Leaf cache type working and basic tests passing. TODO: more extensive testing for the Root change jitter across blocking requests, test concurrent fetches for different leaves interact nicely with rootsWatcher.
* Add multi-client and delayed rotation tests.
* Typos and cleanup error handling in roots watch
* Add comment about how the FetchResult can be used and change ca leaf state to use a non-pointer state.
* Plumb test override of root CA jitter through TestAgent so that tests are deterministic again!
* Fix failing config test
* bugfix: use ServiceTags to generate cahce key hash
* update unit test
* update
* remote print log
* Update .gitignore
* Completely deprecate ServiceTag field internally for clarity
* Add explicit test for CacheInfo cases
This endpoint aggregates all checks related to <service id> on the agent
and return an appropriate http code + the string describing the worst
check.
This allows to cleanly expose service status to other component, hiding
complexity of multiple checks.
This is especially useful to use consul to feed a load balancer which
would delegate health checking to consul agent.
Exposing this endpoint on the agent is necessary to avoid a hit on
consul servers and avoid decreasing resiliency (this endpoint will work
even if there is no consul leader in the cluster).
* Add leader token upgrade test and fix various ACL enablement bugs
* Update the leader ACL initialization tests.
* Add a StateStore ACL tests for ACLTokenSet and ACLTokenGetBy* functions
* Advertise the agents acl support status with the agent/self endpoint.
* Make batch token upsert CAS’able to prevent consistency issues with token auto-upgrade
* Finish up the ACL state store token tests
* Finish the ACL state store unit tests
Also rename some things to make them more consistent.
* Do as much ACL replication testing as I can.
This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week.
Description
At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers.
On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though.
Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though.
All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management.
Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are:
A server running the new system must still support other clients using the legacy system.
A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system.
The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode.
So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
* Support multiple tags for health and catalog api endpoints
Fixes#1781.
Adds a `ServiceTags` field to the ServiceSpecificRequest to support
multiple tags, updates the filter logic in the catalog store, and
propagates these change through to the health and catalog endpoints.
Note: Leaves `ServiceTag` in the struct, since it is being used as
part of the DNS lookup, which in turn uses the health check.
* Update the api package to support multiple tags
Includes additional tests.
* Update new tests to use the `require` library
* Update HealthConnect check after a bad merge
* [Performance On Large clusters] Checks do update services/nodes only when really modified to avoid too many updates on very large clusters
In a large cluster, when having a few thousands of nodes, the anti-entropy
mechanism performs lots of changes (several per seconds) while
there is no real change. This patch wants to improve this in order
to increase Consul scalability when using many blocking requests on
health for instance.
* [Performance for large clusters] Only updates index of service if service is really modified
* [Performance for large clusters] Only updates index of nodes if node is really modified
* Added comments / ensure IsSame() has clear semantics
* Avoid having modified boolean, return nil directly if stutures are Same
* Fixed unstable unit tests TestLeader_ChangeServerID
* Rewrite TestNode_IsSame() for better readability as suggested by @banks
* Rename ServiceNode.IsSame() into IsSameService() + added unit tests
* Do not duplicate TestStructs_ServiceNode_Conversions() and increase test coverage of IsSameService
* Clearer documentation in IsSameService
* Take into account ServiceProxy into ServiceNode.IsSameService()
* Fixed IsSameService() with all new structures
* Proxy Config Manager
This component watches for local state changes on the agent and ensures that each service registered locally with Kind == connect-proxy has it's state being actively populated in the cache.
This serves two purposes:
1. For the built-in proxy, it ensures that the state needed to accept connections is available in RAM shortly after registration and likely before the proxy actually starts accepting traffic.
2. For (future - next PR) xDS server and other possible future proxies that require _push_ based config discovery, this provides a mechanism to subscribe and be notified about updates to a proxy instance's config including upstream service discovery results.
* Address review comments
* Better comments; Better delivery of latest snapshot for slow watchers; Embed Config
* Comment typos
* Add upstream Stringer for funsies
Daniel Nephin
R.B. Boyer
Daniel Nephin
Freddy
Kyle Havlovitz
Chris Piraino
freddygv
Matt Keeler
Alejandro Baez
Matt Keeler
Hans Hasselberg
Akshay Ganeshen
Aestek
rerorero
Paul Banks
Paul Banks
Sarah Adams
PHBourquin
Pierre Souchay
hashicorp-ci
Mike Morris
Todd Radel
Jeff Mitchell
R.B. Boyer
Matt Keeler
Aestek
Grégoire Seux
Jack Pearkes
Rebecca Zanzig