### Description
<!-- Please describe why you're making this change, in plain English.
-->
- Currently the jwt-auth filter doesn't take into account the service
identity when validating jwt-auth, it only takes into account the path
and jwt provider during validation. This causes issues when multiple
source intentions restrict access to an endpoint with different JWT
providers.
- To fix these issues, rather than use the JWT auth filter for
validation, we use it in metadata mode and allow it to forward the
successful validated JWT token payload to the RBAC filter which will
make the decisions.
This PR ensures requests with and without JWT tokens successfully go
through the jwt-authn filter. The filter however only forwards the data
for successful/valid tokens. On the RBAC filter level, we check the
payload for claims and token issuer + existing rbac rules.
### Testing & Reproduction steps
<!--
* In the case of bugs, describe how to replicate
* If any manual tests were done, document the steps and the conditions
to replicate
* Call out any important/ relevant unit tests, e2e tests or integration
tests you have added or are adding
-->
- This test covers a multi level jwt requirements (requirements at top
level and permissions level). It also assumes you have envoy running,
you have a redis and a sidecar proxy service registered, and have a way
to generate jwks with jwt. I mostly use:
https://www.scottbrady91.com/tools/jwt for this.
- first write your proxy defaults
```
Kind = "proxy-defaults"
name = "global"
config {
protocol = "http"
}
```
- Create two providers
```
Kind = "jwt-provider"
Name = "auth0"
Issuer = "https://ronald.local"
JSONWebKeySet = {
Local = {
JWKS = "eyJrZXlzIjog....."
}
}
```
```
Kind = "jwt-provider"
Name = "okta"
Issuer = "https://ronald.local"
JSONWebKeySet = {
Local = {
JWKS = "eyJrZXlzIjogW3...."
}
}
```
- add a service intention
```
Kind = "service-intentions"
Name = "redis"
JWT = {
Providers = [
{
Name = "okta"
},
]
}
Sources = [
{
Name = "*"
Permissions = [{
Action = "allow"
HTTP = {
PathPrefix = "/workspace"
}
JWT = {
Providers = [
{
Name = "okta"
VerifyClaims = [
{
Path = ["aud"]
Value = "my_client_app"
},
{
Path = ["sub"]
Value = "5be86359073c434bad2da3932222dabe"
}
]
},
]
}
},
{
Action = "allow"
HTTP = {
PathPrefix = "/"
}
JWT = {
Providers = [
{
Name = "auth0"
},
]
}
}]
}
]
```
- generate 3 jwt tokens: 1 from auth0 jwks, 1 from okta jwks with
different claims than `/workspace` expects and 1 with correct claims
- connect to your envoy (change service and address as needed) to view
logs and potential errors. You can add: `-- --log-level debug` to see
what data is being forwarded
```
consul connect envoy -sidecar-for redis1 -grpc-addr 127.0.0.1:8502
```
- Make the following requests:
```
curl -s -H "Authorization: Bearer $Auth0_TOKEN" --insecure --cert leaf.cert --key leaf.key --cacert connect-ca.pem https://localhost:20000/workspace -v
RBAC filter denied
curl -s -H "Authorization: Bearer $Okta_TOKEN_with_wrong_claims" --insecure --cert leaf.cert --key leaf.key --cacert connect-ca.pem https://localhost:20000/workspace -v
RBAC filter denied
curl -s -H "Authorization: Bearer $Okta_TOKEN_with_correct_claims" --insecure --cert leaf.cert --key leaf.key --cacert connect-ca.pem https://localhost:20000/workspace -v
Successful request
```
### TODO
* [x] Update test coverage
* [ ] update integration tests (follow-up PR)
* [x] appropriate backport labels added
### Description
<!-- Please describe why you're making this change, in plain English.
-->
The mock is used in `http_ent_test` file which caused lint failures. For
OSS->ENT parity adding the same change here.
### Links
<!--
Include any links here that might be helpful for people reviewing your
PR (Tickets, GH issues, API docs, external benchmarks, tools docs, etc).
If there are none, feel free to delete this section.
Please be mindful not to leak any customer or confidential information.
HashiCorp employees may want to use our internal URL shortener to
obfuscate links.
-->
Identified in OSS->ENT [merge
PR](https://github.com/hashicorp/consul-enterprise/pull/6328)
### PR Checklist
* [ ] ~updated test coverage~
* [ ] ~external facing docs updated~
* [x] appropriate backport labels added
* [ ] ~not a security concern~
### Description
This is to correct a code problem because this assumes all segments, but
when you get to Enterprise, you can be in partition that is not the
default partition, in which case specifying all segments does not
validate and fails. This is to correct the setting of this filter with
`AllSegments` to `true` to only occur when in the the `default`
partition.
### Testing & Reproduction steps
<!--
* In the case of bugs, describe how to replicate
* If any manual tests were done, document the steps and the conditions
to replicate
* Call out any important/ relevant unit tests, e2e tests or integration
tests you have added or are adding
-->
### Links
<!--
Include any links here that might be helpful for people reviewing your
PR (Tickets, GH issues, API docs, external benchmarks, tools docs, etc).
If there are none, feel free to delete this section.
Please be mindful not to leak any customer or confidential information.
HashiCorp employees may want to use our internal URL shortener to
obfuscate links.
-->
### PR Checklist
* [ ] updated test coverage
* [ ] external facing docs updated
* [ ] appropriate backport labels added
* [ ] not a security concern
Updating RootPKIPath but not IntermediatePKIPath would not update
leaf signing certs with the new root. Unsure if this happens in practice
but manual testing showed it is a bug that would break mesh and agent
connections once the old root is pruned.
### Description
<!-- Please describe why you're making this change, in plain English.
-->
Dan had already started on this
[task](https://github.com/hashicorp/consul/pull/17849) which is needed
to start building the HTTP APIs. This just needed some cleanup to get it
ready for review.
Overview:
- Rename `internalResourceServiceClient` to
`insecureResourceServiceClient` for name consistency
- Configure a `secureResourceServiceClient` with auth enabled
### PR Checklist
* [ ] ~updated test coverage~
* [ ] ~external facing docs updated~
* [x] appropriate backport labels added
* [ ] ~not a security concern~
* update UINodes and UINodeInfo response with consul-version info added as NodeMeta, fetched from serf members
* update test cases TestUINodes, TestUINodeInfo
* added nil check for map
* add consul-version in local agent node metadata
* get consul version from serf member and add this as node meta in catalog register request
* updated ui mock response to include consul versions as node meta
* updated ui trans and added version as query param to node list route
* updates in ui templates to display consul version with filter and sorts
* updates in ui - model class, serializers,comparators,predicates for consul version feature
* added change log for Consul Version Feature
* updated to get version from consul service, if for some reason not available from serf
* updated changelog text
* updated dependent testcases
* multiselection version filter
* Update agent/consul/state/catalog.go
comments updated
Co-authored-by: Jared Kirschner <85913323+jkirschner-hashicorp@users.noreply.github.com>
---------
Co-authored-by: Jared Kirschner <85913323+jkirschner-hashicorp@users.noreply.github.com>
This PR fixes a bug that was introduced in:
https://github.com/hashicorp/consul/pull/16021
A user setting a protocol in proxy-defaults would cause tproxy implicit
upstreams to not honor the upstream service's protocol set in its
`ServiceDefaults.Protocol` field, and would instead always use the
proxy-defaults value.
Due to the fact that upstreams configured with "tcp" can successfully contact
upstream "http" services, this issue was not recognized until recently (a
proxy-defaults with "tcp" and a listening service with "http" would make
successful requests, but not the opposite).
As a temporary work-around, users experiencing this issue can explicitly set
the protocol on the `ServiceDefaults.UpstreamConfig.Overrides`, which should
take precedence.
The fix in this PR removes the proxy-defaults protocol from the wildcard
upstream that tproxy uses to configure implicit upstreams. When the protocol
was included, it would always overwrite the value during discovery chain
compilation, which was not correct. The discovery chain compiler also consumes
proxy defaults to determine the protocol, so simply excluding it from the
wildcard upstream config map resolves the issue.
* # This is a combination of 9 commits.
# This is the 1st commit message:
init without tests
# This is the commit message #2:
change log
# This is the commit message #3:
fix tests
# This is the commit message #4:
fix tests
# This is the commit message #5:
added tests
# This is the commit message #6:
change log breaking change
# This is the commit message #7:
removed breaking change
# This is the commit message #8:
fix test
# This is the commit message #9:
keeping the test behaviour same
* # This is a combination of 12 commits.
# This is the 1st commit message:
init without tests
# This is the commit message #2:
change log
# This is the commit message #3:
fix tests
# This is the commit message #4:
fix tests
# This is the commit message #5:
added tests
# This is the commit message #6:
change log breaking change
# This is the commit message #7:
removed breaking change
# This is the commit message #8:
fix test
# This is the commit message #9:
keeping the test behaviour same
# This is the commit message #10:
made enable debug atomic bool
# This is the commit message #11:
fix lint
# This is the commit message #12:
fix test true enable debug
* parent 10f500e895d92cc3691ade7b74a33db755d22039
author absolutelightning <ashesh.vidyut@hashicorp.com> 1687352587 +0530
committer absolutelightning <ashesh.vidyut@hashicorp.com> 1687352592 +0530
init without tests
change log
fix tests
fix tests
added tests
change log breaking change
removed breaking change
fix test
keeping the test behaviour same
made enable debug atomic bool
fix lint
fix test true enable debug
using enable debug in agent as atomic bool
test fixes
fix tests
fix tests
added update on correct locaiton
fix tests
fix reloadable config enable debug
fix tests
fix init and acl 403
* revert commit
* Ensure RSA keys are at least 2048 bits in length
* Add changelog
* update key length check for FIPS compliance
* Fix no new variables error and failing to return when error exists from
validating
* clean up code for better readability
* actually return value
* Fix a bug that wrongly trims domains when there is an overlap with DC name
Before this change, when DC name and domain/alt-domain overlap, the domain name incorrectly trimmed from the query.
Example:
Given: datacenter = dc-test, alt-domain = test.consul.
Querying for "test-node.node.dc-test.consul" will faile, because the
code was trimming "test.consul" instead of just ".consul"
This change, fixes the issue by adding dot (.) before trimming
* trimDomain: ensure domain trimmed without modyfing original domains
* update changelog
---------
Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
For consistency, resource type names must follow these rules:
- `Group` must be snake case, and in most cases a single word.
- `GroupVersion` must be lowercase, start with a "v" and end with a number.
- `Kind` must be pascal case.
These were chosen because they map to our protobuf type naming
conventions.
Update CA provider docs
Clarify that providers can differ between
primary and secondary datacenters
Provide a comparison chart for consul vs
vault CA providers
Loosen Vault CA provider validation for RootPKIPath
Update Vault CA provider documentation
* Reject inbound Prop Override patch with Services
Services filtering is only supported for outbound TrafficDirection patches.
* Improve Prop Override unexpected type validation
- Guard against additional invalid parent and target types
- Add specific error handling for Any fields (unsupported)
Fix issue with streaming service health watches.
This commit fixes an issue where the health streams were unaware of service
export changes. Whenever an exported-services config entry is modified, it is
effectively an ACL change.
The bug would be triggered by the following situation:
- no services are exported
- an upstream watch to service X is spawned
- the streaming backend filters out data for service X (due to lack of exports)
- service X is finally exported
In the situation above, the streaming backend does not trigger a refresh of its
data. This means that any events that were supposed to have been received prior
to the export are NOT backfilled, and the watches never see service X spawning.
We currently have decided to not trigger a stream refresh in this situation due
to the potential for a thundering herd effect (touching exports would cause a
re-fetch of all watches for that partition, potentially). Therefore, a local
blocking-query approach was added by this commit for agentless.
It's also worth noting that the streaming subscription is currently bypassed
most of the time with agentful, because proxycfg has a `req.Source.Node != ""`
which prevents the `streamingEnabled` check from passing. This means that while
agents should technically have this same issue, they don't experience it with
mesh health watches.
Note that this is a temporary fix that solves the issue for proxycfg, but not
service-discovery use cases.
* agent: remove agent cache dependency from service mesh leaf certificate management
This extracts the leaf cert management from within the agent cache.
This code was produced by the following process:
1. All tests in agent/cache, agent/cache-types, agent/auto-config,
agent/consul/servercert were run at each stage.
- The tests in agent matching .*Leaf were run at each stage.
- The tests in agent/leafcert were run at each stage after they
existed.
2. The former leaf cert Fetch implementation was extracted into a new
package behind a "fake RPC" endpoint to make it look almost like all
other cache type internals.
3. The old cache type was shimmed to use the fake RPC endpoint and
generally cleaned up.
4. I selectively duplicated all of Get/Notify/NotifyCallback/Prepopulate
from the agent/cache.Cache implementation over into the new package.
This was renamed as leafcert.Manager.
- Code that was irrelevant to the leaf cert type was deleted
(inlining blocking=true, refresh=false)
5. Everything that used the leaf cert cache type (including proxycfg
stuff) was shifted to use the leafcert.Manager instead.
6. agent/cache-types tests were moved and gently replumbed to execute
as-is against a leafcert.Manager.
7. Inspired by some of the locking changes from derek's branch I split
the fat lock into N+1 locks.
8. The waiter chan struct{} was eventually replaced with a
singleflight.Group around cache updates, which was likely the biggest
net structural change.
9. The awkward two layers or logic produced as a byproduct of marrying
the agent cache management code with the leaf cert type code was
slowly coalesced and flattened to remove confusion.
10. The .*Leaf tests from the agent package were copied and made to work
directly against a leafcert.Manager to increase direct coverage.
I have done a best effort attempt to port the previous leaf-cert cache
type's tests over in spirit, as well as to take the e2e-ish tests in the
agent package with Leaf in the test name and copy those into the
agent/leafcert package to get more direct coverage, rather than coverage
tangled up in the agent logic.
There is no net-new test coverage, just coverage that was pushed around
from elsewhere.
This includes prioritize by localities on disco chain targets rather than
resolvers, allowing different targets within the same partition to have
different policies.
* Add header filter to api-gateway xDS golden test
* Stop adding all header filters to virtual host when generating xDS for api-gateway
* Regenerate xDS golden file for api-gateway w/ header filter
Dan Stough
Ronald
Poonam Jadhav
wangxinyi7
John Murret
Chris S. Kim
Vijay
Tom Davies
Fulvio
Derek Menteer
Chris Thain
Ashesh Vidyut
Ranjandas
John Maguire
Alex Simenduev
Dan Upton
cskh
George Bolo
Eric Haberkorn
Paul Glass
chappie
Michael Zalimeni
R.B. Boyer
Nathan Coleman
Matt Keeler
Andrew Stucki