This has the biggest impact on enterprise test cases that use namespaced
registrations, which prior to this change sometimes failed the initial
registration because the namespace was not yet created.
Added a new option `ui_config.metrics_proxy.path_allowlist`. This defaults to `["/api/v1/query", "/api/v1/query_range"]` when the metrics provider is set to `prometheus`.
Requests that do not use one of the allow-listed paths (via exact match) get a 403 Forbidden response instead.
The key thing here is to use `curl --no-keepalive` so that envoy
pre-1.15 tests will reliably use the latest listener every time.
Extra:
- Switched away from editing line-item intentions the legacy way.
- Removed some teardown scripts, as we don't share anything between cases anyway
- Removed unnecessary use of `run` in some places.
There is a delay between an intentions change being made, and it being
reflected in the Envoy runtime configuration. Now that the enforcement
happens inside of Envoy instead of over in the agent, our tests need to
explicitly wait until the xDS reconfiguration is complete before
attempting to assert intentions worked.
Also remove a few double retry loops.
This speeds up individual envoy integration test runs from ~23m to ~14m.
It's also a pre-req for possibly switching to doing the tests entirely within Go (no shell-outs).
Extend Consul’s intentions model to allow for request-based access control enforcement for HTTP-like protocols in addition to the existing connection-based enforcement for unspecified protocols (e.g. tcp).
Related changes:
- hard-fail the xDS connection attempt if the envoy version is known to be too old to be supported
- remove the RouterMatchSafeRegex proxy feature since all supported envoy versions have it
- stop using --max-obj-name-len (due to: envoyproxy/envoy#11740)
A port can be sent in the Host header as defined in the HTTP RFC, so we
take any hosts that we want to match traffic to and also add another
host with the listener port added.
Also fix an issue with envoy integration tests not running the
case-ingress-gateway-tls test.
Previously, we did not require the 'service-name.*' host header value
when on a single http service was exposed. However, this allows a user
to get into a situation where, if they add another service to the
listener, suddenly the previous service's traffic might not be routed
correctly. Thus, we always require the Host header, even if there is
only 1 service.
Also, we add the make the default domain matching more restrictive by
matching "service-name.ingress.*" by default. This lines up better with
the namespace case and more accurately matches the Consul DNS value we
expect people to use in this case.
The DNS resolution will be handled by Envoy and defaults to LOGICAL_DNS. This discovery type can be overridden on a per-gateway basis with the envoy_dns_discovery_type Gateway Option.
If a service contains an instance with a hostname as an address we set the Envoy cluster to use DNS as the discovery type rather than EDS. Since both mesh gateways and terminating gateways route to clusters using SNI, whenever there is a mix of hostnames and IP addresses associated with a service we use the hostname + CDS rather than the IPs + EDS.
Note that we detect hostnames by attempting to parse the service instance's address as an IP. If it is not a valid IP we assume it is a hostname.
The previous change, which moved test running to Go, appears to have
broken log capturing. I am not entirely sure why, but the run_tests
function seems to exit on the first error.
This change moves test teardown and log capturing out of run_test, and
has the go test runner call them when necessary.
* test/integration: only run against 1 envoy version
These tests are slow enough that it seems unlikely that anyone is
running multiple versions locally. If someone wants to, a for loop
outside of run_test.sh should do the right thing.
Remove unused vars.
* Remove logic to iterate over test cases, run a single case
* Add a golang runner for integration tests
* Use build tags for envoy integration tests
And add junit-xml report
We require any non-wildcard services to match the protocol defined in
the listener on write, so that we can maintain a consistent experience
through ingress gateways. This also helps guard against accidental
misconfiguration by a user.
- Update tests that require an updated protocol for ingress gateways
- Validate that this cannot be set on a 'tcp' listener nor on a wildcard
service.
- Add Hosts field to api and test in consul config write CLI
- xds: Configure envoy with user-provided hosts from ingress gateways
This commit adds the necessary changes to allow an ingress gateway to
route traffic from a single defined port to multiple different upstream
services in the Consul mesh.
To do this, we now require all HTTP requests coming into the ingress
gateway to specify a Host header that matches "<service-name>.*" in
order to correctly route traffic to the correct service.
- Differentiate multiple listener's route names by port
- Adds a case in xds for allowing default discovery chains to create a
route configuration when on an ingress gateway. This allows default
services to easily use host header routing
- ingress-gateways have a single route config for each listener
that utilizes domain matching to route to different services.
* Implements a simple, tcp ingress gateway workflow
This adds a new type of gateway for allowing Ingress traffic into Connect from external services.
Co-authored-by: Chris Piraino <cpiraino@hashicorp.com>
This fixes this bats warning:
duplicate test name(s) in /workdir/primary/bats/verify.bats: test_s1_upstream_made_1_connection
Test was already defined at line 42, rename it to avoid test name duplication
This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch:
There are several distinct chunks of code that are affected:
* new flags and config options for the server
* retry join WAN is slightly different
* retry join code is shared to discover primary mesh gateways from secondary datacenters
* because retry join logic runs in the *agent* and the results of that
operation for primary mesh gateways are needed in the *server* there are
some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur
at multiple layers of abstraction just to pass the data down to the right
layer.
* new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers
* the function signature for RPC dialing picked up a new required field (the
node name of the destination)
* several new RPCs for manipulating a FederationState object:
`FederationState:{Apply,Get,List,ListMeshGateways}`
* 3 read-only internal APIs for debugging use to invoke those RPCs from curl
* raft and fsm changes to persist these FederationStates
* replication for FederationStates as they are canonically stored in the
Primary and replicated to the Secondaries.
* a special derivative of anti-entropy that runs in secondaries to snapshot
their local mesh gateway `CheckServiceNodes` and sync them into their upstream
FederationState in the primary (this works in conjunction with the
replication to distribute addresses for all mesh gateways in all DCs to all
other DCs)
* a "gateway locator" convenience object to make use of this data to choose
the addresses of gateways to use for any given RPC or gossip operation to a
remote DC. This gets data from the "retry join" logic in the agent and also
directly calls into the FSM.
* RPC (`:8300`) on the server sniffs the first byte of a new connection to
determine if it's actually doing native TLS. If so it checks the ALPN header
for protocol determination (just like how the existing system uses the
type-byte marker).
* 2 new kinds of protocols are exclusively decoded via this native TLS
mechanism: one for ferrying "packet" operations (udp-like) from the gossip
layer and one for "stream" operations (tcp-like). The packet operations
re-use sockets (using length-prefixing) to cut down on TLS re-negotiation
overhead.
* the server instances specially wrap the `memberlist.NetTransport` when running
with gateway federation enabled (in a `wanfed.Transport`). The general gist is
that if it tries to dial a node in the SAME datacenter (deduced by looking
at the suffix of the node name) there is no change. If dialing a DIFFERENT
datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh
gateways to eventually end up in a server's :8300 port.
* a new flag when launching a mesh gateway via `consul connect envoy` to
indicate that the servers are to be exposed. This sets a special service
meta when registering the gateway into the catalog.
* `proxycfg/xds` notice this metadata blob to activate additional watches for
the FederationState objects as well as the location of all of the consul
servers in that datacenter.
* `xds:` if the extra metadata is in place additional clusters are defined in a
DC to bulk sink all traffic to another DC's gateways. For the current
datacenter we listen on a wildcard name (`server.<dc>.consul`) that load
balances all servers as well as one mini-cluster per node
(`<node>.server.<dc>.consul`)
* the `consul tls cert create` command got a new flag (`-node`) to help create
an additional SAN in certs that can be used with this flavor of federation.
* add 1.12.2
* add envoy 1.13.0
* Introduce -envoy-version to get 1.10.0 passing.
* update old version and fix consul-exec case
* add envoy_version and fix check
* Update Envoy CLI tests to account for the 1.13 compatibility changes.
Co-authored-by: Matt Keeler <mkeeler@users.noreply.github.com>
* Expose Envoy /stats for statsd agents; Add testcases
* Remove merge conflict leftover
* Add support for prefix instead of path; Fix docstring to mirror these changes
* Add new config field to docs; Add testcases to check that /stats/prometheus is exposed as well
* Parametrize matchType (prefix or path) and value
* Update website/source/docs/connect/proxies/envoy.md
Co-Authored-By: Paul Banks <banks@banksco.de>
Co-authored-by: Paul Banks <banks@banksco.de>
* Adds 'limits' field to the upstream configuration of a connect proxy
This allows a user to configure the envoy connect proxy with
'max_connections', 'max_queued_requests', and 'max_concurrent_requests'. These
values are defined in the local proxy on a per-service instance basis
and should thus NOT be thought of as a global-level or even service-level value.
* Allow RSA CA certs for consul and vault providers to correctly sign EC leaf certs.
* Ensure key type ad bits are populated from CA cert and clean up tests
* Add integration test and fix error when initializing secondary CA with RSA key.
* Add more tests, fix review feedback
* Update docs with key type config and output
* Apply suggestions from code review
Co-Authored-By: R.B. Boyer <rb@hashicorp.com>
Previously the logic for configuring RDS during LDS for L7 upstreams was
overapplied to TCP proxies resulting in a cluster name of <emptystring>
being used incorrectly.
Fixes#6621
Fixes: #5396
This PR adds a proxy configuration stanza called expose. These flags register
listeners in Connect sidecar proxies to allow requests to specific HTTP paths from outside of the node. This allows services to protect themselves by only
listening on the loopback interface, while still accepting traffic from non
Connect-enabled services.
Under expose there is a boolean checks flag that would automatically expose all
registered HTTP and gRPC check paths.
This stanza also accepts a paths list to expose individual paths. The primary
use case for this functionality would be to expose paths for third parties like
Prometheus or the kubelet.
Listeners for requests to exposed paths are be configured dynamically at run
time. Any time a proxy, or check can be registered, a listener can also be
created.
In this initial implementation requests to these paths are not
authenticated/encrypted.
Since FUNCNAME is not defined when running outside a function,
trap does not work and display wrong error message.
Example from https://circleci.com/gh/hashicorp/consul/69506 :
```
⨯ FAIL
/home/circleci/project/test/integration/connect/envoy/run-tests.sh: line 1: FUNCNAME[0]: unbound variable
make: *** [GNUmakefile:363: test-envoy-integ] Error 1
```
This fix will avoid this error message and display the real cause.
Since generated envoy clusters all are named using (mostly) SNI syntax
we can have envoy read the various fields out of that structure and emit
it as stats labels to the various telemetry backends.
I changed the delimiter for the 'customization hash' from ':' to '~'
because ':' is always reencoded by envoy as '_' when generating metrics
keys.
Failover is pushed entirely down to the data plane by creating envoy
clusters and putting each successive destination in a different load
assignment priority band. For example this shows that normally requests
go to 1.2.3.4:8080 but when that fails they go to 6.7.8.9:8080:
- name: foo
load_assignment:
cluster_name: foo
policy:
overprovisioning_factor: 100000
endpoints:
- priority: 0
lb_endpoints:
- endpoint:
address:
socket_address:
address: 1.2.3.4
port_value: 8080
- priority: 1
lb_endpoints:
- endpoint:
address:
socket_address:
address: 6.7.8.9
port_value: 8080
Mesh gateways route requests based solely on the SNI header tacked onto
the TLS layer. Envoy currently only lets you configure the outbound SNI
header at the cluster layer.
If you try to failover through a mesh gateway you ideally would
configure the SNI value per endpoint, but that's not possible in envoy
today.
This PR introduces a simpler way around the problem for now:
1. We identify any target of failover that will use mesh gateway mode local or
remote and then further isolate any resolver node in the compiled discovery
chain that has a failover destination set to one of those targets.
2. For each of these resolvers we will perform a small measurement of
comparative healths of the endpoints that come back from the health API for the
set of primary target and serial failover targets. We walk the list of targets
in order and if any endpoint is healthy we return that target, otherwise we
move on to the next target.
3. The CDS and EDS endpoints both perform the measurements in (2) for the
affected resolver nodes.
4. For CDS this measurement selects which TLS SNI field to use for the cluster
(note the cluster is always going to be named for the primary target)
5. For EDS this measurement selects which set of endpoints will populate the
cluster. Priority tiered failover is ignored.
One of the big downsides to this approach to failover is that the failover
detection and correction is going to be controlled by consul rather than
deferring that entirely to the data plane as with the prior version. This also
means that we are bound to only failover using official health signals and
cannot make use of data plane signals like outlier detection to affect
failover.
In this specific scenario the lack of data plane signals is ok because the
effectiveness is already muted by the fact that the ultimate destination
endpoints will have their data plane signals scrambled when they pass through
the mesh gateway wrapper anyway so we're not losing much.
Another related fix is that we now use the endpoint health from the
underlying service, not the health of the gateway (regardless of
failover mode).
* connect: reconcile how upstream configuration works with discovery chains
The following upstream config fields for connect sidecars sanely
integrate into discovery chain resolution:
- Destination Namespace/Datacenter: Compilation occurs locally but using
different default values for namespaces and datacenters. The xDS
clusters that are created are named as they normally would be.
- Mesh Gateway Mode (single upstream): If set this value overrides any
value computed for any resolver for the entire discovery chain. The xDS
clusters that are created may be named differently (see below).
- Mesh Gateway Mode (whole sidecar): If set this value overrides any
value computed for any resolver for the entire discovery chain. If this
is specifically overridden for a single upstream this value is ignored
in that case. The xDS clusters that are created may be named differently
(see below).
- Protocol (in opaque config): If set this value overrides the value
computed when evaluating the entire discovery chain. If the normal chain
would be TCP or if this override is set to TCP then the result is that
we explicitly disable L7 Routing and Splitting. The xDS clusters that
are created may be named differently (see below).
- Connect Timeout (in opaque config): If set this value overrides the
value for any resolver in the entire discovery chain. The xDS clusters
that are created may be named differently (see below).
If any of the above overrides affect the actual result of compiling the
discovery chain (i.e. "tcp" becomes "grpc" instead of being a no-op
override to "tcp") then the relevant parameters are hashed and provided
to the xDS layer as a prefix for use in naming the Clusters. This is to
ensure that if one Upstream discovery chain has no overrides and
tangentially needs a cluster named "api.default.XXX", and another
Upstream does have overrides for "api.default.XXX" that they won't
cross-pollinate against the operator's wishes.
Fixes#6159
* Allow setting the mesh gateway mode for an upstream in config files
* Add envoy integration test for mesh gateways
This necessitated many supporting changes in most of the other test cases.
Add remote mode mesh gateways integration test
The main change is that we no longer filter service instances by health,
preferring instead to render all results down into EDS endpoints in
envoy and merely label the endpoints as HEALTHY or UNHEALTHY.
When OnlyPassing is set to true we will force consul checks in a
'warning' state to render as UNHEALTHY in envoy.
Fixes#6171
Additionally:
- wait for bootstrap config entries to be applied
- run the verify container in the host's PID namespace so we can kill
envoys without mounting the docker socket
* assert that we actually send HEALTHY and UNHEALTHY endpoints down in EDS during failover
Also:
- add back an internal http endpoint to dump a compiled discovery chain for debugging purposes
Before the CompiledDiscoveryChain.IsDefault() method would test:
- is this chain just one resolver step?
- is that resolver step just the default?
But what I forgot to test:
- is that resolver step for the same service that the chain represents?
This last point is important because if you configured just one config
entry:
kind = "service-resolver"
name = "web"
redirect {
service = "other"
}
and requested the chain for "web" you'd get back a **default** resolver
for "other". In the xDS code the IsDefault() method is used to
determine if this chain is "empty". If it is then we use the
pre-discovery-chain logic that just uses data embedded in the Upstream
object (and still lets the escape hatches function).
In the example above that means certain parts of the xDS code were going
to try referencing a cluster named "web..." despite the other parts of
the xDS code maintaining clusters named "other...".
When the envoy healthy panic threshold was explicitly disabled as part
of L7 traffic management it changed how envoy decided to load balance to
endpoints in a cluster. This only matters when envoy is in "panic mode"
aka "when you have a bunch of unhealthy endpoints". Panic mode sends
traffic to unhealthy instances in certain circumstances.
Note: Prior to explicitly disabling the healthy panic threshold, the
default value is 50%.
What was happening is that the test harness was bringing up consul the
sidecars, and the service instances all at once and sometimes the
proxies wouldn't have time to be checked by consul to be labeled as
'passing' in the catalog before a round of EDS happened.
The xDS server in consul effectively queries /v1/health/connect/s2 and
gets 1 result, but that one result has a 'critical' check so the xDS
server sends back that endpoint labeled as UNHEALTHY.
Envoy sees that 100% of the endpoints in the cluster are unhealthy and
would enter panic mode and still send traffic to s2. This is why the
test suites PRIOR to disabling the healthy panic threshold worked. They
were _incorrectly_ passing.
When the healthy panic threshol is disabled, envoy never enters panic
mode in this situation and thus the cluster has zero healthy endpoints
so load balancing goes nowhere and the tests fail.
Why does this only affect the test suites for envoy 1.8.0? My guess is
that https://github.com/envoyproxy/envoy/pull/4442 was merged into the
1.9.x series and somehow that plays a role.
This PR modifies the bats scripts to explicitly wait until the upstream
sidecar is healthy as measured by /v1/health/connect/s2?passing BEFORE
trying to interrogate envoy which should make the tests less racy.
* Make cluster names SNI always
* Update some tests
* Ensure we check for prepared query types
* Use sni for route cluster names
* Proper mesh gateway mode defaulting when the discovery chain is used
* Ignore service splits from PatchSliceOfMaps
* Update some xds golden files for proper test output
* Allow for grpc/http listeners/cluster configs with the disco chain
* Update stats expectation
* Make exec test assert Envoy version - it was not rebuilding before and so often ran against wrong version. This makes 1.10 fail consistenty.
* Switch Envoy exec to use a named pipe rather than FD magic since Envoy 1.10 doesn't support that.
* Refactor to use an internal shim command for piping the bootstrap through.
* Fmt. So sad that vscode golang fails so often these days.
* go mod tidy
* revert go mod tidy changes
* Revert "ignore consul-exec tests until fixed (#5986)"
This reverts commit 683262a686.
* Review cleanups
* Upgrade xDS (go-control-plane) API to support Envoy 1.10.
This includes backwards compatibility shim to work around the ext_authz package rename in 1.10.
It also adds integration test support in CI for 1.10.0.
* Fix go vet complaints
* go mod vendor
* Update Envoy version info in docs
* Update website/source/docs/connect/proxies/envoy.md
* Make central conf test work when run in a suite.
This switches integration tests to hard restart Consul each time which causes less surpise when some tests need to set configs that don't work on consul reload. This also increases the isolation and repeatability of the tests by dropping Consul's state entirely for each case run.
* Remove aborted attempt to make restart optional.
* Add integration test for central config; fix central config WIP
* Add integration test for central config; fix central config WIP
* Set proxy protocol correctly and begin adding upstream support
* Add upstreams to service config cache key and start new notify watcher if they change.
This doesn't update the tests to pass though.
* Fix some merging logic get things working manually with a hack (TODO fix properly)
* Simplification to not allow enabling sidecars centrally - it makes no sense without upstreams anyway
* Test compile again and obvious ones pass. Lots of failures locally not debugged yet but may be flakes. Pushing up to see what CI does
* Fix up service manageer and API test failures
* Remove the enable command since it no longer makes much sense without being able to turn on sidecar proxies centrally
* Remove version.go hack - will make integration test fail until release
* Remove unused code from commands and upstream merge
* Re-bump version to 1.5.0
* Add support for HTTP proxy listeners
* Add customizable bootstrap configuration options
* Debug logging for xDS AuthZ
* Add Envoy Integration test suite with basic test coverage
* Add envoy command tests to cover new cases
* Add tracing integration test
* Add gRPC support WIP
* Merged changes from master Docker. get CI integration to work with same Dockerfile now
* Make docker build optional for integration
* Enable integration tests again!
* http2 and grpc integration tests and fixes
* Fix up command config tests
* Store all container logs as artifacts in circle on fail
* Add retries to outer part of stats measurements as we keep missing them in CI
* Only dump logs on failing cases
* Fix typos from code review
* Review tidying and make tests pass again
* Add debug logs to exec test.
* Fix legit test failure caused by upstream rename in envoy config
* Attempt to reduce cases of bad TLS handshake in CI integration tests
* bring up the right service
* Add prometheus integration test
* Add test for denied AuthZ both HTTP and TCP
* Try ANSI term for Circle
This patch removes the porter tool which hands out free ports from a
given range with a library which does the same thing. The challenge for
acquiring free ports in concurrent go test runs is that go packages are
tested concurrently and run in separate processes. There has to be some
inter-process synchronization in preventing processes allocating the
same ports.
freeport allocates blocks of ports from a range expected to be not in
heavy use and implements a system-wide mutex by binding to the first
port of that block for the lifetime of the application. Ports are then
provided sequentially from that block and are tested on localhost before
being returned as available.
* Testutil falls back to random ports w/o porter
This PR allows the testutil server to be used without porter.
* Adds sterner-sounding fallback comments.
* new config parser for agent
This patch implements a new config parser for the consul agent which
makes the following changes to the previous implementation:
* add HCL support
* all configuration fragments in tests and for default config are
expressed as HCL fragments
* HCL fragments can be provided on the command line so that they
can eventually replace the command line flags.
* HCL/JSON fragments are parsed into a temporary Config structure
which can be merged using reflection (all values are pointers).
The existing merge logic of overwrite for values and append
for slices has been preserved.
* A single builder process generates a typed runtime configuration
for the agent.
The new implementation is more strict and fails in the builder process
if no valid runtime configuration can be generated. Therefore,
additional validations in other parts of the code should be removed.
The builder also pre-computes all required network addresses so that no
address/port magic should be required where the configuration is used
and should therefore be removed.
* Upgrade github.com/hashicorp/hcl to support int64
* improve error messages
* fix directory permission test
* Fix rtt test
* Fix ForceLeave test
* Skip performance test for now until we know what to do
* Update github.com/hashicorp/memberlist to update log prefix
* Make memberlist use the default logger
* improve config error handling
* do not fail on non-existing data-dir
* experiment with non-uniform timeouts to get a handle on stalled leader elections
* Run tests for packages separately to eliminate the spurious port conflicts
* refactor private address detection and unify approach for ipv4 and ipv6.
Fixes#2825
* do not allow unix sockets for DNS
* improve bind and advertise addr error handling
* go through builder using test coverage
* minimal update to the docs
* more coverage tests fixed
* more tests
* fix makefile
* cleanup
* fix port conflicts with external port server 'porter'
* stop test server on error
* do not run api test that change global ENV concurrently with the other tests
* Run remaining api tests concurrently
* no need for retry with the port number service
* monkey patch race condition in go-sockaddr until we understand why that fails
* monkey patch hcl decoder race condidtion until we understand why that fails
* monkey patch spurious errors in strings.EqualFold from here
* add test for hcl decoder race condition. Run with go test -parallel 128
* Increase timeout again
* cleanup
* don't log port allocations by default
* use base command arg parsing to format help output properly
* handle -dc deprecation case in Build
* switch autopilot.max_trailing_logs to int
* remove duplicate test case
* remove unused methods
* remove comments about flag/config value inconsistencies
* switch got and want around since the error message was misleading.
* Removes a stray debug log.
* Removes a stray newline in imports.
* Fixes TestACL_Version8.
* Runs go fmt.
* Adds a default case for unknown address types.
* Reoders and reformats some imports.
* Adds some comments and fixes typos.
* Reorders imports.
* add unix socket support for dns later
* drop all deprecated flags and arguments
* fix wrong field name
* remove stray node-id file
* drop unnecessary patch section in test
* drop duplicate test
* add test for LeaveOnTerm and SkipLeaveOnInt in client mode
* drop "bla" and add clarifying comment for the test
* split up tests to support enterprise/non-enterprise tests
* drop raft multiplier and derive values during build phase
* sanitize runtime config reflectively and add test
* detect invalid config fields
* fix tests with invalid config fields
* use different values for wan sanitiziation test
* drop recursor in favor of recursors
* allow dns_config.udp_answer_limit to be zero
* make sure tests run on machines with multiple ips
* Fix failing tests in a few more places by providing a bind address in the test
* Gets rid of skipped TestAgent_CheckPerformanceSettings and adds case for builder.
* Add porter to server_test.go to make tests there less flaky
* go fmt
* Updates Raft library to get new snapshot/restore API.
* Basic backup and restore working, but need some cleanup.
* Breaks out a snapshot module and adds a SHA256 integrity check.
* Adds snapshot ACL and fills in some missing comments.
* Require a consistent read for snapshots.
* Make sure snapshot works if ACLs aren't enabled.
* Adds a bit of package documentation.
* Returns an empty response from restore to avoid EOF errors.
* Adds API client support for snapshots.
* Makes internal file names match on-disk file snapshots.
* Adds DC and token coverage for snapshot API test.
* Adds missing documentation.
* Adds a unit test for the snapshot client endpoint.
* Moves the connection pool out of the client for easier testing.
* Fixes an incidental issue in the prepared query unit test.
I realized I had two servers in bootstrap mode so this wasn't a good setup.
* Adds a half close to the TCP stream and fixes panic on error.
* Adds client and endpoint tests for snapshots.
* Moves the pool back into the snapshot RPC client.
* Adds a TLS test and fixes half-closes for TLS connections.
* Tweaks some comments.
* Adds a low-level snapshot test.
This is independent of Consul so we can pull this out into a library
later if we want to.
* Cleans up snapshot and archive and completes archive tests.
* Sends a clear error for snapshot operations in dev mode.
Snapshots require the Raft snapshots to be readable, which isn't supported
in dev mode. Send a clear error instead of a deep-down Raft one.
* Adds docs for the snapshot endpoint.
* Adds a stale mode and index feedback for snapshot saves.
This gives folks a way to extract data even if the cluster has no
leader.
* Changes the internal format of a snapshot from zip to tgz.
* Pulls in Raft fix to cancel inflight before a restore.
* Pulls in new Raft restore interface.
* Adds metadata to snapshot saves and a verify function.
* Adds basic save and restore snapshot CLI commands.
* Gets rid of tarball extensions and adds restore message.
* Fixes an incidental bad link in the KV docs.
* Adds documentation for the snapshot CLI commands.
* Scuttle any request body when a snapshot is saved.
* Fixes archive unit test error message check.
* Allows for nil output writers in snapshot RPC handlers.
* Renames hash list Decode to DecodeAndVerify.
* Closes the client connection for snapshot ops.
* Lowers timeout for restore ops.
* Updates Raft vendor to get new Restore signature and integrates with Consul.
* Bounces the leader's internal state when we do a restore.
R.B. Boyer
Freddy
Aaron Lane
Alvin Huang
s-christoff
Jack
Hans Hasselberg
Chris Piraino
Daniel Nephin
Daniel Nephin
Kyle Havlovitz
freddygv
Pierre Souchay
Pierre Souchay
Matt Keeler
Paschalis Tsilias
Paul Banks
Jack Pearkes
Paul Banks
Alvin Huang
James Phillips
Frank Schroeder
Alex Dadgar
James Phillips
Armon Dadgar
Nelson Elhage
William Tisäter