When connect is disabled the discovery-chain endpoint returns a 500
error status, which we previoulsy did not gracefully cope with.
This commit gracefully copes with any errors from the disco-chain
endpoint by supressing the error and hiding the Routing tab from the
Service detail page.
Acceptance test included
* ui: Ensure we use nonEmptySet everywhere where we add Namespace
We missed a coupld of places where we use the noEmptySet function, which
will only perform the set if the specified property is non-empty.
Currently we aren't certain there is a place in OSS where a Namespace
can make its way down via the API and endup being PUT/POSTed back out
again when saved. If this did ever happen we would assume it would be
the default namespace, but we add an extra check here to ensure we never
PUT/POST the Namespace property if Namespaces are disabled.
* ui: Add step/assertion for assert if a property is NOT set in the body
* ui: Improve updated/create acc testing for policy/token/roles:
Including making sure a Namespace property is never sent through if you
are running without namespace support
* ui: Make API integration tests aware of CONSUL_NSPACES_ENABLED
* ui: Allow passing CONSUL_NSPACES_ENABLED in via the cli in ember
* ui: Add more makefile targets/package scripts to switch NSPACEs on/off
* ui: Ensure all acceptance tests continue to pass with NSPACEs on/off
This required a little tweaking of the dictionary, at some point
page-navigation and some of these little tweaks will no longer be
required
* ui: Try running CI frontend tests in two parellel runs oss/ent
* ui: Use correct make target, use different names for the reports
We noticed that this relative positioning is not even applied when the CSS is
compiled/compressed. When looking via Web Inspector this style/selector
doesn't even appear even though it is in the CSS source.
This !important reduces the amount of selectors for this style rule,
which fixes the error, so potentially this isn't a specificity thing.
* ui: remove the default word when describing routes
* ui: Avoid mutating the chain and look for the default edges more safely
* ui: Use not null check instead of a truthy check for showing disco-chain
* ui: Upgrade consul-api-double for better disco-chain mocks/fixtures
* ui: always pass KV flags through on update
* ui: Integration test to prove the flags queryParams gets passed through
* ui: Add Flags to the KV updating acceptance tests
* Update search field placeholder to display `Search`
* Add an acceptance test to search node listings with node name and IP Address
* Update and add unit tests for filter/search node listing with IP Address
* Adds conditional in route to not make discovery-chain request if service kind is equal to `connect-proxy` or `mesh-gateway`
* Adds conditional in template to not show Routing tab if `chain` returns as null
* Creates a new acceptance test to test the Routing tab not being displayed for a service proxy
* Adds `tabs` to the services/show page object
* Adds an acceptance test for hiding Blocking Queries
* Creates a new scenario - If a user adds CONSUL_UI_DISABLE_REALTIME to localStorage, the Blocking Queries section is hidden.
* Updates page assertion to accept functions and booleans as properties
* ui: Fix "don't see" step to watch for the different pageObject error
ember-cli-page object seems to throw a an error with a different message
depending on how you call a function:
currentPage()[property]() // message = 'Element not found'
const prop = currentPage()[property];
prop() // message = 'Something about destructuring'
This changes the step/test/assertion to ensure we check for both types of errors
Co-authored-by: John Cowen <johncowen@users.noreply.github.com>
* ui: Move CI to use the Makefile for testing (+ tmporary removal of exam)
* ui: make a specific test-ci target as we are using --path dist
--path dist looks for a previous build to test against, in CI this
exists as we run a build first, but locally potentially this dist folder
doesn't
* ui: Fix typo expanded > ariaExpanded
* ui: Add the things we need to test this
* ui: Add tests for testing the menu closes when clicked
* ui: Ensure the aria-menu closes on route change
Previous to 1.7 splitter names didn't include the namespace name
i.e. 'service-name'
as of 1.7 they now include the namespace
i.e. 'service-name.namespace'
This commit take account of that
* ui: Discovery-Chain: Cope with redirects that have failovers
We found a few stranger configurations for discovery-chain, one of which
was redirects that can then failover.
We altered the parsing here to include 2 passes, one to organize the
nodes into resolvers and children/subsets based on the nodes themselves, which
includes adding the failovers to resolvers and subsets.
We then do a second pass which can more reliably figure out whether a
target is a redirect or a failover (target failovers don't have a
corresponding node), this then adds the redirect children to the already
exising resolver (from the first pass) and then checks if the redirect
also has failovers and adds those if so.
* ui: Check to see if we have a user configured default route or not
...if we don't add one so the visualization looks complete
* ui: Enable blocking queries/live updates for intentions
* ui: Add acceptance tests for intention blocking queries
* ui: Add copy to explain that intentions are also now 'real time'
In an ember environment `config/environment.js` exports a JSON object
whereas the file itself exports a function that receives a string of the
environment name that would like returning.
This is so ember can automatically provide you with an already
configured object containing configuration values dependent on which
environment you passed to `ember-cli` using `serve`, `build` or `test`.
In order to bypass this so we can easily test what is returned for
different environments, we've installed a lightweight functional test
harness that is simple to use `substack/tape`, that can be run easily
outside of ember.
We've then written as simple test case using this to enable us to
test/assert that different environments return the correct configuration
values.
Additionally we've added some yarn scripts/make targets (yarn run
test-node / make test-node) to make this easy to run. We're yet to
integrate this into CI.
When editing Nspaces, although you can assign policies to a nspace using
PolicyDefaults you cannot assign a Service Identity to a policy like you
can when adding a policy to a token.
This commit adds an extra attribute to our policy-form/policy-selector
component so you can disable this setting. At a later date we may change
this to have a conficgurable `<Slot />` instead.
Simple acceptance tests is included here
* ui: Acceptance test improvements to prepare for more NS tests
* ui: Namespace acceptance testing (#7005)
* Update api-double and consul-api-double for http.body
* Adds places where we missed passing the nspace through
* Hardcode nspace CRUD to use the default nspace for policies and roles
* Alter test helpers to allow us to control nspaces from the outside
* Amends to allow tests to account for namespace, move ns from queryParam
1. We decided to move how we pass the namespace value through to the
backend when performing write actions (create, update). Previoulsy we
were using the queryParam although using the post body is the preferred
method to send the Namespace details through to the backend.
2. Other various amends to take into account testing across multiple
namespaced scenarios
* Enable nspace testing by default
* Remove last few occurances of old style http assertions
We had informally 'deprecated' our old style of http assertions that
relied on the order of http calls (even though that order was not
important for the assertion). Following on from our namespace work we
removed the majority of the old occrances of these old style assertions.
This commit removes the remaining few, and also then cleans up the
assertions/http.js file to only include the ones we are using.
This reduces our available step count further and prevents any confusion
over the usage of the old types and the new types.
* ui: Namespace CRUD acceptance tests (#7016)
* Upgrade consul-api-double
* Add all the things required for testing:
1. edit and index page objects
2. enable CONSUL_NSPACE_COUNT cookie setting
3. enable mutating HTTP response bodies based on URL
* Add acceptance test for nspace edit/delete/list and searching
* ui: Change action-group to use new popup-menu component in intentions
* ui: Slight amends to aria-menu to prevent scrolling
* ui: Begin to use aria-menu/popover-menu for other elements
* Use a simpler, hackier method to fix up zIndexing
* ui: Implement new confirmation dialogs in other list views (#7080)
This includes another amend to the popover-menu in order to allow
mutiple confirmations/subpanels in the same popover menu.
The functionality added here to allow this is likely to change in the
future.
* Reorganize resolvers so its clearer what's happening
* Use entire route definition for id
* Clean up a tiny bit more, use guid for ids instead of JSON
* ui: Externalize disco-chain utils and add initial unit testing
* Add some click outside-ness for de-highlighting things
* ui: Delete a bunch of CSS that we recently moved elsewhere
* ui: Add some masking placeholders
* Switch out hashicorp logo for one from structure-icons
* Change copy-button to use new copy-action icon
* Change secret-button to use new visibility-hide/show icons
* New folder icon for KVs
* Cleanup some of the icons we no longer use
* Switch from %with-exit to standard-like %with-exit-icon
* Move all chevrons to use structure-icons properly
* Use star-fill as much as possible
* Remove the remaining icons from icons/index plus the file itself
* Change all instances of yield/block-slots to use attributes over positional arguments
* Remove the ability to use yield/block-slots with positional params
* Remove empty init
* Actually make the disco chain endpoint send the nspace, note:
The backend doesn't support this as yet.
* Tweak the font size of flash-messages ever so slightly
* Make sure the nspace menu is kept up to date when creating a new one
* Move comment to the correct place
* Only refresh the namespace menu if you specifically created a nspace
* Change FIXMEs to TODOs as we are happy for these to wait until later
* Add data layer for discovery chain (model/adapter/serializer/repo)
* Add routing plus template for routing tab
* Add extra deps - consul-api-double upgrade plus ngraph for graphing
* Add discovery-chain and related components and helpers:
1. discovery-chain to orchestrate/view controller
2. route-card, splitter-card, resolver card to represent the 3 different
node types.
3. route-match helper for easy formatting of route rules
4. dom-position to figure out where things are in order to draw lines
5. svg-curve, simple wrapper around svg's <path d=""> attribute format.
6. data-structs service. This isn't super required but we are using
other data-structures provided by other third party npm modules in other
yet to be merged PRs. All of these types of things will live here for
easy access/injection/changability
7. Some additions to our css-var 'polyfill' for a couple of extra needed
rules
* Related CSS for discovery chain
1. We add a %card base component here, eventually this will go into our
base folder and %stats-card will also use it for a base component.
2. New icon for failovers
* ui: Discovery Chain Continued (#6939)
1. Add in the things we use for the animations
2 Use IntersectionObserver so we know when the tab is visible,
otherwise the dom-position helper won't work as the dom elements don't
have any display.
3. Add some base work for animations and use them a little
4. Try to detect if a resolver is a redirect. Right now this works for
datacenters and namespaces, but it can't work for services and subsets -
we are awaiting backend support for doing this properly.
5. Add a fake 'this service has no routes' route that says 'Default'
6. redirect icon
7. Add CSS.escape polyfill for Edge
Adds namespace support to the UI:
1. Namespace CRUD/management
2. Show Namespace in relevant areas (intentions, upstreams)
3. Main navigation bar improvements
4. Logic/integration to interact with a new `internal/acl/authorize` endpoint
We've had a set of %placeholders in our base styles for quite a while
but not butten the bullet to use them. This begins to use them.
We had to make a small amount of tweaks to base whilst doing this, but
its as we'd prefer there to be as few font placeholders as possible. We
might/should be able to reduce these further at somepoint, or
potentially rename them. We currently have six header fonts (or 4 header
fonts/2 strong body fonts) and 3 body fonts.
We also noticed an empty CSS file and deleted that while we were here.
We also noticed that the bottom border of structure tabs was a pixel
larger than ours so we tweaked that here also.
Adds visibility for `Expose.Checks` config setting for proxies.
1. Adds an 'Exposed Path' tab to the proxy detail page to show the user information on exposed paths.
2. If the users has exposed their healthchecks we also add this information to the Service detail page for this proxy (only for http2 and gRPC checks)
This includes an update of our CSS npm module. The majority of this is
just moving files from one folder to another.
1. %breadrumbs: As well as moving we've added 'milestone' breadcrumbs
2. %checkbox-group: Moved
3. %radio-group: Moved
4. %sliding-toggle: Moved (used to be called just %toggle)
5. %form-elements: Moved and added a new %inline-alert for form field
messaging (see Structure design system)
6. %action-group is now a composition of %menu-panel, %toggle-button,
plus edits to existing style to bring the %action-groups inline with the
dropdowns from Structure). %action-group also includes a composed
%confirmation-alert that is yet to be include. This will be compiled out
until we integrate it.
We've also removed some of our old icon placeholders as the above
work seased to use some of them.
Now we done this I'd say all in all over half of our CSS components now
use the CSS npm module.
The CSS specific to Consul UI also uses much of this CSS module by way
of helper placeholders such as our %frames.
* ui: Adds ember-data blueprints for Consul specific HTTP adapter etc
These are currently quite Consul specific, but we also overwrite the
default model-test blueprint to keep the names consistent (dasherized)
for easy test filtering.
```
ember generate [adapter|serializer|model|repository|route] <name>
```
Pretty soon we would like to move to XML/Angle Bracket style
components. As they are XML-y it means you can't use positional
parameters anymore (every 'argument' for the component requires it to
use an XML-like attribute).
This adds a `name=""` attribute to both block-slot and yield-slot
components so we can use attributes to specify the name. We prefer using
attributes from now on, whilst the positional parameter is still
available yet deprecated so we can move over at whatever speed fits.
We also did the same with the block params positional parameter.
As a final note this entire in repo addon is a fork of
`ember-block-slots`
* ui: Adds some express middleware, removes need to run api dev server
@hashicorp/api-double comes with a basic express based server to run the
API double. This uses the express based server that ember-cli includes
and uses to run your app instead.
Eventually this will be moved to the @hashicorp/ember-cli-api-double
addon instead.
* Adds `make start-consul` to ease running a dev UI against Consul itself
* ui: Upgrade tooling to node 10 now we are on a more recent ember
* build: Also update the conatiner for building the UI
We bump alpine here as 3.8 doesn't have node 10 by default whereas 3.9
does. Yarn is bumped to latest current version while we are here.
## HTTPAdapter (#5637)
## Ember upgrade 2.18 > 3.12 (#6448)
### Proxies can no longer get away with not calling _super
This means that we can't use create anymore to define dynamic methods.
Therefore we dynamically make 2 extended Proxies on demand, and then
create from those. Therefore we can call _super in the init method of
the extended Proxies.
### We aren't allowed to reset a service anymore
We never actually need to now anyway, this is a remnant of the refactor
from browser based confirmations. We fix it as simply as possible here
but will revisit and remove the old browser confirm functionality at a
later date
### Revert classes to use ES5 style to workaround babel transp. probs
Using a mixture of ES6 classes (and hence super) and arrow functions
means that when babel transpiles the arrow functions down to ES5, a
reference to this is moved before the call to super, hence causing a js
error.
Furthermore, we the testing environment no longer lets use use
apply/call on the constructor.
These errors only manifests during testing (only in the testing
environment), the application itself runs fine with no problems without
this change.
Using ES5 style class definitions give us freedom to do all of the above
without causing any errors, so we reverted these classes back to ES5
class definitions
### Skip test that seems to have changed due to a change in RSVP timing
This test tests a usecase/area of the API that will probably never ever
be used, it was more testing out the API. We've skipped the test for now
as this doesn't affect the application itself, but left a note to come
back here later to investigate further
### Remove enumerableContentDidChange
Initial testing looks like we don't need to call this function anymore,
the function no longer exists
### Rework Changeset.isSaving to take into account new ember APIs
Setting/hanging a computedProperty of an instantiated object no longer
works. Move to setting it on the prototype/class definition instead
### Change how we detect whether something requires listening
New ember API's have changed how you can detect whether something is a
computedProperty or not. It's not immediately clear if its even possible
now. Therefore we change how we detect whether something should be
listened to or not by just looking for presence of `addEventListener`
### Potentially temporary change of ci test scripts to ensure deps exist
All our tooling scripts run through a Makefile (for people familiar with
only using those), which then call yarn scripts which can be called
independently (for people familar with only using yarn).
The Makefile targets always check to make sure all the dependencies are
installed before running anything that requires them (building, testing
etc).
The CI scripts/targets didn't follow this same route and called the yarn
scripts directly (usually CI builds a cache of the dependencies first).
For some reason this cache isn't doing what it usually does, and it
looks as though, in CI, ember isn't installed.
This commit makes the CI scripts consistently use the same method as all
of the other tooling scripts (Makefile target > Install Deps if
required > call yarn script). This should install the dependencies if
for some reason the CI cache building doesn't complete/isn't successful.
Potentially this commit may be reverted if, the root of the problem is
elsewhere, although consistency is always good, so it might be a good
idea to leave this commit as is even if we need to debug and fix things
elsewhere.
### Make test-parallel consistent with the rest of the tooling scripts
As we are here making changes for CI purposes (making test-ci
consistent), we spotted that test-parallel is also inconsistent and also
the README manual instructions won't work without `ember` installed
globally.
This commit makes everything consistent and changes the manual
instructions to use the local ember instance that gets installed via
yarn
### Re-wrangle catchable to fit with new ember 3.12 APIs
In the upgrade from ember 3.8 > 3.12 the public interfaces for
ComputedProperties have changed slightly. `meta` is no longer a public
property of ComputedProperty but of a ComputedDecoratorImpl mixin
instead.
7e4ba1096e/packages/%40ember/-internals/metal/lib/computed.ts (L725)
There seems to be no way, by just using publically available
methods, to replicate this behaviour so that we can create our own
'ComputedProperty` factory via injecting the ComputedProperty class as
we did previously.
3f333bada1/ui-v2/app/utils/computed/factory.js (L1-L18)
Instead we dynamically hang our `Catchable` `catch` method off the
instantiated ComputedProperty. In doing it like this `ComputedProperty`
has already has its `meta` method mixed in so we don't have to manually
mix it in ourselves (which doesn't seem possible)
This functionality is only used during our work in trying to ensure
our EventSource/BlockingQuery work was as 'ember-like' as possible (i.e.
using the traditional Route.model hooks and ember-like Controller
properties). Our ongoing/upcoming work on a componentized approach to
data a.k.a `<DataSource />` means we will be able to remove the majority
of the code involved here now that it seems to be under an amount of
flux in ember.
### Build bindata_assetfs.go with new UI changes
The `Type` column used for giving details on what type of a service each
item is was removed in https://github.com/hashicorp/consul/pull/6075.
As a result of keeping long running branches in sync, this change was
partly reverted in an earlier PR (the type header was re-added)
https://github.com/hashicorp/consul/pull/5913 following a rebase.
This commit re-removes the `Type` table header (the `<th>`)
- yarn upgrade consul-api-double which includes `status/leader`
- add all the ember-data things required to call a new endpoint
- Pass the new leader variable through to the template
- use the new leader variable in the template to set a leader
- add acceptance testing to verify leaders are highlighted
- Change testing navigation/api requests to status/leader (on the node listing page, status/leader is now the last get request to
be called).
- Template whitespace commit (less indenting)
- adds a test to to assert no errors happen with an unelected leader
-Enable blocking queries by default
-Change assertion to check for the last PUT request, not just any request for session destruction from a node page.
Since we've now turned on blocking queries by default this means that a
second GET request is made after the PUT request that we are asserting
for but before the assertion itself, this meant the assertion failed. We
double checked this by turning off blocking queries for this test using
```
And settings from yaml
---
consul:client:
blocking: 0
---
```
which made the test pass again.
As moving forwards blocking queries will be on by default, we didn't
want to disable blocking queries for this test, so we now assert the
last PUT request specifically. This means we continue to assert that the
session has been destroyed but means we don't get into problems of
ordering of requests here
ember-cli-api-double has been upgraded for 3 things:
1. Use the correct configuration flags
2. Automatically include the necessary files to enable the api doubles
without requiring a server. This can be disabled to provide custom
functionality (so we can stitch our BDD style testing in with this)
3. When used statically, read the cookies from the users browser to
enable basic ad-hoc double editing (e.g. CONSUL_SERVICE_COUNT=100000)
Once upgraded we've now moved the config to the correct place, added a
new environment (staging) to use the static-style of doubles
The test environment continues to use custom cookie setting and url
checking so we disable this 'auto importing' by setting 'auto-import' to
false for the configuration for the addon.
We also added a couple of new package script targets to explicitly serve
or build the UI with the entirely static UI.
1. Rebuild the heathchecked-resource component now we can copy and paste
2. As the above rebuild came with new icons, we also swapped out 'most'
of the other areas where we were using these new icons, plus any icons
that were effected by the new icon placeholders
3. Begin to remove more and more of the project specific icons (now
replaced by the shared ones)
We'd rather 'play it safe' for our selection detection (which avoids
following links if you have some text selected). This commit adds an
additional check of 'more than 1 character' to the 'isSelected' check.
This is based on the fact that it's far quicker to type the character so
why would a user select on character? This therefore caters for any
fairly large (in the scheme of things) incidential mouse moves whilst
clicking a link.
Overall this is probably overkill
1. Re-focus the input element on phrase removal
2. Move all actions to `actions:`
3. Move to a form looking `value` rather than `items`
4. Move placeholder functionalit yinto the component
5. Force DDAU instead of two way binding with `slice` and `onchange`
6. Begin to deprecate the `searchable` interface
1. EventSources now pass themselves thorugh to the run function as a
second argument. This enables the use of arrow functions along with the
EventSources API
`(configuration, source) => source.close()`. Order of arguments could
potentially be switched at a later date.
2. BlockingEventSources now let you pass an 'event' through at
instantation time. If you do this, the event will immediately be dispatched
once the EventSource is opened. The usecase for this is for 'unfreezing' cached
BlockingEvents. This makes it easier to provide a cache for
BlockingEventSources by caching its data rather than the entire
BlockingEventSource itself.
```
new BlockingEventSource(
(config, source) => { /* something */ },
{
cursor: 1024, // this would also come from a cache
currentEvent: getFromSomeSortOfCache(eventSourceId) //this is the new bit
}
);
// more realistically
new BlockingEventSource(
(config, source) => { return data.findSomething(slug, config) },
getFromSomeSortOfCache(eventSourceId)
);
```
Makes listening to multiple events on one target slightly easier.
Adding events can be rolled up into passing through an object, and the
returned remove function removes all of the handlers in the object
For example:
```
//this.listen...
const remove = listeners.add(
{
'message': handler,
'error': handler
}
);
remove(); // removes all listeners in the object
```
The entire API for listeners is now becoming slightly overloaded, so
potentially we'd use this API always and remove the ability to use a
string/function pair.
Throughout the app we mutate the value of the root node classList on
navigation between separate pages (basically on URL change).
Every template has a unique classList for example `template-service
template-show` and `template-service template-list` etc etc.
When navigating between 2 pages, both pages using the same template yet
with different data, previoulsy we would entirely clear out the
`html.classList` and then refill it again with eaxctly the same classes.
This commit moves this to perform a diff previous to mutating the
classList, and then potentially no classList mutating is needed when
moving between 2 pages of the same template.
You can potentially close an EventSource before its first tick by
immediately setting the readyState to a non-open state. Therefore it
never opens.
Calling `open` will then open it.
'Open' fits better than 'reopen' when taking the above into account
Currently these gherkin dictionaries are contained in
`ember-cli-api-double`, which isn't the correct place for them.
They belong with the steps themselves.
This is also less complicated now we can require/import javascript
using a standard approach
Also runs an update of `ember-cli-api-double` which will be the last
installation of version 1 of this module.
Migrate roughly half of the base components into base
Adds a target for easily formatting CSS
Further CSS amends/migration (#5921)
1. tooltips within tables where a slightly bit troublesome due to a mix
of `inline-flex`, `overflow` and the need for truncation. This refineds
tooltips a slight bit more to work 'everywhere'.
2. We also move tooltip to use the correct color and min-width from
structure, but we overwrite the min-width here until we get confirmation
on widths/alignment of text within a tooltip.
3. Tiny fixes for breadcrumbs and toggle-buttons in tabular listings
4. Now we inline-flex our table cells, it means it is impossible to
truncate text without wrapping it in another element. This wraps all
Description like text in `<p>` tags. Generally the first column of text
is already wrapped in an `<a>` tag. Other items such as consul tags and
policy names etc get 'cutoff' rather than truncated.
5. We are now using all the icons from `@hashicorp/structure-icons`
EventSources will wait for 1 tick before 'opening'. There is always the
chance that the EventSource is '.close()'ed before that tick. We
therefore check the 'readyState' before opening the EventSource
* ui: Allow text selection of clickable elements and their contents
This commit disables a click on mousedown be removing the `href`
attribute and moving it to a `data-href` attribute. On mouseup it will
only move it back if there is no selection. This means that an anchor
will only be followed on click _if_ there is no selection.
This fixes the fact that whenever you select some copy within a
clickable element it immediately throws you into the linked page when
you release your mouse.
Further notes:
We use the `isCollapsed` property here which 'seems' to be classed as
'experimental' in one place where I researched it:
https://developer.mozilla.org/en-US/docs/Web/API/Selection/isCollapsed
Although in others it makes no mention of this 'experimental' e.g:
- https://webplatform.github.io/docs/dom/Selection/isCollapsed/
- https://w3c.github.io/selection-api/#dom-selection-iscollapsed
I may have gone a little overboard in feature detection for this, but I
conscious of that fact that if `isCollapsed` doesn't exist at some point
in the future (something that seems unlikely). The code here will have
no effect on the UI. But I'd specifically like a second pair of eyes on
that.
* ui: Don't break right click, detects a secondary click on mousedown
* ui: Put anchor selection capability behind an ENV var
* ui: Reconciliate ember-data store when records are deleted via blocking
Currently we are barely using the ember-data store/cache, but it will
still cache records in the store even though technically we aren't using
it.
This adds a SyncTime to every record that uses blocking queries so we
can delete older records from the ember-data cache to prevent them
building up
* ui: Add basic timestamp method we can access from tests, fixup tests
Adds a timestamp method that we can access from within tests so we can
test that the SyncTime is being set.
There is probably a better way to do this, but this is also probably the
simplest approach - we are also likely to revisit this at a later date
1. Adds a Listeners class, which lets us...
2. Add Listeners recursively. So you can
createListeners().add(createListeners())
3. Also add the ability to `.add` as a plain function
This moves the entire idea more towards a generic teardown utility
- Removes 'type' icons (basically the proxy icon, not the text itself)
- Add support for Mesh Gateways plus their addresses
This adds a 'Mesh Gateway' type label to service and service instance
pages, plus a new 'Addresses' tab if the service is a Mesh Gateway
showing a table of addresses for the service - plus tests
* Add ui-content-path flag
* tests complete, regex validator on string, index.html updated
* cleaning up debugging stuff
* ui: Enable ember environment configuration to be set via the go binary at runtime (#5934)
* ui: Only inject {{.ContentPath}} if we are makeing a prod build...
...otherwise we just use the current rootURL
This gets injected into a <base /> node which solves the assets path
problem but not the ember problem
* ui: Pull out the <base href=""> value and inject it into ember env
See previous commit:
The <base href=""> value is 'sometimes' injected from go at index
serve time. We pass this value down to ember by overwriting the ember
config that is injected via a <meta> tag. This has to be done before
ember bootup.
Sometimes (during testing and development, basically not production)
this is injected with the already existing value, in which case this
essentially changes nothing.
The code here is slightly abstracted away from our specific usage to
make it easier for anyone else to use, and also make sure we can cope
with using this same method to pass variables down from the CLI through
to ember in the future.
* ui: We can't use <base /> move everything to javascript (#5941)
Unfortuantely we can't seem to be able to use <base> and rootURL
together as URL paths will get doubled up (`ui/ui/`).
This moves all the things that we need to interpolate with .ContentPath
to the `startup` javascript so we can conditionally print out
`{{.ContentPath}}` in lots of places (now we can't use base)
* fixed when we serve index.html
* ui: For writing a ContentPath, we also need to cope with testing... (#5945)
...and potentially more environments
Testing has more additional things in a separate index.html in `tests/`
This make the entire thing a little saner and uses just javascriopt
template literals instead of a pseudo handbrake synatx for our
templating of these files.
Intead of just templating the entire file this way, we still only
template `{{content-for 'head'}}` and `{{content-for 'body'}}`
in this way to ensure we support other plugins/addons
* build: Loosen up the regex for retrieving the CONSUL_VERSION (#5946)
* build: Loosen up the regex for retrieving the CONSUL_VERSION
1. Previously the `sed` replacement was searching for the CONSUL_VERSION
comment at the start of a line, it no longer does this to allow for
indentation.
2. Both `grep` and `sed` where looking for the omment at the end of the
line. We've removed this restriction here. We don't need to remove it
right now, but if we ever put the comment followed by something here the
searching would break.
3. Added `xargs` for trimming the resulting version string. We aren't
using this already in the rest of the scripts, but we are pretty sure
this is available on most systems.
* ui: Fix erroneous variable, and also force an ember cache clean on build
1. We referenced a variable incorrectly here, this fixes that.
2. We also made sure that every `make` target clears ember's `tmp` cache
to ensure that its not using any caches that have since been edited
everytime we call a `make` target.
* added docs, fixed encoding
* fixed go fmt
* Update agent/config/config.go
Co-Authored-By: R.B. Boyer <public@richardboyer.net>
* Completed Suggestions
* run gofmt on http.go
* fix testsanitize
* fix fullconfig/hcl by setting correct 'want'
* ran gofmt on agent/config/runtime_test.go
* Update website/source/docs/agent/options.html.md
Co-Authored-By: Hans Hasselberg <me@hans.io>
* Update website/source/docs/agent/options.html.md
Co-Authored-By: kaitlincarter-hc <43049322+kaitlincarter-hc@users.noreply.github.com>
* remove contentpath from redirectFS struct
1. Remove ember-cli-clipboard dependency
2. Provide a new copy-button component implementing the same
interface as ^ but make the clipboard functionality injectable
3. Provide 2 implementations of a Clipboard. One using clipboard.js (as
previously) and an additional local storage 'clipboard'.
4. add a BDD step to assert whats in the clipboard (the fake one)
Main reason here is that `document.exec` must be called by a user
interaction
* ui: Normal proxies line to services, sidecars to instances
Following on from https://github.com/hashicorp/consul/pull/5933 we
noticed that 'normal' proxies should link to the service, rather than
the service instance. Additionally proxy 'searching' within the
repository should take into account the name of the node that the
originating service is on (sidecar proxies are generally co-located)
Added an additional test here to prove that a sidecar-proxy with the
same service id but on a different node does not show the sidecar proxy
link.
1. All {{ivy-codemirror}} components need 'refreshing' when they become
visible via our own `didAppear` method on the `{{code-editor}}`
component
(also see:)
- https://github.com/hashicorp/consul/pull/4190#discussion_r193270223
- 73db111db8 (r225264296)
2. On initial investigation, it looks like the component we are using
for the code editor doesn't distinguish between setting its `value`
programatically and a `keyup` event, i.e. an interaction from the user.
We currently pretend that whenever its `value` changes, it is a `keyup`
event. This means that when we reset the `value` to `""`
programmatically for form resetting purposes, a 'pretend keyup' event
would also be fired, which would in turn kick off the validation, which
would fail and show an error message for empty values in other fields of
the form - something that is perfectly valid if you haven't typed
anything yet. We solved this by checking for `isPristine` on fields that
are allowed to be empty before you have typed anything.
Just because Consul gives us a 404 this doesn't guarantee the KV doesn't
exist, it doesn't even mean we don't have access to it. Furthermore we
should never destroyRecord's without user interaction (therefore only via the
repo.delete method).
This switches destroyRecord to unloadRecord which performs the
additional legwork to keep ember-data in sync with the actual truth.
unloadRecord unloads the record from ember-data rather than sending an API
delete request, which would have been the intent here.
1. Amends our `base` animation placeholder to always reset
transition-duration. This has no effect on other components that are
already using this animation.
2. Adds a confirming class whenever a key is pressed, to show the green
tick. Uses CSS via `transition-delay` for debouncing.
Previously we were creating a fake event and amending the name of the
fake event, this meant that other `event.target` properties weren't
being passed through (in this instance `checked`) this changes the
approach to not use fake events, and allows you to overwrite the name
that the form uses for `handleEvent`
This means its more straightforwards to calculate the height of the
listing itself. This component is currently only used on the form pages for tokens and roles, should therefore be a restricted size.
1. Includes Datacenter variable for intperolation
2. Amends text on the Settings page to reflect new keyword
3. Adds further acceptance testing around the new dashboard buttons
Encodes any variables passed in to be used for template interpolation, but importantly nothing else in the URL apart from the variables themselves. 'Generally' service names are reasonably URL safe, but we know of usecases using at least /s in service names.
The way icons are positioned was changed to enable icons for policy
names, and in a separate PR h2's where altered to provide a nicer
looking settings page. Once these PR's where merged together they
slighly effected each other. This commit tweaks the CSS to refine, but
will be revisted at a later date
This PR adds a new {{template-anchor}} component. This component lets you specify a 'href template' in a handlebars like format instead of a normal string href. This template will be interpolated with the contents of a vars="" attribute.
Also contains code to add an extra UI Setting to be able to store a template to be used for this anchor in localStorage
Adds support for ACL Roles and Service Identities CRUD, along with necessary changes to Tokens, and the CSS improvements required.
Also includes refinements/improvements for easier testing of deeply nested components.
1. ember-data adapter/serializer/model triplet for Roles
2. repository, form/validations and searching filter for Roles
3. Moves potentially, repeated, or soon to to repeated functionality
into a mixin (mainly for 'many policy' relationships)
4. A few styling tweaks for little edge cases around roles
5. Router additions, Route, Controller and templates for Roles
Also see:
* UI: ACL Roles cont. plus Service Identities (#5661 and #5720)
* ui: Replaces Service listing filterbar with a phrase-editor search (#5507)
1. New phrase-editor restricting search to whole phrases (acts on
enter key). Allows removal of previously entered phrases
2. Searching now allows arrays of terms, multiple terms work via AND
If a service instance show page is being viewed and the service instance
is deregistered, this closes the blocking query for the proxy as well as
the instance (the instances query will be clsed on the error)
Also adds skipped tests to nag in future
Previously the tomography wasn't using ember `get` so proxy updates
(specifically here whilst receiving a blocking update) wasn't working.
This adds `get` here until we update to newer `get`less ember and also
refactors slightly removing `n` and using `distance.length` instead
Skipped tests are adding here to nag us to come back here at some point.
1. If the modal gets bigger than 80% of the viewport height a scrollbar
will be shown. Currently there isn't anywhere it can get this big, but
future work involves possible larger modals
2. Usually its difficult to figure out which was the 'unchecked' radio
button using an onchange event. Luckily ember/handlebars changes its
properties after the onchange event, so knowing that and using an extra
data-checked attribute set via ember, we can figure out which radio
button has been 'unchecked'. This means the logic for opening an
closing modals becomes slightly easier
...also:
Temporarily overwrites native setTimeout and setInterval for e2e/acceptance
testing similar to how XHR is overwritten for e2e/acceptance testing.
This makes the blocking query acceptance tests run faster until we add a
better burstable rate limiter for blocking queries.
This commit includes several pieces of functionality to enable services
to be removed and the page to present information that this has happened
but also keep the deleted information on the page. Along with the more
usual blocking query based listing.
To enable this:
1. Implements `meta` on the model (only available on collections in
ember)
2. Adds new `catchable` ComputedProperty alongside a `listen` helper for
working with specific errors that can be thrown from EventSources in an
ember-like way. Briefly, normal computed properties update when a
property changes, EventSources can additionally throw errors so we can
catch them and show different visuals based on that.
Also:
Add support for blocking queries on the service instance detail page
1. Previous we could return undefined when a service instance has no
proxy, but this means we have nothing to attach `meta` to. We've changed
this to return an almost empty object, so with only a meta property.
At first glance there doesn't seem to be any way to provide a proxy
object to templates and be able to detect whether it is actually null
or not so we instead change some conditional logic in the templates to
detect the property we are using to generate the anchor.
2. Made a `pauseUntil` test helper function for steps where we wait for
things. This helps for DRYness but also means if we can move away from
setInterval to something else later, we can do it in one place
3. Whilst running into point 1 here, we managed to make the blocking
queries eternally loop. Whilst this is due to an error in the code and
shouldn't ever happen whilst in actual use, we've added an extra check
so that we only recur/loop the blocking query if the previous response has a
`meta.cursor`
Adds support for blocking queries on the node detail page (#5489)
1. Moves data re-shaping for the templates variables into a repository
so they are easily covered by blocking queries (into coordinatesRepo)
2. The node API returns a 404 as signal for deregistration, we also
close the sessions and coordinates blocking queries when this happens
This commit includes several pieces of functionality to enable services
to be removed and the page to present information that this has happened
but also keep the deleted information on the page. Along with the more
usual blocking query based listing.
To enable this:
1. Implements `meta` on the model (only available on collections in
ember)
2. Adds new `catchable` ComputedProperty alongside a `listen` helper for
working with specific errors that can be thrown from EventSources in an
ember-like way. Briefly, normal computed properties update when a
property changes, EventSources can additionally throw errors so we can
catch them and show different visuals based on that.
More recommendations for blocking queries clients was added here:
https://github.com/hashicorp/consul/pull/5358
This commit mainly adds cursor/index validation/correction based on
these recommendations (plus tests)
The recommendations also suggest that clients should include rate
limiting. Because of this, we've moved the throttling out of Consul UI
specific code and into Blocking Query specific code. Currently the 'rate
limiting' in this commit only adds a sleep to every iteration of the
loop, which is not the recommended approach, but the code here organizes
the throttling functionality into something we can work with later to
provide something more apt.
* ui: Add forking based on service instance id existence
Proxies come in 2 flavours, 'normal' and sidecar. We know when a proxy
is a sidecar proxy based on whether a DestinationServiceID is set.
LocalServiceAddress and LocalServicePort are only relevant for sidecar
proxies.
This adds template logic to show different text depending on this
information.
Additionally adds test around connect proxies (#5418)
1. Adds page object for the instance detail page
2. Adds further scenario steps used in the tests
3. Adds acceptance testing around the instance detail page. Services
with proxies and the sidecar proxies and proxies themselves
4. Adds datacenter column for upstreams
5. Fixes bug routing bug for decision as to whether to request proxy
information or not
Add totals to some listing views, remove healthcheck totals
1. Adds markup to render totals for Services, Nodes, Intentions and v1
ACLs
2. Removes counts from healthcheck filters, and therefore simplify text,
moving the copy to the templates
3. Alter test to reflect the fact that the text of the buttons are no
static in the component template rather than a dynamic attribute
This gives more prominence to 'Service Instances' as opposed to 'Services'. It also begins to surface Connect related 'nouns' such as 'Proxies' and 'Upstreams' and begins to interconnect them giving more visibility to operators.
Various smaller changes:
1. Move healthcheck-status component to healthcheck-output
2. Create a new healthcheck-status component for showing the number of
checks plus its icon
3. Create a new healthcheck-info component to group multiple statuses
plus a different view if there are no checks
4. Componentize tag-list
* ui: Add ember steps:list command for listing available steps
1. Adds `command` addon to house the new command
2. Start to organize out the steps themselves, bring a bit more order to
things ready to dedupe and cleanup
- Maintain http headers as JSON-API meta for all API requests (#4946)
- Add EventSource ready for implementing blocking queries
- EventSource project implementation to enable blocking queries for service and node listings (#5267)
- Add setting to enable/disable blocking queries (#5352)
Adds xhr connection managment to http/1.1 installs
This includes various things:
1. An object pool to 'acquire', 'release' and 'dispose' of objects, also
a 'purge' to completely empty it
2. A `Request` data object, mainly for reasoning about the object better
3. A pseudo http 'client' which doens't actually control the request
itself but does help to manage the connections
An initializer is used to detect the script element of the consul-ui sourcecode
which we use later to sniff the protocol that we are most likely using for API access
1. The factory is taken from the ember source, but makes it more
reusable
2. Purify converts conventional ember `computed` into a pure version
This commit only adds new files that could be used further down the line
`window` and `document` are easily injected anyhow, but this
primarily this keeps everything dom related in the same place.
Included here are changes to make all ember related objects use the dom
service `document` and `viewport` instead of just `document` and
`window`.
Quote from a previous PR (#4924) which explains the thinking around this:
> Now I have all these things in the dom service, it would make sense
to get window from there also. I was thinking of making a viewport
method, which would be a nice word whether window was a browser window,
an iframe (not really a window) like when ember testing, or anything
else. To me the viewport is what we are actually talking about here.
1. Ensure any unexpected developer errors are passed through/shown
2. Previously when errors where returns/resolved the special
isEnabled/isAuthorized would never get resolved. This was fine as they
were set to false to start with anyway, but this resolves them again to
false for completeness
3. Improved unit testing coverage
Move all the dom-things to use the dom service in tabular-collection, feedback-dialog, list-collection and node show. Move get-component-factory into utils/dom and use dom.root() in a few more places
This includes an additional `dom.components` method which gives you a
list of components matching the selector instead of just one.
- Adds full set of svg icons as CSS/Sass variables to the source
- Starts picking out some frame-grays, whilst commenting in possibles
- Remove color prefixing
The prefixes `ui-` and `brand-` for colors hav been removed. This makes
colors slightly easier to type.
In order to differentiate between brand colors and 'normal' colors, normal
colors are named as 'true colors' i.e. blue, red, green etc etc
whereas the brand colors used a more premium sounding name such as
'steel' for vault gray, 'magenta' for consul, 'cobalt' for vagrant etc etc.
This does several things to make improving the search experience easier
moving forwards:
1. Separate searching off from filtering. 'Searching' can be thought of
as specifically 'text searching' whilst filtering is more of a
boolean/flag search.
2. Decouple the actual searching functionality to almost pure,
isolated / unit testable units and unit test. (I still import embers get
which, once I upgrade to 3.5, I shouldn't need)
3. Searching rules are now configurable from the outside, i.e. not
wrapped in Controllers or Components.
4. General searching itself now can use an asynchronous approach based on
events. This prepares for future possibilities of handing off the
searching to a web worker or elsewhere, which should aid in large scale
searching and prepares the way for other searching methods.
5. Adds the possibility of have multiple searches in one
template/route/page.
Additionally, this adds a WithSearching mixin to aid linking the
searching to ember in an ember-like way in a single place. Plus a
WithListeners mixin to aid with cleaning up of event listeners on
Controller/Component destruction.
Post-initial work I slightly changed the API of create listeners:
Returning the handler from a `remover` means you can re-add it again if you
want to, this avoids having to save a reference to the handler elsewhere
to do the same.
The `remove` method itself now returns an array of handlers, again you
might want to use these again or something, and its also more useful
then just returning an empty array.
The more I look at this the more I doubt that you'll ever use `remove`
to remove individual handlers, you may aswell just use the `remover`
returned from add. I've added some comments to reflect this, but they'll
likely be removed once I'm absolutely sure of this.
I also added some comments for WithSearching to explain possible further
work re: moving `searchParams` so it can be `hung` off the
controller object
The original version of ember-block-slots doesn't support ember 3 and it
seems like development has stalled on the original version.
This adds a modified version as an in-repo-addon that is compatible with
ember 3.
In 858b05fc31 (diff-46ef88aa04507fb9b039344277531584)
we removed encoding values in pathnames as we thought they were
eventually being encoded by `ember`. It looks like this isn't the case.
Turns out sometimes they are encoded sometimes they aren't. It's complicated.
If at all possible refer to the PR https://github.com/hashicorp/consul/pull/5206.
It's related to the difference between `dynamic` routes and `wildcard` routes.
Partly related to this is a decision on whether we urlencode the slashes within service names or not. Whilst historically we haven't done this, we feel its a good time to change this behaviour, so we'll also be changing services to use dynamic routes instead of wildcard routes. So service links will then look like /ui/dc-1/services/application%2Fservice rather than /ui/dc-1/services/application/service
Here, we define our routes in a declarative format (for the moment at least JSON) outside of Router.map, and loop through this within Router.map to set all our routes using the standard this.route method. We essentially configure our Router from the outside. As this configuration is now done declaratively outside of Router.map we can also make this data available to href-to and paramsFor, allowing us to detect wildcard routes and therefore apply urlencoding/decoding.
Where I mention 'conditionally' below, this is detection is what is used for the decision.
We conditionally add url encoding to the `{{href-to}}` helper/addon. The
reasoning here is, if we are asking for a 'href/url' then whatever we
receive back should always be urlencoded. We've done this by reusing as much
code from the original `ember-href-to` addon as possible, after this
change every call to the `{{href-to}}` helper will be urlencoded.
As all links using `{{href-to}}` are now properly urlencoded. We also
need to decode them in the correct place 'on the other end', so..
We also override the default `Route.paramsFor` method to conditionally decode all
params before passing them to the `Route.model` hook.
Lastly (the revert), as we almost consistently use url params to
construct API calls, we make sure we re-encode any slugs that have been
passed in by the user/developer. The original API for the `createURL`
function was to allow you to pass values that didn't need encoding,
values that **did** need encoding, followed by query params (which again
require url encoding)
All in all this should make the entire ember app url encode/decode safe.
In order to continue supporting the legacy ACL system, we replace
the 500 error from a non-existent `self` endpoint with a response of a
`null` `AccessorID` - which makes sense (a null AccessorID means old
API)
We then redirect the user to the old ACL pages which then gives a 403
if their token was wrong which then redirects them back to the login page.
Due to the multiple redirects and not wanting to test the validity of the token
before redirecting (thus calling the same API endpoint twice), it is not
straightforwards to turn the 'faked' response from the `self` endpoint
into an error (flash messages are 'lost' through multiple redirects).
In order to make this a slightly better experience, you can now return a
`false` during execution of an action requiring success/failure
feedback, this essentially skips the notification, so if the action is
'successful' but you don't want to show the notification, you can. This
resolves showing a successful notification when the `self` endpoint
response is faked. The last part of the puzzle is to make sure that the
global 403 catching error in the application Route also produces an
erroneous notification.
Please note this can only happen with a ui client using the new ACL
system when communicating with a cluster using the old ACL system, and
only when you enter the wrong token.
Lastly, further acceptance tests have been added around this
This commit also adds functionality to avoid any possible double
notification messages, to avoid UI overlapping
In some circumstances a consul 1.4 client could be running in an
un-upgraded 1.3 or lower cluster. Currently this gives a 500 error on
the new ACL token endpoint. Here we catch this specific 500 error/message
and set the users AccessorID to null. Elsewhere in the frontend we use
this fact (AccessorID being null) to decide whether to present the
legacy or the new ACL UI to the user.
Also:
- Re-adds in most of the old style ACL acceptance tests, now that we are keeping the old style UI
- Restricts code editors to HCL only mode for all `Rules` editing (legacy/'half legacy'/new style)
- Adds a [Stop using] button to the old style ACL rows so its possible to logout.
- Updates copy and documentation links for the upgrade notices
1. Unskip some trivial tests that were being tested higher up
2. Istanbul ignore some code for coverage.
1. Things that I didn't write and need to 100% follow
2. The source code checking test that has Istanbul code injected into
it
3. Add a few simple test cases
4. Support passing port numbers through to `ember serve` and `ember
test` for use cases that would benefit from being able to configure the
ports things are served over but still use `yarn run` thus reusing the
`yarn run` config in `package.json`
Repositories are a class of services to help with CRUD actions, most of
the functionality is reused across various Models. This creates a new
repository service that centralizes all this reused functionality.
Inheritance via ember `Service.extend` is used as opposed to
decorating via Mixins.
1. Move all repository services (and their tests) to a
services/repository folder
2. Standardize on a singular name format 'node vs nodes'
3. Create a new 'repository' service to centralize functionality. This
should be extended by 'repository' services
Essentially this was missing a call to `super`. The error unfortuantely
didn't arise in the tests as it only errors when the node list has 4
items are more (the 4 columns), and the acceptence tests by change were
only filling the page with 3 nodes for test purposes.
I've bumped the amount of nodes up to 4 in the tests, which then causes
the tests to fail, made the fix by adding the `super` call, and the
tests now pass.
I also tested the UI/text searching on a 10,000 node system, and
everything now works as expected.
1. The grid based unhealthy cards are now clamped to only four wide
maximum. This means that on larger screen the cards are much wider
meaning you can view more information. Grid gutters are also clamped at
a certain ideal width screen, remaining responsive for anything below
this.
2. The healthy node columns are finally responsive following the same
column rules as unhealthy nodes
Upgrade all patch and minor upgradeable packages, also uses `only`
in ember-cli-build to reduce the included helpers from certain helper
packages.
Make some major version upgrades for some dev tools
- husky
- lint-staged
- ember-cli-yadda
- ember-cli-sass (also moved from node-sass to dart-sass)
Minor tweak: spotted css file (instead of scss file), rename
The move to `dart-sass`:
dart-sass has been the primary implementation of sass for ~6 months and
will receive updates earlier than libsass (ruby-sass itself is now deprecated)
Other benefits include not having to recompile (via `npm rebuild` or similar)
when switching platforms and an 'almost' javascript based solution.
This update also alters some media queries that, whilst wouldn't compile
anymore with either an updated libsass or dart-sass, where probably a
little over complicated anyway, I've therefore made them similar to
other breakpoints that made sense.
Various ember addons produced deprecation messages, some in the browser
console and some in terminal. Upgrading and replacing some of these has
reduced this.
Upgrades:
- ember-collection
- ember-computed-style
Replacements:
- ember-pluralize replaced with ember-inflector
- ember-cli-format-number replaced with custom helper using standard
`toLocaleString`
Removing ember-cli-format-number also meant some further changes related
to decimal places in the tomography graph, done using `toFixed`
The ExternalSources background-images have also now been escaped
correctly preventing in-development `console` warnings.
The only deprecation warnings are now from ember-block-slots, only in
terminal, making for a better development experience overall, especially now we
have an empty browser console
Also adds a `callIfType` 'helper util' which is a util specifically for helpers (it conforms to a helper argument signature) to be expanded upon later.
1. The 'Services' header need to be knocked ot the right slightly to line
up properly with the service name when there are no external source
icons.
2. Add a single space between ServiceName and ServiceID on the Node >
[Services] tab table.
* Move almost everything to use %frames
* Fix pill styles of ACL types
* Remove horizontal scrollbars from dom recycling scroller component
* Make text areas look ok in Firefox
* Remove ember-bulma-css
* New form elements, break out %toggle
* %button design tweaks
* %form-element design tweaks
* Better hashicorp logo
* Small screen CSS improvements (#4624)
1. Reduce header size when there are no breadcrumbs
2. Make the filters toggleable, closed by default
3. Reduce the size of the footer on small screens
4. Hide all non-primary columns for forms
5. Slightly change the layout of various items, mainly buttons within
forms
6. Make some confirmation dialogs work vertically on small screens. Guessing we might be better just using native confirmations on small
screens
Having the code editor on removes the text area from the DOM, making it
more difficult to enter text in the text editor during testing. This
turns the code editor off whilst making edits during testing.
No changes to UI code
The mocks where using randomly generated `ExternalSources` this change
makes sure they are fixed so we can reliably test the values. No change
to actual UI code
Sets the code toggle on the KV edit/create page to be on by default, we figured most people probably prefer this view.
Also, previously we forced the KV toggle back to a default setting for every
time you visited a KV form page. We've now changed this so that the KV code
toggle button acts as a 'global' toggle. So whatever you set it as will
be the same for every KV for the lifetime of your 'ember session'
If we are to keep this, then consider saving this into localStorage
settings or similar, added some thoughts in comments re: this as it's very likely
to happen.
The error notification was being shown on creation of an intention. This
was as a result of #4572 and/or #4572 and has not been included in a
release.
This includes a fix, plus tests to try to prevent any further regression.
1. Addition of external source icons for services marked as such.
2. New %with-tooltip css component (wip)
3. New 'no healthcheck' icon as external sources might not have
healthchecks, also minus icon on node cards in the service detail view
4. If a service doesn't have healthchecks, we use the [Services] tabs as the
default instead of the [Health Checks] tab in the Service detail page.
5. `css-var` helper. The idea here is that it will eventually be
replaced with pure css custom properties instead of having to use JS. It
would be nice to be able to build the css variables into the JS at build
time (you'd probably still want to specify in config which variables you
wanted available in JS), but that's possible future work.
Lastly there is probably a tiny bit more testing edits here than usual,
I noticed that there was an area where the dynamic mocking wasn't
happening, it was just using the mocks from consul-api-double, the mocks
I was 'dynamically' setting happened to be the same as the ones in
consul-api-double. I've fixed this here also but it wasn't effecting
anything until actually made certain values dynamic.
When adding an auto resizing (heightwise) code editor, the
ivy-codemirror plugin seems to do this using more nested divs. This div
had a horizontal scroller but couldn't be seen on some platforms (with
hidden scrollbars). This commit makes the code editor slightly more
usable and more visually correct by removing the scroll bar in this div
to stop producing the 'split view look', yet keeping the horizontal
scroller at the bottom of the code editor for when you enter code that
is wider than the area. A max-width has also been added here to prevent
the text area from growing off the side of the page.
Another improvement to the code editor here is the addition of a nicer
color for hightlighting text selection so its at least visible.
Lastly, there was a way you could get the bottom horizontal scrollbar to overlay
the code in the editor. This makes sure there is always some space at
the bottom of the editor to make sure the code won't be obscured
1. The previously used TextEncoder/Decoder (used as a polyfill for
browsers that don't have a native version) didn't expose an encoder via
CommonJS. Use a different polyfill that exposes both a decoder and an
encoder.
2. The feature detection itself was flawed. This does a less error prone
detection that ensures native encoding/decoding where available and polyfilled
encoding/decoding where not available.
* Move notification texts to a slightly different layer (#4572)
* Further Simplify/refactor the actions/notification layer (#4573)
1. Move the 'with-feedback' actions to a 'with-blocking-action' mixin
which better describes what it does
2. Additional set of unit tests almost over the entire layer to prove
things work/add confidence for further changes
The multiple 'with-action' mixins used for every 'index/edit' combo are
now reduced down to only contain the functionality related to their
specific routes, i.e. where to redirect.
The actual functionality to block and carry out the action and then
notify are 'almost' split out so that their respective classes/objects do
one thing and one thing 'well'.
Mixins are chosen for the moment as the decoration approach used by
mixins feels better than multiple levels of inheritence, but I would
like to take this fuether in the future to a 'compositional' based
approach.
There is still possible further work to be done here, but I'm a lot
happier now this is reduced down into separate parts.
* Begin refactoring CSS into component folders. Moved most
components into layout/skin folders, left out a couple of ones I want
to think about more.
* Adjust grays based on recent Structure changes
* Switch to fullscreen layout for lists and detail, left aligned forms (#4435)
* Specifically use the 'actions_close' label, not just the :last-child (actions-group)
* Replace some non-var-ed colours in vaults code skin, plus prefixing (black and white)
ui: Repo layer integration tests for methods that touch the API
Includes a `repo` test helper to make repetitive tasks easier, plus a
injectable reporter for sending performance metrics to a centralized metrics
system
Also noticed somewhere in the ember models that I'd like to improve, but left
for the moment to make sure I concentrate on one task at a time, more or less:
The tests currently asserts against the existing JSON tree, which doesn't
seem to be a very nice tree.
The work at hand here is to refactor what is there, so test for the not
nice tree to ensure we don't get any regression, and add a skipped test
so I can come back here later
WIP Unskip some lower level trivial tests.
This is the beginning of work to unskip some of the more trivial tests that I'd skipped a while back (if the thing they are testing broke, they would have failed higher up in other acceptance tests).
I'd rather keep the tests, as they do test things in a more isolated manner, and the plan was to always come back and work to unskip them time allowing.
I didn't get to far into this work in progress here, but I'd rather merge what I've done all the same and come back at a later date and continue.
1. Split the resizing functionality of into a separate mixin to be
shared across components
2. Add basic integration tests to prove that everything is getting
called through out the lifetime of the app. I decided against unit
testing as there isn't really any isolated logic to be tested, more
checking that things are being called in the correct order etc i.e. the
integration is correct.
Adds assertion to with-resizing so its obvious to override `resize`
Adds additional 'enterprise' text underneath the 'startup' logo if the
ui is built with a CONSUL_BINARY_TYPE environment variable that doesn't
equal `oss`.
* Add some tests to check the correct GET API endpoints are called
* Refactor adapters
1. Add integration tests for `urlFor...` and majority `handleResponse` methods
2. Refactor out `handleResponse` a little more into single/batch/boolean
methods
3. Move setting of the `Datacenter` property into the `handleResponse`
method, basically the same place that the uid is being set using the dc
parsed form the URL
4. Add some Errors for if you don't pass ids to certain `urlFor` methods
1. In the Services > Services detail page for both healthy and unhealthy
nodes, also add searching by Service.ID here
2. In the Nodes > Node detail > [Services] tab only if its different
from the Service name, add searching by Service.ID here
We now essentially do 2 redirects if you hit a `folder/`
1. If you visit `/ui/dc1/kv/folder/`, `consul` will redirect you to `/ui/dc1/kv/folder`
2. Once redirected to `/ui/dc1/kv/folder` via a 301, use ember/history
API to redirect you back to `/ui/dc1/kv/folder/`.
Bit long winded, but achieves what we want without having to get stuck
into `consul` itself to remove the 301 for the UI
The Consul API can pass through `Value: null` which does not get cast to
a string by ember-data. This snowballs into problems with `atob` which
then tried to decode `null`.
There are 2 problems here.
1. `Value` should never be `null`
- I've added a removeNull function to shallowly loop though props and
remove properties that are `null`, for the moment this is only on
single KV JSON responses - therefore `Value` will never be `null`
which is the root of the problem
2. `atob` doesn't quite follow the `window.atob` API in that the
`window.atob` API casts everything down to a string first, therefore it
will try to decode `null` > `'null'` > `crazy unicode thing`.
- I've commented in a fix for this, but whilst this shouldn't be
causing anymore problems in our UI (now that `Value` is never `null`),
I'll uncomment it in another future release. Tests are already written
for it which more closely follow `window.atob` but skipped for now
(next commit)
John Cowen
Kenia
John Cowen
Matt Keeler
Dmitry Shemin
Jack Pearkes
Joel Kuzmarski
Sarah Christoff
Jihoon Chung
Alvin Huang
Hans Hasselberg