We'd assumed that TTL check outputs shouldn't be shown as it seemed like
they never had outputs, but they can be submitted with notes, which are
then converted into the output.
This unhides the output for TTLs and treats them exactly the same as
other healthchecks.
* Update Consul Service List composite rows with Tooltips and description lists
* Update Consul Service Instance List composite rows with Tooltips and description lists
* Removed line height in reduced pill to match the description lists in the composite rows
* Add all the new data required for NodeIdentities
* Add potential NodeIdentity to the token list component
* Amend the policy-form/selector to allow node identity creation
* Fix up CSS for radio buttons and select label
* Add node-identity policy template component
* Fix up and add acceptance tests for NodeIndentities
* Make sure policy previews take node identities into account
* Only show certain policy markup if those we have those policies
* Potentially temporarily hide dt's that don't have icons yet
This mixin was a very thin mixin over the top of our listeners utility,
and we have been gradually preferring using the utility straight rather
than using the mixin. This commit removes the last places where we still
used the mixin, and also potentially the last few places where we
continued to use the old API for our listeners utility.
The WithEventSource mixin was responsible for catching EventSource
errors and cleaning up events sources then the user left a Controller.
As we are trying to avoid mixin usage, we moved this all to an
`EventSource` component, which can clean up when the component is
removed from the page, and also fires an onerror event.
Moving to a component firing an onerror event means we can also remove
all of our custom computed property work that we were using previously
to catch errors (thrown when a service etc. is removed)
* Add Health Checks and update Tooltips in Ingress Upstreams
* Update Tooltip in Proxy Info tab Upstreams
* Add Tooltips to Proxy Info tab Exposed Paths
* Add Health Checks with Tooltips to Service List page
* ui: CSS and component changes to the <EmptyState /> component
* ui: Reset the auth-form component back to its initial state
Moving forwards we are going to have the auth-form on the page all the
time, even when logged in (for relogging in purposes). This means the
auth-form will not always be removed from the DOM when you log in.
This sets the form back to its idle state before calling onsubmit
* ui: Make a public api for modal-dialog with a single close method
* ui : Move cache reset somewhere that makes more sense, + single refresh
1. Centralize cache resetting elsewhere, for now the store makes most
sense, although I would prefer the Repository class, so using the store
is temporary
2. We only need to refresh on login once, unless we have a differing
nspace
* ui: Ensure visibilitychange events are cleaned up
* ui: Only cache DataSource data if we have any, + only clear the cache
* ui: Add the modal login dialog to both unauth and auth views
This means we can 'relogin' when already logged in
* ui: Add new empty states
* ui: CSS Tweaks
* Remove marketing grays
It seems that blink/webkit browsers at least will leak memory when using
input[type=password] inputs. This only affects us during testing as we
'refresh' the ember app ~1000 times without actually refreshing
the browser. This means references to these HTML input elements mount
up now that every single page/test has an input[password] on it.
Following this change our memory usage during testing seems to have
reduced by as much as 75%.
During normal usage the single password element is only added to the
page once per login/logout.
* ui: Styling fixes (#7885)
* Move cellHeight to ListCollection js file
* Fix composite row border-top-color onHover state
* Add empty health check icon to CompositeRow styling
* ui: Slightly refactor %composite-rows and reuse ConsulServiceList component (#7886)
* ui: Move individual component types into a single %composite-list plus
1. Removes all out separate CSS components (that match HTML components)
to favour not having those separate for the moemnt at least
2. Reuses <ConsulServiceList /> component for Terminating Gateways >
Linked Services
* ui: Tweak breadcrumb spacing for '/' separator
* Fix up the tests i.e. services per tab so we can call them all services
* ui: Misc discovery chain fixes (#7892)
1. Look for a default splitter before looking for a default resolver in
order to route to.
2. Delay adding svg listeners until afterRender (fixes split tooltip)
3. Make router id's consistent for highlighting default routers in when
clicking the graph
* ui: If an error occurs on the server, surface it in the notification (#7893)
* ui: Delete old unused CSS (#7909)
This commit deletes CSS that we no longer use and we definitely will not
ever use.
We also dedup all of our imports here as it turns out SASS doesn't
dedupe imports. Strangely this increases out CSS weight by ~1kb instead
of reducing but we'd rather keep things deduped as that was the
intention
* ui: Redesign - Exposed Paths (#7912)
* Add new exposed paths icons to codebase
* Redesign Exposed Paths and create copy-button hover on Composite Row
* Refactor FeedbackDialog and CopyButton
* Change this.element to use `{{ref }}` now we don't have an element
We changed this to a tagless component with an eye to moving this to a
glimmer component, without spotting that this would also remove the
`this.element` property.
This adds an equivalent using the ref modifier.
Co-authored-by: John Cowen <jcowen@hashicorp.com>
* ui: Remove box-shadow and pointer cursor from metada list hover effect (#7914)
Co-authored-by: Kenia <19161242+kaxcode@users.noreply.github.com>
1. Ensure dropdown menus function correctly in Safari
2. Ensure default grey color for buttons is not used
3. Ensure IntersectionObservers are cleaned up properly in Safari
* ui: Combine all "see/don't see" steps into one step
* Fix up broken tests
* Add some test meta data/titles
* Test out proxies in the service listing
* Remove comments
* ui: Renames CopyButtonFeedback to CopyButton and use it everywhere
* Uncapitalize output
* Remove the ability to set the contents via an attr, and..
..change the attribute for the string that gets copied to be called
'value' so it feels like HTML
* ui: If an auth-method is in another namespace than default, make that clear
* Pass through the namespace of the auth method rather than use the current
* Make sure we refresh the application route, before redirecting
This ensure that the nspaces and are refreshed in the main nav menu
* 6 new components for new login/logout flow, plus SSO support
UI Components:
1. AuthDialog: Wraps/orchestrates AuthForm and AuthProfile
2. AuthForm: Authorization form shown when logged out.
3. AuthProfile: Simple presentational component to show the users
'Profile'
4. OidcSelect: A 'select' component for selecting an OIDC provider,
dynamically uses either a single select menu or multiple buttons
depending on the amount of providers
Data Components:
1. JwtSource: Given an OIDC provider URL this component will request a
token from the provider and fire an donchange event when it has been
retrieved. Used by TokenSource.
2. TokenSource: Given a oidc provider name or a Consul SecretID,
TokenSource will use whichever method/API requests required to retrieve
Consul ACL Token, which is emitted to the onchange event handler.
Very basic README documentation included here, which is likely to be
refined somewhat.
* CSS required for new auth/SSO UI components
* Remaining app code required to tie the new auth/SSO work together
* CSS code required to help tie the auth/SSO work together
* Test code in order to get current tests passing with new auth/SSO flow
..plus extremely basics/skipped rendering tests for the new components
* Treat the secret received from the server as the truth
Previously we've always treated what the user typed as the truth, this
breaks down when using SSO as the user doesn't type anything to retrieve
a token. Therefore we change this so that we use the secret in the API
response as the truth.
* Make sure removing an dom tree from a buffer only removes its own tree
1. When choosing Services/Nsmapces for intentions you can either choose
a service from autocomplete menus, or write any service name, existing
or not. We previous said this would be a 'Future' service, but it could
also be a service in another datacenter, or a 'virtual service'.
2. Reword the hints underneath the autocomplete menus to reflect point 1
* Create PopoverSelect component and styling
* Create CatalogToolbar component and Styling
* ui: Adds `selectable-key-values` helper (#7472)
Preferably we want all copy/text to live in the template. Whilst you can
achieve what we've done here with a combination of different helpers, as
we will be using this approach in various places it's probably best to
make a helper.
We also hit an ember bug related to using the `let` helper and trying to
access `thingThatWasLet.firstObject` (which can also be worked around
using `object-at`).
Moving everything to a helper 'sorted' everything.
Probably worthwhile noting that if the sort option themselves become
dynamic, I'm not sure if the helper here would actually react as you
would expect (I'm aware that ember helpers on react on the root
arguments, not necesarily sub properties of those arguments). If we get
to that point this helper could take the same approach as what I believe
ember-composable-helpers does to get around this, or move them to the
view controller. If we do ever moved this to the view controller, we
can still use the exported function from the new helper here to keep
using the same functionality and tests we have here.
* Create tests for sorting services with CatalogToolbar
* Add rule to print 'ember/no-global-jquery' as a warning
Co-authored-by: John Cowen <johncowen@users.noreply.github.com>
* Fix clickFirstAnchor bug
* Create Proxy Info Tab for Instance Detail Page
* Create tests for ProxyInfo and update other scenarios with Proxy data
* ui: Refactors our app-view/%app-view component (#7752)
Co-authored-by: John Cowen <johncowen@users.noreply.github.com>
* ui: Adds a tab selection animation to our app tabs
1. Replace all mentions of `magenta` with a themeable CSS property.
2. Add an easy way to inline style DOM nodes
3. Use CSS properties to add tab animation
* Fix up rendering test
* Avoid DOM noodling as much as possible
* Return all services except Proxies
* Add Gateway icon to the codebase
* Create and implement ConsulExternalSource component
* Fix tests to work with new mock data and add a Gateway test
* Update consul-api-double to 2.14.3
* ui: Use Datasource for loading related data in ACLs area
* ui: Use more manual cleanup for Controller event-sources
* Update reconcile to use nspace and add SyncTime to role/policy
* Use the correct value for nspace and dc (the one from the item itself)
* Remove the // check, we no longer need it. Add some TODO
* Remove Proxy link and add ExternalSource to instance detail page header
* Create HealthChecks tab with route and styling
* Fix up tests to fit redesign of Service Instances Detail page
* Make datacenter queries use query vs findAll like the rest of the app
* Make sure we have an element to pass to isInViewport
* Make sure href-mut doesn't error even if the currentRoute === null
* More post test cleanup and Safari fix (safari requires http:// URLs)
* Reverse order of datasource nspace/dc's and add a namespace source
* Rearrange routes/templates/controllers to only use HashicorpConsul once
* Add datasources and correct token namespace detection/redirection
* Remove old dc findAll adapter method
* Add more comments around the 'child route/parent controller' vars
* Create ConsulServiceInstanceList with styling and test
* Implement ConsulServiceInstanceList to Service Detail page
* Implement ConsulExternalSource to Services Show page header
* Update services/show page object
* Update the styling of CompositeRow
* Refactor ConsulServiceList component and styling
* Update ConsulExternalSource to say 'Registered via...'
* Upgrade consul-api-double to patch 2.14.1
* Fix up tests to not use Kind in service models
* Update ListCollection with clickFirstAnchor action
* Add $typo-size-450 to typography base variables
* Create ConsulExternalSource with test and styling
* Implement ConsulExternalSource to Service list page
* Update icons for redesign
* Refactor ListCollection and CompositeRow styling
* Create GridCollection for nodes page with styling
* Update ListCollection styling
* Update TagList styling
* Create CompositeRow styling component
* Update ConsulServiceList component with styling
* Create service health-checks helper
* Add InstanceCount to the service model
* Add tag-svg to codebase
* Create and update tests for service-list page
* Upgrade @hashicorp/consul-api-double to 2.14.0
* ui: Logout button
This commit adds an easier way to logout of the UI using a logout button
Notes:
- Added a Logout button to the main navigation when you are logged in,
meaning you have easy access to a way to log out of the UI.
- Changed all wording to use 'Log in/out' vocabulary instad of 'stop
using'.
- The logout button opens a panel to show you your current ACL
token and a logout button in order to logout.
- When using legacy ACLs we don't show the current ACL token as legacy
ACLs tokens only have secret values, whereas the new ACLs use a
non-secret ID plus a secret ID (that we don't show).
- We also added a new `<EmptyState />` component to use for all our
empty states. We currently only use this for the ACLs disabled screen to
provide more outgoing links to more readind material/documentation to
help you to understand and enable ACLs.
- The `<DataSink />` component is the sibling to our `<DataSource />`
component and whilst is much simpler (as it doesn't require polling
support), its tries to use the same code patterns for consistencies
sake.
- We had a fun problem with ember-data's `store.unloadAll` here, and in
the end went with `store.init` to empty the ember-data store instead due
to timing issues.
- We've tried to use already existing patterns in the Consul UI here
such as our preexisting `feedback` service, although these are likely to
change in the future. The thinking here is to add this feature with as
little change as possible.
Overall this is a precursor to a much larger piece of work centered on
auth in the UI. We figured this was a feature complete piece of work as
it is and thought it was worthwhile to PR as a feature on its own, which
also means the larger piece of work will be a smaller scoped PR also.
John Cowen
Kenia