* Include secret type when building resources from config snapshot
* First pass at generating envoy secrets from api-gateway snapshot
* Update comments for xDS update order
* Add secret type + corresponding golden files to existing tests
* Initialize test helpers for testing api-gateway resource generation
* Generate golden files for new api-gateway xDS resource test
* Support ADS for TLS certificates on api-gateway
* Configure TLS on api-gateway listeners
* Inline TLS cert code
* update tests
* Add SNI support so we can have multiple certificates
* Remove commented out section from helper
* regen deep-copy
* Add tcp tls test
---------
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
* Simple API Gateway e2e test for tcp routes
* Drop DNSSans since we don't front the Gateway with a leaf cert
* WIP listener tests for api-gateway
* Return early if no routes
* Add back in leaf cert to testing
* Fix merge conflicts
* Re-add kind to setup
* Fix iteration over listener upstreams
* New tcp listener test
* Add tests for API Gateway with TCP and HTTP routes
* Move zero-route check back
* Drop generateIngressDNSSANs
* Check for chains not routes
---------
Co-authored-by: Andrew Stucki <andrew.stucki@hashicorp.com>
Fix mesh gateways incorrectly matching peer locality.
This fixes an issue where local mesh gateways use an
incorrect address when attempting to forward traffic to a
peered datacenter. Prior to this change it would use the
lan address instead of the wan if the locality matched. This
should never be done for peering, since we must route all
traffic through the remote mesh gateway.
* Fix infinite recursion on InlineCertificateConfigEntry
GetNamespace() + GetMeta() were calling themselves. This change also simplifies by removing nil-checking to match pre-existing config entries
Co-Authored-By: Andrew Stucki <3577250+andrewstucki@users.noreply.github.com>
* Add tests for inline-certificate
* Add alias for private key field on inline-certificate
* Use valid certificate + private key for inline-certificate tests
---------
Co-authored-by: Andrew Stucki <3577250+andrewstucki@users.noreply.github.com>
Prior to this PR, servers / agents would panic and crash if an ingress
or api gateway were configured to use a discovery chain that both:
1. Referenced a peered service
2. Had a mesh gateway mode of local
This could occur, because code for handling upstream watches was shared
between both connect-proxy and the gateways. As a short-term fix, this
PR ensures that the maps are always initialized for these gateway services.
This PR also wraps the proxycfg execution and service
registration calls with recover statements to ensure that future issues
like this do not put the server into an unrecoverable state.
* [API Gateway] Add integration test for conflicted TCP listeners
* [API Gateway] Update simple test to leverage intentions and multiple listeners
* Fix broken unit test
* [API Gateway] Add integration test for HTTP routes
* [API Gateway] Add integration test for conflicted TCP listeners
* [API Gateway] Update simple test to leverage intentions and multiple listeners
* Fix broken unit test
* PR suggestions
Prior to this commit, secondary datacenters could not be initialized
as peering acceptors if ACLs were enabled. This is due to the fact that
internal server-to-server API calls would fail because the management
token was not generated. This PR makes it so that both primary and
secondary datacenters generate their own management token whenever
a leader is elected in their respective clusters.
* Stub proxycfg handler for API gateway
* Add Service Kind constants/handling for API Gateway
* Begin stubbing for SDS
* Add new Secret type to xDS order of operations
* Continue stubbing of SDS
* Iterate on proxycfg handler for API gateway
* Handle BoundAPIGateway config entry subscription in proxycfg-glue
* Add API gateway to config snapshot validation
* Add API gateway to config snapshot clone, leaf, etc.
* Subscribe to bound route + cert config entries on bound-api-gateway
* Track routes + certs on API gateway config snapshot
* Generate DeepCopy() for types used in watch.Map
* Watch all active references on api-gateway, unwatch inactive
* Track loading of initial bound-api-gateway config entry
* Use proper proto package for SDS mapping
* Use ResourceReference instead of ServiceName, collect resources
* Fix typo, add + remove TODOs
* Watch discovery chains for TCPRoute
* Add TODO for updating gateway services for api-gateway
* make proto
* Regenerate deep-copy for proxycfg
* Set datacenter on upstream ID from query source
* Watch discovery chains for http-route service backends
* Add ServiceName getter to HTTP+TCP Service structs
* Clean up unwatched discovery chains on API Gateway
* Implement watch for ingress leaf certificate
* Collect upstreams on http-route + tcp-route updates
* Remove unused GatewayServices update handler
* Remove unnecessary gateway services logic for API Gateway
* Remove outdate TODO
* Use .ToIngress where appropriate, including TODO for cleaning up
* Cancel before returning error
* Remove GatewayServices subscription
* Add godoc for handlerAPIGateway functions
* Update terminology from Connect => Consul Service Mesh
Consistent with terminology changes in https://github.com/hashicorp/consul/pull/12690
* Add missing TODO
* Remove duplicate switch case
* Rerun deep-copy generator
* Use correct property on config snapshot
* Remove unnecessary leaf cert watch
* Clean up based on code review feedback
* Note handler properties that are initialized but set elsewhere
* Add TODO for moving helper func into structs pkg
* Update generated DeepCopy code
* gofmt
* Begin stubbing for SDS
* Start adding tests
* Remove second BoundAPIGateway case in glue
* TO BE PICKED: fix formatting of str
* WIP
* Fix merge conflict
* Implement HTTP Route to Discovery Chain config entries
* Stub out function to create discovery chain
* Add discovery chain merging code (#16131)
* Test adding TCP and HTTP routes
* Add some tests for the synthesizer
* Run go mod tidy
* Pairing with N8
* Run deep copy
* Clean up GatewayChainSynthesizer
* Fix missing assignment of BoundAPIGateway topic
* Separate out synthesizeChains and toIngressTLS
* Fix build errors
* Ensure synthesizer skips non-matching routes by protocol
* Rebase on N8s work
* Generate DeepCopy() for API gateway listener types
* Improve variable name
* Regenerate DeepCopy() code
* Fix linting issue
* fix protobuf import
* Fix more merge conflict errors
* Fix synthesize test
* Run deep copy
* Add URLRewrite to proto
* Update agent/consul/discoverychain/gateway_tcproute.go
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
* Remove APIGatewayConfigEntry that was extra
* Error out if route kind is unknown
* Fix formatting errors in proto
---------
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
Co-authored-by: Andrew Stucki <andrew.stucki@hashicorp.com>
* Fix detecting when a route doesn't bind to a gateway because it's already bound
* Clean up status setting code
* rework binding a bit
* More cleanup
* Flatten all files
* Fix up docstrings
* Stub proxycfg handler for API gateway
* Add Service Kind constants/handling for API Gateway
* Begin stubbing for SDS
* Add new Secret type to xDS order of operations
* Continue stubbing of SDS
* Iterate on proxycfg handler for API gateway
* Handle BoundAPIGateway config entry subscription in proxycfg-glue
* Add API gateway to config snapshot validation
* Add API gateway to config snapshot clone, leaf, etc.
* Subscribe to bound route + cert config entries on bound-api-gateway
* Track routes + certs on API gateway config snapshot
* Generate DeepCopy() for types used in watch.Map
* Watch all active references on api-gateway, unwatch inactive
* Track loading of initial bound-api-gateway config entry
* Use proper proto package for SDS mapping
* Use ResourceReference instead of ServiceName, collect resources
* Fix typo, add + remove TODOs
* Watch discovery chains for TCPRoute
* Add TODO for updating gateway services for api-gateway
* make proto
* Regenerate deep-copy for proxycfg
* Set datacenter on upstream ID from query source
* Watch discovery chains for http-route service backends
* Add ServiceName getter to HTTP+TCP Service structs
* Clean up unwatched discovery chains on API Gateway
* Implement watch for ingress leaf certificate
* Collect upstreams on http-route + tcp-route updates
* Remove unused GatewayServices update handler
* Remove unnecessary gateway services logic for API Gateway
* Remove outdate TODO
* Use .ToIngress where appropriate, including TODO for cleaning up
* Cancel before returning error
* Remove GatewayServices subscription
* Add godoc for handlerAPIGateway functions
* Update terminology from Connect => Consul Service Mesh
Consistent with terminology changes in https://github.com/hashicorp/consul/pull/12690
* Add missing TODO
* Remove duplicate switch case
* Rerun deep-copy generator
* Use correct property on config snapshot
* Remove unnecessary leaf cert watch
* Clean up based on code review feedback
* Note handler properties that are initialized but set elsewhere
* Add TODO for moving helper func into structs pkg
* Update generated DeepCopy code
* gofmt
* Generate DeepCopy() for API gateway listener types
* Improve variable name
* Regenerate DeepCopy() code
* Fix linting issue
* Temporarily remove the secret type from resource generation
This endpoint shows total services, connect service instances and
billable service instances in the local datacenter or globally. Billable
instances = total service instances - connect services - consul server instances.
* Add additional controller implementations
* remove additional interface
* Fix comparison checks and mark unused contexts
* Switch to time.Now().UTC()
* Add a pointer helper for shadowing loop variables
* Extract anonymous functions for readability
* clean up logging
* Add Type to the Condition proto
* Update some comments and add additional space for readability
* Address PR feedback
* Fix up dirty checks and change to pointer receiver
remove redundant vault api retry logic
We upgraded Vault API module version to a version that has built-in
retry logic. So this code is no longer necessary.
Also add mention of re-configuring the provider in comments.
* remove legacy tokens
* remove lingering legacy token references from docs
* update language and naming for token secrets and accessor IDs
* updates all tokenID references to clarify accessorID
* remove token type references and lookup tokens by accessorID index
* remove unnecessary constants
* replace additional tokenID param names
* Add warning info for deprecated -id parameter
Co-authored-by: Paul Glass <pglass@hashicorp.com>
* Update field comment
Co-authored-by: Paul Glass <pglass@hashicorp.com>
---------
Co-authored-by: Paul Glass <pglass@hashicorp.com>
* feat: calculate retry wait time with exponential back-off
* test: add test for getWaitTime method
* feat: enforce random jitter between min value from previous iteration and current
* extract randomStagger to simplify tests and use Milliseconds to avoid float math.
* rename variables
* add test and rename comment
---------
Co-authored-by: Poonam Jadhav <poonam.jadhav@hashicorp.com>
Ensure nothing in the troubleshoot go module depends on consul's top level module. This is so we can import troubleshoot into consul-k8s and not import all of consul.
* turns troubleshoot into a go module [authored by @curtbushko]
* gets the envoy protos into the troubleshoot module [authored by @curtbushko]
* adds a new go module `envoyextensions` which has xdscommon and extensioncommon folders that both the xds package and the troubleshoot package can import
* adds testing and linting for the new go modules
* moves the unit tests in `troubleshoot/validateupstream` that depend on proxycfg/xds into the xds package, with a comment describing why those tests cannot be in the troubleshoot package
* fixes all the imports everywhere as a result of these changes
Co-authored-by: Curt Bushko <cbushko@gmail.com>
fix goroutine leak in renew testing
Test overwrote the stopWatcher() function variable for the test without
keeping and calling the original value. The original value is the
function that stops the goroutine... so it needs to be called.
* Add Peer field to service-defaults upstream overrides.
* add api changes, compat mode for service default overrides
* Fixes based on testing
---------
Co-authored-by: DanStough <dan.stough@hashicorp.com>
Use only the agent token for deregistration during anti-entropy
The previous behavior had the agent attempt to use the "service" token
(i.e. from the `token` field in a service definition file), and if that
was not set then it would use the agent token.
The previous behavior was problematic because, if the service token had
been deleted, the deregistration request would fail. The agent would
retry the deregistration during each anti-entropy sync, and the
situation would never resolve.
The new behavior is to only/always use the agent token for service and
check deregistration during anti-entropy. This approach is:
* Simpler: No fallback logic to try different tokens
* Faster (slightly): No time spent attempting the service token
* Correct: The agent token is able to deregister services on that
agent's node, because:
* node:write permissions allow deregistration of services/checks on
that node.
* The agent token must have node:write permission, or else the agent
is not be able to (de)register itself into the catalog
Co-authored-by: Vesa Hagström <weeezes@gmail.com>
* Stub Config Entries for Consul Native API Gateway (#15644)
* Add empty InlineCertificate struct and protobuf
* apigateway stubs
* new files
* Stub HTTPRoute in api pkg
* checkpoint
* Stub HTTPRoute in structs pkg
* Simplify api.APIGatewayConfigEntry to be consistent w/ other entries
* Update makeConfigEntry switch, add docstring for HTTPRouteConfigEntry
* Add TCPRoute to MakeConfigEntry, return unique Kind
* proto generated files
* Stub BoundAPIGatewayConfigEntry in agent
Since this type is only written by a controller and read by xDS, it doesn't need to be defined in the `api` pkg
* Add RaftIndex to APIGatewayConfigEntry stub
* Add new config entry kinds to validation allow-list
* Add RaftIndex to other added config entry stubs
* fix panic
* Update usage metrics assertions to include new cfg entries
* Regenerate proto w/ Go 1.19
* Run buf formatter on config_entry.proto
* Add Meta and acl.EnterpriseMeta to all new ConfigEntry types
* Remove optional interface method Warnings() for now
Will restore later if we wind up needing it
* Remove unnecessary Services field from added config entry types
* Implement GetMeta(), GetEnterpriseMeta() for added config entry types
* Add meta field to proto, name consistently w/ existing config entries
* Format config_entry.proto
* Add initial implementation of CanRead + CanWrite for new config entry types
* Add unit tests for decoding of new config entry types
* Add unit tests for parsing of new config entry types
* Add unit tests for API Gateway config entry ACLs
* Return typed PermissionDeniedError on BoundAPIGateway CanWrite
* Add unit tests for added config entry ACLs
* Add BoundAPIGateway type to AllConfigEntryKinds
* Return proper kind from BoundAPIGateway
* Add docstrings for new config entry types
* Add missing config entry kinds to proto def
* Update usagemetrics_oss_test.go
* Use utility func for returning PermissionDeniedError
* Add BoundAPIGateway to proto def
Co-authored-by: Sarah Alsmiller <sarah.alsmiller@hashicorp.com>
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
* Add APIGateway validation
* Fix comment
* Add additional validations
* Add cert ref validation
* Add protobuf definitions
* Tabs to spaces
* Fix up field types
* Add API structs
* Move struct fields around a bit
* EventPublisher subscriptions for Consul Native API Gateway (#15757)
* Create new event topics in subscribe proto
* Add tests for PBSubscribe func
* Make configs singular, add all configs to PBToStreamSubscribeRequest
* Add snapshot methods
* Add config_entry_events tests
* Add config entry kind to topic for new configs
* Add unit tests for snapshot methods
* Start adding integration test
* Test using the new controller code
* Update agent/consul/state/config_entry_events.go
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
* Check value of error
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
* Add controller stubs for API Gateway (#15837)
* update initial stub implementation
* move files, clean up mutex references
* Remove embed, use idiomatic names for constructors
* Remove stray file introduced in merge
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
* Initial server-side and proto defs
* drop trailing whitespace
* Add APIGateway validation (#15847)
* Add APIGateway validation
* Fix comment
* Add additional validations
* Add cert ref validation
* Add protobuf definitions
* Tabs to spaces
* Fix up field types
* Add API structs
* Move struct fields around a bit
* APIGateway InlineCertificate validation (#15856)
* Add APIGateway validation
* Add additional validations
* Add protobuf definitions
* Tabs to spaces
* Add API structs
* Move struct fields around a bit
* Add validation for InlineCertificate
* Fix ACL test
* APIGateway BoundAPIGateway validation (#15858)
* Add APIGateway validation
* Fix comment
* Add additional validations
* Add cert ref validation
* Add protobuf definitions
* Tabs to spaces
* Fix up field types
* Add API structs
* Move struct fields around a bit
* Add validation for BoundAPIGateway
* drop trailing whitespace
* APIGateway TCPRoute validation (#15855)
* Add APIGateway validation
* Fix comment
* Add additional validations
* Add cert ref validation
* Add protobuf definitions
* Tabs to spaces
* Fix up field types
* Add API structs
* Move struct fields around a bit
* Add TCPRoute normalization and validation
* Address PR feedback
* Add forgotten Status
* Add some more field docs in api package
* Fix test
* Fix bad merge
* Remove duplicate helpers
* Fix up proto defs
* Fix up stray changes
* remove extra newline
---------
Co-authored-by: Thomas Eckert <teckert@hashicorp.com>
Co-authored-by: Sarah Alsmiller <sarah.alsmiller@hashicorp.com>
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
Co-authored-by: sarahalsmiller <100602640+sarahalsmiller@users.noreply.github.com>
* Add Tproxy support to Envoy Extensions (this is needed for service to service validation)
* Add validation for Envoy configuration for an upstream service
* Use both /config_dump and /cluster to validate Envoy configuration
This is because of a bug in Envoy where the EndpointsConfigDump does not
include a cluster_name, making it impossible to match an endpoint to
verify it exists.
This removes endpoints support for builtin extensions since only the
validate plugin was using it, and it is no longer used. It also removes
test cases for endpoint validation. Endpoints validation now only occurs
in the top level test from config_dump and clusters json files.
Co-authored-by: Eric <eric@haberkorn.co>
* remove legacy tokens
* Update test comment
Co-authored-by: Paul Glass <pglass@hashicorp.com>
* fix imports
* update docs for additional CLI changes
* add test case for anonymous token
* set deprecated api fields to json ignore and fix patch errors
* update changelog to breaking-change
* fix import
* update api docs to remove legacy reference
* fix docs nav data
---------
Co-authored-by: Paul Glass <pglass@hashicorp.com>
* updated builtin extension to parse region directly from ARN
- added a unit test
- added some comments/light refactoring
* updated golden files with proper ARNs
- ARNs need to be right format now that they are being processed
* updated tests and integration tests
- removed 'region' from all EnvoyExtension arguments
- added properly formatted ARN which includes the same region found in the removed "Region" field: 'us-east-1'
* Stub out bind code
* Move into a new package and flesh out binding
* Fill in the actual binding logic
* Bind to all listeners if not specified
* Move bind code up to gateways package
* Fix resource type check
* Add UpsertRoute to listeners
* Add RemoveRoute to listener
* Implement binding as associated functions
* Pass in gateways to BindRouteToGateways
* Add a bunch of tests
* Fix hopping from one listener on a gateway to another
* Remove parents from HTTPRoute
* Apply suggestions from code review
* Fix merge conflict
* Unify binding into a single variadic function 🙌 @nathancoleman
* Remove vestigial error
* Add TODO on protocol check
* rate limit test
* Have tests for the 3 modes
* added assertions for logs and metrics
* add comments to test sections
* add check for rate limit exceeded text in log assertion section.
* fix linting error
* updating test to use KV get and put. move log assertion tolast.
* Adding logging for blocking messages in enforcing mode. refactoring tests.
* modified test description
* formatting
* Apply suggestions from code review
Co-authored-by: Dan Upton <daniel@floppy.co>
* Update test/integration/consul-container/test/ratelimit/ratelimit_test.go
Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
* expand log checking so that it ensures both logs are they when they are supposed to be and not there when they are not expected to be.
* add retry on test
* Warn once when rate limit exceed regardless of enforcing vs permissive.
* Update test/integration/consul-container/test/ratelimit/ratelimit_test.go
Co-authored-by: Dan Upton <daniel@floppy.co>
Co-authored-by: Dan Upton <daniel@floppy.co>
Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
* Stub Config Entries for Consul Native API Gateway (#15644)
* Add empty InlineCertificate struct and protobuf
* apigateway stubs
* Stub HTTPRoute in api pkg
* Stub HTTPRoute in structs pkg
* Simplify api.APIGatewayConfigEntry to be consistent w/ other entries
* Update makeConfigEntry switch, add docstring for HTTPRouteConfigEntry
* Add TCPRoute to MakeConfigEntry, return unique Kind
* Stub BoundAPIGatewayConfigEntry in agent
* Add RaftIndex to APIGatewayConfigEntry stub
* Add new config entry kinds to validation allow-list
* Add RaftIndex to other added config entry stubs
* Update usage metrics assertions to include new cfg entries
* Add Meta and acl.EnterpriseMeta to all new ConfigEntry types
* Remove unnecessary Services field from added config entry types
* Implement GetMeta(), GetEnterpriseMeta() for added config entry types
* Add meta field to proto, name consistently w/ existing config entries
* Format config_entry.proto
* Add initial implementation of CanRead + CanWrite for new config entry types
* Add unit tests for decoding of new config entry types
* Add unit tests for parsing of new config entry types
* Add unit tests for API Gateway config entry ACLs
* Return typed PermissionDeniedError on BoundAPIGateway CanWrite
* Add unit tests for added config entry ACLs
* Add BoundAPIGateway type to AllConfigEntryKinds
* Return proper kind from BoundAPIGateway
* Add docstrings for new config entry types
* Add missing config entry kinds to proto def
* Update usagemetrics_oss_test.go
* Use utility func for returning PermissionDeniedError
* EventPublisher subscriptions for Consul Native API Gateway (#15757)
* Create new event topics in subscribe proto
* Add tests for PBSubscribe func
* Make configs singular, add all configs to PBToStreamSubscribeRequest
* Add snapshot methods
* Add config_entry_events tests
* Add config entry kind to topic for new configs
* Add unit tests for snapshot methods
* Start adding integration test
* Test using the new controller code
* Update agent/consul/state/config_entry_events.go
* Check value of error
* Add controller stubs for API Gateway (#15837)
* update initial stub implementation
* move files, clean up mutex references
* Remove embed, use idiomatic names for constructors
* Remove stray file introduced in merge
* Add APIGateway validation (#15847)
* Add APIGateway validation
* Add additional validations
* Add cert ref validation
* Add protobuf definitions
* Fix up field types
* Add API structs
* Move struct fields around a bit
* APIGateway InlineCertificate validation (#15856)
* Add APIGateway validation
* Add additional validations
* Add protobuf definitions
* Tabs to spaces
* Add API structs
* Move struct fields around a bit
* Add validation for InlineCertificate
* Fix ACL test
* APIGateway BoundAPIGateway validation (#15858)
* Add APIGateway validation
* Add additional validations
* Add cert ref validation
* Add protobuf definitions
* Fix up field types
* Add API structs
* Move struct fields around a bit
* Add validation for BoundAPIGateway
* APIGateway TCPRoute validation (#15855)
* Add APIGateway validation
* Add additional validations
* Add cert ref validation
* Add protobuf definitions
* Fix up field types
* Add API structs
* Add TCPRoute normalization and validation
* Add forgotten Status
* Add some more field docs in api package
* Fix test
* Format imports
* Rename snapshot test variable names
* Add plumbing for Native API GW Subscriptions (#16003)
Co-authored-by: Sarah Alsmiller <sarah.alsmiller@hashicorp.com>
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
Co-authored-by: sarahalsmiller <100602640+sarahalsmiller@users.noreply.github.com>
Co-authored-by: Andrew Stucki <andrew.stucki@hashicorp.com>
Fix configuration merging for implicit tproxy upstreams.
Change the merging logic so that the wildcard upstream has correct proxy-defaults
and service-defaults values combined into it. It did not previously merge all fields,
and the wildcard upstream did not exist unless service-defaults existed (it ignored
proxy-defaults, essentially).
Change the way we fetch upstream configuration in the xDS layer so that it falls back
to the wildcard when no matching upstream is found. This is what allows implicit peer
upstreams to have the correct "merged" config.
Change proxycfg to always watch local mesh gateway endpoints whenever a peer upstream
is found. This simplifies the logic so that we do not have to inspect the "merged"
configuration on peer upstreams to extract the mesh gateway mode.
Previously, we'd begin a session with the xDS concurrency limiter
regardless of whether the proxy was registered in the catalog or in
the server's local agent state.
This caused problems for users who run `consul connect envoy` directly
against a server rather than a client agent, as the server's locally
registered proxies wouldn't be included in the limiter's capacity.
Now, the `ConfigSource` is responsible for beginning the session and we
only do so for services in the catalog.
Fixes: https://github.com/hashicorp/consul/issues/15753
Enforce lowercase peer names.
Prior to this change peer names could be mixed case.
This can cause issues, as peer names are used as DNS labels
in various locations. It also caused issues with envoy
configuration.
* Protobuf Modernization
Remove direct usage of golang/protobuf in favor of google.golang.org/protobuf
Marshallers (protobuf and json) needed some changes to account for different APIs.
Moved to using the google.golang.org/protobuf/types/known/* for the well known types including replacing some custom Struct manipulation with whats available in the structpb well known type package.
This also updates our devtools script to install protoc-gen-go from the right location so that files it generates conform to the correct interfaces.
* Fix go-mod-tidy make target to work on all modules
- Fixes a panic when Operation.SourceAddr is nil (internal net/rpc calls)
- Adds proper HTTP response codes (429 and 503) for rate limit errors
- Makes the error messages clearer
- Enables automatic retries for rate-limit errors in the net/rpc stack
* inject logger and create logdrop sink
* init sink with an empty struct instead of nil
* wrap a logger instead of a sink and add a discard logger to avoid double logging
* fix compile errors
* fix linter errors
* Fix bug where log arguments aren't properly formatted
* Move log sink construction outside of handler
* Add prometheus definition and docs for log drop counter
Co-authored-by: Daniel Upton <daniel@floppy.co>
Fixes a bug introduced by #15346 where we'd always require an ACL
token even if ACLs were disabled because we were erroneously
treating `nil` identity as anonymous.
This is the OSS portion of enterprise PR 3822.
Adds a custom gRPC balancer that replicates the router's server cycling
behavior. Also enables automatic retries for RESOURCE_EXHAUSTED errors,
which we now get for free.
Adds automation for generating the map of `gRPC Method Name → Rate Limit Type`
used by the middleware introduced in #15550, and will ensure we don't forget
to add new endpoints.
Engineers must annotate their RPCs in the proto file like so:
```
rpc Foo(FooRequest) returns (FooResponse) {
option (consul.internal.ratelimit.spec) = {
operation_type: READ,
};
}
```
When they run `make proto` a protoc plugin `protoc-gen-consul-rate-limit` will
be installed that writes rate-limit specs as a JSON array to a file called
`.ratelimit.tmp` (one per protobuf package/directory).
After running Buf, `make proto` will execute a post-process script that will
ingest all of the `.ratelimit.tmp` files and generate a Go file containing the
mappings in the `agent/grpc-middleware` package. In the enterprise repository,
it will write an additional file with the enterprise-only endpoints.
If an engineer forgets to add the annotation to a new RPC, the plugin will
return an error like so:
```
RPC Foo is missing rate-limit specification, fix it with:
import "proto-public/annotations/ratelimit/ratelimit.proto";
service Bar {
rpc Foo(...) returns (...) {
option (hashicorp.consul.internal.ratelimit.spec) = {
operation_type: OPERATION_READ | OPERATION_WRITE | OPERATION_EXEMPT,
};
}
}
```
In the future, this annotation can be extended to support rate-limit
category (e.g. KV vs Catalog) and to determine the retry policy.
Previously, these endpoints required `service:write` permission on _any_
service as a sort of proxy for "is the caller allowed to participate in
the mesh?".
Now, they're called as part of the process of establishing a server
connection by any consumer of the consul-server-connection-manager
library, which will include non-mesh workloads (e.g. Consul KV as a
storage backend for Vault) as well as ancillary components such as
consul-k8s' acl-init process, which likely won't have `service:write`
permission.
So this commit relaxes those requirements to accept *any* valid ACL token
on the following gRPC endpoints:
- `hashicorp.consul.dataplane.DataplaneService/GetSupportedDataplaneFeatures`
- `hashicorp.consul.serverdiscovery.ServerDiscoveryService/WatchServers`
- `hashicorp.consul.connectca.ConnectCAService/WatchRoots`
Fix agent cache incorrectly notifying unchanged protobufs.
This change fixes a situation where the protobuf private fields
would be read by reflect.DeepEqual() and indicate data was modified.
This resulted in change notifications being fired every time, which
could cause performance problems in proxycfg.
This gets the extensions information for the local service into the snapshot and ExtensionConfigurations for a proxy. It grabs the extensions from config entries and puts them in structs.NodeService.Proxy field, which already is copied into the config snapshot.
Also:
* add EnvoyExtensions to api.AgentService so that it matches structs.NodeService
* extensions: refactor PluginConfiguration into a more generic type
ExtensionConfiguration
Also:
* adds endpoints configuration to lambda golden tests
* uses string constant for builtin/aws/lambda
Co-authored-by: Eric <eric@haberkorn.co>
* Rate limiting handler - ensure configuration has changed before modifying limiters
* Updating test to validate arguments to UpdateConfig
* Removing duplicate test. Updating mock.
* Renaming NullRateLimiter to NullRequestLimitsHandler
* Rate Limit Handler - ensure rate limiting is not in the code path when not configured
* Update agent/consul/rate/handler.go
Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
* formatting handler.go
* Rate limiting handler - ensure configuration has changed before modifying limiters
* Updating test to validate arguments to UpdateConfig
* Removing duplicate test. Updating mock.
* adding logging for when UpdateConfig is called but the config has not changed.
* Update agent/consul/rate/handler.go
Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
* Update agent/consul/rate/handler_test.go
Co-authored-by: Dan Upton <daniel@floppy.co>
* modifying existing variable name based on pr feedback
* updating a broken merge conflict;
Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
Co-authored-by: Dan Upton <daniel@floppy.co>
* Rate limiting handler - ensure configuration has changed before modifying limiters
* Updating test to validate arguments to UpdateConfig
* Removing duplicate test. Updating mock.
* adding logging for when UpdateConfig is called but the config has not changed.
* Update agent/consul/rate/handler.go
Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
* add functions for returning the max and min Envoy major versions
- added an UnsupportedEnvoyVersions list
- removed an unused error from TestDetermineSupportedProxyFeaturesFromString
- modified minSupportedVersion to use the function for getting the Min Envoy major version. Using just the major version without the patch is equivalent to using `.0`
* added a function for executing the envoy --version command
- added a new exec.go file to not be locked to unix system
* added envoy version check when using consul connect envoy
* added changelog entry
* added docs change
The new balancer is a patched version of gRPC's default pick_first balancer
which removes the behavior of preserving the active subconnection if
a list of new addresses contains the currently active address.
Dan Stough
Andrew Stucki
Nitya Dhanushkodi
Thomas Eckert
Derek Menteer
Nathan Coleman
Semir Patel
skpratt
Kyle Havlovitz
Paul Banks
cskh
John Eikenberry
wangxinyi7
Dhia Ayachi
Poonam Jadhav
sarahalsmiller
Paul Glass
Dan Upton
Michael Wilkerson
Ronald
John Murret
Chris Thain
Chris S. Kim
Matt Keeler
Eric Haberkorn
Nick Irvine
Florian Apolloner