Main Changes:
• method signature updates everywhere to account for passing around enterprise meta.
• populate the EnterpriseAuthorizerContext for all ACL related authorizations.
• ACL resource listings now operate like the catalog or kv listings in that the returned entries are filtered down to what the token is allowed to see. With Namespaces its no longer all or nothing.
• Modified the acl.Policy parsing to abstract away basic decoding so that enterprise can do it slightly differently. Also updated method signatures so that when parsing a policy it can take extra ent metadata to use during rules validation and policy creation.
Secondary Changes:
• Moved protobuf encoding functions out of the agentpb package to eliminate circular dependencies.
• Added custom JSON unmarshalers for a few ACL resource types (to support snake case and to get rid of mapstructure)
• AuthMethod validator cache is now an interface as these will be cached per-namespace for Consul Enterprise.
• Added checks for policy/role link existence at the RPC API so we don’t push the request through raft to have it fail internally.
• Forward ACL token delete request to the primary datacenter when the secondary DC doesn’t have the token.
• Added a bunch of ACL test helpers for inserting ACL resource test data.
Previously the logic for configuring RDS during LDS for L7 upstreams was
overapplied to TCP proxies resulting in a cluster name of <emptystring>
being used incorrectly.
Fixes#6621
If acls have not yet replicated to the secondary then authz requests
will be remotely resolved by the primary. Now these tests explicitly
wait until replication has caught up first.
* ACL Authorizer overhaul
To account for upcoming features every Authorization function can now take an extra *acl.EnterpriseAuthorizerContext. These are unused in OSS and will always be nil.
Additionally the acl package has received some thorough refactoring to enable all of the extra Consul Enterprise specific authorizations including moving sentinel enforcement into the stubbed structs. The Authorizer funcs now return an acl.EnforcementDecision instead of a boolean. This improves the overall interface as it makes multiple Authorizers easily chainable as they now indicate whether they had an authoritative decision or should use some other defaults. A ChainedAuthorizer was added to handle this Authorizer enforcement chain and will never itself return a non-authoritative decision.
* Include stub for extra enterprise rules in the global management policy
* Allow for an upgrade of the global-management policy
A check may be set to become passing/critical only if a specified number of successive
checks return passing/critical in a row. Status will stay identical as before until
the threshold is reached.
This feature is available for HTTP, TCP, gRPC, Docker & Monitor checks.
* Implement leader routine manager
Switch over the following to use it for go routine management:
• Config entry Replication
• ACL replication - tokens, policies, roles and legacy tokens
• ACL legacy token upgrade
• ACL token reaping
• Intention Replication
• Secondary CA Roots Watching
• CA Root Pruning
Also added the StopAll call into the Server Shutdown method to ensure all leader routines get killed off when shutting down.
This should be mostly unnecessary as `revokeLeadership` should manually stop each one but just in case we really want these to go away (eventually).
This only works so long as we use simplistic protobuf types. Constructs such as oneof or Any types that require type annotations for decoding properly will fail hard but that is by design. If/when we want to use any of that we will probably need to consider a v2 API.
* Add JSON and Binary Marshaler Generators for Protobuf Types
* Generate files with the correct version of gogo/protobuf
I have pinned the version in the makefile so when you run make tools you get the right version. This pulls the version out of go.mod so it should remain up to date.
The version at the time of this commit we are using is v1.2.1
* Fixup some shell output
* Update how we determine the version of gogo
This just greps the go.mod file instead of expecting the go mod cache to already be present
* Fixup vendoring and remove no longer needed json encoder functions
## HTTPAdapter (#5637)
## Ember upgrade 2.18 > 3.12 (#6448)
### Proxies can no longer get away with not calling _super
This means that we can't use create anymore to define dynamic methods.
Therefore we dynamically make 2 extended Proxies on demand, and then
create from those. Therefore we can call _super in the init method of
the extended Proxies.
### We aren't allowed to reset a service anymore
We never actually need to now anyway, this is a remnant of the refactor
from browser based confirmations. We fix it as simply as possible here
but will revisit and remove the old browser confirm functionality at a
later date
### Revert classes to use ES5 style to workaround babel transp. probs
Using a mixture of ES6 classes (and hence super) and arrow functions
means that when babel transpiles the arrow functions down to ES5, a
reference to this is moved before the call to super, hence causing a js
error.
Furthermore, we the testing environment no longer lets use use
apply/call on the constructor.
These errors only manifests during testing (only in the testing
environment), the application itself runs fine with no problems without
this change.
Using ES5 style class definitions give us freedom to do all of the above
without causing any errors, so we reverted these classes back to ES5
class definitions
### Skip test that seems to have changed due to a change in RSVP timing
This test tests a usecase/area of the API that will probably never ever
be used, it was more testing out the API. We've skipped the test for now
as this doesn't affect the application itself, but left a note to come
back here later to investigate further
### Remove enumerableContentDidChange
Initial testing looks like we don't need to call this function anymore,
the function no longer exists
### Rework Changeset.isSaving to take into account new ember APIs
Setting/hanging a computedProperty of an instantiated object no longer
works. Move to setting it on the prototype/class definition instead
### Change how we detect whether something requires listening
New ember API's have changed how you can detect whether something is a
computedProperty or not. It's not immediately clear if its even possible
now. Therefore we change how we detect whether something should be
listened to or not by just looking for presence of `addEventListener`
### Potentially temporary change of ci test scripts to ensure deps exist
All our tooling scripts run through a Makefile (for people familiar with
only using those), which then call yarn scripts which can be called
independently (for people familar with only using yarn).
The Makefile targets always check to make sure all the dependencies are
installed before running anything that requires them (building, testing
etc).
The CI scripts/targets didn't follow this same route and called the yarn
scripts directly (usually CI builds a cache of the dependencies first).
For some reason this cache isn't doing what it usually does, and it
looks as though, in CI, ember isn't installed.
This commit makes the CI scripts consistently use the same method as all
of the other tooling scripts (Makefile target > Install Deps if
required > call yarn script). This should install the dependencies if
for some reason the CI cache building doesn't complete/isn't successful.
Potentially this commit may be reverted if, the root of the problem is
elsewhere, although consistency is always good, so it might be a good
idea to leave this commit as is even if we need to debug and fix things
elsewhere.
### Make test-parallel consistent with the rest of the tooling scripts
As we are here making changes for CI purposes (making test-ci
consistent), we spotted that test-parallel is also inconsistent and also
the README manual instructions won't work without `ember` installed
globally.
This commit makes everything consistent and changes the manual
instructions to use the local ember instance that gets installed via
yarn
### Re-wrangle catchable to fit with new ember 3.12 APIs
In the upgrade from ember 3.8 > 3.12 the public interfaces for
ComputedProperties have changed slightly. `meta` is no longer a public
property of ComputedProperty but of a ComputedDecoratorImpl mixin
instead.
7e4ba1096e/packages/%40ember/-internals/metal/lib/computed.ts (L725)
There seems to be no way, by just using publically available
methods, to replicate this behaviour so that we can create our own
'ComputedProperty` factory via injecting the ComputedProperty class as
we did previously.
3f333bada1/ui-v2/app/utils/computed/factory.js (L1-L18)
Instead we dynamically hang our `Catchable` `catch` method off the
instantiated ComputedProperty. In doing it like this `ComputedProperty`
has already has its `meta` method mixed in so we don't have to manually
mix it in ourselves (which doesn't seem possible)
This functionality is only used during our work in trying to ensure
our EventSource/BlockingQuery work was as 'ember-like' as possible (i.e.
using the traditional Route.model hooks and ember-like Controller
properties). Our ongoing/upcoming work on a componentized approach to
data a.k.a `<DataSource />` means we will be able to remove the majority
of the code involved here now that it seems to be under an amount of
flux in ember.
### Build bindata_assetfs.go with new UI changes
* Add support for parameterizing the ACL config used with a TestAgent
Using tokens that are UUIDs will get rid of some warnings
* Refactor to allow setting all tokens and change the template to ignore unset values.
This fixes an issue where leaf certificates issued in secondary
datacenters would be reissued very frequently (every ~20 seconds)
because the logic meant to detect root rotation was errantly triggering
because a hash of the ultimate root (in the primary) was being compared
against a hash of the local intermediate root (in the secondary) and
always failing.
Fixes#6521
Ensure that initial failures to fetch an agent cache entry using the
notify API where the underlying RPC returns a synthetic index of 1
correctly recovers when those RPCs resume working.
The bug in the Cache.notifyBlockingQuery used to incorrectly "fix" the
index for the next query from 0 to 1 for all queries, when it should
have not done so for queries that errored.
Also fixed some things that made debugging difficult:
- config entry read/list endpoints send back QueryMeta headers
- xds event loops don't swallow the cache notification errors
In a previous PR I made it so that we had interfaces that would work enough to allow blockingQueries to work. However to complete this we need all fields to be settable and gettable.
Notes:
• If Go ever gets contracts/generics then we could get rid of all the Getters/Setters
• protoc / protoc-gen-gogo are going to generate all the getters for us.
• I copied all the getters/setters from the protobuf funcs into agent/structs/protobuf_compat.go
• Also added JSON marshaling funcs that use jsonpb for protobuf types.
Fixes: #5396
This PR adds a proxy configuration stanza called expose. These flags register
listeners in Connect sidecar proxies to allow requests to specific HTTP paths from outside of the node. This allows services to protect themselves by only
listening on the loopback interface, while still accepting traffic from non
Connect-enabled services.
Under expose there is a boolean checks flag that would automatically expose all
registered HTTP and gRPC check paths.
This stanza also accepts a paths list to expose individual paths. The primary
use case for this functionality would be to expose paths for third parties like
Prometheus or the kubelet.
Listeners for requests to exposed paths are be configured dynamically at run
time. Any time a proxy, or check can be registered, a listener can also be
created.
In this initial implementation requests to these paths are not
authenticated/encrypted.
Also:
* Finished threading replaceExistingChecks setting (from GH-4905)
through service manager.
* Respected the original configSource value that was used to register a
service or a check when restoring persisted data.
* Run several existing tests with and without central config enabled
(not exhaustive yet).
* Switch to ioutil.ReadFile for all types of agent persistence.
The fields in the certs are meant to hold the original binary
representation of this data, not some ascii-encoded version.
The only time we should be colon-hex-encoding fields is for display
purposes or marshaling through non-TLS mediums (like RPC).
This only affects vault versions >=1.1.1 because the prior code
accidentally relied upon a bug that was fixed in
https://github.com/hashicorp/vault/pull/6505
The existing tests should have caught this, but they were using a
vendored copy of vault version 0.10.3. This fixes the tests by running
an actual copy of vault instead of an in-process copy. This has the
added benefit of changing the dependency on vault to just vault/api.
Also update VaultProvider to use similar SetIntermediate validation code
as the ConsulProvider implementation.
* Add build system support for protobuf generation
This is done generically so that we don’t have to keep updating the makefile to add another proto generation.
Note: anything not in the vendor directory and with a .proto extension will be run through protoc if the corresponding namespace.pb.go file is not up to date.
If you want to rebuild just a single proto file you can do so with: make proto-rebuild PROTOFILES=<list of proto files to rebuild>
Providing the PROTOFILES var will override the default behavior of finding all the .proto files.
* Start adding types to the agent/proto package
These will be needed for some other work and are by no means comprehensive.
* Add ability to resolve/fixup the agentpb.ACLLinks structure in the state store.
* Use protobuf marshalling of raft requests instead of msgpack for protoc generated types.
This does not change any encoding of existing types.
* Removed structs package automatically encoding with protobuf marshalling
Instead the caller of raftApply that wants to opt-in to protobuf encoding will have to call `raftApplyProtobuf`
* Run update-vendor to fixup modules.txt
Nothing changed as far as dependencies go but the ordering of modules in that file depends on the time they are first seen and its not alphabetical.
* Rename some things and implement the structs.RPCInfo interface bits
agentpb.QueryOptions and agentpb.WriteRequest implement 3 of the 4 RPCInfo funcs and the new TargetDatacenter message type implements the fourth.
* Use the right encoding function.
* Renamed agent/proto package to agent/agentpb to prevent package name conflicts
* Update modules.txt to fix ordering
* Change blockingQuery to take in interfaces for the query options and meta
* Add %T to error output.
* Add/Update some comments
This should cut down on test flakiness.
Problems handled:
- If you had enough parallel test cases running, the former circular
approach to handling the port block could hand out the same port to
multiple cases before they each had a chance to bind them, leading to
one of the two tests to fail.
- The freeport library would allocate out of the ephemeral port range.
This has been corrected for Linux (which should cover CI).
- The library now waits until a formerly-in-use port is verified to be
free before putting it back into circulation.
In normal operations there is a read/write race related to request
QueryOptions fields. An example race:
WARNING: DATA RACE
Read at 0x00c000836950 by goroutine 30:
github.com/hashicorp/consul/agent/structs.(*ServiceConfigRequest).CacheInfo()
/go/src/github.com/hashicorp/consul/agent/structs/config_entry.go:506 +0x109
github.com/hashicorp/consul/agent/cache.(*Cache).getWithIndex()
/go/src/github.com/hashicorp/consul/agent/cache/cache.go:262 +0x5c
github.com/hashicorp/consul/agent/cache.(*Cache).notifyBlockingQuery()
/go/src/github.com/hashicorp/consul/agent/cache/watch.go:89 +0xd7
Previous write at 0x00c000836950 by goroutine 147:
github.com/hashicorp/consul/agent/cache-types.(*ResolvedServiceConfig).Fetch()
/go/src/github.com/hashicorp/consul/agent/cache-types/resolved_service_config.go:31 +0x219
github.com/hashicorp/consul/agent/cache.(*Cache).fetch.func1()
/go/src/github.com/hashicorp/consul/agent/cache/cache.go:495 +0x112
This patch does a lightweight copy of the request struct so that the
embedded QueryOptions fields that are mutated during Fetch() are scoped
to just that one RPC.
* Store primaries root in secondary after intermediate signature
This ensures that the intermediate exists within the CA root stored in raft and not just in the CA provider state. This has the very nice benefit of actually outputting the intermediate cert within the ca roots HTTP/RPC endpoints.
This change means that if signing the intermediate fails it will not set the root within raft. So far I have not come up with a reason why that is bad. The secondary CA roots watch will pull the root again and go through all the motions. So as soon as getting an intermediate CA works the root will get set.
* Make TestAgentAntiEntropy_Check_DeferSync less flaky
I am not sure this is the full fix but it seems to help for me.
When this test flakes sometimes this happens:
--- FAIL: TestCoordinate_Node (1.69s)
panic: interface conversion: interface {} is nil, not structs.Coordinates [recovered]
FAIL github.com/hashicorp/consul/agent 19.999s
Exit code: 1
panic: interface conversion: interface {} is nil, not structs.Coordinates [recovered]
panic: interface conversion: interface {} is nil, not structs.Coordinates
There is definitely a bug lurking, but the code seems to imply this can
only return nil on 404. The tests previously were not checking the
status code.
The underlying cause of the flake is unknown, but this should turn the
failure into a more normal test failure.
When there is an node name conflicts, such messages are displayed within Consul:
`consul.fsm: EnsureRegistration failed: failed inserting node: Error while renaming Node ID: "e1d456bc-f72d-98e5-ebb3-26ae80d785cf": Node name node001 is reserved by node 05f10209-1b9c-b90c-e3e2-059e64556d4a with name node001`
While it is easy to find the node that has reserved the name, it is hard to find
the node trying to aquire the name since it is not registered, because it
is not part of `consul members` output
This PR will display the IP of the offender and solve far more easily those issues.
The embedded `Server` field on a `DNSServer` is only set inside of the
`ListenAndServe` method. If that method fails for reasons like the
address being in use and is not bindable, then the `Server` field will
not be set and the overall `Agent.Start()` will fail.
This will trigger the inner loop of `TestAgent.Start()` to invoke
`ShutdownEndpoints` which will attempt to pretty print the DNS servers
using fields on that inner `Server` field. Because it was never set,
this causes a nil pointer dereference and crashes the test.
Previously `verify_incoming` was required when turning on `auto_encrypt.allow_tls`, but that doesn't work together with HTTPS UI in some scenarios. Adding `verify_incoming_rpc` to the allowed configurations.
AutoEncrypt needs the server-port because it wants to talk via RPC. Information from gossip might not be available at that point and thats why the server-port is being used.
- Bootstrap escape hatches are OK.
- Public listener/cluster escape hatches are OK.
- Upstream listener/cluster escape hatches are not supported.
If an unsupported escape hatch is configured and the discovery chain is
activated log a warning and act like it was not configured.
Fixes#6160
Compiling this will set an optional SNI field on each DiscoveryTarget.
When set this value should be used for TLS connections to the instances
of the target. If not set the default should be used.
Setting ExternalSNI will disable mesh gateway use for that target. It also
disables several service-resolver features that do not make sense for an
external service.
If the entry is updated for reasons other than protocol it is surprising
that the value is explicitly persisted as 'tcp' rather than leaving it
empty and letting it fall back dynamically on the proxy-defaults value.
Since generated envoy clusters all are named using (mostly) SNI syntax
we can have envoy read the various fields out of that structure and emit
it as stats labels to the various telemetry backends.
I changed the delimiter for the 'customization hash' from ':' to '~'
because ':' is always reencoded by envoy as '_' when generating metrics
keys.
Add parameter local-only to operator keyring list requests to force queries to only hit local servers (no WAN traffic).
HTTP API: GET /operator/keyring?local-only=true
CLI: consul keyring -list --local-only
Sending the local-only flag with any non-GET/list request will result in an error.
Failover is pushed entirely down to the data plane by creating envoy
clusters and putting each successive destination in a different load
assignment priority band. For example this shows that normally requests
go to 1.2.3.4:8080 but when that fails they go to 6.7.8.9:8080:
- name: foo
load_assignment:
cluster_name: foo
policy:
overprovisioning_factor: 100000
endpoints:
- priority: 0
lb_endpoints:
- endpoint:
address:
socket_address:
address: 1.2.3.4
port_value: 8080
- priority: 1
lb_endpoints:
- endpoint:
address:
socket_address:
address: 6.7.8.9
port_value: 8080
Mesh gateways route requests based solely on the SNI header tacked onto
the TLS layer. Envoy currently only lets you configure the outbound SNI
header at the cluster layer.
If you try to failover through a mesh gateway you ideally would
configure the SNI value per endpoint, but that's not possible in envoy
today.
This PR introduces a simpler way around the problem for now:
1. We identify any target of failover that will use mesh gateway mode local or
remote and then further isolate any resolver node in the compiled discovery
chain that has a failover destination set to one of those targets.
2. For each of these resolvers we will perform a small measurement of
comparative healths of the endpoints that come back from the health API for the
set of primary target and serial failover targets. We walk the list of targets
in order and if any endpoint is healthy we return that target, otherwise we
move on to the next target.
3. The CDS and EDS endpoints both perform the measurements in (2) for the
affected resolver nodes.
4. For CDS this measurement selects which TLS SNI field to use for the cluster
(note the cluster is always going to be named for the primary target)
5. For EDS this measurement selects which set of endpoints will populate the
cluster. Priority tiered failover is ignored.
One of the big downsides to this approach to failover is that the failover
detection and correction is going to be controlled by consul rather than
deferring that entirely to the data plane as with the prior version. This also
means that we are bound to only failover using official health signals and
cannot make use of data plane signals like outlier detection to affect
failover.
In this specific scenario the lack of data plane signals is ok because the
effectiveness is already muted by the fact that the ultimate destination
endpoints will have their data plane signals scrambled when they pass through
the mesh gateway wrapper anyway so we're not losing much.
Another related fix is that we now use the endpoint health from the
underlying service, not the health of the gateway (regardless of
failover mode).
In addition to exposing compilation over the API cleaned up the structures that would be exchanged to be cleaner and easier to support and understand.
Also removed ability to configure the envoy OverprovisioningFactor.
This should make them better for sending over RPC or the API.
Instead of a chain implemented explicitly like a linked list (nodes
holding pointers to other nodes) instead switch to a flat map of named
nodes with nodes linking other other nodes by name. The shipped
structure is just a map and a string to indicate which key to start
from.
Other changes:
* inline the compiler option InferDefaults as true
* introduce compiled target config to avoid needing to send back
additional maps of Resolvers; future target-specific compiled state
can go here
* move compiled MeshGateway out of the Resolver and into the
TargetConfig where it makes more sense.
* connect: reconcile how upstream configuration works with discovery chains
The following upstream config fields for connect sidecars sanely
integrate into discovery chain resolution:
- Destination Namespace/Datacenter: Compilation occurs locally but using
different default values for namespaces and datacenters. The xDS
clusters that are created are named as they normally would be.
- Mesh Gateway Mode (single upstream): If set this value overrides any
value computed for any resolver for the entire discovery chain. The xDS
clusters that are created may be named differently (see below).
- Mesh Gateway Mode (whole sidecar): If set this value overrides any
value computed for any resolver for the entire discovery chain. If this
is specifically overridden for a single upstream this value is ignored
in that case. The xDS clusters that are created may be named differently
(see below).
- Protocol (in opaque config): If set this value overrides the value
computed when evaluating the entire discovery chain. If the normal chain
would be TCP or if this override is set to TCP then the result is that
we explicitly disable L7 Routing and Splitting. The xDS clusters that
are created may be named differently (see below).
- Connect Timeout (in opaque config): If set this value overrides the
value for any resolver in the entire discovery chain. The xDS clusters
that are created may be named differently (see below).
If any of the above overrides affect the actual result of compiling the
discovery chain (i.e. "tcp" becomes "grpc" instead of being a no-op
override to "tcp") then the relevant parameters are hashed and provided
to the xDS layer as a prefix for use in naming the Clusters. This is to
ensure that if one Upstream discovery chain has no overrides and
tangentially needs a cluster named "api.default.XXX", and another
Upstream does have overrides for "api.default.XXX" that they won't
cross-pollinate against the operator's wishes.
Fixes#6159
* connect: validate upstreams and prevent duplicates
* Actually run Upstream.Validate() instead of ignoring it as dead code.
* Prevent two upstreams from declaring the same bind address and port.
It wouldn't work anyway.
* Prevent two upstreams from being declared that use the same
type+name+namespace+datacenter. Due to how the Upstream.Identity()
function worked this ended up mostly being enforced in xDS at use-time,
but it should be enforced more clearly at register-time.
Secondary CA initialization steps are:
• Wait until the primary will be capable of signing intermediate certs. We use serf metadata to check the versions of servers in the primary which avoids needing a token like the previous implementation that used RPCs. We require at least one alive server in the primary and the all alive servers meet the version requirement.
• Initialize the secondary CA by getting the primary to sign an intermediate
When a primary dc is configured, if no existing CA is initialized and for whatever reason we cannot initialize a secondary CA the secondary DC will remain without a CA. As soon as it can it will initialize the secondary CA by pulling the primaries roots and getting the primary to sign an intermediate.
This also fixes a segfault that can happen during leadership revocation. There was a spot in the secondaryCARootsWatch that was getting the CA Provider and executing methods on it without nil checking. Under normal circumstances it wont be nil but during leadership revocation it gets nil'ed out. Therefore there is a period of time between closing the stop chan and when the go routine is actually stopped where it could read a nil provider and cause a segfault.
Auto-encrypt meant to fallback to the default port when it wasn't provided, but it hadn't been because of an issue with the error handling. We were checking against an incomplete error value:
"missing port in address" vs "address $HOST: missing port in address"
Additionally, all RPCs to AutoEncrypt.Sign were using a.config.ServerPort, so those were updated to use ports resolved by resolveAddrs, if they are available.
* Allow setting the mesh gateway mode for an upstream in config files
* Add envoy integration test for mesh gateways
This necessitated many supporting changes in most of the other test cases.
Add remote mode mesh gateways integration test
The main change is that we no longer filter service instances by health,
preferring instead to render all results down into EDS endpoints in
envoy and merely label the endpoints as HEALTHY or UNHEALTHY.
When OnlyPassing is set to true we will force consul checks in a
'warning' state to render as UNHEALTHY in envoy.
Fixes#6171
* Display nicely Networks (CIDR) in runtime configuration
CIDR mask is displayed in binary in configuration.
This add support for nicely displaying CIDR in runtime configuration.
Currently, if a configuration contains the following lines:
"http_config": {
"allow_write_http_from": [
"127.0.0.0/8",
"::1/128"
]
}
A call to `/v1/agent/self?pretty` would display
"AllowWriteHTTPFrom": [
{
"IP": "127.0.0.0",
"Mask": "/wAAAA=="
},
{
"IP": "::1",
"Mask": "/////////////////////w=="
}
]
This PR fixes it and it will now display:
"AllowWriteHTTPFrom": [ "127.0.0.0/8", "::1/128" ]
* Added test for cidr nice rendering in `TestSanitize()`.
* Update go-bexpr to v0.1.1
This brings in:
• `in`/`not in` operators to do substring matching
• `matches` / `not matches` operators to perform regex string matching.
* Add the capability to auto-generate the filtering selector ops tables for our docs
This fixes pathological cases where the write throughput and snapshot size are both so large that more than 10k log entries are written in the time it takes to restore the snapshot from disk. In this case followers that restart can never catch up with leader replication again and enter a loop of constantly downloading a full snapshot and restoring it only to find that snapshot is already out of date and the leader has truncated its logs so a new snapshot is sent etc.
In general if you need to adjust this, you are probably abusing Consul for purposes outside its design envelope and should reconsider your usage to reduce data size and/or write volume.
All these changes should have no side-effects or change behavior:
- Use bytes.Buffer's String() instead of a conversion
- Use time.Since and time.Until where fitting
- Drop unnecessary returns and assignment
I can only assume we want to check for the retrieved `updatedToken` to not be
nil, before accessing it below.
`token` can't possibly be nil at this point, as we accessed `token.AccessorID`
just before.
* Ensure the mesh gateway configuration comes back in the api within each upstream
* Add a test for the MeshGatewayConfig in the ToAPI functions
* Ensure we don’t use gateways for dc local connections
* Update the svc kind index for deletions
* Replace the proxycfg.state cache with an interface for testing
Also start implementing proxycfg state testing.
* Update the state tests to verify some gateway watches for upstream-targets of a discovery chain.
Also:
- add back an internal http endpoint to dump a compiled discovery chain for debugging purposes
Before the CompiledDiscoveryChain.IsDefault() method would test:
- is this chain just one resolver step?
- is that resolver step just the default?
But what I forgot to test:
- is that resolver step for the same service that the chain represents?
This last point is important because if you configured just one config
entry:
kind = "service-resolver"
name = "web"
redirect {
service = "other"
}
and requested the chain for "web" you'd get back a **default** resolver
for "other". In the xDS code the IsDefault() method is used to
determine if this chain is "empty". If it is then we use the
pre-discovery-chain logic that just uses data embedded in the Upstream
object (and still lets the escape hatches function).
In the example above that means certain parts of the xDS code were going
to try referencing a cluster named "web..." despite the other parts of
the xDS code maintaining clusters named "other...".
Both 'consul config write' and server bootstrap config entries take a
decoding detour through mapstructure on the way from HCL to an actual
struct. They both may take in snake_case or CamelCase (for consistency)
so need very similar handling.
Unfortunately since they are operating on mirror universes of structs
(api.* vs structs.*) the code cannot be identitical, so try to share the
kind-configuration and duplicate the rest for now.
* Ensure we MapWalk the proxy config in the NodeService and ServiceNode structs
This gets rid of some json encoder errors in the catalog endpoints
* Allow passing explicit bind addresses to envoy
* Move map walking to the ConnectProxyConfig struct
Any place where this struct gets JSON encoded will benefit as opposed to having to implement it everywhere.
* Fail when a non-empty address is provided and not bindable
* camel case
* Update command/connect/envoy/envoy.go
Co-Authored-By: Paul Banks <banks@banksco.de>
* Retry the creation of the test server three times.
* Reduce the retry timeout for the API wait to 2 seconds, opting to fail faster and start over.
* Remove wait for leader from server creation. This wait can be added on a test by test basis now that the function is being exported.
* Remove wait for anti-entropy sync. This is built into the existing WaitForSerfCheck func, so that can be used if the anti-entropy wait is needed
Previously a sequence of events like:
Start
Stop
Start
Stop
would segfault on the second stop because the original ctx and cancel func were only initialized during the constructor and not during Start.
* Make cluster names SNI always
* Update some tests
* Ensure we check for prepared query types
* Use sni for route cluster names
* Proper mesh gateway mode defaulting when the discovery chain is used
* Ignore service splits from PatchSliceOfMaps
* Update some xds golden files for proper test output
* Allow for grpc/http listeners/cluster configs with the disco chain
* Update stats expectation
* connect: allow overriding envoy listener bind_address
* Update agent/xds/config.go
Co-Authored-By: Kyle Havlovitz <kylehav@gmail.com>
* connect: allow overriding envoy listener bind_port
* envoy: support unix sockets for grpc in bootstrap
Add AgentSocket BootstrapTplArgs which if set overrides the AgentAddress
and AgentPort to generate a bootstrap which points Envoy to a unix
socket file instead of an ip:port.
* Add a test for passing the consul addr as a unix socket
* Fix config formatting for envoy bootstrap tests
* Fix listeners test cases for bind addr/port
* Update website/source/docs/connect/proxies/envoy.md
maxIndexWatchTxn was only watching the IndexEntry of the max index of all the entries. It needed to watch all of them regardless of which was the max.
Also plumbed the query source through in the proxy config to help better track requests.
The clusters/endpoints test were still relying on deterministic ordering of clusters/endpoints which cannot be relied upon due to golang purposefully not providing any guarantee about consistent interation ordering of maps.
Also fixed a small bug in the connect proxy cluster generation that was causing the clusters slice to be double the size it needed to with the first half being all nil pointers.
* Fix some tests that I broke when refactoring the ConfigSnapshot
* Make sure the MeshGateway config is added to all the right api structs
* Fix some more tests
The general problem was that a the CA config which contained the trust domain was happening outside of the blocking mechanism so if the client started the blocking query before the primary dcs roots had been set then a state trust domain was being pushed down.
This was fixed here but in the future we should probably fixup the CA initialization code to not initialize the CA config twice when it doesn’t need to.
* Prune Servers from WAN and LAN
* cleaned up and fixed LAN to WAN
* moving things around
* force-leave remove from serfWAN, create pruneSerfWAN
* removed serfWAN remove, reduced complexity, fixed comments
* add another place to remove from serfWAN
* add nil check
* Update agent/consul/server.go
Co-Authored-By: Paul Banks <banks@banksco.de>
With this you should be able to fetch all of the relevant discovery
chain config entries from the state store in one query and then feed
them into the compiler outside of a transaction.
There are a lot of TODOs scattered through here, but they're mostly
around handling fun edge cases and can be deferred until more of the
plumbing works completely.
With ACLs enabled if an agent is wiped and restarted without a leave
it can no longer deregister the services it had previously registered
because it no longer has the tokens the services were registered with.
To remedy that we allow service deregistration from tokens with node
write permission.
* Add ui-content-path flag
* tests complete, regex validator on string, index.html updated
* cleaning up debugging stuff
* ui: Enable ember environment configuration to be set via the go binary at runtime (#5934)
* ui: Only inject {{.ContentPath}} if we are makeing a prod build...
...otherwise we just use the current rootURL
This gets injected into a <base /> node which solves the assets path
problem but not the ember problem
* ui: Pull out the <base href=""> value and inject it into ember env
See previous commit:
The <base href=""> value is 'sometimes' injected from go at index
serve time. We pass this value down to ember by overwriting the ember
config that is injected via a <meta> tag. This has to be done before
ember bootup.
Sometimes (during testing and development, basically not production)
this is injected with the already existing value, in which case this
essentially changes nothing.
The code here is slightly abstracted away from our specific usage to
make it easier for anyone else to use, and also make sure we can cope
with using this same method to pass variables down from the CLI through
to ember in the future.
* ui: We can't use <base /> move everything to javascript (#5941)
Unfortuantely we can't seem to be able to use <base> and rootURL
together as URL paths will get doubled up (`ui/ui/`).
This moves all the things that we need to interpolate with .ContentPath
to the `startup` javascript so we can conditionally print out
`{{.ContentPath}}` in lots of places (now we can't use base)
* fixed when we serve index.html
* ui: For writing a ContentPath, we also need to cope with testing... (#5945)
...and potentially more environments
Testing has more additional things in a separate index.html in `tests/`
This make the entire thing a little saner and uses just javascriopt
template literals instead of a pseudo handbrake synatx for our
templating of these files.
Intead of just templating the entire file this way, we still only
template `{{content-for 'head'}}` and `{{content-for 'body'}}`
in this way to ensure we support other plugins/addons
* build: Loosen up the regex for retrieving the CONSUL_VERSION (#5946)
* build: Loosen up the regex for retrieving the CONSUL_VERSION
1. Previously the `sed` replacement was searching for the CONSUL_VERSION
comment at the start of a line, it no longer does this to allow for
indentation.
2. Both `grep` and `sed` where looking for the omment at the end of the
line. We've removed this restriction here. We don't need to remove it
right now, but if we ever put the comment followed by something here the
searching would break.
3. Added `xargs` for trimming the resulting version string. We aren't
using this already in the rest of the scripts, but we are pretty sure
this is available on most systems.
* ui: Fix erroneous variable, and also force an ember cache clean on build
1. We referenced a variable incorrectly here, this fixes that.
2. We also made sure that every `make` target clears ember's `tmp` cache
to ensure that its not using any caches that have since been edited
everytime we call a `make` target.
* added docs, fixed encoding
* fixed go fmt
* Update agent/config/config.go
Co-Authored-By: R.B. Boyer <public@richardboyer.net>
* Completed Suggestions
* run gofmt on http.go
* fix testsanitize
* fix fullconfig/hcl by setting correct 'want'
* ran gofmt on agent/config/runtime_test.go
* Update website/source/docs/agent/options.html.md
Co-Authored-By: Hans Hasselberg <me@hans.io>
* Update website/source/docs/agent/options.html.md
Co-Authored-By: kaitlincarter-hc <43049322+kaitlincarter-hc@users.noreply.github.com>
* remove contentpath from redirectFS struct
* Support for maximum size for Output of checks
This PR allows users to limit the size of output produced by checks at the agent
and check level.
When set at the agent level, it will limit the output for all checks monitored
by the agent.
When set at the check level, it can override the agent max for a specific check but
only if it is lower than the agent max.
Default value is 4k, and input must be at least 1.
If a KVSet is performed but does not update the entry, do not trigger
watches for this key.
This avoids releasing blocking queries for KV values that did not
actually changed.
Read requests performed during anti antropy full sync currently target
the leader only. This generates a non-negligible load on the leader when
the DC is large enough and can be offloaded to the followers following
the "eventually consistent" policy for the agent state.
We switch the AE read calls to use stale requests with a small (2s)
MaxStaleDuration value and make sure we do not read too fast after a
write.
Matt Keeler
Sarah Adams
rerorero
R.B. Boyer
Freddy
Paul Banks
PHBourquin
Sarah Christoff
Hans Hasselberg
John Cowen
hashicorp-ci
Pierre Souchay
Aestek
Alvin Huang
tradel
Mike Morris
Todd Radel
freddygv
Jack Pearkes
Jeff Mitchell
Alvin Huang
Christian Muehlhaeuser
javicrespo
Michael Schurter
Matt Keeler
Aestek
Akshay Ganeshen