Commit Graph

349 Commits

Author SHA1 Message Date
Mike Morris 6473501517 Revert "upgrade golang crypto from 0.0.0-20200930160638-afb6bcd081ae => v0.0.0-20210513164829-c07d793c2f9a (#10392)"
This reverts commit 7242f61b9c.
2021-06-15 16:41:13 -04:00
Dhia Ayachi 7242f61b9c
upgrade golang crypto from 0.0.0-20200930160638-afb6bcd081ae => v0.0.0-20210513164829-c07d793c2f9a (#10392) 2021-06-14 13:04:09 -04:00
Dhia Ayachi 9e4d7a3d26
generate a single debug file for a long duration capture (#10279) (#10360)
* debug: remove the CLI check for debug_enabled

The API allows collecting profiles even debug_enabled=false as long as
ACLs are enabled. Remove this check from the CLI so that users do not
need to set debug_enabled=true for no reason.

Also:
- fix the API client to return errors on non-200 status codes for debug
  endpoints
- improve the failure messages when pprof data can not be collected

Co-Authored-By: Dhia Ayachi <dhia@hashicorp.com>

* remove parallel test runs

parallel runs create a race condition that fail the debug tests

* snapshot the timestamp at the beginning of the capture

- timestamp used to create the capture sub folder is snapshot only at the beginning of the capture and reused for subsequent captures
- capture append to the file if it already exist

* Revert "snapshot the timestamp at the beginning of the capture"

This reverts commit c2d03346

* Refactor captureDynamic to extract capture logic for each item in a different func

* snapshot the timestamp at the beginning of the capture

- timestamp used to create the capture sub folder is snapshot only at the beginning of the capture and reused for subsequent captures
- capture append to the file if it already exist

* Revert "snapshot the timestamp at the beginning of the capture"

This reverts commit c2d03346

* Refactor captureDynamic to extract capture logic for each item in a different func

* extract wait group outside the go routine to avoid a race condition

* capture pprof in a separate go routine

* perform a single capture for pprof data for the whole duration

* add missing vendor dependency

* add a change log and fix documentation to reflect the change

* create function for timestamp dir creation and simplify error handling

* use error groups and ticker to simplify interval capture loop

* Logs, profile and traces are captured for the full duration. Metrics, Heap and Go routines are captured every interval

* refactor Logs capture routine and add log capture specific test

* improve error reporting when log test fail

* change test duration to 1s

* make time parsing in log line more robust

* refactor log time format in a const

* test on log line empty the earliest possible and return

Co-authored-by: Freddy <freddygv@users.noreply.github.com>

* rename function to captureShortLived

* more specific changelog

Co-authored-by: Paul Banks <banks@banksco.de>

* update documentation to reflect current implementation

* add test for behavior when invalid param is passed to the command

* fix argument line in test

* a more detailed description of the new behaviour

Co-authored-by: Paul Banks <banks@banksco.de>

* print success right after the capture is done

* remove an unnecessary error check

Co-authored-by: Daniel Nephin <dnephin@hashicorp.com>

* upgraded github.com/google/pprof v0.0.0-20181206194817-3ea8567a2e57 => v0.0.0-20210601050228-01bbb1931b22

Co-authored-by: Daniel Nephin <dnephin@hashicorp.com>
Co-authored-by: Freddy <freddygv@users.noreply.github.com>
Co-authored-by: Paul Banks <banks@banksco.de>

Co-authored-by: Daniel Nephin <dnephin@hashicorp.com>
Co-authored-by: Freddy <freddygv@users.noreply.github.com>
Co-authored-by: Paul Banks <banks@banksco.de>
2021-06-07 15:51:57 -04:00
Kyle Havlovitz b8038d1814 Update vault CA for latest api client 2020-10-07 16:40:27 -04:00
Kyle Havlovitz c7981ac932 vendor: Update vault api package 2020-10-07 16:40:27 -04:00
Mike Morris 26d61c6b13
chore(deps): update gopsutil to v2.20.9 (#8843) (#8859)
* core(deps): bump golang.org/x/sys

To resolve /go/pkg/mod/github.com/shirou/gopsutil@v2.20.9+incompatible/host/host_bsd.go:20:13: undefined: unix.SysctlTimeval

* chore(deps): make update-vendor
2020-10-07 14:52:50 -04:00
Daniel Nephin 62870d57d8 Upgrade x/time
To fix the build. We auto-backported a change that requires a newer version of x/time
2020-08-28 15:17:23 -04:00
Hans Hasselberg bc5e2ddfc3 add primary keys to list keyring (#8522)
During gossip encryption key rotation it would be nice to be able to see if all nodes are using the same key. This PR adds another field to the json response from `GET v1/operator/keyring` which lists the primary keys in use per dc. That way an operator can tell when a key was successfully setup as primary key.

Based on https://github.com/hashicorp/serf/pull/611 to add primary key to list keyring output:

```json
[
  {
    "WAN": true,
    "Datacenter": "dc2",
    "Segment": "",
    "Keys": {
      "0OuM4oC3Os18OblWiBbZUaHA7Hk+tNs/6nhNYtaNduM=": 6,
      "SINm887hKTzmMWeBNKTJReaTLX3mBEJKriDyt88Ad+g=": 6
    },
    "PrimaryKeys": {
      "SINm887hKTzmMWeBNKTJReaTLX3mBEJKriDyt88Ad+g=": 6
    },
    "NumNodes": 6
  },
  {
    "WAN": false,
    "Datacenter": "dc2",
    "Segment": "",
    "Keys": {
      "0OuM4oC3Os18OblWiBbZUaHA7Hk+tNs/6nhNYtaNduM=": 8,
      "SINm887hKTzmMWeBNKTJReaTLX3mBEJKriDyt88Ad+g=": 8
    },
    "PrimaryKeys": {
      "SINm887hKTzmMWeBNKTJReaTLX3mBEJKriDyt88Ad+g=": 8
    },
    "NumNodes": 8
  },
  {
    "WAN": false,
    "Datacenter": "dc1",
    "Segment": "",
    "Keys": {
      "0OuM4oC3Os18OblWiBbZUaHA7Hk+tNs/6nhNYtaNduM=": 3,
      "SINm887hKTzmMWeBNKTJReaTLX3mBEJKriDyt88Ad+g=": 8
    },
    "PrimaryKeys": {
      "SINm887hKTzmMWeBNKTJReaTLX3mBEJKriDyt88Ad+g=": 8
    },
    "NumNodes": 8
  }
]
```

I intentionally did not change the CLI output because I didn't find a good way of displaying this information. There are a couple of options that we could implement later:
* add a flag to show the primary keys
* add a flag to show json output

Fixes #3393.
2020-08-18 07:51:22 +00:00
s-christoff 35cadfa56d Update Go-Metrics 0.3.4 (#8478) 2020-08-11 21:07:05 -05:00
Kyle Havlovitz b1e73e18be vendor: Update github.com/armon/go-metrics to v0.3.3 2020-07-23 13:08:49 -07:00
Matt Keeler 56b46436c1
Backport: #8362 (#8366)
Refactoring of the agentpb package.

First move the whole thing to the top-level proto package name.

Secondly change some things around internally to have sub-packages.
# Conflicts:
#	agent/consul/state/acl.go
#	agent/consul/state/acl_test.go
2020-07-23 12:44:27 -04:00
Matt Keeler f52676e78b Update mapstructure to v1.3.3 (#8361)
This was done in preparation for another PR where I was running into https://github.com/mitchellh/mapstructure/issues/202 and implemented a fix for the library.
2020-07-22 19:14:05 +00:00
R.B. Boyer 0ec3e2ebf4 gossip: Avoid issue where two unique leave events for the same node could lead to infinite rebroadcast storms (#8343)
bump serf to v0.9.3 to include fix for https://github.com/hashicorp/serf/pull/606
2020-07-21 20:49:09 +00:00
R.B. Boyer 8a5680aaf0
connect: upgrade github.com/envoyproxy/go-control-plane to v0.9.5 (#8247)
cherry-pick of #8165 onto origin/release/1.8.x
2020-07-07 16:22:30 -05:00
Matt Keeler 8853e38c72
Various go routine leak fixes 2020-06-25 09:36:14 -04:00
Matt Keeler 1fa4d570d2 Update testify to v1.5.1 2020-06-19 11:04:00 -04:00
R.B. Boyer 1efafd7523
acl: add auth method for JWTs (#7846) 2020-05-11 20:59:29 -05:00
Mike Morris 291e6af33a
vendor: revert golang.org/x/sys bump to avoid FreeBSD regression (#7780) 2020-05-05 09:26:17 +02:00
Hans Hasselberg b5eab19183
vendor: fix case issue (#7777) 2020-05-04 21:39:01 +02:00
Hans Hasselberg c4093c87cc
agent: don't let left nodes hold onto their node-id (#7747) 2020-05-04 18:39:08 +02:00
Matt Keeler daec810e34
Merge pull request #7714 from hashicorp/oss-sync/msp-agent-token 2020-05-04 11:33:50 -04:00
Matt Keeler 55050beedb
Update go-discover dependency (#7731) 2020-05-04 10:59:48 -04:00
Matt Keeler 8c545b5206
Update mapstructure to v1.2.3
This release contains a fix to prevent duplicate keys in the Metadata after decoding where the output value contains pointer fields.
2020-04-28 09:33:16 -04:00
R.B. Boyer b989967791
cli: ensure that 'snapshot save' is fsync safe and also only writes to the requested file on success (#7698) 2020-04-24 17:34:47 -05:00
R.B. Boyer 5f1518c37c
cli: fix usage of gzip.Reader to better detect corrupt snapshots during save/restore (#7697) 2020-04-24 17:18:56 -05:00
Daniel Nephin 50d73c2674 Update github.com/joyent/triton-go to latest
There was an RSA private key used for testing included in the old
version. This commit updates it to a version that does not include the
key so that the key is not detected by tools which scan the Consul
binary for private keys.

Commands run:

go get github.com/joyent/triton-go@6801d15b779f042cfd821c8a41ef80fc33af9d47
make update-vendor
2020-04-16 12:34:29 -04:00
Daniel Nephin 5023a3b178 cli: send requested help text to stdout
This behaviour matches the GNU CLI standard:
http://www.gnu.org/prep/standards/html_node/_002d_002dhelp.html
2020-03-26 15:27:34 -04:00
R.B. Boyer 6adad71125
wan federation via mesh gateways (#6884)
This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch:

There are several distinct chunks of code that are affected:

* new flags and config options for the server

* retry join WAN is slightly different

* retry join code is shared to discover primary mesh gateways from secondary datacenters

* because retry join logic runs in the *agent* and the results of that
  operation for primary mesh gateways are needed in the *server* there are
  some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur
  at multiple layers of abstraction just to pass the data down to the right
  layer.

* new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers

* the function signature for RPC dialing picked up a new required field (the
  node name of the destination)

* several new RPCs for manipulating a FederationState object:
  `FederationState:{Apply,Get,List,ListMeshGateways}`

* 3 read-only internal APIs for debugging use to invoke those RPCs from curl

* raft and fsm changes to persist these FederationStates

* replication for FederationStates as they are canonically stored in the
  Primary and replicated to the Secondaries.

* a special derivative of anti-entropy that runs in secondaries to snapshot
  their local mesh gateway `CheckServiceNodes` and sync them into their upstream
  FederationState in the primary (this works in conjunction with the
  replication to distribute addresses for all mesh gateways in all DCs to all
  other DCs)

* a "gateway locator" convenience object to make use of this data to choose
  the addresses of gateways to use for any given RPC or gossip operation to a
  remote DC. This gets data from the "retry join" logic in the agent and also
  directly calls into the FSM.

* RPC (`:8300`) on the server sniffs the first byte of a new connection to
  determine if it's actually doing native TLS. If so it checks the ALPN header
  for protocol determination (just like how the existing system uses the
  type-byte marker).

* 2 new kinds of protocols are exclusively decoded via this native TLS
  mechanism: one for ferrying "packet" operations (udp-like) from the gossip
  layer and one for "stream" operations (tcp-like). The packet operations
  re-use sockets (using length-prefixing) to cut down on TLS re-negotiation
  overhead.

* the server instances specially wrap the `memberlist.NetTransport` when running
  with gateway federation enabled (in a `wanfed.Transport`). The general gist is
  that if it tries to dial a node in the SAME datacenter (deduced by looking
  at the suffix of the node name) there is no change. If dialing a DIFFERENT
  datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh
  gateways to eventually end up in a server's :8300 port.

* a new flag when launching a mesh gateway via `consul connect envoy` to
  indicate that the servers are to be exposed. This sets a special service
  meta when registering the gateway into the catalog.

* `proxycfg/xds` notice this metadata blob to activate additional watches for
  the FederationState objects as well as the location of all of the consul
  servers in that datacenter.

* `xds:` if the extra metadata is in place additional clusters are defined in a
  DC to bulk sink all traffic to another DC's gateways. For the current
  datacenter we listen on a wildcard name (`server.<dc>.consul`) that load
  balances all servers as well as one mini-cluster per node
  (`<node>.server.<dc>.consul`)

* the `consul tls cert create` command got a new flag (`-node`) to help create
  an additional SAN in certs that can be used with this flavor of federation.
2020-03-09 15:59:02 -05:00
R.B. Boyer fdb6b80672
Switch to go 1.13.7 (#7262)
- You can no longer cross submodule boundaries with ./... in go
  subcommands like `go list` or `go test`. The makefile and CI scripts
  were updated accordingly.

- Also of note: `go mod vendor` now omits things build ignored.
2020-02-12 10:15:24 -06:00
R.B. Boyer 73ba5d9990
make the TestRPC_RPCMaxConnsPerClient test less flaky (#7255) 2020-02-10 15:13:53 -06:00
Matt Keeler 58befa754b
Update to miekg/dns v1.1.26 (#7252) 2020-02-10 15:14:27 -05:00
Hans Hasselberg 649ffcb66f
memberlist: vendor v0.1.6 to pull in new state: stateLeft (#7184) 2020-02-03 11:02:13 +01:00
Hans Hasselberg 5531678e9e
Security fixes (#7182)
* Mitigate HTTP/RPC Services Allow Unbounded Resource Usage

Fixes #7159.

Co-authored-by: Matt Keeler <mkeeler@users.noreply.github.com>
Co-authored-by: Paul Banks <banks@banksco.de>
2020-01-31 11:19:37 -05:00
Chris Piraino 401221de58
Allow users to configure either unstructured or JSON logging (#7130)
* hclog Allow users to choose between unstructured and JSON logging
2020-01-28 17:50:41 -06:00
Michel Vocks 6681be918a api: add option to set TLS options in-memory for API client (#7093)
This PR adds the option to set in-memory certificates to the API client instead of requiring the certificate to be stored on disk in a file.

This allows us to define API client TLS options per Consul secret backend in Vault.
Related issue hashicorp/vault#4800
2020-01-28 11:54:49 +01:00
Hans Hasselberg 9c1361c02b
raft: update raft to v1.1.2 (#7079)
* update raft
* use hclogger for raft.
2020-01-20 13:58:02 +01:00
Wim 4f5d5020b8 dns: fix memoryleak by upgrading outdated miekg/dns (#6748)
* Add updated github.com/miekg/dns to go modules
* Add updated github.com/miekg/dns to vendor
* Fix github.com/miekg/dns api breakage
* Decrease size when trimming UDP packets
Need more room for the header(?), if we don't decrease the size we get an
"overflow unpacking uint32" from the dns library
* Fix dns truncate tests with api changes
* Make windows build working again. Upgrade x/sys and x/crypto and vendor
This upgrade is needed because of API breakage in x/sys introduced
by the minimal x/sys dependency of miekg/dns

This API breakage has been fixed in commit
855e68c859
2019-12-16 22:31:27 +01:00
Mike Morris 66b8c20990
Bump go-discover to support EC2 Metadata Service v2 (#6865)
Refs https://github.com/hashicorp/go-discover/pull/128

* deps: add replace directive for gocheck

Transitive dep, source at https://launchpad.net/gocheck indicates
project moved. This also avoids a dependency on bzr when fetching
modules. Refs https://github.com/hashicorp/consul/pull/6818

* deps: make update-vendor

* test: update retry-join expected names from go-discover
2019-12-04 11:59:16 -05:00
Paul Banks cd1b613352
connect: Add AWS PCA provider (#6795)
* Update AWS SDK to use PCA features.

* Add AWS PCA provider

* Add plumbing for config, config validation tests, add test for inheriting existing CA resources created by user

* Unparallel the tests so we don't exhaust PCA limits

* Merge updates

* More aggressive polling; rate limit pass through on sign; Timeout on Sign and CA create

* Add AWS PCA docs

* Fix Vault doc typo too

* Doc typo

* Apply suggestions from code review

Co-Authored-By: R.B. Boyer <rb@hashicorp.com>
Co-Authored-By: kaitlincarter-hc <43049322+kaitlincarter-hc@users.noreply.github.com>

* Doc fixes; tests for erroring if State is modified via API

* More review cleanup

* Uncomment tests!

* Minor suggested clean ups
2019-11-21 17:40:29 +00:00
Paul Banks d7329097b2
Change CA Configure struct to pass Datacenter through (#6775)
* Change CA Configure struct to pass Datacenter through

* Remove connect/ca/plugin as we don't have immediate plans to use it.

We still intend to one day but there are likely to be several changes to the CA provider interface before we do so it's better to rebuild from history when we do that work properly.

* Rename PrimaryDC; fix endpoint in secondary DCs
2019-11-18 14:22:19 +00:00
Matt Keeler 7f00fc60f1
Dependency: Update github.com/hashicorp/go-memdb to v1.0.3 (#6626) 2019-10-16 12:10:12 -04:00
Sarah Christoff 5e26971864
Prune Unhealthy Agents (#6571)
* Add -prune flag to ForceLeave
2019-10-04 16:10:02 -05:00
Matt Keeler 28221f66f2
Use encoding/json instead of jsonpb even for protobuf types (#6572)
This only works so long as we use simplistic protobuf types. Constructs such as oneof or Any types that require type annotations for decoding properly will fail hard but that is by design. If/when we want to use any of that we will probably need to consider a v2 API.
2019-10-02 15:32:15 -04:00
Matt Keeler abed91d069
Generate JSON and Binary Marshalers for Protobuf Types (#6564)
* Add JSON and Binary Marshaler Generators for Protobuf Types

* Generate files with the correct version of gogo/protobuf

I have pinned the version in the makefile so when you run make tools you get the right version. This pulls the version out of go.mod so it should remain up to date.

The version at the time of this commit we are using is v1.2.1

* Fixup some shell output

* Update how we determine the version of gogo
This just greps the go.mod file instead of expecting the go mod cache to already be present

* Fixup vendoring and remove no longer needed json encoder functions
2019-09-30 15:39:20 -04:00
Matt Keeler 76cf54068b
Expand the QueryOptions and QueryMeta interfaces (#6545)
In a previous PR I made it so that we had interfaces that would work enough to allow blockingQueries to work. However to complete this we need all fields to be settable and gettable.

Notes:
   • If Go ever gets contracts/generics then we could get rid of all the Getters/Setters
   • protoc / protoc-gen-gogo are going to generate all the getters for us.
   • I copied all the getters/setters from the protobuf funcs into agent/structs/protobuf_compat.go
   • Also added JSON marshaling funcs that use jsonpb for protobuf types.
2019-09-26 09:55:02 -04:00
R.B. Boyer 796de297c8
connect: intermediate CA certs generated with the vault provider lack URI SANs (#6491)
This only affects vault versions >=1.1.1 because the prior code
accidentally relied upon a bug that was fixed in
https://github.com/hashicorp/vault/pull/6505

The existing tests should have caught this, but they were using a
vendored copy of vault version 0.10.3. This fixes the tests by running
an actual copy of vault instead of an in-process copy. This has the
added benefit of changing the dependency on vault to just vault/api.

Also update VaultProvider to use similar SetIntermediate validation code
as the ConsulProvider implementation.
2019-09-23 12:04:40 -05:00
Matt Keeler 51dcd126b7
Add support for implementing new requests with protobufs instea… (#6502)
* Add build system support for protobuf generation

This is done generically so that we don’t have to keep updating the makefile to add another proto generation.

Note: anything not in the vendor directory and with a .proto extension will be run through protoc if the corresponding namespace.pb.go file is not up to date.

If you want to rebuild just a single proto file you can do so with: make proto-rebuild PROTOFILES=<list of proto files to rebuild>

Providing the PROTOFILES var will override the default behavior of finding all the .proto files.

* Start adding types to the agent/proto package

These will be needed for some other work and are by no means comprehensive.

* Add ability to resolve/fixup the agentpb.ACLLinks structure in the state store.

* Use protobuf marshalling of raft requests instead of msgpack for protoc generated types.

This does not change any encoding of existing types.

* Removed structs package automatically encoding with protobuf marshalling

Instead the caller of raftApply that wants to opt-in to protobuf encoding will have to call `raftApplyProtobuf`

* Run update-vendor to fixup modules.txt

Nothing changed as far as dependencies go but the ordering of modules in that file depends on the time they are first seen and its not alphabetical.

* Rename some things and implement the structs.RPCInfo interface bits

agentpb.QueryOptions and agentpb.WriteRequest implement 3 of the 4 RPCInfo funcs and the new TargetDatacenter message type implements the fourth.

* Use the right encoding function.

* Renamed agent/proto package to agent/agentpb to prevent package name conflicts

* Update modules.txt to fix ordering

* Change blockingQuery to take in interfaces for the query options and meta

* Add %T to error output.

* Add/Update some comments
2019-09-20 14:37:22 -04:00
Matt Keeler ccfdb99d00
Update memberlist to v0.1.5 (#6479) 2019-09-12 10:28:57 -04:00
Sarah Adams 4ed5515fca
refactor & add better retry logic to NewTestAgent (#6363)
Fixes #6361
2019-09-03 15:05:51 -07:00
Aaron Bennett 430dab8c37 update dependencies for enterprise change (#6395) 2019-08-26 15:22:28 -04:00