* Changed Guides to Learn in the top nav and added utm parameters to the guide index page
* Update website/source/docs/guides/index.html.md
* Update website/source/docs/guides/index.html.md
* Update website/source/layouts/layout.erb
A check may be set to become passing/critical only if a specified number of successive
checks return passing/critical in a row. Status will stay identical as before until
the threshold is reached.
This feature is available for HTTP, TCP, gRPC, Docker & Monitor checks.
Fixes#2742
Previously the docs didn't clarify that if a server restarts as a client then force-leave won't lead to removing the node from the raft config. This is because the node, which is alive after a restart, will refute messages about it having left . These messages about members leaving are in turn what trigger Consul's leader to remove a server from raft.
Fixes: #5396
This PR adds a proxy configuration stanza called expose. These flags register
listeners in Connect sidecar proxies to allow requests to specific HTTP paths from outside of the node. This allows services to protect themselves by only
listening on the loopback interface, while still accepting traffic from non
Connect-enabled services.
Under expose there is a boolean checks flag that would automatically expose all
registered HTTP and gRPC check paths.
This stanza also accepts a paths list to expose individual paths. The primary
use case for this functionality would be to expose paths for third parties like
Prometheus or the kubelet.
Listeners for requests to exposed paths are be configured dynamically at run
time. Any time a proxy, or check can be registered, a listener can also be
created.
In this initial implementation requests to these paths are not
authenticated/encrypted.
The fields in the certs are meant to hold the original binary
representation of this data, not some ascii-encoded version.
The only time we should be colon-hex-encoding fields is for display
purposes or marshaling through non-TLS mediums (like RPC).
- fix instructions for CoreDNS (it updated)
- fix instructions for new component names
- recommend installing with the name 'consul'
- add disclaimer that catalog sync is not always required
- clean up example values.yaml files
- Bootstrap escape hatches are OK.
- Public listener/cluster escape hatches are OK.
- Upstream listener/cluster escape hatches are not supported.
If an unsupported escape hatch is configured and the discovery chain is
activated log a warning and act like it was not configured.
Fixes#6160
Add parameter local-only to operator keyring list requests to force queries to only hit local servers (no WAN traffic).
HTTP API: GET /operator/keyring?local-only=true
CLI: consul keyring -list --local-only
Sending the local-only flag with any non-GET/list request will result in an error.
The main change is that we no longer filter service instances by health,
preferring instead to render all results down into EDS endpoints in
envoy and merely label the endpoints as HEALTHY or UNHEALTHY.
When OnlyPassing is set to true we will force consul checks in a
'warning' state to render as UNHEALTHY in envoy.
Fixes#6171
This fixes pathological cases where the write throughput and snapshot size are both so large that more than 10k log entries are written in the time it takes to restore the snapshot from disk. In this case followers that restart can never catch up with leader replication again and enter a loop of constantly downloading a full snapshot and restoring it only to find that snapshot is already out of date and the leader has truncated its logs so a new snapshot is sent etc.
In general if you need to adjust this, you are probably abusing Consul for purposes outside its design envelope and should reconsider your usage to reduce data size and/or write volume.
* Bad link in encryption docs
* clarifying the guide link
* Update website/source/docs/agent/encryption.html.md
Co-Authored-By: kaitlincarter-hc <43049322+kaitlincarter-hc@users.noreply.github.com>
* Update website/source/docs/agent/encryption.html.md
Co-Authored-By: kaitlincarter-hc <43049322+kaitlincarter-hc@users.noreply.github.com>
* add connect gateway guide
* Remove stray space
Co-Authored-By: Freddy <freddygv@users.noreply.github.com>
* Specify stanza and exact options
Co-Authored-By: Freddy <freddygv@users.noreply.github.com>
* incorporate comments from freddy
* integrate feedback from matt
* make snippets all json
* incorporate more comments from matt
* added links
* incorporate comments from neena on google doc draft
* make learn lnks relative
* clarify that gateways are new
* change socat to netcat
* add more description about replication token permissions
* Apply suggestions from code review
Co-Authored-By: Matt Keeler <mkeeler@users.noreply.github.com>
* add the prerequisite to enable centralized service config
* finish adding docs links
* website: link to 1.6.0 beta in downloads page
* website: reorganize intention replication/ca federation
* website: remove announcement bar
* Update website/source/docs/connect/connect-internals.html.md
Co-Authored-By: Paul Banks <banks@banksco.de>
* website: update homepage and service mesh page
Aligning messaging to current product.
* website: fix link TODOs
* Add Mesh Gateway to mesh page, update use case wording
* connect: allow overriding envoy listener bind_address
* Update agent/xds/config.go
Co-Authored-By: Kyle Havlovitz <kylehav@gmail.com>
* connect: allow overriding envoy listener bind_port
* envoy: support unix sockets for grpc in bootstrap
Add AgentSocket BootstrapTplArgs which if set overrides the AgentAddress
and AgentPort to generate a bootstrap which points Envoy to a unix
socket file instead of an ip:port.
* Add a test for passing the consul addr as a unix socket
* Fix config formatting for envoy bootstrap tests
* Fix listeners test cases for bind addr/port
* Update website/source/docs/connect/proxies/envoy.md
* Add ui-content-path flag
* tests complete, regex validator on string, index.html updated
* cleaning up debugging stuff
* ui: Enable ember environment configuration to be set via the go binary at runtime (#5934)
* ui: Only inject {{.ContentPath}} if we are makeing a prod build...
...otherwise we just use the current rootURL
This gets injected into a <base /> node which solves the assets path
problem but not the ember problem
* ui: Pull out the <base href=""> value and inject it into ember env
See previous commit:
The <base href=""> value is 'sometimes' injected from go at index
serve time. We pass this value down to ember by overwriting the ember
config that is injected via a <meta> tag. This has to be done before
ember bootup.
Sometimes (during testing and development, basically not production)
this is injected with the already existing value, in which case this
essentially changes nothing.
The code here is slightly abstracted away from our specific usage to
make it easier for anyone else to use, and also make sure we can cope
with using this same method to pass variables down from the CLI through
to ember in the future.
* ui: We can't use <base /> move everything to javascript (#5941)
Unfortuantely we can't seem to be able to use <base> and rootURL
together as URL paths will get doubled up (`ui/ui/`).
This moves all the things that we need to interpolate with .ContentPath
to the `startup` javascript so we can conditionally print out
`{{.ContentPath}}` in lots of places (now we can't use base)
* fixed when we serve index.html
* ui: For writing a ContentPath, we also need to cope with testing... (#5945)
...and potentially more environments
Testing has more additional things in a separate index.html in `tests/`
This make the entire thing a little saner and uses just javascriopt
template literals instead of a pseudo handbrake synatx for our
templating of these files.
Intead of just templating the entire file this way, we still only
template `{{content-for 'head'}}` and `{{content-for 'body'}}`
in this way to ensure we support other plugins/addons
* build: Loosen up the regex for retrieving the CONSUL_VERSION (#5946)
* build: Loosen up the regex for retrieving the CONSUL_VERSION
1. Previously the `sed` replacement was searching for the CONSUL_VERSION
comment at the start of a line, it no longer does this to allow for
indentation.
2. Both `grep` and `sed` where looking for the omment at the end of the
line. We've removed this restriction here. We don't need to remove it
right now, but if we ever put the comment followed by something here the
searching would break.
3. Added `xargs` for trimming the resulting version string. We aren't
using this already in the rest of the scripts, but we are pretty sure
this is available on most systems.
* ui: Fix erroneous variable, and also force an ember cache clean on build
1. We referenced a variable incorrectly here, this fixes that.
2. We also made sure that every `make` target clears ember's `tmp` cache
to ensure that its not using any caches that have since been edited
everytime we call a `make` target.
* added docs, fixed encoding
* fixed go fmt
* Update agent/config/config.go
Co-Authored-By: R.B. Boyer <public@richardboyer.net>
* Completed Suggestions
* run gofmt on http.go
* fix testsanitize
* fix fullconfig/hcl by setting correct 'want'
* ran gofmt on agent/config/runtime_test.go
* Update website/source/docs/agent/options.html.md
Co-Authored-By: Hans Hasselberg <me@hans.io>
* Update website/source/docs/agent/options.html.md
Co-Authored-By: kaitlincarter-hc <43049322+kaitlincarter-hc@users.noreply.github.com>
* remove contentpath from redirectFS struct
* Support for maximum size for Output of checks
This PR allows users to limit the size of output produced by checks at the agent
and check level.
When set at the agent level, it will limit the output for all checks monitored
by the agent.
When set at the check level, it can override the agent max for a specific check but
only if it is lower than the agent max.
Default value is 4k, and input must be at least 1.
* Moved the glossary to a new page and removed the advanced warnings from all internals docs.
* Update website/source/layouts/docs.erb
Co-Authored-By: Judith Malnick <judith@hashicorp.com>
* Updates based on PR feedback
* Update website/source/docs/internals/index.html.md
* Update website/source/docs/internals/index.html.md
* Update website/source/docs/internals/index.html.md
* Update website/source/docs/internals/index.html.md
* Update website/source/docs/internals/index.html.md
* Upating the term node to be more clear
* Update website/source/docs/internals/architecture.html.md
* Update website/source/docs/internals/architecture.html.md
Co-Authored-By: Paul Banks <banks@banksco.de>
* Addressing the failure detection comment
This allows addresses to be tagged at the service level similar to what we allow for nodes already. The address translation that can be enabled with the `translate_wan_addrs` config was updated to take these new addresses into account as well.
* clarify possibilities for centralized proxy configuration
* add line breaks to config entries file
* add info about centralized config to built in proxy doc
* mondify connect landing page to help with navigation
* move internals details to its own page
* link fixes and shortening text on main page
* put built-in proxy options on its own page
* add configuration details for connect
* clarify security title and add observability page
* reorganize menu
* remove observability from configuration section
* Update website/source/docs/connect/configuration.html.md
Co-Authored-By: Paul Banks <banks@banksco.de>
* Update website/source/docs/connect/index.html.md
Co-Authored-By: Paul Banks <banks@banksco.de>
* Update website/source/docs/agent/config_entries.html.md
Co-Authored-By: Paul Banks <banks@banksco.de>
* Update website/source/docs/connect/configuration.html.md
Co-Authored-By: Paul Banks <banks@banksco.de>
* rename connect section to include service mesh
* reorganize sections per suggestions from paul
* add configuration edits from paul
* add internals edits from paul
* add observability edits from paul
* reorganize pages and menu
* Update website/source/docs/connect/configuration.html.md
Co-Authored-By: Paul Banks <banks@banksco.de>
* menu corrections and edits
* incorporate some of pauls comments
* incorporate more of pauls comments
* Update website/source/docs/connect/configuration.html.md
Co-Authored-By: kaitlincarter-hc <43049322+kaitlincarter-hc@users.noreply.github.com>
* Update website/source/docs/connect/index.html.md
Co-Authored-By: kaitlincarter-hc <43049322+kaitlincarter-hc@users.noreply.github.com>
* Update website/source/docs/connect/index.html.md
Co-Authored-By: kaitlincarter-hc <43049322+kaitlincarter-hc@users.noreply.github.com>
* Update website/source/docs/connect/registration.html.md
Co-Authored-By: kaitlincarter-hc <43049322+kaitlincarter-hc@users.noreply.github.com>
* incorporate kaitlin and pavanni feedback
* add redirect
* fix conflicts in index file
* Resolve conflicts in index file
* correct links for new organization
* Update website/source/docs/connect/proxies.html.md
Co-Authored-By: Paul Banks <banks@banksco.de>
* Update website/source/docs/connect/registration.html.md
Co-Authored-By: Paul Banks <banks@banksco.de>
* Update website/source/docs/connect/registration.html.md
Co-Authored-By: Paul Banks <banks@banksco.de>
* Update website/source/docs/connect/registration.html.md
Co-Authored-By: Paul Banks <banks@banksco.de>
* add title to service registration page
* Upgrade xDS (go-control-plane) API to support Envoy 1.10.
This includes backwards compatibility shim to work around the ext_authz package rename in 1.10.
It also adds integration test support in CI for 1.10.0.
* Fix go vet complaints
* go mod vendor
* Update Envoy version info in docs
* Update website/source/docs/connect/proxies/envoy.md
The policy in the time-of-day Sentinel example incorrectly references
the top-level time.hour constant. This is actually the same as the
time.Hour Go value, so in other words, 3600000000000 (the int64 value
representing the time in nanoseconds).
This is corrected by just using time.now.hour instead.
Reference: https://github.com/hashicorp/consul/issues/4090
Examples covering a variety of potential use cases. Verified via `sockaddr eval` and `console agent -bind` on a test machine:
```console
# Baseline
$ sockaddr eval 'GetAllInterfaces'
[127.0.0.1/8 {1 65536 lo up|loopback} ::1 {1 65536 lo up|loopback} 10.0.0.10/8 {2 1500 eth0 b8:27:eb:7b:36:95 up|broadcast|multicast} fe80::12dc:5e4d:8ff8:2d96/64 {2 1500 eth0 b8:27:eb:7b:36:95 up|broadcast|multicast} 192.168.1.10/24 {3 1500 wlan0 b8:27:eb:2e:63:c0 up|broadcast|multicast} fe80::b6dc:5758:c306:b15b/64 {3 1500 wlan0 b8:27:eb:2e:63:c0 up|broadcast|multicast}]
# Using address within a specific CIDR
$ sockaddr eval 'GetPrivateInterfaces | include "network" "10.0.0.0/8" | attr "address"'
10.0.0.10
# Using a static network interface name
$ sockaddr eval 'GetInterfaceIP "eth0"'
10.0.0.10
# Using regular expression matching for network interface name that is forwardable and up
$ sockaddr eval 'GetAllInterfaces | include "name" "^eth" | include "flags" "forwardable|up" | attr "address"'
10.0.0.10
```
https://github.com/hashicorp/consul/issues/2121https://www.freedesktop.org/software/systemd/man/systemd.service.html
When set to notify, systemd will not attempt to start any dependent
services until after consul sends the notify signal. This is useful
in cases where there services that rely on the local consul agent
to be up and functional before they can start. The default is simple,
which will immediately mark the service as up and functioning even
if consul has not yet joined the cluster and has started listening
for connnections.
* Updating docs landing page since all the guides have moved
* fixing line wrap
* Giving the docs landing page content with CTAs
* Updated the language for the config and learn boxes
* fixing spacing
* WIP
* Document all the new Envoy L7 configs
* Apply suggestions from code review
Co-Authored-By: banks <banks@banksco.de>
* Rewrite dynamic config and add in TODO links
* Add some config entry docs
* Update website/source/docs/agent/config_entries.html.md
Co-Authored-By: mkeeler <mkeeler@users.noreply.github.com>
* Update website/source/docs/agent/config_entries.html.md
Co-Authored-By: mkeeler <mkeeler@users.noreply.github.com>
* Get rid of double negative
* Some incremental updates
* Update the config list docs to not point to service-default related things.
* A few more doc updates to get rid of some service-defaults specific linking info in the cli docs
* In progress update
* Update website/source/docs/agent/config_entries.html.md
Co-Authored-By: mkeeler <mkeeler@users.noreply.github.com>
* Reword bootstrap section
* Update example proxy-defaults config
* Finish up the examples section for managing config entries with the CLI
* Update website/source/docs/agent/config_entries.html.md
Co-Authored-By: mkeeler <mkeeler@users.noreply.github.com>
* Use $ for shell command start
* Make it very clear that the normal way to manage things is via the API/CLI
* Update website/source/docs/agent/options.html.md
Co-Authored-By: mkeeler <mkeeler@users.noreply.github.com>
* New guide listing common error messages and what to do about them
* Pasted in updates from StackPad edit
* Update website/source/docs/guides/common-errors.md
Co-Authored-By: tradel <todd@radel.us>
* Update website/source/docs/guides/common-errors.md
Co-Authored-By: tradel <todd@radel.us>
* Update website/source/docs/guides/common-errors.md
Co-Authored-By: tradel <todd@radel.us>
* add subheadings in config file errors, move doc out of guides
* modify guide index to point to learn
* adding to the redirects is a wip, updated the side navigation.
* add tracks to list
* Fixing redirects
* Update website/source/docs/guides/index.html.md
Co-Authored-By: judithpatudith <judith@hashicorp.com>
* Update website/source/docs/guides/index.html.md
Co-Authored-By: judithpatudith <judith@hashicorp.com>
* Update website/source/docs/guides/index.html.md
Co-Authored-By: judithpatudith <judith@hashicorp.com>
* Update website/source/docs/guides/index.html.md
Co-Authored-By: judithpatudith <judith@hashicorp.com>
* finish out track listings
* finishing redirects.
* change advanced language to production, add relationship of guides and docs
* Update website/source/redirects.txt
Co-Authored-By: judithpatudith <judith@hashicorp.com>
Luke Kysow
kaitlincarter-hc
Charlie Voiselle
Sarah Christoff
kaitlincarter-hc
PHBourquin
Freddy
Mike Morris
Judith Malnick
R.B. Boyer
Iryna Shustava
Blake Covarrubias
Hans Hasselberg
Jud White
dcallao
Anudeep Reddy
danielehc
Alvin Huang
Ján Dzurek
hashicorp-ci
Matt Keeler
tryan225
Sarah Adams
Jake Lundberg
Omer Zach
Venkata Krishna Annam
freddygv
Alvin Huang
Todd Radel
Paul Banks
javicrespo
Jack Pearkes
Michael Schurter
Akshay Ganeshen
Pierre Souchay
Justin Weissig
Sarah Christoff
Andrei Burd
Judith Malnick
Yoan Blanc
Joel Kuzmarski
Chris Marchesi
Nitish Alluri
Rebecca Zanzig
Christoph Puhl
Brian Flad
Nathan Johnson
Aidan Daniels-Soles
Chip Vaughn
Tyler Ryan