Commit Graph

136 Commits

Author SHA1 Message Date
R.B. Boyer 7eef25daf5
agent: when enable_central_service_config is enabled ensure agent reload doesn't revert check state to critical (#8747)
Likely introduced when #7345 landed.
2020-09-24 16:24:04 -05:00
Daniel Nephin c18516ad7d
Merge pull request #8680 from hashicorp/dnephin/replace-consul-opts-with-base-deps
agent: Repalce ConsulOptions with a new struct from agent.BaseDeps
2020-09-24 12:45:54 -04:00
Daniel Nephin cdd392d77f agent/consul: pass dependencies directly from agent
In an upcoming change we will need to pass a grpc.ClientConnPool from
BaseDeps into Server. While looking at that change I noticed all of the
existing consulOption fields are already on BaseDeps.

Instead of duplicating the fields, we can create a struct used by
agent/consul, and use that struct in BaseDeps. This allows us to pass
along dependencies without translating them into different
representations.

I also looked at moving all of BaseDeps in agent/consul, however that
created some circular imports. Resolving those cycles wouldn't be too
bad (it was only an error in agent/consul being imported from
cache-types), however this change seems a little better by starting to
introduce some structure to BaseDeps.

This change is also a small step in reducing the scope of Agent.

Also remove some constants that were only used by tests, and move the
relevant comment to where the live configuration is set.

Removed some validation from NewServer and NewClient, as these are not
really runtime errors. They would be code errors, which will cause a
panic anyway, so no reason to handle them specially here.
2020-09-15 17:29:32 -04:00
Daniel Nephin 0bb9c318b7 http: fix tests incorrectly using HTTPAddr to get the address of the
https server.

In #8234 I changed a few tests to use TestAgent.HTTPAddr() to find the
addr used in the test. Due to the way HTTPAddr() was implemented these
tests were passing, but I think the pass was incidental. HTTPAddr() was
not matching any servers, and was instead returning the last server,
which happened to be the one these tests wanted.

This commit fixes the implementation of HTTPAddr to panic if no match
was found. The tests which require an HTTPS server are changed to use
a new firstAddr() to look up the correct address.
2020-09-04 15:29:17 -04:00
Daniel Nephin 4c9ed41eab
Merge pull request #8554 from hashicorp/dnephin/agent-setup-persisted-tokens
agent: move token persistence from agent into token.Store
2020-09-03 17:29:21 -04:00
Daniel Nephin 6ca45e1a61 agent: add apiServers type for managing HTTP servers
Remove Server field from HTTPServer. The field is no longer used.
2020-09-03 13:40:12 -04:00
Daniel Nephin 330be5b740 agent/token: Move token persistence out of agent
And into token.Store. This change isolates any awareness of token
persistence in a single place.

It is a small step in allowing Agent.New to accept its dependencies.
2020-08-31 15:00:34 -04:00
Daniel Nephin 72bf350069
Merge pull request #8552 from pierresouchay/reload_cache_throttling_config
Ensure that Cache options are reloaded when `consul reload` is performed
2020-08-28 15:04:42 -04:00
Pierre Souchay 9a64d3e5fe Also test reload of EntryFetchMaxBurst 2020-08-27 18:14:05 +02:00
Matt Keeler f97cc0445a
Move RPC router from Client/Server and into BaseDeps (#8559)
This will allow it to be a shared component which is needed for AutoConfig
2020-08-27 11:23:52 -04:00
Pierre Souchay 5842a902df Tests that changes in rate limit are taken into account by agent 2020-08-27 16:41:20 +02:00
Daniel Nephin d68edcecf4 testing: Remove all the defer os.Removeall
Now that testutil uses t.Cleanup to remove the directory the caller no longer has to manage
the removal
2020-08-14 19:58:53 -04:00
Daniel Nephin 3a4e62836b testing: Remove TestAgent.Key and change TestAgent.DataDir
TestAgent.Key was only used by 3 tests. Extracting it from the common helper that is used in hundreds of
tests helps keep the shared part small and more focused.

This required a second change (which I was planning on making anyway), which was to change the behaviour of
DataDir. Now in all cases the TestAgent will use the DataDir, and clean it up once the test is complete.
2020-08-13 17:53:24 -04:00
Daniel Nephin 0738eb8596 Extract nodeID functions to a different file
In preparation for turning them into functions.
To reduce the scope of Agent, and refactor how Agent is created and started.
2020-08-12 13:05:10 -04:00
Daniel Nephin 38980ebb4c config: Make Source an interface
This will allow us to accept config from auto-config without needing to
go through a serialziation cycle.
2020-08-10 12:46:28 -04:00
Matt Keeler 1a78cf9b4c
Ensure certificates retrieved through the cache get persisted with auto-config (#8409) 2020-07-30 11:37:18 -04:00
Matt Keeler 34034b76f5
Agent Auto Config: Implement Certificate Generation (#8360)
Most of the groundwork was laid in previous PRs between adding the cert-monitor package to extracting the logic of signing certificates out of the connect_ca_endpoint.go code and into a method on the server.

This also refactors the auto-config package a bit to split things out into multiple files.
2020-07-28 15:31:48 -04:00
Matt Keeler 83d09de230
Fix some broken code in master
There were several PRs that while all passed CI independently, when they all got merged into the same branch caused compilation errors in test code.

The main changes that caused issues where changing agent/cache.Cache.New to require a concrete options struct instead of a pointer. This broke the cert monitor tests and the catalog_list_services_test.go. Another change was made to unembed the http.Server from the agent.HTTPServer struct. That coupled with another change to add a test to ensure cache rate limiting coming from HTTP requests was working as expected caused compilation failures.
2020-07-28 09:50:10 -04:00
Pierre Souchay 505de6dc29
Added ratelimit to handle throtling cache (#8226)
This implements a solution for #7863

It does:

    Add a new config cache.entry_fetch_rate to limit the number of calls/s for a given cache entry, default value = rate.Inf
    Add cache.entry_fetch_max_burst size of rate limit (default value = 2)

The new configuration now supports the following syntax for instance to allow 1 query every 3s:

    command line HCL: -hcl 'cache = { entry_fetch_rate = 0.333}'
    in JSON

{
  "cache": {
    "entry_fetch_rate": 0.333
  }
}
2020-07-27 23:11:11 +02:00
Matt Keeler 6e7acfa618
Add an AutoEncrypt “integration” test
Also fix a bug where Consul could segfault if TLS was enabled but no client certificate was provided. How no one has reported this as a problem I am not sure.
2020-06-30 15:23:29 -04:00
Daniel Nephin 0279bf6fe5 Update TestAgent_GetCoordinate
The old test case was a very specific regresion test for a case that is no longer possible.
Replaced with a new test that checks the default coordinate is returned.
2020-06-24 13:00:15 -04:00
Daniel Nephin 010a609912 Fix a bunch of unparam lint issues 2020-06-24 13:00:14 -04:00
Matt Keeler b0fcf86140 Change auto config authorizer to allow for future extension
The envisioned changes would allow extra settings to enable dynamically defined auth methods to be used instead of  or in addition to the statically defined one in the configuration.
2020-06-18 15:22:24 -04:00
Matt Keeler 3dbbd2d37d
Implement Client Agent Auto Config
There are a couple of things in here.

First, just like auto encrypt, any Cluster.AutoConfig RPC will implicitly use the less secure RPC mechanism.

This drastically modifies how the Consul Agent starts up and moves most of the responsibilities (other than signal handling) from the cli command and into the Agent.
2020-06-17 16:49:46 -04:00
Daniel Nephin 068b43df90 Enable gofmt simplify
Code changes done automatically with 'gofmt -s -w'
2020-06-16 13:21:11 -04:00
Hans Hasselberg dfcf45c6cf
tests: use constructor instead init (#8024) 2020-06-04 22:59:06 +02:00
Pierre Souchay 9813ae512b
checks: when a service does not exists in an alias, consider it failing (#7384)
In current implementation of Consul, check alias cannot determine
if a service exists or not. Because a service without any check
is semantically considered as passing, so when no healthchecks
are found for an agent, the check was considered as passing.

But this make little sense as the current implementation does not
make any difference between:
 * a non-existing service (passing)
 * a service without any check (passing as well)

In order to make it work, we have to ensure that when a check did
not find any healthcheck, the service does indeed exists. If it
does not, lets consider the check as failing.
2020-06-04 14:50:52 +02:00
Daniel Nephin 99eb583ebc
Replace goe/verify.Values with testify/require.Equal (#7993)
* testing: replace most goe/verify.Values with require.Equal

One difference between these two comparisons is that go/verify considers
nil slices/maps to be equal to empty slices/maps, where as testify/require
does not, and does not appear to provide any way to enable that behaviour.

Because of this difference some expected values were changed from empty
slices to nil slices, and some calls to verify.Values were left.

* Remove github.com/pascaldekloe/goe/verify

Reduce the number of assertion packages we use from 2 to 1
2020-06-02 12:41:25 -04:00
Daniel Nephin 600645b5f9 Add unconvert linter
To find unnecessary type convertions
2020-05-12 13:47:25 -04:00
Pierre Souchay 2a8bf45e38
agent: show warning when enable_script_checks is enabled without safty net (#7437)
In order to enforce a bit security on Consul agents, add a new method in agent
to highlight possible security issues.

This does not return an error for now, but might in the future.

For now, it detects issues such as:

https://www.hashicorp.com/blog/protecting-consul-from-rce-risk-in-specific-configurations/

This would display this kind of messages:

```
2020-03-11T18:27:49.873+0100 [ERROR] agent: [SECURITY] issue: error="using enable-script-checks without ACLs and without allow_write_http_from is DANGEROUS, use enable-local-script-checks instead see https://www.hashicorp.com/blog/protecting-consul-from-rce-risk-in-specific-configurations/"
```
2020-04-02 09:59:23 +02:00
Daniel Nephin e759daafdd Rename NewTestAgentWithFields to StartTestAgent
This function now only starts the agent.

Using:

git grep -l 'StartTestAgent(t, true,' | \
        xargs sed -i -e 's/StartTestAgent(t, true,/StartTestAgent(t,/g'
2020-03-31 17:14:55 -04:00
Daniel Nephin f9f6b14533 Convert the remaining calls to NewTestAgentWithFields
After removing the t.Name() parameter with sed, convert the last few tests which
use a custom name to call NewTestAgentWithFields instead.
2020-03-31 17:14:55 -04:00
Daniel Nephin 475659a132 Remove name from NewTestAgent
Using:

git grep -l 'NewTestAgent(t, t.Name(),' | \
    xargs sed -i -e 's/NewTestAgent(t, t.Name(),/NewTestAgent(t,/g'
2020-03-31 16:13:44 -04:00
Daniel Nephin ad7c78f134 Remove t.Name() from TestAgent.Name
And re-add the name to the logger so that log messages from different agents
in a single can be identified.
2020-03-30 16:47:24 -04:00
Daniel Nephin dd40a1535e testing: reduce verbosity of output log
Previously the log output included the test name twice and a long date
format. The test output is already grouped by test, so adding the test
name did not add any new information. The date and time are only useful
to understand elapsed time, so using a short format should provide
succident detail.

Also fixed a bug in NewTestAgentWithFields where nil was returned
instead of the test agent.
2020-03-30 13:23:13 -04:00
Chris Piraino 136099d834
Fix flakey health check reload test (#7490)
This test would occasionally fail because we checked for a status of
"critical" initially. This races with the actual healthcheck being run
and declared passing.

We instead use a ttl health check so that we don't rely on timing at all.
2020-03-25 09:09:13 -05:00
R.B. Boyer 6adad71125
wan federation via mesh gateways (#6884)
This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch:

There are several distinct chunks of code that are affected:

* new flags and config options for the server

* retry join WAN is slightly different

* retry join code is shared to discover primary mesh gateways from secondary datacenters

* because retry join logic runs in the *agent* and the results of that
  operation for primary mesh gateways are needed in the *server* there are
  some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur
  at multiple layers of abstraction just to pass the data down to the right
  layer.

* new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers

* the function signature for RPC dialing picked up a new required field (the
  node name of the destination)

* several new RPCs for manipulating a FederationState object:
  `FederationState:{Apply,Get,List,ListMeshGateways}`

* 3 read-only internal APIs for debugging use to invoke those RPCs from curl

* raft and fsm changes to persist these FederationStates

* replication for FederationStates as they are canonically stored in the
  Primary and replicated to the Secondaries.

* a special derivative of anti-entropy that runs in secondaries to snapshot
  their local mesh gateway `CheckServiceNodes` and sync them into their upstream
  FederationState in the primary (this works in conjunction with the
  replication to distribute addresses for all mesh gateways in all DCs to all
  other DCs)

* a "gateway locator" convenience object to make use of this data to choose
  the addresses of gateways to use for any given RPC or gossip operation to a
  remote DC. This gets data from the "retry join" logic in the agent and also
  directly calls into the FSM.

* RPC (`:8300`) on the server sniffs the first byte of a new connection to
  determine if it's actually doing native TLS. If so it checks the ALPN header
  for protocol determination (just like how the existing system uses the
  type-byte marker).

* 2 new kinds of protocols are exclusively decoded via this native TLS
  mechanism: one for ferrying "packet" operations (udp-like) from the gossip
  layer and one for "stream" operations (tcp-like). The packet operations
  re-use sockets (using length-prefixing) to cut down on TLS re-negotiation
  overhead.

* the server instances specially wrap the `memberlist.NetTransport` when running
  with gateway federation enabled (in a `wanfed.Transport`). The general gist is
  that if it tries to dial a node in the SAME datacenter (deduced by looking
  at the suffix of the node name) there is no change. If dialing a DIFFERENT
  datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh
  gateways to eventually end up in a server's :8300 port.

* a new flag when launching a mesh gateway via `consul connect envoy` to
  indicate that the servers are to be exposed. This sets a special service
  meta when registering the gateway into the catalog.

* `proxycfg/xds` notice this metadata blob to activate additional watches for
  the FederationState objects as well as the location of all of the consul
  servers in that datacenter.

* `xds:` if the extra metadata is in place additional clusters are defined in a
  DC to bulk sink all traffic to another DC's gateways. For the current
  datacenter we listen on a wildcard name (`server.<dc>.consul`) that load
  balances all servers as well as one mini-cluster per node
  (`<node>.server.<dc>.consul`)

* the `consul tls cert create` command got a new flag (`-node`) to help create
  an additional SAN in certs that can be used with this flavor of federation.
2020-03-09 15:59:02 -05:00
Pierre Souchay 864f7efffa
agent: configuration reload preserves check's statuses for services (#7345)
This fixes issue #7318

Between versions 1.5.2 and 1.5.3, a regression has been introduced regarding health
of services. A patch #6144 had been issued for HealthChecks of nodes, but not for healthchecks
of services.

What happened when a reload was:

1. save all healthcheck statuses
2. cleanup everything
3. add new services with healthchecks

In step 3, the state of healthchecks was taken into account locally,
so at step 3, but since we cleaned up at step 2, state was lost.

This PR introduces the snap parameter, so step 3 can use information from step 1
2020-03-09 12:59:41 +01:00
Chris Piraino 401221de58
Allow users to configure either unstructured or JSON logging (#7130)
* hclog Allow users to choose between unstructured and JSON logging
2020-01-28 17:50:41 -06:00
Aestek ba8fd8296f Add support for dual stack IPv4/IPv6 network (#6640)
* Use consts for well known tagged adress keys

* Add ipv4 and ipv6 tagged addresses for node lan and wan

* Add ipv4 and ipv6 tagged addresses for service lan and wan

* Use IPv4 and IPv6 address in DNS
2020-01-17 09:54:17 -05:00
Matt Keeler 5934f803bf
Sync of OSS changes to support namespaces (#6909) 2019-12-09 21:26:41 -05:00
Matt Keeler 8f0ab0129e
Miscellaneous Fixes (#6896)
Ensure we close the Sentinel Evaluator so as not to leak go routines

Fix a bunch of test logging so that various warnings when starting a test agent go to the ltest logger and not straight to stdout.

Various canned ent meta types always return a valid pointer (no more nils). This allows us to blindly deref + assign in various places.

Update ACL index tracking to ensure oss -> ent upgrades will work as expected.

Update ent meta parsing to include function to disallow wildcarding.
2019-12-06 14:01:34 -05:00
Freddy 60f6ec0c2f
Store check type in catalog (#6561) 2019-10-17 20:33:11 +02:00
R.B. Boyer 9566df524e
agent: cache notifications work after error if the underlying RPC returns index=1 (#6547)
Fixes #6521

Ensure that initial failures to fetch an agent cache entry using the
notify API where the underlying RPC returns a synthetic index of 1
correctly recovers when those RPCs resume working.

The bug in the Cache.notifyBlockingQuery used to incorrectly "fix" the
index for the next query from 0 to 1 for all queries, when it should
have not done so for queries that errored.

Also fixed some things that made debugging difficult:

- config entry read/list endpoints send back QueryMeta headers
- xds event loops don't swallow the cache notification errors
2019-09-26 10:42:17 -05:00
Freddy fdd10dd8b8
Expose HTTP-based paths through Connect proxy (#6446)
Fixes: #5396

This PR adds a proxy configuration stanza called expose. These flags register
listeners in Connect sidecar proxies to allow requests to specific HTTP paths from outside of the node. This allows services to protect themselves by only
listening on the loopback interface, while still accepting traffic from non
Connect-enabled services.

Under expose there is a boolean checks flag that would automatically expose all
registered HTTP and gRPC check paths.

This stanza also accepts a paths list to expose individual paths. The primary
use case for this functionality would be to expose paths for third parties like
Prometheus or the kubelet.

Listeners for requests to exposed paths are be configured dynamically at run
time. Any time a proxy, or check can be registered, a listener can also be
created.

In this initial implementation requests to these paths are not
authenticated/encrypted.
2019-09-25 20:55:52 -06:00
R.B. Boyer 5882e21b2b
agent: tolerate more failure scenarios during service registration with central config enabled (#6472)
Also:

* Finished threading replaceExistingChecks setting (from GH-4905)
  through service manager.

* Respected the original configSource value that was used to register a
  service or a check when restoring persisted data.

* Run several existing tests with and without central config enabled
  (not exhaustive yet).

* Switch to ioutil.ReadFile for all types of agent persistence.
2019-09-24 10:04:48 -05:00
R.B. Boyer f9496dc627 sdk: add freelist tracking and ephemeral port range skipping to freeport
This should cut down on test flakiness.

Problems handled:

- If you had enough parallel test cases running, the former circular
approach to handling the port block could hand out the same port to
multiple cases before they each had a chance to bind them, leading to
one of the two tests to fail.

- The freeport library would allocate out of the ephemeral port range.
This has been corrected for Linux (which should cover CI).

- The library now waits until a formerly-in-use port is verified to be
free before putting it back into circulation.
2019-09-17 14:30:43 -05:00
Sarah Adams 001137e5e5
test: ensure all TestAgent constructions use a constructor (#6443)
ensure all TestAgent constructions use a constructor to get start retries + test logs going to the right place

Fixes #6435
2019-09-05 10:24:36 -07:00
Sarah Adams 74461406e0
remove funky panic/recover in agent tests (#6442) 2019-09-04 13:59:11 -07:00
Sarah Adams 4ed5515fca
refactor & add better retry logic to NewTestAgent (#6363)
Fixes #6361
2019-09-03 15:05:51 -07:00