* Check for ACL write permissions on write
Link eventually will be creating a token, so require acl:write.
* Convert Run to Start, only allow to start once
* Always initialize HCP components at startup
* Support for updating config and client
* Pass HCP manager to controller
* Start HCP manager in link resource
Start as part of link creation rather than always starting. Update
the HCP manager with values from the link before starting as well.
* Fix metrics sink leaked goroutine
* Remove the hardcoded disabled hostname prefix
The HCP metrics sink will always be enabled, so the length of sinks will
always be greater than zero. This also means that we will also always
default to prefixing metrics with the hostname, which is what our
documentation states is the expected behavior anyway.
* Add changelog
* Check and set running status in one method
* Check for primary datacenter, add back test
* Clarify merge reasoning, fix timing issue in test
* Add comment about controller placement
* Expand on breaking change, fix typo in changelog
* If a workload does not implement a port, it should not be included in the list of endpoints for the Envoy cluster for that port.
* Adds tenancy tests for xds controller and xdsv2 resource generation, and adds all those files.
* The original change in this PR was for filtering the list of endpoints by the port being routed to (bullet 1). Since I made changes to sidecarproxycontroller golden files, I realized some of the golden files were unused because of the tenancy changes, so when I deleted those, that broke xds controller tests which weren't correctly using tenancy. So when I fixed that, then the xdsv2 tests broke, so I added tenancy support there too. So now, from sidecarproxy controller -> xds controller -> xdsv2 we now have tenancy support and all the golden files are lined up.
* API Gateway proto
* fix lint issue
* new line
* run make proto format
* checkpoint
* stub
* Update internal/mesh/internal/controllers/apigateways/controller.go
* Change logging of registered v2 resource endpoints to add /api prefix
Previous:
agent.http: Registered resource endpoint: endpoint=/demo/v1/executive
New:
agent.http: Registered resource endpoint: endpoint=/api/demo/v1/executive
This reduces confusion when attempting to call the APIs after looking at
the logs.
* Move config-dependent methods to separate package
In order to reuse the fetching and file creation part of the
bootstrap package, move the code that would cause cyclical
dependencies to a different package.
* Export needed bootstrap methods and variables
Also add back validating persisted config and update tests.
* Add support to check for just management token
Add a new method that fetches the bootstrap configuration only if
there isn't a valid management token file instead of checking for
all the hcp-config files.
* Pass data dir as a dependency to link controller
The link controller needs to check the data directory for
the hcp-config files.
* Fetch bootstrap config for token in controller
Load the management token when reconciling a link resource, which will
fetch the agent boostrap configuration if the token is not already
persisted locally. Skip this step if the cluster is in read-only mode.
* Validate resource ID format in link creation
* Handle unauthorized and forbidden errors
Check for 401 and 403s when making GNM requests, exit bootstrap fetch
loop and return specific failure statuses for link.
* Move test function to a testing file
* Log load and status write errors
* Exported services api implemented
* Tests added, refactored code
* Adding server tests
* changelog added
* Proto gen added
* Adding codegen changes
* changing url, response object
* Fixing lint error by having namespace and partition directly
* Tests changes
* refactoring tests
* Simplified uniqueness logic for exported services, sorted the response in order of service name
* Fix lint errors, refactored code
Add case insensitive param on service route match
This commit adds in a new feature that allows service routers to specify that
paths and path prefixes should ignore upper / lower casing when matching URLs.
Co-authored-by: Derek Menteer <105233703+hashi-derek@users.noreply.github.com>
Ultimately we will have to rectify wan federation with v2 catalog adjacent
experiments, but for now blanket prevent usage of the resource-apis,
v2dns, and v2tenancy experiments in secondary datacenters.
* Create HCP management token in HCP manager
* Change InitializeManagementToken to ManagementTokenUpserter
* Implement and use management token upsert function
* Fix race condition in test
* Add idea for improvement as comment
* Return early in upsertManagementToken if token exists
* Add Initializer to the controller
The Initializer adds support for running any required initialization
steps when the controller is first started.
* Implement HCP Link initializer
The link initializer will create a Link resource if the
cloud configuration has been set.
* Simplify retry logic and testing
* Remove internal retry, replace with logging logic
This add a fix to properly verify the gateway mode before creating a watch specific to mesh gateways. This watch have a high performance cost and when mesh gateways are not used is not used.
This also adds an optimization to only return the nodes when watching the Internal.ServiceDump RPC to avoid unnecessary disco chain compilation. As watches in proxy config only need the nodes.
* Option to set HCP client at runtime
Allows us to initially set a nil HCP client for the
telemetry provider and update it later.
* Set telemetry provider HCP client in HCP manager
Set the telemetry provider as a dependency and pass it to
the manager. Update the telemetry provider's HCP client
when the HCP manager starts.
* Add a provider interface for the metrics client
This provider will allow us to configure and reconfigure the
retryable HTTP client and the headers for the metrics client.
* Move HTTP retryable client to separate file
Copied directly from the metrics client.
* Abstract HCP specific values in HTTP client
Remove HCP specific references and instead initiate with
a generic TLS configuration and authentication source.
* Set up HTTP client and headers in the provider
Move setup from the metrics client to the HCP telemetry
provider.
* Update the telemetry provider in the HCP manager
Initialize the provider without the HCP configs and then update
it in the HCP manager to enable it.
* Improve test assertion, fix method comment
* Move client provider to metrics client
* Stop the manager on setup error
* Add separate lock for http configuration
* Start telemetry provider in HCP manager
* Update HCP client and config as part of Run
* Remove option to set config at initialization
* Simplify and clean up setting HCP configs
* Add test for telemetry provider Run method
* Fix race condition
* Use clone of HTTP headers
* Only allow initial update and run once
* Increase timeouts for flakey peering test.
* Various test fixes.
* Fix race condition in reconcilePeering.
This resolves an issue where a peering object in the state store was
incorrectly mutated by a function, resulting in the test being flagged as
failing when the -race flag was used.
To fix an issue displaying the current reloaded config in the
v1/agent/self endpoint #18681 caused the agent's internal
config struct member to be deepcopied and replaced on reload.
This is not safe because the field is not protected by a lock, nor
should it be due to how it is accessed by the rest of the system.
This PR does the same deepcopy, but into a new field solely for
the point of capturing the current reloaded values for display
purposes. If there has been no reload then the original config is used.
* Implement In-Process gRPC for use by controller caching/indexing
This replaces the pipe base listener implementation we were previously using. The new style CAN avoid cloning resources which our controller caching/indexing is taking advantage of to not duplicate resource objects in memory.
To maintain safety for controllers and for them to be able to modify data they get back from the cache and the resource service, the client they are presented in their runtime will be wrapped with an autogenerated client which clones request and response messages as they pass through the client.
Another sizable change in this PR is to consolidate how server specific gRPC services get registered and managed. Before this was in a bunch of different methods and it was difficult to track down how gRPC services were registered. Now its all in one place.
* Fix race in tests
* Ensure the resource service is registered to the multiplexed handler for forwarding from client agents
* Expose peer streaming on the internal handler
* Add HCCLink resource type
* Register HCCLink resource type with basic validation
* Add validation for required fields
* Add test for default ACLs
* Add no-op controller for HCCLink
* Add resource-apis semantic validation check in hcclink controller
* Add copyright headers
* Rename HCCLink to Link
* Add hcp_cluster_url to link proto
* Update 'disabled' reason with more detail
* Update link status name to consul.io/hcp/link
* Change link version from v1 to v2
* Use feature flag/experiment to enable v2 resources with HCP
* Update SCADA provider version
Also update mocks for SCADA provider.
* Create SCADA provider w/o HCP config, then update
Adds a placeholder config option to allow us to initialize a SCADA provider
without the HCP configuration. Also adds an update method to then add the
HCP configuration. We need this to be able to eventually always register a
SCADA listener at startup before the HCP config values are known.
* Pass cloud configuration to HCP manager
Save the entire cloud configuration and pass it to the HCP
manager.
* Update and start SCADA provider in HCP manager
Move config updating and starting to the HCP manager. The HCP manager
will eventually be responsible for all processes that contribute
to linking to HCP.
* NET-6945 - Replace usage of deprecated Envoy field envoy.config.core.v3.HeaderValueOption.append
* update proto for v2 and then update xds v2 logic
* add changelog
* Update 20078.txt to be consistent with existing changelog entries
* swap enum values tomatch envoy.
* NET-6946 - Replace usage of deprecated Envoy field envoy.config.route.v3.HeaderMatcher.safe_regex_match
* removing unrelated changes
* update golden files
* do not set engine type
John Murret
Melissa Kam
Matt Keeler
Dan Stough
Tyler Wendlandt
Nitya Dhanushkodi
sarahalsmiller
Luke Kysow
Semir Patel
aahel
skpratt
Tauhid Anjum
Lord-Y
Nick Cellino
R.B. Boyer
Dhia Ayachi
Derek Menteer
loshz
Ganesh S
cskh