* migrate expose checks and paths tests to resources_test.go
* fix failing expose paths tests
* fix the way endpoint resources get created to make expose tests pass.
* remove endpoint resources that are already inlined on local_app clusters
* renaiming and comments
* migrate remaining service mesh tests to resources_test.go
* cleanup
* update proxystateconverter to skip ading alpn to clusters and listener filterto match v1 behavior
* migrate expose checks and paths tests to resources_test.go
* fix failing expose paths tests
* fix the way endpoint resources get created to make expose tests pass.
* wip
* remove endpoint resources that are already inlined on local_app clusters
* renaiming and comments
* cover all protocols in local_app golden tests
* fix xds tests
* updating latest
* fix broken test
* add sorting of routers to TestBuildLocalApp to get rid of the flaking
* cover all protocols in local_app golden tests
* cover all protocols in local_app golden tests
* cover all protocols in local_app golden tests
* process envoy resource by walking the map. use a map rather than array for envoy resource to prevent duplication.
* cleanup. doc strings.
* update to latest
* fix broken test
* update tests after adding sorting of routers in local_app builder tests
* do not make endpoints for local_app
* fix catalog destinations only by creating clusters for any cluster not already created by walking the graph.
* Configure TestAllResourcesFromSnapshot to run V2 tests
* wip
* fix processing of failover groups
* add endpoints and clusters for any clusters that were not created from walking the listener -> path
* fix xds v2 golden files for clusters to include failover group clusters
* cover all protocols in local_app golden tests
* fix xds tests
* updating latest
* fix broken test
* add sorting of routers to TestBuildLocalApp to get rid of the flaking
* xds: Ensure v2 route match is populated for gRPC
Similar to HTTP, ensure that route match config (which is required by
Envoy) is populated when default values are used.
Because the default matches generated for gRPC contain a single empty
`GRPCRouteMatch`, and that proto does not directly support prefix-based
config, an interpretation of the empty struct is needed to generate the
same output that the `HTTPRouteMatch` is explicitly configured to
provide in internal/mesh/internal/controllers/routes/generate.go.
* xds: Ensure protocol set for gRPC resources
Add explicit protocol in `ProxyStateTemplate` builders and validate it
is always set on clusters. This ensures that HTTP filters and
`http2_protocol_options` are populated in all the necessary places for
gRPC traffic and prevents future unintended omissions of non-TCP
protocols.
Co-authored-by: John Murret <john.murret@hashicorp.com>
---------
Co-authored-by: John Murret <john.murret@hashicorp.com>
* NET-5397 - wire up golden tests from sidecar-proxy controller for xds controller and xdsv2
* WIP
* WIP
* everything matching except leafCerts. need to mock those
* single port destinations working except mixed destinations
* golden test input to xds controller tests for destinations
* proposed fix for failover group naming errors
* clean up test to use helper.
* clean up test to use helper.
* fix test file
* add docstring for test function.
* add docstring for test function.
* fix linting error
* fixing test after route fix merged into main
* first source test works
* WIP
* modify all source files
* source tests pass
* fixing tests after bug fix in main
* got first destination working.
* adding destinations
* fix docstring for test
* fixing tests after bug fix in main
* adding source proxies
* fixing tests after bug fix in main
* got first destination working.
* adding destinations
* fix docstring for test
* fixing tests after bug fix in main
* got first destination working.
* adding destinations
* fix docstring for test
* fixing tests after bug fix in main
* NET-5397 - wire up golden tests from sidecar-proxy controller for xds controller and xdsv2
* WIP
* WIP
* everything matching except leafCerts. need to mock those
* single port destinations working except mixed destinations
* golden test input to xds controller tests for destinations
* proposed fix for failover group naming errors
* clean up test to use helper.
* clean up test to use helper.
* fix test file
* add docstring for test function.
* add docstring for test function.
* fix linting error
* fixing test after route fix merged into main
* first source test works
* WIP
* modify all source files
* source tests pass
* fixing tests after bug fix in main
* got first destination working.
* adding destinations
* fix docstring for test
* fixing tests after bug fix in main
* xdsv2: support l7 by adding xfcc policy/headers, tweaking routes, and make a bunch of listeners l7 tests pass
* sidecarproxycontroller: add l7 local app support
* trafficpermissions: make l4 traffic permissions work on l7 workloads
* rename route name field for consistency with l4 cluster name field
* resolve conflicts and rebase
* fix: ensure route name is used in l7 destination route name as well. previously it was only in the route names themselves, now the route name and l7 destination route name line up
Fix issues with empty sources
* Validate that each permission on traffic permissions resources has at least one source.
* Don't construct RBAC policies when there aren't any principals. This resulted in Envoy rejecting xDS updates with a validation error.
```
error=
| rpc error: code = Internal desc = Error adding/updating listener(s) public_listener: Proto constraint validation failed (RBACValidationError.Rules: embedded message failed validation | caused by RBACValidationError.Policies[consul-intentions-layer4-1]: embedded message failed validation | caused by PolicyValidationError.Principals: value must contain at least 1 item(s)): rules {
```
Ensure that configuring a FailoverPolicy for a service that is reachable via a xRoute or a direct upstream causes an envoy aggregate cluster to be created for the original cluster name, but with separate clusters for each one of the possible destinations.
Adding coauthors who mobbed/paired at various points throughout last week.
Co-authored-by: Dan Stough <dan.stough@hashicorp.com>
Co-authored-by: Iryna Shustava <iryna@hashicorp.com>
Co-authored-by: John Murret <john.murret@hashicorp.com>
Co-authored-by: Michael Zalimeni <michael.zalimeni@hashicorp.com>
Co-authored-by: Ashwin Venkatesh <ashwin@hashicorp.com>
Co-authored-by: Michael Wilkerson <mwilkerson@hashicorp.com>
Configure Envoy to use the same HTTP protocol version used by the
downstream caller when forwarding requests to a local application that
is configured with the protocol set to either `http2` or `grpc`.
This allows upstream applications that support both HTTP/1.1 and
HTTP/2 on a single port to receive requests using either protocol. This
is beneficial when the application primarily communicates using HTTP/2,
but also needs to support HTTP/1.1, such as to respond to Kubernetes
HTTP readiness/liveness probes.
Co-authored-by: Derek Menteer <derek.menteer@hashicorp.com>
Previously, when using implicit upstreams, we'd build outbound listener per destination instead of one for all destinations. This will result in port conflicts when trying to send this config to envoy.
This PR also makes sure that leaf and root references are always added (before we would only add it if there are inbound non-mesh ports).
Also, black-hole traffic when there are no inbound ports other than mesh
Reworks the sidecar controller to accept ComputedRoutes as an input and use it to generate appropriate ProxyStateTemplate resources containing L4/L7 mesh configuration.
* mesh-controller: handle L4 protocols for a proxy without upstreams
* sidecar-controller: Support explicit destinations for L4 protocols and single ports.
* This controller generates and saves ProxyStateTemplate for sidecar proxies.
* It currently supports single-port L4 ports only.
* It keeps a cache of all destinations to make it easier to compute and retrieve destinations.
* It will update the status of the pbmesh.Upstreams resource if anything is invalid.
* endpoints-controller: add workload identity to the service endpoints resource
* small fixes
* review comments
* Address PR comments
* sidecar-proxy controller: Add support for transparent proxy
This currently does not support inferring destinations from intentions.
* PR review comments
* mesh-controller: handle L4 protocols for a proxy without upstreams
* sidecar-controller: Support explicit destinations for L4 protocols and single ports.
* This controller generates and saves ProxyStateTemplate for sidecar proxies.
* It currently supports single-port L4 ports only.
* It keeps a cache of all destinations to make it easier to compute and retrieve destinations.
* It will update the status of the pbmesh.Upstreams resource if anything is invalid.
* endpoints-controller: add workload identity to the service endpoints resource
* small fixes
* review comments
* Make sure endpoint refs route to mesh port instead of an app port
* Address PR comments
* fixing copyright
* tidy imports
* sidecar-proxy controller: Add support for transparent proxy
This currently does not support inferring destinations from intentions.
* tidy imports
* add copyright headers
* Prefix sidecar proxy test files with source and destination.
* Update controller_test.go
* NET-5132 - Configure multiport routing for connect proxies in TProxy mode
* formatting golden files
* reverting golden files and adding changes in manually. build implicit destinations still has some issues.
* fixing files that were incorrectly repeating the outbound listener
* PR comments
* extract AlpnProtocol naming convention to getAlpnProtocolFromPortName(portName)
* removing address level filtering.
* adding license to resources_test.go
---------
Co-authored-by: Iryna Shustava <iryna@hashicorp.com>
Co-authored-by: R.B. Boyer <rb@hashicorp.com>
Co-authored-by: github-team-consul-core <github-team-consul-core@hashicorp.com>
* Fixes issues in setting status
* Update golden files for changes to xds generation to not use deprecated
methods
* Fixed default for validation of JWT for route